DOCSLIB.ORG

Tube Number Manufacturer Tube Description Isotope Activity 0A2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tube Number Manufacturer Tube Description Isotope Activity 0A2 Tube Number Manufacturer Tube Description Isotope Activity 0A2 Raytheon Voltage Regulator Co-60 0.2 µCi 0A2WA/6626 Voltage Regulator Ra-226 6 µCi 0.005 0A2WA/6626 Voltage Regulator Ra-226 µCi 0A2WA/6626 CBS Hytron Voltage Regulator Ni-63 0.5 µCi 0A2WA/6626 English Elec. Valve Voltage Regulator U-238 0.1 µCi 0A2WA/6626 Tung-Sol Voltage Regulator Ni-63 Unknown 0A2WA/6626 Raytheon Voltage Regulator Co-60 0.2 µCi 0A3 Sylvania Voltage Regulator Co-60 1.0 µCi 0B2 Raytheon Voltage Regulator Co-60 0.2 µCi 0B2WA/6627 English Elec. Valve Voltage Regulator U-238 0.1 µCi 0B2WA/6627 Raytheon Voltage Regulator Co-60 0.2 µCi 0B2WA/6627 Heintz & Kaufman Voltage Regulator Ra-226 6.0 µCi 0C3 Sylvania Voltage Regulator Co-60 1.0 µCi 0C3W Sylvania Voltage Regulator Co-60 1.0 µCi Unknow 003-2 Amperex Voltage Regulator Unknown n 1B22 Bomac Spark-Gap Radar Modulator Co-60 0.25 µCi 1B22 Western Electric Spark-Gap Radar Modulator Ra-226 Unknown 1B23 Central Electron. Spark-Gap Switch Co-60 1.0 µCi 1B24A Bomac Transmit-Receive Switch Co-60 0.15 µCi 0.475 1B24A General Electric Transmit-Receive Switch Co-60 µCi 1B24A Microwave Assoc. Transmit-Receive Switch Co-60 0.5 µCi 1B24A Omni-Wave Transmit-Receive Switch Co-60 0.23 µCi 1B24A Sylvania Transmit-Receive Switch Co-60 1.0 µCi 1B24A Westinghouse Transmit-Receive Switch Ra-226 2.0 µCi 1B24A Metcom Transmit-Receive Switch Co-60 Unknown 1B26 Bomac Transmit-Receive Switch Co-60 0.15 µCi 1B27 Bomac Transmit-Receive Switch Co-60 0.15 µCi 1B35 Westinghouse Anti-Transmit-Receive Switch Ra-226 >4.3 µCi 1B35A Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 1B35A General Electric Anti-Transmit-Receive Switch Co-60 0.95 µCi 1B35A Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 1B37A Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 1B37A General Electric Anti-Transmit-Receive Switch Co-60 0.95 µCi 1B37A Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 0.475 1B38 Western Electric Pre-Transmit-Receive Switch Co-60 µCi 11339 Bomac Gas Switching Co-60 0.3 µCi 1B41 Bomac Spark Gap Radar Modulator Co-60 0.25 µCi 1B41 Western Electric Spark Gap Radar Modulator Ra-226 1.0 µCi 1B41 Westinghouse Spark-Gap Radar Modulator Ra-226 Unknown 1B42 Machlett Spark-Gap Radar Modulator Ra-226 1.0 µCi 1B44 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 0.475 1B44 General Electric Anti-Transmit-Receive Switch Co-60 µCi 1B44 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 1B45 Bomac Spark Gap Radar Modulator Co-60 0.25 µCi 1B45 Western Electric Spark Gap Radar Modulator Ra-226 2.0 µCi 1B50 Bomac Transmit-Receive Switch Co-60 0.15 µCi 1B51 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 1B53 Bomac Anti-Transmit-Receive Switch Co-60 .3 µCi 1B54 Bomac Pre-Transmit-Receive Switch Co-60 0.3 µCi 1B55 Bomac Transmit-Receive Switch Co-60 0.4 µCi 1B56 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 0.475 1B56 General Electric Anti-Transmit-Receive Switch Co-60 µCi 1B56 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 