DOCSLIB.ORG

Redbank Railroad Snacks Are Laid out Perfectly

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Redbank Railroad Snacks Are Laid out Perfectly THE SUPERS REPORT MAR- 2013 Vol. 20 Issue 03 Thank you Bill. I thought the layout run well and the guys I brought with me were impressed. I MAP for March meet. am hoping that I can get my guest (the young one) to eventually be a Division member. He likes trains and I hoping to keep his interest. I got to run 2 trains. If you didn't get to run you missed out. Of course, the impressive run of the day was the over 50 car double stacks train with pushers. It left New York and ran all the way to Butler. The really impressive feat was up the hill to Mt. Jewitt and back down the other side. Great job by the engineers. Then what can I say about the great meal that NORA put on? If you walked away from there hungry... There is something wrong with you. Again thanks Nora and you too Bill. Next meeting will be at Howard Helman's. His layout, if you have never been there (and I hate to say this because Howard's head might get TOO big) models the Western Maryland and is really WHY ME ? great to operate on. Well, here we go again. To another scheduled Divi- sion meeting at Howards'. Now it's not that his Western Mary- See you next month. Rolly land layout isn't in really great shape and isn't fun to operate on. But I hate his layout, because it's always in great shape and everything is in it's place. Where is all the dirt, the cob- webs and all the other junk and mess I always make when I WWW.div11-mcr-nmra.info work on my layout? And the floor! Mine is always a mess and his? You could just about eat off it. My thought is that he has his wife come down and scrub the floor every day. Even his Redbank Railroad snacks are laid out perfectly. I don't know? I have a hard time trying to find anything wrong with his layout? Rolly Miller Owner/Operator I go home and try to put my layout in shape. I see how Offices at: 110 Hamilton St. Howards is, and I just end up with more of a mess! Now every- New Bethlehem, PA 16242 one should know why I don't like Howard!!! (tongue in Email: [email protected] cheek). Transportation for: Oil, Fuel, Coal, and Lumber And yes, of course, his layout will look great! Now eve- through the forests of Elk, Forest, Jefferson, ryone can see the layout that drives me crazy. McKean, and Warren Counties. Northwest PA. See everyone Sunday.............. Since 1947 DCC Rolly Signature Scene Rockville Bridge here remains the only known model to scale. As a signature scene, it has good notoriety - at least in this state. On a Saturday recently, the creator of the castings for the bridge, Bob Jans of Yardley, brought four other modelers to Treasure Lake for a photo and run session. They are accomplished modelers and operators, and I have visited three of their layouts in previous years. They arrived from Tunnel Hill Inn in Cresson just after noon. A walk-through quickly revealed just how fast a study these modelers were. They each received a Time Table/Rule Book, a throttle and a Clearance Card and orders. Nothing beats a run over the railroad to understand what the layout is about. Soon five through trains were on their way, with Bob Jans recording the action and helping with challenges. Initially cautious about N scale, with some early stalls and derails, the group quickly adjusted to this smaller environment. Soon they appreciated just how large an area is modeled, enjoying long runs, interesting switch- ing, and appreciation for direction and distance. To my amazement, the layout worked very well, and most of the rolling stock except for one unmodified unit mineral train ran well. My visitors enjoyed taking pictures, film- ing long trains on multiple track, and the mix of passenger and freight move- ments. They had Time Tables with a layout schematic along with stations and siding lists to take home. And they learned the fine art of enjoying Vernors! Some lessons learned: The wide variety of DCC throttles among and within various manufacturers leads to difficulty breaking habits while learning new procedures; helices are a bane to impatient runners and switch puzzle artists, but are a sheer joy to experienced operators who enjoy prototypically long runs and the joy of moving tonnage over the miles; everyone has their own pace and