Fine garden ornaments and architectural stonework

Haddonstone Ltd, The Forge House, East Haddon, Northampton NN6 8DB, England. Telephone: 01604 770711 Fax: 01604 770027 [email protected]

Haddonstone (USA) Ltd, Telephone: 856 931 7011 Fax: 856 931 0040 [email protected]

Haddonstone (USA) Ltd, 32207 United Avenue, Pueblo, CO 81001, USA. Telephone: 719 948 4554 Fax: 719 948 4285 [email protected] www.haddonstone.com Fine garden ornaments and architectural stonework

ISBN: 978-0-9563891-2-1 Issue date: January 2015 122 ARCHITECTURAL STONEWORK

The standard range of designs in Haddonstone’s Inspirations 124 Collection offers architects and designers the Balustrades 136 opportunity to use architectural components true in Parapet Screening 146 spirit to the orders of classical architecture. In most Gate Piers 147 circumstances the standard range of designs will Pier Caps 148 satisfy the architect’s requirements. Where it cannot, Copings & Cappings 150 Haddonstone can and do produce custom-made Columns & Pilasters 152 designs to order, as can be seen from the Porticos & Door Surrounds 154 Inspirations images on the following pages. Belvedere 161 Orangeries 162

“Classical architecture is dignified; it is capable of Pavilions 164 magnificence as well as humility. It can, by the use of its Temples & Temple Flooring 166 mouldings and vocabulary, express an infinite variety of Pergola 168 moods and conditions of man whether it be national, social Ruins, Follies & Grottoes 170 or historical. It is the expression of civilised man where every Heads, Cills & Keystones 172 person is different.” Window Surrounds 173 Quinlan Terry, 1968 Plinths, String Courses & Details 174 Brackets, Corbels & Quoins 175 Roundels & Plaques 176 Cladding & Rain Screen Cladding 177 Flooring, Paving & Steps 178 TecLite 182

123 ARCHITECTURAL STONEWORK inspirations

With imagination and inspiration, architects and designers can use Haddonstone designs to great effect in a variety of commercial and residential projects, as can be seen by studying the following pages.

Each project has been achieved by using either standard Haddonstone components or custom-made designs created by utilising the company’s skilled craftsmen and extensive mould-making facilities. Within reason, the only constraint is your imagination...

Substantial extensions to Malvern College feature custom designs sympathetic to the architectural style of the original buildings.

This imposing neo-classical residence incorporates a Haddonstone portico, pediment and garden ornament. 124 125 Custom cladding at Brick Lane Mosque, London.

London’s Whittington Hospital The dramatic entranceway to The Rutherford Centre for the Performing Arts at Wimbledon High School utilises features Haddonstone detailing. custom cladding from Haddonstone. 126 ARCHITECTURAL STONEWORK inspirations

Hospital in Japan makes extensive use of custom and standard Haddonstone. Façade stonework at Longborough Festival Opera, Gloucestershire. Client: Mito Golf. Design and Build Contractor: Shimizu Corporation Japan’s Mito Golf Clubhouse features balustrading, columns and window Dramatic portico and balustraded balcony in Leicestershire. surrounds by Haddonstone. 127 ARCHITECTURAL STONEWORK inspirations

Custom façades at the Marshes Shopping Centre, Dundalk, Ireland. Magnificent Surrey residence fully utilising both standard and custom designs. Architects: WRD & RT Taggart Client: McLaughlin Harvey Surveying: Hughes McMichael

128 Haddonstone has been used extensively in the building and landscape at Coworth Park, Dorchester Collection’s luxury country house hotel and spa in Berkshire.

129 Haddonstone columns, entablature and plinths combine to great effect with natural granite at The Academy Shopping Centre, Aberdeen.

This stunning property in Leicestershire combines standard and custom-made architectural stonework in Haddonstone, TecLite and TecStone. Developer: Alpha Homes

130 ARCHITECTURAL STONEWORK inspirations

Custom entrances created for Camberley’s Main Square shopping area. Unique Orangery at Thamesfield Nursing Home, Henley-on-Thames. Design & Build: Simon Barnett.

Bespoke gate piers at Swinfen Hall Hotel in Staffordshire.

This inspirational Surrey home makes full use of Haddonstone’s capabilities - from collonaded entrance portico and balustraded parapet to window surrounds and band courses.

131 ARCHITECTURAL STONEWORK inspirations

Development in Berkshire featuring a wide range of Haddonstone designs. Spectacular private residence in Middlesex incorporating custom portico. Architects: Robert H Robertson & Associates Haddonstone’s standard and custom-made stonework in Bedfordshire. Omni Shoreham Hotel in Washington DC features Haddonstone designs.

Private house in Staffordshire incorporating window and door surrounds. Custom and standard designs combine at this Ohio residence.

132 A private residence in West Yorkshire featuring a curved Haddonstone portico with balustraded balcony and a Mount Edgcumbe Finial in the foreground.

Langdale Chase Hotel in Cumbria contrasts local stone with Haddonstone. Stonework installation: Les Simblet. Extension to St Mary’s Church, Loughton, Essex incorporating slender Haddonstone supplied the bay window and TecLite quoins, strings and custom columns with dramatic effect. cladding panels for this development in Leicester. 133 Significant Surrey residence incorporating Haddonstone extensively. The entrance to the Atlantic Hotel, Jersey features Haddonstone columns.

London residence transformed by incorporating Haddonstone architectural features including custom portico, window heads and cills, quoins, copings and balls.

134 ARCHITECTURAL STONEWORK inspirations Architec t/ Designer: Sampson Associates The Castle public house, Woodford Green, Essex was transformed by the imaginative use of stonework - including columns, parapet screening, statuary, finials, door surrounds, chimney pieces and a Venetian Folly façade. Original Design: Michael Rosenauer, Tonnet & Associates The Sheraton Heathrow Hotel features Haddonstone balustrade. Client: Ragdale Hall Health Hydro, Leicestershire. Stylish jacuzzi featuring Haddonstone Columns and entablature at a prestige Haddonstone can be painted and gilded to great effect, as seen at this grand Health Hydro in Leicestershire. residence in Northamptonshire. 135 ARCHITECTURAL STONEWORK BALUSTRADES

There are four types of balustrade: The Standard The 1100 The Kensington The Spiral Range Balustrade Balustrade (USA only) Balustrade

Illustrated on pages 137, 138 and Shown on page 140, this is a Shown on page 140, this Shown on page 141, the 139, the standard range is available heavier balustrade designed is an imposing balustrade of Spiral Balustrade is available in six styles: Flat, Part-Weathered to comply with the Building handsome proportions. only with flat rail, K533G-style or Weathered, each available to Regulation height of 1100mm baluster, standard style of plinth 5 It comprises weathered rail, suit central or side run-in situations, (43 ⁄16”) required in certain and optional T920 style of with a choice of standard balusters. instances. It comprises a upper and lower plinths, under-coping to the radii and If balustrades are to be used as weathered rail, weathered plinth, Regency-style K610B square falls indicated. a parapet wall or a raised terrace Georgian-style baluster and balusters and rectangular piers. edge, we have several optional rectangular pier. The plinth moulding is used to under-copings that can be used frame the inset panel of the pier below plinth course to increase the shaft. height of the balustrade, or to cope a substructure.

136 The Standard Range The Standard Range Style FC: Flat Central Run-in Style FS: Flat Side Run-in

See page 144 for balusters. See page 144 for balusters.

TS Tech Sheet No.B10 & B70 TS Tech Sheet No. B15 & B70

Plans below show Pier Caps. Plans below show Pier Caps. For component weights see page 143 For component weights see page 143.

3 350 (13 ⁄4") 350 (133⁄4")

135° 135°

713 137 K130A K140A 377 (14(14 ⁄8⁄")16”) K150A K250A K260A K270A 377377 (14 (14 ⁄⁄168")”)

5 194 (7 ⁄8") 194 (75⁄8")

K280A K290A K300A

FC style with K533G Balusters / T930 Under Copings FS style with K533G Balusters / T925 Under Copings

137 1 713 1 377 (14(14 ⁄8⁄16")”) 230 (9 ⁄16") 377 (14(14 ⁄8⁄16")”) 230 (9 ⁄16")

3 T110A RAIL 86 (33⁄8") T110A RAIL 86 (3 ⁄8")

T900A PLINTH 102 (4") T900A PLINTH 102 (4") Standard length of rail/plinth supplied Standard length of rail/plinth supplied 1 7 1 1 7 337 (13 ⁄4") 900mm (35 ⁄16") 279 (11") 190 (7 ⁄2") 337 (13 ⁄4") 900mm (35 ⁄16") 279 (11") 190 (71⁄2")

137 137 377377 (14(14 ⁄8⁄16")”) 377377 (14(14 ⁄8⁄16")”)

230 7 137 K100A K110A K120A 377 (1413⁄8") K200A K210A K220A 377 (14 ⁄816") (91⁄16") 377 (14 ⁄16”) 377 (14 ⁄ ”)

K170A K160A K230A K240A

230 (91⁄16")

Free-standing

Custom-made products are available on request. 137 The Standard Range The Standard Range Style PC: Part-Weathered Central Run-in Style PS: Part-Weathered Side Run-in

See page 144 for balusters. See page 144 for balusters.

TS Tech Sheet No.B20 TS Tech Sheet No. B25

Plans below show Pier Caps. Plans below show Pier Caps. For component weights see page 143. For component weights see page 143.

137 3 377377 (14 (14 ⁄⁄816")”) 350 (13 ⁄4")

230 135° 713 713 K110C 1 K120C 377 (14(14 ⁄8⁄")16”) K250C K260C K270C 8 16 (9 ⁄16") 377 (14(14 ⁄ ⁄")”)

194 (75⁄8")

K170C K160C K100C K280C K290C K300C

Free-standing

PC style with K457G Balusters / Q560 Plinth (custom piers) PS style with K533G Balusters

137 1 137 377377 (14 (14 ⁄8⁄16")”) 230 ⁄16") 377377 (14 (14 ⁄8⁄16")”) 230 (91⁄16") 254 (10") 254 (10")

1 1 T120A RAIL 105 (4 ⁄8") T120A RAIL 105 (4 ⁄8")

T900A PLINTH 102 (4") T900A PLINTH 102 (4") Standard length of rail/plinth supplied Standard length of rail/plinth supplied 1 7 1 1 7 337 (13 ⁄4") 900mm (35 ⁄16") 279 (11") 190 (7 ⁄2") 337 (13 ⁄4") 900mm (35 ⁄16") 279 (11") 190 (71⁄2")

3 137 (13 ⁄4") 377(14377 (14 ⁄168")”)

135° 713 137 K130C K140C 377 (1(144 ⁄8")⁄16”) K150C K200C K210C K220C 377(14377 (14 ⁄8⁄16")”)

194 (75⁄8")

230 (91⁄16") K230C K240C

138 Custom-made products are available on request. The Standard Range The Standard Range Style WC: Weathered Central Run-in Style WS: Weathered Side Run-in

See page 144 for balusters. See page 144 for balusters.

TS Tech Sheet No.B35 TS Tech Sheet No. B35

Plans below show Pier Caps. Plans below show Pier Caps. For component weights see page 143. For component weights see page 143.

WC style with K610G Balusters WS style with K533G Balusters

713 713 1 377377 (14 (14 ⁄8⁄16")”) 230 (91⁄16") 377377 (14(14 ⁄8⁄16")”) 230 (9 ⁄16")

1 T120A RAIL 105 (41⁄8") T120A RAIL 105 (4 ⁄8")

T900A PLINTH 102 (4") T900A PLINTH 102 (4") Standard length of rail/plinth supplied 1 7 Standard length of rail/plinth supplied 337 (13 ⁄4") 16 279 (11") 1 2 900mm (35 ⁄ ") 190 (7 ⁄ ") 1 7 337 (13 ⁄4") 900mm (35 ⁄16") 279 (11") 190 (71⁄2")

713 377 (1(144 ⁄8⁄")16”)

713 377377 (14(14 ⁄8⁄")16”) K100D K110D K200DK210D K220D

137 377377 (14 (14 ⁄⁄816")”) Free-standing

230 (91⁄16") 230 13 377 (1(1447⁄8⁄")16”) (91⁄16") K120D K160D K230D K240D

Custom-made products are available on request. 139 The 1100 Balustrade The Kensington Balustrade (USA only)

The 1100 Balustrade is offered as an alternative to the Standard Range The Kensington Balustrade is an imposing balustrade of handsome should you require a heavier design of balustrading. It also complies proportions. It comprises weathered rail, upper and lower plinths, unique 5 with the Building Regulation height of 1100mm (43 ⁄16”), which is K610B square balusters and rectangular piers. The plinth moulding is used required in certain instances, without the need to use additional to frame the inset panel of the pier shaft. under-copings or to construct upstands. TS Tech Sheet No. B45 TS Tech Sheet No. B40

503 (1913⁄16") 554 (2113⁄16")

T905 RAIL T940 RAIL

922 1 3 K610B (36 ⁄4") K725G 1100 (43 ⁄8") BALUSTERS Excluding BALUSTERS Excluding joints joints

