DOCSLIB.ORG

I-010 Panel Layout & Wiring Diagram

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
I-010 Panel Layout & Wiring Diagram CITY OF ROCKLEDGE 201 EAST PINE STREET, SUITE 1000 ORLANDO, FL 32801-2763 SCADA, WIFI AND VIDEO SURVEILLANCE TEL: (407) 839-3955 FAX: (407) 839-3790 PHASE II IMPLEMENTATION www.tetratech.com PROJECT LOCATION: CLIENT INFORMATION: 1700 JACK OATES BLVD. CITY OF ROCKLEDGE ROCKLEDGE, FL 32955 3100 JACK OATES BLVD. ROCKLEDGE, FL 32955 Sheet List Table Sheet Number Sheet Title Tt PROJECT No.: CLIENT PROJECT No.: G-000 COVER 200-53784-18005 E-001 LEGEND E-002 OVERALL ELECTRICAL SITE PLAN E-003 OPS & RAS ELECTRICAL PLANS PROJECT DESCRIPTION / NOTES: E-004 HW & DW ELECTRICAL PLANS IMPLEMENT PHASE II OF THE ROCKLEDGE SCADA MASTER PLAN E-005 CHEM & GEN ELECTRICAL PLANS CONSISTING OF SCADA, WIFI & VIDEO SURVEILLANCE FOR THE WASTEWATER RECLAMATION FACILITY E-006 ELECTRICAL DETAILS E-007 ELECTRICAL DETAILS I-001 INSTRUMENTATION LEGEND I-002 PROPOSED PLANT NETWORK ARCHITECTURE ISSUED: I-003 PROPOSED WIFI NETWORK ARCHITECTURE BID SET I-004 WiFi COVERAGE PLAN I-005 PROPOSED VIDEO SURVEILLANCE ARCHITECTURE I-006 PROPOSED VIDEO SURVEILLANCE COVERAGE PLAN I-007 INSTRUMENTATION DETAILS I-008 INSTRUMENTATION DETAILS I-009 PANEL LAYOUT & WIRING DIAGRAM VICINITY MAP: N PROJECT LOCATION OCTOBER 2019 1 2 3 4 5 6 7 BACKGROUND PLAN AND ONE LINE SYMBOLS CONTROL CIRCUIT & PILOT DEVICE LEGEND SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION CONTROL SWITCH (SEL. OR P.B.) LOW VOLTAGE DISCONNECT SWITCH O SEE CIRCUITS FOR SPECIFIC TYPE PRESS. ACTUATED SWITCH H A www.tetratech.com SELECTOR SWITCH OPERATOR F F FL SEE CIRCUITS FOR SPECIFIC TYPE WITH FUNCTION SHOWN ORLANDO, FL 32801 FLOAT SWITCH - FLOW SWITCH LOW VOLTAGE FUSE (BELOW 600V) FLOAT ACTUATED SWITCH TEMPERATURE - HUMIDISTAT SWITCH T M 1 ALL STARTERS SHALL BE FULL (SUBSCRIPT = NO. OF STAGES) ENGINEERING BUSINESS NO. 2429 RV VOLTAGE NON-REVERSING UNLESS 2 OTHERWISE INDICATED FLOW ACTUATED SWITCH MOMENTARY PUSHBUTTON L P V LIMIT - PRESSURE - VACUUM SWITCH FVR (FVR) FULL VOLTAGE REVERSING OPERATOR-NORMALLY OPEN 3 (RV) REDUCED VOLTAGE ALT ELECTRICAL OR MECHANICAL ALTERNATOR 2S,2W (2S,2W) TWO SPEED, TWO WINDING 201 EAST PINE STREET, SUITE 1000 (SEE WIRING) TEMP. ACTUATED SWITCH MOMENTARY PUSHBUTTON OPERATOR-NORMALLY CLOSED OVERLOAD SWITCH OR DEVICE 600V, 3 POLE MOLDED CASE CIRCUIT OS BREAKER, FRAME & RATING AS SHOWN LIMIT SWITCH- PUSHBUTTON OPERATOR PHONE: (407) 839-3955 FAX: (407) 839-3790 NORMALLY OPEN A-3 SINGLE PHASE, FRACTIONAL HP MOTOR WITH MUSHROOM HEAD TB TERMINAL BOX 1/2 TO LOCATION INDICATED (SEE GEN. NOTE 4) LIMIT SWITCH- A FIELD LOCATED STOP BUTTON SOLENOID VALVE 1 THREE PHASE LOAD WITH IDENTIFICATION NORMALLY CLOSED (F) PC HIGH VOLTAGE