DOCSLIB.ORG

Pricelist KINEX 01.01.2021

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pricelist KINEX 01.01.2021 Pricelist of Measuring Tools KINEX KINEX Measuring, Podnikatelská 586, 190 11 Praha 9, Czech Republic valid from 1.1.2021 CODE recommended prices for end users EUR 1001-02-030 Steel ruler with mm graduation KINEX 300 mm DIN 866/A 18,88 1001-02-050 Steel ruler with mm graduation KINEX 500 mm DIN 866/A 21,65 1001-02-100 Steel ruler with mm graduation KINEX 1000 mm DIN 866/A 42,12 1001-02-150 Steel ruler with mm graduation KINEX 1500 mm DIN 866/A 95,35 1001-02-200 Steel ruler with mm graduation KINEX 2000 mm DIN 866/A 138,92 1001-07-030 Stainless Steel Ruler, 300 mm, mm graduation KINEX, DIN 866/A 34,42 1001-07-050 Stainless Steel Ruler, 500 mm, mm graduation KINEX, DIN 866/A 37,65 1001-07-100 Stainless Steel Ruler, 1000 mm, mm graduation KINEX, DIN 866/A 79,31 1001-07-150 Stainless Steel Ruler, 1500 mm, mm graduation KINEX, DIN 866/A 147,31 1001-07-200 Stainless Steel Ruler, 2000 mm, mm graduation KINEX, DIN 866/A 258,96 1007-02-030 Steel Bevelled Ruler KINEX 300 mm, mm graduation, PN 25 1112 18,92 1007-02-050 Steel Bevelled Ruler KINEX 500 mm, mm graduation, PN 25 1112 22,58 1007-02-100 Steel Bevelled Ruler KINEX 1000 mm, mm graduation, PN 25 1112 41,23 1007-02-150 Steel Bevelled Ruler KINEX 1500 mm, mm graduation, PN 25 1112 79,62 1007-02-200 Steel Bevelled Ruler KINEX 2000 mm, mm graduation, PN 25 1112 114,96 1007-07-030 Stainless Steel Bevelled Ruler KINEX - 300 mm, mm graduation DIN 866/B 30,85 1007-07-050 Stainless Steel Bevelled Ruler KINEX - 500mm, mm graduation DIN 866/B 34,73 1007-07-100 Stainless Steel Bevelled Ruler KINEX - 1000mm, mm graduation DIN 866/B 69,31 1007-07-150 Stainless Steel Bevelled Ruler KINEX - 1500mm, mm graduation DIN 866/B 118,12 1007-07-200 Stainless Steel Bevelled Ruler KINEX - 2000mm, mm graduation DIN 866/B 171,31 1007-1 Aluminium Straight Edge 400mm 3,96 1008-1 Aluminium Straight Edge 600mm 5,88 1009-1 Aluminium Straight Edge 1000mm 9,00 1012-02-030 Steel ruler, mm graduation 300mm KINEX, DIN 866/B 15,54 1012-02-050 Steel ruler, mm graduation 500mm KINEX, DIN 866/B 19,19 1012-02-100 Steel ruler, mm graduation 1000mm KINEX, DIN 866/B 36,08 1012-02-150 Steel ruler, mm graduation 1500mm KINEX, DIN 866/B 52,19 1012-02-200 Steel ruler, mm graduation 2000mm KINEX, DIN 866/B 94,81 1012-02-250 Steel ruler, mm graduation 2500mm KINEX, DIN 866/B 145,65 1012-02-300 Steel ruler, mm graduation 3000mm KINEX, DIN 866/B 165,81 1012-02-400 Steel ruler, mm graduation 4000 mm KINEX, DIN 866/B 287,58 1012-02-500 Steel ruler, mm graduation 5000 mm KINEX, DIN 866/B 516,81 1012-04-030 Aluminium Ruler Non-magnetic Light KINEX BLACK COAT with mm graduation 300mm 10,12 1012-04-050 Aluminium Ruler Non-magnetic Light KINEX BLACK COAT with mm graduation 500mm 11,96 1012-04-100 Aluminium Ruler Non-magnetic Light KINEX BLACK COAT with mm graduation 1000mm 21,69 1012-07-024 Stainless Steel Ruler 24" with INCH graduation, laser marking, packed in PE bag 52,12 1012-07-030 Steel Ruler KINEX - Stainless Steel with mm graduation 300mm, DIN 866/B 21,58 1012-07-040 Stainless Steel Ruler 40" with INCH graduation, laser marking, packed in PE bag 80,38 1012-07-050 Steel Ruler KINEX - Stainless Steel with mm graduation 500mm, DIN 866/B 26,77 1012-07-100 Steel Ruler KINEX - Stainless Steel with mm graduation 1000mm, DIN 866/B 55,88 1012-07-150 Steel Ruler KINEX - Stainless Steel with mm graduation 1500mm, DIN 866/B 97,27 1012-07-200 Steel Ruler KINEX - Stainless Steel with mm graduation 2000mm, DIN 866/B 151,19 1012-07-250 Steel Ruler KINEX - Stainless Steel with mm graduation 2500mm, DIN 866/B 258,15 1012-07-300 Steel Ruler KINEX - Stainless Steel with mm graduation 3000mm, DIN 866/B 259,81 1012-07-400 Steel Ruler KINEX - Stainless Steel with mm graduation 4000mm, DIN 866/B 533,31 1012-07-500 Steel Ruler KINEX - Stainless Steel with mm graduation 5000mm, DIN 866/B 891,08 1017 Flexible Steel Ruler KINEX 300mm, mm