1B58A/6117 Bomac Transmit-Receive Switch Co-60 0.1 µCi 0.475 1B58A/6117 General Electric Transmit-Receive Switch Co-60 µCi 1B58A/6117 Microwave Assoc. Transmit-Receive Switch Co-60 0.5 µCi 1B58A/6117 Sylvania Transmit-Receive Switch Co-60 1.0 µCi Unknow 1B59/R1130B Sylvania Cold-Cathode FAX Unknown n 1B60 Bomac Transmit-Receive Switch Co-60 0.15 µCi 1B60 Bomac Transmit-Receive Switch Co-60 0.15 µCi 1B60 Westinghouse Transmit-Receive Switch Ra-226 2.0 µCi 0.7-10 1B63A Microwave Assoc. Fixed Tuned Gas Switchina., Co-60 µCi 1B63A,B Bomac Transmit-Receive Switch Co-60 0.15 µCi 0.475 1B63A,B General Electric Transmit-Receive Switch Co-60 µCi 1B63A,B Microwave Assoc. Transmit-Receive Switch Co-60 0.5 µCi 1B63A,B Sylvania Transmit-Receive Switch Co-60 1.0 µCi 0.002 1C21/5823 Sylvania Cold-Cathode Triode Relay Kr-85 µCi 1Z2 Chatham Rectifier Th-232 Unknown 3B24WA RCA Radar Transmitting Rectifier Th-232 0.15 µCi 3CX3000 Varian Power Triode Th-232 Unknown 12AT7 Phillips High-mu Dial Triode Re-187 .1 µCi Unknow 12AX7/575I Duotriode Unknown n 290-1343-PI Raytheon Co-60 0.8 µCi 313C Western Electric Double-Gap Cold-Cathode Triode Kr-85 0.5 µCi 313C Western Electric Double-Gap Cold-Cathode Triode Ra-226 0.05 µCi 313CA Western Electric Double-Gap Cold-Cathode Triode Kr-85 0.5 µCi 313CA Western Electric Double-Gap Cold-Cathode Triode Ra-226 0.05 µCi 313CB Western Electric Double-Gap Cold-Cathode Triode Kr-85 Unknown 313CC Western Electric Double-Gap Cold-Cathode Triode Ra-226 0.01 µCi 313CC Western Electric Double-Gap Cold-Cathode Triode Kr-85 0.5 µCi 313D Western Electric Double-Gap Cold-Cathode Triode Kr-85 0.50 µCi 346B Western Electric Cold-Cathode Triode Ra-226 1.0 µCi 346C Western Electric Cold-Cathode Triode Kr-85 4.5 µCi 353A Western Electric Cold-Cathode Triode Kr-85 0.5 µCi 353A Western Electric Cold-Cathode Triode Ra-226 0.01 µCi 357 Bomac Co-60 Unknown 358A Western Electric Cold-Cathode Indicator Kr-85 0.05 µCi 359A Western Electric Cold-Cathode Relay Kr-85 0.5 µCi 359A Western Electric Cold-Cathode Relay Kr-85 0.5 µCi 371B EEC Diode Rectifier Th-232 0.15 µCi 372A Western Electric Cold-Cathode Voltage Regulator Ra-226 Unknown 376A Western Electric Cold-Cathode Voltage Regulator Ra-226 Unknown 376A Westinghouse Kr-85 4.0 µCi 376B Western Electric Cold-Cathode Voltage Regulator Ra-226 1.0 µCi 376C Western Electric Cold-Cathode Voltage Regulator Kr-85 1.2 µCi Unknow 412A AT&T Full-Wave Rectifier Unknown n Unknow 412A Western Electric Full-Wave Rectifier Unknown n 413* Anton C-14 1.0 µCi 413A Western Electric Cold-Cathode Relay Ra-226 1.0 µCi 413B Western Electric Cold-Cathode Relay Kr-85 4.4 µCi 414 Anton C-14 1.0 µCi 421 Anton C-14 1.0 µCi 423A/6140 Western Electric Cold-Cathode Voltage Regulator Ra-226 0.01 µCi 423C Western Electric Cold-Cathode Voltage Regulator Kr-85 4.5 µCi 425A Western Electric Cold-Cathode Relay Kr-85 2.1 µCi 426A Western Electric Cold-Cathode Ringer Kr-85 2.0 µCi 427A/6141 Western Electric Cold-Cathode Kr-85 4.0 µCi 430A Western Electric Cold-Cathode Ra-226 Unknown 430B Western Electric Cold-Cathode Kr-85 4.5 µCi 430C Western Electric Cold-Cathode Kr-85 >15 µCi 432B Western Electric Cold-Cathode Voltage