THE Product Line Steel Structural Fittings

Product Descriptions Access Ramp Railing For quickly assembling Steel pipe is an inherently efficient structural component. It is all types of ramp railing, strong and has no sharp corners. It can be obtained in a wide our products offer the range of sizes and thickness and is freely available worldwide. best solution. Our sloped The difficulty arises in joining pipe fittings that adjust up to form structures. Threaded pipe to 11 degrees help to must be supplied in set lengths simplify the installation. and is therefore relatively expen- Prior to tightening, tubes are allowed to pivot in sive and inflexible in application. the barrel of the sloped fittings, enabling continuous adjustment from zero Welding is labor intensive and requires a highly skilled workforce. through eleven degrees. The answer is provided by the Kee Klamp® Fitting, which has become the basis of a rigid tubular construction system proven Inline Guardrail & the world over. The underlying principle is simple but highly Handrail Down Stairs effective – a non-welded slip-on fitting that can be used to create For quick assembly of versatile and rigid tubular structures. inline railings, handrails ® and guardrails in any The Kee Klamp principle has been developed and refined for industry, Kee Safety has more than 70 years into an extensive range of fittings that can be the perfect solution. used to assemble all forms of tubular structures. Ideal for protection of Kee Klamp® fittings are an innovative and versatile product that crowds in stadiums to are used in the construction of railings, safety barriers, racks, simple protection for greenhouses, structural framework, and thousands of other uses. loading bays, safety walkways in factories, Kee Klamp® railing solutions can Kee Klamp® fittings are installed using only a standard hex key – be used with absolute confidence. no threading or welding required. No headaches about hot-per- mits, specialized labor or equipment. No pre-fabrication of tube Stairway Handrail / structures in shop – everything can be assembled and built on site. Railing Utilizing Kee Klamp® They are also reusable should you wish to dismantle or redesign products, it is easy to your structure. The possible applications are only limited by your assemble proper imagination! stairway handrails and The simple but effective engineering principle of the Kee Klamp® railing systems. Kee fitting is the foundation of the most versatile pipe connection Safety has a solution for system available. There are many variations of fittings to suit a every environment and wide range of applications, thus providing the versatility to achieve situation. Learn more virtually any structural configuration. about how our railing systems can work for you, by contacting a Tanner sales Kee Klamp® fittings are iron castings manufactured to the require- representative. ments of ASTM A47-77-32510. A range of fittings to suit eight sizes of pipe is available. Hex set screws firmly lock the pipe into the fitting. Set screws are manufactured in case hardened steel and are protected against corrosion by Kee Koat®. No Kee Klamp® fittings have been found to be hazardous within the meaning of current OSHA Regulations, assuming that the materials are cut and assembled using normal pipe cutters, saws and hexagonal tools. Kee Klamp® fittings are designed so that the need to weld is avoided - an added safety element since the welding process does have OSHA implications, especially if the pipe is pre- galvanized or has any other pre-finish.

FITTINGS PIPE To Order& Please Call: 800RAIL 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 To Order On-Line: www.tannerbolt.com 234 To Order By Email: [email protected] THE PIPE & RAIL FITTINGS Product Line Steel Structural Fittings