graduation 1,54 1017-02-015 Flexible Steel Ruler KINEX BLACK COAT 150mm, mm graduation, EC I 2,77 1017-02-030 Flexible Steel Ruler KINEX BLACK COAT 300mm, mm graduation, EC I 2,54 1017-02-050 Flexible Steel Ruler KINEX BLACK COAT 500mm, mm graduation, EC I 3,96 1017-02-100 Flexible Steel Ruler KINEX BLACK COAT 1000mm, mm graduation, EC I 12,42 1017-02-150 Flexible Steel Ruler KINEX BLACK COAT 1500mm, mm graduation, EC I 26,00 e-mail: [email protected] E-shop of Measuring Tools KINEX web: https://www.kinexmeasuring.com/en/ https://shop.kinexmeasuring.com/en/ Pricelist of Measuring Tools KINEX KINEX Measuring, Podnikatelská 586, 190 11 Praha 9, Czech Republic valid from 1.1.2021 CODE recommended prices for end users EUR 1017-02-200 Flexible Steel Ruler KINEX BLACK COAT 2000mm, mm graduation, EC I 33,15 1017-05-015 Flexible Steel Ruler KINEX with mm graduation 150mm, TOP QUALITY, EC I 1,96 1017-05-030 Flexible Steel Ruler KINEX with mm graduation 300mm, TOP QUALITY, EC I 2,04 1017-05-050 Flexible Steel Ruler KINEX with mm graduation 500mm, TOP QUALITY, EC I 3,31 1017-05-100 Flexible Steel Ruler KINEX with mm graduation 1000mm, TOP QUALITY, EC I 10,92 1018 Flexible Steel Ruler KINEX 500mm, mm graduation 2,73 1019 Flexible Steel Ruler KINEX 1000mm, mm graduation 8,23 1020 Flexible Steel Ruler KINEX 1500mm, mm graduation 18,92 1021 Flexible Steel Ruler KINEX 2000mm, mm graduation 25,38 1022 Steel Thin Ruler KINEX 300mm 3,08 1022-0 Steel Thin Ruler KINEX 150mm with Conversation Table, INOX, Color Marking 1,88 1022-02-030 Steel Thin Ruler KINEX 300mm with Conversation Table, INOX, Color Marking 3,54 1022-02-050 Steel Thin Ruler KINEX 500mm with Conversation Table, INOX, Color Marking 5,81 1022-02-100 Steel Thin Ruler KINEX 1000mm with Conversation Table, INOX, Color Marking 19,15 1022-1 Steel Thin Ruler KINEX 200mm 2,19 1023 Steel Thin Ruler KINEX 500mm 5,04 1023-02-030 Steel Thin Ruler KINEX BLACK COAT 300mm, class 1 5,04 1023-02-050 Steel Thin Ruler KINEX BLACK COAT 500mm, class 1 8,27 1023-02-100 Steel Thin Ruler KINEX BLACK COAT 1000mm, class 1 20,31 1023-05-030 Steel Thin Ruler 300mm, laser marking (suitable for calibration) 4,00 1023-05-050 Steel Thin Ruler 500mm, laser marking (suitable for calibration) 7,23 1023-05-050P Steel Thin Ruler 500mm, scale from right to left, laser marking (suitable for calibration) 9,04 1023-05-100 Steel Thin Ruler 1000mm, laser marking (suitable for calibration) 16,12 1023-05-100P Steel Thin Ruler 1000mm, scale from right to left, laser marking (suitable for calibration) 21,15 1023-05-150 Steel Thin Ruler 1500mm, laser marking (suitable for calibration) 35,15 1023-05-200 Steel Thin Ruler 2000mm, laser marking (suitable for calibration) 50,31 1023-25-030 Steel Thin Ruler 300mm, laser marking (suitable for calibration), 0,5 mm 5,54 1023-25-050 Steel Thin Ruler 500mm, laser marking (suitable for calibration), 0,5 mm 9,50 1023-25-100 Steel Thin Ruler 1000mm, laser marking (suitable for calibration), 0,5 mm 21,15 1024 Steel Thin Ruler KINEX 1000mm 15,04 1025 Steel Thin Ruler KINEX 1500mm 31,96 1026 Steel Thin Ruler KINEX 2000mm 43,58 1027-07-050 Stainless Steel Ruler KINEX - vertical scale 500mm 40,35 1027-07-100 Stainless Steel Ruler KINEX - vertical scale 1000mm 69,65 1033-12-050 Precision Bridge Edge KINEX 500mm DIN 876 783,08 1033-12-075 Precision Bridge Edge KINEX 750mm DIN 876 882,08 1033-22-100 Precision Bridge Edge KINEX 1000mm DIN 876 1107,23 1033-22-150 Precision Bridge Edge KINEX 1500mm DIN 876 1509,46 1033-22-200 Precision Bridge Edge KINEX 2000mm DIN 876 2335,96 1038-02-050 Precision Straight Edge KINEX 500mm (for measuring flatness), DIN II 196,85 1038-02-100 Precision Straight Edge KINEX 1000mm (for measuring flatness), DIN II 327,12 1038-02-150 Precision Straight Edge KINEX 1500mm (for measuring flatness), DIN II 771,92 1039-02-050 Precision Straight Edge KINEX 500mm, DIN 874/0 65,31 1039-02-075 Precision Straight Edge KINEX 750mm, DIN 874/0 91,00 1039-02-100 Precision Straight Edge KINEX 