Reference Kr-85 4.5 µCi 439A/6167 Western Electric Gas Discharge Stepping Kr-85 0.5 µCi 446A Western Electric Cold-Cathode Kr-85 0.1 µCi 447A Western Electric Cold-Cathode Indicator Kr-85 0.1 µCi 451A Western Electric Cold-Cathode Relay Kr-85 2.1 µCi 458A Western Electric Voltage Surge Protector Ra-226 1 µCi Unknow 471A General Electric Voltage Surge Protector Unknown n 475 Anton C-14 1.0 µCi 476 Anton C-14 1.0 µCi 721B Bomac Double-Gap Gas Switch Co-60 0.15 µCi 724B Bomac Transmit-Receive Switch Co-60 0.15 µCi 809 RCA Transmitting Triode Th-232 0.15 µCi Unknow 1960/30Z RCA Gas Switching Unknown n 5027 Ra-226 0.26 µCi 0.005 5651WA/STV85 Neon Voltage Reference Ra-226 µCi 5651WAYSTV85 Raytheon Neon Voltage Reference Co-60 0.2 µCi 5682 Machlett Transmitting Triode Th-232 0.13 µCi Unknow 5751/12AX7 Duotriode Unknown n 5783WA/M8190/85A Raytheon Voltage Reference Co-60 0.2 µCi 3 5787 Raytheon Voltage Regulator Co-60 0.2 µCi 5787WA Raytheon Voltage Regulator Co-60 0.2 µCi 5787WB Raytheon Voltage Regulator Co-60 0.2 µCi 5790/X7108 Sylvania Transmit-Receive Switch Co-60 1.0 µCi 5791/Z6007 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 5792/ATR345 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 5792/ATR345 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 5793/ATR346 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 5793/ATR346 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 0.002 5823/1C21 Sylvania Cold-Cathode Triode Relay Kr-85 µCi 5853/1C21 Bomac Transmit-Receive Switch Co-60 0.3 µCi 5853/TR368 Bomac Transmit-Receive Switch Co-60 0.3 µCi 5853/TR368 Bomac Transmit-Receive Switch Co-60 0.4 µCi 5853/TR368 Microwave Assoc. Transmit-Receive Switch Co-60 0.5 µCi 5853/TR368 Sylvania Transmit-Receive Switch Co-60 1.0 µCi 5863/X7109 Bomac Transmit-Receive Switch Co-60 0.15 µCi 5863/X7109 Sylvania Transmit-Receive Switch Co-60 1.0 µCi 5864/ATR321 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 5864/ATR321 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 5865/TR361 Bomac Transmit-Receive Switch Co-60 0.15 µCi 5865/TR361 Sylvania Transmit-Receive Switch Co-60 1.0 µCi 5883 Litton Anti-Transmit-Receive Switch Co-60 1.0 µCi 5921 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 5922 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 5927 Bomac Transmit-Receive Switch Co-60 0.4 µCi 5939 Westinghouse Pre-Transmit-Receive Switch Ra-226 3.3 µCi 5939A Bomac Pre-Transmit-Receive Switch Co-60 0.3 µCi 5939A Pre-Transmit-Receive Switch Ra-226 3.3 µCi 5962 Voltage Regulator C-14 10.0 µCi 5962/8S- Anton Voltage Regulator C-14 1.0 µCi 101/C1K1017 5962/BS-101/CK1017 Electronic Products Voltage Regulator Ni-63 3.0 µCi 6022/ATR332 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 6024/ATR387A Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 6035 Bomac Transmit-Receive Switch Co-60 0.15 µCi 6081/ATR407 Bomac Anti-Transmit-Receive Switch Co-60 0.3 µCi 6081/ATR407 Sylvania Anti-Transmit-Receive Switch Co-60 1.0 µCi 6083/AX9909 Bomac Transmitting Pentode Co-60 0.3 µCi 6117/1B58 Bomac Transmit-Receive Switch Co-60 0.4 µCi 0.475 6117/1B58 General Electric Transmit-Receive Switch Co-60 µCi 6117/1B58 Microwave Assoc.
