SUBSTITUTION REQUEST (After the Bidding/Negotiating Phase)

Home , Meriden Mall

Project: Substitution Request Number:

From:

To: Date:

A/E Project Number:

Re: Contract For:

Specification Title: Description:

Section: Page: Article/Paragraph:

Proposed Substitution:

Manufacturer: Phone:

Address:

Trade Name: Model No.:

Installer: Phone:

Address:

History: New product 1-4 years old 5-10 years old More than 10 years old

Differences between proposed substitution and specified product:

Point-by-point comparative data attached — REQUIRED BY A/E

Reason for not providing specified item:

Similar Installation:

Project: Architect:

Address: Owner:

Date Installed:

Proposed substitution affects other parts of Work: No Yes; explain

Savings to Owner for accepting substitution: ($ ).

Proposed substitution changes Contract Time: No Yes [Add] [Deduct] days.

Supporting Data Attached: Drawings Product Data Samples Tests Reports

© Copyright 2007, Construction Specifications Institute, Page of Form Version: June 2004 99 Canal Center Plaza, Suite 300, Alexandria, VA 22314 CSI Form 13.1A SUBSTITUTION REQUEST (After the Bidding/Negotiating Phase — Continued)

The Undersigned certifies: • Proposed substitution has been fully investigated and determined to be equal or superior in all respects to specified product. • Same warranty will be furnished for proposed substitution as for specified product. • Same maintenance service and source of replacement parts, as applicable, is available. • Proposed substitution will have no adverse effect on other trades and will not affect or delay progress schedule. • Cost data as stated above is complete. Claims for additional costs related to accepted substitution which may subsequently become apparent are to be waived. • Proposed substitution does not affect dimensions and functional clearances. • Payment will be made for changes to building design, including A/E design, detailing, and construction costs caused by the substitution. • Coordination, installation, and changes in the Work as necessary for accepted substitution will be complete in all respects.

Submitted by: Signed by: Firm: Address:

Telephone: Attachments:

A/E’s REVIEW AND ACTION

Substitution approved - Make submittals in accordance with Specification Section 01 25 00 Substitution Procedures. Substitution approved as noted - Make submittals in accordance with Specification Section 01 25 00 Substitution Procedures. Substitution rejected - Use specified materials. Substitution Request received too late - Use specified materials.

Signed by: Date:

Additional Comments: Contractor Subcontractor Supplier Manufacturer A/E Other:

© Copyright 2007, Construction Specifications Institute, Page of Form Version: June 2004 99 Canal Center Plaza, Suite 300, Alexandria, VA 22314 CSI Form 13.1A CR-Series Winged Seal Systems Systems Seal Winged Description Physical Properties The Polycrete CR-Series The system consists of two items: an elastomeric Membrane System is membrane and a field-cured header material. designed for parking decks and open-air structures. It The membrane is available in several sizes. It is an features a preformed, elastomeric membrane, which is extruded shape made from an EPDM-based, thermo-rubber fusion-bonded to the concrete deck with Polycrete material (Santoprene). The material’s physical properties Elastomeric Concrete. Once installed, this system provides a are as shown in Table 1. watertight seal while flexing in response to fluctuations in joint width. The Polycrete consists of a combination of a resin mixture and a gradation of sands and aggregate sizes, blended per There are several sizes in the CR-Series group to recommendations of the manufacturer. (See the Polycrete accommodate different joint opening and movement data sheet for further information and technical properties.) capabilities.

The membrane incorporates a center section with a heavy-duty web structure and integral edge flaps with factory TABLE 1 – Physical Properties of the EPDM-Based punched holes. The Polycrete penetrates the holes to secure Thermo-Rubber Seal Element the membrane to the base of the concrete block out. The Property ASTM Test Method Requirement center web configuration is precisely located to exert a Tensile strength, min. D412 1000 psi continuous and uniform horizontal force against the joint Elongation at break, min. D412 410% walls. Hardness, Type A durometer D2240 (modified) 67 +/- 3 Compression set D395 (Method B) The CR-Series shapes are specifically designed for 168h @ 77°F 24% applications where maintaining a smooth walking surface is 168h @ 212°F 36% important. A series of grooves across the top surface of the Tear strength D624 140 lb/in cross-section allows the seals to provide a virtually constant Tension set D412 10% level surface during cyclic action. 100% modulus D412 420 psi Specific gravity D792 0.97 Brittle point D746 < -81oF

TOTAL MIN. MID MAX. MOVE- DIM. A: DIM. B: DIM. C: DIM. D: PRODUCT WIDTH RANGE WIDTH MENT IN IN (MM) IN (MM) IN (MM) IN (MM) IN (MM) IN (MM) IN (MM) (MM) CR-200 0.75" (19) 1.38" (35) 2.00" (51) 1.25" (32) 2.00" (51) 1.75" (44) 3.50" (89) 0.75" (19)

CR-250 0.75" (19) 1.63" (41) 2.50" (64) 1.75" (44) 2.50" (64) 2.25" (57) 3.50" (89) 0.75" (19)

CR-300 1.00" (32) 2.00" (57) 3.00" (83) 2.00" (51) 3.25" (83) 2.75" (70) 3.50" (89) 0.75" (19)

CR-400 1.50" (38) 2.75" (70) 4.00" (102) 2.50" (64) 4.00" (102) 3.00" (76) 3.50" (89) 0.75" (19)

CR-500 1.75" (44) 3.38" (86 5.00" (127) 3.25" (83) 5.00" (127) 3.50" (89) 3.50" (89) 0.75" (19)

CR-600 2.12" (54) 4.06" (103) 6.00" (152) 3.88" (99) 6.00" (152) 4.25" (108) 3.50" (89) 0.75" (19)

EMS, Inc * 13311 Main Road, Akron, NY 14001 * 716-542-3991 * [email protected] * www.eriemetal.com CR-Series INSTALLATION INSTRUCTIONS Wing Seal Systems Seal Systems Wing Material Preparation 1. Size block-out recess to ¾” deep by 3-1/2” wide receiver on each side of the joint opening.

2. Block-out receiver should be flat and level

3. Deviations, spalls and irregularities should be addressed and repairs made in compliance with the manufacturer’s specification.

4. Weather conditions should be dry, no moisture (rain or water in block-out), temperature conditions 45° F to 90° F

Material Installation 1. Sandblast entire block-out recess surface.

2. The use of duct tape and protective paper adjacent to the block-out recess is highly recommended. This serves to protect the deck surface from accidental spillage and the tracking of liquid materials onto the deck surface. Install the CR-membrane into joint opening. Assure that the seal is completely seated in the joint opening.

3. Be sure that the wings of the seal are laying flat on the concrete recess surface. If the wings are bent up, lightly apply heat, causing them to lay flat. The use of a common weed burner and a propane tank should be used to accomplish this task.

1 EMS, Inc * 13311 Main Road, Akron, NY 14001 * 716-542-3991 * [email protected] * www.eriemetal.com Material Installation 4. To mix the Polycrete 2020 bedding mix, pour part “B” into part “A”, mixing thoroughly. You may load the material into a bulk caulk gun. Place a 1” bead of Polycrete 2020 bedding mix to Wing Seal Systems Seal Systems Wing the area under the corner of the wing and the seal body. Then push the wing of the seal into the bedding, allowing material to “ooze” up through the holes in the seal. Spread out the remainder of the Polycrete 2020 to cover the entire recess surface including the vertical wall leg of the recess. Wet to wet. Immediately after the bedding material is placed and you’re assured that the wings of the seal are flat and firmly bedded down. Mix and place the Polycrete 1600 header material over the top of the 2020 bedding while it is still wet.

5. Pour the measured proportions of Polycrete 1600 (Parts A & B) into the 5 or 6 gallon mixing pail. Thor- oughly mix the two components, approximately 1 minute. Begin to add sand (Part C) into the resins while the mixer is turning. It should take a minute to gradually add the sand to the mix. Make sure that all the sand particles are covered; there should be no sand pockets in the mix.

6. Move the pail to the expansion joint and pour the material over the wings of the seal while the Polycrete 2020 is still wet. Take care not to overfill the joint recess. Overfilling of the recess wastes time and causes the excess poured material to be re-handled. This extra motion will take up precious placement time. At the termination ends of each pour, taper or ramp the Polycrete 1600 to receive the next batch.

7. Use the tip end of the trowel to push the header mater into the side of the body of the seal. Work the material by compacting it into the joint recess and along the edge of the seal. Finish troweling the top of the material to suit your desired texture.

2 EMS, Inc * 13311 Main Road, Akron, NY 14001 * 716-542-3991 * [email protected] * www.eriemetal.com Material Installation Wing Seal Systems Seal Systems Wing

8. Repeat the process until the expansion joint is completely filled on both sides. After the expansion joint is completed, carefully remove the protective duct tape and protective paper. Do not leave this material in place during the cure, as it will not be easily removed if allowed to set overnight. Allow the material to develop full cure overnight or until header material is hard to the touch.

The finished effect is a flat smooth joint surface that will allow for the passage of vehicular and pedestrian traffic while providing a waterproof barrier to the area below.

3 EMS, Inc * 13311 Main Road, Akron, NY 14001 * 716-542-3991 * [email protected] * www.eriemetal.com SPECIFICATION Division 079500 CR(NC)-Series Polycrete 1600/2020 [Ambient Cure] System ______

PART 1 - GENERAL

1.01 Summary

A. Section includes: Furnishing of all materials, labor, and equipment necessary for the surface preparation and the installation of the sealed expansion joints in accordance with the details shown on the plans and these specifications. The designs for the deck condition utilize an extruded compression seal type CR(NC)-Series membrane shape fusion bonded to the concrete deck with Polycrete elastomeric concrete system. The design is arranged to flex in response to joint movement and to seal against the intrusion of water.

B. Related Sections: 1. Section 03300 - Cast-in-place concrete 2. Section 07900 - Joint sealant

1.02 References

A. American Society for Testing and Materials (ASTM): 1. ASTM D412 2. ASTM D2240 3. ASTM D395 4. ASTM D624 5. ASTM D792 6. ASTM D746

1.03 Quality Assurance

A. Application qualifications: The manufacturer of the expansion joint will provide a technically qualified representative who will train the installer on the proper techniques for installing the expansion joint. Each installation will be registered and approved by the manufacturer.

B. For the purpose of designating type and quality for work of this section, drawings and specifications are based on products manufactured or furnished by the manufacturer listed in Part 2 of this section. No other products will be considered for use.

C. Execute work of this section by skilled, trained applicators conforming to installation methods and procedures in accordance with the manufacturer’s printed instructions. The applicator must be approved by the manufacturer.

D. Do not proceed with the work until surfaces to receive the expansion joints have been inspected by the engineer and approved by the manufacturer. Correct any deficiencies in the surfaces to receive the expansion joints, as recommended by the manufacturer and engineer. 079500-1 E. Do not proceed with the work when temperatures are below 40°F, expected to fall below 40°F, or above 90°F, unless approved in writing by the manufacturer.

F. Manufacturer will have a minimum of five (5) years’ experience specializing with elastomeric concrete.

1.04 Submittals

A. Submit in accordance with this specification, unless otherwise indicated.

B. Product Data: Manufacturer’s specifications and technical data including the following: 1. Manufacturer’s installation instructions 2. Certified test reports indicating compliance with performance requirements specified herein

C. Shop Drawings: Indicate dimensioning, membrane size, model number, general construction, specific modifications, component connections, anchorage methods, and installation procedures, plus the following specific requirements: 1. Temperature/Adjustment Table, indicating joint width at various temperatures 2. Dimensions based on anticipated movement for the joint location, as supplied by the engineer

D. Quality Control Submittals: 1. Statement of Qualifications 2. Design Data 3. Test Reports 4. Manufacturer’s Field Reports

E. Contract Close-out Submittals: In accordance with these Specifications, submit: 1. Operating and Maintenance Manuals 2. Warranty Documentation

1.05 Delivery, Storage and Handling

A. Packing and Shipping: Deliver products in original, unopened packaging with labels and seals unbroken.

B. Storage and Protection: Store materials in accordance with manufacturer’s recommendations in area protected from weather, moisture, open flame, and sparks. Adhesive must be stored at temperatures between 40° F and 90° F.

1.06 Warranty

079500-2 A. Warranty will state that the material and installation of the joint system complies with requirements of the contract documents and the manufacturer’s printed instructions for installing the expansion joints. B. Warranty will state the responsibility of the installer/manufacturer to stand behind the installed system for the warranty period indicated and for the conditions listed below: 1. Leakage of the parking deck system, including points in transition 2. Abrasion and wear of the materials resulting from normal traffic loading 3. Cracking of the elastomeric concrete material and de-bonding between it and the concrete

PART 2 - PRODUCTS

2.01 Manufacturers A. The winged compression seal type membrane shape will be the following: 1. CR(NC)-Series Membrane profile as supplied by EMS, Inc., 13311 Main Road, Akron, NY 14001 Phone: (716) 542-3991 Fax: (716) 542-3996 Website: www.eriemetal.com B. Elastomeric Concrete header material will be the following: 1. Polycrete 1600 Elastomeric Concrete by EMS, Inc., 13311 Main Road, Akron, NY 14001 Phone: (716) 542-3991 Fax: (716) 542-3996 Website: www.eriemetal.com

C. Elastomeric Concrete bedding material will be the following: 1. Polycrete 2020 Bedding Material by EMS, Inc., 13311 Main Road, Akron, NY 14001 Phone: (716) 542-3991 Fax: (716) 542-3996 Website: www.eriemetal.com

2.02 Components and Materials A. Elastomeric Membrane: The extruded configuration will be an EPDM-based, Thermoplastic Rubber material meeting the specifications prescribed in the manufacturer’s product data sheet and ASTM D2000. The material meets the following physical requirements: PHYSICAL PROPERTIES TEST METHOD TYPICAL VALUES

Hardness, shore A duro. ASTM D-2240 Thermoplastic Rubber Specific gravity ASTM D-792 67A Tensile strength, psi ASTM D-412 1000 psi Ultimate elongation, % ASTM D-412 410% 100% Modulus, psi ASTM D-412 420 psi Compression set, 168 hrs. ASTM D-395 method B 24% @ 77°F 36% @ 212°F Tension set, % ASTM D-412 10% Tear strength, pli ASTM D-624 140 pli @ 77°F 75 pli @ 212°F Brittle point ASTM D-746 <-81°F

079500-3 IMPORTANT! The thermoplastic rubber material can be heat-spliced to form transitions at the end conditions, around columns, etc. Any heat splicing to be done in the field will follow approved methods, as recommended by the manufacturer.