1000mm, DIN 874/0 136,23 1039-02-150 Precision Straight Edge KINEX 1500mm, DIN 874/0 237,73 1039-02-200 Precision Straight Edge KINEX 2000mm, DIN 874/0 432,58 1039-02-250 Precision Straight Edge KINEX 2500mm, DIN 874/0 723,92 1039-02-300 Precision Straight Edge KINEX 3000mm, DIN 874/0 1377,32 1039-02-400 Precision Straight Edge KINEX 4000mm, DIN 874/0 2200,85 1039-12-050 Precision Straight Edge KINEX 500mm, DIN 874/1 34,77 1039-12-075 Precision Straight Edge KINEX 750mm, DIN 874/1 54,81 e-mail: [email protected] E-shop of Measuring Tools KINEX web: https://www.kinexmeasuring.com/en/ https://shop.kinexmeasuring.com/en/ Pricelist of Measuring Tools KINEX KINEX Measuring, Podnikatelská 586, 190 11 Praha 9, Czech Republic valid from 1.1.2021 CODE recommended prices for end users EUR 1039-12-100 Precision Straight Edge KINEX 1000mm, DIN 874/1 74,77 1039-12-150 Precision Straight Edge KINEX 1500mm, DIN 874/1 145,19 1039-12-200 Precision Straight Edge KINEX 2000mm, DIN 874/1 273,69 1039-12-250 Precision Straight Edge KINEX 2500mm, DIN 874/1 524,46 1039-12-300 Precision Straight Edge KINEX 3000mm, DIN 874/1 1110,98 1039-12-400 Precision Straight Edge KINEX 4000mm, DIN 874/1 1645,08 1039-14-050 Precision Aluminium Straight Edge KINEX 500mm DIN 874/1 305,11 1039-14-050 Precision Aluminium Straight Edge KINEX 500mm DIN 874/1 305,11 1039-14-100 Precision Aluminium Straight Edge KINEX 1000mm DIN 874/1 499,88 1039-14-100 Precision Aluminium Straight Edge KINEX 1000mm DIN 874/1 499,88 1039-14-150 Precision Aluminium Straight Edge KINEX 1500mm DIN 874/1 845,66 1039-14-200 Precision Aluminium Straight Edge KINEX 2000mm DIN 874/1 1107,09 1039-17-050 Precision Stainless Steel Straight Edge 500mm KINEX,
Load more

Recommended publications
  • The Origin and Evolution of Calipers
    History of Precision Measuring Instruments The Origin and Evolution of Calipers MAP1481_E12029_2_MeasuringHistory_Calipers.indd 1 18/5/21 1:34 PM Contents 1. About the Nogisu ...............................................................................................................................1 2. About the Caliper ...............................................................................................................................2 3. Origin of the Name Nogisu and Vernier Graduations ..........................................................................4 4. Oldest Sliding Caliper: Nogisu .............................................................................................................8 5. Scabbard Type Sliding Caliper till the Middle of 19th Century .............................................................9 6. World's Oldest Vernier Caliper (Nogisu) in Existence .........................................................................11 7. Theory That the Vernier Caliper (Nogisu) Was Born in the U.S. ..........................................................12 8. Calipers before Around 1945 (the End of WWII) in the West ...........................................................13 8. 1. Slide-Catching Scale without Vernier Graduations: Simplified Calipers ......................................14 8. 2. Sliding Calipers with Diagonal Scale ..........................................................................................18 8. 3. Sliding Caliper with a Vernier Scale: Vernier Caliper ..................................................................19
    [Show full text]
  • AMC Precision, Inc
    AMC Precision, Inc 430 Robinson Street North Tonawanda, NY 14120 Onsite and Webcast Auction Tuesday, February 10th, 10:00 AM EST Blackbird Asset Services, LLC CATALOG 5586 Main Street Suite 204 Williamsville, NY 14221 716-632-1000 www.blackbirdauctions.com Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by ACH, wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, wire transfer or ACH (see wire instructions on invoice). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items.
    [Show full text]
  • EDITION 8.1 3 Table of Contents