Load more

Recommended publications
  • X-Ray Spectra from a Brass-Target Plasma Triode Abstract in This
    X-ray Spectra from a Brass-target Plasma Triode Eiichi SATO, Haruo OBARA, Toshiyuki ENOMOTO, Etsuro TANAKA Hidezo MORI, Toshiaki KAWAI, Toshio ICHIMARU, Akira OGAWA Shigehiro SATO, Kazuyoshi TAKAYAMA Jun ONAGAWA I) Department of Physics , Iwate Medical University 2) Department of Radiological Technology , College of Medical Science, Tohoku University 3) The 3rd Department of Surge ry, Toho University School of Medicine 4) Department of Nutrition al Science, Faculty of Applied Bioscience, Tokyo University of Agriculture 5) Department of Cardiac Physiology , National Cardiovascular Center Research Institute 6) Electron Tube Division #2, Hamamatsu Photonics K. K. 7) Department of Radiologi cal Technology, School of Health Sciences, Hirosaki University 8) Department of Neurosurgery , School of Medicine, Iwate Medical University 9) Department of Microbiolog y, School of Medicine, Iwate Medical University 10) Tohoku University Biomedical Engineering Research Organization II) Department of Electronics , Faculty of Engineering, Tohoku Gakuin University Research Code No.: 200, 204.1 Keywords:Flash x-ray,Brass target, Weaklyionized linear plasma, Characteristicx-rays, Absorptionof zinc Kj3rays Abstract In this paper, we describe a recentlydeveloped table-top plasma x-ray generator utilizing a brass-targettriode, which we used in preliminary experiments for the superpositionof K-series characteristicx-rays in weakly ionized plasma and for producing their higher harmonics. In the plasma flash x-raygenerator, a 200 nF condenser was charged,and flash x-rays were producedby discharging.The x-ray tube was a demountabletriode with a brass target containing65% copper and 35% zinc by weight, and a turbomolecularpump evacuatedair from the tube with a pressure of 1 mPa. Targetevaporation led to the formationof weakly ionized linear plasma, consistingof metal ions and electrons,around the rod target, and intense characteristicx-rays were produced.
    [Show full text]
  • High Speed Plasma Diagnostics for Laser Plasma Interaction and Fusion Studies
    Sadhan& Vol. 24, Part 6, December 1999, pp. 513 549. ~' Printed in India High speed plasma diagnostics for laser plasma interaction and fusion studies V N RAI, M SHUKLA, H C PANT and D D BHAWALKAR Laser Programme, Centre for Advanced Technology, PO CAT, Indore 452 013, India e-mail: [email protected] MS received 26 February 1998; revised 25 May 1999 Abstract. Laser plasma interaction and fusion studies involve many high speed plasma diagnostics to determine the various parameters for explaining the physical processes taking place in plasma. Detection and analysis of short-term or transient radiations (X-ray and visible) are the bases for diagnosing the physical processes occurring during laser-plasma interaction or similar radiation-emitting processes. This paper reviews the development of various high speed plasma diagnostics which are not only applicable in determining the temporal, spatial and spectral properties of X-rays for this purpose but also have wide use in various other fields of research. Keywords. Laser-plasma interaction; fusion studies; transient radiations; high speed plasma. 1. Introduction Interaction of a high intensity laser light with matter (solid target) first vaporizes material from the surface which ultimately gets converted into plasma (ionized gas). This laser produced plasma expands into the vacuum where propagation of laser light is modified by the free electrons present in the plasma (Jacob et al 1976; Cairn & Sanderson 1980; Max 1982; Kruer 1988; Radziemski & Cramers 19891. The plasma formed by a high intensity or small time duration laser has very steep density and temperature gradients as compared to the plasma formed by the low intensity or long time duration laser.
