Standard Products

BRACKETS

CONNECTORS

ELBOWS

FLANGES

SPHERES / HEMISPHERES / POST & END CAPS

SLIP-ON FITTINGS

BIKE RACKS

MISCELLANEOUS PRODUCTS Kee Klamp® Galvanized Malleable Iron Slip-On Fittings

® 3 Kee Klamp Kee Klamps are strong, malleable iron, Slip-On Pipe /4" Pipe = 1.05" Diameter Fittings with from one to five case-hardened Set 1" Pipe = 1.315" Diameter Fittings Screws per Fitting – depending on the number of Pipes 1 1 /4" Pipe = 1.66" Diameter to be joined at one joint. • 1 Quick and easy way 1 /2" Pipe = 1.90" Diameter For Slip-On Aluminum Fittings, turn to page 80. to assemble Structural Pipe 2" Pipe = 2.375" Diameter Systems. View Installation Instructions and Structural Information at wagnercompanies.com. • Galvanized Malleable Iron. • Reduce labor costs by 70%. e • 100% reusable. • No welding or threading. d d • No drilling or bolting. Straight Coupling Internal Coupling STANDARD PRODUCTS STANDARD Pipe Size d MALLEABLE IRON This Coupling is not to be used as a load 1" 3.50" KK14-6 bearing joint. 1 e 1 /4" 4.01" KK14-7 Pipe Size d e MALLEABLE IRON 1 1 /2" 4.09" KK14-8 f 1" 2.99" .79" KK18-6

d 2" 4.88" KK14-9 1 1 /4" 2.99" .79" KK18-7 1 1 /2" 3.74" .79" KK18-8

d

45° Single Socket Tee RAILING SYSTEMS Pipe MALLEABLE Size d e f IRON 1" 1.73" 3.35" 1.38" KK12-6 1 1 /4" 2.17" 3.70" 1.58" KK12-7 e 1 1 /2" 2.36" 4.25" 1.58" KK12-8 90° Elbow d Pipe Size d MALLEABLE IRON 1" 1.81" KK15-6 Adjustable Side Outlet Tee 1 1 /4" 2.36" KK15-7 Pipe MALLEABLE 1 1 /2" 2.67" KK15-8 Size d e IRON

2" 3.34" KK15-9 1" 2.28" 1.30" KK19-6 TRADITIONAL RAILING

d 1 1 /4" 2.87" 1.57" KK19-7 1 KK16 1 /2" 3.54" 2.17" KK19-8 1 1 /2" 2.87" 1.77" KK19-85* Clamp-On Tee a 2" 4.33" 1.93" KK19-9 1 3 Pipe Size d MALLEABLE IRON *Connects 1 /2" to /4" Pipe. 1 1 /4" 2.68" KK16-7

1 d 1 /2" 2.87" KK16-8 2" 3.54" KK16-9 b e d CUSTOM SERVICES Single Socket Tee

b Pipe Pipe MALLEABLE e Size (a) Size (b) d e IRON d 1" 1" 1.81" 1.84" KK10-6 Internal Coupling 3 1" /4" 1.75" 1.42" KK10-65* Pipe MALLEABLE a 1 1" 1 /4" 2.20" 2.06" KK10-67* Size d e IRON 1 1 e 1 1 /4" 1 /4" 2.38" 2.16" KK10-7 1 /4" 2.93" 1.00" KK514-7 1 3 1 /4" /4" 2.25" 1.44" KK10-75* 1 4 1 / " 1" 2.25" 1.80" KK10-76* APPENDIX 1 1 Clamp-On Crossover 1 /4" 1 /2" 2.88" 2.38" KK10-78* 1 1 Pipe Size Pipe Size MALLEABLE 1 /2" 1 /2" 2.69" 2.38" KK10-8 1 1 a b d e IRON 1 /2" 1 /4" 2.47" 2.03" KK10-87* 1" 1" 1.34" 1.89" KK17-6 2" 2" 3.31" 2.88" KK10-9 1 1 1 1 /4" 1 /4" 1.69" 2.28" KK17-7 2" 1 /2" 2.94" 2.50" KK10-98* 1 1 1 /2" 1 /2" 1.93" 2.56" KK17-8 * Through connection and terminal 2" 2" 2.40" 3.07" KK17-9 connection are different Pipe size. Kee Klamp Video

shopwagner.com 89 Kee Klamp® Galvanized Malleable Iron Slip-On Fittings

These Fittings can support an axial load of 2,000 lbs per Set Screw with the Set Screw tightened to a torque of 29 lbs/ft. This is normally obtained when the Screw is fully tightened using a ratchet wrench.