    VICES EDITION 8.1 3 Table of contents VICES NC-Compact vices RKE 4014 RKE-M 4022 RKE-LV 4034 RKK 4040 NC-Compact twin vices RKD-M 4052 NC-Compact self centering vices RZM 4060 RKZ-M 4064 Machine vices RB-K - Orange Line 4076 RBAW 4082 MSR 4088 RS 4090 UZ 4094 Stationary power chucks KZS-P / KZS-PG 4101 KZS-H / KZS-HG 4107 SSP 4112 Drilling machine vices BSS 4120 BOF 4120 BSH 4121 DPV 4122 DPV-3-W 4122 Grinding and inspection vices PL-S micro 4126 PL-S 4126 PLF 4127 PL-G 4127 PS-SV 4128 PS-ZD 4128 Clamping force measurement device F-senso chuck 4129 Zero point clamping system EASYLOCK 4130 Errors and corrections are reserved! Vices Operation guide TYPE RKE RKE-M RKE-LV RKK NC-Compact vices - Highest clamping precision - Highest clamping precision - Very good accessibility - Designed to resist - Clamping force presetting - Without clamping force for 5-axis machining deformation for the highest - Precise, wear-resistant body presetting - Clamping force clamping precision Features - Precise, wear-resistant body presetting - Greatest repeatability - Large clamping range - Clamping force presetting Clamping mechanical-mechanical mechanical mechanical-mechanical mechanical-mechanical system size 92: mechanical-hydraulic Force amplification 3-Side, Duo-Tower 3-Side, Duo-Tower Base 3-Side, Duo-Tower Set-up options Quattro-Tower Quattro-Tower Quattro-Tower Machining centers with Operation guide high working accuracy Universal milling machi- nes with high working accuracy Universal milling machi- nes standard version Jig boring machines 5-axis machining
    [Show full text]
  • Height Gage an Inspection Certificate Is Supplied As Standard
    Height Gage An inspection certificate is supplied as standard. A standard measuring tool of industry Refer to page X for details. Linear Height SERIES 518 — High Performance 2D Measurement System Technical Data Measuring range: 0 - 977mm • Excellent accuracy of (1.1+0.6L/600)μm with • Pneumatic full/semi-floating system allows Slider stroke: 600mm Resolution: 0.0001 / 0.001 / 0.01 / 0.1mm or 0.1μm/0.4μm resolution/repeatability. adjustment of air-cushion height. (switchable) .000001” / .00001” / .0001” / .001” • High-accuracy Height Gage incorporating a • Basic statistical functions are provided and, Accuracy at 20°C*1: (1.1+0.6L/600)μm wide range of measurement functions. additionally, RS-232C data output provides L = Measuring length (mm) Repeatability (2σ)*1: Plane: 0.4μm, Bore: 0.9μm • To achieve best-in-class accuracy, a high- the option of evaluating measurement data Perpendicularity*2: 5μm (after compensation) accuracy reflective-type linear encoder and externally with SPC software on a PC. Straightness*2: 4μm (mechanical straightness) Drive method: Manual / motor (5 - 40mm/s, 7 steps) high-accuracy guide are used. • For precision Black Granite Surface Plates, Measuring force: 1N • Measurement can be implemented by icon- refer to page E-51. Balancing method: Counter balance based commands that also support easy one- • Backup/Restore of data and measurement Floating method: Full / semi-floating with built-in air compressor key operation. part programs can be implemented using Display: 5.7-inch color TFT LCD Perpendicularity (frontal) of 5μm and USB storage devices (FAT16/32 format Language for display: Japanese, English, German, French, Italian, Spanish, Dutch, Portuguese, straightness of 4μm are guaranteed.
    [Show full text]
  • Notes on Using the Height Gage
