PIPES & SUPPLIES 9- IES es p UPPL 800/458-0289 www.organsupply.com S & & provided for Metal Flues, for Wood Pipes, and for Reed Pipes to assist you in preparing your your preparing in you assist to Pipes Reed for and Pipes, Wood for Flues, Metal for in provided variations many the of some outlines information construction following The order. custom pipe. of kind each for provided be can that details Organ Pi Organ provide we pipework American-made quality, high the of proud justly is Industries Supply Organ pipe experienced our by specifications your to crafted carefully is pipe Each customers. our for is Sheet Check A instructions. your to voiced carefully then workshop, PA Erie, our in makers ES 6 P I © 200 P 9- PIPES & SUPPLIES

D) C) B) A) Thebasic organ metal alloys are: reasons. compositionsused are selected for visual or tonal tinand lead in various percentages. The metal Metalused for organ pipes consists of alloys of Pipe Metal A M

Antimoniallead, 94% lead, 6% antimony bothsides 75%tin, 25% lead, (plain tin) planed on linenside 50%tin, 50% lead, (spotted metal) planed on topside 30%tin, 70% lead, (common metal) planed on E T A LFLU

lloys E P I P ES w.raspl.o 800/458-0289 www.organsupply.com lookcomparable to polished tinpipes. lacqueror highly polished and lacquered to befinished in gold or aluminum colored exposedor to be used in afacade, they can colorof natural zinc. When zinc pipes are coloredlacquer which approximates the Zincpipe standard finish is aluminum dependingon the visual result required. zinc.Zinc can be finished in several ways are 4'generallyC, made from organ quality Largebass pipes, customarily longer than Zinc ©200 6 PIPES & SUPPLIES 9-

' 139 138 137 136 135 134 133 132 131 130 129 128

2.5 2.6 2.7 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.9 4.0

1/16 ' 127 126 125 124 123 122 121 120 119 118 117 116

4.2 4.4 4.6 4.8 5.0 5.2 5.5 5.7 6.0 6.3 6.5 6.8

1/8 ' 115 114 113 112 111 110 109 108 107 106 105 104

7.1 7.4 7.8 8.1 8.5 8.8 9.3 9.7 11.0 11.5 10.1 10.5

1/4 ' 103 102 101 100 99 98 97 96 95 94 93 92

14.3 14.9 17.8 16.3 16.9 18.6 19.3 15.6 12.0 13.1 13.7 12.6

8. The 17th halving or Normalmensur Normalmensur or halving 17th The 8. nserts 91 90 89 88 87 86 85 84 83 82 81 80

√ 4 1/2 '

31.3 24.1 21.1 27.4 32.6 20.2 29.9 25.2 22.1 23.1 26.3 28.7

Mouth I Mouth copper or zinc for inserts mouth soldered-in The metal, Common lead. antimonial are pipes for options are lips tin 75% or metal, spotted polished and copper Polished reasons. visual and upper tin 75% with furnished are pipes zinc lips. lower 79 78 77 76 75 74 73 72 71 70 69 68 1 '

37.2 35.6 52.6 42.3 38.8 54.9 34.1 44.2 46.2 48.2 50.4 40.5

8

√ 4 4 67 66 65 64 63 62 61 60 59 58 57 56

2 '

74.4 81.1 71.3 57.4 65.3 62.6 59.9 92.4 77.7 68.2 84.7 88.5

55 54 53 52 51 50 49 48 47 46 45 44 4 S '

L 96.5 AI 114.8 142.6 119.9 105.3 148.9 155.5 100.8 109.9 136.5 125.2 130.7 T

E 43 42 41 40 8 39 38 37 36 35 34 33 32 ' ormalmensur, 1: ormalmensur, D

N O 177.1 162.3 210.6 219.9 193.1 201.6 169.5 261.5 184.9 229.6 239.8 250.4 I

800/458-0289 www.organsupply.com 31 30 29 28 27 26 25 24 23 22 21 20 16 ' UCT

32 R T mm scale mm scale mm scale mm scale mm scale mm scale mm scale mm scale mm scale mm scale 311.0 324.7 273.1 297.8 421.2 339.1 354.1 439.7 285.2 403.2 369.9 386.2

NS 6

caling © 200 B 12 B A# 11 A# A 10 A G# 9 G# G 8 G F# 7 F# F 6 F E 5 E D# 4 D# D 3 D C# 2 C# 1 C

CO S 17th Halving or N or Halving 17th halving ratios are a viable alternative. viable a are ratios halving chart shows the relationship between millimeters and corresponding scale numbers. All starting scales are are scales starting All numbers. scale corresponding and millimeters between relationship the shows chart ratios. other use may strings and Flutes Principals. for normal are ratios halving 17th chart. this on Variable based C-1. of dimension the with begins halving the requested, are 17th than other ratios halving When Scaling of organ pipes or the determination of pipe diameter is based on the 17th pipe being 1/2 the diameter diameter the 1/2 being pipe 17th the on based is diameter pipe of determination the or pipes organ of Scaling 1: Normalmensur, or halving 17th normal called is and #1 pipe of they can be highly polished and lacquered. and polished highly be can they finished in a number of ways; plain so that they they that so plain ways; of number a in finished lacquered flamed and patina, own their develop or pattern, interesting and variegated a them gives Copper great with visually used be can pipes Copper be can pipes Copper range. 8' and 16' the in effect 9- PIPES & SUPPLIES theupper and/or lower lip slightly raised. ofmouth. These styles can also be provided with include:English Bay, Roman, and Triangular styles Thenormal mouth form is Gothic. Other choices pipes,the upper and lower lips are soldered in. arepressed down (flattened). On zinc or copper Theupper and lower lips of organ metal pipes Mouth S toes. the8' and 4' zinc or copper pipes with cast metal pipesare normally furnished with open toes and thesestyles can have open or closed toes. The 16' stylefeet with agreater taper are available. Either of Pipesare provided with standard feet. European Feet tyle w.raspl.o 800/458-0289 www.organsupply.com reasons,special shaped ears are also possible. soundand/or tuning aids. For visual or aesthetic andGedeckts have large ears for stability of basses,box beards are often provided. Rohrflutes speech.For Quintadena pipes or small scale Flute providedbetween the ears to stabilize pipe Onfirst. string pipes, beards or rollers are usually inseveral forms. The normal ear is illustrated Earsare normally provided up to 1' Eand come E themouth width of the pipe. thicknessis substantial and in direct proportion to from45° through 80° are available. Languid Normallanguid bevel is 58°. Other languid bevels Languids