B. Elastomeric Concrete: Polycrete 1600 is a fast-setting, elastomeric, 100% solid, two-component urethane/epoxy system. The resins are mixed with a pre-measured sand and stone combination to form the mortar mix. PHYSICAL PROPERTIES TEST METHOD REQUIREMENT

Tensile strength, min. ASTM D-412 2000 psi Elongation @ break, min. ASTM D-412 50 % Hardness, Type A duro. ASTM D-2240 85A Solids content 100% Tear strength, die C, min. ASTM D-624 225pli Abrasion resistance, .00035 oz. loss per 1,000 cycles Tensile adhesion, ASTM C-501 (CS17 wheel) 400 psi (concrete fails) samples cured 5 days at 90°F 50% RH Mixing ratio 1:1 (part A & B) Pot life 10 - 12 minutes Set time 4 - 8 hours

PART 3 - EXECUTION

3.01 Inspection

A. Prior to installation of the expansion joint profile, the installer will visit the site and notify the proper authority in writing of any conditions, (done under other sections) which might be detrimental to the installation or performance of the expansion joint. Coordinate the installation with related work.

3.02 Preparation of Surfaces of Block-Out Recess in Deck A. Construct the block-out recess and joint opening to the dimensions shown in the manufacturer’s literature. The width of the joint opening should comply with the dimension shown in the temperature/adjustment table on the contract plans. The anticipated movement should be within the movement limits of the CR(NC)-Series membrane size selected for use. B. All surfaces to receive the elastomeric concrete will be dry, clean, and sound concrete, free of loose, delaminated and spalled sections. Repair any sections that do not meet these criteria. The surfaces to receive the CR(NC)-Series System will be sandblasted to exposed aggregate. Sandblasting increases surface area to increase bond capacity of the elastomeric concrete and removes all laitance and other bond-inhibiting contaminants. Tape off the edges of the concrete along the recess to protect the deck surface from spillage.

079500-4 3.03 Installation A. Position the membrane over the open joint and press the bottom portion of the center section down between the concrete interfaces.

B. Mix the Polycrete 2020 bedding material as per manufacturer’s directions. You may load the material into a bulk caulk gun. Place a 1” bead of Polycrete 2020 bedding mix to the area under the corner of the wing and the seal body. Then push the wing of the seal into the bedding, allowing material to “ooze” up through the holes in the seal. Spread out the remainder of the Polycrete 2020 to cover the entire recess surface including the vertical wall of the recess. C. Use a large Jiffy mixer paddle, mix the two Polycrete 1600 resin components together. Assure that there is no sign of streaking and the color is consistent. Add the sand and stone mixture. Blend the ingredients until there are no signs of sand pockets in the mix. D. Immediately place the mortar mix over the top of the wings of the CR(NC)-Series membrane. Completely fill the recess area. Compact the material so that no signs of honeycombing can occur.

E. Level off the Polycrete 1600 and trowel the finish smooth. For best results, keep the surface of the trowel wiped clean.

F. Allow the Polycrete to air cure for 4 - 12 hours. Clean up the work area, removing all containers, any extra materials, debris, etc.

G. Prevent traffic from crossing the joints until the entire assembly is firmly cured.

3.04 Field Quality Control

A. Work, which does not conform to the specified requirements, will be corrected and/or replaced as directed by the manufacturer and engineer.

B. Manufacturer/installer will supply guaranty/warranty to the owner authority, as required.

END OF SECTION

079500-5

Sealant (by others) Heat Welded Splice locations Stainless Steel Wall Retainer & Concrete Anchor

¾”

Column Face or Wall, with wing of seal turned up at Concrete Column termination.

Polycrete Header

3-1/2” Width

Stainless Steel Wall Plates

CR-Series Membrane

Detailed by: Date: AWG 10/9/00

Checked By: Date:

LJB 10/21/00 NO. Description Date By 13311 Main Road • Akron • New York • 14001 Phone: (716) 542-3991 • Fax: (716) 542-3996 • E-mail: [email protected] Scale: EMS Job #: The information contained herein is the proprietary NTS property of ERIE METAL SPECIALTIES, INC. No PROJECT: portion of it may be reproduced by any means or used in Sheet No.: Drawing No.: any form accept for the purpose for which it was intended. 1 of 1 CD-900 All rights of design and invention are hereby reserved. TITLE: Standard Cross Sectional Views & Applications

MSDS 2016

Page 1 of 4

*MATERIAL SAFETY DATA SHEET*

SECTION I – MATERIAL IDENTIFICATION

MATERIAL NAME: Polycrete 1600 - PART A

MANUFACTURER: Erie Metal Specialties, Inc. SUPPLIER: Erie Metal Specialties, Inc. 13311 Main Road 13311 Main Road Akron, NY 14001 Akron, NY 14001

EMERGENCY PHONE: (716) 542-3991 CHEM-TREC: (800) 424-9300

Chemical name: Epoxy Chemical Family: Epoxy Trade Name: Polycrete 1600 - PART A Chemical formula: N/A Material Use: Expansion Joint filler Molecular Weight: N/A

SECTION II – HAZARDOUS INGREDIENTS

Hazardous Ingredients CAS Number Percent (wt) LD50 (rat, oral)

Epoxy Resins 25085-99-8 30-60% 5000 mg/kg Blocked Polyurethane Resin (unknown) 30-60% N/E Glycidyl ether 68609-97-2 5-10% N/E

SECTION III – PHYSICAL DATA • PHYSICAL STATE Liquid • ODOR/APPEARANCE: Clear, slight epoxy odor • ODOR THRESHOLD (ppm): NE • SPECIFIC GRAVITY: 1.08 • VAPOR PRESSURE (mm) N/A • VAPOR DENSITY (air = 1): N/A • EVAPORATION RATE: N/A • BOILING POINT: N/A • SOLUBILITY IN WATER Insoluble • FREEZING POINT: N/A • % VOLATILE (volume): 0% • PH: N/A • COEFFICIENT OF WATER/OIL DISTRIBUTION: N/E

SECTION IV – FIRE AND EXPLOSION HAZARD

• FLAMABILITY: Non-Flammable • UNDER WHICH CONDITIONS: N/A • MEANS OF EXTINCTION: Foam, CO2, Dry Chemical • SPECIAL PROCEDURES: None • FLASH POINT (F°): >200° C • UPPER EXPLOSION LIMIT: N/E • LOWER EXPLOSION LIMIT: N/E • AUTOIGNATION TEMPERATURE: N/A • HAZARD COMBUSTION PRODUCTS: CO2, CO, Smoke • SENSITIVITY TO: N/A • MECHANICAL IMPACT: NONE • STATIC DISCHARGE: NONE

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 2 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART A

SECTION V – REACTIVITY DATA

CHEMICAL STABILITY: Stable If no, under what conditions. N/A INCOMPATIBILITY TO OTHER SUBSTANCES: No If yes, which one’s. None recognized REACTIVITY & UNDER WHAT CONDITIONS: None by itself • Reacts with aliphatic amines, causing irreversible polymerization. HARARDOUS DECOMPOSITION PRODUCTS: CO2, CO, phenolics

SECTION VI – TOXICOLOGICAL PROPERTIES

PRIMARY ROUTE OF EXPOSURE:

X SKIN CONTACT X SKIN ABSOROTION X EYE CONTACT X INHALATION ACUTE X INHALATION CHRONIC X INGESTION

EFFECTS OF ACUTE EXPOSURE: • EYES: May cause slight irritation • SKIN: May cause slight irritation • INHALATION: May cause headache, nausea • INGESTION: May cause nausea, vomiting

EFFECTS OF CHRONIC EXPOSURE: • Prolonged or repeated exposure may cause skin sensitization.

ADDITIONAL HEALTH INFORMATION:

LD50 OF MATERIAL: See - SECTION II LC50 OF MATERIAL: N/E EXPOSURE LIMITS: N/E IRRITANCY OF MATERIAL: Slight, eye & skin irritation SENSITIZATION OF MATERIAL: Possible SYNERGISTIC MATERIAL None known CARCINOGENICITY: NO REPRODUCTIVE EFFECTS: None known TERATOGENICITY: NO MUTAGENICITY: NO

SECTION VII – FIRST AID MEASURES

EYES: Flush with water for 15 minutes. Get to medical attention. SKIN: Wash with soap and water. INHALATION: Remove to fresh air. INGESTION: Get to medical attention

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 3 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART A

SECTION VIII – SPECIAL PROTECTION INFORMATION

PROTECTIVE GLOVES: Impervious EYE PROTECTION: Chemical splash goggles RESPIRATORY PROTECTION: Organic vapor (if no ventilation) OTHER PROTECTIVE EQUIPMENT: Appropriate clothing to prevent skin contact ENGINEERING CONTROLS: General ventilation

SECTION IX – SPILL OR LEAK INFORMATION

ENVIROMENTAL RELEASES: • Use absorbent material to soak up spills. • Collect in suitable containers.

WASTE DISPOSABLE: • Dispose of in accordance with local regulations.

SECTION X – HANDLING & STORAGE INFORMATION

HANDLING PROCEDURES: • Guard against skin & eye exposure.

STORAGE REQUIREMENTS: • No special requirements • Keep from freezing

SECTION XI – REGULATORY INFORMATION

WHMIS CLASSIFICATION: D2B TDGA CLASSIFICATION: Not regulated UN NUMBER: Not regulated TSCA: (USA) All ingredients on TSCA inventory. CPEA: (Canada) All ingredients on DSL (domestic substances list)

SECTION XII – PREPARATION INFORMATION

PREPARED BY: Larry Prouty Telephone number: (905) 564-6100

ABREVIATION NOTES: • N/A = Not applicable N/E = Not established

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 4 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART A

SECTION XIII – U.S. REGULATORY INFORMATION:

This MSDS complies with 20 CRF 1910.1200 (THWE HAZARD COMMUNICATION STANDARD). Although the information and recommendations set forth herein (hereinafter “information”) are presented in good faith and believed to be correct as of the date hereof, Erie Metal Specialties, Inc. makes no representations as to the completeness or accuracy thereof. Information is supplied upon the condition that persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Erie Metal Specialties, Inc. be responsible for damages of any nature whatsoever resulting from the use of, misuse or reliance upon information. No representations or warranties, either expressed or implied, or merchantability, fitness for a particular purpose or any other nature are made hereunder with respect to information or the product to which information refers. Regulatory requirements are subject to change and may differ from one location to another. It is the buyer’s responsibility to ensure its activities comply with Federal, State or Provincial, and local laws and regulations.

ISSUE DATE:……..01/05/09 SUPERCEDES:……….10/09/08

PREPARED BY: Erie Metal Specialties, Inc. 13311 Main Road Akron, NY 14001

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 1 of 4

*MATERIAL SAFETY DATA SHEET*

SECTION I – MATERIAL IDENTIFICATION

MATERIAL NAME: Polycrete 1600 - PART B (FC – fast cure)

MANUFACTURER: Erie Metal Specialties, Inc. SUPPLIER: Erie Metal Specialties, Inc. 13311 Main Road 13311 Main Road Akron, NY 14001 Akron, NY 14001

EMERGENCY PHONE: (716) 542-3991 CHEM-TREC: (800) 424-9300

Chemical name: Amine Chemical Family: Amine Trade Name: Polycrete 1600 - PART B Chemical formula: N/A Material Use: Epoxy curing solution Molecular Weight: N/A

SECTION II – HAZARDOUS INGREDIENTS

Hazardous Ingredients CAS Number Percent (wt) LD50 (rat, oral)

Cyclohexanamine Resin 6864-37-5 60 – 100% 550 mg/kg

SECTION III – PHYSICAL DATA

PHYSICAL STATE Liquid ODOR/APPEARANCE: Clear, slightly yellowish liquid, amine odor ODOR THRESHOLD (ppm): NE SPECIFIC GRAVITY: 0.95 VAPOR PRESSURE (mm) N/A VAPOR DENSITY (air = 1): N/A EVAPORATION RATE: N/A BOILING POINT: 200° C SOLUBILITY IN WATER Insoluble FREEZING POINT: < 10° C % VOLATILE (volume): 0% PH: N/A COEFFICIENT OF WATER/OIL DISTRIBUTION: N/E

SECTION IV – FIRE AND EXPLOSION HAZARD

FLAMABILITY: Non-Flammable UNDER WHICH CONDITIONS: N/A MEANS OF EXTINCTION: Foam, CO2, Dry Chemical SPECIAL PROCEDURES: N/A FLASH POINT (F°): 175° C UPPER EXPLOSION LIMIT: N/E LOWER EXPLOSION LIMIT: N/E AUTOIGNATION TEMPERATURE: N/A HAZARD COMBUSTION PRODUCTS: CO2, CO, Smoke SENSITIVITY TO: NO MECHANICAL IMPACT: NONE STATIC DISCHARGE: NONE

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 2 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART B (FC – fast cure)

SECTION V – REACTIVITY DATA

CHEMICAL STABILITY: Stable If no, under what conditions. N/A INCOMPATIBILITY TO OTHER SUBSTANCES: YES If yes, which one’s. Acids REACTIVITY & UNDER WHAT CONDITIONS: None by itself • Reacts with acids, epoxy compounds HARARDOUS DECOMPOSITION PRODUCTS: CO2, CO, nitrous oxides

SECTION VI – TOXICOLOGICAL PROPERTIES

PRIMARY ROUTE OF EXPOSURE:

X SKIN CONTACT X SKIN ABSOROTION X EYE CONTACT X INHALATION ACUTE X INHALATION CHRONIC X INGESTION

EFFECTS OF ACUTE EXPOSURE: • EYES: Severe eye irritation • SKIN: Corrosive to skin • INHALATION: May cause burns to respiratory tract • INGESTION: May cause burns to mouth & throat

EFFECTS OF CHRONIC EXPOSURE: • May cause skin and/or respiratory sensitization.