    3. Lifting of the base from the reference surface Notes on using the height gage When setting the scriber height from a gauge block stack, or from a workpiece feature, the base may lift from the surface plate if excessive downwards force is 1. Keep the column, which guides the slider, clean. If dust or dirt accumulates used on the slider, and this results in measurement error. For accurate setting, on it, sliding becomes difficult, leading to errors in setting and measuring. move the slider slowly downwards while moving the scriber tip to and fro over the gauge block surface (or feature). The correct setting is when the scriber 2. When scribing, securely lock the slider in position using the clamping PG is just felt to lightly touch as it moves over the edge of the surface. It is also arrangements provided. It is advisable to confirm the setting after clamping 25 necessary to make sure that the surface plate and height gage base reference because the act of clamping on some height gages can alter the setting surface are free of dust or burrs before use. slightly. If this is so, allowance must be made when setting to allow for this effect. 3. Parallelism between the scriber measuring face and the base reference surface should be 0.01 mm or better. Remove any dust or burrs on the mounting surface when installing the scriber or lever-type dial indicator before measurement. Keep the scriber and other parts securely fixed in place during measurement. 4. If the main scale of the height gage can be moved, move it as required to set the zero point, and securely tighten the fixing nuts.
    [Show full text]
  • Surfaceview Manual
    Table of Contents Overview ..................................................................................................................................3 Conventions used in this manual. .............................................................................................4 SurfaceView Union Jack ................................................................................................................................................5 Getting Started.......................................................................................................................5 Description of User Interface....................................................................................................8 Job Set Up ............................................................................................................................9 ELCOMAT Set Up (Ignore this if you use an electronic level or a visual autocollimator) ..............11 Administrator Functions.....................................................................................................13 Plate Measurement................................................................................................................18 Base Length ....................................................................................................................19 Diagonal Base Length .......................................................................................................22 Automated Data Collection.................................................................................................25
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Measuring Tools Catalogue No
    measuring tools catalogue No. 23 valid until 31.12.2020 PRECISE CALCULATED 2020 TAPER SLOT GAUGE steel brushed chromium-plated or ABS-plastic, reading 0.1 mm • for gap dimensions • reading 0.1 mm • steel, hardened and ground on all sides, chromium-plated, laser scale • handle knurled, scale CNC-divided • handle length 27 mm Order.-No. Dimensions Material Range Weight Euro/Pc. 88082025 125 x 8 x 8 mm steel 0.5 - 7.0 mm 39 g 37,- 88082026 109 x 8 x 8 mm steel 2.0 - 7.0 mm 38 g 37,- 88082027 165 x 12 x 8 mm steel 0.5 - 11.0 mm 62 g 43,- 88082028 165 x 12 x 8 mm plastic 0.5 - 11.0 mm 17 g 43,- BORE GAUGE, CONICAL new LIMIT PLUG GAUGE SET, 17 PARTS for measuring of conical bores DIN 7150-2/7164, sizes DIN 2245 • steel taper, brushed chromium-plated • handle anodised aluminium • made of hardened steel • reading 0.1 mm • tolerance H 7, GO- and NO GO • taper 1:10 • size: 3,4,5,6,8,10,12,14,16, 18,20,22,24,25,28,30,32 295,- Order.-No. Dimensions Taper-length Length Euro/Pc. Euro 88082040 1- 6.5 mm 65 mm 122 mm 42,- 88082041 3 - 15 mm 135 mm 190 mm 49,- Order-No.: 88086106 88082042 15 - 30 mm 165 mm 250 mm 64,- PARALLEL STEEL SET hardened, HRC 60 ±2, “TOP“, parallelism + 0.010 mm • made of alloyed steel • ground and hardened in pairs • tolerance ± 0.01 mm tolerance height ± 0.01 mm 20 pairs • marked laser dimensions mm tolerance width ± 0.01 mm • on wood stands or wooden case tolerance length ± 0.5 mm tolerance in pairs ± 0.01 mm 470,- Euro Order-No.: 86062096 Range Thickness mm Size mm Weight 2 x 5 | 2 x 10 | 2 x 15 | 2 x 20 | 3 x 6 | 3 x 11 |
