DOCSLIB.ORG

Special Industrial Burners and Combustion Equipment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Special Industrial Burners and Combustion Equipment Special Industrial Burners and Combustion Equipment INDEX ABOUT US 4 MISSION 5 APPLICATION 6 SERVICES 9 PRODUCTS 13 REFERENCES 32 4 ABOUT US ELCO extends its technical and based on a long and well proven commercial proposal thanks to the tradition of excellence in combustion recent acquisition of the BCE company engineering for the main industrial – Burners and Combustion Equipment applications. The production covers by Ariston Thermo Group. burners for any type of gaseous and Since 1987 ELCO designs, liquid fuel engineered to comply with manufactures and provides specific specific client’s technical requirements services for energy transformation in and emissions levels. the industrial sector. The company will insure a competent The Company is manufacturing a and adequate technical assistance wide range of industrial burners, to any client everywhere for the combustion systems, air heaters and installation, commissioning, start-up thermal oxidizers for the energy and and maintenance of the equipment petrochemical markets. It has been supplied. developing combustion expertise starting since the 70’s years and is producing burners for almost any combustion process; the design is 5 MISSION We shaped our capabilities and health and safety risk, protects the strengths so we can provide environment and the health and safety comprehensive technical and business of employees, customers, contractors, solutions. Through our core strengths and the public, while fully complying – Value Creation, Expertise, Innovation with applicable laws and regulations. and Operational Excellence, delivering a new era of technology vision enabling our customers to increase output and improve efficiency while preserving the environment. Our employees will fully integrate Environmental Health and Safety excellence into business and operations planning and decision making to achieve superior health and safety performance. The company will manage its operations in accordance with our Environmental Health & Safety, in a manner that controls occupational 6 APPLICATION ELCO supplies burners, components and services to all major boiler manufacturers and complete combustion systems to all major industrial clients for : ■ Steam generation ■ Power generation ■ Refineries ■ Chemical plants ■ Petro-chemical industry ■ Industries The company are provided to meet the maximum standards of combustion efficiency and the maximum degree of reliability under the most severe operating conditions. 7 Steam Generators Heat Recovery Steam Generators A water tube boiler is a type of boiler A heat recovery steam generator in which water circulates in tubes or HRSG is an energy recovery heat heated externally by the fire. Fuel is exchanger that recovers heat from a burned inside the furnace, creating hot hot gas stream, usually coming from gas which heats water in the steam- gas turbine or engines. It produces generating tubes. steam that can be used in a process The heated water then rises into the (cogeneration) or used to drive a steam steam drum. Here, saturated steam turbine (combined cycle). is drawn off the top of the drum. In HRSGs consist of four major some services (power generation), the components: the economizer, steam will reenter the furnace through evaporator, superheater and water a superheater to become superheated. preheater. The different components Superheated steam is a dry gas and are put together to meet the operating therefore used to drive turbines to requirements of the unit. produce electric energy by generator. Modular HRSGs can be categorized by a number of ways such as direction A fire-tube boiler is a type of boiler of exhaust gases flow or number of in which hot gases from a fire pass pressure levels. through one or more tubes running through a sealed container of water. The HRSGs systems could be of two The heat of the gases is transferred type: one, where gas turbine is coupled through the walls of the tubes by directly to the steam generator and thermal conduction, heating the water the major components are disposed and ultimately creating steam. in line: superheater, evaporator and Such boilers are usually used where economizer (one pressure level); this is are not requested high power and the typical application of our burners sometimes are preferred to water “DB” type, which are installed inside tube boiler thanks to their simpler the duct that connects gas turbine and configuration. steam generator. The other type is a classic steam generator: the exhaust Steam boilers are the typical gas coming from gas turbine reaches applications of our “M”, “DM” and “DT” the burners, which are installed on burners type which are designed and boiler front wall. This is the typical offered according to the emission application of our burners “M” or “DM” levels required and fuels to be burn. type, adapted for such application. In both cases the burner are suitable to work either with hot flue gas stream or fresh air. 8 APPLICATION Waste to Energy Systems Depending from incinerator’s characteristics and Client’s request we Waste-to-energy (WTE) is the process are able to design such combustion of generating energy in the form system complete with all ancillaries of electricity and/or heat from the equipment (combustion air fan, oil incineration of waste. WTE is a form of & gas skids and so on) and control energy recovery. Most WTE processes system. Usually, for the above produce electricity and/or heat directly application, we use “M” or “DM” burners through combustion. type. Incineration, the combustion of Heaters and Furnaces organic material such as waste