T945 PLINTH T910 PLINTH T950 PLINTH

3 Standard length of rail / plinth 3 13 16 416 (16 ⁄8") 400 (15 ⁄4") 528 (20 ⁄ ") Standard length of rail/plinth 5 7 1 550 (21 ⁄8") supplied 850mm (33 ⁄16") supplied 535mm (21 ⁄16") 450 (1711⁄16")

13 554 (2113⁄16") 503 (19 ⁄16")

K725G Baluster - 20kg (44 lb) K120M K210M K260M K220M 250 Standard Pier (complete) - 212kg (466 lb) 296 1 383 388 (15 ⁄4") 13 1 (115⁄8") (9 ⁄16") (15 ⁄16") Corner Pier (complete) - 296kg (651 lb) T905 Rail - 67kg/m (45 lb/ft) Free-standing T910 Plinth - 121kg/m (81 lb/ft) PLANS SHOW PIER CAPS 503 (1913⁄16") K270M K200M 1 1 388 (15 ⁄4") K110M 383 (15 ⁄16") 503 503 5 13 296 (11 ⁄8") 13 13 16 250 (9 ⁄16") (19 ⁄16") (19 ⁄ ")

15 150 (5 ⁄16") 100 (315⁄16") Free-standing 120 (43⁄4")

554 (2113⁄16") 725 (289⁄16") 610 (24") K610B Baluster - 21kg (46 lb) K100M K200 Corner Pier (complete) - 300kg (660 lb) 554 K210 Intermediate Pier (complete) 13 (21 ⁄16") 232kg 102 (4") K220 Terminal Pier (complete) 225 (87⁄8") } (510 lb) 110 (45⁄16") K260 Freestanding Pier (complete)

7 T940 Rail - 37kg/m (25 lb/ft) 250 (9 ⁄8") 166 230 (91⁄16") (69⁄16") 13 T945 Upper Plinth - 41kg/m (28 lb/ft) 300 (11 ⁄16") 280 (11") 362 (141⁄4") PLANS SHOW PIER CAPS 330 (13") T950 Lower Plinth - 57kg/m (38 lb/ft)

430 (1615⁄16") 140 Custom-made products are available on request. ARCHITECTURAL STONEWORK BALUSTRADES The Spiral Balustrade This is a very special type of balustrade and can be offered, as standard, only in the components and dimensions indicated in the table below.

2018 (797⁄16") 1979 (7715⁄16") TS Tech Sheet No. B60

T110Q RAIL 797 (313⁄8") Dimensions Excluding joints Left and Right-handed 90° sweeps: 1 Total Rise: 1500mm (59 ⁄16”) 7 Outer c/l Radius: 4112mm (161 ⁄8”) 7 Inner c/l Radius: 1865mm (73 ⁄16”) 7 Width of Staircase: 2018mm (79 ⁄16”)

1500 (591⁄16") Components FS-style balustrade comprising: T900Q PLINTH 3 797 (31 ⁄8") T110-style Rail T920Q UNDER-COPING Excluding joints T900-style Plinth KG533-style Baluster Left hand Spiral Balustrade illustrated above. T920-style Under-Coping (optional)

Custom-made products are available on request. 141 ARCHITECTURAL STONEWORK THE STANDARD RANGE

REGENCY URN BALUSTRADES A530 377 (147⁄8")

279 (11") Assembly Details C E

We recommend that non-ferrous fixings (available as part of the X950 PIER CAP RAIL Balustrade Installation Pack - UK only) be incorporated at all rail joints and in horizontal beddings in all cases. All balusters are supplied with

stainless steel dowels for installing to rails and plinths. All rails, plinths BALUSTER PIER and under-copings are supplied in standard lengths, cutting and drilling SHAFT to final specification to be undertaken by your installation contractor.

Professional advice should be taken particularly where Building Regulations / Codes and local bye-laws need to be complied with. It is

recommended that, if pier shafts are in-filled with concrete, the shaft PIER BASE PLINTH

section should be lined with polystyrene, Styrofoam or similar to act as 1 337 (131⁄4") 6 ( ⁄4") an isolating medium. Y (BAY LENGTH) Haddoncraft Forge has a range of wrought iron Baluster Bars for use in X (OVERALL BASE DIMENSION) conjunction with Haddonstone balustrading, see image below. The bars 20 (13⁄16") 20 (13⁄16") can be used to meet Building Regulation spacing requirements. C = Centre Baluster Spacing. E = End Baluster Spacing

PS style with K610G Balusters and T920 Under-Copings It is most important to refer to Tech Sheet GAR1 to ensure correct installation. Standard assembly recommendations and typical details are available on request. Please ask for the relevant Tech Sheet. Cutting Recommendations: General Assembly: TS Tech Sheet No. B50 TS Tech Sheet No. GAR1

TABLE A For normal baluster spacing: approx. 305mm (12”) centres Select highest band available unless there are other overriding factors

Bay Lengths Rails/Plinths 7 Band (centreline to (centreline to No. of 900mm (35 ⁄16”) Balusters centreline of centreline of long rails/plinths piers) in mm piers) in inches and under-copings where applicable)

5 1 -829 -32 /8” 1 1 11 7 2 830-1129 32 /16”-44 ⁄16” 1 2 1 3 3 1130-1249 44 /2”-49 ⁄16” 1 3 1 1 4 1250-1429 49 /4”-56 ⁄4” 2 3 5 1 5 1430-1729 56 /16”-68 ⁄16” 2 4 1 7 6 1730-2029 68 /8”-79 ⁄8” 2 5 15 13 7 2030-2155 79 /16”-84 ⁄16” 2 6 7 11 8 2156-2329 84 /8”-91 ⁄16” 3 6 3 1 9 2330-2629 91 /4”-103 ⁄2” 3 7 9 5 10 2630-2929 103 /16”-115 ⁄16” 3 8 3 1 11 2930-3061 115 /8”-120 ⁄2” 3 9 9 1 12 3062-3229 120 /16”-127 ⁄8” 4 9 3 15 13 3230-3529 127 /16”-138 ⁄16” 4 10 3 14 3530-3829 139”-150 ⁄4” 4 11 13 1 15 3830-3967 150 /16”-156 ⁄8” 4 12

This table has been compiled to give an approximate Centre Baluster Spacing (see diagram) of 305mm (12”) and a fixed End Baluster Spacing of 200mm (8”).

FS style with K724G Balusters Haddoncraft Forge Baluster Bar

142 Custom-made products are available on request. The Standard Range 3. Divide each run into suitable bays, generally incorporating piers at ends and corners.

Tables A, B, C, D and E have been compiled to simplify the ordering 4. When determining bay lengths, as a guideline, the highest band of the STANDARD RANGE of balustrade components and enable you should be selected, but other overriding factors may need to be to design and price your own balustrade. Alternatively, approximate taken into account, such as achieving aesthetic balance, correlating guide prices can be obtained from the price list. with other architectural elements, relating bays to the height of the balustrade and the overall scale of the surroundings. You will also find below tables of the many horizontal curves and ramps available in the STANDARD RANGE – these are shown in Tables 1 5. To calculate bay lengths, first deduct 337mm (13 ⁄4”) from the C and D. overall base dimension to determine the distance between the centres of the end piers, then divide this figure by the number of bays required. The terms Weathered and Part-Weathered refer to the style of the Then refer to Tables A and B. balustrading rails and caps and not to the maturity of the stonework. For standard colours and finishes see page 206. 6. Should extra height be required or coping to a substructure, select appropriate under-coping to suit balustrade type (see page 145). Haddonstone (USA) Ltd offers additional Balustrades and Parapet Screening designs to comply with specific Building Codes. For further 7. Choose piers to suit balustrade layout, i.e. number of end piers, details, refer to the Architectural Supplement or view: number of intermediate piers, number of corner piers. www.haddonstone.com/view-catalogue 8. ORDER CHECKLIST HOW TO USE TABLES A and B The order should comprise total number of balusters, total number of By following this simple procedure you will be able to design, price and rails, total number of plinths, total number of piers incorporating end order your own balustrade from the STANDARD RANGE: piers, intermediate piers and corner piers as required.

1. Choose type of baluster (see page 144) and style of balustrade (see pages 137, 138 and 139). TABLE C TABLE D 2. Measure the overall base dimension of each run of balustrade Horizontal Curved Balustrade Ramped Balusters Rails and Plinths giving consideration to the fact that, particularly where balustrade KG311 16° 18° 27° 13 Available in both Flat and Weathered abuts a wall, the cap oversails the base by 20mm ( ⁄16”), see diagram configurations in the following radii: KG356 20° 27° opposite. 11 KG430 13° 500mm (19 /16”) 3 1000mm (39 /8”) KG457 13° 20° 27° 30° 33° 40° 1 1500mm (59 /16”) KG464 16° 23° 3 2000mm (78 /4”) TABLE B KG520 23° 7 2500mm (98 /16”) For close baluster spacing: approx. 225mm (9”) centres 1 KG533 13° 16° 20° 21° 27° 30° 36° Select highest band available unless there are other overriding factors 3000mm (118 /8”) 13 3500mm (137 /16”) KB609 27° 33° 42° Bay Lengths Rails/Plinths 1 4000mm (157 /2”) KG609 30° 7 3 Balusters (centreline to (centreline to No. of 900mm (35 ⁄16”) Balusters 4500mm (177 /16”) KG610 13° 16° 20° 21° 23° 27° 30° 33° 36° centreline of centreline of long rails/plinths 7 Band 5000mm (196 /8”) piers) in mm piers) in inches (and under-copings KJ610 27° 30° 36° 1 where applicable) 6000mm (236 /4”) 9 KG629 20° 27° 29° 31° 33° 16 3 7000mm (275 / ”) 16 16 -691 -27 / ” 1 1 15 8000mm (314 /16”) KG724 13° 16° 20° 23° 26° 27° 29° 30° 33° 1 1 17 692-916 27 /4”-36 ⁄16” 1 2 5 9000mm (354 /16”) 1 15 KG725 34° 1100 Balustrade 18 917-1141 36 /8”-44 ⁄16” 1 3 11 10000mm (393 /16”) 3 The ramp angle is the angle of rise/pitch 19 1142-1249 45”-49 ⁄16” 1 4 All radii to centrelines of plinth/rail. measured from the horizontal. 1 3 20 1250-1366 49 /4”-53 ⁄4” 2 4 13 5 21 1367-1591 53 /16”-62 ⁄8” 2 5 11 1 22 1592-1816 62 /16”-71 ⁄2” 2 6 TABLE E 9 3 23 1817-2041 71 /16”-80 ⁄8” 2 7 Typical Component Weights 7 13 24 2042-2155 80 /16”-84 ⁄16” 2 8 Baluster Type: 7 3 25 2156-2266 84 /8”-89 ⁄16” 3 8 K724G K610G K533G K457G K356G 1 1 26 2267-2491 89 /4”-98 ⁄16” 3 9 15kg 11kg 10kg 8kg 4.5kg 1 15 (33 lb) (24 lb) (22 lb) (18 lb) (10 lb) 27 2492-2716 98 /8”-106 ⁄16” 3 10 13 28 2717-2941 107”-115 ⁄16” 3 11 Standard pier to suit (complete): 7 1 29 2942-3061 115 /8”-120 ⁄2” 3 12 105kg 97kg 87kg 81kg 75kg 9 5 (231 lb) (214 lb) (191 lb) (178 lb) (165 lb) 30 3062-3166 120 /16”-124 ⁄8” 4 12 11 1 31 3167-3391 124 /16”-133 ⁄2” 4 13 135° pier to suit (complete): 9 3 32 3392-3616 133 ⁄16”-142 ⁄8” 4 14 154kg 147kg 134kg 121kg 120kg 7 1 (339 lb) (323 lb) (295 lb) (266 lb) (264 lb) 33 3617-3841 142 /16”-151 ⁄4” 4 15 5 1 34 3842-3967 151 /16”-156 ⁄8” 4 16 T120A 900mm Standard Rail 31kg (68 lb) This table has been compiled to give an approximate Centre Baluster Spacing T900A 900mm Standard Plinth 30kg (66 lb) (see diagram) of 225mm (9”) and a fixed End Baluster Spacing of 150mm (6”).

Custom-made products are available on request. 143 ARCHITECTURAL STONEWORK BALUSTRADES

Standard Balusters These balusters are circular in section except top and bottom blocks which are square.

TS Tech Sheet No. B75

Non Standard Balusters Unless otherwise stated, these balusters are circular in section except top and bottom blocks which are square. TS Tech Sheet No. B75

No piers available for this Baluster. (USA only) For use with Kensington For suitable rails and plinths see page 150. Balustrade, see page 140.