penchant for perfection, so letting operators struggle with choices, problems and unusual situations leads to less, not more, frustration, and the host as more helpful and less critical. I still feel great having hosted the most successful op session to date. And I had just finished heavy construc- tion that week (which I assure you, is NOT the way to plan and prepare). boB McKay Pennsylvania RR Co. Susquehanna Division - Eastern Region Construction & Transportation Office at 1267 Treasure Lake Dubois, PA 15801 N Scale/Digitrax DCC Division Super: Bob McKay [email protected] 14th Annual Train Jamboree Sponsored by Division 11, Mid Central Region, National Model Railroad Association Inc. MODEL RAILROAD DAY DUBOIS MALL SATURDAY, MAY 4 2013 Local Modelers enjoying the World's Greatest Hobby 10 AM Open to the Public ---- No Fee 4 PM Train Layouts Various Scales Hobby Sales Model Making Display Items Historical Interest Prototype Material Limited Tables Available Call 814-591-5415 Prizes Questions Answered How to Start Getting Serious BRING & BRAG REPORT Feb 2013 Steve Waltman B&B Chairman 8 entries total for B & B February 2013. “Railroad Related Structure”. The competition took place at Bill Drummond’s in Punxsy. Modelers must register their models on the Sign-Up sheet, & fill out a description card. One model, monthly. Cooperation will en- able the B&B Committee to keep accurat re- cords. B&B for March is IGMO related. FEB Entries. 1st place Bill Drummond……Salamanca Station 2nd place Bob McKay……..…Paper Mill Building 3rd place Larry Brown…….....Farmer’s Co-op…… “ Mike Rabbit…Milk Platform Honorable Mention: Bob Ginter……....Speeder Shed Paul Kurutz……...Rico Station Gary Lasher……..Compressor house and tank Bob Netzlof.…….Arlee Station Totals for 2012: Chris Lasher 5 Larry Brown 5 Bring & Brag Categories for 2012/2013 Gary Lasher 6 Mike Rabbitt 5 Harry Dunworth 3 Rolly Miller 2 March ’13 IGMO April ’13 locomotive Paul Kurutz 5 Zack Roush 2 May ’13 3 car passenger train Bill Drummond 7 Alan Morean 0 June ’13 mineral handling car Bob Ginter 4 Galon Tonell 0 July ’13 open loads - anything August ’13 something kitbashed Bob McKay 6 Howdy Veihdeffer 0 September - RR related Structure Bob Netzlof 4 Steve Waltman 0 October - RR intermodal related November - Your latest project January ’14 – open loads - mineral February ’14 - Something whimsical - would a RR really own one of these? March ’14 – work train cars/equipment Schedule info for Bring & Brag for 2013/14. Note: Schedule subject to change at any time as needed to accommodate schedules and locations. Update 2-19-2013 Steve Waltman From: [email protected]. The TIMETABLE To: NMRADIV11 By Bob Netzlof Re: Another fine meet on Sunday. I'm reminded again, just how much inspiration Bill's MAR 10 NMRA MCR DIV 11 MEET layout has given me over the years, and it never ceases. As you all know, I'm modeling the BR&P also, and Howard Heltman Chicora PA I'm trying to do it as faithfully as possible. Mar 16, Harrisburg NRHS Railroad Show & Sale Steelton PA Bill reminds me that it can be done, and his work Mar 16-17, Division 5 Railfest Show & Flea Market reminds me that it'll look cool when it is done. Kirkland OH Its nice having a prototype railroad to model exactly, Mar 17, Versailles VFD Train Sale & Show and its good to have a prototype model Versailles PA railroad to follow! Mike Zollitch Mar 22-23, RPM - East Seminar Greensburg PA ED NOTE: Mike is making a list of all the things Mar 22-23, East Coast Large Scale Train Show York PA NOT TO DO. I welcome the taking of notes. Apr 7, Medina Model Train & Toy Show Medina OH OH, Mike, and try NOT to use Outdoor rug on the Apr 13, So. Baldwin VFC Show Baldwin Twp PA sides of the layout. Apr 13-14, Great Scale Model Train Show The FUZZY EDGE is totally MINE. BTF Timonium MD APRIL 14 NMRA MCR DIV11 Meet SUBSIDIARY OF Larry Brown ST Marys, PA GREENTREE Apr 14, Beaver County MR and Hist. Soc. Train Sale STEEL CORP Monaca PA TRANSPORTATION Apr 17, Model Railroad Home Tour DIVISION Westmoreland County, PA BESSEMER WORKS #3 Apr 27, Div2 Jamboree Moon Township PA GARY & CHRIS LASHER May 4, Allegheny Plateau Div Jamboree 371 MAPLEVALE ROAD BROOKVILLE, PA 15825 DuBois PA N. BESSEMER YD OFFICE (814) 849-2573 May 11, Great Lehigh Valley Train Mt Allentown PA [email protected] HO Digitrax DCC May 15-18, Mid Central Region