robocopy gui download windows 10 Add a Graphical User Interface (GUI) To the Microsoft Robocopy. Robocopy or Robust File Copy is a directory replication command-line tool from Microsoft. It was first released a part of the Windows NT 4.0 Resource Kit and it is available as a part of Windows Vista and Windows 7 as a standard feature. For Windows XP users you need to download the Windows Resource Kit in order to use Robocopy. Robocopy can be used to mirror directories, as well as for any batch or synchronous copy needs. The best feature of Robocopy is that when you mirror directories it can copy NTFS attributes and other file properties as well. It provides features such as multithreading, mirroring, synchronization mode, automatic retry, and the ability to resume the copying process. Robocopy is replacing Xcopy in the newer versions of Windows although you can find both the tools in Windows 10. If you are comfortable using the command line then you can directly run Robocopy commands from the command line using the command syntax and options. But if you’re not comfortable using the command line then don’t worry as you can add a graphical user interface (GUI) to go along with the tool. So let’s see how you can add Graphical User Interface to the Microsoft Robocopy using the below-listed tutorial. Add a Graphical User Interface (GUI) To the Microsoft Robocopy. These are the two tools using which you can add a Graphical User Interface (GUI) to the Microsoft Robocopy command-line tool: RoboMirror RichCopy. Let us discuss how these tools can be used to add Graphical User Interface (GUI) to the Microsoft Robocopy command-line tool one by one. RoboMirror. RoboMirror provides a very simple, clean, and user-centered GUI for Robocopy. RoboMirror allows for easy synchronization of two directory trees, you can perform a robust incremental backup, and it also supports volume shadow copies. In order to add Graphical User Interface (GUI) to the Robocopy command-line tool using RoboMirror, first of all, you need to download RoboMirror. To download RoboMirrror, visit the official website of RoboMirror. After downloading is completed follow the below steps to install RoboMirror: 1.Open the downloaded setup of RoboMirror . 2.Click on the Yes button when asked for confirmation. 3.RoboMirror setup wizard will open, just click on the Next button. 4. Select the folder where you want to install the setup of RoboMirror . It is suggested to install the setup in the default folder. 5.Click on the Next button. 6.Below screen will open up. Again click on the Next button. 7.If you want to create a desktop shortcut for the RoboMirror then checkmark “ Create a desktop icon “. If you do not want to do so then simply uncheck it and click on the Next button. 8.Click on the Install button. 9.When the installation is completed, click on the Finish button and the RoboMirror setup will be installed. To use RoboMirror to add Graphical User Interface to Robocopy command-line tool follow the below steps: 1.Open RoboMirror then click on the Add task option available at the right side of the window. 2. Browse for the Source folder and the Target folder by clicking on the Browse button. 3.Now under “ Copy extended NTFS attributes ” you choose to copy the extended NTFS attributes. 4.You can also choose to delete the extra files and folders in the target folder that are not present in the source folder, just checkmark “Delete extra files and folders” . This gives you an exact copy of the source folder that you are copying. 5.Next, you also have an option to create a volume shadow copy of the source volume during the backup. 6.If you want to exclude the files and folders from backing up then click on the “ Excluded items ” button and then select the files or folders which you wish to exclude. 7.Review all your changes then click OK. 8.On the next screen, you can either perform the backup directly or schedule it to be run at a later time by clicking on the Schedule button. 9. Checkmark the box next to “ Perform automatic backups “. 10.Now from the drop-down menu, choose when you want to schedule backup i.e. Daily, Weekly, or Monthly. 11.Once you have selected then click on the OK button to continue. 12.Finally, click on the Backup button to start the backup if not scheduled for later. 13.Before the backup process begins, the pending changes are displayed so that you can cancel the backup and change the settings for the tasks you need to. 14.You also have the option to view the history of the backup tasks you have performed by clicking on the History button . RichCopy. RichCopy is a discontinued file copy utility program developed by Microsoft Engineer. RichCopy also has a nice & clean GUI but it is more powerful and faster than some other file copying tool available for the Windows operating system. RichCopy can copy several files simultaneously (multi-threaded), it can be invoked either as a command-line utility or via a graphical user interface (GUI). You can also have different backup settings for different backup tasks. Download RichCopy from here. After downloading is completed follow the below steps to install RichCopy: 1.Open the downloaded setup of RichCopy. 