with energy recovery, is the most In the industrial world are present a common WTE implementation. The huge range of industrial heaters and combustion of waste may produce process furnaces, which are necessary many pollutants that must be treated in various processes related to and reduced before the stack, to avoid refineries, gaseous and liquid streams environmental contamination. treatment or to metallurgical industry. In such systems is necessary to have a We are capable to supply some of its combustion system properly designed: products suitable for applications like the role of the burner (or burners) air heaters, gas heaters, blast furnaces, is to heat up the furnace and the water bath heaters or glycol reboiler, combustion chamber during the start- kiln processes, refinery processes as up phases until a temperature suitable cracking or reforming, and particular for the introduction of waste and the burners for sulphur, installed on maintenance of the flame stability sulphuric acid production plants. by the same. Once the combustion chamber has reached the correct working temperature, the burner is moved in stand-by position and protected from the flame and flue acid gas generated by waste combustion. The burner will return in firing position only if the temperature in combustion chamber reaches the limits imposed by law, or to shut-down the incinerator. 9 SERVICES ELCO is close to its Customers and, Training of local personnel for this reason, is important for us to Our engineers will transfer their give all the necessary support, efficient knowledge, thanks to a long and quick, whenever is necessary. Our experience, to Client’s employees, for a service team personnel have a lot of correct maintenance and management experience in field application and of the combustion system. work closely with our technical offices in order to provide the best solution Evaluation and Revamping at your problems. We could provide a Our company has the capabilities to lot of services from consulting, presale evaluate your combustion system and after sale. and all the equipment installed to support the process i.e. valve Start-up and Commissioning and instrumentation train, burner Assistance management system, combustion air Working closely to power plant distribution, control system and so on manufacturer we are usually called in order to provide technical service to to start-up our combustion system, upgrade your system. A written relation and tuning our burners into the best with technical solutions, which enable configuration, which give to Client the our Client to choose the best way to best performance in terms of emission act, basing on its needs and financial levels and combustion efficiency. possibilities, usually follows such activities. 10 SERVICES CFD The company can provide support even for CFD (Computational Fluid Dynamics) studies; the CFD can be applied to many situations and applications and we usually provide such service to study the combustion air and flue gas mixing in application with FGR (Flue Gas Recirculation), to study the air distribution inside the burner and the flame shape and distribution, and to study the exhaust gas distribution to the burners coming from gas turbine in Heat Recovery Steam Generators in order to optimize the distribution, the emissions levels and to prevent backfires on the burners. 11 REVAMPING The company can provide a technical, competent and adequate support for revamping and retrofitting activities, in particular concerning the replacement of an old and obsolete combustion system with a new one in order to increase the safety, the performances and reach low emissions levels according to the local regulation and to optimize the combustion and increase the efficiency of the system. A really good interaction between our commercial and technical departments permits us to follow the client from the first evaluation activities and feasibility studies till the
Load more

Recommended publications
  • Thermal Analysis of an Industrial Furnace
    energies Article Thermal Analysis of an Industrial Furnace Mirko Filipponi 1,*, Federico Rossi 1, Andrea Presciutti 1, Stefania De Ciantis 1, Beatrice Castellani 1 and Ambro Carpinelli 2 1 CIRIAF (Centro Interuniversitario di Ricerca sull’Inquinamento e sull’Ambiente), Università degli Studi di Perugia, Via G. Duranti 67, 06125 Perugia, Italy; [email protected] (F.R.); [email protected] (A.P.); [email protected] (S.D.C.); [email protected] (B.C.) 2 Divisione Fucine di Acciai Speciali Terni, V.le B.Brin 218, 05100 Terni, Italy; [email protected] * Correspondence: mirko.fi[email protected]; Tel.: +39-0744-492-969 Academic Editor: Francesco Asdrubali Received: 17 May 2016; Accepted: 10 October 2016; Published: 18 October 2016 Abstract: Industries, which are mainly responsible for high energy consumption, need to invest in research projects in order to develop new managing systems for rational energy use, and to tackle the devastating effects of climate change caused by human behavior. The study described in this paper concerns the forging industry, where the production processes generally start with the heating of steel in furnaces, and continue with other processes, such as heat treatments and different forms of machining. One of the most critical operations, in terms of energy loss, is the opening of the furnace doors for insertion and extraction operations. During this time, the temperature of the furnaces decreases by hundreds of degrees in a few minutes. Because the dispersed heat needs to be supplied again through the combustion of fuel, increasing the consumption of energy and the pollutant emissions, the evaluation of the amount of lost energy is crucial for the development of systems which can contain this loss.
