DOCSLIB.ORG

Issue 2004/2005 the Company Legislation for the Protection of the When Too Much Oil Is Used on the Environment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Issue 2004/2005 the Company Legislation for the Protection of the When Too Much Oil Is Used on the Environment Issue 2004/2005 The company legislation for the protection of the when too much oil is used on the environment. Whilst such measures are surface of the shuttering. Further Gebr. Seifert was established in 1906 as a followed to ensure compliance, the company causes are poor cleaning of the manufacturing company for industrial and goes further in that it attempts, whenever concrete surface and improper use construction products. The firm took part in possible, to minimise waste, to recycle and of primer when painting. We the rapid development of the construction reuse materials, and to adopt a ”good recommend that individual tests be industry and was the biggest and preferred neighbours” policy towards adjoining carried out. supplier for most contractors. Seifert has properties. Seifert has a fully equipped and become a manufacturer of innovative and high quality competitive construction dynamic tooling department, which Regional coverage allows us to produce custom items products and systems. We are an international company committed to top of Decades of international experience have according to your requirements. the range products and customer service, helped Seifert to build an impressive sales Please contact us for further information. and have operated according to DIN ISO network in many regions of the world. This 9000 standards from the very beginning. network, which can be viewed in the internet Seifert spacers have been used Top management has introduced action at www.seifert.de, has been levered into without complaint in all extreme plans for the firm’s various activities. regional organisations, directly accountable climatic areas of the world. to the customers they serve and completely Seifert is well equipped to tackle the focussed on delivering superior value. The minimum delivery quantity is tremendous growth in the construction one packing unit per size. All weights sector. Since our first project, we have mentioned are per 100 pcs or 100 supplied many billions of rebar spacers to Spacers metres unless otherwise stated. companies all over the world. Developments When left in the sun or in bright The terms and conditions of sale, as in the construction industry mean that the daylight for prolonged periods of company’s structure has changed, and this stated on page 55, are valid at all time, plastic spacers and bags may times. will also lead to further geographical become brittle. Please ensure that expansion. the goods are stored either under a roof or covered from direct sunlight. Copyright © 2004 People behind the company The material used to manufacture At Seifert we are aware that our employees spacers is usually PE. This type of Gebr. Seifert GmbH & Co. are our most valuable resource. In order to plastic is physiologically safe and Klagebach 90, 58579 Schalksmühle cope with the company’s growing resistant against all acids and Germany operational and technical needs, we alkaline solutions used in the constantly upgrade the essential job skills of construction industry. our employees. The company’s policy is to Any reproduction in whole or in part, Spacers are available in all colours create staff training and development in any form by any means, electronic or other than the standard grey for an activities in all areas to ensure optimal work mechanical, or by an information storage additional charge. The minimum performance. Our personnel enjoy a safe and retrieval system without prior written charge is €100,-. Please enquire and motivating working environment. Seifert consent from Seifert is