DOCSLIB.ORG

Sodium Ascorbate

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Sodium Ascorbate Sodium Ascorbate Cambridge Commodities Chemwatch Hazard Alert Code: 2 Part Number: P19141 Issue Date: 08/03/2018 Version No: 2.2.23.11 Print Date: 24/09/2021 Safety data sheet according to REACH Regulation (EC) No 1907/2006, as amended by UK REACH Regulations SI 2019/758 S.REACH.GB.EN SECTION 1 Identification of the substance / mixture and of the company / undertaking 1.1. Product Identifier Product name Sodium Ascorbate Chemical Name Not Applicable Synonyms Not Available Chemical formula Not Applicable Other means of P19141, P07138 identification 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Use according to manufacturer's directions. Uses advised against Not Applicable 1.3. Details of the supplier of the safety data sheet Registered company name Cambridge Commodities Address Lancaster Way Business Park, Ely, Cambridgeshire Cambridgeshire CB6 3NX United Kingdom Telephone +44 1353 667258 Fax Not Available Website Not Available Email [email protected] 1.4. Emergency telephone number Association / Organisation Not Available Emergency telephone Not Available numbers Other emergency Not Available telephone numbers Product code: P19141 Version No: 2.2.23.2 Page 1 of 15 S.REACH.GB.EN Lancaster Way Business Park Safety Data Sheet (Conforms to Regulation (EU) No 2020/878) Ely, Cambridgeshire, CB6 3NX, UK. Chemwatch: 9-518724 +44 (0) 1353 667258 Issue Date: 08/03/2018 [email protected] Print Date: 24/09/2021 www.c-c-l.com SECTION 2 Hazards identification 2.1. Classification of the substance or mixture Classified according to GB-CLP Regulation, UK SI H341 - Germ Cell Mutagenicity Category 2 2019/720 and UK SI 2020/1567 [1] Legend: 1. Classified by Chemwatch; 2. Classification drawn from GB-CLP Regulation, UK SI 2019/720 and UK SI 2020/1567 2.2. Label elements Hazard pictogram(s) Signal word Warning Hazard statement(s) H341 Suspected of causing genetic defects. Supplementary statement(s) Not Applicable Precautionary statement(s) Prevention P201 Obtain special instructions before use. P280 Wear protective gloves and protective clothing. Precautionary statement(s) Response P308+P313 IF exposed or concerned: Get medical advice/ attention. Precautionary statement(s) Storage P405 Store locked up. Precautionary statement(s) Disposal P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation. 2.3. Other hazards Cumulative effects may result following exposure*. May possibly affect fertility*. REACh - Art.57-59: The mixture does not contain Substances of Very High Concern (SVHC) at the SDS print date. SECTION 3 Composition / information on ingredients Product code: P19141 Version No: 2.2.23.2 Page 2 of 15 S.REACH.GB.EN Lancaster Way Business Park Safety Data Sheet (Conforms to Regulation (EU) No 2020/878) Ely, Cambridgeshire, CB6 3NX, UK. Chemwatch: 9-518724 +44 (0) 1353 667258 Issue Date: 08/03/2018 [email protected] Print Date: 24/09/2021 www.c-c-l.com 3.1.Substances See 'Composition on ingredients' in Section 3.2 3.2.Mixtures 1.CAS No 2.EC No Classified according to GB-CLP Regulation, UK SI Nanoform Particle %[weight] Name 3.Index No 2019/720 and UK SI 2020/1567 Characteristics 4.REACH No 1.134-03-2 2.205-126-1 sodium 99 Germ Cell Mutagenicity Category 2; H341 [1] Not Available 3.Not Available ascorbate 4.Not Available 1.9005-25-8 2.232-679-6 1 starch Not Applicable Not Available 3.Not Available 4.Not Available Legend: 1. Classified by Chemwatch; 2. Classification drawn from GB-CLP Regulation, UK SI 2019/720 and UK SI 2020/1567; 3. Classification drawn from C&L; * EU IOELVs available; [e] Substance identified as having endocrine disrupting properties SECTION 4 First aid measures 4.1. Description of first aid measures Eye Contact Generally not applicable. Skin Contact Generally not applicable. Inhalation Generally not applicable. Ingestion Generally not applicable. 