ADDITIONAL HEALTH INFORMATION:

LD50 OF MATERIAL: See - SECTION II LC50 OF MATERIAL: N/E EXPOSURE LIMITS: N/E IRRITANCY OF MATERIAL: Severe, eye & skin irritation SENSITIZATION OF MATERIAL: Skin & respiratory sensitization SYNERGISTIC MATERIAL None known CARCINOGENICITY: NO REPRODUCTIVE EFFECTS: None known TERATOGENICITY: NO MUTAGENICITY: NO

SECTION VII – FIRST AID MEASURES

EYES: Immediately flush with water for 30 minutes. Get to medical attention. SKIN: Immediately flush with water for 15 minutes. Get medical attention. INHALATION: Remove to fresh air. If irritation persists, get to medical attention. INGESTION: Do not induce vomiting. Give large amounts of water if patient is conscious. Get to medical attention ADDITIONAL INFORMATION: Remove and wash contaminated clothing before reuse. Destroy contaminated shoes.

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 3 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART B (FC – fast cure)

SECTION VIII – SPECIAL PROTECTION INFORMATION

PROTECTIVE GLOVES: Impervious EYE PROTECTION: Chemical splash goggles RESPIRATORY PROTECTION: Organic vapor, or full face respirator OTHER PROTECTIVE EQUIPMENT: Appropriate clothing to prevent skin contact ENGINEERING CONTROLS: General ventilation

SECTION IX – SPILL OR LEAK INFORMATION

ENVIROMENTAL RELEASES: • Use absorbent material to soak up spills. • Collect in suitable containers.

WASTE DISPOSABLE: • Dispose of in accordance with local regulations.

SECTION X – HANDLING & STORAGE INFORMATION

HANDLING PROCEDURES: • Guard against skin & eye exposure.

STORAGE REQUIREMENTS: • Keep in a cool dry place & well ventilated location • Keep containers tightly sealed • Do not allow to freeze

SECTION XI – REGULATORY INFORMATION

WHMIS CLASSIFICATION: D2B, E TDGA CLASSIFICATION: Class 8, packing group III UN NAME: Dimethylmethylenedicyclohexanamine UN NUMBER: UN 2735 TSCA: (USA) All ingredients on TSCA inventory. CPEA: (Canada) All ingredients on DSL (domestic substances list)

SECTION XII – PREPARATION INFORMATION

PREPARED BY: Larry Prouty Telephone number: (905) 564-6100

ABREVIATION NOTES: • N/A = Not applicable • N/E = Not established • FC = Fast Cure

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 4 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART B (FC – fast cure)

SECTION XIII – U.S. REGULATORY INFORMATION:

ISSUE DATE:……..01/05/09 SUPERCEDES:……….10/09/08

PREPARED BY: Erie Metal Specialties, Inc. 13311 Main Road Akron, NY 14001

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 1 of 4

*MATERIAL SAFETY DATA SHEET*

SECTION I – MATERIAL IDENTIFICATION

MATERIAL NAME: Polycrete 1600 - PART C (Sand)

MANUFACTURER: Erie Metal Specialties, Inc. SUPPLIER: Erie Metal Specialties, Inc. 13311 Main Road 13311 Main Road Akron, NY 14001 Akron, NY 14001

EMERGENCY PHONE: (716) 542-3991 CHEM-TREC: (800) 424-9300

Chemical name: Silica Chemical Family: Silica Trade Name: Polycrete 1600 Chemical formula: Si O2 Material Use: Expansion Joint filler Molecular Weight: N/A

SECTION II – HAZARDOUS INGREDIENTS

Hazardous Ingredients CAS Number Percent (wt) LD50 (rat, oral)

Crystalline silica 14808-60-7 60-100% NE

SECTION III – PHYSICAL DATA

PHYSICAL STATE Solid ODOR/APPEARANCE: Odorless, dry aggregate mix ODOR THRESHOLD (ppm): NE SPECIFIC GRAVITY: 2.7 VAPOR PRESSURE (mm) N/A VAPOR DENSITY (air = 1): N/A EVAPORATION RATE: N/A BOILING POINT: N/A SOLUBILITY IN WATER Insoluble FREEZING POINT: N/A % VOLATILE (volume): 0% PH: N/A COEFFICIENT OF WATER/OIL DISTRIBUTION: NE

SECTION IV – FIRE AND EXPLOSION HAZARD

FLAMABILITY: Non-Flammable UNDER WHICH CONDITIONS: N/A MEANS OF EXTINCTION: N/A SPECIAL PROCEDURES: N/A FLASH POINT (F°): NONE UPPER EXPLOSION LIMIT: N/A LOWER EXPLOSION LIMIT: N/A AUTOIGNATION TEMPERATURE: N/A HAZARD COMBUSTION PRODUCTS: N/A SENSITIVITY TO: NO MECHANICAL IMPACT: NONE STATIC DISCHARGE: NONE

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 2 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART C

SECTION V – REACTIVITY DATA

CHEMICAL STABILITY: Stable If no, under what conditions. N/A INCOMPATIBILITY TO OTHER SUBSTANCES: No If yes, which one’s. None recognized REACTIVITY & UNDER WHAT CONDITIONS: Reacts with hydrofluoric acid to generate the volatile corrosive gas SiF4 HARARDOUS DECOMPOSITION PRODUCTS: None

SECTION VI – TOXICOLOGICAL PROPERTIES

PRIMARY ROUTE OF EXPOSURE:

X SKIN CONTACT X SKIN ABSOROTION X EYE CONTACT X INHALATION ACUTE X INHALATION CHRONIC X INGESTION

EFFECTS OF ACUTE EXPOSURE: • EYES/SKIN: May cause slight irritation • INHALATION: May cause slight irritation

EFFECTS OF CHRONIC EXPOSURE: • Prolonged or repeated exposure may cause scarring of the lungs with cough and shortness of breath. A delayed injury, silicosis, may result from breathing free silica. Crystalline silica has been classified by international agency for research on cancer (IARC) as 2A – probable carcinogenic to humans.

ADDITIONAL HEALTH INFORMATION:

LD50 OF MATERIAL: See - SECTION II LC50 OF MATERIAL: N/E EXPOSURE LIMITS: 0.1 mg/m3 (for crystalline silica) IRRITANCY OF MATERIAL: NO SENSITIZATION OF MATERIAL: NO SYNERGISTIC MATERIAL None known CARCINOGENICITY: YES, SEE ABOVE REPRODUCTIVE EFFECTS: None known TERATOGENICITY: NO MUTAGENICITY: NO

SECTION VII – FIRST AID MEASURES

EYES: Flush with water. Get to medical attention if irritation persists. SKIN: Wash with soap and water. INHALATION: Remove to fresh air. INGESTION: Get to medical attention

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 3 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART C

SECTION VIII – SPECIAL PROTECTION INFORMATION

PROTECTIVE GLOVES: Adequate to protect from abrasive products. EYE PROTECTION: Safety glasses RESPIRATORY PROTECTION: Dust mask (or approved respirator if TLV exceeds 0.1 mg/m3. OTHER PROTECTIVE EQUIPMENT: Appropriate clothing. ENGINEERING CONTROLS: General ventilation to keep dust levels below the recommended TLV of mg/m3.

SECTION IX – SPILL OR LEAK INFORMATION

ENVIROMENTAL RELEASES: • Sweep up spills. • Collect in suitable containers.

WASTE DISPOSABLE: • Dispose of in accordance with local regulations.

SECTION X – HANDLING & STORAGE INFORMATION

HANDLING PROCEDURES: • Guard against inhalation of dust.

STORAGE REQUIREMENTS: • None

SECTION XI – REGULATORY INFORMATION

WHMIS CLASSIFICATION: D2A TDGA CLASSIFICATION: Not regulated UN NUMBER: Not regulated TSCA: (USA) All ingredients on TSCA inventory. CPEA: (Canada) All ingredients on DSL (domestic substances list)

SECTION XII – PREPARATION INFORMATION

PREPARED BY: Larry Prouty Telephone number: (905) 564-6100

ABREVIATION NOTES: • N/A = Not applicable • N/E = Not established

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 4 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 1600 - PART C

SECTION XIII – U.S. REGULATORY INFORMATION:

ISSUE DATE:……..01/05/09 SUPERCEDES:……….10/09/08

PREPARED BY: Erie Metal Specialties, Inc. 13311 Main Road Akron, NY 14001

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 1 of 4 *MATERIAL SAFETY DATA SHEET*

SECTION I – MATERIAL IDENTIFICATION

MATERIAL NAME: Polycrete 2020 Bedding - PART A (white)

MANUFACTURER: Erie Metal Specialties, Inc. SUPPLIER: Erie Metal Specialties, Inc. 13311 Main Road 13311 Main Road Akron, NY 14001 Akron, NY 14001

EMERGENCY PHONE: (716) 542-3991 CHEM-TREC: (800) 424-9300

Chemical name: N/A Chemical Family: Mixture Trade Name: Polycrete 2020 Bedding - PART A Chemical formula: N/A Material Use: Adhesive Molecular Weight: N/A

SECTION II – HAZARDOUS INGREDIENTS

Hazardous Ingredients CAS Number Percent (wt) LD50 (rat, oral)

Epoxy Resins 25068-38-6 30-60% 11,400 mg/kg Butyl glycidyl ether 2426-08-6 1-5% 2,050 mg/kg

SECTION III – PHYSICAL DATA

• PHYSICAL STATE Thick paste • ODOR/APPEARANCE: White, slight epoxy odor • ODOR THRESHOLD (ppm): NE • SPECIFIC GRAVITY: 1.5 • VAPOR PRESSURE (mm) N/A • VAPOR DENSITY (air = 1): N/A • EVAPORATION RATE: N/A • BOILING POINT: N/E • SOLUBILITY IN WATER Insoluble • FREEZING POINT: N/A • % VOLATILE (volume): 0% • PH: N/A • COEFFICIENT OF WATER/OIL DISTRIBUTION: N/E

SECTION IV – FIRE AND EXPLOSION HAZARD

• FLAMABILITY: Non-Flammable • UNDER WHICH CONDITIONS: N/A • MEANS OF EXTINCTION: Foam, CO2, Dry Chemical • SPECIAL PROCEDURES: None • FLASH POINT (F°): >249° C • UPPER EXPLOSION LIMIT: N/E • LOWER EXPLOSION LIMIT: N/E • AUTOIGNATION TEMPERATURE: N/A • HAZARD COMBUSTION PRODUCTS: CO2, CO, Smoke • SENSITIVITY TO: N/A • MECHANICAL IMPACT: NONE • STATIC DISCHARGE: NONE

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 2 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 - PART A

SECTION V – REACTIVITY DATA

CHEMICAL STABILITY: Stable If no, under what conditions. N/A INCOMPATIBILITY TO OTHER SUBSTANCES: NO If yes, which one’s. No one recognized REACTIVITY & UNDER WHAT CONDITIONS: None by itself • Reacts with aliphatic amines, causing irreversible polymerization. HARARDOUS DECOMPOSITION PRODUCTS: CO2, CO, phenolics

SECTION VI – TOXICOLOGICAL PROPERTIES

PRIMARY ROUTE OF EXPOSURE:

X SKIN CONTACT X SKIN ABSOROTION X EYE CONTACT X INHALATION ACUTE X INHALATION CHRONIC X INGESTION

EFFECTS OF ACUTE EXPOSURE: • EYES: May cause slight eye irritation • SKIN: May cause slight irritation to skin • INHALATION: May cause headache, nausea • INGESTION: May cause nausea & vomiting

EFFECTS OF CHRONIC EXPOSURE: • Prolonged or repeated exposure may cause skin sensitization.

ADDITIONAL HEALTH INFORMATION:

SECTION VII – FIRST AID MEASURES

EYES: Flush with water for 15 minutes. Get to medical attention. SKIN: Wash with soap and water. INHALATION: Remove to fresh air. INGESTION: Get to medical attention

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 3 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 - PART A

SECTION VIII – SPECIAL PROTECTION INFORMATION

PROTECTIVE GLOVES: Impervious EYE PROTECTION: Chemical splash goggles RESPIRATORY PROTECTION: Organic vapor (id no ventilation) OTHER PROTECTIVE EQUIPMENT: Appropriate clothing to prevent skin contact ENGINEERING CONTROLS: General ventilation

SECTION IX – SPILL OR LEAK INFORMATION

ENVIROMENTAL RELEASES: • Use absorbent material to soak up spills. • Collect in suitable containers.

WASTE DISPOSABLE: • Dispose of in accordance with local regulations.

SECTION X – HANDLING & STORAGE INFORMATION

HANDLING PROCEDURES: • Guard against skin & eye exposure.