3 /4" Pipe = 1.05" Diameter 1" Pipe = 1.315" Diameter 1 1 /4" Pipe = 1.66" Diameter 1 1 /2" Pipe = 1.90" Diameter 2" Pipe = 2.375" Diameter

d e d

Side Outlet Elbow 90° Side Outlet Tee Pipe Size d MALLEABLE IRON For adding to or modifying existing 1" 1.81" KK20-6 structures. 1 1 /4" 2.36" KK20-7 MALLEABLE 1 1 /2" 2.68" KK20-8 Pipe Size d e IRON 1 2" 3.35" KK20-9 1 /2" 3.46" 2.36" KKA21/A26-8

d

e d

d Adjustable Cross KK30 is adjustable between 30° and 45° 90° Side Outlet Tee 30° to 60° Single Socket Tee from the horizontal. Pipe Size d MALLEABLE IRON Pipe Size d e MALLEABLE IRON Pipe Size d MALLEABLE IRON 1" 1.81" KK21-6 1" 3.23" 2.52" KK29-6 1 1 1" 5.75" KK30-6 1 /4" 2.36" KK21-7 1 /4" 3.66" 2.91" KK29-7 1 1 1 1 /4" 7.01" KK30-7 1 /2" 2.68" KK21-8 1 /2" 4.02" 2.68" KK29-8 1 1 /2" 8.50" KK30-8 2" 3.35" KK21-9

e e d d

d

90° Three Socket Tee Two Socket Cross Side Outlet Tee For use when splicing Pipe within the Tee. Pipe Size d MALLEABLE IRON Pipe Size d e MALLEABLE IRON 3 Pipe Size d e MALLEABLE IRON 1" 3.62" KK26-6 /4" 1.61" 3.23" KK35-5 1 1" 1.81" 3.62" KK25-6 1 /4" 4.72" KK26-7 1" 1.81" 3.62" KK35-6 1 1 1 1 /2" 5.35" KK26-8 1 /4" 2.36" 4.72" KK35-7 1 /4" 2.36" 4.72" KK25-7 1 1 2" 6.61" KK26-9 1 /2" 2.68" 5.35" KK35-8 1 /2" 2.68" 5.35" KK25-8 2" 3.35" 6.61" KK25-9 2" 3.35" 6.61" KK35-9 NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order – requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.

90 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914 Kee Klamp® Galvanized Malleable Iron Slip-On Fittings

b d e e

a e d

Crossover Female Single Swivel Pipe Pipe MALLEABLE Socket Member Obtuse Angle Elbow 125 to 178° Size (a) Size (b) d e IRON Pipe Size e MALLEABLE IRON 3 3 Pipe MALLEABLE /4" /4" 1.34" 1.22" KK45-5 Size d e Bolt Hole IRON 1" 4.57" KK55-6 1" 1" 1.57" 1.50" KK45-6 3 1 /4" 2.36" .98" .39" KKF50-5 1 /4" 6.06" KK55-7 1 1" 1" 1.42" 1.69" KK45-65* 1 /2" 6.02" KK55-8 1 1 1" 2.36" .98" .39" KKF50-6 1 /4" 1 /4" 2.13" 1.81" KK45-7 1

4 PRODUCTS STANDARD 1 1 1 / " 2.68" .98" .39" KKF50-7 1 /4" 1 /4" 1.77" 1.81" KK45-7* 1 2 1 1 1 / " 2.99" .98" .39" KKF50-8 1 /2" 1 /2" 2.17" 2.01" KK45-8 1 1 2" 3.35" 1.02" .39" KKF50-9 1 /2" 1 /2" 1.89" 2.00" KK45-86* 1 1 1 /2" 1 /2" 2.01" 2.00" KK45-87* 2" 2" 2.64" 2.40" KK45-9 2" 2" 2.36" 2.99" KK45-98* f * Through connection and terminal connection are different Pipe size. d e e RAILING SYSTEMS d Split Crossover Acute Angle Elbow 40 to 70° Unique hinge and pin system enables Pipe MALLEABLE Male Single Horizontal existing structures to be easily extended Size d e f IRON 1 Swivel Socket Member without the need for dismantling. 1 /2" 5.28" 4.41" 4.41" KK56-8 Pipe Size Hole Diam. MALLEABLE IRON Pipe Size d e MALLEABLE IRON 1 1" 0.39" KKMH50-6 1 /4" 1.93" 1.81" KKA45-7 1 1 /2" 2.17" 1.96" KKA45-8 TRADITIONAL RAILING

Male Single Horizontal Clip with Slot Single Swivel Socket Swivel Double Socket Member For attachment of panels and flooring Pipe Size Pin Size MALLEABLE IRON 3 Pipe Size Hole Diam. MALLEABLE IRON to Pipe structures. 1" /8" KKC50-66 1 3 1" 0.39" KKMH51-6 Pipe Size MALLEABLE IRON 1 /4" /8" KKC50-77 1 3 1 1 /2" /8" KKC50-88 CUSTOM SERVICES 1 /2" KKP57-8 3 2" /8" KKC50-99 APPENDIX