    [Show full text]
  • Surface Plates
    CALL US TODAY +1-262-422-1197 BUSCH PRECISION EQUIPMENTcan help you… Improve manufacturing efficiency and quality • Reduce costs and increase profits Worldwide consumer preference for L better products and the accompanying development of international quality standards demands meticulous QUALITY attention to accuracy in all phases of ASSURANCE & manufacturing. PRODUCT This catalog describes over 300 standard SATISFACTION types and sizes of basic precision Since 1907, BUSCH has been equipment designed to: serving industry’s basic precision equipment needs. L Facilitate layout of tooling As a diversified full-service L Speed production and assembly machine center, as well as a L Simplify and speed inspection manufacturer of precision equipment, we know and use the L Provide quality assurance products. Every effort is made to provide the highest quality products consistent with cost and material availability. Each In addition to the standard items item is carefully inspected and calibrated to insure conformance illustrated in this catalog, we also to specified tolerances and for compliance with all recognized design and manufacture custom standards. Inspection and calibration are performed by equipment to meet special applications. qualified technicians using appropriate state-of-the-art instrumentation. We also recondition worn or repair Certification of Accuracy is available for any item on request damaged equipment. This can be a and such certification is traceable to the National Institute of wise financial move in that regrinding Standards and Technology (NIST). Detailed information on our out-of-tolerance items can be calibration and inspection procedures and instrumentation can accomplished at considerable savings be found on page 19. over replacement cost.
    [Show full text]
  • SURFACE PLATES - SQUARES - BEAMS - STANDS V-BLOCKS - STRAIGHT EDGES SPECIAL CONSTRUCTIONS of GRANITE (Fine Black Or Impala)
    Präzisionstechnik Klaus Schlitt e.K. Große Hub 3a – 65344 Eltville-Martinsthal/Germany Tel.: +49 - (0)6123 – 70377 0 Fax: +49 - (0)6123 – 70377 22 e-mail: [email protected] http://www.schlitt-werkzeuge.de SURFACE PLATES - SQUARES - BEAMS - STANDS V-BLOCKS - STRAIGHT EDGES SPECIAL CONSTRUCTIONS of GRANITE (Fine Black or Impala) Granite 3 CONTENTS Page GENERAL Fine Black Granite 4 Services 6 GRANITE Precision granite surface plate 7 Standards 8 Steel TEE-Slots 8 Inserts 9 Adjustable Elements 9 Adjustable Supports 10 Ball joints 10 Support stands - safety 11 Support stands 11 Support cabinets - safety 12 Support cabinets 12 Precision Granite Castings 13 Special constructions 14 Lightweight surface plates 15 Granite surface plates with honeycomb structure 15 Concentricity test equipment 16 Pair of Tailstocks 16 Cleaning and maintenance products 17 Squares 90° 18 Parallels 19 Straightedges 19 Dial gauge stands with granite base 20 Universal measuring dial stand 22 CAST IRON Marking out tables 23 Surface accuracy according to DIN 876 25 T-slots according to DIN 650 25 Surface plates 26 Table Support Frames 26 Base cabinets 27 Adjustable height supports 27 Duplex lapping and master plates 27 V-blocks – lapped in pairs 28 Double V-blocks – lapped in pairs 28 Triangular straightedges 29 Straightedges 29 Straightedges with 2 handles 30 Angle plates 90° 30 2 GRANITE STABILITY OF TEMPERATURE The earth offers many varieties and qualities of granite Due to a low coefficient of expansion (Fine Black millions of years old. By no means would every variety Granite 5x10-6, normal granite 7x10-6 meter per degree) of granite be suitable.