144 FS style with KG533 Ramped Balusters and T920 Wide Under-Copings 7 BALUSTRADE UNDER-COPINGS Optional, for use with the standard balustrade range. Available in 900mm (35 ⁄16”) lengths only. Pier Under-Coping 20kg (44 Ib) 135° Pier Under-Coping 29kg (64 lb) Narrow Central Run-In Under Copings TS Tech Sheet No. B90

377 (147⁄8") 377 (147⁄8") T935A Pier Under Under 265 377 Coping Coping K100H K110H 7 K120H 7 (10 ⁄16") (14 ⁄8") 31kg (68lb) 1 1 190 (7 ⁄2") 337 (13 ⁄4") 3 350 (13 ⁄4") 60 60 3 76 (3") 3 76 (3") (2 ⁄8") (2 ⁄8") 7 7 135° 265 (10 ⁄16") 377 (14 ⁄8") 377 K130H K140H K150H (147⁄8")

7 7 215 (8 ⁄16") 327 (12 ⁄8") 194 (75⁄8") Deep cental run-in under copings also available (USA only) Plans show Pier Under-Copings

Narrow Side Run-In Under Copings TS Tech Sheet No. B91

7 377 (14 ⁄8") 377 (147⁄8")

K200H K210H K220H 377 K230H T925A Pier (147⁄8") Under Under Coping Coping 31kg (68lb) 1 1 190 (7 ⁄2") 337 (13 ⁄4") K240H K250H K260H 265 (107⁄16") 60 76 (3") 60 76 (3") (23⁄8") (23⁄8") 3 350 (13 ⁄4") 265 (107⁄16") 377 (147⁄8")

135° 377 K270H K280H K290H K300H (147⁄8") 215 (87⁄16") 327 (127⁄8")

194 (75⁄8") Deep side run-in under copings also available (USA only) Plans show Pier Under-Copings

Wide Central Run-In Under Copings TS Tech Sheet No. B92

7 377 (147⁄8") 377 (14 ⁄8") T930A Pier K130K Under Under Coping Coping K100K K110K K120K 377 (147⁄8") 46kg (101lb) 1 190 (71⁄2") 337 (13 ⁄4")

3 4 7 7 60 60 350 (13 ⁄ ") 377 (14 ⁄8") 377 (14 ⁄8") 76 (3") 76 (3") (23⁄8") (23⁄8") 7 377 (14 ⁄8") 377 (147⁄8") 135° 377 377 K140K K150K K160K 7 K170K (147⁄8") (14 ⁄8")

7 7 Free-standing 327 (12 ⁄8") 327 (12 ⁄8") 5 194 (7 ⁄8") Plans show Pier Under-Copings

Wide Side Run-In Under Copings TS Tech Sheet No. B93

7 7 377 (14 ⁄8") 377 (14 ⁄8")

K200K K210K K220K 377 K230K T920A Pier (147⁄8") Under Under Coping Coping 46kg (101lb) 1 190 (71⁄2") 337 (13 ⁄4") K240K K250K K260K 60 60 76 (3") 76 (3") (23⁄8") (23⁄8") 7 377 (14 ⁄8") 377 (147⁄8") 350 (13 3⁄4")

135° 7 7 K270K 377 K280K K290K K300K 327 (12 ⁄8") 327 (12 ⁄8") (147⁄8")

5 194 (7 ⁄8") Plans show Pier Under-Copings

Custom-made products are available on request. 145 ARCHITECTURAL STONEWORK Parapet Screening

For a less formal and more decorative alternative to balustrading, parapet screening provides an effective solution.

As shown in the drawings, the length of parapet unit can be varied by using different combinations of the two basic panels J248 and J362. We show six of the most commonly used bays (TYPES A-F). The bay dimensions shown are from centreline to centreline of pier.

The piers are specially designed and produced for end, centre and corner use as well as for 135° angles; so when ordering please state clearly the number and reference of each type required.

All rails and plinths are supplied in standard lengths as indicated, cutting to final specification to be undertaken by your installation contractor.

TS Tech Sheet No. PS10 & PS11 Parapet Screening (showing TYPE F bay)

229 248229 248 Typical Component Weights 1 1 3 (9") (93⁄4")1 362 (14 ⁄4") 1 311 (12 ⁄4") 1 (9") (9 ⁄4") 362 (14 ⁄4") 311 (12 ⁄4") 165 (61⁄2")165 (6 ⁄2") Standard lengthStandard of rail length of rail J400A Rail: 16kg (35 lb) TYPE A 7 7 TYPE A supplied 621(24supplied⁄16") 621(24 ⁄16") J400F Plinth: 25kg (55 lb) J400A RAILJ400A RAIL 127 (5") 127 (5") J248 End Panel: 9kg (20 lb) J248 J362J248 J362 J362 Centre Panel: 13kg (29 lb) PIER PIER 1 495 495 774 (301⁄2")774 (30 ⁄2") 1 Standard Pier (complete): 76kg (167 lb) (191⁄2") (19 ⁄2") ExcludingExcluding joints joints 135° Pier (complete): 151kg (332 lb) J400F PLINTHJ400F PLINTH 152 (6") 152 (6") Standard lengthStandard of plinth length of plinth 3 supplied3 628(24 ⁄4") supplied5 628(24 ⁄4") 1 1 2200 (8652200⁄8") (86 ⁄8") 140 (5 ⁄2")140 (5 ⁄2")

1 292 (111⁄2") Plans showing Pier Caps 292 (11 ⁄2") TYPE B TYPE B

J100 J100 J110 J110

9 135 135 2428 (9592428⁄16") (95 ⁄16") J130 J130 311 311 1 165 (61⁄2") 311 311 165 (6 ⁄2") J120 J120 11 1 (121⁄4") (12(12 ⁄⁄44")") (12 ⁄4") 3 TYPE C TYPE D 182 (73⁄16") 182 (7 ⁄16") TYPE C TYPE D

1 311 (121⁄4") 311 (12 ⁄4")

J140 J140 J150 J150 7 7 1 1 1698 (66 1698⁄8") (66 ⁄8") 740 (29 ⁄8740") (29 ⁄8")

TYPE E TYPE E TYPE F TYPE F 1 311 (121⁄4") 311 (12 ⁄4")

Free-standingFree-standing

311 311 J1601 J160 (121⁄4") (12 ⁄4")

1 311 (121⁄4") 311 (12 ⁄4")

1 1 8 7 968 (38 ⁄8968") (38 ⁄ ") 1470 (577⁄18470") (57 ⁄8")

146 Custom-made products are available on request. Refer to the Architectural Supplement for specific US designs. ARCHITECTURAL STONEWORK GATE PIERS

Gate Pier S120

This gate pier is a standard item in the Haddonstone collection. Heights can be varied according to the number of centre shaft units used. When ordering please note that each course is supplied in two halves. Both halves need to be ordered. Custom-made products are available on request.

If the gate piers are to be infilled with concrete the shaft sections should be lined with 25mm (1”) polystyrene (Styrofoam) or similar to act as an isolating medium. It is most important to refer to the relevant Tech Sheet to ensure correct installation.

Haddoncraft Forge is able to supply gates and railings to individual specifications for use in conjunction with these Gate Piers, see page 195.

TS Tech Sheet No. M40

E120A

E120B S120B S120C

S120D

S120E

2590mm (102") Excluding joints

280 (11") S120E

S120F 280 (11")

S120G

533 (21") 699 (271⁄2")

Weight of Gate Pier only: 914kg (2011 lb)

Custom gate pier. Custom gate pier.

See pages 83-85 for Finials. See page 86 for Balls & Bases. Refer to the Architectural Supplement for specific US designs. 147 ARCHITECTURAL STONEWORK PIER CAPS

Haddonstone has a large selection of Pier Cap designs in a range For Finials and Balls & Bases to complement our range of Pier Caps of sizes. If your requirements are not featured we can produce custom refer to pages 83-86. designs to your specifications. TS Tech Sheet No. PC10 & PC11

915 (36") 346 (135/8") 686 (27") 440 (175⁄16") 356 (14") 1 S201C 63 (2 ⁄2") S100B 22kg (48 lb) 175 (67⁄8") 20kg (44 lb)

191 (71⁄2") 150 (515⁄16") S100C 187kg (411 lb) S400B 104kg (229 lb) 407 55 (23⁄16") S100S 57kg (125 lb) (16") 219 (8 5/8")

216 (81⁄2") S400C 328kg (722 lb) 55 (23⁄16") S100S 457 (18") 800 (311⁄2")

845 (331⁄4") 175 (67⁄8") 711 (28") 1 S200C 43kg (95 lb) 826 (32 ⁄2") 1067 (42") 457 (18") S400C supplied with lifting socket. 51 (2") S110B 19kg (42 lb) 330 (13") 133 (51⁄4") 572 (221⁄2") S110C 134kg (295 lb) 3 356 (14") 44 (1 ⁄4") S110S 37kg (81 lb) 584 (23") 152 (6") 44 (13⁄4") S110S 7 S410B 75kg (165 lb) 175 (6 ⁄8") 292 (111⁄2") 686 (27") S210C 72kg (158 lb) S410C 133kg (293 lb) 737 (29") 1 140 (5 ⁄2")

737 (29") 1 546 (21 ⁄2") 457 (18")

1 64 (2 ⁄2") S120B 33kg (73 lb) 597 (231⁄2") 813 (32") 114 (41⁄2") S120C 95kg (209 lb) 687 (27")

44 (13⁄4") S120S 27kg (59 lb) 7 175 (6 ⁄8") S215C 107kg (235 lb) 377 (147⁄8") 3 44 (1 ⁄4") 3 S120S 234 (9 ⁄16") 7 555 (21 ⁄8") 1 560 (22 ⁄16") 100 (315⁄16") S420B 24kg (53 lb) 737 (29") 202 (715⁄16") 546 (211⁄2") S420C 39kg (86 lb) 102 (4") 1 7 64 (2 ⁄2") S120B 33kg (73 lb) 799 (31 ⁄16")

S125C 122kg (269 lb) 126 (5") 7 175 (6 ⁄8") 395 (159⁄16") S220C 140kg (308 lb) 565 (221⁄4")

555 (217⁄8")

672 (267⁄16") 730 (283⁄4") 457 (18") 1 64 (21⁄2") S140B 24kg (53 lb) 1029 (40 ⁄2") 11 246 (9 ⁄16") 105 (41⁄8") S130C 91kg (200 lb) 175 S500C 75kg (165 lb) 102 (4") 7 (6 ⁄8") S230C 240kg (528 lb)

610 (24") 11 500 (19 ⁄16")

610 (24") 902 (351⁄2") 457 (18")

64 (21⁄2") S140B 24kg (53 lb) 641 (251⁄4")

146 (53⁄4") S140C 88kg (194 lb) 204 (8") 216 (81⁄2") S510C 115kg (253 lb) 102 (4") S300C 94kg (207 lb)

391 (153⁄8") 521 (201⁄2") 686 (27") S300S 46kg (101 lb) 175 (67⁄8") 584 (23") 330 (13") 51 (2") S150B 10kg (22 lb)

3 120 (4 ⁄4") S150C 56kg (123 lb) 381 (15")

7 48 (17⁄8") S150S 19kg (42 lb) 530 (20 ⁄8")

762 (30") 457 (18") 5 550 (21 ⁄8") 475 (1811⁄16") S600B

5 98kg 512 (203⁄16") 236 (9 ⁄16") (216 lb) 290 (117⁄16") S310C 143kg (315 lb) 3 411 (16 ⁄16") 51 (2") S160B 8kg (18 lb)

5 S160C 40kg (88 lb) 114 (4 ⁄16") 7 S310S 80kg (176 lb) 175 (6 ⁄8") S600C 111kg (244 lb) 146 (53⁄4") 48 (17⁄8") S160S 12kg (26 lb)

11 1 361 (143⁄16") 500 (19 ⁄16") 560 (22 ⁄16") 7 1 3 404 (15 ⁄8") 648 (25 ⁄2") 730 (28 ⁄4")

148 Custom-made products are available on request. For Finials and Balls & Bases see pages 83-86. 565 (221⁄4") 430 (1615⁄16")

108 (41⁄4") 80 (31⁄8") S840C 20kg (44 lb) S950C 49kg (108 lb)

325 (123⁄4")

S620C 3 400 (15 ⁄4") 476 (183⁄4") 150kg (331 lb)

403 (157⁄8") 609 (24")

1 3 2 S955C 51kg (112 lb) 85 (3 ⁄8") S850C 20kg (44 lb) 89 (3 ⁄ ")

600 (235⁄8")

5 363 (14 ⁄16") 520 (201⁄2")

15 609 (24") 7 329 (12 ⁄16") 403 (15 ⁄8") 1 15 1 S890C 14kg (31 lb) 108 (4 ⁄4") S956C 57kg (125 lb) 75 (2 ⁄16") S715C 20kg (44 lb) 89 (3 ⁄2")

1 240 (97⁄16") 520 (20 ⁄2")

3 419 (161⁄2") 670 (26 ⁄8") 5 515 (20 ⁄ 16") 1 15 102 (4") S900C 25kg (55 lb) 108 (4 ⁄4") S960C 65kg (143 lb) 75 (2 ⁄16") S720C 32kg (70 lb)

330 (13") 580 (2213⁄16")

800 (311⁄ 2") 1 3 419 (16 ⁄2") 670 (26 ⁄8") 142 9 1 1 S961C 65kg (143 lb) (5 ⁄16") S800C 127kg (279 lb) 89 (3 ⁄2") S910C 24kg (53 lb) 89 (3 ⁄ 2")

13 760 (2915⁄16") 330 (13") 580 (22 ⁄16")

9 16 675 (26 ⁄ ") 3 11 705 (27 ⁄4") 500 (19 ⁄16")

14 2 (59⁄16") 1 S810C 100kg (220 lb) 105 (41⁄8") S920C 40kg (88 lb) 108 (4 ⁄4") S970C 74kg (163 lb)

3 635 (25") 417 (167⁄16") 615 (24 ⁄16")

5 15 550 (215⁄ 8") 550 (21 ⁄8") 760 (29 ⁄16")

5 1 1 16 4 108 (4 ⁄4") S980C 90kg (198 lb) 110 (4 ⁄ ") S820C 45kg (99 lb) 108 (4 ⁄ ") S930C 45kg (99 lb)

1 3 520 (201⁄ 2") 460 (18 ⁄8") 670 (26 ⁄8")

5 1 820 (32 ⁄16") 518 (203⁄ 8") 565 (22 ⁄4")

1 3 1 108 (4 ⁄4") S990C 101kg (222 lb) 85 (3 ⁄8") S830C 34kg (75 lb) 89 (3 ⁄2") S940C 44kg (97 lb)

13 3 478 (18 ⁄16") 476 (18 ⁄4") 730 (283⁄4") S995C - 32" underside version of S990C. (USA only) S997C - 36" underside version of S990C. (USA only)

For Finials and Balls & Bases see pages 83-86. Refer to the Architectural Supplement for specific US designs. 149 ARCHITECTURAL STONEWORK COPINGS & CAPPINGS

The Haddonstone collection includes copings and cappings in many designs. Most requirements for straight flat runs of wall, curved wall sections, ramped walls, serpentine walls and stepped walls can be met from our standard range.