Convention Dayton OH May 16-19, 50th Annvsy Railfan Weekend Cass WV May 16-19, PRRT&HS Annual Meeting Strasburg PA May 16-19, Pennsy Days RR Museum of PA MERCHANDISE SERVICE Strasburg PA May 25-27, Steam Excursions to Horse Shoe Curve PRR NORTHERN DIVISION Lewistown PA Mainline from Drury Tower to Riblet Yard JUNE 9 NMRA MCR DIV 11 MEET Interchanges at Kane, Warren & Cory Paul Kurutz Paul KURUTZ RENOVO PA HO/Lenz DCC PRR Northern Division Super 2012 Station Stops and Host OFFICERS& COMMITTEE Heads JAN Brookville Gary Lasher SUPERINTENDENT: Rolly Miller [email protected] 814-275-2521 FEB Punxy Bill Drummond ASST SUPER/Events: Harry Dunworth [email protected] 814-371-2616 MAR Chicora Howard Heltman TREASURER: Bob McKay [email protected] 814-591-5415 APR StMarys Larry Brown CHIEF CLERK: Steve Waltman [email protected] 814-849-3398 MAY Dubois Mall JAMBOREE N/L EDITOR: Bill Drummond [email protected] 814-938-6173 JUN Renovo Paul Kurutz N/L PUBLISHER: Bob McKay [email protected] 814-372-2065 JUL Field Trip Titusville OC&T ACHIEVEMENT Paul Kurutz [email protected] 330-592-1800 AUG Reynoldsville Galon Tonell BRING&BRAG Steve Waltman [email protected] 814-849-3398 SEP St.
Load more

Recommended publications
  • The Switchlist
    The Switchlist Official Publication of the Pacific Northwest Region, National Model Railroad Association February 2021 In This Issue • PNR News and Announcements: Idaho Rails 2021 Update Calling All Modelers Call for Nominations—PNR Presi- dent’s Award In Memorium Listing of New PNR Members A Different Kind of Train Event • Features: My Name is John and I’m a Model Railroader Basic Electricity … no math. I promise (Part 6 of 10) My First Experience with Urethane Castings How to Build a Model from Basic Pro- totype Information • Officer, Staff, and Division Reports • PNR Interchange • Timetable Idaho Rails 2021 will feature a number of virtual layout tours such as Rick Uhlenkott’s N scale Leisure Prairie Railroad. Nature Abhors a Vacuum We’ve all heard that before. If COVID-19 has created a vacuum in mod- el railroading social events (conventions, meets, shows, ops sessions), it has become increasingly challenging to find that vacuum. I’m not saying we don’t The Switchlist miss that aspect of the hobby, but model railroaders appear to be highly adaptive creatures. If we have time to devote to the hobby during these times Editor: of physical isolation, there are still multiple ways to connect with fellow mod- Greg Kujawa 406.589.6256 el railroaders. Are you taking advantage of them? Email: [email protected]. Note on page 2 that the 2021 PNR convention is on track and will be held as a virtual event. The dates are set and more details will be forthcom- The Switchlist is the official publication of the Pacific Northwest Region, National Model ing.
    [Show full text]
  • A Dccconcepts “Modelling Advice” Publication
    A DCCconcepts “Modelling advice” publication DCC Advice #11 Page 1 Wiring Point-work & Special track conditions for DC or DCC Wiring the track… In plain English, with diagrams! If we had a $ or £ or € for every time we’ve been asked how to wire track and point-work, we’d be writing this on a beach somewhere while sipping a cold beer! A great layout needs good trackwork, so first - a word about trackwork and getting good performance. Choose carefully! DO think about making your own turnouts if you have even moderate skills. It is not as hard as you think, needs only basic skills and tools... and we do our best to make it easy with our top quality gauges, trackwork frets and templates. PLUS we will soon provide a detailed “How to make track” tutorial too. Interested? Then call or email us and we will do our best to help you. No matter what scale you will model in, DO NOT even consider using insulated frogs! Yes, lazy retailers who do not understand what they sell - and modellers who have never done a proper job of laying track so it runs well may well recommend it to you… but do NOT be tempted. No matter which brand makes the turnouts, if you use insulated frogs, you WILL have small locos stalling or also suffer from wider wheels bridging the frog tip and creating momentary shorts that are hard to fix and really are a source of constant frustration. Use more realistic rail sizes please: Usually this will be code 55 in N, or Code 75 and 83 in OO or HO Scale.