2.Click on Yes button when asked for confirmation. 3.Select the folder where you want to unzip the files . It is suggested not to change the default location. 4.After selecting the location. Click on the OK button. 5.Wait for a few seconds and all the files will be unzipped to the selected folder. 6.Open the folder which contains the unzipped files and double click on RichCopySetup.msi. 7.RichCopy setup wizard will open, click on the Next button. 8.Again click on the Next button to continue. 9.On the license agreement dialog box, click on the radio button next to the “ I Agree ” option and then click on the Next button. 10.Select the folder where you want to install the RichCopy. It is suggested not to change the default location. 11.Click on the Next button to proceed. 12. Microsoft RichCopy installation will start. 13.Click on yes button when asked for confirmation. 14.When the installation is completed, click on the Close button. To use RichCopy follow the below steps: 1.Click on the Source button to select multiple files that is available on the right side. 2.Select one or multiple options such as files, folders, or drives that you wish to back up. 3.Select the destination folder by clicking on the Destination button available right below the source option. 4.After selecting the source folder and destination folder, click on the Options button and the below dialog box will open. 5.There are several options that are available which you can set for each backup profile separately or for all the backup profiles. 6.You can also set a timer to schedule backup tasks by checking the checkbox next to Timer. 7.After setting the options for backup. Click on the OK button to save changes. 8.You can also start the Backup manually by clicking on Start button available in the top menu. Recommended: Both RoboCopy and RichCopy are free tools that are good for copying or backing up files in Windows faster than simply using the normal copy command. You can use any of them to add Graphical User Interface (GUI) to Microsoft RoboCopy command-line tool . If you still have any questions regarding this guide then feel free to ask them in the comment section. Aditya Farrad. Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years. He covers Internet services, mobile, Windows, software, and How-to guides. 1 thought on “Add a Graphical User Interface (GUI) To the Microsoft Robocopy” Sounds good and helpful if it really solves the Robocopy problems , I use a GUI alternative to Robocopy called Gs Richcopy 360, it is easy ,Robust and handle all the issues that Robocopy can’t handle like the long pathname, copying the open files, copying the NTFS/Share permissions…. etc . Quick Start Guide to Robocopy in Windows 10. This tutorial introduces Robocopy in Windows 10 briefly and illustrates how to transfer files over network via Robocopy in Windows 10. Also, you’re given a freeware to transfer files more easily. By AOMEI / Last update March 22, 2021. Overview of Robocopy in Windows 10. You may get tired of manually copying the same directories every single time, or transferring files via a transit device like external hard drive. These old-fashioned methods are not only time-consuming, but can also cause problems, e.g. files corruption, data loss. Therefore, it's better to transfer files with the file copy program - Robocopy . Robocopy (also known as Robust File Copy) is a Windows command-line file replication utility. It functionally replaces Xcopy with more practical options. With more than 80 switches, it owns three main abilities: Copy/transfer files between computers over a network. Copy or mirror directories anywhere the computer has access. Copy drives to another location. Before Windows Vista, Robocopy acted as an individual utility. It now sits on a high pedestal in the system32 directory on every Windows installation. Robocopy supports multi-threaded mode, that is, you can copy multiple files at the same time with multi-threaded enabled. Above all, while copying files correctly, it also preserves their original attributes and timestamps. How to use Robocopy in Windows 10? As an extremely versatile program, Rococopy is often used to transfer files over a network. So here’s a quick guide on how to perform this task. The task is a two-step process. Users should first enable file sharing on the source computer. Then use the Robocopy in the destination device to transfer files over the network. The specific steps are as follows. Stage 1: Configure file sharing on the source computer. Step 1. Open File Explorer to find the folder you want to share. Step 2. Right click the folder and then choose Properties . Step 3. Click Sharing and Share subsequently. Step 4. Select the Everyone group from the drop-down menu. Then click Add . Step 5. Select the type of sharing permissions you want the folder to have. Then click Share to continue. * Read : users can view and open the sharing files. * Read/Write : users are allowed to view, open, modify and delete the sharing files. Step 6. Note the network path of the folder that other users will need to access the sharing files over the network. Then click Done . Step 7. Wait for the