*He Kenya Gazette

Total Page:16

File Type:pdf, Size:1020Kb

*He Kenya Gazette -.. - wfe, / '. !j; ( . X. : % Z' . > ' / g/x i %,rs.* j' v ) ... g <m. ( A vw 1 ' ' > R A * *. W > . a ee *H E K E N YA G A ZET TE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.RO.) W- I*- cV--Ao.'à5 NAIRPBI, M th M ay, 2003 . Price Sh. 40 . cox raxTs GAZETTE NOTICES GAZE'ITE NOTICES--IC/YJ.) PAGE PAGE The Accouptants Act--Appoi'n tment . .. .. .- .. .. .. .. .. .. .. 1 I68 TM Afrkan. Christian M aniage and Divorce Act Ministers Licensed to Celebrûtc Maniages .. .. .. .. 1223-1224 Th: Architects and Quantity Surveyors Act-Appoint- ment of Members of tb.e Board .- e. .. .. .. ...' .. .. .. .. 1168 Th? Companies Act Members' Volunury W'inding- UP a!l(1 I7i l)1tl l'k f(rtrtirkérs.. .. .. .. .. .. .. .. .. .. .. .. .. 1 :! :!z1-- 1 :!:!-é5 Task Force on Micro and Small Enterpn'ses Appoint- I-4>()1t1 (E)tl Nfthîzllxlttl!t tpllticnz.. .. .. .. .. .. .. .. .. .. .. .. l ;5:! é; The Exchequer and Audit Act Ap 'ntment of .. Revocation of Power of Attorney .. .. .. .. .. .. .. .. .. 1225 (E: lltl- lnnxlt 11 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .'. .. .. .. .. .. 1 168 . X' Change of Names .. .. ., .. .. .. .. .. .. .. .. .- .. .. .. 1225 . -T%e Land Disputey Tribunals Ac1 Cancellation .. .. ... .. 1 l68 The Oaths.aùd Stamtory Declarations Act Commissiolw 1 168-1 169 The Regis-tratiön of Titles Act Isgue of Provisional SUPPLEMENT No. 47 flerti f:iCaIEtIS y etC . .. .. .. .. .' 1 1 69- 1 1 70 luegislative Supplement LE/AL NOTICE N0. PAGE The Registered l >nd Act issue of New Land Title 56' .-.The Stamp Duty Ad- Exemption.. .. .. .. .. .. 151 ITII)tI (1 S: tlt().. .. .. .. .. ... .. .. ... .. .. .. .. .. .. ... 1 1 1!()-- 1 1 */ S! 57- The Betting, Loiteries and Gaming (Amendment) The Customs and Excise Act--Approved Manufacturers 11 (:éitlllttillrls. :!()4):5 .- .. .. .. .. .. .. .. .. ,. .. and 'Prldllcel's .. .. .. .. .. .. .. .. .. .. .. ., .e . .. 1 173 The Customs and Excise Department Salr by Public khkll Ction, etc .. .. ., .. .. .. .. .. ., .. .. .. .. .. .. .. .. .. .. .. .. 1 1 T? 51-- 1 1 E; 15 SUPPLEMENT Nm 48 Prlyhale and Xdministration .. .. .. .. ,. .. .- .. e. .. .. .. .. .. .. .. 1 1 85-1208 u gislative Supplement LEGAL NOTICE NO. PAGE The Standards Ad Declaration of Kenya Standards .. .. 1209-1219 58- The Cent/al 'Bank of Kenya Act- Descriptlon @ . x The 1 >nd Acquisition Act--lntention to Acqu. ire Land, of New Issue of Fifty, Fivr Hundred and One klt (t. , .. ,. .. .. .. ..' .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1 :! 1 61-- 1 11 ;! 1 Thousand Shillings Currency Notes .. .. .. .. n e Co-operative Societies Act lnquiry Orders, e1c....,. 1221-1 222 59- The Stamp Duty Act- n emption.. '.. .. .. .. The Physical Planning Act Completion of Develop- 60-The Imports, Exports -and Essential Supplies lnent Plan, Ctc . .. .. .. .. .. , . .. .. .. .. .. .. .. 1 222- I 223 (Conirol of Essenti'al Supplies) Order, 2003 . .. 158 (1 167 1 168 , THE KENYA GAZE'I'TE 30th M ay, 20. 