STORAGE REQUIREMENTS: • Do not allow to freeze

SECTION XI – REGULATORY INFORMATION

WHMIS CLASSIFICATION: D2B TDGA CLASSIFICATION: Not regulated UN NAME: Not regulated UN NUMBER: Not regulated TSCA: (USA) All ingredients on TSCA inventory. CPEA: (Canada) All ingredients on DSL (domestic substances list)

SECTION XII – PREPARATION INFORMATION

PREPARED BY: Larry Prouty Telephone number: (905) 564-6100

ABREVIATION NOTES: • N/A = Not applicable • N/E = Not established

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 4 of 4 *MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 - PART A

SECTION XIII – U.S. REGULATORY INFORMATION:

ISSUE DATE:……..01/05/09 SUPERCEDES:……….10/09/08

PREPARED BY: Erie Metal Specialties, Inc. 13311 Main Road Akron, NY 14001

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 1 of 4

*MATERIAL SAFETY DATA SHEET*

SECTION I – MATERIAL IDENTIFICATION

MATERIAL NAME: Polycrete 2020 Bedding - PART B (black)

MANUFACTURER: Erie Metal Specialties, Inc. SUPPLIER: Erie Metal Specialties, Inc. 13311 Main Road 13311 Main Road Akron, NY 14001 Akron, NY 14001

EMERGENCY PHONE: (716) 542-3991 CHEM-TREC: (800) 424-9300

Chemical name: N/A Chemical Family: Mixture Trade Name: Polycrete 2020 Bedding - PART B Chemical formula: N/A Material Use: Epoxy curing pastes Molecular Weight: N/A

SECTION II – HAZARDOUS INGREDIENTS

Hazardous Ingredients CAS Number Percent (wt) LD50 (rat, oral)

Polyamide Resin 68082-29-1 10-30% N/E Triethylene Tetramine 112-24-3 10-30% 2,500 mg/kg

SECTION III – PHYSICAL DATA

PHYSICAL STATE Thick paste ODOR/APPEARANCE: Black, amine odor ODOR THRESHOLD (ppm): NE SPECIFIC GRAVITY: 1.5 VAPOR PRESSURE (mm) N/A VAPOR DENSITY (air = 1): N/A EVAPORATION RATE: N/A BOILING POINT: N/E SOLUBILITY IN WATER Slightly miscible FREEZING POINT: N/A % VOLATILE (volume): 0% PH: N/A COEFFICIENT OF WATER/OIL DISTRIBUTION: N/E

SECTION IV – FIRE AND EXPLOSION HAZARD

FLAMABILITY: Non-Flammable UNDER WHICH CONDITIONS: N/A MEANS OF EXTINCTION: Foam, CO2, Dry Chemical SPECIAL PROCEDURES: None FLASH POINT (F°): 118° C UPPER EXPLOSION LIMIT: N/E LOWER EXPLOSION LIMIT: N/E AUTOIGNATION TEMPERATURE: N/E HAZARD COMBUSTION PRODUCTS: CO2, CO, Smoke SENSITIVITY TO: N/A MECHANICAL IMPACT: NONE STATIC DISCHARGE: NONE

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 2 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 Bedding - PART B (black)

SECTION V – REACTIVITY DATA

CHEMICAL STABILITY: Stable If no, under what conditions. N/A INCOMPATIBILITY TO OTHER SUBSTANCES: YES If yes, which one’s. Oxidizing agents, aldehydes, ketones, acrylates REACTIVITY & UNDER WHAT CONDITIONS: None by itself • Reacts with oxidizing agents, bases, epoxy compounds. HARARDOUS DECOMPOSITION PRODUCTS: CO2, CO, nitrous oxides

SECTION VI – TOXICOLOGICAL PROPERTIES

PRIMARY ROUTE OF EXPOSURE:

X SKIN CONTACT X SKIN ABSOROTION X EYE CONTACT X INHALATION ACUTE X INHALATION CHRONIC X INGESTION

EFFECTS OF ACUTE EXPOSURE: • EYES: Severe eye irritation • SKIN: Corrosive to skin • INHALATION: Severe irritation • INGESTION: May cause burns to mouth & throat

EFFECTS OF CHRONIC EXPOSURE: • May cause skin and/or respiratory sensitization.

ADDITIONAL HEALTH INFORMATION:

LD50 OF MATERIAL: See - SECTION II (not established for this product) LC50 OF MATERIAL: N/E EXPOSURE LIMITS: N/E IRRITANCY OF MATERIAL: Severe, eye & skin irritation SENSITIZATION OF MATERIAL: Skin & respiratory sensitization SYNERGISTIC MATERIAL None known CARCINOGENICITY: NO REPRODUCTIVE EFFECTS: None known TERATOGENICITY: NO MUTAGENICITY: NO

SECTION VII – FIRST AID MEASURES

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 3 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 Bedding - PART B (black)

SECTION VIII – SPECIAL PROTECTION INFORMATION

SECTION IX – SPILL OR LEAK INFORMATION

ENVIROMENTAL RELEASES: • Use absorbent material to soak up spills. • Collect in suitable containers.

WASTE DISPOSABLE: • Dispose of in accordance with local regulations.

SECTION X – HANDLING & STORAGE INFORMATION

HANDLING PROCEDURES: • Guard against skin & eye exposure. Ground all transfer equipment. • Tubing of copper and copper alloys are quickly corroded by this product.

STORAGE REQUIREMENTS: • Do not allow to freeze

SECTION XI – REGULATORY INFORMATION

WHMIS CLASSIFICATION: D1B, D2B, E TDGA CLASSIFICATION: Class 8, packing group III UN NAME: N/A UN NUMBER: UN 1760 TSCA: (USA) All ingredients on TSCA inventory. CPEA: (Canada) All ingredients on DSL (domestic substances list)

SECTION XII – PREPARATION INFORMATION

PREPARED BY: Larry Prouty Telephone number: (905) 564-6100

ABREVIATION NOTES: • N/A = Not applicable • N/E = Not established

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996 MSDS 2016

Page 4 of 4

*MATERIAL SAFETY DATA SHEET*

MATERIAL NAME: Polycrete 2020 - PART B

SECTION XIII – U.S. REGULATORY INFORMATION:

ISSUE DATE:……..01/05/09 SUPERCEDES:……….10/09/08

PREPARED BY: Erie Metal Specialties, Inc. 13311 Main Road Akron, NY 14001

13311 Main Road ▪ Akron, New York 14001 ▪ Phone 716-542-3991 ▪ Fax 716-542-3996

Erie Metal Specialties 13311 Main Road Akron, NY 14001 Phone: 716-542-3991 Fax: 716-542-3996 www.eriemetal.com

PROJECT REFERENCES

CR-Series Project References March 2016

Table of Contents Introduction i.

Project Name City State Year Page No. St. Vincent Hospital Parking Garage Birmingham AL 2006 1 Quinnipiac University Parking Garage Hamden CT 2009 1 Bradley International Airport Garage Repair Hartford CT 2005 2 Middletown Garage Repairs Middletown CT 2015 2 Yale New Haven Hospital New Haven CT 2015 3 Tully Health Center Parking Garage Stamford CT 2010 3 Westfield Meriden Mall Westfield CT 2009 4 The Shops at National Place Washington DC 2015 4 Fannie Mae Pedestrian Bridge Washington DC 2012 5 North Side Alpharetta Parking Deck Alpharetta GA 2010 5 North Creek Parking Deck Atlanta GA 2012 6 Platinum Towers Parking Garage Atlanta GA 2012 6 CNN Parking Garage Atlanta GA 2012 7 Coca Cola Headquarters Atlanta GA 2010 7 Northside Alpharetta Parking Deck Atlanta GA 2013 8 Phipps Tower Plaza Atlanta GA 2009 8 Atlanta Airport Parking Garage Repairs Atlanta GA 2009 9 Museum Tower Condominiums Parking Deck Atlanta GA 2012 9 Physicians’ Clinic of Iowa Cedar Rapids IA 2015 10 St. Luke’s Hospital Cedar Rapids IA 2014 10 Veterans Memorial Stadium Cedar Rapids IA 2011 11 Harrah’s Casino Garage Council Bluffs IA 2015 11 Mercy Hospital Garage Council Bluffs IA 2014 12 Mercy Hospital in Council Bluffs Council Bluffs IA 2013 12 Finley Hospital Parking Garage Dubuque IA 2010 13 University of Iowa Iowa City IA 2014 13 KU Medical Center Parking Garage Kansas City KS 2010 14 St. Elizabeth Hospital Parking Garage Edgewood KY 2011 14 Lakeside Shopping Center Parking Garage Metairie LA 2010 15 Mount Washington Center Baltimore MD 2014 15

Project Name City State Year Page No. Calvert Street Parking Garage Baltimore MD 2006 16 7501 Wisconsin Ave. Bethesda MD 2014 16 12505 Park Potomac Ave. Potomac MD 2014 17 Pickering Square Parking Garage Bangor ME 2009 17 U & M Parking Structure Ann Arbor MI 2013 18 University of MI – NC 100 Ann Arbor MI 2013 18 University of Michigan Parking Garage A (M18) Ann Arbor MI 2012 19 University of Michigan M18 Garage Ann Arbor MI 2011 19 Wayne Street University Parking Garage No. 3 Detroit MI 2012 20 McClaren Hospital Parking Garage Flint MI 2012 20 Mill Street Parking Structure Flint MI 2013 21 North Capitol Parking Garage Repairs Lansing MI 2012 21 Capitol View Office Complex Parking Garage Lansing MI 2011 22 North Capitol Parking Garage Repairs Lansing MI 2011 22 Foley Parking Ramp Anoka MN 2015 23 Wells Fargo Plaza Parking Garage Bloomington MN 2011 23 Northland Center Parking Ramp Duluth MN 2015 24 St. Luke’s Hospital Parking Garage Duluth MN 2011 24 St. Luke’s Hospital Parking Garage Duluth MN 2012 25 50th & France Parking Ramp Edina MN 2014 25 Minnesota Convention Center Minneapolis MN 2013 26 Hennepin Medical Center Minneapolis MN 2015 26 Minneapolis Community & Technical College Minneapolis MN 2015 27 University of Minnesota Parking Garage Minneapolis MN 2011 27 Hennepin Medical Center Minneapolis MN 2015 28 Jerry Haaf Memorial Parking Ramp Minneapolis MN 2015 28 Mayo Ramp – Mayo Clinic Minneapolis MN 2015 29 11th & Marquette Parking Facility Minneapolis MN 2014 29 Lowes of Central Charlotte Charlotte NC 2014 30 CHS NE Visitor PD Repairs Concord NC 2015 30 Bismarck Parking Ramp Bismarck ND 2014 31 University of Nebraska Parking Garage Lincoln NE 2007 31

Project Name City State Year Page No. West Haymarket Parking Garage Lincoln NE 2013 32 Physicians Mutual Insurance Company PG Omaha NE 2011 32 Omaha Tower Blue Cross/Blue Shield Garage Omaha NE 2014 33 Bergan Mercy Medical Center Parking Garage Omaha NE 2011 33 Douglas Street Parking Garage Omaha NE 2011 34 Double Tree Parking Garage Omaha NE 2010 34 Mutual of Omaha Parking Ramp B Omaha NE 2011 35 Midtown Crossing Parking Garage Omaha NE 2009 35 Bergan Mercy Medical Center Parking Garage Omaha NE 2015 36 Durham Museum Omaha NE 2015 36 Creighton University Omaha NE 2012 37 Nebraska Medical Center Parking Garage Omaha NE 2012 37 Omaha World Herald Parking Garage Omaha NE 2012 38 University of NE Medical Center Lot 50 Garage Omaha NE 2011 38 Nebraska Medical Center South Tower Garage Omaha NE 2012 39 Whitehall Condominiums Omaha NE 2013 39 High Hanover Garage Portsmouth NH 2009 40 New Jersey Transit Bus Garage Maplewood NJ 2011 40 Walden Galleria Parking Garage Repairs Buffalo NY 2011 41 NY Presbyterian Hospital Parking Garage New York NY 2015 41 Rochester Airport Parking Garage Rochester NY 2011 42 Stony Brook Hospital Parking Garage Stony Brook NY 2013 42 Akron Children’s Hospital Parking Garage Akron OH 2008 43 Columbus Airport Parking Garage Columbus OH 2015 43 Winstar World Casino Parking Garage Thackerville OK 2011 44 Lehigh Valley Hospital Parking Garage Allentown PA 2012 44 Shaw Building Monroeville PA 2015 45 Carnegie Mellon University Parking Garage Pittsburgh PA 2005 45 Texas A&M University Parking Garage Repairs College Station TX 2012 46 Lincoln-Knox Dallas TX 2015 46 Plaza at Preston Center Dallas TX 2015 47 Dallas/Fort Worth Int’l Airport Terminal D DFW Airport TX 2014 47

Project Name City State Year Page No. Preston Ridge Parking Garage Frisco TX 2012 48 Energy Crossing Houston TX 2008 48 Houston Hobby Airport Houston TX 2015 49 Shell Parking Garage Houston TX 2015 49 BP Parking Garage Houston TX 2007 50 5601 MacArthur Irving TX 2014 50 Fair Plaza Parking Garage Tyler TX 2014 51 East Texas Medical Center Parking Garage Tyler TX 2010 51 Metro Park Garage Alexandria VA 2011 52 Ballston Parking Garage Arlington VA 2013 52 Westlee Condominum Arlington VA 2006 53 Springfield Mall Parking Deck Fairfax VA 2011 53 University of Mary Washington Parking Garage Fredericksburg VA 2006 54 1750 Tysons Blvd. Garage McLean VA 2014 54 Reston Executive Center Parking Garage Reston VA 2013 55 Metro Park Garage Springfield VA 2006 55 Old Gallows Road Project Vienna VA 2013 56 8521 Leesburg Pike Garage Vienna VA 2013 56 LaCrosse Parking Ramp LaCrosse WI 2013 57 General Mitchell Int’l Airport Parking Garage Milwaukee WI 2011 57 City of Oshkosh Parking Deck Oshkosh WI 2015 58 Charleston Medical Center Parking Garage Charleston WV 2006 58

INTRODUCTION

Erie Metal Specialties, Inc. (EMS) has been providing high-quality expansion joint systems to the commercial construction industry since 1986. The expansion joints are typically used for open-air structures such as parking garages, stadiums, plaza decks, airports, shopping plazas, malls, commercial buildings and hospitals.

