Intelligent Toilet Instructions
Total Page:16
File Type:pdf, Size:1020Kb
Intelligent toilet instructions The Product Model: Contents Overall sketch 1 Safety precautions 2 Function introduction 4 Thanks for choosing our product. And please read the instructions Installation guide Carefully before properly using. Toilet bowl installation 5 Remote control bracket installation 8 Operations Operation introduction 9 Preparations before use 9 Product use manual 10 Troubleshooting 16 Cleaning and Maintenance 17 Appendix Product pscification 21 Packing list 22 Overall sketch Safety Precautions All the safety precautions listed can prevent the users from the physical hurts or property losses. Cushion Please read all the safety items and warnings, using the product in the right way. Toilet seat lid Power plug WARNING Ignoring the sign may lead to serious injury or death. Damper Don’t disassemble, repair, Don’t immerse the product into LED indicator panel alter the product. the water. If the operating Environment has a quite high humidity, please install scavenging port and seal the attaching Control panel All the behaviors above may plug with rubber. lead to fire or electric shock. Warm air dryer duct Instant heat seat The product needs to be repaired professionals. Rear wash nozzle Bowl Don’t touch the plug with the Connect the grounding wire Front wash nozzle wet hand. with the product to prevent electric leakage or electric shock. It may lead to If the grounding wire is not connected with the electric shock. product, it may lead to electric leakage or shock. The grounding wire needs to be connected with the product by a professional. Don’t power on before pouring Don’t use the loosening plug. water. The power supply should The electric wire should not 2.4G wireless remote control not be higher than 110 V. be scratched, damaged, processing, bending, stretching 110 V bundling, hang heavy things or clamp. It may cause fire. Attention: It may cause electric The specification, design and color of the instruction may differ from the end-product shock or fire. you bought. In the case, you’d better refer to the end-product about the assemblies. 1 2 Function introduction: WARNING Ignoring the sign may lead to serious injury or death. Functions Introduction Don’t stand on the toilet seat cover, Don’t open up and close down Rear wash Provide rear cleansing seat circle or any other the toilet seat or toilet cover accessories. roughly. Rear oscillating wash Move the nozzle back and forth for rear cleansing Front wash Provide cleansing by feminine wash nozzle with a gentle spray It may cause break It may crack the toilet down the product. seat circle or toilet cover Front oscillating wash Move the nozzle back and forth with a gentle spray and lead to electric leakage. Adjusting water position Adjust the desired washing positions Changing the temperature Set the temperature of seats and water Don’t drag or bend the water pipe. Don’t install or leave the remote Changing the water pressure Change cleaning water pressure based on needs control near the water. Seat sensor Detect the presence of a user and get the cleansing functions ready to operate Heating seat Heating the toilet seat to keep warm and comfortable during cold winter months It may make water It may break down the remote control. leakage or no water Drying Dry the users after cleansing supply. Changing drying intensity Control the temperature of warm air from the dryer Adjusting the air outlet Set the position of air outlet based on needs position of dryer Remote control flushing Remote control bowl unit cleaning based on needs Preventing damage from freeze. Attention to the low temperature scalding. Auto flushing Auto bowl unit cleaning after users walk away After using a long period, please turn Removing odors off the heat preservation button near Deodorizer The inlet tube and the inner of the the seat circle. product may be damaged for freezing, Open and close deodorizer Please turn off the button for these Deodorizer switch and then lead to water leakage. groups: children, elders, patients, people unable to adjust the temperature, Power switch Turn power on and off people with weak skin, people taking sleeping pills, alcoholics, the tired. Energy-saving Saves electricity Soft night light Preparations for insufficient light Don’t put heat instruments beside The substance cover, seat circle the substance. and seat cover are all plastics Washing nozzles Provide nozzle cleansing products. Don’t bring fire source It may change the color of the substance like cigarette butt, ashtray near Anti-collision with silence Install damper inside to close gently or even break down the substance. these assemblies. Please avoid the direct sunshine. Smart remote control Allow the user to operate the toilet from a comfortable position Sometimes it may change the color It may lead to fire. of the plastics. Don’t cover the warm air outlet. Time setting Time setting It may cause fire injury. Keylock Lock remote control panel in case of improper operation Declaration: In the event that accident occurs as a result of improper usage, company will assume no responsibility. 