03 . GAzrl'rE NOTICE NO. 3454 Gztzsrro No'rlcE No. 3457 . Tl1E ACCOUNTANTS ACT 'rl.m EXCHEQUER AND AUDIT ACT (Cap. 5.31) (Cap. 412) APPOINTMENT Tc EXCX QUER AND AUDIT (PUBLIC PROCUREMEND IN FNERCISE pssa avjoxs, 2m 1 of the powers conferrèd by sectioh 15 (1) of the . Accountants Act, the Minister for Finance aàpoints-' ' IZ'Y' 51 &.f2001) Exos 0. OYAYA THE MIMSTRY OF HOME AFFAIRS tobe R member of the Examinations' Board, for a period of two (2) APPOINTMENT OF CHAIRMAN years, with effect from the lst March, 2003. Ix ExsRcjsE of the powers conferred by regûlation 6 of the Dated the 15th May, 2003. EXChCQUW and Audh (Rlblic Proctlrement) Rtgulations, 2X 1,- the Permanent Secretary, Ministry of Home Affairs appoints- DAVID MW IRARIA, x sovoxcm Mînisterfor Finance. ' - - .. to be tjje clolrman of tlw M inisterial Tender Commiuee. GAZETI'E NOTICE NO. 3455 Dated the 14th May, 2003. Tlœ ARCHITECTS AND QUANTITY SURVEYORS ACT S . M. MWM JKO, (CY . 525) permanent secretao, APPOINTMENT OF MEMBERS OFTHE BOARD Ministry (.///II??Y Agairs. IN EXERCISE of 'the powers conferred by section 4 of the M chitects an4 Quantity Surveyors Act the Minister for Roads, Public GAZETTE NOTICE NO. 346.% W orks and Housing: . - TRE LM l7 DlspurEs TRIBIJNALS ACT (X Apxzts-- - - - - -(s o . j g sy-sgo Pltihp Yyango Sika, Vincent Barasa Walubayk . ctxc,n.z xvlox Reuben Georgc Muqoka Mutiso, NOTICE is given that Gazette Notice No. 2959 of 2003, in so far William Cheptmnln Klptoon; as it relates to the appointment of elders under tEe said Act, is (h) Approves the nominatiop by the Architecmral AisociAtion of cancelled. ' K enya (jf = ' ' Dated'the 21st May, 2003. Lee Gituto Knnln', Francis G. Mungai, E. M. 0. OPAR, Daniel Nyabuu Kimoro? . for Pemlaaezj? Secretary Sylvester Charles Murumba Wafula, Miafâ'lry ofu nds tzazf Settlement. as members of the Board; and (c) Apmints- GAZETTE NtyricE No. 3459 Philip Onyéngo Sika, TiIE OATHS AND STATUTORY bECLARATIONS ACT as çhairman of tlw Board; and ' (Cap.. 15) ' under section 6 of the Architects and Quantity Surveyors Act, A COMMISSION lppoints- To All to F/ltm Ihese Presents s'/l;llf Come Greeting: Kibasui Ndonga, BE IT KNOWN that on tI)E 20th Npvere r, 2002- as registrar of the Board. WILLIAM C. GITHAM Dated the 19th May, 2003. an advocate of the High Court of Kenya. was appointed to be a R. A. ODINGA, commissioner for oaths under the above-mentioned Act, for as lcmg as Ministerfor R/ctlt Public Ftvky tzad Housing. he continues to pmctice as such 'advocate and this commission is not revoked. GAZE-I'I'E NOTICE N0. 3456 Oiven under my hand and the seal of the coum on 20th Nove*ber, . Tlœ MINISTRY OF LABOUR AND IIUMAN RESOURCE ' 2002. DEVELOPMENT BERNARD CHUNGA, TASK FORC: ON MICRO AND SMALL ENXERPFISES Chieflustice. APPOINTMENTOF CHAIRMAN IT IS notified for the general information of the public that the Ministtr for Labour and Human Resource Development has GAZFI'E NOTICE NO. 1460 appointed- TIIE OATHS AND STATUTORY DECLARATIONS AW KATAMA MKANGI (PROF.) (Cap. 15) to lx the chairman of the Task Force on Micro and Small Enterprises A COMMBSION and revdke.s the appointment of T. C. 1. Ryan (Prof.)#. To All to Wào/I Thkse Presents 'g/la/f Come Greeting: Dated the 271 May, 2003. BE IT KNOW N that on the 20* November, 20022- N. M. BALALA. MinisterforLabour tlpzl PIGJP RODI OYK Human Resource Development. an ad vocatc of the 'High Court of Kenya, was appointeà to be a *G.N. 2958/2œ 3. commissioner for oaths under the àbove-*mentioned Act. for as long As 1 170 THE KENYA GA;EX'TE 30th May. 2003 ' . GAZEU E NOTICENO. 