strictly prohibited. separately to obtain a specific uses strict safety standards and provides quotation. The information contained in this brochure is excellent welfare benefits. considered accurate. No warranty, however, The use of plastic spacers in case of is expressed or implied regarding it’s A convincing company fire has been confirmed as harmless accuracy or the results to be obtained from by the Institute for Building the use thereof. The user shall determine Our position as market leader is based on Technology in Berlin. ”There are no the suitability of a product prior to its use, for manufacturing high quality products at contrary thoughts about the use of the intended application and assume all risk competitive prices. Flexibility, dynamism and plastic spacers in concrete, and liability in connection therewith. reliability are at the heart of our company reinforced concrete and tensioned philosophy. We constantly improve our concrete with regard to fire hazard, Whilst all due care and attention has been performance by including our employees in as long as the plastic used is not made to maintain the correctness of this new developments, encouraging their input Polyvinylchloride (PVC).” German brochure, due to product developments it by means of quality assurance circles and Concrete Association 1997. In case may occur that some of the data included is forming independent production groups. of fire, a plastic spacer merely melts. no longer valid. Should you wish to assure Zero fault strategy, preventive fault analysis, The plastic spacers have no effect on yourself, or merely exchange your thoughts statistical process control, traceability of all the fire resistance. with us please contact us. procedures and activities, and regular self- auditing are the instruments we use to achieve our company goals. Close co- operation and partnership with our suppliers helps them and us to improve our performance, and to offer our customers continued value. The creativity and Spacers competence of our employees, customers and suppliers is reflected in our performance Under certain conditions small and our high quality products. ruptures may occur in the Seifert and the environment manufacture of façades, on the surface of the concrete. These Seifert fully recognises the importance of ruptures are in the vicinity of the ensuring full compliance with all the relevant spacers used, and occur in particular 2 Seifert about Seifert A strong programme Spacers for top and bottom reinforcement Page 6 - 10 Spacers for horizontal and vertical reinforcement Page 11 - 20 Wet cast and fibrous concrete spacers Page 21 - 23 Lifting, fixing and connecting precast concrete components Page 24 - 31 Waterstop and sealant Page 32 - 33 Formwork accessories Page 34 - 35 Wall spacers Page 36 - 40 Magnetic products Page 41 Chamfers and construction profiles Page 42 - 43 Accessories for precast concrete elements Page 44 - 49 Accessories Page 50 - 51 Alphabetical product index Alfafix 44 Fugenfix 43 Palfix 44 Sperrfix 37 Anchor nut 35 Hebefix 24 Panel pad 49 Spring clamp 35 Aquafix 37 Hexagon nut 35 Panel tie 50 Square shim 47 Autofix 19 H-Fix 11 Picofix 18 Starfix 6 Backup rod 33 High cross chairs 9 Planfix screed chair 50 Steel chamfer 42 Betofix 23 Hollow wall anchor 38 Plate rib washer 34 Stoppers 36 Bindefix 45 Hollow wall spacer 40 Plattenfix 51 Stuelpfix 37 Centerfix 51 Horseshoe shim 47 Polyfix 12 Styrofix 16 Clampfix 14 Hydrofix 33 PP-Lifting loops 25 Telefix 13 Clipfix 39 Isofix 33 Praktifix 11 T-Fix 43 Concrete chamfer 22 Jointfix 32 Praktifix vertical 11 Thruty cone 36 Concrete snake 22 Kennfix 46 Praxifix 8 Thruty sleeve 36 Concrete square bar 22 Klemmfix 18 Pressfix 50 Tilefix 51 Confix 30 L-Fix 11 Primafix 13 Tilt-up-Fix 29 Conterfix 37 Liftfix 29 Propfix 28 Tipfix 15 Corner guard 49 Lifting loops 25 PVC chamfer 