3 4 Installation Guide Toilet bowl installation Connecting inlet water Installation environment 1. Before installation, pls connect the angle valve with the pipe Please check that walls and floors in 2.Open the angle valve to let the dirty water come out until the toilet room are finished construction and there is enough space pre-arranged the clean water come. for sewage, electric wires and water lines. Also please confirm the distance from the 3. Connect the inlet water pipe with angle valve closet flange centerline to the fished wall fits for the rough in. And the water supply 4. Open the angle valve to check if all connector without leaking. pressure should be within a range of 0.1MPa (dynamic)-0.75Mpa (static). While the water supply temperature should be within a range of 5℃-35℃. Notice: Please confirm the water inflow is greater Wall Drain Outlet than 18l/min, otherwise it may not be performed. Rough in Position the toilet Connect the water pipe Toilet inlet pipe connector Inlet stainless steel hose Angle valve Gasket 5 6 Install the Remote Control Holder Position the toilet Please see below picture 1.Check if the blow off pipe is ok and the ground is clean before you install 2.Put the Gasket on the blow off pipe hole.. 3.Put the toilet on the ground and connect the blow off pipe, adjust the position, make sure the seal ring is workable. 4.Smearing silica gel on the bottom of toilet bowl.(See the picture below) 5.Clean the ground, pls do not use the toilet after smearing silica gel The bracket of remote control (Silica gel solidify need around 24hrs), keep the toilet bowl away from water more than 24 hrs. Wall Paste the tape on the backside Outside of Inside of of remote control toilet bowl toilet bowl Stick remote control and wall by double side tape Silica gel Notice:clean the installation position before pasting and Installation and Operation Precautions Press the tape down fully and evenly when positioning. 1.Do not get toilet with cement or mortar inside as this may cause While after pasting,do not touch the holder within 15 minutes. cracking due to the condensation and expansion when installation. 2.Do not flush things that get toilet clogged easily, such as newspaper, diapers, and sanitary napkins. 3.Do not use the toilet under 0℃ otherwise it may result in ceramic shell cracking because of the expansion when water congeals into ice. 4.Do not strike the ceramic shell in case of damage or water leakage. 5.Clean the ceramic surface by nylon brush and soap-suds or neutral cleaning agent. Do not use steel brush and strongly corrosive liquids as it may damage the surface and corrode pipes. Declaration: Damages due to improper installation or operation, company will assume no responsibility. 7 8 Operations Operation introduction Product use manual This product is controlled mainly by remote control, while by control panel subsidiary Please note below picture is only for illustration that how LED displays in full screen, 1.Sitting on the toilet seat not the actual interface. seated-sensor activated If air purification is activated,deodorizing function operates automatically. 2.Rear wash 5.The stop button Rear cleansing (Icon as Stop rear wash,front below displays in the screen) LED Display wash,or it will stop wash (Model 818ZA/725ZA only) after 2 minutes. (the panel shows) 3.Front wash Feminine cleansing (Icon as below displays in the screen) Power Dryer Front wash Rear wash Power Flush Control Panel Remote Control 4.Water pressure adjusting button Preparations before Use 4-position water pressure can be adjusted, use + and – button to adjust. 2.Open the water-inlet valve 1.Ensure the plug is inserted into socket and the indicator light is on. 6.Wash nozzle position adjustable button 5-grade for adjusting the satisfied position to wash by pressing 3.Confirm the control panel power 4.Press the Power Button on the panel or ( shows on the up-right panel). indicator is on turnon the power by remote control;also confirmpower LED on the toilet is on otherwise it cannot be operated. 9 10 7. Dryer Function 10.Stop 12.Water temperature control 13.Seat temperature control Warm air is blown to dry the area Stop warm air dryer, or it will washed by the shower. automatically stop after 4 mins. Press to set water temperature. The Press to set seat temperature.The (Shows on remote control) temperature shows as a concrete numerical temperature shows as a concrete numerical value, When temperature value is between value, When temperature value is between 30-39,water will be heated according to 30-39,seat will be heated according to your your setting.