3468 been adduced to show that the land title deed issued thereof has been lost, notice is given that after the expiration'of sixty (60). days from the TIIE REGISTRATION OF TITLES ACT date hereof. I shall issue a new land title deed provided that no (Cap. 281, section 71) o' bjection has been received witbin tiat period. ISSUE OF A PROVISIONAL CERTIFICATE Dated the 30th May, 2003. W HEREAS Nyo za Managements Limited, a Iimited liability B. K. KAMW ARO, company incorporated in Kenya, hbving its registered oftke of P.O. Iond Ryistrar, Box 2082, Kisumu in the Republic of Kenya, is registerede as Ayarkdtzrltc/lxzilf/fc/Kçtïz?lhum Dtstricts. proprietor of that piece of land known as L.R. No. 3074, portion No. 104, 'situate.ln tht north-wes! of Muheroni in Kisumu District, by virtue of a grant regist:rtd as I.R. 279/1, and whereas suftoient evidence lias been adduced to show that the said grant issued thereof G.AZE'l-FE NOTICE NO has been losq notice is given that after the exgiration of ninety (90) . 3472 days from the date hereof, I shall issue a provislonal cErtiticate 'of title Ir vided that no objection has be'en received within that period. THE REGISTERED LAND ACT (Cap. 300. section 35) llted the 30th May, 2003. G. S. BIRONDU, ISSUE OF A NEW LAND TITLE DEED Registrar of Titles. Nairobi. W HEREAS Charles M uraguri Kuguiu, of P.O. Box 1676. Nakuru in the Rtpublic of Kenyae is registertd as yroprietor in absolute ownership interest of that jiece of land contàlning 3.24 hectares or ùxzmx xoencsxo. 3469 thereabout, situate in the dljtrict oî Nyandarua, rejistered under title No. Nyandarua/Melangine/6l 3, ànd whereas sufficient evidence has Tl'IE REGISTRATION OF TITLES ACT been adduced to show that thç Iand title deed ijsued thereof has been (Cap. 281, section 71) jost, notice js given that after the expiration of sixty (60) days from the date hereof, I shall issue a new land title deed provided that no ISSUE OF A PROVISIONAL CEW IFICATE objection has been rectivtd within that period. WIIEZEAS Sharifa Sheik fl M' ohamed P O B x 80917 . of . g , Dated the 30th May. 2003. Mombasa in the Republic of kenya, is registered as proptletor in fee B. K. KAMWARO, simple of 'that piece qf land containing 0.0341 hectare or thertabouts, Land Regi&lmr. étuate within Mombasa Municipality, Mombasa District, registered Nyqndarqa/samburu Districts. tmder title No. C.R. 21637/1, and whereas suftkient evideqce has bee: adduced to show tIIM the said celitkate of title issued thereof has been ff lost, notice is given that after the-exqiration of ninety (90) days from ' ihe date hereot l shall iqsue a provislonal certiticate of title provided that no objectioà has been received within that period. GAZE'ITE NOTICE NO. 3473 Dated the 30+ May, 2093. THE REGISTERED LAND ACT F. B. KIRIAGO, ' Registrar of Titles, Mombasa. (Cap. 300. section 35) . ISSUE OF NEW LAND TITLE DEEDS WHEREAS George Njuluna- Njug: (1D/689427 l ), of P.O. Box GAzE'rrE NcncE ko. 34% 57066, NairoN in the Republlc of Kenya, is registered as proyrietor in THB REGISTRATION OF TITLES ACT absolute ownership interest of those picces of' land contaimpg 0.64 (Cqp. 281) hectare or thereabouts.