    [Show full text]
  • INFORMATION CIRCULAR Original: ENGLISH (Unofficial Electronic Edition) ______
    INF INFCIRC/254/Rev.3/Part 2*/ 24 February 1998 International Atomic Energy Agency GENERAL Distr. INFORMATION CIRCULAR Original: ENGLISH (Unofficial electronic edition) ___________________________________________________________________________ COMMUNICATION RECEIVED FROM CERTAIN MEMBER STATES REGARDING GUIDELINES FOR THE EXPORT OF NUCLEAR MATERIAL, EQUIPMENT AND TECHNOLOGY Nuclear-related Dual-use Transfers 1. The Director General has received notes verbales dated 30 September 1997 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Bulgaria, Canada, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, New Zealand, Norway, Poland, Portugal, Romania, the Russian Federation, the Slovak Republic, South Africa, Spain, Sweden, Switzerland, Ukraine, the United Kingdom of Great Britain and Northern Ireland, and the United States of America relating to the export of nuclear material, equipment and technology. 2. The purpose of the notes verbales is to provide further information about the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Material and related Technology in accordance with which the relevant Governments act. 3. In the light of the wish expressed at the end of each note verbale, the text of the notes verbales is attached. The attachment to these notes verbales is also reproduced in full. _____________________ */ INFCIRC/254/Rev.3/Part 1 contains Guidelines for Nuclear Transfers ANNEX NOTE VERBALE The Permanent Mission of [Member State] presents its compliments to the Director General of the International Atomic Energy Agency and has the honour to refer to its [relevant previous communication(s)] concerning the decision of the Government of [Member State] to act in accordance with the Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material and Related Technology currently published as document INFCIRC/254/Rev.2/Part 2/MOD.
    [Show full text]
  • Appendix I Klhctrohics for Magihg Atom Probe 1.1
    APPENDIX I KLHCTROHICS FOR MAGIHG ATOM PROBE 1.1 ZHTRODDCTIOH The major limitation of PIM lies in its inability to chemically identify the imaging species. The atom probe PIM^ can give us the information about the chemical nature of a single atom (or a group of atoms) on the specimen tip surface. Panitz '-^ introduced a new technique known as Imaging Atom Probe (lAP), which gives the spatial distribution of the surface species. It mass analyzes the field evaporated species from the specimen surface on the basis of time of flight mass spectroscopy. The lAP, which is essentially a field desorption microscope with time gated microchannel plate (MCP) detector, is a powerful tool for studying a number of metallurgical problems. The electronic circuitry built in this laboratory for the lAP (figure 1.1) consisted of (i) two high voltage nanosecond pulsers, one for field evaporation from the tip and another for MCP activation, (ii) a variable delay network, and (iii) a master pulser to synchronize the whole operation. The two high voltage pulsers were identical, except the output pulse amplitude. Each of them comprised of the Krytron pulser and the avalanche transistor pulser used for grid triggering the Krytron. The combination of the master pulser and the variable delay network was used to get the two pulses having an adjustable time interval between them. These pulses were used to tri^er the avalanche transistor pulsers. Thus, the high voltage pulse for field evaporation and the MCP activation pulse after a presettable time delay "t" were obtained. The time gated images of the desired species are obtainable by deciding the delay time from following equation 73 CRYOSTAT ChteVRON MICROCHANNEL ^ PLATE - SCREEAi '4 ;5 ^ lOM —WWW -• +5 kV ^Vdc -vv5/J^ -• + 1-3kV 50M -VWWw -• + 0-3 kV 500 pP 5wi i:_--500p F X KRYTRON KRYTRON PULSER PULSER AVALANCHE VARIABLE AVAL/INCHE TR-ANSISTOR TRANSfS TOR PELAY PULSER PULSER NETWORK M/^STER PULSER.