The purpose of this document is to provide a brief overview of a sampling of projects that we have provided products and services for within the past five years. As you will see on the following pages, our CR-Series winged expansion joint system has been used for an assortment of applications in a variety of structures. Although this is merely a fraction of the total number of projects throughout our history, it demonstrates our wide range of experience and expertise.

Additional information about each of these projects can be found on our website (www.eriemetal.com). If you have any questions about these projects or would like to discuss how our products can be used for your application, please contact us at 716-542-3991.

Project: St. Vincent Hospital Parking Garage Birmingham, AL Year: 2006

Description Summit Waterproofing was contracted to install the expansion joints at the St. Vincent Hospital parking garage in Birmingham, Alabama. The CR-Series winged system was used because of its ability to provide a smooth transition for pedestrian traffic while sustaining the loads from vehicles.

Product(s): CR

Contractor: Summit Waterproofing, Inc. Contact: Dan Stegall Address: 1947 McCain Parkway Pelham, AL 35124 Phone: 205-664-3106 Website: www.summit-waterproofing.com

A/E Firm: Schoel Consulting Engineers Address: 1001 22nd Street South Birmingham, AL 32505 Phone: 205-323-6166 Website: www.schoel.com

Project: Quinnipiac University Parking Garage Hamden, CT Year: 2009

Description The CR-Series expansion joint system was used for repair of the parking garage at this university in Hamden, Connecticut. EMS products were specified by DiCesare-Bentley Engineers, Inc The repairs were completed by Desco Products of West Haven, Connecticut.

Product(s): CR

Contractor: Desco Products of Connecticut Contact: Fred DiGioia Address: 48 Thill Street West Haven, CT 06516 Phone: 203-932-2271

A/E Firm: DiCesare-Bentley Engineers, Inc. Address: 100 Fort Road Groton, CT 06340 Phone: 860-448-0400 Website: www.dbengineers.com

Project: Bradley International Airport Garage Repair Hartford, CT Year: 2005

Description Kelly Enterprises worked with EMS for repairs at the Bradley International Airport parking garage in Hartford, Connecticut. The existing expansion joints were removed and replaced with the CR-series winged expansion joint.

Product(s): CR

Contractor: Kelly Enterprises Contact: Jerry Blank Address: 50 United Drive North Haven, CT 06473 Phone: 203-239-4549 Website: www.kellyenterprisesinc.com

Project: Middletown Garage Repairs Middletown, CT Year: 2015

Description The CR-Series wing seal expansion joint system was installed by G.L. Capasso during the duration of the Middletown Garage Repairs in Middletown, CT. This project was overseen by architectural and engineering firm Desman Associates.

Product(s): CR

Contractor: G L Capasso Contact: Jorge Orfao Address: 34 Lloyd Street New Haven, CT 06513 Phone: 203-469-2810 Website: www.glcapasso.com

A/E Firm: Desman Associates Address: 55 Capital Blvd., 4th Floor Rocky Hill, CT 06067 Phone: 860-563-1117 Website: www.desman.com

Project: Yale New Haven Hospital New Haven, CT Year: 2015

Description The CR-Series wing expansion joint system was installed in the parking garage at the Yale New Haven Hospital in New Haven, CT in 2015. The CR-Series is often chosen for parking garage applications as it works well to provide a smooth walking surface, as well as providing strong and stable support for vehicular traffic.

Product(s): CR

Contractor: Structural Preservations Contact: Jerry Blank Address: 1755 Highland Ave. Cheshire, CT 06410 Phone: 203-203-5179 Website: www.structural.net

Project: Tully Health Center Parking Garage Stamford, CT Year: 2010

Description The Tully Health Center Parking Garage Repair project required a multi-chamber wing seal for repairs to the existing expansion joints. Hollfelder Waterproofing installed the CR-Series expansion joint system for this project.

Product(s): CR

Contractor: Hollfelder Waterproofing, LLC Contact: Bill Donat Address: 99 Garnet Park Rd. Madison, CT 06443 Phone: 203-318-0691

Project: Westfield Meriden Mall Westfield, CT Year: 2009

Description Frank Capasso and Sons installed the CR-Series wing expansion joint system in the parking garage at the Meriden Mall in Westfield, Connecticut. The CR-Series system is often used in parking garages because it provides smooth transitions for pedestrians while working well for vehicular traffic.

Product(s): CR

Contractor: Frank Capasso & Sons Contact: Anthony Capasso Address: 1003 Middletown Ave. Northford, CT 06472 Phone: 203-234-2355 Website: www.frankcapassoandsons.com

Project: National Place Washington, DC Year: 2015

Description Restoration East performed expansion joint repairs at The Shops at National Place in Washington, DC, using both the CSS(H) and the CR-systems to provide both pedestrian and vehicular support, as well as using the CSS(H) to provide a color-matched façade at this popular shopping destination.

Product(s): CSS(H), CR

Contractor: Restoration East Contact: Matt Armold Address: 4209 East Chase St. Baltimore, MD 21205 Phone: 410-563-4972 Website: www.restorationeast.com

Project: Fannie Mae Pedestrian Bridge Washington, DC Year: 2012

Description Restoration East used the CR-Series wing seal for restoration work completed on the Pedestrian Bridge for the Fannie Mae offices located in Washington, DC. Restoration East is a certified applicator for EMS prodcuts.

Product(s): CR

Contractor: Restoration East Contact: John Bert Address: 4209 E. Chase Street Baltimore, MD 21205 Phone: 410-563-4972 Website: www.restorationeast.com

Project: North Side Alpharetta Parking Deck Alpharetta, GA Year: 2010

Description The CR-Series winged expansion joint was selected for repairs at the North Side Alpharetta Parking Garage in Alpharetta, Georgia. The seal was installed by Southern Preservation Systems, a certified contractor for EMS products.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: North Creek Parking Deck Atlanta, GA Year: 2012

Description Southern Preservation Systems installed the CR-Series wing system during a parking garage repair project at the North Creek complex in Atlanta, Georgia. Soutnern Preservation Systems is an Approved Applicator for EMS products.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: Platinum Towers Parking Garage Atlanta, GA Year: 2012

Description Repairs to the Platinum Towers Parking Garage in Atlanta, Georgia required the use of the CR-Series wing expansion joint. The materials were installed by Southern Preservation Systems, an Approved Applicator for EMS products.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: CNN Parking Garage Atlanta, GA Year: 2012

Description The CNN Parking Garage repair project involved the installation of the CR-Series wing expansion joint system. The materials were installed by Southern Preservation Systems, an Approved Applicator for EMS products.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: Coca Cola HQ Atlanta, GA Year: 2010

Description The CR-Series winged expansion joint was selected for use at the Coca-Cola Headquarters in Atlanta, Georgia. The seal was installed by Southern Preservation Systems, a certified contractor for EMS products

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: Northside Alpharetta Parking Deck Atlanta, GA Year: 2013

Description Southern Preservation Systems, an Approved Applicator of EMS products, made repairs to the Northside Alpharetta Parking Deck in Atlanta, GA using the CR-Series Wing Seal.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rhonda Klande Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: Phipps Tower-Plaza Atlanta, GA Year: 2009

Description A variety of expansion joints were used on this project for the plaza deck and parking garage. The CR- Series winged seal was used in the parking garage. The DD-Series which is well suited for plaza decks was used for the park-like plaza in front of the Phipps Towers. For vertical applications, the CSS pre- compressed foam was used to blend in with the surrounding structures

Product(s): CR

Contractor: L S Decker Inc. Contact: Jeff Nelson Address: 552 West Atlanta St., Suite C Marietta, GA 30060 Phone: 770-218-2212 Website: www.lsdecker.com

A/E Firm: Little Diversified Architectural Consulting Address: 5815 Westpark Drive Charlotte, NC 28217 Phone: 704-525-6350 Website: www.littleonline.com

Project: Atlanta Airport Parking Garage Repairs Atlanta, GA Year: 2009

Description This project involved replacement of over 2,000 LF of winged expansion joint system. The CR-series system was used with the Polycrete HA (hot applied) system. Although the Polycrete HA is rarely used, the engineer for this project felt the properties of the hot applied system would work well on the upper levels of the busy parking deck.

Product(s): CR

Contractor: Western Waterproofing Contact: Ron Delk Address: 3790 Browns Mill Road SE Atlanta, GA 30354 Phone: 678-553-0170 Website: www.westerngroup.com

A/E Firm: TEC Services Address: 235 Buford Drive Lawrenceville, GA 30045 Phone: 866-562-8549 Website: www.tecservices.com

Project: Museum Tower Condominiums Parking Deck Atlanta, GA Year: 2012

Description Southern Preservation Systems, a certified applicator for EMS products installed both the CR-Series expansion joint systems as part of the overall repair requirements for the Museum Tower Condominiums Parking Deck in Atlanta, Georgia.

Product(s): CR

Contractor: Southern Preservation Systems Contact: Rick Ramsdell Address: 3170 Lenora Church Road, SW Snellville, GA 30039 Phone: 770-982-9970 Website: www.spsatl.com

Project: Physicians’ Clinic of Iowa Cedar Rapids, IA Year: 2015

Description Vector Construction installed 120 LF of various sizes of our CR-Series at the Physicians’ Clinic of Iowa. Vector Construction is an approved application for EMS wing seal products.

Product(s): CR

Contractor: Vector Construction Contact: Bruce Marsh Address: 250 41st Avenue Dr., SW Cedar Rapids, IA 52404 Phone: 319-560-6609 Website: www.vector-construction.com

Project: St. Luke's Hospital Cedar Rapids, IA Year: 2014

Description Vector Construction is a certified contractor for EMS products. They installed the CR-Series expansion joint system and CSS-Series foam seal for the repair of the St. Luke's Hospital in Cedar Rapids, IA.

Product(s): CR, CSS

Contractor: Vector Construction Contact: Adam Duffy Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: Veterans Memorial Stadium Cedar Rapids, IA Year: 2011

Description Veterans Memorial Stadium in Cedar Rapids, Iowa, required a variety of expansion joints to meet the various repair requirements in the structure. The CR-Series wing seal was used in various areas in the concourse to replace an existing wing seal, while the CST-Series foam seal was used in traffic-grade areas where blockouts did not exist to accommodate a wing seal. For the treads and risers in the stadium bowl, the CSS-Series pre-compressed foam seal was used because the splices for treads and risers can be completed at the factor or on-site. All of these materials were installed by Vector Construction, a certified applicator for EMS products.

Product(s): CR, CSS, CST

Contractor: Vector Construction Contact: Byron Greenwaldt Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: Harrah's Casino Garage Council Bluffs, IA Year: 2015

Description McGill Restoration, an approved applicator of EMS products, made a repair at the Harrah’s Casino Garage in Council Bluffs, IA using our CR-Series wing seal. The CR was used as product of choice in this situation due to its resilience to both traffic and pedestrian surfaces.

Product(s): CR

Contractor: McGill Restoration Contact: Jeff Benning Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Mercy Hospital Garage Council Bluffs, IA Year: 2014

Description McGill Restoration, an Approved Applicator of EMS products, made a repair at the parking garage of Mercy Hospital in Council Bluffs, IA using the CR-Series Wing Seal.

Product(s): CR

Contractor: McGill Restoration Contact: Jeff Benning Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

A/E Firm: Address: Phone: Website:

Project: Mercy Hospital in Council Bluffs, IA Council Bluffs, IA Year: 2013

Description McGill Restoration, an Approved Applicator of EMS products, made a repair at the parking garage of Mercy Hospital in Council Bluffs, IA using the CR Wing Seal.

Product(s): CR

Contractor: McGill Restoration Contact: Jeff Benning Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Finley Hospital Parking Garage Dubuque, IA Year: 2010

Description Vector Construction is a certified contractor for EMS products. They installed the CR-Series expansion joint system for the repair of the Finley Hospital Parking Garage.

Product(s): CR

Contractor: Vector Construction Contact: Byron Greenwaldt Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: University of Iowa Iowa City, IA Year: 2014

Description Vector Construction is a certified contractor for EMS products. They installed the CR-Series expansion joint system and Flexible Gutter System for the repair of the parking garage at the University of Iowa in Iowa City.

Product(s): CR, Flexible Gutter

Contractor: Vector Construction Contact: Adam Duffy Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: KU Medical Center Parking Garage Kansas City, KS Year: 2010

Description The CR-Series winged expansion joint was used for the KU Medical Center Parking Garage in Kansas City, Kansas. Crossland Construction performed the installation of this system in the new parking garage.

Product(s): CR

Contractor: Crossland Construction Contact: Dexter Opela Address: 833 South East Avenue Columbus, KS 66725 Phone: 620-429-1414 Website: www.crosslandconstruction.com

A/E Firm: Walter P. Moore Address: 920 Main Street, 10th Floor Kansas City, MO 64105 Phone: 816-701-2100 Website: www.walterpmoore.com

Project: St. Elizabeth Hospital Parking Garage Edgewood, KY Year: 2011

Description The St. Elizabeth Hospital Parking Garage repair project in Edgewood, Kentucky used two different types of wing seal: the CR-Sereis with Polycrete nosing material and the EB-Series with elastomeric blocks. The products were installed by M3 Restoration.

Product(s): CR, EB

Contractor: M3 Restoration Contact: John Couillard Address: 6545 Flying Cloud Drive Eden Prairie, MN 55344 Phone: 888-267-9710 Website: www.m3restoration.com

Project: Lakeside Shopping Center Parking Garage Metairie, LA Year: 2010

Description The Lakeside Shopping Center Parking Garage project utilized both the CR-Series wing seal and the JP- Series compression seal. The wing seal was primarily used in the drive lanes of the garage while the compression seal was used around the elevators and stair towers. The expansion joint systems were installed by Python Corporation, a certified applicator for EMS products.

Product(s): CR, JP

Contractor: Python Corporation Contact: Joseph Wright Address: 29279 Highway 190 Lacombe, LA 70445 Phone: 800-643-0916 Website: www.pythoncorp.com

Project: Mount Washington Center Baltimore, MD Year: 2014

Description Repairs were made at the Mount Washington Center by C.A. Lindman of Maryland. C.A. Lindman installed the CR-Series wing seal expansion joint system in concordance with the repair procedures.