Technical Specifications Shade Structures Assembling shade The simple but effective engineering principle of the Kee structures with the Klamp® Fitting is the foundation of the most versatile pipe structural integrity to connection system available. There are many variations of withstand outdoor fittings to suit wide-ranging applications, providing the elements can be a versatility to achieve virtually any structural configuration. Kee challenge on all levels. Klamp® fittings are generally made from cast iron and are Kee products makes it easy to build a durable manufactured to the requirements of EN 1562 & EN 1563 and reliable shade and galvanized to the requirements of EN ISO 1461. A range structure for any application, location or industry. of fittings to suit eight sizes of pipe is available. A simple hexagon key is the only tool required to create a strong, rigid joint. A recessed grub screw tightened by the hexagon key, Offset Guardrails firmly locks the pipe into the fitting. The grub screw is generally For quick assembly of manufactured in case hardened steel and benefits from Kee offset railings, handrails Koat® protection against corrosion. This combined with the and guardrails in any ® industry – Kee has the ThreadKoat (patented) factory applied coating for the thread- perfect solution. From ed recesses ensures that Kee Klamp fittings achieve longer life simple protection for and better corrosion resistance. In addition to the standard fin- loading bays, safety ish, pipe fittings can be supplied with polyester coating in any walkways in factories, RAL color. safety barriers in A Kee Klamp® fitting (size 7 and 8) can support an axial load aggressive coastal environments, or the protection of road bridges and of 2000 lbs (900 kg). per grub screw with the grub screw culverts – Kee railing solutions can be used with absolute confidence. tightened to a torque of 29 ft./lbs. (39 Nm). Walkways & Selecting Kee Klamp® Fittings Catwalks Every fitting is illustrated and accompanied by a table of sizes and Providing safety in your weights. Each fitting has a simple numerical code reference, which facility, workplace or plant is of the utmost is unique and differentiates itself from every other fitting. The code importance - especially defines the type of fitting and the pipe size or sizes, it is designed on elevated walkways, to receive. catwalks and stairways. The first number, preceding the dash (-) identifies the type of Kee To quickly assemble Klamp® fitting. reliable guardrails and A single digit, following the dash, defines pipe size. Two digits after railings, utilize Kee products for all of your needs. the dash indicate that the fitting is designed to receive two sizes of pipe. Kee Klamp® Pipe Dimensions Kee Klamp Pipe Sizes KEE KLAMP NOM. BORE PIPE DIA. KEE KLAMP TUBE DIA. PIPE REF. INCHES O.D. INCHES I.D. INCHES O.D. INCHES 2** 1/4" 0.54 0.59 17/32" 3** 3/8" 0.68 0.73 11/16" 4** 1/2" 0.84 0.87 27/32" 5** 3/4" 1.05 1.09 1" 6** 1" 1.32 1.38 1-5/16" 7* 1-1/4" 1.66 1.72 1-5/8" 8* 1-1/2" 1.90 1.94 1-7/8" 9** 2" 2.38 2.41 2-3/8" • Note: Nominal bore is an arbitrary dimension, because the bore thickness varies with the wall of the pipe. • *In stock **Available upon request

4302 Glenwood Rd. Brooklyn, NY 11210 800 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 www.tannerbolt.com 235 THE Product Line Steel Structural Fittings

Product Descriptions Designed to give a 90° butt joint between two lengths of pipe. Frequently used Type 10 Single Socket Tee for the joint between end uprights and the middle rail on guard railing where ITEM CODE LBS. the site is straight and level. Also for base ties on racking. Type 25 should be used when a join in the pipe is necessary (P 201). KEE 10-7 0.99 KEE 10-8 1.28

Most frequently used for bracing and struts. Type 12 45° Single Socket Tee ITEM CODE LBS.

KEE 12-7 1.56 KEE 12-8 2.02

Designed to give an inline joint between pipes of the same size. Where a Type 14 Straight Coupling constant diameter is required along the outside of the pipe - i.e. for garment storage - an internal spigot should be considered. In this case Type 18 should ITEM CODE LBS. be used instead of Type 14. KEE 14-7 1.15 KEE 14-8 1.41

A 90° elbow joint, most frequently used as an end joint for the top rail of Type 15 90° Elbow guard railing on a level site. ITEM CODE LBS.