    [Show full text]
  • Proto-Sound 3.0
    2014 HO MODEL TRAINS Proto-Sound® 3.0... THE RICHEST SET OF FEATURES IN MODEL RAILROADING! Whether you operate with a conventional transformer or in com- GREAT SMOKE They’ll run in perfect synchronization with each other at any mand mode with DCC or DCS™ (M.T.H.’s Digital Command Sys- Proto-Sound engines feature fan-driven ProtoSmoke™, the most speed. You can even set your lashup so only the lead engine’s tem), the Proto-Sound 3.0 system available in every locomotive in powerful smoke system in the hobby. You can vary the intensity bell and whistle will sound, as in real life multiple-unit operation. this catalog offers more realism, more fun, and more variety than with the smoke “volume” control on the locomotive or remotely any other locomotive control system in any scale. with any DCC or DCS controller. DCC Features VIVID ENGINE SOUNDS SYNCHRONIZED CHUFF AND PUFF Proto-Sound 3.0-equipped locomotives can be controlled in com- Proto-Sound features crystal-clear digital sounds. We strive to mand mode with any DCC-compliant command control system. Like a real steam engine, M.T.H. steamers feature puffs of smoke While you won’t have access to all of the incredible features of make our sounds as authentic as possible, using the charac- and steam chuff sounds synchronized with the drive wheels. Bet- Proto-Sound 3.0, you will have full DCC command control. This teristic whistle for a particular steam engine, for example. With ter than any other model train, an M.T.H.
    [Show full text]
  • President's Message
    Branch Line - 1 USPS 870-060 ISSN O7449771 VOLUME 60 NUMBER 3 July-September 2003 President’s Message Gene Mayer I began composing this I met PNR Trustee Roger Presidents Message 1 message in mid-June prior to Ferris on a Sunday afternoon Made in the PCR 3 leaving for Dayton, Ohio to prototype tour and he advised BOT Report 4 attend my niece’s wedding and me that the meeting was over in Designing Comfortable Layout continuing on to Toronto, one day. Roger, Stan Ames of Spaces 5 Canada for the NMRA national NER and Ray DeBlieck said the Editor’s Notebook 6 convention. I was concerned Board of Trustees worked Impressions of Convention 8 about what the Board of together and reached several View from the Left Seat 9 Trustees (BOT) compromises. The PCR Leadership Conf 10 would do · PCR needs to develop BOT adopted the Model RR’ing Is Fun 11 concerning the an educational program new NMRA long- Operations SIG 12 proposed and specifically assign range plan and Coast Division Report 16 administrative mentors to advise and approved the GATS Staffing 17 reorganization assist new and existing proposed new Napa Wine Train 18 and single members and modelers. single Achievement Program 20 membership. Divisions should membership. I sat PCR ‘04 Clinics 21 Our PCR Yahoo emphasize advanced at the same table Tales of the SCN 22 Groups Internet planning and as NMRA Modeling Sawmills 24 messages have notification of meeting president Alan Golden State/East Bay 27 been full of dates. Pollock during the S Scale in Review 28 member Layout Design Non Rail Activities 30 comments · PCR should create SIG banquet and New PCR members 31 concerning the subdivisions in remote he is very PCR Convention Registration future of areas to provide more optimistic Form 32 NMRA and the local activities.
    [Show full text]
  • Super Details for Any Scrap Yard
    41-March2011Flyer.ps 2/7/11 5:18 PM Page 41 Super Details for any Scrap Yard It’s all in the details – Yesterday’s wrecked car is tomorrow’s gleaming new stove, thanks to the hard working crew at Washington Salvage Scrap Yard. Collecting and processing all kinds of recyclables for shipment, these busy trackside facilities are perfect for odd-shaped layout spaces. Using these all-new machinery kits and detailed resin castings, it’s easy to build a custom scrap yard, junkyard or other industrial scene for your HO layout. Plastic Kits • Easy to Assemble Washington Salvage Horizontal Baler/Logger Corrugated Fence • Complete Instructions 933-2928 $49.98 NEW 933-3631 $24.98 NEW 933-3632 $14.98 Conveyor Ferrous Shear 240 Scale feet total fence length. • In Stock Includes three double-panel gates. NEW 933-3645 $14.98 NEW 933-3630 $24.98 Detailed Detailed Positionable Output Hydraulics Conveyor 933-3630 End 933-3631 933-3645 All-New Resin Details • One-Piece Castings – Tire Pile No Assembly 933-3637 $12.98 Needed Junk Automobiles Junk • Factory Painted Row 933-3633 $16.98 Scrap Metal Bales Truck Row 933-3639 $16.98 • Great Detail for 933-3635 $12.98 Other Industries • Spring 2011 Railroad Delivery Miscellaneous Scrap Pile Flattened Cars 4-Pack 933-3638 $12.98 933-3634 $16.98 Scrap Pile 933-3636 $16.98 Perfect Add-ons: Proto 52'6" Drop End Mill Gondola (page 31) & Kibri Excavator w/Gripper (page 57) Preproduction models shown assembled and painted. Details may vary. Delivery date and prices shown were accurate at press time, for updates visit walthers.com.