    [Show full text]
  • Master Product Fisting
    Richardson "' Electronics, Ltd. Master Product fisting Part #and Description Guide • Electron Tubes • Semiconductors r Electron Tubes Part Description Part # Description Part # Description LCMG-B X-Ray Tube 2AS15A Receiving Rectifier QB3.5/750GA Power Tetrode QEL1/150 Power Tetrode 2AV2 Receiving Tube 6163.5/750/6156 Power Tetrode CCS-1/Y799 CC Power Tetrode 2822 Planar Diode QBL3.5/2000 Power Triode PE1/100/6083 Power Pentode 2B35/EA50 UHF Diode W3/2GC TWi C1A Thyratron 2694 Twin Tetrode W3/2GR TWi GV1A-1650 Corona Voltage Reg 2BU2/2AS2A/2AH2 Receiving Tube 61QV03/20A UHF Twin Tetrode CE1A/B Phototube 2C36 UHF Triode QQE03/20/6252 UHF Twin Tetrode 1A3/DA90 Mini HF Diode 2C39A Planar Triode QQE03/12/6360A Twin Tetrode 1AD2A/1BY2 Receiving Tube 2C39BA Planar Triode OE3/85A1 Voltage Regulator C1 B/3C31 /5664 Thyratron 2C39WA Planar Triode OG3/85A2 MIN Volt Regulator 1B3GT/1 G3GT Receiving Tube 2C40A Planar Triode QB3/200 Power Tetrode 1B35A ATR Tube 2C43 Planar Triode QB3/300 Power Tetrode 1658A TR Tube 2C51/396A MIN Twin Triode QB3/300GA Power Tetrode 1859/R1130B Glow Modulator 2C53 High Voltage Triode T83/750 Power Triode 1B63B TR Tube 2CW4 Receiving Tube OA3NR75 Voltage Regulator 1885 Geiger-Mueller Tube 2D21 Thyratron OB3NR90 Voltage Regulator 1BQ2IDY802 Receiving Rectifier 2D21W/5727 MIN Thyratron OC3NR105 Voltage Regulator 1C21 Cold Cathode 2D54 Receiving Tube OD3NR150 Voltage Regulator 1D21 /SN4 Cold Cathode Dischg 2E22 Pentode OB3A Receiving Tube 1G3GT/ 1B3GT Receiving Tube 2E24 Beam Amplifier OC3A Voltage Regulator 1G35P Hydrogen Thyratron 2E26 Beam Amplifier OD3A Voltage Regulator 1HSGT Recv.
    [Show full text]
  • Electronic Circuits for Switching-Time Reduction of Bipolar Semiconductor Devices
    Proceedings of the 13th WSEAS International Conference on CIRCUITS Electronic Circuits for Switching-Time Reduction of Bipolar Semiconductor Devices N. Y. A SHAMMAS, S.EIO, D. CHAMUMD Staffordshire University, Stafford, UK, [email protected], www.staffs.ac.uk Abstract: Bipolar semiconductor devices are often used as switches in very high power electronic circuits and systems. They have replaced the old conventional gas filled tubes and vacuum devices in many applications. This is mainly due to the fact that solid-state devices are more efficient, smaller in size, cheaper and more reliable. In addition, solid-state devices are considered environmental friendly, since they do not contain nasty gases and toxic materials used in old devices. The power level requirements and switching frequency are continually increasing in the power electronic industry, and this demands larger and faster switching devices. As a result, both bipolar and unipolar semiconductor devices have undergone continued improvement in current and voltage ratings, and switching speed. The main advantage of bipolar devices is their low conduction losses due to conductivity modulation, but their main disadvantage is the high switching losses which is due to minority carrier injection. The Insulated Gate Bipolar Transistor (IGBT) combines the advantages of both unipolar and bipolar devices. It has a simple gate drive circuit like that of the MOSFET, with high current and low saturation voltage capability of bipolar transistor. The main problem remains with the relatively long tail turn-off current. To reduce the turn-off time of the IGBT and other bipolar devices, different lifetime control techniques and structural changes have been developed and used.
    [Show full text]
  • Analysis of Hv-Pulses from Krytron and Relay Pulsers P
    ANALYSIS OF HV-PULSES FROM KRYTRON AND RELAY PULSERS P. Mertens, B. Kell, H. Krüger-Elencwajg To cite this version: P. Mertens, B. Kell, H. Krüger-Elencwajg. ANALYSIS OF HV-PULSES FROM KRYTRON AND RELAY PULSERS. Journal de Physique Colloques, 1984, 45 (C9), pp.C9-323-C9-327. 10.1051/jphyscol:1984954. jpa-00224440 HAL Id: jpa-00224440 https://hal.archives-ouvertes.fr/jpa-00224440 Submitted on 1 Jan 1984 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. JOURNAL DE PHYSIQUE Colloque C9, supplément au n°12, Tome 45, décembre 198* page C9-323 ANALYSIS OF HV-PULSES FROM KRYTRON AND RELAY PULSERS P. Mertens, B. Kell and H. Kriiger-Elencwajg Hdhn-Meitner-Institut fiir Kernforsohicng Berlin, Glienioker Str. 100, D-1000 Berlin 39, F.R.G. Résumé - L'analyse directe de hauteur d'impulsion est appliquée à l'étude de la distribution en amplitude et en hauteur d'impulsion des signaux H.T. produits par les pulseurs à relais et à krytron communément utilisés sur les microscopes ioniques de champs équipés d'une sonde à atomes. Les fonc­ tions V , ^ ,,- •,. (V, , , , • ) sont dérivées dans hauteur d impulsion v de charge de pulseur' les deux types de pulseurs.