FUSE (ABOVE 600 V) MAINTAINED PUSH-PULL BID SET PHOTOCELL LINE VOLTAGE LIMIT SWITCH-NORMALLY CLOSED-HELD OPEN OPERATOR Banks R. Wason, P.E. 304 FT TAG NO. (BALLOON) FOR DEVICE INDICATED ITEM NO. INTERCOM EQUIPMENT 10 LIMIT SWITCH-NORMALLY P.E. No. 73973, FL INTERCOMMUNICATION SYSTEM OPEN-HELD CLOSED MAINTAINED STOP-START A WS LB FOR POWER (SEE GEN. NOTE 4) AMPLIFIER - WALL STATION - LINE BALANCE A-3 3/4"C(2/C#18 SHLD.)CONDUIT AND WIRE PUSHBUTTON OPERATOR 201 East Pine Street, Suite 1000 FT MCP OR RUN FROM DEVICE INDICATED TO Orlando, Florida 32801 E DS INTERCOMMUNICATION DESK SET 10 CP-1 LOCATION INDICATED LATCHING CABLE SWITCH Engineering Business No. 2429 INTERCOM. SPEAKER (SURFACE MTD.) CAPACITOR, 3 PHASE, SIZE AS INDICATED ________________________ TIME-DELAY FUSE SOLENOID OR CLUTCH DISCONNECT SWITCH DATE ______________ INTERCOM. SPEAKER (CEILING LAY-IN) F C (F) = FUSED (C) = CIRCUIT BREAKER R PUSH-TO-TEST CR CONTROL RELAY COIL TELEPHONE OUTLET - 1"C.(2)CAT 6 CABLES MAGNETIC STARTER 1 INDICATING LIGHT TO NETWORK RACK (BACKGROUND DRAWINGS ONLY) WELDING RECEPTACLE - NEMA L9-50R COMBINATION MAGNETIC STARTER CONTROL RELAY 600V, 2P, 3W, SIMPLEX SIZE 2 FUSED UNLESS NOTED (CIRCUIT BREAKER) CONTACT-NORMALLY OPEN MAINTAINED STOP- MOMENTARY START COMBINATION LIGHTING CONTACTOR PUSHBUTTON (JOG) HS INTERCOM HANDSET - SURFACE MOUNTED LC WITH HAND-OFF-AUTO SWITCH CONTROL RELAY WITH REMOTE SPEAKER AMPLIFIER CONTACT-NORMALLY CLOSED VC INTERCOM VOLUME CONTROL R MANUAL STARTER (R) = REVERSING ZERO SPEED OR ANTI- CR PLUGGING SWITCH CP L INTERCOM SPEAKER - SURFACE MOUNTED CONTROL PANEL TWO COIL LATCHING RELAY INTERCOM HANDSET - FLUSH MOUNTED CR LOCAL TERMINALS WITH HS WITH REMOTE SPEAKER AMPLIFIER TCP TEMPERATURE CONTROL PANEL U EXTERNAL WIRING AS NOTED (LIGHTING PANEL, CONTROL PANEL, DISTRIBUTION PANEL ETC.) WALL MOUNTED 1/8 UNIT HEATER, 1/8 HORSEPOWER T UH-19 TIMING RELAY COIL ETI ELAPSED TIME INDICATOR JUNCTION BOX BUS DUCT 600 VOLT FEEDER BUS DUCT D JB (AMPERAGE AS INDICATED) TIMED CLOSED CONTACT INST. ON ENERGIZATION HEATER LIGHTNING ARRESTOR TIMING RELAY INSTANTANEOUS CONTACTS TIMED OPEN CONTACT TRANSFORMER A-3 LOW VOLTAGE HOME RUNS INST. 120/208 V 120/240 V (SEE GEN. NOTE 4) ON ENERGIZATION CONDUIT WITH CONDUIT SEAL FITTING NEMA 4 WATERTIGHT TIMED OPEN CONTACT ON DE-ENERGIZATION CONDUIT EXPOSED NEMA 4X WATERTIGHT AND CORROSION PROOF TIMED CLOSED CONTACT ON DE-ENERGIZATION CONDUIT CONCEALED EXPLOSION PROOF - NEMA 7 CLASS I, DIVISION I, GROUP D BY EXPLOSION PROOF - X1 X2 120 VAC TRANSFORMER DB DIRECT BURIED CONDUIT NEMA 9 CLASS II, DIVISION 1 UG DIRECT BURIED CABLE K KEYLOCK OE OVERHEAD LINE SD SMOKE DETECTOR EXIT EXIT LIGHT LIGHT FIXTURE 1 2 3 CONCRETE ENCASED DUCT BANK, WITH C CABLE LOCATIONS AND SPARE DUCTS AS 4 5 