4.2 Most important symptoms and effects, both acute and delayed See Section 11 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5 Firefighting measures 5.1. Extinguishing media Foam. Dry chemical powder. BCF (where regulations permit). Carbon dioxide. Water spray or fog - Large fires only. 5.2. Special hazards arising from the substrate or mixture Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may Fire Incompatibility result Product code: P19141 Version No: 2.2.23.2 Page 3 of 15 S.REACH.GB.EN Lancaster Way Business Park Safety Data Sheet (Conforms to Regulation (EU) No 2020/878) Ely, Cambridgeshire, CB6 3NX, UK. Chemwatch: 9-518724 +44 (0) 1353 667258 Issue Date: 08/03/2018 [email protected] Print Date: 24/09/2021 www.c-c-l.com 5.3. Advice for firefighters Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water courses. Use water delivered as a fine spray to control fire and cool adjacent area. Fire Fighting DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location. If safe to do so, remove containers from path of fire. Equipment should be thoroughly decontaminated after use. Slight hazard when exposed to heat, flame and oxidisers. Combustible. Will burn if ignited. Combustion products include: , carbon monoxide (CO) , carbon dioxide (CO2) Fire/Explosion Hazard , other pyrolysis products typical of burning organic material. Articles and manufactured articles may constitute a fire hazard where polymers form their outer layers or where combustible packaging remains in place. Certain substances, found throughout their construction, may degrade or become volatile when heated to high temperatures. This may create a secondary hazard. SECTION 6 Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures See section 8 6.2. Environmental precautions See section 12 6.3. Methods and material for containment and cleaning up Clean up all spills immediately. Secure load if safe to do so. Minor Spills Bundle/collect recoverable product. Collect remaining material in containers with covers for disposal. Minor hazard. Clear area of personnel. Alert Fire Brigade and tell them location and nature of hazard. Wear physical protective gloves e.g. Leather. Major Spills Contain spill/secure load if safe to do so. Bundle/collect recoverable product and label for recycling. Collect remaining product and place in appropriate containers for disposal. Clean up/sweep up area. Water may be required. 6.4. Reference to other sections Personal Protective Equipment advice is contained in Section 8 of the SDS. SECTION 7 Handling and storage Product code: P19141 Version No: 2.2.23.2 Page 4 of 15 S.REACH.GB.EN Lancaster Way Business Park Safety Data Sheet (Conforms to Regulation (EU) No 2020/878) Ely, Cambridgeshire, CB6 3NX, UK. Chemwatch: 9-518724 +44 (0) 1353 667258 Issue Date: 08/03/2018 [email protected] Print Date: 24/09/2021 www.c-c-l.com 7.1. Precautions for safe handling Limit all unnecessary personal contact. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Avoid contact with incompatible materials. When handling, DO NOT eat, drink or smoke. Keep containers securely sealed when not in use. Safe handling Avoid physical damage to containers. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Use good occupational work practice. Observe manufacturer's storage and handling recommendations contained within this SDS. Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained. Fire and explosion See section 5 protection Store away from incompatible materials. Other information 7.2. Conditions for safe storage, including any incompatibilities Generally packaging as originally supplied with the article or manufactured item is sufficient to protect against physical hazards. Suitable container If repackaging is required ensure the article is intact and does not show signs of wear. As far as is practicably possible, reuse the original packaging or something providing a similar level of protection to both the article and the handler. Avoid strong acids, bases. Storage incompatibility Avoid reaction with oxidising agents 7.3. Specific end use(s) See section 1.2 SECTION 8 Exposure controls / personal protection 8.1. Control parameters DNELs PNECs Ingredient Exposure Pattern Worker Compartment Not Available Not Available Not Available * Values for General Population Occupational Exposure Limits (OEL) INGREDIENT DATA Source Ingredient Material name TWA STEL Peak Notes UK Workplace Exposure starch Starch: respirable 4 mg/m3 Not Available Not Available Not Available Limits (WELs) UK Workplace Exposure starch Starch: total inhalable 10 mg/m3 Not Available Not Available Not Available Limits (WELs) Emergency Limits Product code: P19141 Version No: 2.2.23.2 Page 5 of 15 S.REACH.GB.EN Lancaster Way Business Park Safety Data Sheet (Conforms to Regulation (EU) No 2020/878) Ely, Cambridgeshire, CB6 3NX, UK. Chemwatch: 9-518724 +44 (0) 1353 667258 Issue Date: 08/03/2018 [email protected] Print Date: 24/09/2021 www.c-c-l.com Ingredient TEEL-1 TEEL-2 TEEL-3 starch 30 mg/m3 330 mg/m3 2,000 mg/m3 Ingredient Original IDLH Revised IDLH sodium ascorbate Not Available Not Available starch Not Available Not Available Occupational Exposure Banding Ingredient Occupational Exposure Band Rating Occupational Exposure Band Limit sodium ascorbate D > 0.01 to ≤ 0.1 mg/m³ Notes: Occupational exposure banding is a process of assigning chemicals into specific categories or bands based on a chemical's potency and the adverse health outcomes associated with exposure.
Load more

Recommended publications
  • Sodium Ascorbate Powder USP MSDS Material Safety Data Sheet
    Sodium Ascorbate Powder USP MSDS Material Safety Data Sheet NFPA HMIS Personal Protective Equipment Health Hazard 1 1 1 0 Fire Hazard 1 Reactivity 0 See Section 15. Section 1. Chemical Product and Company Identification Page Number: 1 Common Name/ Sodium ascorbate Catalog S1137, SO108, S1349 Trade Name Number(s). CAS# 134-03-2 Manufacturer SPECTRUM LABORATORY PRODUCTS INC. RTECS CI7671000 14422 S. SAN PEDRO STREET TSCA TSCA 8(b) inventory: Sodium GARDENA, CA 90248 ascorbate Commercial Name(s) Ascorbicin, Ascorbin, Cebitate, Natrascorb CI# Not available. Synonym Sodium L-Ascorbate; Vitamin C Sodium; IN CASE OF EMERGENCY L-Ascorbic acid sodium salt; CHEMTREC (24hr) 800-424-9300 Ascorbic acid sodium salt; Monosodium L-Ascorbate Chemical Name L-Ascorbic Acid, monsodium salt Chemical Family Not available. CALL (310) 516-8000 Chemical Formula C6H7NaO6 Supplier SPECTRUM LABORATORY PRODUCTS INC. 14422 S. SAN PEDRO STREET GARDENA, CA 90248 Section 2.Composition and Information on Ingredients Exposure Limits Name CAS # TWA (mg/m 3) STEL (mg/m 3) CEIL (mg/m 3) % by Weight 1) Sodium ascorbate 134-03-2 100 Toxicological Data Sodium ascorbate : on Ingredients ORAL (LD50): Acute: 17531 mg/kg [Mouse]. 16300 mg/kg [Rat]. Section 3. Hazards Identification Potential Acute Health Effects Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Potential Chronic Health CARCINOGENIC EFFECTS : Not available. Effects MUTAGENIC EFFECTS : Mutagenic for mammalian somatic cells. TERATOGENIC EFFECTS : Not available. DEVELOPMENTAL TOXICITY : Not available. The substance may be toxic to kidneys, bladder. Repeated or prolonged exposure to the substance can produce target organs damage.