42 Topfix 6 Counter plate 34 Lifting sockets 24 Quadrofix 16 Topfix-K 6 Crimped fixing sockets 26 Loop tie 45 Quickfix 44 Transfix 24 Cross chairs 9 Magnetic block 41 Railfix 31 Trapezfix 43 Crossfix 44 Magnetic chamfer 41 Rebar cap 48 Triple cover spacer 21 Distafix 48 Magnetic plate 41 Ringfix 12 Tying wire 45 Double cover spacer 21 Magnetic profile 41 Rocketfix 40 Typofix 46 Drifix 17 Magnetic rod 41 Rondofix 12 U-Fix 10 Drip mould 43 Mattenfix 11 Rotafix-K 44 Ultrafix 18 Drip washer 50 Maxifix 14 Safetyfix 50 Unifix 15 Duofix 39 Mini corner guard 49 Sand plates 9 Vertifix 38 Eco shim 47 Minifix 17 Schalfix round 38 V-Fix 10 Econofix 14 Multifix 14 Schalfix-K 38 Wandfix 37 Edge guard 49 Nailing plate 27 Semifix 12 Water barrier 34 Edgefix 42 Normfix 15 Single cover spacer 21 Waved end insert 25 Extrafix 20 Nutfix 51 Snap off fixing plug 27 Wedge 45 Fixing dowels 26 Obenfixer 6 Snapfix 15 Wing nut 35 Fixing plate 27 Optifix 28 Sofix-K 23 Zettfix 7 Fixing sockets 26 Optifix-HW 28 Sofix-KF 23 Zettfix-H 7 Form tie rod 34 Packfix strip 45 Sofix-Q 23 Formwork clamp 35 Packfix-K 45 Sparfix 18 The programme 3 Picture Index Spacers for top and bottom reinforcement 6-7 8-10 Spacers for horizontal and vertical reinforcement 11-13 14-16 17-19 20 Wet cast and fibre reinforced concrete spacers 21-23 Lifting, fixing and connecting precast concrete 24-26 27-28 29-31 4 The programme Picture Index Waterstop and sealant 32-33 Formwork accessories 34-35 Wall spacers 36-37 38-40 Magnetic products 41 Chamfers and construction profiles 42-43 Accessories for precast concrete elements 44-45 46-47 48-49 Accessories 50-51 The programme 5 Starfix and Topfix individual hystools Steel hystools manufactured from 6 mm hard drawn wire to support top reinforcement in ground floor slabs, mainly used where there is particularly heavy loads or excessive site traffic. Hystools are freestanding and easy to position. Topfix TC hystools have plastic coated feet and Starfix SF and Topfix TF have 14 mm Ø plastic caps fitted to eliminate any danger of rust staining. Supported area with Starfix 41 cm Ø and with Topfix 30 cm Ø. Other sizes are available upon
Load more

Recommended publications
  • D3.2 Dragados
    This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 653789. Coordinated and Support Project (CSA) Call: H2020-MG-2014_SingleStage_B Topic: MG-8.1b-2014 REthinking Future Infrastructure NETworks REFINET Project Duration: 2015.05.01 – 2017.04.30 Grant Agreement number: 653789 Coordinated and Support Project WP3 D3.2 DRAGADOS Best practices in design, construction and maintenance of transport infrastructures Submission Date: 03.07.2017 Due Date: 30.04.2016 Dissemination Level PU PP RE CO Project Coordinator: Alain ZARLI (CSTB) Tel: +33 493 95 67 36 Fax: +33 493 95 67 33 E mail: [email protected] Project website address: www.refinet.eu REFINET 2 D3.2 – Best practices in design, building and maintenance of transport infrastructures REVISION HISTORY Date Version Author/Contributor1 Revision By2 Comments 11.04.2016 V01 DRAGADOS, M. Segarra / First draft upon request of the REFINET Partners/ P.O. ENCORD members / ECTP members / NTPs members 06.05.2016 V1 DRAGADOS, M. Segarra, Final version of the document. P. Delgado / REFINET Submitted deliverable. Partners/ ENCORD members / ECTP members / NTPs members 03.07.2017 V2 DRAGADOS Miguel SEGARRA Final version submited to EC/INEA with changes linked to publication on CORDIS (EU emblem, disclaimer). Disclaimer The information in this document is provided as is and no guarantee or warranty is given that the information is fit for any particular purpose. The user thereof uses the information at its sole risk and liability. The document reflects only the author's view and the INEA and the European Commission are not responsible for any use that may be made of the information it contains.