    [Show full text]
  • INFCIRC/254/Rev.10/Part 2 Attachment
    Information Circular INFCIRC /254/Rev.10/Part 2 a Date: 8 November 2016 General Distribution Original: English Communication received from the Permanent Mission of the Republic of Korea to the International Atomic Energy Agency regarding Certain Member States’ Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology 1. The Secretariat has received a note verbale from the Permanent Mission of the Republic of Korea, dated 24 October 2016, in which it requests that the Agency circulate to all Member States, a letter of 21 October 2016 from the Chairperson of the Nuclear Suppliers Group, Ambassador Young- wan Song, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Serbia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America b, providing further information on those Governments' Guidelines for Nuclear Transfers. 2. In light of the wish expressed in the above-mentioned note verbale, the text of the note verbale, as well as the letter and attachments thereto, are hereby reproduced for the information of all Member States. __________________________________________________________________________________ a INFCIRC/254/Part 1, as amended, contains Guidelines for the export of nuclear material, equipment and technology. b The European Commission and the Chair of the Zangger Committee participate as observers.
    [Show full text]
  • High Power Switching Devices: Past, Present and Future
    RECENT ADVANCES in CIRCUITS, SYSTEMS, SIGNAL and TELECOMMUNICATIONS High Power Switching Devices: Past, Present and Future N. Y. A SHAMMAS, S.EIO, D. CHAMUMD Staffordshire University, Stafford, UK, [email protected], www.staffs.ac.uk Abstract Switching devices are key components in any power electronic circuit or system as they control and limit the flow of power from the source to the load. Their power level requirements (current & voltage) and switching frequency are continually increasing in the power electronic industry, and this demands larger and faster switching devices. This paper will focus on the development of high power switching devices and will present an up to date perspective of switching device technology and materials. The most important material has been and still is silicon (Si) for solid-state semiconductor devices. It dominates the world market at present, particularly in its crystalline form. However, silicon power device operation is generally limited to relatively low frequency and temperature. Silicon Carbide, Gallium Nitride and Diamond offer the potential to overcome the frequency, temperature and power management limitations of silicon. A large number of new concepts and materials are still in the research stage. At present, Silicon Carbide is considered to have the best trade-off between material properties and commercial maturity. Multilayer Silicon Carbide (SiC) power semiconductor devices being in development are promising devices for the near future, but long term reliability, crystal degradation and forward voltage drift problems need to be solved before commercialisation. Key-Words: - Vacuum Switches, Gas filled switches, Power Semiconductor Devices. ISSN: 1790-5117 192 ISBN: 978-960-474-152-6 RECENT ADVANCES in CIRCUITS, SYSTEMS, SIGNAL and TELECOMMUNICATIONS 1 Introduction main disadvantage is the high Power electronics is used to control the switching losses and the slow speed of flow of electric energy.