    [Show full text]
  • S1349 5 KG Sodium Ascorbate
    Scientific Documentation S1349, Sodium Ascorbate, Powder, USP Not appropriate for regulatory submission. Please visit www.spectrumchemical.com or contact Tech Services for the most up‐to‐date information contained in this information package. Spectrum Chemical Mfg Corp 769 Jersey Avenue New Brunswick, NJ 08901 Phone 732.214.1300 Ver4.02 23.May.2016 Dear Customer, Thank you for your interest in Spectrum’s quality products and services. Spectrum has been proudly serving our scientific community for over 45 years. It is our mission to manufacture and distribute fine chemicals and laboratory products with Quality and delivery you can count on every time. To accomplish our mission, Spectrum utilizes our sourcing leverage and supplier qualification expertise in offering one of the industry’s most comprehensive line of fine chemical products under one brand, in packaging configurations designed to meet your research and production requirements. Our product grades include: USP, NF, BP, EP, JP, FCC, ACS, KSA, Reagent grade, as well as DEA controlled substances. We operate facilities in the United States on the East Coast, West Coast, as well as in Shanghai, China in order to provide the best logistical support for our customers. At Spectrum, Quality is priority number one. Suppliers with the best qualifications are preferred and we employ full-functioning in-house analytical laboratories at each of our facilities. Our facilities and systems are USFDA registered and ISO certified. We frequently host customer audits and cherish opportunities for improvements. Quality is engrained into our culture. Quality is priority number one. In the following pages, we have designed and prepared documented scientific information to aid you in your initial qualification or your continual use of our products.
    [Show full text]
  • EU Regulation on the Use of Antioxidants in Meat Preparation
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 25 March 2019 Review EU regulation on the use of antioxidants in meat preparation and in meat products Beniamino T. Cenci-Goga1* ([email protected]), Luca Grispoldi ([email protected]), Musafiri Karama1 ([email protected]) and Paola Sechi ([email protected]) School of Veterinary Medicine, University of Perugia, Italy 1 Department of Paraclinical Sciences, Faculty of Veterinary Science, University of Pretoria Correspondence and present address: [email protected]; Tel.: (+39 075 595 7929), School of Veterinary Medicine, Via San Costanzo, 4 – 96126 Perugia, Italy Abstract: Antioxidants for foodstuffs during processing or before packing protects colour, aroma and nutrient content. As regards food safety regulations, long-term efforts have been made in terms of food standards, food control systems, food legislation and regulatory approaches. These have, however, generated several questions on how to apply the law to the diverse food businesses. To answer these questions, a thorough examination of the EU legislator’s choices for food preservation and definitions are provided and discussed with factors affecting microbial growth. Keywords: ascorbic acid; meat preparation; meat products, meat spoilage 1. Introduction Antioxidants are food additives and their use in meat is currently regulated by EC Regulation 1333/2008 [1], amended and supplemented by EU Regulation 1129/2011 [2] and EU Regulation 601/2014 [3]. Antioxidants are described (Annex 1 EC Regulation 1333/2008 [1]) as substances, which prolong food shelf life and protect them from deteriorating as a result of oxidation, such as rancid fat and colour changes. The antioxidants legally permitted in meat, without using the maximum dosage nevertheless, are: i) ascorbic acid and its salts, ii) citric acid and its salts.