N L ars re s arge O R M A L

B P E EAR C IA L D

BOX ©200 6 PIPES & SUPPLIES 9- o 180 7 4

7 3 o 90

6 2 2

o

5 1 45 Mitering can pipes available, not is height sufficient Where with made are miters 90° 180°. to up mitered be are and cuts four have miters 180° and cuts two practice building organ Good braced. securely of 2/3 than lower no start miter the that suggests Haskell a required, is pipe shorter a If length. body alternative. an is bass stopped or

800/458-0289 www.organsupply.com Used on zinc and organ metal pipes. metal organ and zinc on Used organ metal pipes, slot is cut and rolled in in rolled and cut is slot pipes, metal organ and copper pipes, an organ metal insert is is insert metal organ an pipes, copper and On rolled. and cut is slot which in provided F#. 2/3' to up body pipes facade for suggested only, pipes copper metal insert is provided in zinc and copper and zinc in provided is insert metal rolled. and cut is slot a which in pipes rolled and cut is slot pipes, metal organ On pipe. the of body in directly from 2/3' G up. G 2/3' from reach. of out just be may that are pipes capped smallest The felt. with capped all of tops The paper. with packed scaled pipes, springs are installed to add add to installed are springs pipes, scaled and copper, zinc, on Used tuner. to tension pipes. metal organ provide to domed slightly are flue pipes rigidity and tuning stability. tuning and rigidity 6. Slotted length with track tuner. For zinc and and zinc For tuner. track with length Slotted 6. packed caps larger have pipes metal Capped 7. 5. Slotted length for roll tuning. An organ organ An tuning. roll for length Slotted 5. 2. Cone tuning for organ metal pipes. Normally Normally pipes. metal organ for tuning Cone 2. zinc On pipe. of top from rolled tuner Scroll 3. tuner. cylindrical with length Slotted 4. 1. Dead length with cylindrical tuner. On larger larger On tuner. cylindrical with length Dead 1. 6 © 200 secured to zinc and copper pipes with pop rivets rivets pop with pipes copper and zinc to secured of hooks pipe pipes, metal organ On soldered. and on. soldered are metal same the Pipe Hooks Pipe zinc or copper of made pipes larger on hooks Pipe the hook, D the shapes: three in provided be can are Hooks hook. round the and (standard), hook V

Tuning Methods Tuning flue open for devices tuning of styles basic six are There are: They pipes.

9- PIPES & SUPPLIES havingatrace more string quality. alteredby the internal tube, lengthpipe. The tone is slightly pipeto speak the pitch of afull aninternal tube which allows the essentiallyfractional length with beprovided. These pipes are problem,Haskell pipes can Whereheight and depth is a Haskell Pipes toyour specifications for pipework.any flue specialconstructions is easily accommodated Customizationto provide special scaling and pipeworkAll flue is handcrafted in our plant. Custom Pipe Construction andstandard feet. appropriatehalving ratio, 58° languid bevel, orcaps. All standard pipework employs an down(flattened) mouths and slide tuners lacquer.Spotted metal pipes have pressed orcaps, finished in standard aluminum pipeswith Gothic mouths, slide tuners Standardpipe construction includes zinc S helpfulto the voicer. andany other information that would be instructions,including placement, room size, openor closed toes, chest andtype, voicing pipes,wind pressure, pitch (A=440 Hz), Thisincludes starting scale, material of the requestedon the Metal PipeCheck Sheet. only),or unvoiced. Fill in all information Pipesare provided voiced, pre-voiced (cutup Voicing tandard Pipe Construction

w.raspl.o 800/458-0289 www.organsupply.com 9035.00 9075.02 Whenapipe is to be repaired or missingfrom an incomplete set. replacementpipes for those pipes flue or to provide faithful repairindividual damaged metal Ourpipe shop is equipped to Pipe R tobe repaired or replaced. furnishedafter inspection of pipes canbe obtained. Pricing can be matchfor both scaling and voicing windpressure, so that aproper isessential, along with operating ofthe damaged or missing pipe replaced,the pipe on either side shouldbe furnished. pressureon which it is voiced thelast existing pipe and wind Forbest tonal and scaling match, metal,or 75% tincan be provided. pipesof spotted metal, common slidetuners, are used. Matching spottedmetal pipes, complete with octaves,where possible, stock treble extendedby several notes or several Whenan existing stop is to be Treble Pipes epair ©200 6

PIPES & SUPPLIES 9- #49-61 5 #49-61 8 12 1 5 15 8 12 15

#49-61 #37-48 8 5 8 #37-48 12 15 12 15 5 8 19 12 15 19

#25-36 #37-48 8 #25-36 15 12 12 15 8 22 19 19 15 12 22 19

#13-24 #25-36 12 #13-24 15 19 15 19 12 22 26 22 15 19 22 26

IV Mixture (19-22-26-29) Mixture IV #1-12 (15-19-22-26-29) Mixture V IV Mixture (15-19-22-26) Mixture IV #1-24 15 #1-12 19 22 19 22 15 26 29 26 19 22 26 29 #49-61 8 12 15

#49-61 8 12 15 #37-48 15 12 19

#37-48 12 15 #25-36 #49-61 5 8 #49-61 8 12 12 15 15 15 19 19 22 evoicing No breaks No

800/458-0289 www.organsupply.com

Mixture Compositions Mixture scale, 48 on based are and norms accepted generally follow listed formulas mixture basic The provided. easily are scaling and formulas other with C. 8' at mm Mixtures 130.7 Older flue pipes in good physical condition can often be recycled and revoiced at a savings. savings. a at revoiced and recycled be often can condition physical good in flue pipes Older metal no show manufacture, good of are they provided revoicing for accepted be will Pipes made. are repairs minor and washed are Pipes mishandled. or torn badly not are and fatigue, tonal new with consistent revoiced are pipes and required as installed are slides tuning New instructions. customer and pressure, wind requirements, Flue R Flue #25-48 15 19 #13-24 8 #25-36 12 #25-48 15 12 19 15 19 19 22 22 26