KEE 15-7 1.48 KEE 15-8 1.70

Widely used for adding to and modifying existing structures. This performs Type 16 Clamp-on Tee the same function as a Type 10, but because of its open socket it can be added to a complete structure. ITEM CODE LBS. KEE 16-7 1.30 KEE 16-8 1.32

Designed to provide a 90° cross-over joint. Can be added to an existing Type 17 Clamp-on Crossover structure. Pipe should not be joined within this Kee Klamp fitting. For alternative fitting, see Type 45 (P 202). ITEM CODE LBS. KEE 17-7 0.96 KEE 17-8 1.23

An internal spigot providing a flush joint between two pieces of pipe of the Type 18 Internal Coupling same diameter. Not as strong as the Type 14 fitting, the Type 18 fitting must not be used as a load bearing joint. ITEM CODE LBS. Note: This fitting can only be used with schedule 40 pipe. KEE 18-7 0.084 Danger: The Type 18 fitting must not be used as a load bearing joint. KEE 18-8 1.19

Used in pairs to form variable angle joints between 90° and Type 19 Adj. Side Outlet Tee 180°. When calculating cutting lengths for pipe, ITEM CODE INCHES LBS. dimension 'E' should be subtracted to give true pipe length. D E Note: Type 19 fittings are normally used in pairs. In the case KEE 19-7 2.87 1.57 0.90 E of type 19-8 these fittings can produce an angle range D KEE 19-8 3.54 2.17 1.17 between 60° and 180°. • All Kee Klamp® fittings are packaged individually.

FITTINGS PIPE To Order& Please Call: 800RAIL 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 To Order On-Line: www.tannerbolt.com 236 To Order By Email: [email protected] THE PIPE & RAIL FITTINGS Product Line Steel Structural Fittings

Product Descriptions A 90° corner joint most frequently used for the top rail of guard railing. It can Type 20 Side Outlet Elbow also be considered for the top corner joint of benches, worktables, and other ITEM CODE LBS. rectangular structures. KEE 20-7 1.79 KEE 20-8 2.49

Most frequently paired with Type 20 to give a 90° corner joint for the middle Type 21 90° Side Outlet Tee rail of guard railing and other rectangular structures. The upright passes through the fitting. ITEM CODE LBS. KEE 21-7 1.52 KEE 21-8 1.87

Most commonly used as the 90° joint between the top rail and an intermediate Type 25 Three Socket Tee upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal pipe. The Type 10 ITEM CODE LBS. fitting can be used as an alternative when a join in the pipe is not required. KEE 25-7 1.87 KEE 25-8 2.40

Usually paired with Type 25 to give a 90° joint between the middle rail and Type 26 Two Socket Cross an intermediate upright on safety railing. The upright passes through the fitting. ITEM CODE LBS.

KEE 26-7 1.43 KEE 26-8 1.87

Designed as an alternative to the Type 12 fitting, this adjustable fitting is most Type 29 30°-60° Single Socket Tee frequently used for bracing and struts. It may be used at any selected angle between 30° and 60°. ITEM CODE LBS. KEE 29-7 1.39 KEE 29-8 2.14

Designed as an alternative to the Type 28 fitting, this adjustable fitting can Type 30 30° - 45° Adj. Cross be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected ITEM CODE LBS. angle between 30° and 45°. KEE 30-7 2.14 KEE 30-8 2.87

Most frequently used to tie uprights with horizontal pipes in three directions, Type 35 Three Socket Cross all at 90° to the upright. The upright passes through the fitting. ITEM CODE LBS.

KEE 35-7 1.70 KEE 35-8 2.62

Most frequently used in multiple upright structures to tie a center upright with Type 40 Four Socket Cross horizontal pipes in four directions. The upright passes through the fitting. ITEM CODE LBS.

KEE 40-7 2.32 KEE 40-8 3.22

• All Kee Klamp® fittings are packaged individually.