Recommended publications
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus October 2019 International Standards in process ISO/CD Agricultural and forestry tractors — Roll-over 12003-2 protective structures on narrow-track wheeled An International Standard is the result of an agreement between tractors — Part 2: Rear-mounted ROPS the member bodies of ISO. A first important step towards an Interna- TC 28 Petroleum and related products, fuels tional Standard takes the form of a committee draft (CD) - this is cir- and lubricants from natural or synthetic culated for study within an ISO technical committee. When consensus sources has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 11009 Petroleum products and lubricants — Deter- Standard (DIS). The DIS requires approval by at least 75 % of the mination of water washout characteristics of member bodies casting a vote. A confirmation vote is subsequently lubricating greases carried out on a final draft International Standard (FDIS), the approval ISO/CD 13736 Determination of flash point — Abel closed-cup criteria remaining the same. method ISO/CD TR Petroleum products and other liquids — Guid- 29662 ance for flash point testing ISO/CD Lubricants, industrial oils and related prod- 12925-2 ucts (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) CD registered TC 29 Small tools ISO/CD 525 Bonded abrasive products — General requirements Period from 01 September to 01 October 2019 ISO/CD 5743 Pliers and nippers — General technical These documents are currently under consideration in the technical requirements committee.
    [Show full text]
  • News Iso Standards: 2013/12
    NEWS ISO STANDARDS: 2013/12 ISO/IEC 2382-4: 1999 150.80 € ISO/IEC 2382-4 Information technology -- Vocabulary -- Part 4: Buy Organization of data ISO/IEC 17000: 2004 200.20 € ISO/IEC 17000 Conformity assessment -- Vocabulary and general Buy principles ISO 3167: 2002 85.80 € ISO 3167 Plastics -- Multipurpose test specimens Buy ISO/IEC 23008-2: 2013 309.40 € ISO/IEC 23008-2 Information technology -- High efficiency coding and Buy media delivery in heterogeneous environments -- Part 2: High efficiency video coding ISO 3297: 2007 127.40 € ISO 3297 Information and documentation -- International standard Buy serial number (ISSN) ISO 9912-2: 2013 85.80 € ISO 9912-2 Agricultural irrigation equipment -- Filters for microirrigation Buy -- Part 2: Strainer-type filters and disc filters ISO 9912-3: 2013 75.40 € ISO 9912-3 Agricultural irrigation equipment -- Filters for microirrigation Buy -- Part 3: Automatic flushing strainer-type filters and disc filters ISO 10957: 2009 104.00 € ISO 10957 Information and documentation -- International standard Buy music number (ISMN) ISO 17992: 2013 119.60 € ISO 17992 Iron ores -- Determination of arsenic content -- Hydride Buy generation atomic absorption spectrometric method ISO 11783-14: 2013 223.60 € ISO 11783-14 Tractors and machinery for agriculture and forestry -- Buy Serial control and communications data network -- Part 14: Sequence control ISO 27729: 2012 111.80 € ISO 27729 Information and documentation -- International standard Buy name identifier (ISNI) ISO 27730: 2012 85.80 € ISO 27730 Information