6 INDICATED ON DRAWINGS WALL MOUNTED LIGHT FIXTURE CCTV SECURITY CAMERA HIGH INTENSITY DISCHARGE LIGHT DC MAGNETIC DOOR CONTACT EM EMERGENCY BATTERY PACK GROUND POLE MOUNTED LIGHT FIXTURE DESCRIPTION DATE ESCAMILLAACERO, ANGELA - MARK B GENERAL NOTES: LEGEND 1. ELECTRICAL MATERIALS AND EQUIPMENT ITEMS SHOWN IN LIGHT LINE WEIGHTS ON THE DRAWINGS ARE EXISTING ITEMS TO REMAIN. ELECTRICAL ELECTRICAL MATERIALS AND EQUIPMENT ITEMS SHOWN IN HEAVY LINE WEIGHTS ARE NEW CITY OF ROCKLEDGE THIS CONTRACT. 2. FOR ITEMS INDICATED AS "FIELD LOCATE" CHECK DRAWINGS OF OTHER TRADES (IN PARTICULAR PIPING AND STRUCTURAL) FOR INTERFERENCE AND FOR LOCATIONS OF MOUNTING FLANGES, CONNECTION POINTS, ETC. Project No.: 200-53784-18005 A P:\IER\53784\200-53784-18005\CAD\SHEETFILES\E-001 LEGEND.DWG Designed By: DK - Drawn By: DK Checked By: BRW E-001 Copyright: Tetra Tech 10/24/2019 4:52:15 PM Bar Measures 1 inch 1 2 3 4 5 6 7 www.tetratech.com F ORLANDO, FL 32801 ENGINEERING BUSINESS NO. 2429 201 EAST PINE STREET, SUITE 1000 CCTV CCTV PHONE: (407) 839-3955 FAX: (407) 839-3790 BID SET Banks R. Wason, P.E. P.E. No. 73973, FL 201 East Pine Street, Suite 1000 Orlando, Florida 32801 E Engineering Business No. 2429 ________________________ DATE ______________ D CCTV BY C ESCAMILLAACERO, ANGELA - DESCRIPTION DATE MARK B N SITE PLAN ELECTRICAL CITY OF ROCKLEDGE Project No.: 200-53784-18005 A P:\IER\53784\200-53784-18005\CAD\SHEETFILES\E-002 OVERALL ELECTRICAL SITE PLAN.DWG Designed By: DK - Drawn By: DK Checked By: BRW CCTV E-002 Copyright: Tetra Tech 10/24/2019 4:52:22 PM Bar Measures 1 inch 1 2 3 4 5 6 7 FOR CONTINUATION 1"C(CAT 6) TO EXISTING SEE DWG.~ E-002 NETWORK RACK N www.tetratech.com F ORLANDO, FL 32801 CCTV DC DC 0 4'-0" 8'-0" 16'-0" ENGINEERING BUSINESS NO. 2429 1"C(2#14,1#14G) TO SCALE: 1/8" = 1'-0'' EXISTING NETWORK RACK 201 EAST PINE STREET, SUITE 1000 PHONE: (407) 839-3955 FAX: (407) 839-3790 EXISTING NETWORK RACK BID SET WIFI ANTENA Banks R. Wason, P.E. P.E. No. 73973, FL CCTV 201 East Pine Street, Suite 1000 Orlando, Florida 32801 E Engineering Business No. 2429 1"C(CAT 6) TO 40-CP-01 ________________________ 1"C(COAX) TO 40-CP-01 DATE ______________ DC D DC 1"C(2#14,1#14G) TO DC 40-CP-01 1"C(4#14,1#14G) TO DC EXISTING NETWORK RACK EXISTING PANEL 'L5' (G.E. SERIES 'A') EXISTING 1P.-20A SPARE BREAKER, CIRCUIT 17 EXISTING 40-CP-01 BY EXISTING PANEL T 'L5A' (G.E. SERIES 'A') PROVIDE 2P.