We would be pleased to discuss your special requirements.

For standard lengths, please refer to the price list. Custom-made Copings and Cappings are available on request.

All copings and cappings are supplied throated although, in certain applications, not necessarily to BS 5642: 1983 (2014). We strongly recommend that you refer to Eurocode 6 and PD 6697: 2010.

TS Tech Sheet No. WC10, WC20 & WC30

13” Ball & Collared Base (see p74), Block S140B, Cap S130 & Coping T150.

178 (7") 508 (20") 330 (13") 356 (14") T100 1 T330 T610 102 (4") 28kg/m (19lb/ft) T200 89 (3 ⁄2") 76 (3") 102 (4") 127 (5") 93kg/m (62lb/ft) 47kg/m (32lb/ft) 60kg/m (40lb/ft) 140 (51⁄2") 305 (12") 381 (15") 7 290 (11 ⁄16") 1 337 (13 ⁄4") 1 230 (9 ⁄16") 1 470 (18 ⁄2") 1 100 (315⁄16") T340 15 64 (2 ⁄ 2") T620 36kg/m (24lb/ft) 3 T110 50kg/m (34lb/ft) 75 (2 ⁄16") 86 (3 ⁄8") 32kg/m (22lb/ft) T210 3 127 (5") 298 (11 ⁄4") 146 87kg/m (58lb/ft) (53⁄4") 1 178 (7") 343 (13 ⁄2") 280 (11") 1 T700 230 (9 ⁄16") 76 (3") 1 T400 24kg/m (16lb/ft) 1 80 (3 ⁄8") 358 (14 ⁄8") 33kg/m (22lb/ft) T120 105 (41⁄8") 35kg/m (24lb/ft) 270 (105⁄8") T215 127 (5") 146 73kg/m (49lb/ft) 292 (111⁄2") 5 (53⁄4") 312 (12 ⁄16") T710 1 76 (3") 231 (9 ⁄8") 37kg/m (25lb/ft) 1 337 (13 ⁄4") 136 (53⁄8") T410 47kg/m (32lb/ft) T130 254 (10") 89 (31⁄2") 48kg/m (32lb/ft) 3 240 (9 7⁄16") 350 (13 ⁄4") T217 248 (93⁄4") 127 (5") 54kg/m (36lb/ft) 60 (23⁄ 8") T720 40kg/m (27lb/ft) 355 (14")

1 127 (5") 3 337 (13 ⁄4") 85 (3 ⁄8") T420 48kg/m (32lb/ft) 1 T140 368 (14 ⁄2") 3 3 102 (4") 52kg/m (35lb/ft) 310 (12 ⁄16") 315 (12 ⁄8") T800 3 3 T220 127 (5") 248 (9 ⁄4") 4 1 2 72kg/m (48lb/ft) 95 (3 ⁄ ") 43kg/m (29lb/ft) 394 (15 ⁄ ")

11 76 (3") T440 220 (8 ⁄16") 48kg/m (32lb/ft) 254 (10") 368 (141⁄2") T221A - 8" underside version of T220. (USA only). 356 (14") T150 305 (12") 102 (4") 56kg/m (38lb/ft) 378 (147⁄8") 434 (171⁄16") 15 13 T820 10 0 (3 ⁄16") 279 (11") T225 72 (2 ⁄16") 45kg/m (30lb/ft) 15 3 T450 100 (3 ⁄16") 55kg/m (37lb/ft) 85 (3 ⁄ 8") 57kg/m (38lb/ft) 275 (1013⁄16")

7 1 2 424 (1611⁄16") 215 (8 ⁄16") 394 (15 ⁄ ") 410 (161⁄8") T160 410 (161⁄8") 102 (4") 3 66kg/m (44lb/ft) 425 (16 ⁄4") T830 125 3 15 1 T470 86 (3 ⁄8") 76kg/m (51lb/ft) (4 ⁄16") 3 9 T300 114 (4 ⁄2") 335 (13 ⁄16") 90 (3 ⁄16") 9 73kg/m (60lb/ft) 60kg/m (40lb/ft) 65 (2 ⁄16") 375 (143⁄4") 250 (913⁄16") 483 (19") 548 (219⁄16") 3 T170 381 (15") 335 (13 ⁄16") 10 8 (41⁄4") 82kg/m (55lb/ft) T840 T530 102 (4") 1 T310 90 (39⁄16") 85kg/m (57lb/ft) 89 (3 ⁄2") 76 (3") 48kg/m (32lb/ft) 394 (151⁄2") 58kg/m (39lb/ft) 465 (181⁄4") 235 (91⁄4")

3 584 (23") 324 (12 ⁄4") 290 (117⁄16") 356 (14") 1 63 (2 ⁄2") 1 2 T880 32kg/m (22lb/ft) 1 T180 T540 38 (1 ⁄ ") 108 (4 ⁄4") 90 (39⁄16") 99kg/m (66lb/ft) 64 (21⁄2") 41kg/m (28lb/ft) T320 35kg/m (23lb/ft) 51 (2") 301 (117⁄8")

495 (191⁄2") 190 (71⁄ 2") SWIMMING POOL COPING

150 Refer to the Architectural Supplement for specific US designs. For TecLite cappings see page 183. To assist our private and professional clients with the ordering of Haddonstone copings and cappings, we have introduced this new page to the catalogue containing all the relevant terminology required.

For further details relating to coping and capping terminology, please either contact your nearest Haddonstone office or refer to:

TS Tech Sheet No. WC10, WC20 & WC30

Length in mm VERTICAL CURVE MEETING HORIZONTAL COPING WITH VERTICAL RETURN

Pier Caps S600B/C and S215C with Coping T130. T150V shown

Radius to centre line in mm

Thickness of Centre line girth horizontal coping Centre line girth length in mm length in mm Radius to underside HORIZONTAL CURVE: in mm PLAIN ENDED

T150H-00787 shown. (where 787 represents the centre line radius in mm) ¼ CIRCLE PLAN ENDED T150W-00610 shown (where 610 represents the radius in mm)

INSIDE CORNER STONE Length in mm TERMINAL END CORNER STONE (Asymmetrical coping only) (Symmetrical coping only) T830G shown

T150E shown

T150T shown

Length in mm OUTSIDE CORNER STONE (Asymmetrical coping only)

T830F shown

PLAIN ENDED

T150A shown

TS Tech Sheet No. WC10, WC20 & WC30 for Coping & Capping Terminology. 151 ARCHITECTURAL STONEWORK COLUMNS & PILASTERS

Our range of columns and pilasters are derived from the architectural TS Tech Sheet No. C50 for M1 vocabulary of the ancient world. TS Tech Sheet No. C40 for M2 TS Tech Sheet No. C30 for M3 A column will usually have an entablature of some kind to support, TS Tech Sheet No. C10 for M4 & M5 for example as part of a portico, temple, pavilion or classical facade. TS Tech Sheet No. C20 for M7 & M8 TS Tech Sheet No. C60 for M9 Our columns are designed to be non-structural elements and so are TS CAD1 Column Assembly Details provided with hollow cores. These, if filled with reinforced concrete or used to sleeve a structural steel member, can then be used in structural situations. They are supplied in component form, as indicated, and should be erected on suitable foundations designed TUSCAN by a structural engineer to suit loadings and ground conditions. COLUMN M5 The shaft sections should be lined with polystyrene (Styrofoam) 355kg (781 lb) 5 or similar to act as an isolating medium when column cores are infilled. Core 160mm (6 ⁄16") CAPITAL OPTIONS We strongly recommend that professional advice is taken to ensure that any proposal is designed to be structurally sound. It is most important to refer to Tech Sheet CAD1 to ensure correct installation. M1 Columns with Corinthian Capitals

TUSCAN TUSCAN TUSCAN TUSCAN COLUMN PILASTER COLUMN PILASTER TUSCAN TUSCAN M7B M7B M7 M5 TUSCAN TUSCAN COLUMN PILASTER 258kg (568 lb) 101kg (222 lb) 352kg (775 lb) 145kg 5 5 COLUMN PILASTER M7A M7A Core 110 mm (4 ⁄16") Core 110 mm (4 ⁄16") (319 lb) M8 M8 247kg (543 lb) 95kg (209 lb) Half column Square in section 5 136kg (299 lb) 69kg (152 lb) Core 110 mm (4 ⁄16") also available (Shaft has no diminution) 356 (14") 127 (5") 5 Core 110 mm (4 ⁄16") Half column 1 1 362 (14 ⁄4") 133 (5 ⁄4") 402 (1513⁄16") Half column also available 152 (6") 152 (6")

also available 1 1 362 (14 ⁄4") 133 (5 ⁄4") 203 (8") 203 (8") 203 (8") 254 (10") 1 292 (11 ⁄2") 120 (43⁄4") 203 (8") 203 (8") 220 114 114 (811⁄16") 1 1 (4 ⁄2") (4 ⁄2") 220 178 (811⁄16") (7")

2121 2121 1 1 7 15 7 (83 ⁄2") (83 ⁄2") 1942 (76 ⁄16") 1930 (75 ⁄16") 1942 (76 ⁄16")

15 1764 (697⁄16") 1752 (68 ⁄16") 3 1 1772 (69 ⁄4") 1760 (69 ⁄4")

63 63 63 1 1 260 1 (2 ⁄2") 260 (2 ⁄2") (2 ⁄2") 260 305 (12") 1 1 1 (10 ⁄4") (10 ⁄4") (10 ⁄4") 76 229 (9") (3") 3 3 BASE 3 BASE 163 136 (5 ⁄8") BASE 5 136 (5 ⁄8") 5 8 136 (5 ⁄8") 163 5 5 193 (7 ⁄8") 193 (7 ⁄ ") 7 117 (4 ⁄8") BASE 117 (4 ⁄8") (67⁄16") BASE (6 ⁄16") 51 (2") PLINTH 51 (2") PLINTH 51 (2") PLINTH

15 15 1 1 150 (5 ⁄16") PEDESTAL 150 (5 ⁄16") 191 (71⁄2") 191 (71⁄2") 191 (7 ⁄2") 191 (7 ⁄2") 1 PEDESTAL PEDESTAL 191 (7 ⁄2") PEDESTAL 300 300 13 (11 ⁄16") PEDESTAL (1113⁄16") 7 98 (3 ⁄8") 1 1 1 1 1 298 (113⁄4") 362 (14 ⁄4") 114 (4 ⁄2") 362 (14 ⁄4") 114 (4 ⁄2") 362 (14 ⁄4") 3 406 (16") 127 (5") 111 (4 ⁄8") 3 1 3 13 3 4 1 4 4 133 (5 ⁄4") 4 1 325 (12 ⁄16") 400 (15 ⁄ ") 133 (5 ⁄ ") 400 (15 ⁄ ") 400 (15 ⁄ ") 432 (17") 140 (5 ⁄2")

13 7 3 173 (6 ⁄16") 225 (87⁄ 8") 225 (8 ⁄ 8") 400 (15 ⁄4")

1 152 Custom-made products are available on request. General note: Column dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. CORINTHIAN COLUMN M1 2361 kg (5194 lb) 13 3 Core 300-400mm (11 ⁄16"-15 ⁄4") CAPITAL OPTIONS

652 (2511⁄16") CORINTHIAN IONIC CAPITAL COLUMN 7 CAPITAL 25kg (55 lb) M9 215 (8 ⁄16") 330 59kg (130 lb) (13") DORIC 350 (133⁄4") TUSCAN 1116kg (2458 lb) 7 CAPITAL CAPITAL Core 200mm (7 ⁄8") 508 (20") 150 TUSCAN COLUMN M3 900 (357⁄16") 29kg (64 lb) 15 200 24kg (53 lb) CAPITAL OPTIONS (5 ⁄16") (77⁄8") 1 1680 kg (3696 lb) 445 (17 ⁄2") ABACUS 382 (151⁄16") 355 Core 225-310mm 450 End elevation 7 3 11 (14") 210 (8 ⁄8"-12 ⁄16") (17 ⁄16") 1 4 150 (8 ⁄ ") 15 625 (5 ⁄16") 5 CAPITAL OPTIONS (24 ⁄8")