6

© 200 IV Mixture (12-15-19-22) Mixture IV #1-24 19 22 (22-26-29) Mixture III #1-12 12 15 19 III Mixture (19-22-26) Mixture III #1-24 III Mixture (15-19-22) Mixture III #1-24 II Mixture (12-15) Mixture II 15 19 22 22 22 26 26 29 9030.00 9- PIPES & SUPPLIES 20030.00 20020.00 10100.00 10110.00 10200.00 10220.00 10400.00 10800.00 11600.00 30401.00 30403.00 30400.00 30404.00 30402.00 30801.00 30803.00 30800.00 31601.00 31600.00 20050.00 20040.00 20040.00 20040.00 20030.00 20030.00 Metal Flue Pipes Pitch/Stop Principals 4'Spillflöte 16'Gedeckt CappedFlutes II Mixtures 4'Quintadena 4'Rohrflöte 4'Gedeckt/Bourdon III(15-19-22) 16'Quintadena III(19-22-26) 8'Gedeckt/Bourdon III(22-26-29) 8'Rohrflöte IV(12-15-19-22) IV(15-19-22-26) 8'Quintadena IV(19-22-26-29) 4'Koppelflöte V (15-19-22-26-29)V 1' Principal 1-1/3' Quint 2' Fifteenth 2-2/3' Twelfth 4' Octave 8' Principal 16' Principal

(12-15)

30 - 38 42 - 50 64 - 70 56 - 62 NormalScale Range 70 - 76 48@8' 48@8' 48@8' 48@8' 48@8' 48@8' 48@8' 48@8' 38-40 66-68 48-50 56-64 60-62 42-44 54-56 48-52 56-58 Scale 84 77 61

48-52@8' 286 - 202 131-120 202-185 170 - 120 131-110 170-156 101-92 60-55 92-65 92-85 78-71 50 - 39 65 - 50 92 - 71 mm 75 37 27 w.raspl.o 800/458-0289 www.organsupply.com

Mouth Width 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/5 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

20 20

Halving 20 20 20 19 19 18 18 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 Number of Pipes

( 5Koppel Ged.) Zinc 12 12 12 12 12 12 12

©200

6 S.M. 305 122 244 244 244 183 183 183 61 61 61 61 61 49 49 49 49 61 61 61 61 61



PIPES & SUPPLIES 9-

61 61 61 61 61 61 61 49 49 49 61 61 61 61 61 61 61 61 49 49 49 49 49

12 12 12 12 12 12 12 12 12 12

S.M.Zinc No. of Pipes of No.

1/2 1/2 1/3 1/2 1/3 2/3 - 1/2 - 2/3 1/3 - 1/2 - 1/3 2/3 - 1/2 - 2/3 1/3 - 1/2 - 1/3 2/3 - 1/2 - 2/3

17 17 17 18 18 18 18 18 18 18 18 19 19 17 17 17 17 18 18 19 18 18 18 19 17 - 18 - 17

Halving Taper Halving

1/4 1/5 2/9 1/5 2/9 1/4 1/5 1/5 2/9 1/4 2/9 1/5 2/9 1/4 2/9 1/5 2/9 Width Width Mouth Mouth 1/5 - 2/9 - 1/5 1/5 - 2/9 - 1/5 2/9 - 1/4 - 2/9 2/9 - 1/4 - 2/9 1/4 - 2/9 1/5 - 2/9 - 1/5 1/4 - 2/9 2/9 - 1/4 - 2/9

143 202 36 50 71 - 65 - 71 78 - 65 - 78 65 - 55 - 65 65 - 50 - 65 71 - 50 - 71 85 - 78 - 85 92 - 85 - 92 101 - 92 - 101 131 - 110 - 131 85 - 78 - 85 92 - 85 - 92 46 - 42 - 46 46 - 39 - 46 120 - 110 - 120 50 - 46 - 50 50 85 101 - 85 - 101 0 120 - 92 - 120 0 0 143 - 131 - 143 170 - 131 - 170

70 58 38 46 70 78 64 - 70 70 - 64 50 - 52 - 50 62 - 64 - 62 48 - 52 - 48 54 - 56 - 54 64 - 68 - 64 60 - 64 - 60 72 - 74 - 72 72 - 74 - 72 70 - 72 - 70 62 - 70 - 62 56 - 58 - 56 56 - 58 - 56 54 - 58 - 54 42 - 48 - 42 50 - 56 - 50 58 - 60 - 58 58 - 60 - 58 46 - 48 - 46 Normal Scale Range Range Scale Normal

Scale mm

800/458-0289 www.organsupply.com Viola

2' Harmonic Piccolo Harmonic 2' Tierce 1-3/5' 2' Piccolo 2' 1' Sifflöte 1' 4' Harmonic Flute Harmonic 4' 8' 4' Nachthorn 4' 4' String 4' 8' Salicional 8' Strings String 16' Larigot 1-1/3' Open Flutes Open Flute Harmonic 8' 8' Dulciana 8' Gamba 8' 2' Spitzprincipal/flöte 2' 2' Blockflöte 2' 2-2/3' Nazard 2-2/3' 4' Erzähler 4' 4' Gemshorn 4' 4' Spitzprincipal/flöte 4' 4' Blockflöte 4' 8' Erzähler 8' 8' Gemshorn 8' 8' Spitzprincipal/flöte 8' Tapered Stops Tapered Gemshorn 16' Pitch/Stop

6 © 200 60200.00 60200.00 60400.00 60220.00 60400.00 60400.00 60800.00 60400.00 60800.00 60800.00 61600.00 50400.00 50800.00 50800.00 50800.00 51600.00 50800.00 10100.00 10110.00 40200.00 10130.00 40400.00 10200.00 40800.00 10400.00