-20A BREAKERS IN SPACES 5,7 & 9,11 EXISTING MCC-M1 C ESCAMILLAACERO, ANGELA - FOR CONTINUATION ~ SEE DWG. E-002 1"C(2#14,1#14G) TO 40-CP-01 DESCRIPTION 1-1/2"C(4#6,1#6G) L5A-5,7,9,11 EXISTING PANEL 'L1' 1"C(2#10,1#10G) L5-17 DATE DC DC CCTV MARK B 1"C(CAT 6) TO 40-CP-01 RAS/WAS PUMP STATION ELECTRICAL PLAN SCALE: 1/4"=1'-0" CITY OF ROCKLEDGE 1"C(2#14,1#14G) TO ELECTRICAL PLANS EXISTING NETWORK RACK RAS/WAS PUMP STATION OPERATIONS BUILDING & DC Project No.: 200-53784-18005 A P:\IER\53784\200-53784-18005\CAD\SHEETFILES\E-003 OPS & RAS ELECTRICAL PLANS.DWG Designed By: DK - Drawn By: DK Checked By: BRW OPERATIONS BUILDING ELECTRICAL PLAN E-003 SCALE: 1/4"=1'-0" Copyright: Tetra Tech 10/24/2019 4:52:31 PM Bar Measures 1 inch 1 2 3 4 5 6 7 TO CAMERA FOR CONTINUATION TO BLOWER SEE DWG.~ E-002 BUILDING FOR CONTINUATION N SEE DWG.~ E-002 EXISTING PANEL 'L4' WIFI ANTENA WIFI ANTENA www.tetratech.com (WESTINGHOUSE 'PRL1') ORLANDO, FL 32801 F EXISTING POLYMER CCTV CONTROL PANEL 0 4'-0" 8'-0" 16'-0" JB ENGINEERING BUSINESS NO. 2429 1"C(2#14,1#14G) TO DC SCALE: 1/8" = 1'-0'' 1"C(CAT 6) TO 10-CP-01 130-CP-01 1"C(CAT 6) TO 130-CP-01 1"C(COAX) 1"C(COAX) 201 EAST PINE STREET, SUITE 1000 TO 10-CP-01 DC TO 130-CP-01 EXISTING PANEL 'L3' 1"C(2#14,1#14G) TO 10-CP-01 EXISTING PHONE: (407) 839-3955 FAX: (407) 839-3790 DC 1"C(2-2/C#16TSP) 130-CP-01 TO 130-CP-01 1"C(2#14,1#14G) TO 10-CP-01 DC BID SET Banks R.
Load more

Recommended publications
  • Transportation Applications Transport Your Business to a Better Place: Leading the Race
    Product Range Guide Transportation Applications Transport your business to a better place: leading the race. Honeywell is committed to providing the right product for your application. Whether you need a standard product or a highly customized solution, our sales and engineering teams have decades of experience in the Transportation industry. We understand your applications and work diligently to ensure we provide a solution that optimally meets your technical and financial needs. Our unique combination of a broad product portfolio, deep technical capabilities and extensive application experience culminates into a powerful ability to meet your design needs. Table of Contents Introduction ................................... 2-3 Transportation product applications .......... 4-5 Speed and Direction Sensors ....................6 SMART Position Sensors .........................7 Non-contact Hall-effect Sensors & Pots .........8 Hall-Effect & Magnetoresistive Sensors. 9 Pressure and Vacuum Switches .............10-11 Board-Mount & Heavy-Duty Transducers ...12-13 Packaged Temperature Probes ..............14-15 Key and Rotary Switches ....................... 16 Shifters ........................................ 16 Push-Pull/eStop Switches ..................... 17 Hour Meters ................................... 17 MICRO SWITCH Toggle Switches .............. 18 MICRO SWITCH Basic Switches ................ 19 MICRO SWITCH Limit Switches .............20-21 Magnetoresistive Sensor ICs ................... 22 Hall-effect Digital/Linear Sensor ICs ..........