Double Swivel Socket Pipe Size MALLEABLE IRON 1" KKC51-666 1 1 /4" KKC51-777 1 1 /2" KKC51-888 2" KKC51-999

shopwagner.com 91 Kee Klamp® Galvanized Malleable Iron Slip-On Fittings d

Swivel Flange f Pipe Size MALLEABLE IRON 3 h 4 / " KKC58-5 g 1" KKC58-6 e 1 1 /4" KKC58-7 Standard Railing Flange 1 1 /2" KKC58-8 Pipe Size d e f g h Hole Diameter MALLEABLE IRON 2" KKC58-9 1" 2.99" 5.04" 3.50" 3.50" 0.31" 0.55" KK62-6 Note: This is a loose fit connection. It cannot 1 1 /4" 2.99" 5.51" 3.54" 4.02" 0.43" 0.55" KK62-7 be locked into position. 1 1 /2" 3.34" 6.10" 3.50" 4.53" 0.39" 0.55" KK62-8 2" 4.02" 6.50" 5.00" 5.00" 0.39" 0.71" KK62-9

j h

Extra Heavy Flange For use on structures where the attachment required is positional only – d not structural. g e Pipe Base Size Diameter Height MALLEABLE IRON 1" 5.51" 2.52" KK60-6 1 Vertical Railing Base 1 /4" 5.87" 2.52" KK60-7 1 1 /2" 6.18" 2.52" KK60-8 For fascia mounting Posts. Pipe Size d e g h j Hole Diameter MALLEABLE IRON 1" 4.26" 3.74" 2.64" 2.24" 1.77" 0.55" KK64-6 1 Flange 1 /4" 4.49" 4.25" 2.83" 2.56" 2.01" 0.55" KK64-7 1 For use on structures 1 /2" 4.77" 4.76" 3.50" 2.76" 2.20" 0.55" KK64-8 where the attachment j required is positional only e – not structural.

Pipe Base Size Diameter Height MALLEABLE IRON 1" 3.54" 1.93" KK61-6 f

1 k 1 /4" 4.02" 2.01" KK61-7 1 1 /2" 4.53" 2.32" KK61-8 2" 5.00" 2.48" KK61-9 Fascia Flange h For fascia mounting Posts. d Hole Pipe Size e f h j k Diameter MALLEABLE IRON f 1" 1.77" 3.03" 0.94" 3.75" 4.06" 0.43" KK68-6 1 1 /4" 2.09" 3.27" 1.10" 4.19" 4.25" 0.43" KK68-7 e g 1 1 /2" 2.36" 3.50" 1.22" 4.44" 4.56" 0.43" KK68-8

Ground Socket For use when uprights are required to be removable. Angle Flange Pipe MALLEABLE For ramps where angle from vertical Size d e f g IRON Horizontal Base is between 3° and 11°. 1" 5.00" 4.84" 0.43" 4.53" KK66-6 Hole 1 1 /4" 5.51" 5.35" 0.43" 5.00" KK66-7 Pipe Size Diameter MALLEABLE IRON Pipe Size Hole Diameter MALLEABLE IRON 1 1 1 /2" 5.51" 5.35 0.43" 5.00" KK66-8 1" 0.55" KK65-6 1 /2" 0.55" KK67-8 NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order – requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.

92 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914 Kee Klamp® Galvanized Malleable Iron Slip-On Fittings

3 /4" Pipe = 1.05" Diameter ’S 1" Pipe = 1.315" Diameter GNER 1 A 1 /4" Pipe = 1.66" Diameter W R 1 O 2 1 / " Pipe = 1.90" Diameter F K 2" Pipe = 2.375" Diameter O O

L Flange with Toeboard Adapter Rail Support Wall Mount Handrail Brackets Allows attachment of a Pipe MALLEABLE kick plate to the base. Size IRON 16 - 1" KK70-6 6 Pipe MALLEABLE 1 es Size IRON 1 /4" KK70-7 see pag 1 1 1 /2" KK70-8 1 /4" KK69-7 1 2 1 / " KK69-8 PRODUCTS STANDARD

PGR Three Socket Tee PGR Two Socket Cross PGR Elbow Pipe MALLEABLE Pipe MALLEABLE Pipe MALLEABLE Size IRON Size IRON Size IRON 1 1 1 1 /2" KKP90-8 1 /2" KKP91-8 1 /2" KKP92-8

Single Sided Clip Double Sided Clip Two Socket Angle Cross RAILING SYSTEMS For attaching wire mesh Infill. Hex head For attaching wire mesh Infill. Hex head Use to join the Bolts are supplied. Bolts are supplied. Sold in packages of 10. middle Rail to an Intermediate Post on Pipe MALLEABLE Pipe MALLEABLE Size IRON Size IRON a slope of up to 11°. 1" KK81-6 1" KK82-6 Pipe MALLEABLE 1 1 1 /4" KK81-7 1 /4" KK82-7 Size IRON 1 1 1 1 /2" KK81-8 1 /2" KK82-8 1 /2" KK89-8 2" KK81-9 2" KK82-9

Angle Tee Angle Tee TRADITIONAL RAILING Pedestrian Guardrail Tee Used to join the middle For use when splicing Pipe within Rail to an end upright the Tee on a slope of Pipe MALLEABLE on a slope of up to 11°. up to 11°. Size IRON 1 1 /2" KKP93-8 Pipe MALLEABLE Pipe MALLEABLE Size IRON Size IRON 1 1 1 /2" KK86-8 1 /2" KK88-8 CUSTOM SERVICES APPENDIX

shopwagner.com 93