3 1000 (39 ⁄8") CAPITALS FOR M2, M4 AND M5 COLUMNS (Interchangeable) 100 ABACUS (315⁄16") CORINTHIAN 175 TUSCAN (67⁄8") COLUMN COLUMN CAPITAL 9 M4 M2 700 (27 ⁄16") 396kg (871 lb) 365kg (887 lb) 255 5 5 1 Core 160mm (6 ⁄16") Core 160mm (6 ⁄16") (10 ⁄16") Half column also available CAPITAL OPTIONS 255 (101⁄16") TUSCAN 655 (253⁄4") CAPITAL OPTIONS 11 COLUMN 500 (19 ⁄16") 255 1 M5 (10 ⁄16") 175 (67⁄8") 355kg (781 lb) 5 Core 160mm (6 ⁄16") TUSCAN 425 (163⁄4") PILASTER 650 (259⁄16") CAPITAL OPTIONS M4 139kg (337 lb) CORINTHIAN PILASTER 1 255 (10 ⁄16") 130 (51⁄8") M2 508 (20") 155kg (341 lb) 3 (Shaft has no 425 (16 ⁄4") diminution) 355 (14") TUSCAN TUSCAN TUSCAN TUSCAN 13 6 (53⁄8") COLUMN PILASTER COLUMN PILASTER 1 3 TUSCAN TUSCAN M7B M7B M7 M5 382 (15 ⁄16") 136 (5 ⁄8") 254 TUSCAN TUSCAN COLUMN PILASTER 258kg (568 lb) 101kg (222 lb) 352kg (775 lb) (10") 150 145kg (515⁄16") 5 5 COLUMN PILASTER M7A M7A 16 16 150 150 Core 110 mm (4 ⁄ ") Core 110 mm (4 ⁄ ") (319 lb) 15 (515⁄16") (5 ⁄16") M8 M8 247kg (543 lb) 95kg (209 lb) Half column Square in section 5 136kg (299 lb) 69kg (152 lb) Core 110 mm (4 ⁄16") also available (Shaft has no diminution) 356 (14") 127 (5") 250 5 (913⁄16") Core 110 mm (4 ⁄16") Half column 1 1 362 (14 ⁄4") 133 (5 ⁄4") 402 (1513⁄16") Half column also available 152 (6") 152 (6") also available 1 1 362 (14 ⁄4") 133 (5 ⁄4") 203 (8") 203 (8") 203 (8") 254 (10") 1 292 (11 ⁄2") 120 (43⁄4")

203 (8") 203 (8") 220 SHAFT 11 114 114 (8 ⁄16") 5200 (2043⁄4") 1 1 (4 ⁄2") (4 ⁄2") 220 4968 5 178 (811⁄16") (195 ⁄8") (7")

2782 (1091⁄2") as shown, or 4491 13 15 16 (176 ⁄16") 2538 (99 ⁄ ") 2538 2388 2388 (9915⁄16") (94") (94") 2121 2121 1 1 7 15 7 (83 ⁄2") (83 ⁄2") 1942 (76 ⁄16") 1930 (75 ⁄16") 1942 (76 ⁄16")

15 1764 (697⁄16") 1752 (68 ⁄16") 3 1 1772 (69 ⁄4") 1760 (69 ⁄4")

63 63 63 1 1 260 1 260 70 74 (2 ⁄2") 260 (2 ⁄2") (2 ⁄2") 305 (12") 13 16 305 (12") 15 1 1 1 300 (11 ⁄ ") 3 (2 ⁄16") (10 ⁄4") (10 ⁄4") (10 ⁄4") 76 (2 ⁄4") 229 (9") (3") 3 3 BASE 5 3 BASE 163 159 136 (5 ⁄8") BASE 5 8 136 (5 ⁄8") 193 (7 ⁄8") 136 (5 ⁄8") 163 190 190 102 (4") BASE 5 5 193 (7 ⁄ ") 7 7 BASE 1 1 117 (4 ⁄8") BASE 117 (4 ⁄8") (6 ⁄16") BASE (6 ⁄16") (71⁄2") (7 ⁄2") (6 ⁄4") 51 (2") PLINTH 51 (2") PLINTH 51 (2") PLINTH 51(2") PLINTH

425 (163⁄4") 5 15 15 1 1 600 (23 ⁄8") 150 (5 ⁄16") PEDESTAL 150 (5 ⁄16") 1 2 1 2 191 (7 ⁄2") 2 1 191 (7 ⁄ ") PEDESTAL 191 (7 ⁄ ") PEDESTAL 191 (7 ⁄ ") 191 (7 ⁄2") PEDESTAL 300 300 300 279 300 13 PEDESTAL 13 279 1 13 13 16 (11 ⁄16") PEDESTAL 155 (6 ⁄8") BASE (11 ⁄16") PEDESTAL (11 ⁄16") (11 ⁄ ") (11") (11") BASE 7 7 1 16 200 (7 ⁄8") 98 (3 ⁄8") 1 1 1 1 1 75 (3") PLINTH 510 (20 ⁄ ") 298 (113⁄4") 362 (14 ⁄4") 114 (4 ⁄2") 362 (14 ⁄4") 114 (4 ⁄2") 362 (14 ⁄4") 3 3 1 11 127 (5") 400 (15 ⁄4") 120 (4 ⁄4") 445 (17 ⁄2") 144 (5 ⁄16") 1 15 3 406 (16") 7 165 (6 ⁄ 2") 10 0 (3 ⁄16") 111 (4 ⁄8") 3 1 3 1 3 570 (22 ⁄16") BASE PLINTH 13 4 4 4 133 (5 ⁄4") 4 1 11 3 15 325 (12 ⁄16") 400 (15 ⁄ ") 133 (5 ⁄ ") 400 (15 ⁄ ") 400 (15 ⁄ ") 432 (17") 140 (5 ⁄2") 424 (16 ⁄16") 132 (5 ⁄16") 457 (18") 150 (5 ⁄16") 13 PLINTH 123 (4 ⁄16")

625 PEDESTAL 5 402 250 500 (24 ⁄8") 13 13 (15 ⁄16") (9 ⁄16") PEDESTAL (1911⁄16")

3 7 13 7 7 3 5 680 (26 ⁄4") 850 (33 ⁄16") 173 (6 ⁄16") 225 (8 ⁄ 8") 225 (8 ⁄ 8") 400 (15 ⁄4") 237 (9 ⁄16") 3 720 (28 ⁄8") 900 (357⁄16") Refer to the Architectural Supplement for specific US designs. Custom-made products are available on request. 153 ARCHITECTURAL STONEWORK Porticos

In the XIX century, porticos were a frequent feature of houses for both aesthetic and practical reasons. Whilst providing welcome shelter from the elements, they also offered architects the opportunity to embellish an otherwise perhaps rather dull entrance, uplifting it to much grander proportions.

Today, the benefits and opportunities provided by utilising these architectural features are again being appreciated, for both public and private buildings.

The Haddonstone collection of porticos includes five designs using standard Haddonstone architectural elements. As can be seen from the photographs, it is often possible to combine individual elements to create a completely new design. An additional four components are also offered for use as individual entablature pieces.

Haddonstone also specialises in the manufacture of custom-made porticos to individual designs and requirements.

Note: The architrave will, in most cases, require backing with an in-situ reinforced concrete beam sufficient to carry the weight of the structure. Please ask for relevant Tech Sheet number for assembly recommendations.

For column details see pages 152-153.

TS CAD1 Column Assembly Details

Portico A

Portico A with M4 Columns, HN1 Steps and HN3 Risers Octagonal Portico A with HN1 Steps and HN3 Risers

154 Custom-made products are available on request. Refer to the Architectural Supplement for specific US designs. Portico A with M4 Columns, additional Plinth Block and Plain Parapet, Portico B with M4 Columns and Half Columns featuring Ionic Capitals, HN1 Steps and HN3 Risers HN1 Steps and HN3 Risers

317 (121⁄2")

675 (269⁄16")

330 (13") 578 (223⁄4")

1 470 (18 ⁄2") 317 (121⁄2")

2728 (1077⁄16")

2154 578 (8413⁄16") (223⁄4") 675 (269⁄16")

1 13 191 (7 ⁄2") 300 (11 ⁄16")

FRONT ELEVATION SIDE ELEVATION ENTABLATURE FRONT ELEVATION SIDE ELEVATION ENTABLATURE

Portico A Components Portico B Components

L110 Upper Cornice L200 Blocking (optional) L120 Lower Cornice L210 Upper Cornice L130 Architrave L220 Lower Cornice (with dentils) M7 Column L230 Architrave M4 Column (shown with Tuscan Capital) TS Tech Sheet No. PT10 for Portico A TS Tech Sheet No. PT20 for Portico B TS Tech Sheet No. PT11 for Portico A detail TS Tech Sheet No. PT21 for Portico B detail

1 Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. Custom-made products are available on request. 155 Portico E with L330 Architrave Portico D with HN1 Steps and HN3 Risers

470 (181⁄2")

641 (251⁄4")

305 (12")

2728 438 (171⁄4") 2438 (1077⁄16") (96") 641 (251⁄4") 470 (181⁄2")

13 300 (1113⁄16") 300 (11 ⁄16")

FRONT ELEVATION SIDE ELEVATION ENTABLATURE FRONT ELEVATION SIDE ELEVATION ENTABLATURE

Portico C Components Portico D Components

L310 Cornice L400 Blocking L330 Architrave L410 Cornice M5 Column (shown with Tuscan Capital) L430 Architrave M4 Column (shown with Tuscan Capital) TS Tech Sheet No. PT30 for Portico C TS Tech Sheet No. PT40 for Portico D TS Tech Sheet No. PT31 for Portico C detail TS Tech Sheet No. PT41 for Portico D detail

1 156 Custom-made products are available on request. Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. Portico A with M2 Columns. Custom Portico A with HN1 Steps and HN3 Risers.

Portico D, M7 Columns and Balustrading. Portico A with square M7 Columns. Portico C with M4 Columns.

Custom portico with special square columns and balustrading.

Custom portico with M4 Columns with HN1 Steps and HN3 Risers. 157 ARCHITECTURAL STONEWORK Porticos

Portico E with additional Blocking Course and M2 Columns M7 Columns with L130 Architrave, L120 Lower Cornice, L220 Dentilled Cornice and L110 Upper Cornice with HN1 Steps and HN3 Risers

L882 L866

603 (233⁄4") 114 (41⁄2") 300 305 (12") (1113⁄16") 250 80 (31⁄8") 247 (93⁄4") (913⁄16")

300 (1113⁄16") 445 (171⁄2")

2332 603 L864 3 (9113⁄16") (23 ⁄4") 381 (15") L862 108 (41⁄4") 102 (4") 127 (5")

243 (99⁄16") 508 (20")

330 (13") 565 (221⁄4") 191 (71⁄2")

FRONT ELEVATION SIDE ELEVATION ENTABLATURE

Portico E Components Note: L864 Cornice is suitable for carrying the Haddonstone Standard Balustrading Range (see pages 136 to 144). L510 Cornice Note: Haddonstone supply Steps and Risers for all Portico L530 Architrave and Door Surround designs. For Steps and Risers, see M7 Column page 169 for further information. TS Tech Sheet No. PT50 for Portico E

TS Tech Sheet No. PT51 for Portico E detail

1 158 Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. Custom-made products are available on request. M4 Columns on special Piers with L210 Upper Cornice, L220 Lower Cornice and L330 Architrave

Custom portico with FC balustrading, HN1 Steps and HN3 Risers

Portico A, HN1 Steps and HN3 Risers Special M4 Columns and Curved Entablature Half M7 Columns, L330/L410 Entablature

Pedimented Portico Portico E

159 ARCHITECTURAL STONEWORK Door SURROUNDS

Haddonstone can create a wide variety of door surrounds from standard architectural components including half columns, pilasters and entablatures. These designs are suitable for both interior and exterior applications. Please contact your nearest Haddonstone Technical Department to discuss your precise requirements.

Special door surrounds can be created using standard Haddonstone components

William Kent Door Surround Q200 with HN1 Step William Kent Door Surround Q200 William Kent Door Surround (with pediment) Q210

These designs by Haddonstone are in the style of the prolific early XVIII century architect William Kent, a great admirer of Inigo Jones and a protege of the architect Lord Burlington. William Kent’s sumptuous designs derived partly from the Italian Baroque and partly from Palladio.

Height overall (without pediment): 2640mm (104”) Height overall (with pediment): 3072mm (121”) 3 Maximum width (without pediment): 2000mm (78 ⁄4”) 3 Maximum width (with pediment): 2024mm (79 ⁄4”) 1 Height of opening: 2038mm (80 ⁄4”) 1 Width of opening: 924mm (36 ⁄2”) Weight (without pediment): 583kg (1285 lb) Weight (with pediment): 712kg (1570 lb)

William Kent Door Surround Q210 TS Tech Sheet No. DS10

160 For TecLite door surrounds see pages 184-185. Refer to the Architectural Supplement for specific US designs. ARCHITECTURAL STONEWORK BELVEDERE

Belvedere L9500

The Belvedere, inspired by the designs of Sir Charles Barry (1795-1860) for Queens Park, Brighton and Trentham Hall in Staffordshire, utilises standard Haddonstone architectural components including balustrading, columns, architrave and cornice. Square in plan, this impressive structure was first created for the 1998 Chelsea Flower Show.