    [Show full text]
  • Typical 120V 3 Pole Contactor Example Pump Wiring Device
    CONTROL CIRCUIT & PILOT DEVICE LEGEND X1 X2 BACKGROUND PLAN AND ONE LINE SYMBOLS STARTER STARTER CONTROL 120 V SEAL-IN CONTACT FROM LIGHT TRANSFORMER STARTER CONTACTOR A1 "RUNNING" SYMBOL SYMBOL DESCRIPTION SYMBOL DESCRIPTION A-1 DESCRIPTION SYMBOL DESCRIPTION TAG THIS WIRE A1-1A (TYP) OFF R CONTROL SWITCH (SEL. OR P.B.) O SEE NOTE 2 LOW VOLTAGE DISCONNECT SWITCH PRESS. ACTUATED SWITCH SEE CIRCUITS FOR SPECIFIC TYPE HA START PUSHBUTTON 1 SELECTOR SWITCH OPERATOR STOP HAND AUTO FIELD MOUNTED 3-OL'S SEE CIRCUITS FOR SPECIFIC TYPE WITH FUNCTION SHOWN 1 A FLOAT SWITCH - FLOW SWITCH LOW VOLTAGE FUSE (BELOW 600V) FLOAT ACTUATED SWITCH (F) 1 TEMPERATURE - HUMIDISTAT SWITCH (F) ALL STARTERS SHALL BE FULL STARTER CONTACTOR (SUBSCRIPT = NO. OF STAGES) 1 CR-3 RV VOLTAGE NON-REVERSING UNLESS PUSHBUTTON COIL FOR MOTOR A1 MOMENTARY PUSHBUTTON FIELD 2 OTHERWISE INDICATED FLOW ACTUATED SWITCH A-1 LIMIT - PRESSURE - VACUUM SWITCH FVR (FVR) FULL VOLTAGE REVERSING OPERATOR-NORMALLY OPEN MOUNTED 3 (RV) REDUCED VOLTAGE SWITCH LOCATED AT (MCP) STARTER CUBICLE ELECTRICAL OR MECHANICAL ALTERNATOR 2S,2W (2S,2W) TWO SPEED, TWO WINDING MOMENTARY PUSHBUTTON STARTER CUBICLE (SEE WIRING) TEMP. ACTUATED SWITCH RELAY INTERLOCK TERMINAL STRIP OPERATOR-NORMALLY CLOSED FROM MAIN CONTROL TO MCP PANEL OVERLOAD SWITCH OR DEVICE 600V, 3 POLE MOLDED CASE CIRCUIT AUX. STARTER BREAKER, FRAME & RATING AS SHOWN LIMIT SWITCH- CONTACT TO PUSHBUTTON OPERATOR NORMALLY OPEN MAIN CONTROL A-3 SINGLE PHASE, FRACTIONAL HP MOTOR WITH MUSHROOM HEAD PANEL TERMINAL BOX 1/2 TO LOCATION INDICATED (SEE GEN. NOTE 4) LIMIT SWITCH- FIELD LOCATED STOP BUTTON A NORMALLY CLOSED STARTER NAMEPLATE SOLENOID VALVE 1 THREE PHASE LOAD WITH IDENTIFICATION (F) HIGH VOLTAGE FUSE (ABOVE 600 V) MAINTAINED PUSH-PULL EXAMPLE PUMP PHOTOCELL LINE VOLTAGE LIMIT SWITCH-NORMALLY CLOSED-HELD OPEN OPERATOR (TAG A1) 304 FT 10 TAG NO.
    [Show full text]
  • Kalamazoo, Michigan Water Reclamation Plant Electrical
    KALAMAZOO, MICHIGAN 710 AVIS DRIVE ANN ARBOR, MICHIGAN 48108 WATER RECLAMATION PLANT PHONE: (734) 665-6000 FAX: (734) 213-3003 ELECTRICAL UPGRADES SWITCHGEAR www.tetratech.com ELECTRICAL PROJECT LOCATION: CLIENT INFORMATION: E-001 ELECTRICAL LEGEND KALAMAZOO, MICHIGAN E-002 ELECTRICAL LEGEND, NOTES KALAMAZOO, MICHIGAN E-003 ELECTRICAL KALAMAZOO WATER RECLAMATION PLANT SITE E-004 ELECTRICAL SITE PLAN DEMOLITION E-005 ELECTRICAL ONE-LINE PROPOSED DEMOLITION Tt PROJECT No.: CLIENT PROJECT No.: E-006 ELECTRICAL ONE-LINE PROPOSED WORK 200-19743-19002 E-007 ELECTRICAL SWITCHGEAR FRONT ELEVATION E-008 ELECTRICAL ONE-LINE PROPOSED WORK E-009 ELECTRICAL ONE-LINE PROPOSED WORK PROJECT DESCRIPTION / NOTES: E-010 ELECTRICAL SYSTEM CONFIGURATION E-011 BACKGROUND PLAN PROPOSED WORK E-012 ELECTRICAL DEMOLITION, PROPOSED WORK E-013 PROPOSED ROOF