4302 Glenwood Rd. Brooklyn, NY 11210 800 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 www.tannerbolt.com 237 THE Product Line Steel Structural Fittings

Product Descriptions Designed to give a 90° offset crossover joint. Frequently used on safety railing, Type 45 Crossover where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail ITEM CODE LBS. is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across KEE 45-7 1.18 the section are not required. KEE 45-8 1.30 Used on racking to join horizontal carrying rails to the upright, leaving the Type 46 Socket Tee & Crossover socket to take a horizontal tie across the section. For shelved racking it is ITEM CODE LBS. usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to have the carrying rails inside the upright KEE 46-7 1.52 KEE 46-8 2.01

Complete combination fitting. Frequently used for bracing but can also over- Type C50 Single Swivel Socket come problems where joints are required at angles other than those achieved by fixed angle fittings. An entire structure should not be constructed ITEM CODE LBS. from swivel fittings, as they would not provide sufficient stability or rigidity in KEE C50-77 1.76 the structure. These fittings are not designed to take bending moments. KEE C50-88 2.01

A swivel fitting for attachment of angled pipe to a flat surface. Type C58 Swivel Flange Warning: It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure. ITEM CODE LBS. KEE C58-7 1.85 KEE C58-8 2.07

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings Type 60 Extra Heavy Flange only, is for use on structures where the fixing required is positional only. ITEM CODE LBS. Frequently used as a wall fixing bracket. KEE 60-7 2.87 Warning: It is not recommended for use as a base flange to support guardrailing or balustrading. KEE 60-8 3.26

This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently Type 61 Flange used as a wall fixing bracket. ITEM CODE LBS. Warning: It is not recommended for use as a base flange to support guardrailing or balustrading. KEE 61-7 1.37 KEE 61-8 1.48

Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure Type 62 Stand. Railing Flange proper fixing with either a mechanical or chemical anchor. The two set screws in ITEM CODE LBS. the vertical socket give greater sideload stability to the upright. It is recommended KEE 62-7 2.87 that the fixing holes in the flange should be in line with the applied load. KEE 62-8 2.86

This fitting is similar to Type 62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which Type 63 Angle Base Flange cannot be positioned at 90° to the applied load. For greater loads or other pipe ITEM CODE LBS. sizes, a Type 62 flange is used and the upright is bent to the required angle. Most KEE 63-7 2.54 frequently used in multiple upright structures to tie a center upright with KEE 63-8 3.31 horizontal pipes in four directions. • All Kee Klamp® fittings are packaged individually.

FITTINGS PIPE To Order& Please Call: 800RAIL 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 To Order On-Line: www.tannerbolt.com 238 To Order By Email: [email protected] THE PIPE & RAIL FITTINGS Product Line Steel Structural Fittings

Product Descriptions This fitting is designed for fixing guardrailing and balustrading to walls, parapets, Type 64 Standard Vertical Railing Base steps and ramps. The upright cannot drop through the socket. Access to the ITEM CODE LBS. top fixing hole is restricted by the position of the flange to the barrel. When selecting a hexagon head bolt or similar bolt fixing, the maximum length of the KEE 64-7 2.47 bolt including the head must not exceed 1" KEE 64-8 3.40 A ground socket fitting for setting in concrete; the posts may either be Type 66 Ground Socket permanent or removable as required. It incorporates a socket set screw fixing ITEM CODE LBS. and can be supplied with a plug to fill the hole when the pipe is removed. Socket will easily accommodate standard size Schedule 40 Galvanized Steel KEE 66-7 5.12 Pipe & Aluminum Pipe with or without powder coating. KEE 66-8 5.51

Type 67 has been designed to allow the upright to pivot in the barrel, providing Type 67 Angle Fitting an angular displacement from 3° up to a maximum of 11°, measured from the vertical. Ideal to secure balustrade and guardrail systems on access ITEM CODE LBS. ramps or other types of slopes. KEE 67-8 2.87

Side fixing for guardrailing and balustrading to walls, parapets, steps and Type 68 Wall Flange ramps. The upright cannot drop through the socket. Warning: If the upright is required to pass through the fitting by machining out the base stop, ITEM CODE LBS. the bottom fixing hole will be unusable. KEE 68-7 1.76 KEE 68-8 2.09