    [Show full text]
  • Forming Accessories Handbook Concrete Construction Products
    BUILDING STRENGTH™ FORMING ACCESSORIES HANDBOOK CONCRETE CONSTRUCTION PRODUCTS Table of Contents General and Technical Information.............. 1 Medium/Heavy Forming ............................47 General Slabwork .......................................77 Definitions ....................................................................... 1 B1 Two Strut Coil Tie and B2 Four Strut Coil Tie ......... 47 C1B and C1C Wedge Hangers .....................................77 Safety Notes and Product Application ........................ 1 B1B3 and B2B3 Screw-On Coil Tie .......................... 48 C2 Coil Hanger Saddle Type ...................................... 78 Dayton Superior Technical Services ......................... 1 Coils ............................................................................... 49 C3 Coil Half Hanger .................................................... 79 Usage Affecting a Product’s Safe Working Load .............2 B6 Welding Coil Tie ..................................................... 49 C13 Plate Saddle Hanger ............................................ 79 Induced Tension Loads ................................................. 6 B7 and B22 Inserts (Crimp) ...................................... 49 C13A All-Wire Saddle Hanger ...................................80 Induced Shear Loads .................................................... 6 B11 Flat Washers ..........................................................50 C14 Channel Hanger.....................................................81 Combined Shear and
    [Show full text]
  • Technical Information Schöck Combar® December 2015
    Technical Information Schöck Combar® December 2015 Technical project service Tel. +49 7223 967-449 Fax +49 7223 967-490 [email protected] Planning tools – downloads and requests Tel. +49 7223 967-449 Fax +49 7223 967-490 [email protected] www.schoeck-Combar.com This technical information does not apply to projects in Germany, the Netherlands and Canada. For applications in these countries please refer to the local technical informations Schöck Combar®. The design values and recommendations provided in this technical information represent the best of our knowledge at the time of publication. They are based on international certifications (Germany, The Netherlands) and compliance reports (ISIS Canada, CSA S807, ACI440.3R) as well as on the results of extensive research and testing. They are intended to provide the planner and the designing engineer with a better understanding of Schöck Combar®. The information provided in this technical information in no way releases the designing engineer of his duties and responsibilities. It can not replace commonly accepted engineering rules and regulations. ! 2 Schöck Combar® Table of contents Page Fibre reinforced composite 4 All types at a glance 5 Product description 6 Product data sheet 7 Combar® Bent bars and stirrups 8 - 9 Bar end heads 10 - 11 Dowels 12 Certifications and test reports 13 Storage, transport and machining 14 Applications 15 Tensile strength and modulus of elasticity 16 Durability, characteristic value of the tensile stragth 17 - 18 Bond behavior 19 - 20 Crack width 21 - 22 Deflection
    [Show full text]
  • Hebel Slab Panel Autoclaved Aerated Concrete
    Technical Sheet and Installation Guide Hebel® Slab Panel Autoclaved Aerated Concrete German Technology About Hebel® Hebel® is a registered trademark of Xella Hebel® is committed to providing to the stages, in order to guarantee the best Group, a German technology. In the USA, United States with environmentally quality for our customers. we are now part of Bexel International responsible building solutions that Group, manufacturing Autoclaved conserve material an energy usage. We Its properties take any project to a higher Aerated Concrete products, following the are members ot the Green Building category, managing to build a better highest quality standards of the industry. Council. quality life, comfort and savings for a Hebel® offers the most efficient solution lifetime. At Hebel® we care to offer a full in construction systems, more than 80 Hebel® Autoclaved Aerated Concrete experience with a 360 service for each years in the market support us. We have offers to contractors with strong, project specification. been present in America since 1994. easy-to-install blocks and reinforced panels that are one-third the weight of The Hebel® Plant is located in Nuevo Hebel® is distinguish by being a traditional concrete and replace León, México and its USA offices are high-quality, innovative option that traditional multi step construction located in San Antonio, TX., from where combines various properties in a single processes. we serve the USA market. material. The benefits are reflected from the construction phase, it is up to 5 times Our building systems offer low insurance lighter than traditional concrete, and has and maintenance cost to the building a significant impact on reducing owner.