49 61 61 61 61 61

12 12

17 17 17 17 17 17 17

1/4 1/4 1/4 1/4 1/4 1/4 1/4

27 37 92 - 71 - 92 65 - 50 - 65 50 - 39 - 50 170 - 120 - 170 286 - 202 - 286

77 84 70 - 76 - 70 56 - 62 - 56 64 - 70 - 64 42 - 50 - 42 30 - 38 - 30

16' Principal 16' 8' Principal 8' 4' Octave 4' 2-2/3' Twelfth 2-2/3' Fifteenth 2' Quint 1-1/3' Principal 1' 9- 1 0 PIPES & SUPPLIES block.The windway is cut in the cap. woodpipes in conjunction with sunken Invertedmouths are generally used on open normallycut in the cap. withor aflat level block. The windway is usedon stopped wood pipes in conjunction Standardor English mouths are customarily Mouth S speciesand to custom scales. Woodpipes are available in most wood shellac,brown stain, or to acolor sample. unfinished,or finished clear lacquer, windwaysand caps. They are provided quality,clear poplar with hardwood Woodpipes are constructed from top Materials WOOD P ST ANDARD tyle I P ES INVER TED

w.raspl.o 800/458-0289 www.organsupply.com fortuning. slottedand fitted with awood slide Overlengthopen wood pipes may be topof the pipe and rolled for tuning. ofcommon metal attached across the Tuningopen wood isflutes by apiece stopperhandles. pipesRohrflöte have pierced (drilled) toassist sealing of the stopper. Wood pitch,the leather has afelt backing areleathered. For pipes longer than 4' stopper.Stoppers from 4' and smaller pipes,plywood is employed for the in4' pitch and smaller pipes. For larger handleattached to an end grain stopper Stoppedwood pipes have aturned Tuning Methods ©200 6 11

PIPES & SUPPLIES 9-

56 92.0 99.3 117.4 Scale 111.7 149.7 128.2 51/52 54/55 50/51 44/45 48/49 8' Metal 8' 10 x 11.7 x 10 Comparable 3/8" x 15/32" x 3/8"

3/8" x 11/16" x 3/8" 15 x 20 x 15 10.5 x 13.7 x 10.5 11/16" x 7/8" x 11/16" 14.3 x 17.5 x 14.3 13 x 17 x 13 3/4" x 9/16" 17.5 x 22.2 x 17.5 13/16" x 5/8" 11/16" x 9/16" 49 11/16" x 9/16" 1/2' 61 7/8" x 11/16" 17.5 x 22.2 x 17.5 14.6 x 18.7 x 14.6

16 x 21.5 x 16 5/8" x 7/8" x 5/8" 23 x 30 x 23 25.4 x 19 27/32" x 1-3/32" x 27/32" 1" x 1-1/4" x 1" 25.4 x 31.8 x 25.4 1-3/16" x 15/16" 3/4" x 15/16" x 3/4" 23.5 x 18 3/4" x 1" x 3/4" 37 1' 49 1-1/4" x 1" 31.8 x 25.4 21 x 28 x 21

26 x 35 x 26 1-5/16" x 1-13/16" x 1-5/16" 1-3/4" x 1-15/16" x 1-3/4" 1-3/8" x 1" 37.5 x 48.5 x 37.5 1-13/16" x 1-3/8" 35 x 46 x 35 39.7 x 30.2 1-1/8" x 1-1/2" x 1-1/8" 1-13/16" x 1-9/16" x 1-13/16" 25 x 2" 1-5/8" 38.1 x 28.6 2' 37 50.8 x 41.3 33 x 46 x 33

43 x 57.2 x 43 2-3/16" x 3" x 2-3/16" 63.5 x 79.4 x 63.5 1-13/16" x 2-3/8" x 1-13/16" 2-1/4" x 1-5/8" 2-1/2" x 3-1/8" x 2-1/2" 3" x 2-1/4" 2-11/16" x 2" 50.8 x 68.3 x 50.8 57 x 74 x 57 13 2-13/16" x 3-7/16" x 2-13/16" 87.3 x 71.4 4' 25 46 x 60.3 x 46 55.6 x 76.2 x 55.6

69.8 x 95.3 x 69.8 101.6 x 127 x 101.6 3-3/8" x 4-1/2" x 3-3/8" 85.7 x 114.3 x 85.7 3" x 4" x 3" 3-3/4" x 2-3/4" 8' 1 5-11/16" x 4-3/4" 5" x 4" 4-5/8" x 3-5/8" 4-1/2" x 3-3/8" 13 92.1 x 117.5 x 92.1 76.2 x 101.6 101.6 x 76.2 120.7 x 144.5 x 120.7 85.7 x 114.3 x 85.7

800/458-0289 www.organsupply.com

120.7 x 152.4 x 120.7 177.8 x 215.9 x 177.8 152.4 x 190.5 x 152.4 177.8 x 139.7 127 x 165.1 x 127 5" x 6-1/2" x 5" 6" x 4-3/4" 6" x 7-1/2" x 6" 7" x 5-1/2" 8" x 9-1/2" x 8" 8-1/2" x 7" 16' 1 241.3 x 203.2

6

caling

8' Melodia 8'

Scale

#5 #6 #3 #4 #1 #2

Hohlflöte © 200 S provided. be can scales Special I.D. are Dimensions chart. following the on shown are scales standard All 9-

12 PIPES & SUPPLIES Note Foot Location From Back #1-4 #5-6 #7-8 9235.00 9075.02 toside. Pipefeet locations can be provided per instructions. Dimensionsgiven are from the back of the pipe.Foot is centered side pipemeasured without the cap. Standard foot locations for 16' stopped wood pipes are shown. Placement of feet in wood pipes, when not specified, on 8' and 4' sets, is in the center of the pipesof 8' pitch and smaller. Metaltoe pipe feet, regulated by the size of the hole in the lead toe, are normally furnished on Woodpipes of 32' and 16' pitch have wood toe pipe feet valvewith abutterfly for wind regulation. Feet #9-12