This fitting is designed for guardrailing and balustrading applications and has the Type 69 Railing Flange w/Toebar Adaptor added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or chemical ITEM CODE LBS. anchor, the side plates have slotted holes to allow for a degree of sideways KEE 69-7 4.32 movement for ease of installation. A toeplate for use with Type 69 fitting is available. KEE 69-8 5.07

This fitting, with holes provided for countersunk flat head screw fixings only, Type 70 Rail support is designed to carry handrails along walls or to fix structures back to walls. ITEM CODE LBS. The pipe passes through the fitting and cannot be joined within the fitting. Type 70 is also used to attach toeboards to the base of guardrail uprights. KEE 70-7 1.23 Warning: These fittings are not to be used as base flanges for full height guardrails. KEE 70-8 1.72

A collar commonly used to support another fitting if the latter is required to be left Type 75 Collar untightened, such as on gate hinges. Type 75 is also useful when the loading on ITEM CODE LBS. a structure exceeds the maximum permitted slip load for a set screw, as it gives extra support. KEE 75-7 0.33 KEE 75-8 0.42

A fitting normally used for attachment of chains. Type 76 Hook ITEM CODE LBS.

KEE 76-7 0.51 KEE 76-8 0.53

• All Kee Klamp® fittings are packaged individually.

4302 Glenwood Rd. Brooklyn, NY 11210 800 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 www.tannerbolt.com 239 THE Product Line Steel Structural Fittings

Product Descriptions Type 77 Plastic Plug A grey plastic plug to fit open ended pipes. ITEM CODE LBS. KEE 77-7 0.035 KEE 77-8 0.044

A fitting used in conjunction with Type 83 fitting for gate hinges. Type 78 Eye Fitting ITEM CODE LBS. KEE 78-5 0.46 KEE 78-6 0.55 KEE 78-7 0.57 KEE 78-8 0.62

Single clips for attaching wire-mesh infilling. Each clip is supplied with a Type 81 Single Sided Clip hexagonal head fixing bolt, 6x35mm long, and nut. ITEM CODE LBS. KEE 81-7 0.46 KEE 81-8 0.55

Double clips for attaching wire-mesh infilling. All clips are supplied with Type 82 Double Sided Clip hexagonal head fixing bolts, M6x35mm long, and nut. The primary clip has a ITEM CODE LBS. slot measuring 8mm x 15mm. KEE 82-7 0.29 KEE 82-8 0.31

This fitting is used in conjunction with Type 78 for gate hinges. Type 83 Pin Fitting ITEM CODE LBS. KEE 83-7 0.64 KEE 83-8 0.66

A cast metal drive-in plug which is difficult to remove when installed. Type 84 Malleable Plug ITEM CODE LBS. KEE 84-7 0.26 KEE 84-8 0.37

The Cover Flange slips over uprights to finish below ground post installations. Type 118 Cover Flange The fitting is secured to the upright pipe with a single recessed grubscrew. ITEM CODE LBS. KEE 118-8 0.88

The Type 350 fitting has been designed for small structural building applications Type 350 Eaves Fitting and provides for significant load rating. When used with the Type 351 ridge ITEM CODE LBS. fitting a truss arrangement for additional support can be achieved. Double set screws are provided on the truss outlet to provide additional pull out resistance. KEE 350-8 2.62

The Type 351 fitting has been designed for small structural building applications Type 351 Ridge Fitting and provides for significant load rating. When used with the Type 350 eave fitting a truss arrangement for additional support can be achieved. Double set ITEM CODE LBS. screws are provided on the downward truss outlet to provide additional pull KEE 351-8 2.62 out resistance and extra strength to the structure. • All Kee Klamp® fittings are packaged individually. FITTINGS PIPE To Order& Please Call: 800RAIL 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 To Order On-Line: www.tannerbolt.com 240 To Order By Email: [email protected]