    [Show full text]
  • ICKTCM130635 경부고속철도 제7-1공구 노반신설 기타공사 공사시방서(영문) 05장(강재구)(권순천).Hwp
    OO High Speed Railway Lot No.O-1 Roadbed Construction PJ Specification - Tunnelling Works OO고속철도 제O-1공구 노반신설 건설공사 공사시방서 - 터널공 1997. 05 - Contents - 1. General 2. Construction survey 3. Rock classification and application of standard section 4. Excavation and mucking 5. Support 6. Steel form work 7. Concrete lining 8. Backfill insert 9. Waterproof and drainage 10. Waterproofing for the open cut type of tunnel 11. Entrance 12. Monitoring 13. Safety and sanitation 14. Chemical grouting 15. Grouting for tunnel reinforcement (Special chemical grouting by polymer urethane) 16. Temporary electric work 제 공 처 국토교통부 출 처 Korea High Speed Rail Construction Authority 1. General 1.1 Application (1) This Specification shows the general standards for tunneling work to be executed by NATM for Seoul-Pusan High speed Railway Construction section. (2) This specification is applicable to construction management and monitoring for NATM. (3) For aspects which are not specified in this specification, the Standard Specification by OHRC and the Standard Specification for Tunnel Construction by Ministry of Construction and Transportation shall be applied. 1.2 Work plan (1) The Contractor shall make a work implementation plan and a work procedure of the specifications according to b, para 6, Chapt. 1 and d, para 3, Chapt 8 of the specifications and proceed to work after the Supervisor's approval. (2) Construction scope and duration and local features and the foundation condition shall be considered in making a work execution plan, and environmental pollution and traffic problem shall be minimized. (3) Cycle time for excavation and auxiliary construction method shall be reviewed in making the work plan.
    [Show full text]
  • Concrete Forming Accessories PRODUCT HANDBOOK
    CONCRETE FORMING AccESSORIES PRODUCT HANDBOOK ® PROUDLY MADE IN AMERICA DAYTONSUPERIOR.COM Index ® Product Page Product .......................................................................Page Adjustable Coil Bolt ......................................................... 55 Jahn “A” Bracket .................................................................... 32 Adjustable Kicker ............................................................. 27 Jahn “C” Bracket .................................................................... 33 All-Wire Saddle Hanger ................................................... 84 Jahn Cornerlock .................................................................... 33 Anchor Bolt Sleeve ....................................................46, 65 Jahn Scaffold Jack................................................................. 34 Bag Ties .......................................................................... 74 Joist Type A Adjustable Screed Base ................................... 87 Base Tie .......................................................................... 29 Krueper Taper Tie .................................................................. 70 Information Technical and General Batter Washer .................................................................. 63 Load Key Joint ....................................................................... 92 Bolt Clamp ....................................................................... 46 Loop Panel Tie, Standard and Heavy ..................................
    [Show full text]
  • University of Cincinnati
    UNIVERSITY OF CINCINNATI Date:___________________ I, _________________________________________________________, hereby submit this work as part of the requirements for the degree of: in: It is entitled: This work and its defense approved by: Chair: _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ Architecture Built to Last: The Timelessness of Brick A thesis submitted to the Division of Research and Advanced Studies of the University of Cincinnati in partial fulfillment of the requirements for the degree of MASTER OF ARCHITECTURE in the Department of Architecture of the College of Design, Architecture, Art and Planning 2005 by Stephanie A. Kroger B.S. Arch., University of Cincinnati, 2003 Committee Chairs: Robert Burnham Barry Stedman Abstract Brick is one of the most culturally significant consequences as well. Technology has changed the way contemporary building materials, with a rich history of buildings are designed and constructed, directly use throughout human history. Its social meaning has benefiting issues of economy and sustainability, but often changed over the past decades and centuries, but brick compromising human scale. has always been valued not only for its durability, In today’s design and construction practices, brick quality, and tradition, but also for its human properties – is often reduced to simply a cladding material, wasting the direct human effort required to construct a brick wall much of its potential. Through the design of a non- is apparent in every unit and joint. The versatility that is denominational chapel, a building will be created that possible through brick’s simplicity of geometry allows exploits the inherent human scale, craft, durability and for the creation of an endless variety of forms and tradition of brick, while meeting the contemporary textures in architecture.