#1&2 4-1/2" 3-1/2" pipesto be repaired or replaced. canbe furnished after inspection of andvoicing can be obtained. Prices thataproper match for both scaling alongwith operating wind pressure, so damagedor missing pipe is essential, replaced,the pipe on either side of the set.When apipe is to be repaired or forthose missing from an incomplete toprovide faithful replacement pipes individualdamaged wood pipes flue or Ourpipe shop is equipped to repair Pipe R shouldbe furnished. andwind pressure on which it is voiced scalingmatch, the last existing pipe tincan be provided. For best tonal and spottedmetal, common metal, or 75% slidetuners, are used. Special pipes of spottedmetal pipes, complete with octaves,where possible, stock treble extendedby several notes or several Whenan existing stop is to be Treble Pipes 4" 4"

#3&4 3-1/2" 3-1/2" epair 4" 3"

3-1/2" 3-1/2" #5 3" 3"

#1&2 1-3/4" 1-3/4" 1-1/2" 2"

#3&4 ToeI.D. 1-3/4" 1-1/2" 1-1/2" 1-1/4" w.raspl.o 800/458-0289 www.organsupply.com 9230.00

1-1/2" 1-1/2" 1-1/4" 1-1/4" #5

customerinstructions. requirements,wind pressure, and revoicedconsistent with new tonal repackedas required and pipes are repairsare made. The stoppers are Pipesare washed and minor notbadly mutilated or mishandled. areof good manufacture, and are acceptedfor revoicing provided pipes revoicedat asavings. Pipes will be conditioncan often be recycled and Olderwood pipes in good physical Flue R

evoicing ©200 6 13

PIPES & SUPPLIES 9-

24 24 12 12 12 12 12 12 12 12 38 S.M.

61 61 61 37 37 42 12 12 12 12 12 12 12 49 49 49 49 49 49 49 49 Wood

of Number

61 61 61 61 41 52 52 52 52 27 21 43 33 45 56 39 54 36 48 50 60 Metal Sc Metal

79 73 73 92 73 73 99 117 178 118 118 118 118 163 192 327 221 426 150 128 250 mm Metal Ø Metal

45x108 56 x 76 x 56 56 x 76 x 56 70 x 95 x 70 56 x 73 x 56 56 x 73 x 56 76 x 102 x 76 I.D. mm I.D. 92 x 118 x 92 86 x 114 x 86 86 x 114 x 86 86 x 114 x 86 86 x 114 x 86 178 x 216 x 178 140 x 178 x 140 121 x 145 x 121 152 x 191 x 152 102 x 127 x 102 127 x 165 x 127 203 x 241 x 203 330 x 432 x 330 254 x 330 x 254

3" x 4" x 3" 4" x 5" x 4" 13" x 17" x 13" 10" x 13" x 10" 7" x 8-1/2" x 7" 7-1/2" x 6" 5-1/2" x 7" x 5-1/2" 5" x 6-1/2" x 5" 8" x 9-1/2" x 8" I.D. Inches I.D. 2-3/16" x 3" x 2-3/16" 2-3/16" x 3" x 2-3/16" 2-3/16" x 3" x 2-3/16" 2-3/16" x 3" x 2-3/16" 3-3/8" x 4-1/2" x 3-3/8" 2-3/4" x 3-3/4" x 2-3/4" 3-5/8" x 4-5/8" x 3-5/8" 3-3/8" x 4-1/2" x 3-3/8" 3-3/8" x 4-1/2" x 3-3/8" 3-3/8" x 4-1/2" x 3-3/8" 1-3/4” x 4-1/4” x 1-3/4” 4-3/4" x 5-11/16" x 4-3/4"

#3 #3 #4 #6 #5 #3 #2 #1 #4 #2 #3 #4 #5 #4 #1 #3 #3 #4 #1 #4 #1 Scale #1-24 Open Wood, #25-49 Harmonic Wood, #50-61 Harmonic Metal Harmonic #50-61 Wood, Harmonic #25-49 Wood, Open #1-24 #1-12 Stopped Wood, #13-36 Open Wood, #37-61 Harmonic Wood Harmonic #37-61 Wood, Open #13-36 Wood, Stopped #1-12 #1-49 Stopped Wood, #50-61 Open Metal Open #50-61 Wood, Stopped #1-49 Metal Open #38-61 Wood, Stopped #1-37 Pipes) S.M (Double #43-61 Wood, Open #13-42 Wood, Stopped #1-12 Metal Open #38-61 Stoppers, Pierced with Wood Stopped #1-37 Wood Open #13-61 Wood, Stopped #1-12 Metal Open #50-61 Wood, Open #1-49

800/458-0289 www.organsupply.com 4' Harmonic Flute Harmonic 4' 4' Melodia 4' 8' Gedeckt 8' Gedeckt 4' Ludwigtone 8’ Rohrflöte 4' Melodia/Hohlflöte 8' Melodia/Hohlflöte 4' Flute Harmonic 8' 4' Harmonic Flute Harmonic 4'

8' Harmonic Flute Harmonic 8'

8' Gedeckt 8'

8' Hohlflöte 8' 16' Bourdon 16' 4' Rohrflöte 4' 8' Melodia 8' 16' Wood Open Wood 16' For 8' or 4' ranks an additional octave of wood treble pipes can be supplied. be can pipes treble wood of octave additional an ranks 4' or 8' For d'Amour Flute 4' Ludwigtone 8’ Pipes Pitch/Stop 32' Bourdon 32' 6 © 200 Wood Pipes Wood 70402.00 70802.00 70401.00 70801.00 70801.00 70403.00 70403.00 70805.00 70800.00 71604.00 71600.00 73200.00 9-

14 PIPES & SUPPLIES antimoniallead can be used in place of spotted metal. fromzinc with spotted metal tuner inserts. Spotted metal bells can be provided. Common metal or spottedmetal resonators can be provided for 8' and 1/2L 16' reeds. Full length 16' Oboesoctaves are traditionally are made of two piece construction with spotted metal bells and zinc stems. Full length Reedpipes are built from spotted metal (50% tin). Resonators longer than 2' Con Trumpets and Materials REE D P I P ES w.raspl.o 800/458-0289 www.organsupply.com ©200 6 15