sharing progress to be completed. Then click Close . Tips : Please remember the IP address of your source computer. If you don’t know your IP address, you can go Settings > Network & Internet > Wi-Fi or Ethernet to view the information. It is reported that file sharing often goes wrong. Refer to Windows 10 file sharing not working – how to resolve, if you have any questions. Stage 2: Use Robocopy in the destination device to copy files. Once file sharing is successfully configured on the source computer, you can copy sharing files using Robocopy in the destination device. Let’s take a closer look at the necessary steps to use Robocopy in Windows. Step 1. Press Windows logo key + X at the same time. Then select Command Prompt (Admin ) from the list. Step 2. Type the following command and then press Enter . robocopy \\source-device-ip\path to share folder C:\destination-device\path to store folder /S /E /Z /ZB /R:5 /W:5 /TBD /NP /V /MT:16. Here's an example: robocopy \\10.1.2.70\Users\xbox1\Downloads\ C:\Users\xbox1\Downloads\copy\ /S /E /Z /ZB /R:5 /W:5 /TBD /NP /V /MT:16. /S - Copy subdirectories (excludes empty directories). /E - Copy subdirectories (includes empty directories). /Z - Copy files in restartable mode. /ZB - Use restartable mode. Turn to backup mode, if access is denied. /R:5 - Retry 5 times (change the number by your needs, the default value is 1 million). /W:5 - Wait 5 seconds before retrying (you can specify a different number, default value is 30 seconds). /TBD - Wait for the share names to be defined by the system (retry error 67). /NP - Copying progress will not be displayed. /V - Produce verbose output, showing skipped files. /MT:16 - Create multi-threaded copies with 16 threads (you can replace 16 with an integer between 1 and 128, the default value is 8). Tips : The above steps also work with Robocopy in Windows 7. Open files are not supported by this program. You may not be able to endure these long and complex instructions. Care must be taken when using Robocopy command-line, as you have no chance to step back. Besides, some users find Robocopy not copying files during the operation. To transfers files easily and efficiently, you might require a Robocopy alternative. Best free alternative to Robocopy in Windows 10. You deserve the best free Robocopy alternative – AOMEI Backupper Standard. This freeware is designed with a user-friendly GUI, which makes it easier to operate than Robocopy. It includes the features of file backup and file sync, which can image or copy files to a network, NAS device, internal/external hard drive in a few simple steps. Open files can also be copied without effort. Except for copying multiple files simultaneously, tasks can also be schedule backup daily, weekly or monthly. Additionally, you can enable email notification to see if your operation is completed successfully. Other practical features like system backup, disk backup, partition backup, file backup and disk clone can help you manage data flexibly. So go download this freeware and get started! Verdict. This article gives a detailed introduction to Robocopy in Windows 10. Although this program can be used to transfer files over a network, it involves a complicated and time consuming process. So I recommend the best free Robocopy alternative – AOMEI Backupper Standard to you. It’s powerful and easy to use. By the way, after upgrading to advanced editions, you can enjoy more useful features, for instance, real-time sync. But if you’re a Windows Server user, AOMEI Backupper Server will meet your needs. Best Free PowerShell Robocopy Equivalent in Windows 7/8/10. How to get PowerShell RoboCopy equivalent in Windows 7/8/10? In this article, you will find the best free Robocopy alternative to protect your data easily. By Ailsa / Last update January 8, 2021. What is RoboCopy? Robocopy (Robust File Copy for Windows) is a command-line directory and file replication command for Microsoft Windows replaced Xcopy since Windows Vista and Windows Server 2008 and provides more options to copy files. Compared with copy and paste, you will get faster speed than a copy with Robocopy. The most important difference is that Robocopy will (usually) retry when an error occurs, while copy will not. In most cases, that makes Robocopy far more suitable for use in a script. Powershell Robocopy Syntax and Parameters. Here is the syntax of Robocopy, and you could input robocopy /? to see the syntax: robocopy [ [ . ]] [ ] specifies the path to the source directory. specifies the path to the destination directory. [ [ . ]] specifies the file or files to be copied. [ ] adds some copy options, such as: /s : Copies subdirectories. Note that this option excludes empty directories. /e : Copies subdirectories. Note that this option includes empty directories. /lev : Copies only the top N levels of the source directory tree. /z : Copies files in restartable mode. /b : Copies files in Backup mode. /zb : Uses restartable mode. If access is denied, this option uses Backup mode. /efsraw : Copies all encrypted files in EFS RAW mode. /copyall : Copies all file information. And many other options for you to copy files. How to Transfer Files with