1 Overall height: 3205mm (126 /4”) 3 Base width: 2193mm (86 /8”)

TS Tech Sheet No. T60 & T61

Custom-made products are available on request. 161 ARCHITECTURAL STONEWORK ORANGERIES

Orangeries built from cast stone are an exciting and original concept. Since launching at the Chelsea Flower Show in 2001, Haddonstone has created a range of half columns and pilasters in Doric, Ionic, Tuscan and Gothic styles specifically for this project.

The unique and refined architectural language of the orangery allows for the creation of buildings with great presence and style that are simply unavailable elsewhere.

Traditionally used to over-winter citrus fruits for grand county houses, today orangeries are seen as versatile structures functioning as pool houses, dining rooms, or simply as elegant living spaces. They can be either freestanding or connected to an existing property.

Haddonstone can also source joinery and glazing for all your conservatory and orangery requirements. For further information please contact your nearest Haddonstone office.

162 Custom-made products are available on request. Orangeries can be designed to meet your needs, with: five types of capital; three types of column and pilaster; numerous patterns of glazed joinery; and, perhaps most importantly, any size. Half Column Capitals

Tuscan Ionic

Doric

Half Octagonal Pilaster Capital Capital

Gothic Tuscan

Columns

Half Column Half Octagon Tuscan Pilaster

163 ARCHITECTURAL STONEWORK PAVILIONS

“… at the ends and extremities of a park are beautiful pavilions of masonry, which the French call belvederes, or pavilions of Aurora, which are as pleasant to rest oneself in, after a long walk, as they are to the eye, for the handsome prospect they yield; they serve also to retire into for shelter when it rains.” Anon, XVIII century Venetian Folly L9400

The Venetian Folly, unveiled at the Chelsea Flower Show in 1990, has the classical proportions of a Serlian window, combining the use of Tuscan columns, pedimented arch, quoins and optional balustrading.

TS Tech Sheet No. T50 for L9400

TS Tech Sheet No. T51 for L9400 Detail

TS Tech Sheet No. T52 for L9400 Detail

TS CAD1 Column Assembly Details Venetian Folly L9400

5176 (2033⁄4")

Ø1275 (503⁄16")

27.5°

4184 (1643⁄4")

2620 (1031⁄8")

7 4728 (186 1⁄8") 3186 (125 ⁄16") As required to o.s. rail FRONT ELEVATION SIDE ELEVATION

1 164 Custom-made products are available on request. Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. Image: Charles Hawes

Pavilion L9300

The pavilion is based on our M7 Tuscan Column series and can easily be adapted for use as a portico. Please note that the pediment 1 can be supplied in the standard 20°, 27 ⁄2° or 30° pitch. Flooring and steps can be supplied to individual requirements. See pages 178 to 181. TS Tech Sheet No. T40 for L9300 TS Tech Sheet No. T41 for L9300 Detail TS Tech Sheet No. T42 for L9300 Detail TS CAD1 Column Assembly Details

Pavilion L9300

1164 20°20° (4513⁄16")

2332 (9113⁄16")

3634 (1431⁄16")

FRONT ELEVATION SIDE ELEVATION

1 Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. 165 ARCHITECTURAL STONEWORK tEMPLES

Glass fibre domes are available in a lead-effect finish for L9000 (X510A), L9100 (X510B), L9250 and L9200 (X510C) temples. These are supplied in sections for assembly on site.

For Temple Flooring, see page 168. For Temple Flooring, see page 168.

WX5150 Wrought Iron Dome for L9000 Temple. Other sizes also available.

TS Tech Sheet No. T10 & T11 TS Tech Sheet No. T20 & T21 TS CAD1 Column Assembly Details TS CAD1 Column Assembly Details

For Temple Flooring, see page 168. For Temple Flooring, see page 168.

Large Classical Temple L9100 with non-standard dome and HN6006 floor.

TS Tech Sheet No. T30 & T31 TS Tech Sheet No. T30 & T31 TS CAD1 Column Assembly Details TS CAD1 Column Assembly Details Balustraded Temple L9000 with Dome X510A and custom floor.

1 166 Custom-made products are available on request. Dimensions exclude joints. Allow 6mm ( ⁄4”) for joints. Temples should not be regarded as mere buildings but as classical ornaments, best viewed from afar at the end of a vista or cresting a rise. They are essentially frivolous and mood-evoking, often intended for no other purpose than to enliven the senses. Wherever one finds them, temples should be just this, or more. Small Classical Temple L9250 with X510C Dome and HN6005 Floor. For Piper Statue, see page 78. 167 ARCHITECTURAL STONEWORK Temple FLOORING

Temple Flooring

Available for Balustraded, Small Classical and Large Classical Temples. Stepped Temple Floors are available for Small and Large Classical Temples. Produced in TecStone cast stone as standard.

TS Tech Sheet No. T25 for Stepped Flooring

TS Tech Sheet No. T35 for Flooring

ARCHITECTURAL STONEWORK PERGOLA

Pergola L900

Designed for the M7 Tuscan Column range. Can be supplied for column spacings of up to 1829mm (72”) centres.

TS Tech Sheet No. PG10

TS CAD1 Column Assembly Details

168 M7 Columns have been used to create a spectacular poolside pergola at Haddonstone’s acclaimed show gardens in Northamptonshire.

169 ARCHITECTURAL STONEWORK RUINS, FOLLIES & GROTTOES

“Mood, association, magic: these are indeed the essence of follies” Gervase Jackson-Stops, 1989

Ruins, follies and grottoes were in vogue for a considerable period of the XVIII and XIX centuries: valued for their aesthetic, emotional and romantic qualities.

Using standard architectural and ornamental components from the Haddonstone collection it is possible – with flair and imagination – to design and construct picturesque structures in the style of the antique.

Based on the L9300 Pavilion, this ruinous folly has been constructed in the City of Westminster, Colorado, USA.

Folly from Haddonstone’s 1995 Chelsea exhibit rebuilt in a London garden. Landscaping by Notcutts A private garden in the West Midlands features this ruinous Venetian Folly. Folly featuring L9605 Gothic Arch at a private Northamptonshire home.

170 Custom-made products are available on request. Inspired by the works of Piranesi, Haddonstone’s 2003 Chelsea Show Garden used standard designs to recreate an evocative scene of Roman antiquity.

Haddonstone’s Northamptonshire showgarden features this Gothic Grotto. Triumphal arch created for Nanatsudo Park in Mito City, Japan.

This Gothic folly enhances the grounds of a private residence in Suffolk. Intriguing water feature with Grotesque Masks and Fontainebleau Fountain.

Custom-made products are available on request. 171 ARCHITECTURAL STONEWORK HEADS, SILLS, KEYSTONES & window surrounds

Window Heads 21215 5 215 7 7 7 R1R1 HEAD HEADR1 HEADPLAIN PLAIN PLAINEND END END (8(8⁄⁄16⁄")16")(8 ⁄16") Our standard designs – R1, plain-ended or tapered; R2, plain-ended with integral keystone; and R3, tapered with integral keystone – suit 100100 100 LENGTHSLENGTHSLENGTHS TO TO SUIT SUIT TO STANDARD SUIT STANDARD STANDARD 100100 100 15 15 (3(315⁄15⁄16⁄")16(3")15⁄16") (3(315⁄15⁄16⁄")16(3")15⁄16") 102102 (4") (4")102 (4") BRICKBRICKBRICK OPENINGS OPENINGS OPENINGS - SEE- SEE TABLE- TABLESEE TABLE a three-brick course height in a normal cavity-wall situation. They are available to suit the following British Standard brick openings:

215 21215 5 215 R1R1 HEAD HEADR1 HEADTAPERED TAPERED TAPERED END END END R1, R2, R3 7 167 7 (8(8⁄⁄16⁄")16")(8 ⁄16") 1 13 1 3 460mm (18 ⁄8”) 910mm (35 ⁄16”) 1248mm (49 ⁄8”) 1585mm (62 ⁄8”)* 15 11 9 1 685mm (26 ⁄16”) 1135mm (44 ⁄16”) 1360mm (53 ⁄16”) 1810mm (71 ⁄4”)* 100100 100 LENGTHSLENGTHSLENGTHS TO TO SUIT SUIT TO STANDARD SUIT STANDARD STANDARD 100100 100 1515 15 1515 15 (3(3⁄⁄16⁄")16(3") ⁄16") BRICKBRICKBRICK OPENINGS OPENINGS OPENINGS - SEE- SEE TABLE- TABLESEE TABLE (3(3⁄⁄16⁄")16(3") ⁄16") 102102 (4") (4")102 (4") *Only supplied as a two-piece head, left-hand end of R2 and R3

7 215215 (8 (87⁄⁄215167⁄")16") (87⁄16") incorporating keystone.

Please note that other head sizes can be manufactured to order. 21215 5 215 7 R2/R3R2/R3 R2/R3HEAD HEAD HEADWITH WITH INTEGRALWITH INTEGRAL INTEGRAL KEYSTONE KEYSTONE KEYSTONE (8(87⁄⁄167⁄")16")(87⁄16") Supporting lintels must be used as these window heads are not structural members. 15 150150 (5 (5151⁄15⁄1650⁄")16 (5")15⁄16")

2020 20 100100 100 LENGTHSLENGTHSLENGTHS TO TO SUIT SUIT TO STANDARD SUIT STANDARD STANDARD 100100 100 We strongly recommend that you refer to Eurocode 6 and PD 6697: 2010. 13 1515 15 1515 15 (13(⁄13⁄16⁄")16")(13⁄16") (3(3⁄⁄16⁄")16(3") ⁄16") (3(3⁄⁄16⁄")16(3") ⁄16") 102102 (4") (4")102 (4") BRICKBRICKBRICK OPENINGS OPENINGS OPENINGS - SEE- SEE TABLE- TABLESEE TABLE PLANPLANPLAN Window Sills

Our three standard designs suit one or two-brick course heights in a normal cavity-wall situation. They are available in the following lengths to suit British Standard brick openings:

P1 P2/P9 1 1 1 1 460mm (18 ⁄8”) 1248mm (49 ⁄8”)* 460mm (18 ⁄8”) 1248mm (49 ⁄8”) 15 9 15 9 685mm (26 ⁄16”) 1360mm (53 ⁄16”)* 685mm (26 ⁄16”) 1360mm (53 ⁄16”)* 13 3 13 3 910mm (35 ⁄16”) 1585mm (62 ⁄8”)* 910mm (35 ⁄16”) 1585mm (62 ⁄8”)* 11 1 11 1 1135mm (44 ⁄16”)** 1810mm (71 ⁄4”)* 1135mm (44 ⁄16”) 1810mm (71 ⁄4”)*

15 Note: Dimensions exclude stooling - maximum 100mm (3 ⁄16”) at each end.

*Only supplied as a two-piece sill.

* *One-piece only when supplied without stools.

Please note that other sill sizes can be manufactured to order.

We strongly recommend that you refer to Eurocode 6 and PD 6697: 2010, and our Tech Sheet M90/TS for installation recommendations. R3 Head with P2 Sill Q920 Keystone TS Tech Sheet No. M90 Keystones

We have three standard designs: Q900A, Q910A and Q920A. Please note that other keystones can be manufactured to individual WINDOWWINDOWWINDOW CILL SILLSCILL SCILLS S

15 1515 15 requirements. 100100 (3 (315100⁄15⁄16⁄")16 (3")LENGTHS15LENGTHS⁄16") LENGTHS TO TO SUIT SUIT TO STANDARD SUIT STANDARD STANDARD100100 (3 (3100⁄⁄16⁄")16 (3") ⁄16") BRICKBRICKBRICK OPENINGS OPENINGS OPENINGS - SEE- SEE TABL- TABLSEEE TABLE E 150150 150 15 (5(515⁄15⁄16⁄")16(5")15⁄16") KEYSTONESKEYSTONESKEYSTONES 7 1 276276 (10 (102767⁄⁄87")⁄8 ")(107⁄8") 281281 (11 (112811⁄⁄161⁄")16 (11") 1⁄16") 1 1 1 230230 (9 (9⁄⁄23016⁄")16") (9 ⁄16") 1 1 1 P1/P2 PLAN 102102 (4") (4")102 (4") 230230 (9 (9⁄⁄23016⁄")16") (9 ⁄16") P1/P2P1/P2 P1/P2PLAN PLAN PLAN 15150 0 150 7 1515 15 Q910Q910Q910 7 87 7 7 87 7 (5(5⁄⁄16⁄")16(5") ⁄16") Q900Q900Q900 6565 65200200 (7 (7⁄⁄2008")⁄8") (7 ⁄8") 14140 0 200142000 (7 (7200⁄⁄8")⁄8") (7 ⁄8") 14140 0 140 Q920Q920Q920 9 9 9 1 1 1 1 1 1 345345 345 (2(2⁄⁄16⁄")16")(2 ⁄16") (5(5⁄⁄2")⁄2")(5 ⁄2") (5(5⁄⁄2")⁄2")(5 ⁄2") 310310 310 9 9 9 10100 0 100 10100 0 100 5050 50 3 3 3 (13(13⁄⁄16⁄")16(13") ⁄16") 290290 290 1515 15 1515 15 (12(12⁄⁄16⁄")16(12") ⁄16") 7 7 7 (3(3⁄⁄16⁄")16(3") ⁄16") (3 1616 16 (2")(2") (2") (11(11⁄⁄16⁄")16(11") ⁄16") (3(3⁄⁄ ⁄")(3") ⁄ ") P1P1 P1 P2P2 P2 P9P9 P9 1 2525 25 1212 (1 ⁄⁄(21")⁄212") (1⁄2") 4040 40 3 3 3 1515 15 1111 11 (1")(1") (1") 1 1 1 9 120120 (4 (4⁄1⁄420")⁄4") (4 ⁄4")15150 0(5 (515⁄⁄160⁄")16 (5") ⁄16") 220220 (8 (8220⁄⁄16⁄")16 (8") ⁄16") 10102 2(4") (4")102 (4")12128 8(5 (512⁄⁄16⁄")168 ")(5 ⁄16") (1(19⁄⁄169⁄")16")(19⁄16") 10100 0 100 10100 0 100 15 1515 15 TecLite Quoin TLQ920 (3(315⁄15⁄16⁄")16(3")15⁄16") (3(3⁄⁄16⁄")16(3") ⁄16") also available. SECTION SECTION SECTION Thickness 25mm (1”). SECTIONSECTIONSECTION SECTIONSECTIONSECTION SECTIONSECTIONSECTION

172 Custom-made products are available on request. TecLite Heads and Sills also available, see page 183 Window Surrounds

Haddonstone has a range of classical window surrounds which can be tailored to suit individual requirements. These surrounds, based on the Tuscan style, can be used for new build or refurbishment.