    [Show full text]
  • ENERGY-SAVING POSSIBILITIES for GAS-FIRED INDUSTRIAL FURNACES of the Various Available Nergy Efficiency Is a Top Pri- Perature
    ENERGY-SAVING POSSIBILITIES FOR GAS-FIRED INDUSTRIAL FURNACES Of the various available nergy efficiency is a top pri- perature. For a system without air ority in the steelmaking and preheat, efficiency decreases with options for increasing heat treating industries. Be- rising exhaust gas temperature. At a the energy efficiency cause hot exhaust gases repre- process temperature of 1000°C E sent the largest source for (1830°F), about 50% of the fuel input in industrial furnaces, losses in most industrial furnaces, will be lost as hot exhaust gas heat. preheating the combustion preheating the combustion air pro- To determine the usefullness of air vides the highest potential for energy preheat, the relative air preheat () air offers the most effective savings. This article discusses the ad- can be defined as: vantages of different strategies to way to increase efficiency boost energy efficiency and factors preheat - air ~ preheat = = in most furnaces. that must be considered when eval- exhaust - air exhaust uating their suitability for the appli- Joachim G. Wünning cation. where preheat is air preheat tempera- WS Inc., Elyria, Ohio ture, exhaust is hot exhaust tempera- Energy Efficiency ture, and air is air inlet temperature. Related to Flue Gas Losses The air preheat temperature is the Efficiency is usually defined as: temperature supplied to the burner. Energy losses between a central heat Efficiency = benefit exchanger and the burner have to be expenditure considered. The hot exhaust temper- ature is the temperature of the ex- Regarding firing systems for indus- haust gases leaving the furnace, trial furnaces, efficiency or available which, in most cases, is close to the heat, is defined as: process temperature.
    [Show full text]
  • Thermodynamic Aspects and Heat Transfer Characteristics of Hitac Furnaces with Regenerators Nabil Elias Rafidi
    Thermodynamic aspects and heat transfer characteristics of HiTAC furnaces with regenerators Nabil Elias Rafidi Doctoral Dissertation Royal Institute of Technology School of Industrial Engineering and Management Department Of Materials Science and Engineering Division of Energy and Furnace Technology Se- 100 44 Stockholm Sweden Akademisk avhandling som med tillstånd av Kungliga Tekniska Högskolan i Stockholm framlägges för offentlig granskning för avläggande av teknologie doktorsexamen torsdag den 15 dec 2005, kl. 10:00 i sal F3 och F4/Sem, Lindstedtsvägen 26, Kungliga Tekniska Högskolan, Stockholm. ISRN KTH/MSE--05/90--SE+ENERGY/AVH ISBN 91-7178-223-0 Nabil Elias Rafidi, Thermodynamic aspects and heat transfer characteristics of HiTAC furnaces with regenerators Royal Institute of Technology School of Industrial Engineering and Management Department Of Materials Science and Engineering Division of Energy and Furnace Technology Se- 100 44 Stockholm Sweden ISRN KTH/MSE--05/90--SE+ENERGY/AVH ISBN 91-7178-223-0 © Nabil Elias Rafidi, December 2005 ii Abstract Oxygen-diluted Combustion (OdC) technology has evolved from the concept of Excess Enthalpy Combustion and is characterized by reactants of low oxygen concentration and high temperature. Recent advances in this technology have demonstrated significant energy savings, high and uniform thermal field, low pollution, and the possibility for downsizing the equipment for a range of furnace applications. Moreover, the technology has shown promise for wider applications in various processes and power industries. The objectives of this thesis are to analyze the thermodynamic aspects of this novel combustion technology and to quantify the enhancement in efficiency and heat transfer inside a furnace in order to explore the potentials for reduced thermodynamic irreversibility of a combustion process and reduced energy consumption in an industrial furnace.
