Water Cooled Sharpening System Square Edge Jig the Tool from Slipping Off the Stone
Total Page：16
File Type：pdf, Size：1020Kb
Tormek Jig Solutions Included with the Tormek T-7 Square Edge Jig Square Edge Jig For plane irons and wood chisels. Max For plane irons and wood chisels. Max tool width 76 mm ( 3" ). Max tool thick- T-7 tool width 76 mm ( 3" ), max tool thick- ness 9 mm ( 3/8" ). Safety stops prevent ness 9 mm ( 3/8"). Safety stops prevent the tool from slipping off the stone. Water Cooled Sharpening System Square Edge Jig the tool from slipping off the stone. Truing and Dressing Tool Planer/Jointer Blade Jig Trues the grindstone exactly round and For blades of any length. Blades Safety Stop Safety Stop flat. Guided by the Universal Support, longer than 270 mm (10 1⁄2" ) Universal Support which also guides the jigs. Dual knobs are relocated in the blade holder. • For vertical or horizontal mount. for smooth feed across the stone. Min width of blade 13 mm ( 1⁄2" ). • Micro adjust with scale for each 0.25 mm ( 0.01" ). Stone Grader Moulding Knife Jig The fine side grades the stone for a 1000 For all makes and shapes of moulding grit finish. The coarse side of the grader knives with 24, 30 or 38 mm distance reverses the stone to normal fast grinding. between guide hole centres. Max width Activates a glazed stone. of blade 100 mm ( 4"). Tormek Grindstone 220 grit Can be graded with the SP-650 AngleMaster Sets and measures the edge angle. Adjust- Gouge and Turning Cutter Jig for a 1000 grit surface. able to any stone diameter from ∅ 250 mm For fingernail shaped turning gouges Leather Honing Wheel of any geometry. Plus shaft for turning (10" ) down to ∅ 150 mm ( 6" ). Measures cutters. Also for bent carving gouges from 10° to 75°. Magnets keeps it in place. and V-tools. Max tool width 25 mm (1" ). Stainless Steel Shaft Honing Compound For application on the leather honing Multi Jig wheels. Grain size 3 micron ( average ). For turning skew chisels, parting and Removes the burr and polishes the beading tools and roughing gouges. edge to a mirror finish. Straight carving gouges up to 50 mm ( 2" ) width. Removable Handbook Water Trough Explains the basics in sharpening and how to best work with the Tormek Short Tool Jig system. Hardcover, with 156 pages and For straight shanked carving gouges 560 line drawings. By Torgny Jansson. and V-tools down to 45 mm (1 3⁄4" ) length. AngleMaster Short wood chisels and tools for power carvers. Max tool width 32 mm (1 1⁄4" ). Tormek DVD Brings the Handbook instructions to life. 24 minute including a 4 minute introduction Tool Rest with Torlock to the Tormek way of sharpening. For turning scrapers, hollowing tools and Y Design Patents Powerful Industrial AC motor T thin parting tools. Also for cabinet scrapers, Sweden 77038 screwdrivers and spoke shave blades. • Minimal RPM loss under load N A Europe 35092 • Power 200 W ( input ) USA D 490, 522 7 • Maintenance free RR YeaR A • Continuous duty Additional Accessories Axe Jig W For carving and carpenter’s axes. Max height of axe 170 mm ( 6 1⁄2" ). Turning Tool Setter Copes with both straight and Replicates the geometry on turning curved edges. Always a Perfect Grindstone The Ultimate Solution for Square Edges gouges and skews when using the SVD-185 and SVS-50 jigs. A grinding stone should run true and have a flat surface to give a When mounting a wood chisel, conventional jigs need manual alignment With built in edge geometries. Knife Jig good result. The Tormek T-7 therefore comes with a unique Truing and therefore the grinding can become out of square. The Tormek Square For most knives. Width 45 mm (1 3⁄4"). and Dressing Tool, TT-50 and a Stone Grader, SP-650, so you can Edge Jig SE-76 automatically aligns the tool using its upper and flat side, Woodturner’ s Instruction Box Long knives need to be stiff. Min blade keep your grindstone in perfect condition. which ensures a 90° edge. Contains TNT DVD film and detailed length 60 mm ( 2 3/8" ). Also for carver’s Handbook. Shows how to shape, sharpen draw knives. • Unlike conventional and hone all your turning tools. jigs, the upper and flat side of the tool Long Knife Jig is always parallel to Suitable for long and flexible knives. Profiled Leather Honing Wheels the Universal Support. The 100 mm ( 4" ) width of the jig For the inside honing and polishing of Mounts instantly in a stabilizes a thin blade. Min blade Precise setting of cutting Dual knobs for smooth • Special designed turning gouges, carving gouges and fixed position on the Tormek Square Edge Jig Conventional Jigs depth with Micro Adjust. feed across the stone. V-tools. With