Haddonstone will always continue to create custom-made surrounds, either to an architect’s drawing or to match an existing design. Please WS6 Window Surround contact your nearest Technical Department for further information.

We strongly recommend that you refer to Eurocode 6 and PD 6697: 2010.

WS6 (SECTION) WS3/6

272 (1011⁄16")

WS4/7

WS2/5

WS5/6/7

WS1

1 230 (9 ⁄16")

Bull’s-Eye Window Surrounds

Offered in addition to Haddonstone’s standard range of surrounds, Bull’s-Eye windows are available in three standard styles, as illustrated below: WS2 Window Surround

890 (35") 166 (61⁄2") 130 (51⁄8")

215 (87⁄16")

96 110 (45⁄16") (33⁄4") 610 (24") 610 (24")

140 (51⁄2")

122 (413⁄16")

WS10 WS11 WS12 WS11 (SECTION)

Refer to the Architectural Supplement for specific US designs. TecLite Window Surrounds also available, see page 183. Custom-made products are available on request. 173 ARCHITECTURAL STONEWORK PLINTHS, STRING COURSES & DETAILS

Plinth Courses String Courses

The five standard designs illustrated are available in lengths shown Five standard designs are available in lengths shown in the price list.

in the price list. Plinth courses can also be produced to individual String courses15 can also be produced to individual requirements. 102 (4") 106 (43⁄16") 102 (4") 177 (6 ⁄16") 102 (4") 48 102 (4") requirements. The Q540 plinth course matches the S120G pier base. (17⁄8") 9 Q530 Q350 Q370 Q450 65 (2 ⁄16") 140 3 Q540 15 142 140 17kg/m102 (4") 102 (4")36kg/m 106 (4 ⁄16") 172 102 (4")Q571 177 (6 ⁄16")37kg/m 9 102 (4")33kg/m 1 48 (51⁄2") 64kg/m (5 ⁄16") (5 ⁄2") (63⁄4") 215 (25 lb/ft) 7 (11 lb/ft) (24 lb/ft) 53kg/m 1 (22 lb/ft) (1 ⁄8") (43 lb/ft) (8 ⁄2") 5 110 (4 ⁄16") (36 lb/ft) 9 Q530 Q350 Q370 Q450 65 (2 ⁄16") 140 Q540 142 140 17kg/m 36kg/m 5 172 Q571 37kg/m 19 33kg/m127 (5") 1 135 (5(5⁄116⁄2")") 64kg/m 114 (4(5 ⁄⁄216")") (5 ⁄2") 3(63⁄4") 215 (25 lb/ft) (11 lb/ft) (24 lb/ft) 183 (7 ⁄16") 53kg/m 1 (22 lb/ft) (43 lb/ft) (8 ⁄2") 5 (36 lb/ft) 110 (4 ⁄16") 127 (5") 102 (4") 102 (4") 102 (4") 220 (811⁄16") 5 135 (5 ⁄16") 114 (41⁄2") 127 (5") 3 183 (7 ⁄16") Q400 Q570 100 140 127 (5") 34kg/m 15 102 (4") 102 (4")34kg/m 102 (4")Q371 220 (811⁄16") (3 ⁄16") Q560 215 (51⁄2") 215 (23 lb/ft) (23 lb/ft) 52kg/m 7 49kg/m (81⁄2") (8 ⁄16") (33 lb/ft) (35 lb/ft) Q400 Q570 138 (57⁄16100") 140 34kg/m 15 34kg/m127 (5") Q371 (3 ⁄16") Q560 (51⁄2") 215 (23 lb/ft) 215 (23 lb/ft) 52kg/m 49kg/m 1 (87⁄16") (8 ⁄2") (35 lb/ft) (33 lb/ft) 5 135 (5 ⁄16") 127 (5") 138 (57⁄16") 127 (5")

135 (55⁄16") 127 (5")

House gable showing special vent, corbels and copings.

Hood Mould Q250 Gable Vent Q680

Hood moulds can be made for This architectural feature is both new and restoration work. normally used in the gable end This hood mould has been of a house. designed to suit British Standard nominal brick size including joint 22 (7⁄8") of 225mm x 112.5mm x 75mm 113 (47⁄16") 1536 (601⁄2") 113 (47⁄16") 7 7 15 7 (8 ⁄8” x 4 ⁄16” x 2 ⁄16”) and can 22 ( ⁄8") be supplied in maximum 865mm 113 (47⁄16") 1536 (601⁄2") 113 (47⁄16") 225 1 7 (34 ⁄16”) lengths to fit any (8 ⁄8") 295 515 5 structural opening. 85 105 140 (11 ⁄8") (201⁄4") 3 1 (3 ⁄8") (41⁄8") 225 (5 ⁄2") (87⁄8") Supporting lintels must be used 295 515 15 5 1 as these hood moulds are not 25 (1")85 105 253 (9140⁄16") (11 ⁄8") (20 ⁄4") 3 1 Q250 1 (3 ⁄8") (4 ⁄8") (5 ⁄2") structural members. 41kg/m 140 (51⁄2") (28 lb/ft) 15 16 25 (1") 253 (9 ⁄ ") 150 (515⁄16") 215 (87⁄16") Q250 140 41kg/m 1 (57⁄162") (28 lb/ft112) (4 ⁄ ") Weight: 31kg (68 lb)

150 (515⁄16") 215 (87⁄16")

112 (47⁄16") Weight: 31kg (68 lb)

174 Custom-made products are available on request. Refer to the Architectural Supplement for specific US designs. ARCHITECTURAL STONEWORK BRACKETS, CORBELS & QUOINS

3 5 Brackets & Corbels Q710 152kg (335 lb) Q720 35kg (77 lb) 552 (21 ⁄4") 215(8 ⁄8") 13 5 7 7 224 (8 ⁄16") 415 (16 ⁄16") 174 (6 ⁄8") 175 (6 ⁄8") Haddonstone’s range of Q790 standard brackets and corbels 5 43kg (95 lb) 215(8 ⁄8") can be applied as decorative features below cills, ledges,

1 balconies, parapets and any 337 (13 ⁄4") 840 1 7 7 other projecting element. (33 ⁄16") 327 (12 ⁄8") 215(8 ⁄16") Where our standard designs Q781 140 do not match your requirements, 1 1365 18kg (40 lb) (5 ⁄2") 3 we can produce custom-made (53 ⁄4") stonework to order. 5 237 (9 ⁄16")

1 9 1 357 (14 ⁄16") 268 (10 ⁄16") Please note that attention must 260 (10 ⁄4") 15 102 (4") 100 (3 ⁄16") be given to the damp-proofing 7 98 (3 ⁄8") Q740 detail where a bracket or corbel 352 49kg (108 lb) 7 (13 ⁄8") 5 bridges a cavity wall. 215 (8 ⁄8")

1 9 Q750 7kg (15 lb) 190 (7 ⁄2") 90 (3 ⁄16")

Q110 Quoins Q180 Quoins Q790 Corbel Quoins

Haddonstone has a range of standard designs to suit most applications. Custom-made designs available on request. Q110 weight: 37kg (81 lb)

Q100 Quoins 219 219 219 215 215 Q120 5 Q100 5 Q110 5 Q170 7 Q180 7 (8 ⁄8") (8 ⁄8") (8 ⁄8") (8 ⁄16") (8 ⁄16")

13 1 2 7 ( ⁄ ") 7 352 (13 ⁄8") 228 (9") 215 (8 ⁄16")

1 3 7 464 (18 ⁄4") 340 (13 ⁄8") 327 (12 ⁄8")

PLAN FOR Q120 PLAN FOR Q100 PLAN FOR Q110 PLAN FOR Q170 PLAN FOR Q180

1 115 (4 ⁄2") 102 (4") 127 (5") 352 352 352 7 7 7 (13 ⁄8") (13 ⁄8") (13 ⁄8") 215 228 (9") 7 (8 ⁄16") 13 25 (1") 25 (1") 1 ( ⁄2") 1 1 3 7 433 (17 ⁄16") 332 (13") 127 (5") 464 (18 ⁄4") 340 (13 ⁄8") 327 (12 ⁄8") 25 (1") 1 464 (18 ⁄4") Refer to the Architectural Supplement for specific US designs. TecLite Quoin also available, see page 183. Custom-made products are available on request. 175 ARCHITECTURAL STONEWORK ROUNDELS & PLAQUES

The roundels and plaques illustrated have been specially commissioned by clients. We would be pleased to quote for your individual requirements.

Gothic Roundel Q620 Surround Q621 Rose Roundel Q640 Swagged Q650 1 1 Internal diameter: 445mm (17 /2”) Diameter: 595mm (23 ⁄2”) Diameter: 432mm (17”) A date can be incorporated within 1 1 15 Thickness: 115mm (4 ⁄2”) External diameter: 625mm (24 ⁄2”) Thickness: 100mm (3 /16”) 7 this design at additional cost. Weight: 31kg (68 lb) Thickness: 200mm (7 /8”) Weight: 36kg (79 lb) Weight: 21kg (46 lb) Diameter: 785mm (31”) 1 Image above shows Q620/Q621 Thickness: 110mm (4 ⁄2”) Weight: 84kg (185 lb)

Custom-made name plaque. Custom-made name plaque for the entrance to Seaham Hall Hotel in County Durham

Circular Q625 Surround Q621 Rectangular Q630 Plaque TLQ635

1 A date or letters can be Internal diameter: 445mm (17 /2”) Date or letters can be cast in. Haddonstone is now able to 1 incorporated within this design. External diameter: 625mm (24 /2”) 5 offer retro-fit house number Length: 440mm (17 ⁄16”) 7 Thickness: 200mm (7 /8”) 7 plaques. Diameter: 432mm (17”) Height: 290mm (11 ⁄16”) Weight: 21kg (46 lb). 7 Thickness: 102mm (4”) Thickness: 102mm (4”) Length: 200mm (7 ⁄8”) 3 Weight: 30kg (66 lb). Image below shows Q625/Q621 Weight: 26kg (57 lb) Height: 120mm (4 ⁄4”) 5 Thickness: 16mm ( ⁄8”) 1 Weight: 650g (1 ⁄2 lb)

For ornamental plaques see page 115-116. 176 Custom-made products are available on request. CLADDING & RAIN SCREEN CLADDING

In recent years, Haddonstone has gained an increasing reputation for the custom-manufacture of blocks for cladding and rain screen cladding. Examples can be seen on this page. Designers, developers and private clients are encouraged to contact their nearest Haddonstone office to discuss any appropriate projects.

Londonderry city centre features extensive cladding by Haddonstone. Cladding with cast-in quotations at Wimbledon High School Rutherford Centre.

Apartments in Northampton town centre featuring Haddonstone cladding. Rain screen cladding at Seaham Hall Hotel and Serenity Spa.

Cladding in Nottingham City centre. Extensive use of custom cladding for prominent fast-food outlet in Bridlington. Cladding on a New York Development.

177 ARCHITECTURAL STONEWORK FLOORING & PAVING

Haddonstone offers a range of flooring and paving designs for interior and exterior use. Weight: 89kg per m2 (18 lb per ft2)

For interior use, the conservatory and orangery flooring ranges are etched and a seal applied at our manufactory before dispatch. Both then require sealing by the client after installation.

Like quarried stone, Haddonstone can exhibit slight shade variations from piece to piece, reflecting the colour of the natural materials used in the production process.