    [Show full text]
  • Journal of Energy Systems Digital Industrial Furnaces
    Journal of Energy Systems Volume 2, Issue 4 2602-2052 DOI: 10.30521/jes.474499 Research Article Digital industrial furnaces: Challenges for energy efficiency under VULKANO project Juan Carlos Antolín-Urbaneja Tecnalia Research & Innovation, Industry & Transport Division, Donostia-San Sebastián, Spain, [email protected] ORCID: 0000-0002-6444-9873 Asier González-González Tecnalia Research & Innovation, Industry & Transport Division, Miñano, Spain, [email protected] ORCID: 0000-0002-9409-513X Jose Manuel Lopez-Guede Basque Country University (UPV/EHU), Faculty of Engineering of Vitoria-Gasteiz, Department of Engineering Systems and Automatics, Vitoria-Gasteiz, Spain, [email protected] ORCID: 0000-0002-5310-1601 Jesús M. López De Ipiña Tecnalia Research & Innovation, Industry & Transport Division, Miñano, Spain, [email protected] ORCID: 0000-0003-0120-2811 Arrived: 24.10.2018 Accepted: 16.11.2018 Published: 31.12.2018 Abstract: Under intensive industry, industrial furnaces must cope with new challenges to improve the efficiency, reliability and flexibility of their processes. As they need a great amount of energy to achieve the temperature required for heating and melting processes, many researchers have been focused on the minimization of the energy consumption. This energy optimization implies improvements, not only in the competitiveness, but also in environmental and cost performances of the process. This paper shows briefly the challenges for industrial furnaces under VULKANO project focused on the development of five approaches from the point of view of efficiency, flexibility, reliability and safety: improving refractories, investigating new recovery systems based on PCM, using alternative fuels, integrating advanced monitoring and control devices and, finally, developing a holistic tool to help the operator to make decisions.
    [Show full text]
  • Heat Transfer in Industrial Combustion
    HEAT TRANSFER IN INDUSTRIAL COMBUSTION Charles E. Baukal, Jr. CRC Press Boca Raton New York © 2000 by CRC Press LLC Library of Congress Cataloging-in-Publication Data Baukal, Charles E. Heat transfer in industrial combustion / Charles E. Baukal, Jr. p. cm. Includes bibliographical references and index. ISBN 0-8493-1699-5 (alk. paper) 1. Heat--Transmission. 2. Combustion engineering. I. Title TJ260.B359 2000 621.402′2--dc21 99-088045 This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming, and recording, or by any information storage or retrieval system, without prior permission in writing from the publisher. All rights reserved. Authorization to photocopy items for internal or personal use, or the personal or internal use of specific clients, may be granted by CRC Press LLC, provided that $.50 per page photocopied is paid directly to Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923 USA. The fee code for users of the Transactional Reporting Service is ISBN 0-8493-1699-5/00/$0.00+$.50. The fee is subject to change without notice. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged.
    [Show full text]
  • Optimization of Wall Thickness for Minimum Heat Losses for Induction Furnace
    International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 10, Number 1 (2017) © International Research Publication House http://www.irphouse.com Optimization of Wall Thickness for Minimum Heat Losses for Induction Furnace Nilesh T. Mohite1, Ravindra G. Benni2 1Assistant professor, 2 Associate professor Mechanical Engg., department, D.Y.Patil college of engg.,& Technology, Kolhapur. Maharashtra, India, Amit A. Desai3, Amol V.Patil4 3,4 Assistant professor, Mechanical Engg., department, Bharti Vidyapeeth’s college of engg.,& Technology, Kolhapur. Maharashtra, India, Abstract electromagnetic and heat transfer equations, can be of great help for a more in depth understanding of occurring physical This paper focuses on the issue of optimum wall thickness phenomena. So far, various numerical models have been for minimum heat losses through the walls of induction developed coupling electromagnetism and heat transfer. furnace. Three ramming masses viz. Alumina, Magnesia and Most models involve the well-known finite element Zirconia are used. This analysis is carried out in Ansys approach or mixed finite element and boundary element Workbench software and the results are compared with the approaches. [8] analytical results. From the result, we can reduce 48% losses from properties optimization and 64 % by geometrical optimization. Optimum geometry and properties of ramming mass can reduce total 60% losses with optimum thickness and properties of material of induction furnace. Keywords: Optimization, induction furnace Introduction Induction heating processes have become increasingly used in these last years in industry. The main advantages of using these processes when compared to any other heating process (gas furnace.) are, among others, their fast heating rate, good reproducibility and low energy consumption.