PIPES & SUPPLIES 9-

Domed Cap ˚ 45 Parallel ˚ Posaune erman erman 1

G ˚ Large Large

˚ thickness determined by wind pressure pressure wind by determined thickness sound. of type and of octaves 8' and 16' all on Provided fitted to block and shallot. and block to fitted appropriate of brass, reed from Cut maximum stability. maximum individually and maple rock from Made bronze, tightly formed to provide provide to formed tightly bronze, All reed blocks are stepped style for style stepped are blocks reed All shallot. of support added phosphor temper spring from Made provide maximum stability and support support and stability maximum provide resonator. and block reed of of service. of toes lead with boots zinc Tapered full length and 16' 1/2 L reeds for ease ease for reeds L 1/2 16' and length full hallots ssembly Tapered 3 Tapered

mall mall

S Tapered 3 Tapered eed S eed Ferrules: Tongues: Wedges:

Blocks: R for tubing brass from made are shallots Reed sheet brass formed or shallots, parallel or French leathered be can faces Shallot shallots. other for (7) Seven required. is tone smoother a where illustrated. are types different A Base Wires:

Boots: (Sockets)

hapes 800/458-0289 www.organsupply.com 6 esonator Length esonator esonator S esonator © 200 1' F#, note #43 giving significant support to the the to support significant giving #43 note F#, 1' purpose Special solos. Trumpet of notes higher #31 or #19 at break will family Tuba the in reeds specifications. your to or of the treble range of chorus reeds. They are are They reeds. chorus of range treble the of pressure. wind higher and 3" on recommended at occurs resonators harmonic to break Normal Harmonic length resonators (double length) are are length) (double resonators length Harmonic overtones fundamental the strenghten to employed full length at #13. Many times a break at #7, 18 or or 18 #7, at break a times Many #13. at length full tonal the disguising in successful more be can 20 constructions. two the in differences Oboe stops. 1/2L basses are not recommended recommended not are basses 1/2L stops. Oboe the in reeds bodied full or dark predominantly for cases, most In class. Tuba or Tromba, Trombone, to break the with #1-12 from run will bass 1/2L a or mitered full length bass is not practical, 1/2L 1/2L practical, not is bass length full mitered or reeds chorus brighter for option an are resonators and Fagotto Posaune, Trompette, Trumpet, as such Full length reed resonators in the 16' and 8' octaves octaves 8' and 16' the in resonators reed length Full of development complete for preferable always are length full a When color. and weight, tonal sound, R tone color. The following proportioned drawings drawings proportioned following The color. tone reeds. standard of shapes the illustrate R effect great a has resonator reed the of shape The of type the and harmonics of development the on 9-

16 PIPES & SUPPLIES E forPosthorns. telescopictubing at the block are provided pipes.Adjustable length resonators with Tuningcaps are used for Vox Humana Krummhorn,and Rohr Schalmey family. forcylindrical reeds of the Clarinet, andTrumpets. Slide tuners are provided Rolltuners are cut into the bells of Oboes Tuners your trust. createafinished reed product worthy of voicer.We work together with you to theinstrument that would be helpful to the roomsize, and any other information about voicinginstructions, including placement, pressure,pitch, shallot style, chest type and startingscale, material of the pipes, wind theReed PipeCheck Sheet. This includes requirements.Fill in all information on areprovided voiced to your particular qualityof the reed stops. All reed pipes isultimately judged by the color and OSIis acutely aware that the organ Voicing visuallyeffective for en Chamade reeds. polishedor aluminum lacquered zinc are Brushed,or flamed, polished copper or n Chamade Pipes

w.raspl.o 800/458-0289 www.organsupply.com 9135.00 9075.02 9130.00

fatigue,and are not badly torn or goodmanufacture, show no metal forrevoicing provided pipes are of asavings. Reed pipes will be accepted canoften be recycled and revoiced at Olderreeds in good physical condition R recommended. shallotstyles (taper to parallel) is not andcustomer instructions. Changing tonalrequirements, wind pressure, tonguesprovided consistent with new wiresare replaced as required and new minorrepairs are made. The tuning mishandled.Pipes are washed and voicedshould be furnished. pipeand wind pressure on which it is andscaling match, the last existing tincan be provided. For best tonal spottedmetal, common metal, or 75% slidetuners, are used. Special pipes of spottedmetal pipes, complete with octaves,where possible, stock treble extendedby several notes or several Whenan existing stop is to be Treble Pipes Pipe R pipesto be repaired or replaced. canbe furnished after inspection of andvoicing can be obtained. Prices thataproper match for both scaling alongwith operating wind pressure, so damagedor missing pipe is essential, replaced,the pipe on either side of the set.When apipe is to be repaired or forthose missing from an incomplete providefaithful replacement pipes individualdamaged reed pipes or to Ourpipe shop is equipped to repair eed R epair evoicing ©200 6 17

PIPES & SUPPLIES 9-

24 24 24 24 12 12 12 12 12 12 12 12 12 Flues 12 - 7 - 12 24 -19 24 12 - 7 - 12

37 37 37 37 49 49 49 49 49 49 49 49 49 Reeds Reeds 37 - 42 - 37 49 - 54 - 49 49 - 54 - 49 Number of Pipes of Number

12 12 12 12 12 Zinc

70 57 32 45 92 89 38 38 64 114 127 121 127 mm 76 - 127 - 76 56 - 98 - 56 38 - 51 - 38 25 - 32 - 25 33 - 38 - 33 114 - 203 - 114 0 102 - 152 - 102

Normal Scale Range Range Scale Normal

5" 5" Scale Scale SPEC 3" - 5" - 3" 4" - 6" - 4" 2-1/4" 1-3/4" 2-3/4" 4-3/4" 3-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/4" 2-1/2" 3-5/8" 4-1/2" 4-1/2" - 8" - 4-1/2" 1-1/2" - 2" - 1-1/2" 1" - 1-1/4" - 1"

1-5/16" - 1-1/2" - 1-5/16" 2-3/16" - 3-7/8" - 2-3/16"