    [Show full text]
  • Ga-Labeling: Laying the Foundation for an Anti-Radiolytic Formulation for NOTA-Sdab PET Tracers
    pharmaceuticals Article 68Ga-Labeling: Laying the Foundation for an Anti-Radiolytic Formulation for NOTA-sdAb PET Tracers Henri Baudhuin 1,*, Julie Cousaert 2, Philippe Vanwolleghem 1, Geert Raes 3,4 , Vicky Caveliers 1,2, Marleen Keyaerts 1,2 , Tony Lahoutte 1,2 and Catarina Xavier 1 1 Department of Medical Imaging (MIMA), Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090 Brussels, Belgium; [email protected] (P.V.); [email protected] (V.C.); [email protected] (M.K.); [email protected] (T.L.); [email protected] (C.X.) 2 Nuclear Medicine Department (NUCG), Universitair Ziekenhuis Brussel (UZ Brussel), Laarbeeklaan 101, B-1090 Brussels, Belgium; [email protected] 3 Unit of Cellular and Molecular Immunology (CMIM), Vrije Universiteit Brussel, Pleinlaan 2, B-1050 Brussels, Belgium; [email protected] 4 Myeloid Cell Immunology Laboratory (MCI), VIB Center for Inflammation Research, Pleinlaan 2, B-1050 Brussels, Belgium * Correspondence: [email protected]; Tel.: +32-2-477-4991 Abstract: During the preparation of [68Ga]Ga-NOTA-sdAb at high activity, degradation of the tracers was observed, impacting the radiochemical purity (RCP). Increasing starting activities in radiolabelings is often paired with increased degradation of the tracer due to the formation of free radical species, a process known as radiolysis. Radical scavengers and antioxidants can act as radioprotectant due to their fast interaction with formed radicals and can therefore reduce the degree of radiolysis. This study aims to optimize a formulation to prevent radiolysis during the labeling of 68 Citation: Baudhuin, H.; Cousaert, J.; NOTA derivatized single domain antibody (sdAbs) with Ga.
    [Show full text]
  • Interagency Committee on Chemical Management
    DECEMBER 14, 2018 INTERAGENCY COMMITTEE ON CHEMICAL MANAGEMENT EXECUTIVE ORDER NO. 13-17 REPORT TO THE GOVERNOR WALKE, PETER Table of Contents Executive Summary ...................................................................................................................... 2 I. Introduction .......................................................................................................................... 3 II. Recommended Statutory Amendments or Regulatory Changes to Existing Recordkeeping and Reporting Requirements that are Required to Facilitate Assessment of Risks to Human Health and the Environment Posed by Chemical Use in the State ............................................................................................................................ 5 III. Summary of Chemical Use in the State Based on Reported Chemical Inventories....... 8 IV. Summary of Identified Risks to Human Health and the Environment from Reported Chemical Inventories ........................................................................................................... 9 V. Summary of any change under Federal Statute or Rule affecting the Regulation of Chemicals in the State ....................................................................................................... 12 VI. Recommended Legislative or Regulatory Action to Reduce Risks to Human Health and the Environment from Regulated and Unregulated Chemicals of Emerging Concern ..............................................................................................................................
    [Show full text]
  • Ascorbic Acid Handling/Processing
    United States Department of Agriculture Agricultural Marketing Service | National Organic Program Document Cover Sheet https://www.ams.usda.gov/rules-regulations/organic/national-list/petitioned Document Type: ☐ National List Petition or Petition Update A petition is a request to amend the USDA National Organic Program’s National List of Allowed and Prohibited Substances (National List). Any person may submit a petition to have a substance evaluated by the National Organic Standards Board (7 CFR 205.607(a)). Guidelines for submitting a petition are available in the NOP Handbook as NOP 3011, National List Petition Guidelines. Petitions are posted for the public on the NOP website for Petitioned Substances. ☒ Technical Report A technical report is developed in response to a petition to amend the National List. Reports are also developed to assist in the review of substances that are already on the National List. Technical reports are completed by third-party contractors and are available to the public on the NOP website for Petitioned Substances. Contractor names and dates completed are available in the report. Ascorbic Acid Handling/Processing 1 Identification of Petitioned Substance 18 2 Chemical Names: 19 Trade Names: 3 Ascorbic Acid Magnorbin 4 L-Ascorbic Acid Ascorbicap 5 (2R)-2-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy- Hybrin 6 2H-furan-5-one Cescorbat 7 L-Threoascorbic Acid 8 CAS Numbers: 9 Other Names: 50-81-7 10 Vitamin C 11 Cevitamic Acid Other Codes: 12 Xyloascorbic Acid, L EC No. 200-066-2 13 Vitacimin ICSC No. 0379 14 Vitacin FEMA No. 2109 15 Ascoltin RTECS No.