    [Show full text]
  • Nummernverzeichnis Der Behandelten Normen
    Nummernverzeichnis der behandelten Normen DIN Seite DIN Seite DIN Seite DIN 6-1 83 DIN 244 250 DIN 669 497 DIN 6-2 83 DIN 254* 94 DIN 670 497 DIN 13 252 DIN 267-2 339,340 DIN 671 497 DIN 13-1* 253 DIN 267-6 340 DIN 705 188 DIN 13-2* 253 DIN 267-10 340 DIN 720 189 DIN 13-3* 253 DIN 267-13 340 DIN 747 169 DIN 13-4* 253 DIN 267-24 340 DIN 748 170 DIN 13-5* 253 DIN 316 370 DIN 748-3 853 DIN 13-6* 254 DIN 319 237 DIN 780-1 209 DIN 13-7* 255 DIN 322 205 DIN 780-2 209 DIN 13-8* 255 DIN 323-1 20 DIN 781 272 DIN 13-9* 255 DIN 323-2 20 DIN 803 273 DIN 13-10* 255 DIN 332 148 DIN 804 274 DIN 13-11* 255 DIN 336 266 DIN 820-1 14,17 DIN 34* 82 DIN 405-1* 266 DIN 820-2 18,19 DIN 39 236 DIN 406-10 89 DIN 820-4 17 DIN 66 357 DIN 406-11 89 DIN 820-12 1025 DIN 74-1* 358 DIN 406-12 89 DIN 824 82 DIN 76-1 143 DIN 432 394 DIN 835 367 DIN 78 145 DIN 442 241 DIN 876 208 DIN 79 164 DIN 443 241 DIN 908 372 DIN 82 148 DIN 444 371 DIN 909 372 DIN 93 393 DIN 461 136 DIN 910 372 DIN 95 377 DIN 463 394 DIN 913 368 DIN 96 377 DIN 470 241 DIN 914 368 DIN 97 377 DIN 471 395 DIN 915 368 DIN 98* 236 DIN 472 395 DIN 916 368 DIN 99* 238 DIN 475 164 DIN 935 387 DIN 102 336 DIN 475-1 164 DIN 935-1* 387 DIN 103-1 263 DIN 475-2 164 DIN 938-2* 367 DIN 103-2 263 DIN 476-1 78 DIN 950* 234 DIN 103-3 263 DIN 476-2 78 DIN 974-1 359 DIN 103-4 263 DIN 502 206 DIN 974-2 359 DIN 109-1 173 DIN 504 206 DIN 979 387 DIN 109-2 173 DIN 505 206 DIN 988 207 DIN 111 173 DIN 509 149 DIN 1013-1 489 DIN 115-1 176 DIN 513-1 265 DIN 1013-2 489 DIN 115-2 176 DIN 513-2 265 DIN 1014-1 489 DIN 116 174 DIN
    [Show full text]
  • Standards Available in Electronic Format (PDF) Page 1
    Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 1-2:2013 2 Standard for standards Part 2: Recognition of Standards Development Organizations (SDOs) in South Africa SATS 2:2012 1 The development of normative documents other than South African National Standards SANS 2:2013 7.01 Lead-acid starter batteries (SABS 2) SANS 4:2008 3.03 Locks, latches, and associated furniture for doors (SABS 4) (Domestic Type) SANS 11:2007 1.02 Unplasticized poly(vinyl chloride) (PVC-U) (SABS 11) components for external rainwater systems SANS 13:2008 2.03 Wax polish, solvent-based, for floors and furniture (SABS 13) SANS 14:1994/ISO 49:1994, IDT, Ed. 2 1 Malleable cast iron fittings threaded to ISO 7-1 (SABS ISO 49) SANS 15:2008 2.03 Wax emulsion polish for floors and furniture (SABS 15) SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3 2 Information technology - Security techniques - Modes of operation for an n-bit block cipher SANS 17:2014 1.01 Glass and plastics in furniture SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2 1 Information technology - Security techniques - Hash- functions Part 1: General SANS 18-2:2011/ISO/IEC 10118-2:2010, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 2: Hash-functions using an n-bit block cipher SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 3: Dedicated hash-functions SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed.