800/458-0289 www.organsupply.com eed Pipes eed 8' Trumpet 8' 16' Trumpet 16' 1/2L Trumpet 16' 4' Oboe/Hautbois 4' Oboe Capped 8' Oboe Capped 4' Horn French 8' Anglais Cor 8' Horn English 8' 8' Oboe/Hautbois 8'

Pitch/Stop 8' Vox Humana Vox 8' 8' Rohr Schalmey Rohr 8' Schalmey Rohr 4' 8' Post Horn (Gottfried) Horn Post 8' Clarinet 16' Clarinet 8' Clarinet 4' 4' Clarion 4' 16' Fagotto/Oboe 16' 1/2L Fagotto/Oboe 16' 8' Krummhorn 8' R 6 © 200 80808.00 80805.00 80405.00 80403.00 80804.00 80809.00 81603.00 80803.00 80807.00 80807.00 80806.00 80802.00 80402.00 80801.00 80401.00 81601.00 81601.00 80800.00 80400.00 81600.00 81600.00 9-

18 PIPES & SUPPLIES 9076.32 9076.31 9076.30 9076.29 9076.28 9076.27 9076.26 9076.25 9076.24 9076.23 9076.22 9076.21 9076.20 9076.19 9076.18 9076.17 9076.16 9076.15 9076.14 9076.13 9076.12 9076.11 9076.10 9076.09 9076.08 9076.07 9076.06 9076.05 9076.04 9076.03 9076.02 9076.01 9076.00 9075.99 9075.98 9075.97 9075.96 9075.95 9075.94 9075.93 9075.92 19.3mm I.D. 180mm foot length. furnishedwith slide tuners, unvoiced. arespotted metal with a1/4 mouth and trebleextensions for existing stops. They ofmissing or damaged pipes and as Stocktreble pipes are used for replacement S 18.6mm 16.9mm 17.8mm 16.3mm 12.6mm 13.1mm 13.7mm 14.3mm 14.9mm 15.6mm 12.0mm 11.5mm 11.0mm 10.5mm 10.1mm 9.7mm 9.3mm 8.8mm 8.5mm 8.1mm 7.8mm 7.4mm 7.1mm 6.8mm 6.5mm 6.3mm 6.0mm 5.7mm 5.5mm 5.2mm 5.0mm 4.8mm 4.6mm 4.4mm 4.2mm 4.0mm 3.9mm 3.7mm 3.6mm 3.4mm tock Treble Pipes

BodyLength 150mm 150mm 150mm 150mm 150mm 150mm 150mm 150mm 150mm 150mm 150mm 150mm 125mm 125mm 125mm 125mm 125mm 125mm 100mm 100mm 100mm 100mm 100mm 100mm 85mm 85mm 85mm 85mm 85mm 85mm 75mm 75mm 75mm 75mm 75mm 75mm 75mm 65mm 65mm 65mm 65mm

Max.Pitch 1/2'-C 1/2'-D 1/2'-F# 1/2'-A 1/4'-C 1/4'-D#

w.raspl.o 800/458-0289 www.organsupply.com 9080.74 9080.62 9080.50 9004.00 9003.00 9002.00 9001.00 #74-85 #62-73 #50-61 samples. #56-85.Pipes provided voiced to your cappedmetal #50-55 and open from inAntimonial lead. These pipes are for10” and 15” scale 8’ Tibia available WurliTzer™replacement treble pipes Pipes WurliTzer™ Tibia Treble aeil Form GumArabic Material Pipe Making S StearineCandles PipeSizing Recipe Whiting

upplies Candle Powder Powder ©200

6 9 1

PIPES & SUPPLIES 9-

Pitch/ 16'-6 6 8'-8 8 8 8 8 9

4” 4" Length Length Amount 10-3/4" 9" 7-1/4" 6-1/2" 6-1/4" 5-3/4" 5-1/2" O.A. 4-1/4"

15 14 Ga. 8 9 10 11 11 12 12 13 Wire

hallots .055 .064 Size .129 .114 .102 .091 .091 .080 .080 .071 Wire Wire

eed Tuning Wire Tuning eed S eed eed Tongues eed

11 Size 2 3 4 5 6 7 8 9 10 Description scale small - French 8' R wire. bronze Phosphor wire tuning reed Custom R 16' Tapered - large scale large - Tapered 16' scale large - Tapered 8' scale small - French 16' 16' Tapered - small scale small - Tapered 16' scale small - Tapered 8' 16' Reed tongues, unpolished tongues, Reed 16' unpolished tongues, Reed 8' R your to furnished are tongues Reed unpolished. thickness, and dimensions

9102.02 9102.03 9102.04 9102.05 9102.06 9102.07 9102.08 9102.09 9102.10 9102.11 9102.20 9175.00 9176.00 9150.00 9151.00 9155.00 9156.00 9160.00 9161.00

9 8 8 8 8'-8 8 16'-6 6 Amount Pitch/

9 8 7 6 5 4 2 3 Size Size

Wall Heavy Heavy Heavy Heavy Heavy Heavy Heavy Heavy Light Light Light Light Light Light Light Light

1/8" 3/16" 1/8" Ø

Boot 9103.03 9103.04 9103.05 9103.06 9103.07 9103.08 9103.09 9103.02

800/458-0289 www.organsupply.com older 75/25 63/37 63/37 Cast Toe Points Toe Cast O.D. Pure tin and lead are alloyed to provide provide to alloyed are lead and tin Pure Candle Stearine Use fluxsolder. free pound. the by flux. Sold for 9004.00 Composition S 2-1/16" 1-7/8" 1-13/16" 1-3/4" 1-11/16" 1-5/8" 1-3/8" 1-9/16" 1-3/8" 1-3/16" 1-1/16" 15/16" 2-1/4" 7/8" 13/16" 3/4" Wedge 9101.06 9101.07 9101.08 9101.09 9101.02 9101.03 9101.04 9101.05

6 6 eed Pipe Parts Pipe eed © 200 9055.17 9055.18 9055.13 9055.14 9055.15 9055.16 9055.11 9055.12 9050.06 9050.07 9050.08 9050.03 9050.04 9050.05 9050.01 9050.02 9010.01 9010.02 9010.03 Block