    [Show full text]
  • Sodium Ascorbate Crystalline
    Product Information Product Data Sheet Sodium Ascorbate Crystalline Description Sodium Ascorbate Crystalline is a practically odourless powder. It decomposes at about 220 °C without melting sharply. Product identification Product code: 04 0817 4 Chemical names: 2,3-didehydro-L-threo-hexono-1,4-lactone sodium enolate; 3-oxo-L- gulofuranolactone sodium enolate Synonyms: sodium L-ascorbate; L-ascorbic acid monosodium salt; vitamin C (sodium salt) CAS No.: 134-03-2 HO H Chiral O EINECS No.: 205-126-1 O E No.: E 301 HO Empirical formula: C6H7NaO6 Molecular mass: 198.11 g/mol – + O OH Na Specifications Appearance: powder Colour: white to yellowish Fineness (US standard sieves): • through sieve No. 80 min. 98% • through sieve No. 100 min. 95% pH of a solution 10% in water: 7.0–8.0 Identity: corresponds Specific rotation: +103.0° to +108.0° (589 nm, 20°C, c = 10 in water) (on dry material) Loss on drying: max. 0.25% Related substances: • D-sorbosonic acid (impurity C) max. 0.15% • Methyl D-sorbosonate (impurity D) max. 0.15% • Unspecified impurities (each) max. 0.10% • Total* max.0.2% *Disregard limit 0.05% PDS 04 0817 4 Version 04 Sodium Ascorbate Crystalline 2011-05-23 pds0408174_04_sodiumascorbatecryst Replaces Version 03 2009-07-02 Page 1 of 3 Product Information Product Data Sheet Sodium Ascorbate Crystalline Heavy metals: max. 10 ppm Lead: max. 2 ppm Mercury: max. 1 ppm Zinc: max. 25 ppm Copper: max. 5.0 ppm Arsenic: max. 3 ppm Oxalic acid (impurity E): max. 0.3% Sulphates: max. 150 ppm Iron: max. 2.0 ppm Nickel: max.
    [Show full text]
  • And Calcium Ascorbate (E 302) As Food Additives1
    EFSA Journal 2015;13(5):4087 SCIENTIFIC OPINION Scientific Opinion on the re-evaluation of ascorbic acid (E 300), sodium ascorbate (E 301) and calcium ascorbate (E 302) as food additives1 EFSA Panel on Food additives and Nutrient Sources added to Food (ANS)2,3 European Food Safety Authority (EFSA), Parma, Italy ABSTRACT The EFSA Panel on Food additives and Nutrient Sources added to Food (ANS Panel) provides a scientific opinion re-evaluating the safety of ascorbic acid (E 300), sodium ascorbate (E 301) and calcium ascorbate (E 302) as food additives. The use of ascorbic acid and its salts as food additives was evaluated by the Joint FAO/WHO Expert Committee on Food Additives and by the Scientific Committee on Food. Ascorbic acid is absorbed from the intestine by a sodium-dependent active transport process and, at low doses, the absorption is almost complete until a saturation point, after which increasing amounts of unabsorbed substance are excreted. Ascorbic acid and its salts have very low acute toxicities, and short-term tests in animals showed little effect, and even so only at high doses. The Panel concluded that there is no genotoxicity concern for ascorbic acid, sodium ascorbate or calcium ascorbate. Long-term carcinogenicity tests with ascorbic acid did not show any chronic toxicity, even at high doses, and also showed no signs of carcinogenicity. Prenatal developmental studies did not show adverse developmental effects. The Panel estimated the combined exposure to ascorbic acid (E 300), calcium ascorbate (E 301) and sodium ascorbate (E 302). The Panel concluded that, given the fact that adequate data on exposure and toxicity were available and no adverse effects were reported in animal studies, there is no safety concern for the use of ascorbic acid (E 300), sodium ascorbate (E 301) and calcium ascorbate (E 302) as food additives at the reported uses and use levels and there is no need for a numerical ADI for ascorbic acid and its salts.