    [Show full text]
  • Software for Calculation of Screw Threads, Cutting Tools, Thread Gauges, Tolerances and Fits for Linear Sizes, Plain Gauges and Calibration Management
    web: www.qsyst.com email: [email protected] Threads, Tools, Gauges and Calibration Management Software for Calculation of Screw Threads, Cutting Tools, Thread Gauges, Tolerances and Fits for Linear Sizes, Plain Gauges and Calibration Management Table of contents 1. Introduction ............................................................................................................................... 2 1.1. Types of threads, cutting tools, thread and plain gauges ................................................................... 4 1.2. Software description ...................................................................................................................... 8 1.3. Software application for calculating threads and thread gauges ......................................................... 9 1.4. Software application for calculating plain gauges for linear sizes ....................................................... 10 1.5. Printout of the calculated thread workpiece, threading tools and gauges ........................................... 10 2. Full gauge specification for incoming and subsequent inspections purposes ......................... 11 3. Calibration management of thread and plain gauges .............................................................. 14 3.1. Calibration procedures, catalogues and additional settings................................................................ 14 3.2 Calibration of thread and plain gauges ............................................................................................
    [Show full text]
  • Catalogue of International Standards Used in the Petroleum and Natural Gas Industries
    Catalogue of international standards used in the petroleum and natural gas industries Report No. 362 February 2012 update P ublications Global experience The International Association of Oil & Gas Producers has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. We collate and distil this valuable knowledge for the industry to use as guidelines for good practice by individual members. Consistent high quality database and guidelines Our overall aim is to ensure a consistent approach to training, management and best prac- tice throughout the world. The oil & gas exploration & production industry recognises the need to develop consist- ent databases and records in certain fields. The OGP’s members are encouraged to use the guidelines as a starting point for their operations or to supplement their own policies and regulations which may apply locally. Internationally recognised source of industry information Many of our guidelines have been recognised and used by international authorities and safety and environmental bodies. Requests come from governments and non-government organisations around the world as well as from non-member companies. Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publica- tion, neither the OGP nor any of its members past present or future warrants its accuracy or will, regard- less of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer.
    [Show full text]
  • CEN-CENELEC Internal Regulations
    Internal Regulations Part 3 Principles and rules for the structure and drafting of CEN and CENELEC documents (ISO/IEC Directives — Part 2:2018, modified) June 2019 European Committee for Standardization Tel: +32 2 550 08 11 Fax: +32 2 550 08 19 European Committee for Electrotechnical Standardization Tel: +32 2 519 68 71 Fax: +32 2 550 08 19 Rue de la Science 23, 1040 Brussels – Belgium www.cen.eu www.cenelec.eu www.cencenelec.eu CEN/CENELEC Internal Regulations Part 3:2019 (E) CONTENTS INTRODUCTORY CLAUSES TO THE ISO/IEC DIRECTIVES, PART 2 ................................... 5 European foreword ............................................................................................................... 6 Introduction ........................................................................................................................... 8 1 Scope .............................................................................................................................. 9 2 Normative references ...................................................................................................... 9 3 Terms and definitions .................................................................................................... 11 GENERAL PRINCIPLES ....................................................................................................... 16 4 Objective of standardization .......................................................................................... 17 5 Principles .....................................................................................................................