    [Show full text]
  • Electronics: Retrospective View, Successes and Prospects of Its Development
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE Electrical Engineering. Great Events. Famous Names UDC 621.3: 537.8: 910.4 doi: 10.20998/2074-272X.2018.1.01 M.I. Baranov AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 42: ELECTRONICS: RETROSPECTIVE VIEW, SUCCESSES AND PROSPECTS OF ITS DEVELOPMENT Purpose. Preparation of brief scientific and technical review about sources, retrospective view, basic stages, achievements, problems, trends and prospects of development of world electronics for period of 20th-21st centuries. Methodology. Known scientific methods of collection, analysis and analytical treatment of the opened scientific and technical information of world level in area of a vacuum electronics, semiconductor electronics, vacuum microelectronics and nanoelectronics, and also optical electronics. Results. A brief analytical scientific and technical review is resulted about the primary and present states, achievements, trends and prospects of development of electronics in the developed countries of the world. From positions of approach of the systems advantages and lacks of semiconductor microelectronics are described as compared to a vacuum electronics. Considerable progress is marked in development of semiconductor element base (microtransistors, microprocessors, microcontrollers and other) for creation of different electronic devices and computing engineering. Information, touching the determining deposit of electronic companies of the «Silicon Valley» in the USA in providing of technological breach in area of modern microelectronics, production of computers and their microprocessors, software and creation of devices of mobile communication development, is resulted. The basic problems of space microelectronics are affected. The possible ways of further development are indicated in the world of electronics, including vacuum microelectronics and nanoelectronics, and also optical electronics.
    [Show full text]
  • Category 3—Page 1
    Commerce Control List Supplement No. 1 to Part 774 Category 3—page 1 CATEGORY 3 - ELECTRONICS NS applies to NS Column 1 “Monolithic A. “END ITEMS,” “EQUIPMENT,” Microwave Integrated “ACCESSORIES,” “ATTACHMENTS,” Circuit” (“MMIC”) “PARTS,” “COMPONENTS,” AND amplifiers in 3A001.b.2 “SYSTEMS” and discrete microwave transistors in Note 1: The control status of equipment and 3A001.b.3, except “components” described in 3A001 or 3A002, those 3A001.b.2 and other than those described in 3A001.a.3 to b.3 items being 3A001.a.10, or 3A001.a.12 to 3A001.a.14, which exported or reexported are “specially designed” for or which have the for use in civil same functional characteristics as other telecommunications equipment is determined by the control status of applications the other equipment. NS applies to entire NS Column 2 entry Note 2: The control status of integrated circuits described in 3A001.a.3 to 3A001.a.9, or RS applies “Monolithic RS Column 1 3A001.a.12 to 3A001.a.14 that are unalterably Microwave Integrated programmed or designed for a specific function Circuit” (“MMIC”) for other equipment is determined by the control amplifiers in 3A001.b.2 status of the other equipment. and discrete microwave transistors in N.B.: When the manufacturer or applicant 3A001.b.3, except cannot determine the control status of the other those 3A001.b.2 and equipment, the control status of the integrated b.3 items being circuits is determined in 3A001.a.3 to 3A001.a.9, exported or reexported or 3A001.a.12 to 3A001.a.14.
    [Show full text]
  • Picosecond Streak Camera Fluorometry-A Review
    IEEE JOURNALOF QUANTUM ELECTRONICS, VOL. QE-19, NO. 4, APRIL 1983 585 Picosecond Streak Camera Fluorometry-A Review ANTHONY J. CAMPILLO AND STANLEY L. SHAPIRO (Invited Paper) Abstract-A general tutorial survey is presented describing the use of Several excellent reviews [ 1] - [4] have appeared describing the ultrafast streak cameras in picosecond fluorometry.Current instruments operation and history of the streak camera. This present paper exhibit time resolutions of 1-10 ps with detection sensitivitiesof a few goes beyond the instrumental aspects, and reviews the applica- photoelectrons. When linear photoelectric recording is employed,a real-time direct display of optical transients is provided. Representa- tion of laser fluorescence spectroscopy in some detail. We hope tive examples from the literature inphysics, chemistry, and biology this paper satisfies what appears to be a deficiency in this re- are given, as well as an extensive bibliography. gard in the open literature. We have attempted to present a reasonably self-contained primer in streak camera operation, including examples from the literature in physics, chemistry, INTRODUCTION and biology. We include an extensive bibliography, which is HE ultrafast streak camera is one of the most versatile representative of the field as a whole. Due to the continued Tinstruments used today in picosecondspectroscopy. Its growth of this subject, we are not able to include a complete usefulness arises from its excellent time resolution, its ability list of references here. to determine optical temporal profiles directly and in a single The key principles of electron optical streak camera opera- shot, if need be, and its straightforward integration into re- tion were established during the period from the late 1940’s markablysimple experimental configurations.
    [Show full text]