    [Show full text]
  • Paper Title (Use Style: Paper Title)
    Vol. 01, No. 01, pp. 01 –06 (2020) ISSN: 2709-6904 JOURNAL OF CIVIL ENGINEERING FRONTIERS www.jocivilef.org The Investigation of The Different Types of the Ground Rebar Spacers with Proposing New Design Rebar Space Mixed of Concrete Palstic Sevar Neamat1, *, Mahmood Shamsborhan2 1 Dept. of Mechanical Engineering, College of Engineering, University of Zakho, Kurdistan Region-Iraq [email protected] 2 Dept. of Mechanical Engineering, College of Engineering, University of Zakho, Kurdistan Region-Iraq [email protected] Abstract The reinforcing spacers are commonly prepared from cementitious material, plastic or metals. These spacers are prepared to provide the reinforcing steel with ensuring that the requested concrete cover thickness is attained to guard surrounded steel from corrosion. Also, they pretend a vital role in the concrete structure performance. The toughness of reinforced concrete buildings remains extremely reliant on the features of the protection of concrete to be strong with thickness. A disappointment in finding cover thickness is considered the main impact on early deterioration within the steel, whichever in chance is a chief weaken method in reinforcing concrete constructions. The specified study offerings a review study on the investigation of the advantages and disadvantages of six factors in various types concerning the ground rebar spacers studies. As a result, different types of ground rebar spacers have been compared and the new rebar spacer has been designed mixed of concrete_ plastic material Keywords: Rebar spacer, concrete-plastic rebar spacer, ground spacer, new design of rebar spacer Received: May 05 2020 / Accepted: July 07 2020 / Online: July 22 2020 I.
    [Show full text]
  • Bridge Deck Forming Manual Gamcotm
    BRIDGE DECK FORMING MANUAL GAMCOTM TM FORMING - SHORING - FABRICATION - ENGINEERING WWW.GAMCOFORM.COM George A. More Gamco’s Founder AŌer graduaƟng from the University of Wisconsin with an emphasis in Math and Engi- neering, George began his career in the construcƟon industry with the Symons Corpo- raƟon in Des Plaines, Illinois. AŌer two years he was one of the top salesmen. He quickly moved up the corporate ladder to become assistant manager of the CincinnaƟ branch in 1970 and manager in 1973. George was instrumental in the CincinnaƟ branch becoming one of the top producers in the country. In 1977 George’s creaƟvity and innova- Ɵons in the industry led him to start his own business with his wife Sally - Gamco Concrete Forms & Accessories. AŌer compleƟng college, his two sons Brian and Mike joined forces with him in the early 1990’s and have been here ever since. Gamco today conƟnues in George’s tradiƟon of strong customer service, innovaƟve ideas and engineering. We have expanded our manufacturing capabiliƟes and naƟonal pres- ence in the bridge, parking garage, shoring and infrastructure industries. GAMCOTM GENERAL AND TECHNICAL INFORMATION GAMCOFORM.COM SAFETY TM SAFETY Gamco Bridge Deck forming products are designed and intended for use by experienced, qualified professionals only. Lack of supervision by a qualified person, or misuse can lead to accidents resulting in property damage or serious bodily injury or death. The contractor must evaluate the application of Gamco products to ensure that they are being used within their safe working load (SWL) given an appropriate factor of safety (FS) based upon jobsite conditions.