RoboCopy in Windows 10? For example, we transfer the two files: a-test.docx, and b-test.txt from E:\backuptest to F:\backuptest1, please input the command: robocopy E:\backuptest F:\backuptest1 a-test.docx b-test.txt. Besides, you could create an incremental copy with /xo (exclude older files), or /mir (Mirror a directory tree (equivalent to /E plus /PURGE ).) option. However, you may encounter Robocopy slows with the /z option, which means copy files in restartable mode. If you run robocopy /z to copy files and canceled with Ctrl + C on the halfway, restart the computer, then run the command again, and it'll copy super slowly. Why D o Y ou need PowerShell Robo c opy Alternative ? RoboCopy does speed up the file duplicate, it has some limitations that Impedes user operation and use. It is kind of complicated and troublesome. Robocopy does not copy open files. It is not useful for backing up live operating system volumes. Furthermore, although Robocopy itself is a command-line tool, Microsoft TechNet provides a GUI called Robocopy GUI, and other advanced tools, like RichCopy, PowerCopy, etc. However, these Robocopy alternatives in Windows operating system has some limitations: Robocopy GUI is not available now. RichCopy: only for Windows XP, Vista, 7 and Windows Server 2003. PowerCopy: only for Windows 7/8, Windows Server 2008(R2)/2012. Best Free PowerShell Robo c opy E quivalent - AOMEI Backupper. If you want to find an easier way to copy files, it is highly recommended to use the best free Powershell Robocopy equivalent - AOMEI Backupper Standard. How to copy files easily in Windows 7/8/10? This freeware provides you File Sync feature to copy files easily and quickly with a few clicks. Besides, this is available for Windows XP, Vista, 7, 8, 8.1, 10. Please download AOMEI Backupper Standard first, and try it with the following steps: 1. On the main window, click Sync -> Basic Sync in turn. 2. Click + Add Folder button to select files you need to sync. 3. Select another location to save the files from the source path. Or tap Select a network location or Select a cloud drive to choose NAS or cloud drives as the destination. 4. Click Start Backup >> button to copy files from the source location to the destination with PowerShell Robocopy Equivalent.
▶ Tips: ✿ Options: You could comment on the synchronization job, even enable email notification to get an email alert while finished the job. ✿ Schedule: You could run this synchronization job via daily, weekly, monthly, even USB plug-in, or event triggers. The last two options are premium features, please upgrade to AOMEI Backupper Professional or other premium editions. ✿ Real-time sync: This is a premium feature to sync files or folders as soon as possible they changed. Besides, AOMEI Backupper Standard is capable of cloning Windows 10 to SSD without reinstalling OS and make it bootable, clone entire hard disk to copy all the data on the source disk, etc. If you are IT technicians who prefer to copy files using command prompt in Windows 7/8/10, you could run AMBackup.exe as an administrator to achieve the goal. Moreover, you could create a backup task to protect your data in case something bad happens to your computer, and save storage space. Conclusion. As the best free Powershell Robocopy equivalent - AOMEI Backupper Standard, is easily and quickly to copy files from one drive to another. It’s faster than Robocopy, Robocopy GUI or other Robocopy alternative GUI tools. And provides more flexible features to backup, clone and restore data without efforts. For Server users, try AOMEI Backupper Server to get the job done. Is Robocopy GUI available in Windows 10? Robocopy or Robust File Copy is available in Windows 10, however, it is a function that can only be used through a command-line directory. As of today, the Microsoft Robocopy GUI is available in Microsoft Windows Servers, check this article for your reference. We believe that your idea of Microsoft Robocopy GUI being available in Windows 10 can lead to a better computing experience. And because of this, we encourage you to submit it as a feedback using our Feedback Hub. By doing so, there is a possibility that Robocopy GUI will be available in Windows 10, through product improvement or update. For more information on Feedback Hub, see our support article and YouTube video. In order to submit a new feedback, please follow these steps: On a Windows 10 device, search for “Feedback Hub” in Cortana search, and then launch the app. Navigate to Feedback in the left menu, then press + Add new feedback. Select the Problem, share any details you think are relevant, and then choose an appropriate category and subcategory. Important: If possible, reproduce the problem(s) after clicking Begin monitoring (or Start capture) near the end of the form; Stop monitoring when you’re done. Once you’ve completed the form and monitoring, click Submit. Click Continue using Feedback Hub. Click My feedback at the top, and then find the item you submitted (it may take a while to appear). Open the item you submitted, and then click Share. Click Copy link, and then paste the link here in your response (it will look like https://aka.ms/