    [Show full text]
  • Draft Report on Carcinogens Monograph on Antimony Trioxide
    Draft Report on Carcinogens Monograph on Antimony Trioxide Peer-Review Draft November 29, 2017 Office of the Report on Carcinogens Division of the National Toxicology Program National Institute of Environmental Health Sciences U.S. Department of Health and Human Services This information is distributed solely for the purpose of pre-dissemination peer review under applicable information quality guidelines. It has not been formally distributed by the National Toxicology Program. It does not represent and should not be construed to represent any NTP determination or policy. This Page Intentionally Left Blank Peer-Review Draft RoC Monograph on Antimony Trioxide 11/29/17 Foreword The National Toxicology Program (NTP) is an interagency program within the Public Health Service (PHS) of the Department of Health and Human Services (HHS) and is headquartered at the National Institute of Environmental Health Sciences of the National Institutes of Health (NIEHS/NIH). Three agencies contribute resources to the program: NIEHS/NIH, the National Institute for Occupational Safety and Health of the Centers for Disease Control and Prevention (NIOSH/CDC), and the National Center for Toxicological Research of the Food and Drug Administration (NCTR/FDA). Established in 1978, the NTP is charged with coordinating toxicological testing activities, strengthening the science base in toxicology, developing and validating improved testing methods, and providing information about potentially toxic substances to health regulatory and research agencies, scientific and medical communities, and the public. The Report on Carcinogens (RoC) is prepared in response to Section 301 of the Public Health Service Act as amended. The RoC contains a list of identified substances (i) that either are known to be human carcinogens or are reasonably anticipated to be human carcinogens and (ii) to which a significant number of persons residing in the United States are exposed.
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET Preparation Date: 02/25/2015 Revision Date: 10/26/2018 Revision Number: G3 1. IDENTIFICATION Product identifier Product code: S1137 Product Name: SODIUM ASCORBATE, FCC Other means of identification Synonyms: Sodium L-AscorbateC SodiumAscorbic acid salt sodiumacid sodium saltL-Ascorbate CAS #: 134-03-2 RTECS # CI7671000 CI#: Not available Recommended use of the chemical and restrictions on use Recommended use: No information available. Uses advised against No information available Supplier: Spectrum Chemical Mfg. Corp 14422 South San Pedro St. Gardena, CA 90248 (310) 516-8000 Order Online At: https://www.spectrumchemical.com Emergency telephone number Chemtrec 1-800-424-9300 Contact Person: Martin LaBenz (West Coast) Contact Person: Ibad Tirmiz (East Coast) 2. HAZARDS IDENTIFICATION Classification This chemical is considered hazardous according to the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Not a dangerous substance or mixture according to the Globally Harmonized System (GHS) Combustible dust - Label elements Warning May form combustible dust concentrations in air Hazards not otherwise classified (HNOC) Not Applicable Other hazards Not available Product code: S1137 Product name: SODIUM 1 / 11 ASCORBATE, FCC Precautionary Statements - Prevention Keep away from all ignition sources including heat, sparks, and flame Keep container closed and grounded Prevent dust accumulations to minimize explosion hazard 3. COMPOSITION/INFORMATION ON INGREDIENTS Components CAS-No. Weight % Sodium Ascorbate 134-03-2 100 4. FIRST AID MEASURES First aid measures General Advice: National Capital Poison Center in the United States can provide assistance if you have a poison emergency and need to talk to a poison specialist. Call 1-800-222-1222.