PLAN E-014 PROPOSED ROOF PLAN MVUS NO.1 E-015 ELECTRICAL DETAILS E-016 ELECTRICAL DETAILS ISSUED: OWNER REVIEW 7-12-19 OWNER REVIEW 50% 7-25-19 OWNER REVIEW 100% 8-22-19 OWNER REVIEW FINAL 9-12-19 OWNER REVIEW FINAL 10-17-19 FOR BIDDING AND CONSTRUCTION 11-30-20 VICINITY MAP: PROJECT LOCATION 1 2 3 4 5 6 7 710 AVIS DRIVE www.tetratech.com F ANN ARBOR, MI 48108 BACKGROUND PLAN AND ONE LINE SYMBOLS I.S.A. STANDARD LETTER FUNCTIONS SYMBOL DESCRIPTION SYMBOL DESCRIPTION CONTROL SWITCH (SEL. OR P.B.) SYMBOL FIRST LETTER SUCCEEDING LETTERS PHONE: (734) 665-6000 FAX: 213-3003 SEE CIRCUITS FOR SPECIFIC TYPE FT TAG NO. (BALLOON) FOR DEVICE 10 INDICATED A ANALYSIS, ANALOG ALARM SEE CIRCUITS FOR SPECIFIC TYPE F FL B BURNER, FLAME BATCH FLOAT SWITCH - FLOW SWITCH CONTROL CIRCUIT & PILOT DEVICE LEGEND C CONDUCTIVITY, COMMAND CONTROL (FEEDBACK TYPE) TEMPERATURE - HUMIDISTAT SWITCH FT FOR POWER (SEE NOTE 2 ON D DENSITY, SPECIFIC GRAVITY T M (SUBSCRIPT=NO.
    [Show full text]
  • Pocket Program Kilowatt Exhibitors
    Megawatt Exhibitors 2016 IEEE International Power Modulator and High Voltage Conference San Francisco, CA – July 5–9, 2016 http://www.ipmhvc.org/2016 Pocket Program Kilowatt Exhibitors Sponsored By: Technically Co-Sponsored By: Watt Exhibitors Palace Hotel Conference Layout to second floor No access Registration Exhibits, Oral Breaks, Sessions Receptions Oral Sessions First Floor 1: Stangenes Industries, Inc. 18: Dean Technology, Inc. 1: Stangenes Industries, Inc. 18: Dean Technology, Inc. 2: 5S Components Inc. 19: Pearson Electronics 2: 5S Components Inc. 19: Pear son Electronics 3: JEMA Energy 20: Advanced Energy Inc 4: Pulse Power Solutions LLC 3: JEMA Energy 21: General Atomics 20: Advanced Energy Inc. 5: open 4: Pulse Power Solutions LLC 22: ITHPP21: General Atomics to first floor 6: Silicon Power Corporation 5: IEEE NPSS 23: GMW Associates22: ITHPP-Alcen 7: Pulse Power & Measurement Ltd. 6: Silicon Power Corporation 24: R&K Company Limited23: GMW Associates 8: CalRamic 7: Pulse Technologies LLC Power & Measurement 25: Barth Electronics, Inc.24: R&K Company Limited 9: Voltage Multipliers Inc. Ltd. 26: Diversified Technologies Inc.25: Barth Electronics, Inc. Poster Session C Short Courses, 10: open 8: CalRamic Technologies LLC 27: Behlke26: Diver sified Power Electronics LLC Technologies Inc. Satellite Meetings 11: Spellman High Voltage 9: Voltage Multipliers Inc. 28: Eagle Harbor Technologies, Inc. 27: Behlke Power Electronics LLC 12: L‐3 Applied Technologies, Inc. 10: open 29: TDK‐Lambda Americas28: Eagle Harbor Technologies, 13: Scandinova11: Spellman Systems AB High Voltage 30: HVR Advanced Power Components, Inc. Poster Session B 14: open12: L-3 Applied Technologies, Inc. Inc.29: TDK-Lambda Americas 15: Lockheed Martin13: Scandino va Systems AB T1:30: HVR Open Advanced Power Poster Session A 16: Kanthal‐Globar, Sandvik T2: TREK, INC.