Product(s): CR

Contractor: CA Lindman Contact: Mike Levicki Address: 10401 Guilford Road Jessup, MD 20794 Phone: 301-470-4700 Website: www.calindman.com

Project: Calvert Street Parking Garage Baltimore, MD Year: 2006

Description The CR-Series winged expansion joint was used for repairs at the Calvert Street Parking Garage in Baltimore, Maryland. The seal was installed by Advanced Caulking and Waterproofing from Fairfax, Virginia.

Product(s): CR

Contractor: Advanced Caulking & Waterproofing Contact: Lelan Butler Address: 2817 Door Ave. Fairfax, VA 22031 Phone: 703-560-0200 Website:

Project: 7501 Wisconsin Bethesda, MD Year: 2014

Description Restoration East made repairs at the 7501 Wisconsin Parking Garage in Bethesda, MD using the CR-Series wing seal. Restoration East is an Approved Applicator of EMS products.

Product(s): CR

Contractor: Restoration East Contact: Jeremy James Address: 4209 E. Chase Street Baltimore, MD 21205 Phone: 410-563-4972 Website: www.restorationeast.com

Project: 12505 Park Potomac Ave. Potomac, MD Year: 2014

Description Concrete Protection and Restoration installed various expansion joint systems for the repair of the parking garage at 12505 Park Potomac Avenue in Potomac, MD.

Product(s): CR, ALCP, CSS

Contractor: Concrete Protection & Restoration Contact: David Reis Address: 2811 Lord Baltimore Drive Baltimore, MD 21244 Phone: 410-298-2669 Website: www.c-p-rinc.com

Project: Pickering Square Parking Garage Bangor, ME Year: 2009

Description Hascall and Hall was selected to complete the repairs on the Pickering Square Parking Garage located in Bangor, Maine. One part of the repair was the replacement of the expansion joint system. The CR-Series wing expansion joint was used for this project.

Product(s): CR

Contractor: Hascall & Hall Contact: Glen O'Donnell Address: 273 Presumpscot Street Portland, ME 04104 Phone: 207-775-1481 Website: www.hascallandhall.com

A/E Firm: Becker Structural Engineers Address: 75 York Street Portland, ME 04104 Phone: 207-879-1838 Website: www.beckerstructural.com

Project: U & M Parking Structure Ann Arbor, MI Year: 2013

Description Meridian Contracting Services made repairs to the U & M Parking Structure in Ann Arbor, MI using the CR-Series Wing Seal. Meridian Contracting Services is an Approved Applicator of EMS products.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm St. Alpena, MI 49707 Phone: 989-354-4825 Website: meridianrestore.com

A/E Firm: University of Michigan A/E Address: 326 East Hoover Ave. Ann Arbor, MI 48109 Phone: 734-763-3020 Website: www.umaec.umich.edu

Project: Univ of MI - NC 100 Ann Arbor, MI Year: 2013

Description Repairs to the Univeristy of Michigan - NC 100 parking garage were performed by Meridian Construction using CR wing seal and ALCP cover plate.

Product(s): CR, ALCP, Polycrete II

Contractor: Meridian Construction Contact: Paul McConnell Address: 304 W. Chisholm St. Alpena, MI 49707 Phone: 989-354-4825 Website: meridianrestore.com

A/E Firm: Walker Parking Consultants Address: 525 Avis Drive, Suite 1 Ann Arbor, MI 48108 Phone: 734-663-1070 Website: www.walkerparking.com

Project: University of Michigan Parking Garage A (M18) Ann Arbor, MI Year: 2012

Description Meridian Contracting Services installed the CR-Series wing expansion joint system and the EOS-Series compression seal as part of the overall repair project for Parking Garage A (M18) at the University of Michigan in Ann Arbor, Michigan. Meridian Contracting Services is an approved applicator for EMS products.

Product(s): CR, EOS

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

Project: University of Michigan Medical Center M18 Garage Ann Arbor, MI Year: 2011

Description The CR-Series wing expansion joint was used to replace the existing expansion joint system at the University of Michigan Medical Center M18 in Ann Arbor, Michigan. Meridian Contracting Services, a certified applicator for EMS products, performed the repair and restoration work for this project

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

Project: Wayne State University Parking Garage No. 3 Detroit, MI Year: 2012

Description Meridian Contracting Services installed the CR-Series wing expansion joint system as part of the overall repair project for Parking Garage No. 3 at Wayne State University in Detroit, Michigan. Meridian Contracting Services is an approved applicator for EMS products.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

A/E Firm: Walker Parking Consultants Address: 525 Avis Drive, Suite 1 Ann Arbor, MI 48108 Phone: 734-663-1070 Website: www.walkerparking.com

Project: McClaren Hospital Parking Garage Flint, MI Year: 2012

Description Meridian Contracting Services installed the CR-Series wing expansion joint system in the parking garage at the McClaren Hospital in Flint, Michigan as part of a repair and restoration project at the garage. Meridian Contracting Services is an approved applicator for EMS products.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

Project: Mill Street Parking Structure Flint, MI Year: 2013

Description Repairs were made at the Mill Street Parking Structure at the University of Michigan at Flint by Meridian Contracting Services, who installed the CR-Series Wing Seal. Meridian Contracting Services is an Approved Applicator for EMS products.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm St. Alpena, MI 49707 Phone: 989-354-4825 Website: meridianrestore.com

Project: North Capitol Parking Garage Repairs Lansing, MI Year: 2012

Description For this phase of the repair project for the North Capitol Parking Garage in Lansing, Michigan. Meridian Contracting Services, an approved applicator for EMS products, installed the CR-Series wing expansion joint system.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

Project: Capitol View Office Complex Parking Garage Repairs Lansing, MI Year: 2011

Description The repairs to the Capitol View Office Complex parking garage in Lansing, Michigan required the use of both the CR-Series wing expansion joint system and the JP-Series two-part epoxy compression seal. The products were installed by Meridian Contracting Services, an approved applicator for EMS products.

Product(s): CR, JP

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

A/E Firm: Hobbs + Black Architects Address: 117 E. Allegan St. Lansing, MI 48933 Phone: 517-484-4870 Website: www.hobbs-black.com

Project: North Capitol Parking Garage Repairs Lansing, MI Year: 2011

Description Meridian Contracting Services installed the CR-Series wing expansion joint system as part of the overall repair project for the North Capitol Parking Garage in Lansing, Michigan. Meridian Contracting Services is an approved applicator for EMS products.

Product(s): CR

Contractor: Meridian Contracting Services Contact: Paul McConnell Address: 304 W. Chisholm Street Alpena, MI 49707 Phone: 989-354-4825 Website: www.mericon.net

Project: Foley Parking Ramp (Snowmelt System Repair) Anoka, MN Year: 2015

Description Dziedzic Caulking installed our CR-Series wing joint system as part of the Snowmelt System Repair project at the Foley Parking Ramp in Anoka, MN.

Product(s): CR

Contractor: Dziedzic Caulking Contact: Paul Dziedzic Address: 3928 168th Ave. NW Andover, MN 55304 Phone: 763-712-0333

A/E Firm: Walker Parking Address: 1660 S. Highway 100, Suite 424 Minneapolis, MN 55416 Phone: 952-595-9116 Website: www.walkerparking.com

Project: Wells Fargo Plaza Parking Garage Bloomington, MN Year: 2011

Description RAM Construction Services used the CR-Series wing seal expansion joint for the Wells Fargo Plaza Parking Garage in Bloomington, Minnesota.

Product(s): CR

Contractor: RAM Construction Services Contact: Bryan Dziuban Address: 3065 Spruce Street, Suite 103 Little Canada, MN 55117 Phone: 651-765-1950 Website: www.ramconstructionservices.com

Project: Northland Center Parking Ramp Duluth, MN Year: 2015

Description Project Restoration, Inc., an approved application of EMS products, installed the CST and CR series expansion joints as part of the renovation project at the Northland Center Parking Ramp project. The CST is a traffic-grade foam seal and the CR is also resilient to both vehicular and pedestrian grade traffic.

Product(s): CST, CR

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: St. Luke's Hospital Parking Garage Duluth, MN Year: 2011

Description For St. Luke's Hospital Parking Garage repair project, Vector Construction removed the existing wing expansion joint system and installed the CR-Series wing system.

Product(s): CR

Contractor: Vector Construction Contact: Byron Greenwaldt Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: St. Luke's Hospital Parking Garage Duluth, MN Year: 2012

Description For the second phase of the St. Luke's Hospital Parking Garage repair project, Vector Construction removed the existing wing expansion joint system and installed the CR-Series wing system. Vector Construction is an Approved Applicator for EMS products.

Product(s): CR

Contractor: Vector Construction Contact: Byron Greenwaldt Address: 250 41st Ave. Dr. Cedar Rapids, IA 52408 Phone: 319-364-5355 Website: www.vectorgroup.com

Project: 50th & France Parking Ramp Edina, MN Year: 2014

Description Repairs were made at the 50th and France Parking Ramp in Edina, MN by Restoration Systems of Chaska, MN. Restoration Systems installed the DW-Series and CR-Series wing seal expansion joint systems in concordance with the repair procedures.

Product(s): DW, CR

Contractor: Restoration Systems Contact: Blake Dronan Address: 1605 Old Audobon Chaska, MN 55318 Phone: 952-368-0463 Website: www.restorationsystems.com

Project: Minnesota Convention Center Minneapolis, MN Year: 2013

Description Repairs were made to the Minnesota Convention Center Parking Garage by LS Black Constructors, who installed the ES-Series, CR-Series Wing Seal and CSS-Series Foam Seal.

Product(s): ES, CR, CSS

Contractor: LS Black Constructors, Inc. Contact: John Couillard Address: 1959 Sloan Place, Suite 140 St. Paul, MN 55117 Phone: 651-774-8445 Website: www.lsblack.com

Project: Hennepin Medical Center Minneapolis, MN Year: 2015

Description The CR-Series wing seal expansion joint system was installed by Project Restoration, Inc. in the Hennepin Medical Center in Minneapolis, MN, as a continuation of the repair project in 2015.

Product(s): CR

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: Minneapolis Community and Technical College Minneapolis, MN Year: 2015

Description Repairs were made by Project Restoration, Inc. at Minneapolis Community and Technical College (MCTC) using the CR and DW winged seal systems, which were chosen because they are resilient to both vehicular and pedestrian traffic. Project Restoration, Inc. is an approved applicator of EMS wing seal products.

Product(s): CR, DW

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: University of Minnesota Parking Garage Minneapolis, MN Year: 2011

Description Paragon Restoration installed the CR-Series wing expansion joint systems as part of the overall repair project for the parking garage at the Universilty of Minnesota in Minneapolis.

Product(s): CR

Contractor: Paragon Restoration II Contact: Dave Park Address: 21539 Cedar Ave. Lakeville, MN 55044 Phone: 952-469-1568 Website: www.paragonrestoration2.com

A/E Firm: Palanisami & Associates, Inc. Address: 5661 International Pkwy New Hope, MN 55428 Phone: 763-533-9403 Website: www.palanisami.com

Project: Hennepin Medical Center Minneapolis, MN Year: 2015

Description The CR-Series wing seal expansion joint system was installed by Project Restoration, Inc. in the Hennepin Medical Center in Minneapolis, MN, as part of the repair project in 2015.

Product(s): CR

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: Jerry Haaf Memorial Parking Ramp Minneapolis, MN Year: 2015

Description Repairs were made at the Jerry Haaf Memorial Parking Ramp in Downtown Minneapolis, MN using 60 LF of CR-series wing seal and 60 LF of stainless steel wall retainer bars. The repairs were performed by Project Restoration, Inc., an approved applicator of EMS products.

Product(s): CR

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: Mayo Ramp - Mayo Clinic Minneapolis, MN Year: 2015

Description Repairs were made to the Mayo Ramp at the Mayo Clinic in Minneapolis, MN by Project Restoration, Inc., an approved applicator of EMS products. Our CR-Series, ES-Series (Urethane Wide Joint) and EB-Series (Elastomeric Block) were chosen as the repair products for this specific project due to their resilience to traffic and ease of installation.

Product(s): CR, ES, EB

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

Project: 11th and Marquette Parking Facility Minneapolis, MN Year: 2014

Description Repairs were made at the 11th and Marquette Parking Facility in Minneapolis, MN by Project Restoration, Inc., who installed the CR-Series wing seal, the CSS-Series foam seal and the ES-Series. Walker Parking Consultants provided architectural and engineering expertise on this repair project as well.

Product(s): CR, CSS, ES

Contractor: Project Restoration, Inc. Contact: Kris Starkey Address: 141 East 4th St., Suite 203 St. Paul, MN 55101 Phone: 651-252-1229 Website: www.projectrestorations.com

A/E Firm: Walker Parking Consultants Address: 1660 S. Highway 100, Suite 424 Minneapolis, MN 55416 Phone: 952-595-9116 Website: www.walkerparking.com

Project: Lowes of Central Charlotte Charlotte, NC Year: 2014

Description Repairs were made in the parking garage of Lowes, Charlotte, NC using the EB-Series and CR-Series wing seals. These repairs were made by Strickland Waterproofing Company of Charlotte.

Product(s): EB, CR

Contractor: Strickland Waterproofing Company Contact: Wade Holland Address: 500 N. Hoskins Road Charlotte, NC 28216 Phone: 800-501-5070 Website: www.stricklandwaterproofing.com

Project: CHS NE Visitor PD Repairs Concord, NC Year: 2015

Description Stone Restoration of America, an approved applicator of EMS wing seal products, installed 65 LF of CR- 400 as part of the repair project at the CHS NE Visitor PD repairs in Concord, NC.