R

9100.08 9100.09 9100.05 9100.0 9100.07 9100.02 9100.03 9100.04 9- 2

0 PIPES & SUPPLIES 9202.14 9202.13 9202.12 9202.11 9202.10 9200.99 9200.18 9200.17 9200.16 9200.15 9200.14 9200.13 9200.12 9200.11 9200.10 9210.10 9210.09 9210.08 9210.07 9210.06 9205.99 9205.11 9205.10 9205.09 9205.08 9205.07 9205.06 9205.05 9205.04 9205.03 9205.02 9205.01 1- 1-1/ yellowshellac. Special length pipe feet custom made. 6"or 18" long valves.with butterfly 1" Tenon. Finished Wood Toe Pipe Feet 1" 1-1/4" 2” I.D. 1" 1-1/4" 1-3/4" 1-1/2" 2" 2-1/4" 2-1/2" 2-3/4" 3" SpecialWood Toe PipeFeet 1/4" 3/16" woodfeet. Finished yellow shellac. Special length pipe feet custom made. Metaltoe pipe feet 6" or 18" long. 3/4" Tenon. Lead toes are cast on Metal Toe Pipe Feet 5/16" I.D. 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1" 7/8" 3/4" 5/8" 1/2" SpecialMetal Toe PipeFeet 3

/4"

2

"

7/16" 3/8" 1/2" TenonO.D. 9/16" 5/8" 11/16" 7/8" 1" 1-3/16" 1-3/8" 1-5/8" 1-3/8" 1-3/16" 1" 7/8" 11/16" 1- 1-3/8" 1-11/16" 2-3/8” 2-1 TenonO.D. 1-3/8" 1-5/8" 2-1/4" 2" 2-1/2" 2-3/4" 3" 3-1/2" 3-1/4"

7

/ /

8 8

" "

18" 18" 18” 18" 18" Length 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" Length 6" 6" 6" 6" 6" 6" 6" 6" 18" 18" 18" 18" 18"

Scale#1-2 4 4 4 5/8" 9/16" 11/16" RackboardØ 3/4" 13/16" 7/8" 1-1/8" 1-1/4" 1-7/16" 1-5/8" 1-7/8" 1-5/8" 1-7/16" 1-1/4" 1-1/8" 7/8"

w.raspl.o 800/458-0289 www.organsupply.com

Used for 16'

Scale#3-4

4 4 4

5 4 Scale#1-4 4 6 6 6 6 6 6

Scale#5

6 6

Usedfor 8'

9 4 Scale#5-6 6 6 6 6 6 6

©200 6

21

PIPES & SUPPLIES 9-

Sc

6 6 6 6 6 6 6 6 6 6 6 D Used For Sc #2-5 C

8’ 6 6

3/16" 3/16" 1/4" 3/8" 1/2" 5/8" 3/4" 3/4" 7/8" 7/8" 1" 1"

B

1/2" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/8" 1-1/4" 1-1/4" 1-1/2" 1-1/2"

topper Handles topper 2-3/16" 1-5/8" 2-11/16" 3-1/4" 3-3/4" 4-1/4" 5-1/4" 4-3/4" 5-7/8" 6-3/8" 6-7/8" 7-3/8" A

800/458-0289 www.organsupply.com

5/16" 5/16" 3/8" 1/2" 11/16" 7/8" 1-1/8" 1" 1-5/16" 1-5/16" 1-1/2" 1-1/2" Unfinished hardwood, available in 12 sizes. For new or or new For sizes. 12 in available hardwood, Unfinished work. replacement A B C D #1 S Wood 1 lb. can lb. 1 Tallow lubricating for used fat lamb Rendered stoppers. pipe wood can lb. 1/2 6 © 200 9220.11 9220.12 9220.08 9220.09 9220.10 9220.05 9220.06 9220.07 9220.01 9220.02 9220.03 9220.04 9250.01 9250.02 9- 22 PIPES & SUPPLIES 9330.00 9320.00 9310.00 CustomSlide Tuners Aluminum CokeTin youruse. Aslide tuner order form is available for tensionsprings. and8' octaves are available with coil lengthtuners are custom-made. 16' length.Tapered slide tuners and extra pipe.Specify dead length or slotted lengthand at the languid for each “C” pipesrequire the diameter at tuning Custommade slide tuners for tapered mustbe individually fitto pipes Allslide tuners are carefully rolled, but tuningslides are made with overlap. twotimes the diameter. Standard Standardtuner length is approximately forharmonic pipes and mixtures. toolfor this operation. Indicate breaks 8090.00PipeScale Ruler is ahandy ofall “C” pipes for the best The fit. orscale numbers and provide diameter startingpipe I.D. in inches, millimeters pitch,give number of tuners, the Pleaseprovide stop name and starting providedunless otherwise specified. or17th halving. Coke tinwill be tunersare made using Normalmensur Stockcoke tinor aluminum slide S lide Tuners w.raspl.o 800/458-0289 www.organsupply.com 9900.00 9800.00 9600.00 9500.00 9400.00 9300.32 9300.25 9300.20 9300.16 9300.12 9300.10 9301.20 9301.15 9301.10 9301.08 .020" .015" .010" .020" .016" Thickness Thickness .008" CokeTin .025" .012" .010" .032" Aluminum S Zinc Antimoniallead 75%Tin 75/25 Spottedmetal 50/50 Commonmetal 35/65 Organ Pipe Metal Material peryour specifications. soldby the pound. Custom cut metal from11 ga. to 18 ga. All pipe metals Zincis 27" wide by coil and is available partialsheet. Sheet size is 31" x96". .015"to .050" is available by the full or Castand planed organ pipe metal from lide Tuner S

24"x30" 24"x30" 24"x30" 24"x36" 24"x36" SheetSize SheetSize Approximate 24"x30" 12"x24" 12"x24" 24"x36" 24"x36"

tock

©200 37-41 33-36 59-67 77-85 80-85 86-109 110-up 67-76 Scales Suggested Scales Suggested

55 56-66 6