    [Show full text]
  • Section 02660
    SECTION 00901 ADDENDUM NO. 1 Date Issued December 10, 2019 Town of Mead JVA, Incorporated WWTF Fire Alarm and Sludge Flow Meter 213 Linden Street Improvements Suite 200 441 3rd Street Fort Collins, CO 80524 Mead, CO 80542 (970) 225-9099 PART 1 GENERAL 1.1 DESCRIPTION A. This addendum forms a part of the Bidding and Contract Documents and modifies the Drawings as described below B. This addendum consists of this page and five drawings 1.2 ACKNOWLEDGMENT A. Acknowledge receipt of this addendum in the space provided on the Bidder’s Certification form. PART 2 DRAWINGS 2.1 REPLACE ALL THE DRAWINGS WITH THE ATTACHED DRAWINGS DATED DECEMBER 2019 A. Details for Drawing P1.0 were added to show installation for the effluent flow meter and pipe support for sludge loadout station B. Detail for Drawing E1.0 was added to show removal of a section of sidewalk to trench conduit for the digested sludge flow meter C. All other Drawings are the same 12/10/19 00901-1 JVA 1970.1c TOWN OF MEAD Set No._______ WASTEWATER TREATMENT FACILITY FIRE ALARM AND SLUDGE FLOW METER IMPROVEMENTS JVA, Inc. 1319 Spruce Street Boulder, CO 80302 303.444.1951 www.jvajva.com Boulder ● Fort Collins ● Winter Park Glenwood Springs ● Denver DECEMBER 2019 JVA, Inc. 1319 Spruce Street Boulder, CO 80302 303.444.1951 www.jvajva.com Boulder ● Fort Collins ● Winter Park Glenwood Springs ● Denver REVISION DESCRIPTION AND SLUDGE LOADING STATION SUPPORT – ADDITION OF EFFLUENT FLOW METER REPLACEMENT – – – – – JCD D'WN JPM DES'D DATE 12/06/19 1 NO.
    [Show full text]
  • Background Plan and One Line Symbols Wiring Device
    1 2 3 4 5 6 7 BACKGROUND PLAN AND ONE LINE SYMBOLS I.S.A. STANDARD LETTER FUNCTIONS GENERAL NOTES: SYMBOL DESCRIPTION SYMBOL FIRST LETTER SUCCEEDING LETTERS 1. ELECTRICAL MATERIALS AND EQUIPMENT ITEMS SHOWN IN LIGHT LINE WEIGHT ON THE DRAWINGS ARE CONTROL SWITCH (SEL. OR P.B.) SEE CIRCUITS FOR SPECIFIC TYPE A ANALYSIS, ANALOG ALARM B BURNER, FLAME BATCH EXISTING ITEMS TO REMAIN. ELECTRICAL MATERIALS AND EQUIPMENT ITEMS SHOWN IN HEAVY LINE F FL SEE CIRCUITS FOR SPECIFIC TYPE FLOAT SWITCH - FLOW SWITCH C CONDUCTIVITY, COMMAND CONTROL (FEEDBACK TYPE) WEIGHTS ARE NEW THIS CONTRACT. D DENSITY, SPECIFIC GRAVITY 2. ITEMS SHOWN CROSSHATCHED ON THE DRAWINGS ARE EXISTING ITEMS TO BE REMOVED. T M TEMPERATURE - HUMIDISTAT SWITCH (SUBSCRIPT=NO. OF STAGES) www.tetratech.com E VOLTAGE PRIMARY ELEMENT 3. INSTALL A SINGLE CONDUCTOR INSULATED (RHW, THHN, OR XHHW) COPPER GROUND WIRE IN EACH TEL: 734.665.6000 F FLOW RATE RATIO Ann Arbor, MI 48108 F L P V LIMIT (PROXIMITY TYPE) PRESSURE - VACUUM SWITCH CONDUIT, SIZE AS SHOWN ON DRAWINGS OR AS A MINIMUM PER THE NATIONAL ELECTRICAL CODE. THIS G GAGING GLASS GROUND WIRE SHALL BE CONNECTED AT EACH END TO THE EQUIPMENT GROUND. CONDUIT SHALL BE ELECTRICAL OR MECHANICAL ALTERNATOR (SEE WIRING) 710 Avis Drive, Suite 100 ALT H HAND, MANUAL HIGH 3/4" MIN. I CURRENT INDICATE 4. THE FOLLOWING COMPONENT IDENTIFICATION SHALL BE USED AS OS OVERLOAD SWITCH OR DEVICE J POWER SCAN APPROPRIATE: TB TERMINAL BOX K TIME, TIME SCHEDULE CONTROL (NO FEEDBACK) L LEVEL, LIGHT LOW 4.1. (F) FIELD MOUNTED NOT AT STARTER OR OTHER CONTROL PANELS.