    [Show full text]
  • Pre-Set Anchors Railings High Mast Overhead Signs
    Concrete Forming Systems Bridge Deck Forming and Hanging Systems Reinforcing Bar Supports Precast Concrete Products Rock Anchoring and Bolt Systems CONCRETE PRE-SET ANCHORS RAILINGS ANCHORING HIGH MAST SYSTEMS OVERHEAD SIGNS 1 TABLE OF CONTENTS Table of Contents M V PRE-SET ANCHORS FOR LIGHT & FLAG POLES Foundation Design.................................................32 B.C.D. Pre-Set Anchor System............................................4 Test Results...........................................................34 N.A. FIGURE 2 ANCHOR CONFIGURATION Pre-Set Anchor - Light Poles...................................6 CRANE & ANCHOR BOLTS 5000 mm (16'-4 3/4") Typical Light Poles Installation..................................7 Crane Bolts............................................................37 2 ROUND WASHERS AND 2 HEX NUTS PER STUD HI-TENSILE BOLT OR AND ROUND WASHER FERRULE OR COIL 11000 mm (36'-1") C Light Pole Anchor Ordering Information.....................8 Anchor Bolts..........................................................38 Pre-Set Anchor Design............................................9 Crimped Anchor.....................................................39 4 - A325 BOLTS (MIN.) MOMENT SHEAR 120 (88.8) Anchor Type: DGR-1TM Strut Material: C-1030 C Bored Concrete Pile Diameter: 600 mm (24") 110 Min. Bolt Size: 20 mm (3/4") (81.4) AllowableForces Lateral From Specified Load.....................................10 Hook Anchor Bolt...................................................39 Soil Pressure: 67 kPa (1400 psf) 100 (74.0)
    [Show full text]
  • Effect of Mortar Spacers of Different Grades on the Performance of Concrete
    EFFECT OF MORTAR SPACERS OF DIFFERENT GRADES ON THE PERFORMANCE OF CONCRETE MOHAMED ALI MOHAMOUD A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering (Structures) Faculty of Civil Engineering Universiti Teknologi Malaysia JANUARY 2017 iii This project report is dedicated to my beloved family; Father, Mother, Siblings and Relatives. iv ACKNOWLEDGEMENT In the name of Allah, the Most Gracious, and Most Merciful. Praise be to Allah S. W. T, Peace and blessings of Allah be upon His Messenger, Muhammed S.A.W, and all his family and companions. I would like to express my sincere appreciation to my supervisor, Associate Professor Dr. Abdul Rahman Mohd. Sam for his encouragement, guidance, critics, friendship and help during the development of this project. Thanks to all other lecturers for helping me either directly or indirectly in the completion of this report project. My special appreciation goes to my father, my mother and siblings, whom their love and care have brought me to this level. Their substantial encouragements and support have helped me to succeed in finishing my program here at Universiti Teknologi Malaysia. Last but not least, I would like to express gratitude to my colleagues and seniors their help is really appreciated and will be remembered forever. Also, I would like to thank the staff of Structure and Materials Laboratory, Faculty of Civil Engineering, University Teknologi Malaysia for their assistance in the experimental works. v ABSTRACT Rebar spacers are crucial component in reinforced concrete structures. Their purpose is to provide and maintain cover for the reinforcement bars.
    [Show full text]
  • Ican 2017 OFFICIAL CATALOGUE - EVENT DIRECTORY
    iCAN 2017 OFFICIAL CATALOGUE - EVENT DIRECTORY - The 2nd International Invention Innovation Competition in Canada, iCAN 2017 [PAGE 0] THE ORGANIZER TISIAS is the representative inventors’ organization in Canada for promoting North American innovations around the world through international invention shows, fairs, and student competitions in Asia and Europe. Established in 2013, TISIAS has been participating in more than 30 international exhibition of inventions in 16 different countries to support creative works of students, individuals, and corporate inventors, entrepreneurs, and researchers from mainly Canada, USA and Korea – promoting their ideas to various global platforms for grasping worldwide opportunities for sales and marketing, scientific workshops, and award winning achievements. We continue to encourage everyone to create and succeed through innovation and creativity. THE EVENT The 2nd annual iCAN 2017 is to once again provide an invention exhibition platform in Canada for both local and overseas inventors, allowing them to showcase their inventions, innovative products, and scientific research projects. iCAN 2017 provides all-around program including the exhibition of inventions, informative seminars by IP experts and the awarding ceremony. The Preliminaries Applications: January 1 – July 30 Date: August 26, 2017 Anno uncement of Winners: July 1 – Aug 1 Final Round Exhibition, “Finalists Selected & Confirmed” Seminar & Award Ceremony The 2nd International Invention Innovation Competition in Canada, iCAN 2017 [PAGE 1] The 2nd International Invention Innovation Competition in Canada, iCAN 2017 [PAGE 2] ACKNOWLEDGEMENTS It is a great pleasure and honour to once again invite you all to the 2nd annual iCAN 2017 in Toronto. Over the past 8 months since the start of the Preliminaries Open, the organizing committee received more than 350 applications from 33 countries around the world.
    [Show full text]