    [Show full text]
  • Clamping, Testing and Lifting SPECIAL DEALS!
    Clamping, testing and lifting Our solutions for your production SPECIAL DEALS! Up to 50% discount on the list price nd nose a m th a u s o k s M fre u e* for yo Special net prices plus VAT valid until 31.08.2020 while stocks last Clamping, testing & lifting “Through the use of our products and services, our customer’s productivity of their production can be increased by 100 %, with their production costs being dramatically reduced.” Michael Spreitzer, Managing Director Benefit from our attractive price campaign! Innovative products from the following different product areas: Centre-clamping vises | Compact vises | ALUMESS – Fixturing systems Clamping tools for toolmaking and control Automation Download >> Download >> Download >> Concentricity gages Magnetic clamping technology Vacuum clamping technology for CNC machining Download >> Download >> Download >> Special promotion: Mouth and nose mask Quality products from our customer in Germany. *You will receive a mask from us for free with every order! If you need more masks … This mouth and nose mask is used only to minimize the risk of infection from others through droplet infection. The mask has not been tested for standards EN149 or EN14683 and is not a „personal protective equipment“. Since it is a hygiene item, the mask is non-returnable. The mask must be washed before first use (machine wash up to 90°C). · Material: 100 % Cotton, Oeko-Tex® Standard 100 product class 2, 120g/qm · Sewn in two layers, reusable and washable · Size L: 56 – 61 cm · Packaging unit 10 pieces · Order no. B909000001 Price/10 Pieces: 55,00 Euro 2 Clamping, milling & drilling Mechanical centre-clamping vises MZR The compact centre-clamping vise series MZR is used as a cost-ef- fective clamping device for clamping raw parts on multi-axis machin- ing centres and automation systems.
    [Show full text]
  • Surface Plates - Squares - Beams - Stands V-Blocks - Straight Edges Special Constructions
    Schlitt Werkzeuge und Werkzeugmaschinen GmbH Europastraße 10 – 65385 Rüdesheim Tel.: +49 - (0)6722 - 9445658 Fax: +49 - (0)6722 - 9445659 e-mail: [email protected] SURFACE PLATES - SQUARES - BEAMS - STANDS V-BLOCKS - STRAIGHT EDGES SPECIAL CONSTRUCTIONS of GRANITE (Fine Black or Impala) Granite 3 CONTENTS Page GENERAL Fine Black Granite 4 Services 6 GRANITE Precision granite surface plate 7 Standards 8 Steel TEE-Slots 8 Inserts 9 Adjustable Elements 9 Adjustable Supports 10 Ball joints 10 Support stands - safety 11 Support stands 11 Support cabinets - safety 12 Support cabinets 12 Precision Granite Castings 13 Special constructions 14 Lightweight surface plates 15 Granite surface plates with honeycomb structure 15 Concentricity test equipment 16 Pair of Tailstocks 16 Cleaning and maintenance products 17 Squares 90° 18 Parallels 19 Straightedges 19 Dial gauge stands with granite base 20 Universal measuring dial stand 22 CAST IRON Marking out tables 23 Surface accuracy according to DIN 876 25 T-slots according to DIN 650 25 Surface plates 26 Table Support Frames 26 Base cabinets 27 Adjustable height supports 27 Duplex lapping and master plates 27 V-blocks – lapped in pairs 28 Double V-blocks – lapped in pairs 28 Triangular straightedges 29 Straightedges 29 Straightedges with 2 handles 30 Angle plates 90° 30 2 GRANITE STABILITY OF TEMPERATURE The earth offers many varieties and qualities of granite Due to a low coefficient of expansion (Fine Black millions of years old. By no means would every variety Granite 5x10-6, normal granite 7x10-6 meter per degree) of granite be suitable. A soft or porous granite variety the expansion is low as well.
    [Show full text]