    [Show full text]
  • Türk Yapisal Çelik Derneği Yapi Çeliği Işleri Teknik Şartnamesi
    TÜRK YAPISAL ÇELİK DERNEĞİ YAPI ÇELİĞİ İŞLERİ TEKNİK ŞARTNAMESİ TEKNİK YAYINLAR SERİSİ - 3 İstanbul - 24.04.2007 ISBN 978-975-92461-1-2 YAPI ÇELİĞİ İŞLERİ TEKNİK ŞARTNAMESİ İÇİNDEKİLER 1. KAPSAM 1 2. TANIMLAR 1 3. TASARIM 1 3.1. Yeterlik 1 3.2. Proje Geçerliliği 1 4. ESASLAR VE BELGELENDİRME 1 4.1. Uygulama Esasları 1 4.1.1. Genel 1 4.1.2. Uygulama ve Tolerans Sınıfları 2 4.1.3. Yapıların Önem Dereceleri 4 4.1.4. Üretim ve Hizmet Kategorileri 4 4.1.5. Uygulama Sınıflarının Belirlenmesi 5 4.2. İnşaat Yapımcısının Yeterliliğinin Belgelendirilmesi 5 5. MALZEME 6 5.1. Genel 6 5.2. Tanımlama, Test Sertifikaları ve İzlenebilirlik 7 5.3. Çelikler 7 5.4. Çelik Dökümler 8 5.5. Kaynak Sarf Malzemeleri 8 5.6. Mekanik birleşim elemanları 8 5.7. Boya 9 5.8. Diğer Hususlar 9 6. İMALAT 9 6.1. Genel 9 6.2. Tanımlama ve Markalama 10 6.3. Taşıma, istifleme ve depolama 10 6.4. Kesme 11 6.4.1. Genel 11 6.4.2. Makasla (Giyotinle) Kesme 11 6.4.3. Alevle kesme 11 6.5. Şekil verme 12 6.6. Delme 12 6.6.1. Delik ölçüleri 12 6.6.2. Delik çaplarında toleranslar 13 6.6.3. Uygulama 13 6.7. Köşe Çıkarma 14 6.8. Mesnet Yüzeyleri 14 6.9. Parçaların Birleştirilmesi (İmalat Montajı) 14 6.10. Parçaların Birleşim (Montaj) Kontrolü 15 6.11. Kolonların ve Basınç Elemanlarının İmali 15 6.12. Uzay Kafes Sistemleri 15 6.12.1. Çubuk Elemanlar (Boru ve Konikler) 15 6.12.2.
    [Show full text]
  • Isoupdate May 2021
    ISO Update Supplement to ISOfocus May 2021 International Standards in process ISO/CD 4484-3 Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of An International Standard is the result of an agreement between collected material mass released from textile the member bodies of ISO. A first important step towards an Interna- end products by domestic washing method tional Standard takes the form of a committee draft (CD) - this is cir- ISO/CD 18264 Textile slings — Lifting slings for general pur- culated for study within an ISO technical committee. When consensus pose lifting operations made from fibre ropes has been reached within the technical committee, the document is — High modulus polyethylene (HMPE) sent to the Central Secretariat for processing as a draft International TC 42 Photography Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently ISO/CD Imaging materials — Methods for measuring carried out on a final draft International Standard (FDIS), the approval 18937-1 indoor light stability of photographic prints — criteria remaining the same. Part 1: General guidance ISO/CD Imaging materials — — Methods for measuring 18937-2 indoor light stability of photographic prints — Part 2: Xenon‐arc lamp exposure ISO/DTS Imaging materials —Photographic prints — 18950.3 Effect of light sources on degradation under museum conditions TC 45 Rubber and rubber products CD registered ISO/CD 34-2 Rubber, vulcanized or thermoplastic — Deter- mination of tear strength — Part 2: Small (Delft) test pieces Period from 01 April to 01 May 2021 ISO/CD 4633 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specifica- These documents are currently under consideration in the technical tion for materials committee.
