Supported Bill MANAT 1, 5, 10, 20, 50 5Bills. L70+/L70F/P5 DIP SWITCHES SETTING : 1(Pulse/ICT104U/ICT104V/MDB)
Total Page:16
File Type:pdf, Size:1020Kb
L7L700-I+D/LR770F(P-AuZlNse5(/PICulTs/eM/ICDTB1)04U/ICT104V/MDB) L70+/L70F-AZN5 L70+/L70F/P5 DIP SWITCHES SETTING : 1(Pulse/ICT104U/ICT104V/MDB) DIP SWITCHES SETTING : 2(Pulse) Currency Assign Data FUNCTION SW1 SW2 SW3 SW4 Interface MDB Pulse ICT104U ICT104V Supported bill MANAT 1, 5, 10, 20, 50 5bills. Pulse Normal High ON Bill value Pulse Normal Low OFF BV1 MANAT 1 MANAT 1 MANAT 1 MANAT 1 FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 Pulse Mode ON OFF BV2 MANAT 5 MANAT 5 MANAT 5 MANAT 5 ICT104U Mode OFF ON 1 Pulse / MANAT 1 OFF OFF OFF MDB Mode ON ON BV3 MANAT 10 MANAT 10 MANAT 10 MANAT 10 2 Pulse / MANAT 1 OFF OFF ON ICT104V Mode OFF OFF BV4 MANAT 20 MANAT 20 MANAT 20 MANAT 20 3 Pulse / MANAT 1 OFF ON OFF ON Reserved OFF BV5 MANAT 50 MANAT 50 MANAT 50 MANAT 50 4 Pulse / MANAT 1 OFF ON ON 5 Pulse / MANAT 1 ON OFF OFF Manufacture setting 10 Pulse / MANAT 1 ON OFF ON DIP SWITCHES SETTING : 2(ICT104U) DIP SWITCHES SETTING : 2(ICT104V) 20 Pulse / MANAT 1 ON ON OFF FUNCTION SW1 SW2 SW3 SW4 FUNCTION SW1 SW2 SW3 SW4 100 Pulse / MANAT 1 ON ON ON Reserved ON Reserved ON Lo= 50ms ON Reserved OFF Reserved OFF Fast output Pulse Hi=100ms Lo= 50ms Pulse Mode ON OFF Pulse Mode ON OFF Slow output Pulse OFF Hi=300ms ICT104U Mode OFF ON ICT104U Mode OFF ON Inhibit level Active Low ON MDB Mode ON ON MDB Mode ON ON Inhibit level Active High OFF ICT104V Mode OFF OFF ICT104V Mode OFF OFF ON ON Accept MANAT 1 ON Reserved Reserved OFF OFF Reject MANAT 1 OFF Manufacture setting Manufacture setting Accept MANAT 5 ON Reject MANAT 5 OFF DIP SWITCHES SETTING : 2(MDB) Accept MANAT 10 ON FUNCTION SW1 SW2 SW3 SW4 Reject MANAT 10 OFF Scaling Factor (SF) = 100 ON Decimal Point Position (DPP) = 2 Accept MANAT 20 ON Scaling Factor (SF) = 1 OFF Decimal Point Position (DPP) = 0 Reject MANAT 20 OFF Pulse Mode ON OFF Accept MANAT 50 ON ICT104U Mode OFF ON MDB Mode ON ON Reject MANAT 50 OFF ICT104V Mode OFF OFF Manufacture setting ON Reserved Note: (1) Please reset the bill acceptor after set the dip switch. OFF (2) Dip switches 1 to 5 are only used for pulse protocol. Manufacture setting 2015 International Currency Technologies Corporation V. 2.0 Part Number : SWM8AZ52000-R.