ECS2100 Series CLI Reference Guide
Total Page:16
File Type:pdf, Size:1020Kb
ECS2100-10T/PE/P ECS2100-28T/P/PP 10/28-Port Web-smart Pro Gigabit Ethernet Switch CLI Reference Guide Software Release v1.2.2.15 www.edge-core.com CLI Reference Guide ECS2100-10T Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 8 10/100/1000BASE-T (RJ-45) Ports and 2 Gigabit SFP Ports ECS2100-10PE Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 8 10/100/1000BASE-T (RJ-45) 802.3 af/at PoE Ports with 2 Gigabit SFP Ports (PoE Power Budget: 65W) ECS2100-10P Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 8 10/100/1000BASE-T (RJ-45) 802.3 af/at PoE Ports and 2 Gigabit SFP Ports (PoE Power Budget: 125 W) ECS2100-28T Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 24 10/100/1000BASE-T (RJ-45) Ports and 4 Gigabit SFP Ports ECS2100-28P Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 24 10/100/1000BASE-T (RJ-45) 802.3 af/at PoE Ports and 4 Gigabit SFP Ports (PoE Power Budget: 200 W) ECS2100-28PP Gigabit Ethernet Switch Web-smart Pro Gigabit Ethernet Switch with 24 10/100/1000BASE-T (RJ-45) 802.3 af/at PoE Ports and 4 Gigabit SFP Ports (PoE Power Budget: 370 W, can extend to 740 W) E012019-CS-R05 How to Use This Guide This guide includes detailed information on the switch software, including how to operate and use the management functions of the switch. To deploy this switch effectively and ensure trouble-free operation, you should first read the relevant sections in this guide so that you are familiar with all of its software features. Who Should Read This This guide is for network administrators who are responsible for operating and Guide? maintaining network equipment. The guide assumes a basic working knowledge of LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network Management Protocol (SNMP). How This Guide is This guide describes the switch’s command line interface (CLI). For more detailed Organized information on the switch’s key features or information about the web browser management interface refer to the Web Management Guide. The guide includes these sections: ◆ Section I “Getting Started” — Includes information on initial configuration. ◆ Section II “Command Line Interface” — Includes all management options available through the CLI. ◆ Section III “Appendices” — Includes information on troubleshooting switch management access. Related This guide focuses on switch software configuration through the CLI. Documentation For information on how to manage the switch through the Web management interface, see the following guide: Web Management Guide For information on how to install the switch, see the following guide: Quick Start Guide For all safety information and regulatory statements, see the following documents: Safety and Regulatory Information – 3 – How to Use This Guide Conventions The following conventions are used throughout this guide to show information: Note: Emphasizes important information or calls your attention to related features or instructions. Caution: Alerts you to a potential hazard that could cause loss of data, or damage the system or equipment. Documentation This documentation is provided for general information purposes only. If any Notice product feature details in this documentation conflict with the product datasheet, refer to the datasheet for the latest information. Revision History This section summarizes the changes in each revision of this guide. Revision Date Change Description v1.2.2.15 01/2019 Removed mention of GVRP support v1.2.2.15 07/2018 Added • "lacp mode" on page 387 • "power download" on page 401 • "switchport forbidden vlan" on page 471 • "ip igmp snooping mrouter-forward-mode dynamic" on page 522 • "lldp med-fast-start-count" on page 584 • "lldp med-location civic-addr" on page 594 • "lldp med-location civic-addr" on page 594 • "lldp med-notification" on page 596 • "lldp med-tlv inventory" on page 597 • "lldp med-tlv location" on page 597 • "lldp med-tlv med-cap" on page 598 • "lldp med-tlv network-policy" on page 598 • "ip dhcp l2 relay" on page 624 • "ip dhcp l3 relay" on page 625 • "ip dhcp relay information option" on page 627 • "ip dhcp relay information option encode no- subtype" on page 629 • "ip dhcp relay information policy" on page 630 • "ipv6 dhcp relay destination" on page 631 • "ipv6 dhcp relay destination multicast" on page 632 • "show ipv6 dhcp relay destination interface" on page 633 – 4 – How to Use This Guide Revision Date Change Description Updated: • "prompt" on page 81 • "show process cpu task" on page 94 • "show system" on page 97 • "show tech-support" on page 99 • "watchdog software" on page 101 • "delete" on page 109 • "Time" on page 138 • "snmp-server enable port-traps link-up-down" on page 169 • "radius-server encrypted-key" on page 