    [Show full text]
  • Development of a Numerical Model for the Heat and Mass Transport in an Electric Arc Furnace Freeboard”
    “Development of a Numerical Model for the Heat and Mass Transport in an Electric Arc Furnace Freeboard” From the Faculty of Georesources and Materials Engineering of the RWTH Aachen University Submitted by Dipl- Ing. Jacqueline Christina Gruber from Johannesburg, South Africa in respect of the academic degree of Doctor of Engineering approved thesis Advisors: Univ.-Prof. Dr.-Ing. Herbert Pfeifer Prof. Dr.-Ing. Klaus Krüger PD Dr. rer. nat. M. Kirschen Date of the oral examination: 09.12.2015 This thesis is available in electronic format on the university library’s website Jaqueline Christina Gruber Development of a Numerical Model for the Heat and Mass Transport in an Electric Arc Furnace Freeboard ISBN: 978-3-95886-087-2 1. Auflage 2016 Bibliografische Information der Deutschen Bibliothek Die Deutsche Bibliothek verzeichnet diese Publikation in der Deutschen Nationalbibliografie; detaillierte bibliografische Da- ten sind im Internet über http://dnb.ddb.de abrufbar. Das Werk einschließlich seiner Teile ist urheberrechtlich geschützt. Jede Verwendung ist ohne die Zustimmung des Herausgebers außerhalb der engen Grenzen des Urhebergesetzes unzulässig und strafbar. Das gilt insbesondere für Vervielfältigungen, Übersetzungen, Mikroverfilmungen und die Einspeicherung und Verarbeitung in elektronischen Systemen. Vertrieb: 1. Auflage 2016 © Verlagshaus Mainz GmbH Aachen Süsterfeldstr. 83, 52072 Aachen Tel. 0241/87 34 34 Fax 0241/87 55 77 www.Verlag-Mainz.de Herstellung: Druck und Verlagshaus Mainz GmbH Aachen Süsterfeldstraße 83 52072 Aachen Tel. 0241/87 34 34 Fax 0241/87 55 77 www.DruckereiMainz.de Satz: nach Druckvorlage des Autors Umschlaggestaltung: Druckerei Mainz printed in Germany D 82 (Diss. RWTH Aachen University, 2015) Acknowledgements This thesis was created during my time as a research associate at the Department of Industrial Furnaces and Heat Engineering (IOB) of the RWTH Aachen University in Germany.
    [Show full text]
  • Refractories for Industrial Processing: Opportunities for Improved Energy Efficiency
    The photographs on the cover are an example of an aluminum furnace featured on the Harbison Walker web page (top), cathodoluminescence of a fusion-cast spinel refractory (center), and cathodoluminescence of a fusion-cast alumina refractory (bottom). 1 Refractories for Industrial Processing: Opportunities for Improved Energy Efficiency James G. Hemrick,* H. Wayne Hayden,† Peter Angelini,* Robert E. Moore,§ and William L. Headrick§ *Oak Ridge National Laboratory †Metals Manufacture, Process, and Controls Technology, Inc. §R. E. Moore and Associates January 2005 Prepared for the DOE-EERE Industrial Technologies Program Table of Contents List of Figures and Tables ............................................................................................................... v Executive Summary ...................................................................................................................... vii Abbreviations and Acronyms......................................................................................................... ix 1. Introduction............................................................................................................................. 1 2. Current Refractory Status .......................................................................................................1 2.1 Usage in Industry......................................................................................................... 4 2.2 Current R&D Status....................................................................................................
    [Show full text]
  • Iron and Steel Industry
    Office of Air and Radiation September 2012 AVAILABLE AND EMERGING TECHNOLOGIES FOR REDUCING GREENHOUSE GAS EMISSIONS FROM THE IRON AND STEEL INDUSTRY Available and Emerging Technologies for Reducing Greenhouse Gas Emissions from the Iron and Steel Industry Prepared by the Sector Policies and Programs Division Office of Air Quality Planning and Standards U.S. Environmental Protection Agency Research Triangle Park, North Carolina 27711 September 2012 Table of Contents Tables .............................................................................................................................................. v Figures............................................................................................................................................ vi Abbreviations and Acronyms ....................................................................................................... vii EPA Contact................................................................................................................................... ix I. Introduction ................................................................................................................................. 1 II. Purpose of this Document .......................................................................................................... 1 III. Organization of This Document................................................................................................ 1 IV. Description of the Iron and Steel Industry ...............................................................................