exchangeable profiles. length 120 mm ( 4 3/4" ). Universal Support. mounting clamp ensures firm mount- Mounts outside the standard honing wheel. ing even of tapered Scissors Jig Choice of feeding 90 sec 30 sec chisels. Machine Cover For scissors of all sizes and shears. speed determines For protecting the machine the stone character • Safety stops prevent Also suitable for portable electric from shavings and wood dust. hand planer blades. – a faster feed causes the tool from slipping the stone to grind faster. Fine surface Coarse surface off the stone. Tormek Square Edge Jig Conventional Jigs Tormek T-7 Sharpening System “ When used with all of its optional toolholding jigs, the TORMEK T-7, SE-76, TT-50, SP-650, WM-200, PA-70, HB-10, DVD-1 Tormek delivered sharp, clean edges on every tool we Easy Sharpening TNT-708 Woodturner’s Kit could find in the shop, so it earns Top Tool honours ”. SVD-185, SVS-50, SVD-110, LA-120, MH-380, TTS-100, TNT-300 Steve Oswalt, Tool Review HTK-705 Hand Tool Kit With Full Control WOOD Magazine, USA SVM-45, SVM-100, SVX-150, SVA-170, SVS-32 Grinding Jigs SVH-320 Planer/Jointer Blade Jig “ As a woodworker and woodcarver for 20 years, SVP-80 Moulding Knife Jig I’ve been plagued by multiple bevels on my tools, SE-76 Square Edge Jig × cutting angles that were too short or too long, and SVD-185 Gouge and Turning Cutter Jig × blued edges. After dispensing with silicon carbide wheels, I mounted aluminium oxide wheels on my SVS-50 Multi Jig × grinder – white, blue and pink in color. Eventually SVS-32 Short Tool Jig × I abandoned them for a horizontal grinding wheel. SVD-110 Tool Rest with Torlock × It seems I was always searching for the perfect grind- SVA-170 Axe Jig × ing system to put an edge on my tools as quickly SVM-45 Knife Jig × The key word when sharpening the Tormek way is as possible. I purchased as many holding fixtures, SVM-100 Long Knife Jig × repeatability. The tools are guided in jigs – you remove but I still felt that I was the victim of guesswork. SVX-150 Scissors Jig × only a minute fraction of the steel at each sharpening, Recently, however, I discovered Tormek , and it’s which makes it fast. An extra benefit is that your tools a dream come true – a machine that sharpens Accessories last longer. and hones with the precision of a surgical team.” TT-50 Truing and Dressing Tool × Roger Schroeder WM-200 AngleMaster × You can shape the tool exactly to your needs. Even such Wood Carving Illustrated, USA SP-650 Stone Grader × complicated shapes as fingernail turning gouges, spoon LA-120 Profiled Leather Honing Wheel × carving gouges and oval skew chisels with a radiused LA-124 Narrow discs for LA-120 edge are easily sharpened. Once the shape is created, you can resharpen the edge in less than a minute. PA-70 Honing Compound × “ I can grind and sharpen quicker and more accurately TTS-100 Turning Tool Setter × The water cooled slow speed grindstone is in harmony using the Tormek, which means I produce more work MH-380 Machine Cover × in a given time – and thus earn more money ! ” with the physical laws governing the steel tool – the HB-10 Handbook × edge does not overheat and lose its hardness. Jim Kingshott DVD-1 Tormek DVD × Traditional Woodworking, UK TNT-300 Woodturner’s Instruction Box × You finish the sharpening process on the leather honing wheel, which lets you polish the edge to a razor sharpness. Upgrade parts for earlier models XB-100 Horizontal Base for the Universal Support No grinding dust is produced to pollute the air. The steel “ Speed of sharpening depends as much or more on US-105 Universal Support with Micro Adjust particles are deposited into the water trough. how much steel has to be removed as how fast the TT-50U Stone Truing tool without diamond tip steel is removed. High speed grinders can remove a The Tormek method is safe. At the low speed, you can large amount of steel relatively quickly, but for most fully control the sharpening. Since no sparks are produced, uses, the angles have already been established. there is no risk to your eyes and you can safely use the Dimensions Motor Afterwards, only a small amount of removal is needed machine in areas of high fire risk. Width 270 mm (10 5/8") Industrial single phase to resharpen. The more accurately the original angle Depth 250 mm (10") 200 W (input) 230 V, 50 Hz or can be duplicated, the faster the process. For turning Height 325 mm (12 3⁄4" ) 115 V, 60 Hz, Continuous duty S1 Since 1973 Tormek has introduced many new tech- Maintenance free tools, in particular, this is what makes the Tormek Grindstone niques and set the standard in water cooled sharpening.