211 • "tacacs-server encrypted-key" on page 215 • "ip dhcp snooping information option" on page 287 • "ip arp inspection limit" on page 313 • "ip arp inspection trust" on page 313 • "interface" on page 352 • "media-type" on page 356 • "show interfaces brief" on page 360 • "show interfaces history" on page 365 • "show lacp internal - display description" on page 392 • "show power mainpower" on page 405 • "Multicast Filtering Commands" on page 519"rate- limit" on page 418 • "switchport packet-rate" on page 420 • "clear mac-address-table dynamic" on page 431 • "spanning-tree bpdu-guard" on page 448 • "spanning-tree loopback-detection" on page 452 • "show voice vlan" on page 492 • "show queue mode" on page 499 • "show queue weight" on page 499 • "match" on page 510 • "show policy-map interface" on page 517 • "ip igmp snooping querier" on page 523 • "ip igmp snooping vlan proxy-address" on page 533 • "ip igmp snooping version" on page 528 • "ip igmp snooping version-exclusive" on page 529 • "show ip igmp snooping group" on page 539 • "show ipv6 mld snooping group" on page 563 • "ipv6 mld max-groups action" on page 575 • "lldp dot3-tlv poe" on page 593 • "ip mdns" on page 613 • "ip dhcp relay server" on page 623 – 5 – How to Use This Guide Revision Date Change Description Removed: • “clear collision-mac-address-table dynamic” • “show collision-macaddress-table” • “show ip default-gateway” • “show ipv6 mld snooping group source-list” v1.2.2.9 06/2018 Document EIT Corrections rev. 3 Added • "clear ip rip statistics" on page 692 Updated: • Multiple minor inaccuracies fixed per Internal audit. Removed: • Command “show license file” • Section “fan control” • Command Set: “Transceiver Power Threshold Trap” • Command “dot1x timeout auth‐period” • Command “dot1x timeout held‐period” • Command “show spanning‐tree tc‐prop” • Command “ip igmp snooping priority” v1.2.2.9 06/2018 Requested Document Corrections rev. 2 Added • "Power over Ethernet Commands" on page 395 • "dot1q-tunnel tpid" on page 476 • "show dot1q-tunnel" on page 479 • "set ip dscp" on page 515 Updated: • "show process cpu task" on page 94 • "rmon alarm" on page 188 • "delete public-key" on page 241 • "ip ssh save host-key" on page 243 • "ip access-group" on page 332 • "access-list ip" on page 328 • "access-list mac" on page 341 • "Link Aggregation Commands" on page 381 • "show mac-address-table" on page 432 • "queue mode" on page 496 • "queue weight" on page 497 – 6 – How to Use This Guide Revision Date Change Description • "qos map cos-queue" on page 500 • "qos map dscp-queue" on page 502 • "qos map trust-mode" on page 503 • "service-policy" on page 515 • "clear arp-cache" on page 646 • "show arp" on page 646 Removed: • Unsupported selective QinQ commands from "Configuring IEEE 802.1Q Tunneling" on page 475 •Glossary ‐ OSPF entry v1.2.2.9 08/2017 New: rev. 1 • "Routing Information Protocol (RIP)" on page 676 Removed: • ERPS commands v1.2.2.0 01/2017 New: • "Switch Clustering" on page 154 • "Flow Sampling Commands" on page 195 • "mac-authentication reauth-time" on page 269 • "network-access max-mac-count" on page 272 • "network-access mode mac-authentication" on page 273 • "network-access port-mac-filter" on page 274 • "mac-authentication intrusion-action" on page 275 • "mac-authentication max-mac-count" on page 275 • "Web Authentication" on page 278 • "ip dhcp snooping information option remote-id" on page 290 • "ip dhcp snooping information option circuit-id" on page 294 • "dos-protection echo-chargen" on page 316 • "dos-protection tcp-flooding" on page 317 • "dos-protection udp-flooding" on page 319 • "dos-protection win-nuke" on page 320 • "switchport dot1q-tunnel priority map" on page 478 • "Loopback Detection Commands" on page 423 • "qos map cos-queue" on page 500 • "qos map dscp-queue" on page 502 • "show qos map cos-queue" on page 504 • "show qos map dscp-queue" on page 505 • "IP Routing Commands" on page 673 • "show ip igmp snooping statistics" on page 540 • "File Management" on page 103 – SFTP • "Denial of Service Protection" on page 316 • "dir" on page 110 – 7 – How to Use This Guide Revision Date Change Description Updated: • "dir" on page 110 • "File Management" on page 103 – SFTP • "Denial of Service Protection" on page 316 • "switchport packet-rate" on page 420 Removed: • “vlan-trunking” • “qos map cos-dscp” •“qos map dscp-mutation” •"set phb" •“set ip dhcp” • “show qos map cos-dscp” • “show qos map dscp-mutation” v1.1.2.0 1/2016 Initial release – 8 – Contents How to Use This Guide 3 Contents 9 Tables 35 Section I Getting Started 41 1 Initial Switch Configuration 43 Connecting to the Switch 43 Configuration Options 43 Connecting to the Console Port 44 Logging in to the Command Line Interface 45 Setting Passwords 45 Remote Connections 46 Configuring