Product(s): CR

Contractor: Stone Restoration Contact: Debbie Nye Address: 2601 Wilkinson Blvd. Charlotte, NC 28208 Phone: 704-697-9909 Website: www.stoneres.com

Project: Bismarck Parking Ramp Bismarck, ND Year: 2014

Description Repairs were performed by Global Caulking at the Bismarck Parking Ramp in Bismarck, ND. Global Caulking installed the CR-Series wing seal and the JP-Series compression seal in concordance with the repair procedures at the site.

Product(s): CR, JP

Contractor: Global Caulking Contact: James Lawson Address: PO Box 610 Sturgis, SD 57785 Phone: 605-381-5040 Website:

A/E Firm: Walker Parking Consultants Address: 1660 S. Highway 100, Suite 424 Minneapolis, MN 55416 Phone: 952-595-9116 Website: www.walkerparking.com

Project: University of Nebraska Parking Garage Lincoln, NE Year: 2007

Description McGill Restoration was selected for the repair/restoration of a parking garage at the University of Nebraska in Lincoln. The CR-Series wing expansion joint system was used for these repairs because it is well suited for pedestrian and vehicular traffic.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: West Haymarket Parking Garage Lincoln, NE Year: 2013

Description McGill Brothers installed the CR-Series wing seal and the CSS Foam Seal at the West Haymarket Parking garage. McGill Brothers is an Approved Applicator for EMS products.

Product(s): CR & CSS

Contractor: McGill Brothers Contact: Joe McGill Address: 1402 S 50th St. Omaha, NE 68106 Phone: 402-556-0915 Website: mcgillbrothersomaha.com

A/E Firm: Davis Design Address: 1221 "N" St., Ste 600 Lincoln, NE 68505 Phone: 402-476-9700 Website: davisdesign.com

Project: Physicians Mutual Insurance Company Parking Garage Omaha, NE Year: 2011

Description McGill Restoration, a certified applicator for EMS products, selected the CR-Series wing seal for replacement of the existing expansion joint at the Physicians Mutual Insurance Company Parking Garage in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Omaha Tower Blue Cross/Blue Shield Garage Omaha, NE Year: 2014

Description McGill Restoration, an Approved Applicator of EMS products, performed repairs at the Omaha Tower Blue Cross/Blue Shield Parking Garage in Omaha, NE. McGill Restoration installed the CR-Series wing seal expansion joint system in concordance with the repair procedures.

Product(s): CR

Contractor: McGill Restoration Contact: Rich McGill Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Bergan Mercy Medical Center Parking Garage Omaha, NE Year: 2011

Description McGill Restoration, a certified applicator for EMS products, selected the CR-Series wing seal for replacement of the existing expansion joint at the Bergan Mercy Medical Center Parking Garage in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Douglas Street Parking Garage Omaha, NE Year: 2011

Description The CR-Series wing expansion joint was used to replace the existing expansion joint system at the Douglas Street Parking Garage in Omaha, Nebraska. McGill Restoration, a certified applicator for EMS products, performed the repair and restoration work for this project.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Double Tree Parking Garage Omaha, NE Year: 2010

Description The CR-Series winged expansion joint was selected for repairs at the Double Tree Hotel Parking Garage in Omaha, Nebraska. The existing expansion joint was removed and the replacement material was installed by Mid-Continental Restoration, a certified contractor for EMS products.

Product(s): CR

Contractor: Mid-Continental Restoration Contact: Matt Deloney Address: 401 Hudson Road P.O. Box 429 Fort Scott, KS 66701 Phone: 800-835-3700 Website: www.midcontinental.com

Project: Mutual of Omaha Parking Ramp B Omaha, NE Year: 2011

Description McGill Restoration, a certified applicator for EMS products, selected the CR-Series wing seal for replacement of the existing expansion joint at the Mutual of Omaha Insurance Company Parking Ramp B in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Midtown Crossing Parking Garage Omaha, NE Year: 2009

Description Mid-Town Crossing is a mixed-use, pedestrian friendly community located in Omaha, Nebraska. The complex includes two parking garages (680 and 1835 stalls). McGill Restoration was contracted to install the expansion joints in these garages. The CR-Series wing expansion joint and the JP-Series compression seal were both used in these parking structures.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

A/E Firm: Cope Linder Architects Address: 30 South 15th Street Philadelphia, PA 19102 Phone: 215-981-0200 Website: www.cope-linder.com

Project: Bergan Mercy Medical Center Parking Garage Omaha, NE Year: 2015

Description McGill Restoration installed the CSS foam seal and CR wing seal during repairs at the Bergan Mercy Medical Center Parking Garage in Omaha, NE. The repairs were made in concordance with the repair procedures of the project, as well as the installation procedures for both products.

Product(s): CSS, CR

Contractor: McGill Restoration Contact: Jeff Benning Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Durham Museum Omaha, NE Year: 2015

Description Repairs were made at the Durham Museum Parking Garage in Omaha, NE by McGill Restoration, an Approved Applicator for EMS products. McGill installed the J-Series compression seal and the CR-Series wing seal expansion joint system in concordance with the repair procedures of the project.

Product(s): J, CR

Contractor: McGill Restoration Contact: Tim McGill Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Creighton University Omaha, NE Year: 2012

Description McGill Brothers installed the CR-Sereis expansion joint system at a parking garage at Creighton University in Omaha, Nebraska. McGill Brothers is an Approved Applicator for EMS products.

Product(s): CR

Contractor: McGill Brothers Contact: Joe McGill Address: 1402 S 50th St. Omaha, NE 68106 Phone: 402-556-0915 Website: mcgillbrothersomaha.com

Project: Nebraska Medical Center Parking Garage Omaha, NE Year: 2012

Description McGill Restoration, an Approved Applicator for EMS products installed the CR-Series expansion joint system as part of the Parking Garage repair project at the Nebraska Medical Center in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Omaha World Herald Parking Garage Omaha, NE Year: 2012

Description McGill Restoration, an Approved Applicator for EMS products installed the CR-Series expansion joint system as part of the Omaha World Herald Parking Garage repair project at the in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: University of Nebraska Medical Center Parking Garage Lot 50 Omaha, NE Year: 2011

Description The CR-Series wing seal expansion joint system was used for repairs to the University of Nebraska Medical Center Parking Garage (Lot 50). McGill Restoration, a certified applicator for EMS products, installed the expansion joint system as part of the overall repair project.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

A/E Firm: Walker Parking Consultants Address: 1660 Highway 100 S., Suite 350 Minneapolis, MN 55416 Phone: 952-595-9116 Website: www.walkerparking.com

Project: Nebraska Medical Center South Tower Doctor's Parking Garage Omaha, NE Year: 2012

Description McGill Restoration, an Approved Applicator for EMS products installed the CR-Series expansion joint system as part of the South Tower Doctor's Parking Garage repair project at the Nebraska Medical Center in Omaha, Nebraska.

Product(s): CR

Contractor: McGill Restoration Contact: Tim McGill Jr. Address: 2821 Grebe Street Omaha, NE 68112 Phone: 402-558-7989 Website: www.mcgillomahane.com

Project: Whitehall Condominium Omaha, NE Year: 2013

Description McGill Brothers, an Approved Applicator of EMS products, installed the CR-Series Wing Seal in the new- build project of the Whitehall Condominium in Omaha, NE.

Product(s): CR

Contractor: McGill Brothers Contact: Joe McGill Jr. Address: 1402 S 50th St. Omaha, NE 68106 Phone: 402-556-0915 Website: mcgillbrothersomaha.com

Project: High Hanover Garage Portsmouth, NH Year: 2009

Description Hascall and Hall was contracted to complete the repairs on the High Hanover Garage in Portsmouth, New Hampshire. The CR-Series wing expansion joint system was used for this repair project.

Product(s): CR

Contractor: Hascall & Hall Contact: Glen O'Donnell Address: 273 Presumpscot Street Portland, ME 04104 Phone: 207-775-1481 Website: www.hascallandhall.com

A/E Firm: City of Portsmouth Municipal Offices Address: 1 Junkins Ave. Portsmouth, NH 03801 Phone: 603-610-7227 Website: www.cityofportsmouth.com

Project: New Jersey Transit Bus Garage Maplewood, NJ Year: 2011

Description The repairs to the NJ Transit Parking Garage in Maplewood, NJ required the use of the CR-Series expansion joint system. The materials were installed by Sparwick Contracting, a certified applicator for EMS products.

Product(s): CR

Contractor: Sparwick Contracting Contact: Brian Fagersten Address: 18 Route 94 Lafayette, NJ 07848 Phone: 973-300-4709

A/E Firm: NJ Transit Authority Address: 1 Penn Plaza E Newark, NJ 07105 Phone: 973-491-7546 Website: www.njtransit.com

Project: Walden Galleria Parking Garage Repairs Buffalo, NY Year: 2011

Description Highland Masonry and Restoration installed the CR-Series wing expansion joint system in the upper deck of the parking garage at the Walden Galleria Mall located in Buffalo, New York. Highland Masonry is a certified applicator for EMS products.

Product(s): CR

Contractor: Highland Masonry and Restoration Contact: Phil Gosner Address: 33 Ransier Dr. Buffalo, NY 14224 Phone: 716-712-0781

Project: NY Presbyterian Hospital Parking Garage New York, NY Year: 2015

Description Repairs were made to the NY Hospital Parking Garage in NYC by Related Services, who installed the CR- Series wing seal and the CST-Series foam seal expansion joint systems. Related Services is an Approved Applicator for EMS products.

Product(s): CR, CST

Contractor: Related Services Contact: John Goarin Address: 34th Floor 51 Madison Ave. New York, NY 10010 Phone: 212-251-9677

Project: Rochester Airport Parking Garage Rochester, NY Year: 2011

Description Repairs to the Rochester Airport Parking Garage were made using the CR-Series wing seal for horizontal applications in the drive lanes, and the CSS-Series pre-compressed foam seal where the joint opening was vertical. The materials were installed by Highland Masonry, a certified applicator for EMS products.

Product(s): CR

Contractor: Highland Masonry and Restoration Contact: Charlie Rewers Address: 33 Ransier Dr. Buffalo, NY 14224 Phone: 716-712-0781

A/E Firm: T. Y. Lin International Group Address: 225 East Avenue Rochester, NY 14604 Phone: 585-512-2000 Website: www.tylin.com

Project: Stony Brook Hospital Parking Garage Stony Brook, NY Year: 2013

Description Repairs were made at the Stony Brook Hospital Parking Garage using the CR-Series Wing Seal. Patterson- Stevens is an Approved Applicator for EMS products.

Product(s): CR

Contractor: Patterson-Stevens Contact: Todd Dowling Address: 400 Sawyer Ave Tonawanda, NY 14150 Phone: 716-873-5300 Website: www.pattersonstevens.com

Project: Akron Children's Hospital Parking Garage Akron, OH Year: 2008

Description This project involved replacement of existing expansion joint system. This required extensive repair of the existing blockouts to properly prepare the joint opening for the installation of the CR-Series winged expansion joint system.

Product(s): CR

Contractor: Allied Restoration Contact: Rod Hoover Address: 1401 Pimken Place, SW Canton, OH 44706 Phone: 330-458-4050

Project: CRAA Parking Garage Phase 1 (Columbus Airport) Columbus, OH Year: 2015

Description Pettibone Concrete Construction, Inc., installed the CR-Series wing seal expansion joint system and the ES- Series Seal as part of the Phase 1 repair project at the CRAA Parking Garage in the Columbus, Ohio Airport.

Product(s): CR, ES

Contractor: Pettibone Concrete Construction, Inc. Contact: John Pettibone Address: 9531 Ashville-Fairfield Rd Ashville, OH 43103 Phone: 740-983-4600

Project: Winstar World Casino Parking Garage Thackerville, OK Year: 2011

Description The parking garage at the Winstar World Casino in Thackerville, Oklahoma is modeled after the Palace of Westminster and includes a replica of the bell tower (Big Ben). The CR-Series expansion joint system was installed by Southwest Construction Services, a certified applicator for EMS products.

Product(s): CR

Contractor: Southwest Construction Services Contact: Jason Taylor Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

A/E Firm: Stromberg Architectural Address: 4400 Oneal St. Greenville, TX 75402 Phone: 903-454-0904 Website: www.strombergarchitectural.com

Project: Lehigh Valley Hospital Parking Garage Allentown, PA Year: 2012

Description The Lehigh Valley Hospital Parking Garage repair project in Allentown, Pennsylvania included installation of the CR-Series expansion joint system. The materials were installed by Melrose Enterprises, an Approved Applicator for EMS products.

Product(s): CR

Contractor: Melrose Enterprises Contact: Jay Sanders Address: 130 Dickerson Road North Wales, PA 19454 Phone: 215-699-4599 Website: www.melrsoeltd.com

Project: Shaw Building Monroeville, PA Year: 2015

Description Carl Walker Construction was chosen to repair/replace the expansion joints at the Shaw Building in Monroeville, PA using the CR-Series wing joint due to its resilience to both pedestrian and vehicular traffic conditions.

Product(s): CR

Contractor: Carl Walker Construction Contact: Greg Heddaeus Address: 935 Vista Park Drive Pittsburgh, PA 15205 Phone: 412-490-2924 Website: www.carlwalkerconstruction.com

Project: Carnegie Mellon University Parking Garage Pittsburgh, PA Year: 2005

Description Carl Walker Construction was contracted to repair/replace the expansion joints at the Carnegie Mellon University parking garage in Pittsburgh, Pennsylvania. The CR-Series winged system was selected for this project.

Product(s): CR

Contractor: Carl Walker Construction Contact: Joe White Address: 935 Vista Park Drive Pittsburgh, PA 15205 Phone: 412-490-2924 Website: www.carlwalkerconstruction.com

Project: Texas A & M University Parking Garage Repairs College Station, TX Year: 2012

Description Structural Concrete Systems installed the CR-Series wing expansion joint system and the CSS-Series pre- compressed foam seal as part of the overall repair project for the parking garage at Texas A & M University in College Station, Texas.