    [Show full text]
  • Electric Switches; Relays; Selectors
    H01H CPC COOPERATIVE PATENT CLASSIFICATION H ELECTRICITY (NOTE omitted) H01 BASIC ELECTRIC ELEMENTS (NOTES omitted) H01H ELECTRIC SWITCHES; RELAYS; SELECTORS; EMERGENCY PROTECTIVE DEVICES (contact cables H01B 7/10; electrolytic self-interrupters H01G 9/18; emergency protective circuit arrangements H02H; switching by electronic means without contact-making H03K 17/00) NOTES 1. This subclass covers (in groups H01H 69/00 - H01H 87/00) devices for the protection of electric lines or electric machines or apparatus in the event of undesired change from normal electric working conditions, the electrical condition serving directly as the input to the device. 2. This subclass does not cover bases, casings, or covers accommodating two or more switching devices or for accommodating a switching device as well as another electric component, e.g. bus-bar, line connector. Those bases, casings or covers are covered by group H02B 1/26. 3. In this subclass, the following terms or expressions are used with the meanings indicated : • "relay" means a switching device having contacts which are operated from electric inputs which supply, directly or indirectly, all the mechanical energy necessary to cause both the closure and the opening of the contacts; • "driving mechanism" refers to the means by which an operating force applied to the switch is transmitted to the moving contact or contacts; • "operating" is used in a broader sense than "actuating" which is reserved for those parts not touched by hand to effect switching; • "acting" or "action" means a self-induced movement of parts at one stage of the switching. These connotations apply to all parts of the verbs "to operate", "to actuate" and "to act" and to words derived therefrom, e.g.
    [Show full text]
  • Table of Contents Pressure Switch Selection Guide
    Table of Contents Pressure Switch Selection Guide ....................................................................................................... 5 Electronic Pressure Switch ....................................................................................... 5 Mechanical Pressure ................................................................................................ 8 Pressure Switch Application Example ...................................................................... 9 Series ZSE30/ISE30 High Precision, 2-color Display Digital Pressure Switch.................................. 12 Features.................................................................................................................... 13 Series ZSE30/ISE30 High Precision, 2-color Display Digital Pressure Switch........ 15 How to Order ............................................................................................................ 15 Specifications............................................................................................................ 16 Setting....................................................................................................................... 17 Dimensions ............................................................................................................... 21 Precautions............................................................................................................... 24 Series ZSE40/ISE40 High Precision, Digital Pressure Switch..........................................................
    [Show full text]
  • PRELIMINARY Book of Abstracts
    2016 IEEE Power Modulator and High Voltage Conference Tuesday, July 5, 2016 - Saturday, July 9, 2016 <a href=http://www.sfpalace.com/>Palace Hotel San Francisco</a> Book of Abstracts ii Contents Daily Operation of Z: An 80 Terawatt, 36 Module Pulsed Power Driver 3 .......... 1 Core and copper loss effects on the stepped impedance transmission line pulse generator 99 ............................................... 1 Charge trapping/detrapping characteristics and lifetime of solid dielectrics 88 . 1 Design of Bipolar Pulse Generator Topology Base on Marx Generator Supplied by Double Power 124 .......................................... 2 Two-dimensional numerical modeling of electric field and correlation to breakdown –Area scaling 10 ........................................... 2 Design and testing of a compact low impedance Marx generator with quasi rectangular pulse 64 ............................................ 3 Energy Consumption Characteristics of Pulsed Arc Discharge in High Pressure Carbon Dioxide up to Supercritical Phase 162 ........................... 3 Initial Evaluation of the Load Current Multiplier Concept on the Sandia Z Accelerator 74 4 An AC Arc Discharge Model for Ice-Covered FRP Live-Line Tools 185 ........... 4 Characterization of Double-Positive Metamaterials for Advanced Applications 184 . 5 Repetitive pulse X-rays generator based on all solid state pulsed power source 258 . 6 Seismic Wave Characteristic of Ground Surface Layer Produced by Pulsed Discharges in Closed Water Domain 42 .................................. 6 The Anaysis of Time to Breakdown in Various Gas Insulation Systems 163 . 7 Study of the deterioration of conductive coatings used in form-wound motor coils by fret- ting wear tests 299 ...................................... 7 Influence of Impulse Waveform Parameters on the Breakdown Voltage in SF6 Highly Inho- mogeneous Electric Field 246 ................................ 8 HIGH-FIELD EXCITED FLASHOVER ACROSS SOLID DIELECTRICS IN VACUUM: MECH- ANISM AND SUPPRESSION 139 .............................
    [Show full text]