    [Show full text]
  • SMALL PLANS (Under 140 Square Feet) 24 EMD Progress Rail — HO Modeling a Locomotive Factory
    Contents .......................... 4 22 Alexandria Waterfront — O INTRODUCTION urban switching during the Civil War ............. 48 23 Trans-Iranian Railway — HO Lend Lease over the Persian Corridor ............ 50 SMALL PLANS (under 140 square feet) 24 EMD Progress Rail — HO modeling a locomotive factory.................. 52 1 Canton Railroad — HO 25 Ballard Terminal Railroad — HO switching a soap factory ....................... 6 a Seattle shore-front short line .................. 54 2 American Can — HO or N 26 Sunon Motors — HO modeling a full-sized industry................... 8 switching auto trains during a shift change ........ 56 3 Free-mo Steel — HO 27 Powder River Basin — N or Z a heavy industry on a modular layout............. 10 a BNSF-UP joint coal line ...................... 58 4 Bear Island Paper Mill — N 28 DaniCa Forest Products — HO a paper mill served by CSX .................... 12 a southeastern chemical paper mill .............. 60 5 Mower Lumber — N 29 Rockport & Weak — On30 a West Virgina lumber railroad .................. 14 a Maine narrow gauge freight hauler ............. 62 6 Warrenton — HO 30 Soldier Summit — N a British-style layout of a stub terminal ........... 16 running three railroads over the Wasatch ......... 64 7 First Steel — HO a steel mill railroad that can grow ............... 18 8 Keystone Viaduct — N Ntrak modules for home or show................ 20 LARGE PLANS (over 300 square feet) 9 Brooke Yard — HO 31 Winding Gulf — HO a pocket terminal in a tricky space ............... 22 modeling two coal railroads in one valley ......... 66 10 Overland Route — HO 32 Wiscasset — On30 a tribute to the transcontinental railroad .......... 24 the WW&F, past and present ................... 68 11 Menil-La-Tour — On30 or O14 33 Everett Street Station — HO running a WWI narrow gauge railroad ...........
    [Show full text]
  • WB&A Chapter Newsletter
    WB&A Chapter Newsletter Washington, DC, Baltimore & Annapolis, MD WB&A Chapter Train Collectors Association website: http://www.wbachaptertca.com “Forging into the next Century” Vol. 7 No. 1 The Official Newsletter of the WB&A Chapter, Eastern Division TCA Jan., Feb., Mar. 2006 Editor & Publications Manager: Robert Drake ~ Chapter Webmaster: Debbie Geiser The President’s Message Board of Directors President ~ Art Tate WB&A Chapter has a new President and that person is me, Vice President ~ Stan Dobrzycki Art Tate. I have been a member of the Chapter for over seven years and during that time served as Treasurer and Treasurer ~ Glenn MacKinnon Vice-President. I would like to thank the membership for Secretary ~ Nicholas Tentzeras displaying their confidence in me by electing me President, I Past President ~ Dan Danielson will do all I can to prove that confidence is well-founded. I Director/Membership follow two great Presidents in Sam Geiser and Dan Danielson Chairman ~ Robert Heine who have elevated WB&A to the prominent and respected Director ~ Fred Krochmal organization it has become. They have left the Club in excellent financial condition and have fostered fellowship, Director ~ Carol McGinnis trust and a progressive attitude among the Board of Directors Director ~ Mary Jackson and the general membership. They will be tough acts to Director ~ Frank Vacek follow but with their guidance and the counsel of an active Director ~ Robert Drake and informed Board, I hope to maintain WB&A on the path Eastern Division Director ~ Brian of excellence. Even with the great strides of the past years, much still Reilly remains to be done on the local as well as the national scene.