    [Show full text]
  • STP-NU-051 CODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components STP-NU-051
    STP-NU-051 CODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components STP-NU-051 CODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components Prepared for: Multinational Design Evaluation Programme Codes and Standards Working Group Date of Issuance: January 27, 2012 This report is the result of a multi-national effort by Standards Development Organizations (SDOs) from the United States of America, France, Japan, Korea and Canada. Neither ASME, ASME ST-LLC, the contributors, nor others involved in the preparation or review of this report, nor any of their respective employees, members or persons acting on their behalf, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process or service by trade name, trademark, manufacturer or otherwise does not necessarily constitute or imply its endorsement, recommendation or favoring by ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. The views and opinions of the authors, contributors, and reviewers of the report expressed herein do not necessarily reflect those of ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. ASME ST-LLC does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a publication against liability for infringement of any applicable Letters Patent, nor assumes any such liability.
    [Show full text]
  • Announcer July
    Vol. XLII JULY – DECEMBER 2016 NO. 2 ISSN 0856 - 0374 20 29 34 inside stories Members of the Zanzibar House of Representatives Committee for Finance, Business and Agriculture in a group photo with the TBS Management during their familiarization visit at TBS headquarters VISION A model of excellence in standardization and quality assurance services by 2025. To promote standardization and quality assurance in industry and commerce MISSION through standards development, quality assurance, metrology and testing services for sustainable socio-economic development. Tanzania Bureau of Standards (TBS) endeavours, as mandated, to QUALITY deliver quality products that include standards and quality assurance POLICY services by meeting and even exceeding customers’ requirements so as to retain their loyalty. TBS provides resources and continually improves her processes to ensure that employees are capable of consistently producing quality products at the right time. CORE VALUES i. Customer focus We deliver services to meet consumers’ expectations. ii. Quality culture We employ the best available practices and professional values in performing our duties. iii. Transparency We exercise openness, impartiality, accurately and promptly share information with all stakeholders. iv. Integrity We constantly demonstrate impartiality, fairness and honesty while upholding the highest ethical standards. v. Team work We work together through concerted efforts to achieve our corporate goals. CONTENTS EDITORIAL 4 TBS role in industrialization is beyond descriptions NEWS IN BRIEF 6 EAC countries strive to phase out lead in paints 7 TBS grants 96 licences, certificates to manufacturers 7 TBS urged to strengthen public education in rural A model of excellence in standardization and quality assurance services VISION areas by 2025.
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus April 2021 International Standards in process ISO/DTS Lubricants, industrial oils and related products 6521-2 (Class L) — Family D (Compressors) — Part An International Standard is the result of an agreement between 2: Specifications of categories DAG, DAH the member bodies of ISO. A first important step towards an Interna- and DAJ (Lubricants for flooded rotary air tional Standard takes the form of a committee draft (CD) - this is cir- compressors) culated for study within an ISO technical committee. When consensus TC 30 Measurement of fluid flow in closed has been reached within the technical committee, the document is conduits sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the ISO/CD 24460 Measurement of fluid flow rate in closed con- member bodies casting a vote. A confirmation vote is subsequently duits — Radioactive Tracer Methods carried out on a final draft International Standard (FDIS), the approval TC 34 Food products criteria remaining the same. ISO/CD 7927-1 Fennel seed, whole or ground (powdered) — Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) — Specification ISO/CD 7927-2 Fennel seed, whole or ground (powdered) — Part 2: Sweet fennel (Foeniculum vulgare var. panmorium) — Specification TC 35 Paints and varnishes ISO/CD 8130-4 Coating powders — Part 4: Calculation of CD registered lower explosion limit ISO/CD Preparation of steel substrates before applica- 11127-7 tion of paints and related products — Test Period from 01 March to 01 April 2021 methods for non-metallic blast-cleaning abra- sives — Part 7: Determination of water-soluble These documents are currently under consideration in the technical chlorides committee.
    [Show full text]