Product(s): CR. CSS

Contractor: Structural Concrete Systems Contact: Damon DiBassie Address: P.O. Box 680396 Houston, TX 77268 Phone: 281-583-7776 Website: www.structuralconcretesystems.com

A/E Firm: Kimley-Horn and Associates Address: 2 Sun Court, Suite 450 Norcross, GA 30092 Phone: 770-825-0744 Website: www.kimley-horn.com

Project: Lincoln-Knox Dallas, TX Year: 2015

Description Southwest Construction Services, an approved applicator of EMS products, installed 500 LF of various sizes of the CR-Series wing joint in the new-build, multi-million dollar redevelopment project at Lincoln-Knox in Dallas, TX.

Product(s): CR

Contractor: Southwest Construction Services Contact: Ken Allen Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

Project: Plaza at Preston Center Dallas, TX Year: 2015

Description Southwest Construction Services made repairs to the Plaza at Preston Center in Dallas, TX using the CR- Series wing seal expansion joint system. Southwest Construction Services is an Approved Applicator of EMS products.

Product(s): CR

Contractor: Southwest Construction Services Contact: Ernie Adams Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

A/E Firm: Rogers-O' Brien Construction Address: 1901 Regal Row Dallas, TX 75235 Phone: 214-962-3000 Website: www.rogers-obrien.com

Project: Dallas/Fort Worth Int'l. Airport Terminal D DFW Airport, TX Year: 2014

Description Repairs were made at the Dallas/Fort Worth International Airport Terminal D in TX, where K-Post installed the CR-Series wing seal as part of the repair requirements.

Product(s): CR

Contractor: K Post Contact: Shawn Morgan Address: 1841 W. Northwest Highway Dallas, TX 75220 Phone: 972-910-8777 Website: www.kpostcompany.com

Project: Preston Ridge Parking Garage Frisco, TX Year: 2012

Description Southwest Construction installed the CR-Series wing seal as part of the repair project for the Preston Ridge Parking Garage located in Frisco, Texas. Southwest Construction is a certified applicator for EMS products.

Product(s): CR

Contractor: Southwest Construction Services Contact: Jason Taylor Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

Project: Energy Crossing Houston, TX Year: 2008

Description Energy Crossing is an office complex in Houston, Texas. Southwest Construction was contracted to install the CR-Series winged expansion joint in this development.

Product(s): CR

Contractor: Southwest Construction Services Contact: Ernie Adams Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

A/E Firm: Opus West Corp. Address: 15455 Dallas Pkwy, Suite 450 Addison, TX 75001 Phone: 972-480-9787 Website: www.opuscorp.com

Project: Houston Hobby Airport Houston, TX Year: 2015

Description In one of our largest projects to date, Mayco Building Services installed 1,523 LF of various sizes of our CR-series wing joint and 28 LF of our JP-Series compression seal as part of the nearly 3,000 space new- build parking garage at the Houston Hobby airport. This parking garage is roughly three times the size of the terminal the Houston Hobby Airport and included a bridge to connect the new parking garage to the old.

Product(s): CR, JP

Contractor: Mayco Building Services Contact: Vince May Address: 6408 Deihl Rd. Houston, TX 77092 Phone: 713-682-7782 Website: www.maycobuilding.com

A/E Firm: Walker Parking Address: 2525 Bay Area Blvd #400 Houston, TX 77058 Phone: 281-280-0068 Website: www.walkerparking.com

Project: Shell Parking Garage Houston, TX Year: 2015

Description The CR-Series wing seal expansion joint system was used for repairs to the Shell Parking Garage in Houston, TX. ASI Sales, a certified applicator for EMS products, installed the expansion joint system as part of the overall repair project.

Product(s): CR

Contractor: ASI Sales, Inc. Contact: Joe Morrow Address: 214 North Loop 336 East Conroe, TX 77301 Phone: 713-851-5434 Website: www.architecturalsalesinc.com

Project: BP Parking Garage Houston, TX Year: 2007

Description EMS was chosen by Chamberlin Waterproofing to provide the expansion joints for the construction of the BP Parking Garage in Houston, Texas. The CR-Series winged seal system was used for horizontal applications while the AR-Series compression seal was installed in the vertical applications. These seals compliment each other well for horizontal to vertical transitions.

Product(s): CR, AR

Contractor: Chamberlin Waterproofing Contact: Joe Cotton Address: 7510 Langtry Houston, TX 77040 Phone: 713-880-1432 Website: www.chamberlinltd.com

Project: 5601 MacArthur Irving, TX Year: 2014

Description The repair project at the 5601 MacArthur Parking Garage in Irving, TX involved installation of the CR- Series wing seal expansion joint system. These repairs were executed by K-Post, an Approved Applicator of EMS products.

Product(s): CR

Contractor: K Post Contact: Shawn Morgan Address: 1841 W. Northwest Highway Dallas, TX 75220 Phone: 972-910-8777 Website: www.kpostcompany.com

Project: Fair Plaza Parking Garage Tyler, TX Year: 2014

Description Southwest Construction Services made installations in the new-build project at the Fair Plaza Parking Garage in Tyler, TX, which is the city of Tyler's first parking structure. These installations included using the CR-Series wing seal and the Flexible Gutter System.

Product(s): CR, Flexible Gutter

Contractor: Southwest Construction Services Contact: Jamie McCarroll Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

A/E Firm: Walker Parking Consultants Address: 2525 Bay Area Boulevard, Suite 400 Houston, TX 77058 Phone: 281-280-0068 Website: www.walkerparking.com

Project: East Texas Medical Center Parking Garage Tyler, TX Year: 2010

Description A variety of expansion joint systems were used for this parking garage and sky bridge, including CR-Series winged seal with Polycrete elastomeric concrete, JP-Series tension/compression seals with two-part epoxy and CSS pre-compressed foam seal for exterior vertical applications. This project demonstrates the use of multiple types of expansion joint systems to meet varying installation applications.

Product(s): CR, JP, CSS

Contractor: Southwest Construction Services Contact: Chris Doyle Address: 11430 Newkirk Street Dallas, TX 75229 Phone: 214-879-9948 Website: www.sw-construction.com

A/E Firm: HGA Architects and Engineers Address: 701 Washington Avenue N Minneapolis, MN 55401 Phone: 612-758-4000 Website: www.hga.com

Project: Metro Park Garage Alexandria, VA Year: 2011

Description Eastern Waterproofing and Restoration, Inc. (EWR) installed the CR-Series wing expansion joint in the parking garage of the Metro Park complex in Alexandria, Virginia. EWR is an approved applicator for EMS products.

Product(s): CR

Contractor: Eastern Waterproofing and Restoration, Inc. Contact: Rob Null Address: 7155 Montevideo Road Jessup, MD 20794 Phone: 410-7499-3203 Website: www.ewrcompanies.com

A/E Firm: CSG Consulting Engineers Address: 1451 Dolley Madison Boulevard, Suite 300 McLean, VA 22101 Phone: 703-917-0055 Website: www.csgengineer.com

Project: Ballston Parking Garage Arlington, VA Year: 2013

Description Repairs to the Ballston Parking Garage in Arlington, VA were performed by Restoration East, an Approved Applicator for EMS products, using the CR-Series Wing Seal and the CSS-Series Foam Seal.

Product(s): CR, CSS

Contractor: Restoration East Contact: Jeremy James Address: 4209 E. Chase Street Baltimore, MD 21205 Phone: 410-563-4972 Website: www.restorationeast.com

Project: Westlee Condominium Arlington, VA Year: 2006

Description Advanced Caulking and Waterproofing was selected to install the expansion joints for this new build condominium development in Arlington, Virginia. The CR-Series expansion joint system was selected for its versatility and ability to accommodate vehicle and pedestrian traffic.

Product(s): CR

Contractor: Advanced Caulking & Waterproofing Contact: Lelan Butler Address: 2817 Door Ave. Fairfax, VA 22031 Phone: 703-560-0200

Project: Springfield Mall Parking Deck Fairfax, VA Year: 2011

Description Concrete Protection and Restoration (CPR), a certified contractor for EMS products, installed the CR-Series wing expansion joint system as part of the repair project for the Springfield Mall Parking Deck in Fairfax, Virginia.

Product(s): CR

Contractor: Concrete Protection & Restoration Contact: Shawn Whalen Address: 6737 Dogwood Road Baltimore, MD 21207 Phone: 410-298-2669 Website: www.c-p-rinc.com

A/E Firm: Haynes Whaley Associates Address: 1881 Campus Commons Dr. Reston, VA 20191 Phone: 703-391-0224 Website: www.hayneswhaley.com

Project: University of Mary Washington Parking Garage Fredericksburg, VA Year: 2006

Description The CR-Series winged seal was used for restoration work at one of the parking decks at the University of Mary Washington College in Fredericksburg, Virginia. The expansion joint system was installed by Advanced Caulking and Waterproofing.

Product(s): CR

Contractor: Advanced Caulking & Waterproofing Contact: Lelan Butler Address: 2817 Door Ave. Fairfax, VA 22031 Phone: 703-560-0200

Project: 1750 Tysons Blvd. Garage McLean, VA Year: 2014

Description Concrete Protection and Restoration made repairs to the parking garage at 1750 Tysons Blvd., McLean, VA. CPR installed the CR-Series wing seal, the CST-Series and CSS-Series foam seals, as well as the Aluminum Cover Plate (ALCP). The project was overseen by architectural and engineering firm SK&A.

Product(s): CR, CST, CSS, ALCP

Contractor: Concrete Protection & Restoration Contact: Phil Morabito Address: 2811 Lord Baltimore Drive Baltimore, MD 21244 Phone: 410-298-2669 Website: www.c-p-rinc.com

A/E Firm: SK&A Address: 12505 Park Potomac Ave., Suite 200 Potomac, MD 20854 Phone: 301-881-1441 Website: www.skaengineers.com

Project: Reston Executive Center Parking Garage Reston, VA Year: 2013

Description For the Reston Executive Center Parking Garage Repair project, the CR-Series wing expansion joint system and the CSS-Series pre-compressed foam seal were installed by Choice Restoration Services. Choice Restoration Services is an Approved Applicator for EMS products.

Product(s): CR, CSS

Contractor: Choice Restoration Services Contact: Bill Bailey Address: 3320 Weedon St. Curtis Bay, MD 21226 Phone: 410-609-2600 Website: www.choicerestorationsvcs.com

A/E Firm: Smislova, Kehnemui & Associates Address: 12505 Park Potomac Ave., Suite 200 Potomac, MD 20854 Phone: 301-881-1441 Website: www.skaengineers.com

Project: Metro Park Garage Springfield, VA Year: 2006

Description Metro Park is a 37-acre office park located in Springfield, Virginia. The development includes a 6-level parking garage to service tenants and visitors. Advanced Caulking and Waterproofing installed the CR- Series wing expansion joint in this garage.

Product(s): CR

Contractor: Advanced Caulking & Waterproofing Contact: Lelan Butler Address: 2817 Door Ave. Fairfax, VA 22031 Phone: 703-560-0200

Project: Old Gallows Road Project Vienna, VA Year: 2013

Description Eastern Waterproofing and Restoration, Inc. (EWR) installed the CR-Series wing expansion joint and the CST-Series foam seal in the parking garage of the Old Gallows Road Project in Vienna, VA. EWR is an approved applicator for EMS products.

Product(s): CR, CST

Contractor: Eastern Waterproofing and Restoration, Inc. Contact: Rob Null Address: 7175 Montevideo Road Jessup, MD 20794 Phone: 410-799-0900 Website: ewrcompanies.com

Project: 8521 Leesburg Pike Garage Vienna, VA Year: 2013

Description Restoration East made repairs to the 8521 Leesburg Pike Parking Garage in Vienna, VA, using the CR- Series wing seal. Restoration East is an Approved Applicator for EMS products.

Product(s): CR

Contractor: Restoration East Contact: Jeremy James Address: 4209 E. Chase Street Baltimore, MD 21205 Phone: 410-563-4972 Website: www.restorationeast.com

Project: LaCrosse Parking Ramp LaCrosse, WI Year: 2013

Description Repairs to the LaCrosse Parking Ramp were made by Miron Construciton using CR wing seal.

Product(s): CR

Contractor: Miron Construction Company Contact: John Nitzsche Address: 1471 McMahon Drive Neenhah, WI 54957 Phone: 920-969-7000 Website: miron-construction.com

Project: General Mitchell International Airport Parking Garage Repairs Milwaukee, WI Year: 2011

Description Concrete and Masonry Restoration (CMR) installed the CR-Series wing expansion joint system as part of the overall repair project for the parking garage at the General Mitchell International Airport (GMIA) in Milwaukee, Wisconsin. CMR is a certified applicator for EMS products.

Product(s): CR

Contractor: Concrete and Masonry Restoration, Inc. (CMR) Contact: Don Huber Address: 7290 N. Teutonia Ave. Milwaukee, WI 53209 Phone: 414-540-9600 Website: www.cmscmr.com

A/E Firm: Milwaukee County Department of Parks & Public Infrastructure Address: 2711 West Wells St., Second Floor Milwaukee, WI 83205 Phone: 414-278-4206

Project: City of Oshkosh Parking Deck Oshkosh, WI Year: 2015

Description Allsource Supply Co. installed our CR wing seal in concordance with repair procedures at the City of Oshkosh Parking Deck in Oshkosh, WI.

Product(s): CR

Contractor: Allsource Supply Co. Contact: Roy Magnuson Address: 3025 Heise Road Omro, WI 54963 Phone: 920-685-5560

Project: Charleston Medical Center Parking Garage Charleston, WV Year: 2006

Description Agsten Construction installed the CR-Series winged expansion joint in the parking garage at the Charleston Area Medical Center (CAMC). The CAMC is the largest health care system in the state of West Virginia.

Product(s): CR

Contractor: Agsten Construction Contact: Rick Holmes Address: 209 West Washington St., Suite 200 Charleston, WV 25302 Phone: 304-415-2698 Website: www.agstenconstruction.com