    [Show full text]
  • NMRA RECOMMENDED PRACTICES RP-7 for Clearances and RP-6 and RP-8 for Multiple Track Centers for Various Radii
    CURVATURE AND NMRA RECOMMENDED ROLLING STOCK PRACTICES March 2018 RP-11 Equipment should be designed and built to operate satisfactorily at restricted speed (20 scale miles per hour) through the minimum turnouts and minimum radius curvature specified below. For operation at typical main line scale speeds (see DATA SHEET D4d), specifications for a higher class should be used. Equipment in each class should be restricted from portions of layouts with less than the specified minimum radius and turnout frog. Use of the largest radius curves, properly eased (see DATA SHEET D3b, D3c, D3c.1), consistent with the design limitations of the individual layout, is strongly recommended for best operation and appearance. In this revision of the RP, separate tables are provided for traction (streetcars, interurban railroads, light rail, elevated or subway) and for locomotive-hauled (steam, diesel or electric) railroads. To allow construction of model railroads in available spaces, model railroad equipment is designed to operate on curves and turnouts which are much sharper than the prototype. The values shown below reflect a judgment of the trade-off between practical space requirements and the need to accommodate greater truck rotation by adjusting or eliminating underbody detail. Certain steam locomotives having 10 or more coupled drive wheels may need to have one or two axles with ″blind″ wheels (without flanges) to operate successfully. Certain models, particularly entry level, operate on tighter curves. Highly detailed brass models may require larger curves. TRACTION (Streetcars, interurban, light rail) CLASSIFICATION OF EQUIPMENT Class Key Description Street Cars A Streetcars, single or coupled with a tow bar or couplers.
    [Show full text]
  • N SCALE • INCLUDES COMPLETE TRACK LISTS MAGAZINE • a SUPPLEMENT to MODEL RAILROADER MAGAZINE Workshop Tips Two Great Layouts for Beginners
    • PLANS FOR GETTING STARTED IN HO OR N SCALE • INCLUDES COMPLETE TRACK LISTS MAGAZINE • A SUPPLEMENT TO MODEL RAILROADER MAGAZINE Workshop tips Two great layouts for beginners HOSCALE N SCALE • How to build simple table benchwork using plywood or a hollow-core door • Complete wiring instructions for both layouts • Tips for laying and ballasting track • Scenery techniques for backdrops, rocks, water, trees, and more! 618265 Introduction For some, building a model railroad means depict- ing hard-working trains running through rugged mountain passes, as seen on Eric Brooman's HO scale Utah Belt railroad. Eric Brooman photo Others see model railroading with an eye on short trains running on casual schedules, as illustrated by this Eastern fishing village called Maggie's Cove, built by Dave Methlie. Jim Forbes photo And still others try to capture the excitement of express passenger trains on fast main lines, like modeler Bill Aldrich has created on his HO scale New Haven layout. Paul Dolkos photo uilding a layout is the ultimate expres- A great way to jump into the hobby with sion of the hobby of model railroading. both feet is to build a small layout. These are While making models of trains and good for practicing techniques or trying structures is very rewarding, putting new scales, and they have the benefit of Bthem all together to construct a miniature showing quick results. The following pages world, like those shown in the photos on contain plans for two such layouts, and both this page, gives those models a purpose. make interesting model railroads. © 2011, Kalmbach Publishing Co.