Orangery Flooring

Suitable for indoor use. A traditional Victorian-style flooring system which can be seen to best effect if ordered in contrasting colours as shown above.

1 1 1 HN750A / HN755A: 394 x 394 x 38mm (15 /2” x 15 /2” x 1 /2”) 1 HN750B: 102 x 102 x 38mm (4” x 4” x 1 /2”) Conservatory Flooring

Suitable for indoor use. Standard sizes can be combined to create many different patterns. HN750D HN750B

13 13 HN722A: 300 x 300 x 25mm (11 /16” x 11 /16” x 1”) HN750A HN755A 3 3 HN725A: 450 x 450 x 25mm (17 /4” x 17 /4” x 1”) 3 7 HN750C HN750B HN726A: 450 x 225 x 25mm (17 /4” x 8 /8” x 1”)

For exterior applications, see Smooth Paving on page 179.

1 394mm (15 /2") 394mm (151/2")

178 Custom-made products are available on request. For Temple Fooring see page 168. For Steps and Rsers see page 181. ARCHITECTURAL STONEWORK PAVING

Textured Paving HN800/HN801/HN805

Haddonstone manufactures a range of paving with a subtle texture which is available in the following sizes:

HN800A: 600 x 600 x 38mm 5 5 1 (23 /8” x 23 /8” x 1 /2”)

HN801A: 600 x 300 x 38mm 5 13 1 (23 /8” x 11 /16” x 1 /2”)

HN802A: 300 x 300 x 38mm 13 13 1 (11 /16 x 11 /16 x 1 /2”)

HN805A: 450 x 450 x 38mm 3 3 1 (17 /4” x 17 /4” x 1 /2”)

Riven Paving HN855 Haddon Pavers HN870/HN871

Customers can achieve a random effect by alternating the grain Haddonstone offers simple paver-style blocks that can be used to direction. In addition to the standard colours, Riven Paving is also compliment the company’s various paving ranges. available in York colour as shown above. Available in one size only: These are only available in two special colours: Brindle Red -10 (top) 3 3 1 Size: 450 x 450 x 38mm (17 /4” x 17 /4” x 1 /2”) and Brindle Blue -11 (bottom), as illustrated, in the following sizes:

1 15 1 HN870A: 210 x 100 x 38mm (8 /4” x 3 /16” x 1 /2”) 1 9 1 HN871A: 210 x 65 x 38mm (8 /4” x 2 /16” x 1 /2”) Smooth Paving

Suitable for exterior use. Standard sizes can be combined to create General Note: Paving many different patterns, see photograph page 180. A well-laid foundation is essential for effective and lasting results. A fall of at For interior applications, see Conservatory Paving on page 178. least 1 in 60 is recommended. For a clean architectural appearance, the joints can be mortar-pointed. For a softer, natural appearance, paving should be laid 5 5 1 HN700A: 600 x 600 x 38mm (23 /8” x 23 /8” x 1 /2”) edge to edge, unpointed, with sand brushed into the joints. This method also 5 13 1 HN701A: 600 x 300 x 38mm (23 /8” x 11 /16” x 1 /2”) facilitates drainage. Cement and mortar stains are difficult to remove from paving 13 13 1 HN702A: 300 x 300 x 38mm (11 /16” x 11 /16” x 1 /2”) so extreme care must be taken to keep surfaces clean. Four clear days should 3 3 1 HN705A: 450 x 450 x 38mm (17 /4” x 17 /4” x 1 /2”) be allowed to elapse after construction before foot traffic is allowed over all laid 3 7 1 HN706A: 450 x 225 x 38mm (17 /4” x 8 /8” x 1 /2”) areas. For vehicular traffic, special laying instructions are available on application.

179 ARCHITECTURAL STONEWORK PAVING & STEPS

Haddonstone’s standard paving and steps can be used to great effect in numerous garden and landscape applications.

Custom sizes can be created to meet customer requirements or the slabs can be cut on site by professional contractors.

Smooth Paving in custom sizes at the Army Air Corps Memorial, Hampshire. HN1 Treads with HN3 Risers. Terracotta coloured HN1 Treads with HN3 Risers.

180 Steps Spiral Steps

IMPORTANT: Haddonstone Haddonstone has introduced steps must be continuously a spiral staircase that is both bedded. simple and elegant.

Treads are available, as With the riser and locating ring standard, in a plain bull nose or being an integral part of each 11 a moulded design as shown, in 450 (17 ⁄16")max step, a complete staircase can 1 3 38 (1 ⁄2") lengths of 1000mm (39 ⁄8”) and HN1 provide a functional design in standard widths of 300mm 50 (2") solution for both traditional 13 3 (11 ⁄16”), 375mm (14 ⁄4”) and HN3 risers to suit and contemporary projects. 11 450mm (17 ⁄16”). These treads Principally designed for interior can be supplied with mouldings use, the steps are available in 1 returned to left or right-hand 50 (2") widths up to 1200mm (47 /4”).

11 ends. Square-edged risers are 450 (17 ⁄16")max We strongly recommend that also available to suit. We have 1 38 (1 ⁄2") a range of curved treads and HN2 professional advice is taken 1 63 (2 ⁄2") risers to meet individual to ensure that any proposal requirements. HN3 risers to suit is designed to be structurally sound. For further information Treads and risers are produced please contact your nearest in TecStone as standard. 50 (2") Haddonstone office.

HN1 Treads with HN3 Risers.

HN1 Treads with HN3 Risers.

181 ARCHITECTURAL STONEWORK TECLITE

Haddonstone has launched a revolutionary material called TecLite.

Although TecLite closely resembles traditional cast stone and natural stone in appearance, the use of thin wall construction and GRC/GFRC technology means the component weight is reduced by approximately two thirds when compared with similar Haddonstone pieces.

TecLite is a cement based material containing drawn glass fibre (Glass Fibre Reinforced Concrete) which benefits from a high strength to weight ratio. TecLite is, therefore, ideal for retro-fit, timber-frame and new build projects where component weight is an issue. TecLite is also used for the production of some garden and landscape ornaments.

TecLite products can be used in conjunction with standard Haddonstone architectural components as the colours are complementary. Consequently, users can incorporate both Haddonstone and TecLite components in the same project with absolute confidence. TecLite products can be used to achieve the same crisp detailing normally only associated with Haddonstone designs. Before:

After: TecLite has been used extensively at this Leicestershire residence – completely transforming the exterior of the property.

Standard TecLite designs for interiors and exteriors include:

l Door Surrounds l String Courses, Plinth Courses, Quoins and Blocks l COLUMNS, Half Columns and Pilasters l Window Surrounds, Cills, Heads and Keystones l Entablatures and Pediments l Custom-made designs to individual specifications l Copings and Parapet Copings l GARDEN AND LANDSCAPE ORNAMENTS

182 11 373 (14 /16")

100 15 75 (3 /16") 15 (2 /16") ARCHITECTURAL STONEWORK 35 35 3 3 TECLITE DETAILS &(1 /D8") RESSINGS (1 /8")

1 283 (11 /8") CAPPINGS

11 11 373 (14 /16") 373 (14 /16")

25 (1") 100 15 75 15 (3 /16") 15 75 (2 /16") (2 /16")

35 35 35 35 3 3 3 3 (1 /8") (1 /8") (1 /8") (1 /8")

1 1 283 (11 /8") 283 (11 /8")

TLT390 TLT790

11 24kg/m373 (1 4(16/16 ")lb/ft) 23kg/m (15 lb/ft)

25 (1") TLT395 TLT795 1 1 2 2 15 As TLT390 except 393mm (15 / ”) As TLT790 except 393mm (15 / ”) 75 (2 /16") 15 15 width to suit 303mm (11 /16”) wall width to suit 303mm (11 /16”) wall 25kg/m (17 lb/ft) 24kg/m (16 lb/ft) 35 35 3 3 (1 /8") (1 /8") ARCHITECTURAL ENTABLATURES 1 283 (11 /8")

DETAILS 1 255 (10 /16") 330 (13")

Dentilled 255 (10 1/16") 330 (13") Cornice

3 TLL215 311 (12 /16") 253 (10") 50kg/m 3 311 (12 /16") 253 (10") Block TLP450 (34 lb/ft) 350 (13 3/4") 3 String TLQ375 310 (12 /16") 350 (13 3/4") 310 (12 3/16")

Cornice 60 (23/8")

3 260 (10 1/4") TLL310 60 (2 /8")

260 (10 1/4") 50kg/m (34 lb/ft) WINDOWS HEADS & CILLS Plinth TLQ575 Haddonstone is able to offer a comprehensive range of window heads and cills in TecLite. Window surrounds are also available. For further 255 (10 1/16") information please contact your nearest Haddonstone office. 330Block (13") TLP450 Cornice 444 x 219 x 20mm TLL510 1 5 3 (17 /2” x 8 /8” x /4”) 39kg/m 219 TLQ120 5 Weight: 4kg (9 lb). (8 c8") 3 253 (10") (27 lb/ft) QUOIN 311 (12 /16") Surface-Fixed Quoin TLQ120 String TLQ375 3 Architrave 894 x 144 x 40mm 350 (13 /4") 310 (12 3/16") Weight: 9kg/course (20 lb/course). 1 11 9 TLL450 (35 /4” x 5 /16” x 1 /16”) PLAN FOR TLQ120 Weight: 10kg/metre (7 lb/ft). (for use in 60 (23/8") conjunction with TLL215, 260 (10 1/4") 219 Plinth TLQ575 TLQ120 5 (8 c8") 352 TLL310 and 7 (13 c8") 894 x 144 x 40mm TLL510). 1 11 9 (35 /4” x 5 /16” x 1 /16”) 15kg/m 1 Weight: 10kg/metre (7 lb/ft). 433(17 c16") 25 (1") (10 lb/ft)

PLAN FOR TLQ120 183

352 7 (13 c8")

1 433(17 c16") 25 (1") ARCHITECTURAL STONEWORK TECLITE DOOR SURROUNDS

Standard Jamb Feature Jamb Fluted Jamb Canopy Head TLQ309 TLQ310 TLQ311 TLQ303

Weight: 36kg (79 lb) Weight: 36kg (79 lb) Weight: 36kg (79 lb) Weight: 80kg (176 lb) TLQ309B for left (shown) TLQ310B for left (shown) TLQ311B for left Can be used with TLQ309, TLQ309C for right TLQ310C for right TLQ311C for right TLQ310 and TLQ311

Standard Feature Canopy Head TLQ303 Jamb Jamb TLQ309 TLQ310

Fluted Jamb TLQ311

TS Tech Sheets available. 1 184 All Jambs supplied as shown - 615mm (24 /4”) plinth section can be cut to form shorter jambs as required. Installation kits available. ARCHITECTURAL STONEWORK TECLITE DOOR SURROUNDS

Fluted Jamb TLQ311

Weight: 36kg (79 lb) TLQ311B for left TLQ311C for right

Canopy Head TLQ302

Weight: 44kg (97 lb) Can be used with TLQ309,

15 15 TLQ310 and TLQ311 2107 (822107⁄16”) (82 ⁄16”) 15 15 304 (11304⁄16”) (11 ⁄16”) 3 3 3 3 1051 (411051⁄8”) (41 ⁄8”) 1051 (411051⁄8”) (41 ⁄8”)

3 3 234 (9 ⁄16234”) (9 ⁄16”)

3 3 350 (13350⁄4”) (13 ⁄4”) 1625 (64")1625 (64")

Canopy Head TLQ302 203 (8”)203 (8”) ”) ”) 16 16 ⁄ ⁄ 9 9 COMPONENTCOMPONENT LISTING LISTING

TLL115B/CTLL115B/C Cornice Cornice

7 7 3139 (123 3139 (123 TLL130TLL130 Architrave Architrave 1942 (761942⁄16”) (76 ⁄16”) TLM750MTLM750M Tuscan Tuscan Capital Capital TLM751BTLM751B Pilaster Pilaster Long Shaft Long Shaft TLM751FTLM751F Pilaster Pilaster Base Base

Fluted Jamb TLQ311

3 3 390 (15390⁄8”) (15 ⁄8”)

9 9 1005 (391005⁄16”) (39 ⁄16”) 1 1 133 (5 ⁄4133”) (5 ⁄4”) 5 5 1405 (551405⁄16”) (55 ⁄16”) ElevationElevation SectionSection

Door Surround TLQ320

Total weight: 220kg (485 lb)

IMPORTANT NOTICE: Canopy Heads TLQ301, TLQ302 and TLQ303 are interchangeable. Each has been designed to be used in conjunction with Jambs TLQ309, TLQ310 and TLQ311. 185 186 Fine garden ornaments and architectural stonework

Haddonstone Ltd, The Forge House, East Haddon, Northampton NN6 8DB, England. Telephone: 01604 770711 Fax: 01604 770027 [email protected]

Haddonstone (USA) Ltd, Telephone: 856 931 7011 Fax: 856 931 0040 [email protected]

Haddonstone (USA) Ltd, 32207 United Avenue, Pueblo, CO 81001, USA. Telephone: 719 948 4554 Fax: 719 948 4285 [email protected] www.haddonstone.com Fine garden ornaments and architectural stonework

ISBN: 978-0-9563891-2-1 Issue date: January 2015