    [Show full text]
  • Sodium Ascorbate
    SODIUM ASCORBATE Prepared at the 17th JECFA (1973), published in FNP 4 (1978) and in FNP 52 (1992). Metals and arsenic specifications revised at the 61st JECFA (2003). A group ADI ‘not specified’ was established for ascorbic acid and its Ca, K and Na salts at the 25th JECFA (1981). SYNONYMS INS No. 301 DEFINITION Chemical names Sodium ascorbate, sodium L-ascorbate, 2,3-didehydro-L-threo-hexono-1,4- lactone sodium enolate; 3-keto-L-gulofurano-lactone sodium enolate C.A.S. number 134-03-2 Chemical formula C6H7O6Na Structural formula Formula weight 198.11 Assay White or almost white, odourless crystalline powder which darkens on exposure to light DESCRIPTION Not less than 99% after drying FUNCTIONAL USES Antioxidant CHARACTERISTICS IDENTIFICATION Solubility (Vol. 4) Freely soluble in water; very slightly soluble in ethanol See description under TESTS Test for ascorbate Passes test Vol. 4) Test for sodium (Vol. 4) Passes test Test a solution of previously ignited sample, acidified with dilute acetic acid TS, filtered if necessary Reducing reaction A solution of the sample will decolourize a solution of 2,6-dichloro- phenolindophenol TS PURITY Loss on drying (Vol. 4) Not more than 0.25% (vacuum desiccator over sulfuric acid, 24 h) pH (Vol. 4) 6.5 - 8.0 (1 in 10 soln) Specific rotation (Vol. 4) [alpha] 25,D: Between +103o and +108o (10% (w/v) aqueous solution) Lead (Vol. 4) Not more than 2 mg/kg Determine using an atomic absorption technique appropriate to the specified level. The selection of sample size and method of sample preparation may be based on the principles of the method described in Volume 4, “Instrumental Methods.” METHOD OF Dissolve about 0.400 g of the dried sample in a mixture of 100 ml of carbon ASSAY dioxide-free water and 25 ml of dilute sulphuric acid TS.
    [Show full text]
  • Liposomal Vitamin C™ High Potency Vitamin C Using Liposomal Technology for Superior Absorption and Delivery
    Liposomal Vitamin C™ High potency vitamin C using liposomal technology for superior absorption and delivery Liposomal Vitamin C benefits: OVERVIEW • May help to reduce the severity Designs for Health’s Liposomal Vitamin CTM provides this key and duration of colds and flu foundational nutrient formulated with liposomal technology • Nutritional support for the immune for optimal absorption and bioavailability. Each 5 mL serving system (approximately 1 teaspoon) of this lemon flavoured formula • Antioxidant support provides 1000 mg vitamin C, as sodium ascorbate. The 130 mg sodium per serving facilitates absorption of • Assists in the maintenance and repair vitamin C via sodium-dependent transporters. of connective tissue KEY FEATURES: Immune system support immediately comes to mind when we think of vitamin C, but this nutrient has a host of roles in various tissues and systems beyond bolstering immune defences. As a cofactor for enzymes involved in the synthesis of serotonin and norepinephrine, adequate vitamin C levels may help individuals maintain a positive mental outlook and mount a healthy response to everyday stress. Its function in catecholamine synthesis may be why vitamin C has long been recognised as helping to support the adrenal glands. In fact, the adrenal glands contain one of the highest concentrations of vitamin C in the body (in both the cortex and medulla), underscoring that this nutrient is instrumental for far more than antioxidant effects.1 Vitamin C is required for function of the enzymes that transform the amino acids proline and lysine into hydroxyproline and hydroxylysine, key components for synthesis of collagen — including that which constitutes blood vessels — which underlies, in part, the crucial role of vitamin C in cardiovascular health, and explains why easy bruising and bleeding are signs of vitamin C deficiency.
    [Show full text]