    [Show full text]
  • Small Wonder Tt-Scale Emd Sw1200
    Athearn’s Genesis GP7u/GP9u “Topeka Cabb”” SMALL WONDER TT-SCALE EMD SW1200 from SazModel Atlas N-scale ACF 89-foot Flatcar Blair Line’s HiWay Café kit in HO Volume 20, Issue 1 • January 2014 $5.99 US/CANADA WalthersProto HO Pere Marquette E7 0 1 > Two New Rock Island Books Plus Trainfest 2013 Coverage 7 25274 24091 3 The Train List TT SCALE Columns & Departments Events & Activities ................................................................94-95 From The Archive .................................................90 Classified Ads ........................................................................... 96 Dealer Directory ...................................................................91-93 Advertising Index ......................................................................97 8 January 2014 — Model Railroad News — www.ModelRailroadNews.com Special Interest 16 — Trainfest 2013 28 — Prototype Profi le: Dash 9-44CW 93 — Pacifi c Science Center 40th Annual Model Train Show N-Scale Review 24 — Atlas: ACF 89-foot, 4-inch Flatcar TT-Scale Review 50 — Cover Story SazModel: SW1200 Diesel Switcher HO-Scale Reviews 20 — Athearn: Canadian Pacifi c ES44AC 32 — Kato: Amtrak Phase IVb Superliners 36 — Bachmann: Porter 0-6-0 Side Tank Locomotive 42 — Fresh from the Paint Shop ExactRail: Evans 4780 Covered Hoppers 46 — Piko: DB V200 Diesel Locomotive 56 — Walthers: Pere Marquette E7A 62 — Athearn: Burlington Northern GP38–2 80 — Blair Line: Hiway Café kit Book/DVD Reviews 70 — Indiana University Press: The Rock Island Line Book 72 — University Press of Kansas: Rock Island Requiem: The Collapse of a Mighty Line Book 74 — Pentrex: California Western Railroad DVD 78 — University of Minnesota Press: Harriman vs. Hill: Athearn’s Genesis GP7u/GP9u “ Wall Street’s Great Topeka Cab”b” Railroad War Book SMALL WONDER TT-SCALE About the Cover: EMD SW1200 Dressed in Southern Pacific’s red and gray, SazModel introduces its first North American prototype ready-to-run diesel model, a TT-scale EMD SW1200.
    [Show full text]
  • FLYER Find a Hobby Shop Near You! Visit
    May2012FrontCover 3/28/12 12:02 PM Page 1 FLYER Your Number One Resource for Model Railroad Product Information DON'TDON'T MISSMISS THETHE NEWNEW 0-8-000-8-0s-8-0s SD9SD9 ENGINESENGINES ROLLROLL ININ MAY 2012 Sale Ends 6-30-2012 Find a Hobby Shop Near You! Visit walthers.com or call 1-800-487-2467 2-MayOnline.ps 4/10/12 5:28 PM Page 2 WELCOME WHAT’S INSIDE From the garden to the basement, we’ve got great springtime railroading projects in the May issue of Walthers Flyer. National Train Day is May 12 so join the celebration in your community. Steam into summer with our latest run of USRA 0-8-0s in HO and N Scales! The prototypes of these sturdy locos ran into the late 50s and are perfect for yard and industrial chores. Check out the new features now on pages 4 and 6. The perfect diesel for road freights, branchlines, switching, commuter trains and more, the Alco RS-2 was the backbone of many first generation diesel fleets. Walthers 0-8-0 Locomotive Adding them to your roster is easy with new releases in HO and N Scale, New Numbers in HO & N Scale pgs 4 & 6 shown here for the first time on pages 6 and 7. Give your freight traffic a boost with the latest WalthersProto™ Ortner Hoppers and WalthersMainline™ Stock Cars, all listed inside starting on page 5. Period passenger service isn’t complete without some of the famed Pennsylvania R50b Express Reefers on your railroad. Read about the new WalthersProto release on page 5 in this issue.
    [Show full text]
  • TRACKWORK… Doing It Right a Clinic by Rich Kolm • 2006 PCR Convention “River City Express” in Sacramento
    TRACKWORK… doing it right A clinic by Rich Kolm • 2006 PCR Convention “River City Express” in Sacramento INTRODUCTION TRACKWORK DESIGN Whether you are new to model railroading or have been Curves around for a while, this quick review of trackwork design Just as with real railroads, there are several factors that and construction should give you some useful ideas and have to be considered in laying out curves: minimum radius, insights. It covers the things that are important for reliable, spiral curves, superelevation, and s-curves. trouble-free operation of trains while creating a more-realistic • Minimum Radius. If prototypical radii were used for a appearance. The purpose is enjoyment of this great hobby. model railroad, the space required would be tremendous. In Dimensions are given for HO scale, but the information HO scale, the minimum radii would be: applies to the other scales as well. Track planning handbooks Mainlines 130” and the NMRA standards and recommended practices cover Mainlines in mountains 100” all the popular scales. The mention of proprietary products and Branch lines 70” specific publications is only for information and does not Sidings and yards 50” represent any endorsement. Obviously, there has to be a compromise. Larger radii Information regarding trackwork design and construction would be closer to the prototypical dimensions, would give a is on the Internet and experience with trackwork design and realistic appearance, and would provide smooth operation. construction is shared at various online discussion groups. For example, in HO scale a radius of 48” or larger would be ideal. However, we have to use smaller radii to accommodate Reliable operation is many things the limited space confronting most layouts.
    [Show full text]