    [Show full text]
  • 2. Energy Performance Assessment of Furnaces
    2. ENERGY PERFORMANCE ASSESSMENT OF FURNACES 2.1 Industrial Heating Furnaces Furnace is by definition a device for heating materials and therefore a user of energy. Heating furnaces can be divided into batch-type (Job at stationary position) and continuous type (large volume of work output at regular intervals). The types of batch furnace include box, bogie, cover, etc. For mass production, continuous furnaces are used in general. The types of continu- ous furnaces include pusher-type furnace (Figure 2.1), walking hearth-type furnace, rotary hearth and walking beam-type furnace.(Figure 2.2) The primary energy required for reheating / heat treatment (say annealing) furnaces are in the form of Furnace oil, LSHS, LDO or electricity Figure 2.1: Pusher-Type 3-Zone Reheating Furnace Figure 2.2: Walking Beam-Type Reheating Furnace 2.2 Purpose of the Performance Test To find out the efficiency of the furnace To find out the Specific energy consumption The purpose of the performance test is to determine efficiency of the furnace and specific energy consumption for comparing with design values or best practice norms. There are many factors affecting furnace performance such as capacity utilization of furnaces, excess air ratio, final heating temperature etc. It is the key for assessing current level of performances and find- ing the scope for improvements and productivity. Heat Balance of a Furnace Heat balance helps us to numerically understand the present heat loss and efficiency and improve the furnace operation using these data. Thus, preparation of heat balance is a pre-requirement for assessing energy conservation potential.
    [Show full text]
  • Burning of Hazardous Waste in Boilers and Industrial Furnaces
    This information is reproduced with permission from HeinOnline, under contract to EPA. By including this material, EPA does not endorse HeinOnline. 7134 Federal Register / Vol. 56, No. 35 / Thursday, February 21, 1991 / Rules and Regulations ENVIRONMENTAL PROTECTION of the Federal Register as of August 21, D. Land Disposal Restriction Standards. AGENCY 1991. Part Two: Devices Subject to Regulation 40 CFR Parts 260, 261, 264, 265, 266, ADDRESSES: The official record for this I. Boilers. rulemaking is identified as Docket I1.Industrial Furnaces. 270, and 271 Numbers F-87-BBFP-FFFFF and F-89- A. Cement Kilns. BBSP-FFFFF, and is located in the EPA B. Light-Weight Aggregate Kilns. Acid Furnaces. [EPA/OSW-FR-91-012; SWH-FRL-3865-61 RCRA Docket, roont 2427, C. Halogen 401 M Street 1. Current Practices. RIN 2050-AA72 SW., Washington, DC 20460. The docket 2. Designation of HAFs as Industrial is available Burning of Hazardous for inspection from 9 a.m. to Furnaces. Waste In Boilers and 4 p.m., Industrial Furnaces Monday through Friday, except D. Smelting, Melting, and Refining on Federal holidays. The public must Furnaces Burning Hazardous Waste to AGENCY: Environmental Protection make an appointment tc review docket Recover Metals. Agency (EPA). materials by calling (202) 475-9327. The Part Three: Standards for Boilers and ACTION: Final rule. public may copy up to 100 pages from Industrial Furnaces Burning Hazardous the docket at no charge. Additional Waste SUMMARY: Under this final rule, the copies cost $.15 per page. I. Emission Standard for Particulate Matter. Environmental Protection Agency (EPA] A. Basis for Final Rule.
    [Show full text]
  • Melting Furnaces
    Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, make any warranty, express or implied, or assume any legal liability OF responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use would not infringe 'I privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government, any agency thereof, or *, any of their contractors or subcontractors. The views and opinions expressed herein do not necessarily state or reflect those of the United States Government, any agency thereof, or any of their contractors. Printed in the United States of America. This report has been reproduced directly from the best available COPY. Available to DOE and DOE contractors from US. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831 Telephone: (865)576-8401 Facsimile: (865)576-5728 E-Mail: rePorts@,adonis.osti.gov Online ordering: h ttu://www .doc.eovibridae Available to the public from U.S. Department of Commerce National Technical Information Service 5285 Port Royal Rd Springfield, VA 22 161 Telephone: (800)553-6847 Facsimile: (703)605-6900 E-Mail: orders~!ntis.fedworld.eov Online order: l~tt~:l~www.n~is.~ov/hcl~/ordcr1netl~ods.as~?loc=7-~-O~o1~~1i~~ SAND2005-1 196 Unlimited Release Printed February 2005 Development of Models and Online Diagnostic Monitors of the High- Temperature Corrosion of Refractories in Oxy/Fuel Glass Furnaces Final Project Report Mark D.
    [Show full text]