PIANO Olefins Standard

Total Page：16

File Type：pdf, Size：1020Kb

PIANO Olefins Standard Product #: VHG-PIANO-OLE-0.1 Lot #: 711036615 Concentration Concentration Component Component (Wt. %) (Wt. %) 3-Methyl-1-butene 1.9608 cis-3-Heptene 5.7577 1-Pentene 4.0999 trans-2-Heptene 3.6684 2-Methyl-1-butene 1.4268 cis-2-Heptene 5.6638 2-Methyl-1,3-butadiene 2.4036 1-Octene 7.5936 trans-2-Pentene 1.7990 trans-2-Octene 1.9463 cis-2-Pentene 1.9683 cis-2-Octene 3.8744 4-Methylpentene-1 3.3837 1-Nonene 7.5680 1-Hexene 6.9484 trans-3-Nonene 1.8292 trans-2-Hexene 1.7285 cis-3-Nonene 3.9639 2-Methylpentene-2 3.3104 trans-2-Nonene 1.8292 cis-2-Hexene 3.8552 cis-2-Nonene 2.7013 1-Heptene 7.4930 1-Decene 8.0821 trans-3-Heptene 3.6247 This standard is intended for use in Detailed Hydrocarbon Analysis utilizing ASTM methods D6729, D6730, D6733, and D5134. Certification: This standard was prepared utilizing gravimetric methods. The certified concentrations are based upon the actual assayed concentrations of the raw materials and all gravimetric procedures used in the preparation of this certified standard. Secondary verification of the certified concentrations was performed using gas chromatography. The uncertainty associated with each certified concentration is ±1% relative, which is the sum of the estimated errors due to the assay and purity of the raw materials, and the gravimetric preparation of the solution. This standard is NIST traceable by weight. Tools: The balance used to weigh materials used in the preparation of this standard is calibrated regularly using mass standards, which are traceable to NIST. Recommendations: VHG guarantees the accuracy of this solution for 12 Months from the certification date shown below, provided it is stored under normal laboratory conditions in the original container. VHG Labs, Inc. See Exp. date on container Chuck Goudreau, Certifying Officer Certification Date LGC waives all responsibility for any damages resulting from the usage and/or implementation of the products/data described herein. Page 1 of 1 .

Copy Link

Recommended publications

(Vocs and Svocs) from Warm Mix Asphalt Incorporating Natural Zeolite and Reclaimed Asphalt Pavement for Sustainable Pavements
sustainability Article Evaluation of Reductions in Fume Emissions (VOCs and SVOCs) from Warm Mix Asphalt Incorporating Natural Zeolite and Reclaimed Asphalt Pavement for Sustainable Pavements Javier Espinoza 1,2 , Cristian Medina 1,2, Alejandra Calabi-Floody 3 , Elsa Sánchez-Alonso 3 , Gonzalo Valdés 3 and Andrés Quiroz 1,2,* 1 Chemical Ecology Laboratory, Department of Chemical Sciences and Natural Resources, University of La Frontera, Temuco 4811230, Chile; [email protected] (J.E.); [email protected] (C.M.) 2 Biotechnological Research Center Applied to the Environment (CIBAMA), University of La Frontera, Temuco 4811230, Chile 3 Department of Civil Works Engineering, University of La Frontera, Temuco 4811230, Chile; [email protected] (A.C.-F.); [email protected] (E.S.-A.); [email protected] (G.V.) * Correspondence: [email protected] Received: 26 September 2020; Accepted: 10 November 2020; Published: 17 November 2020 Abstract: Conventional asphalt mixtures used for road paving require high manufacturing temperatures and therefore high energy expenditure, which has a negative environmental impact and creates risk in the workplace owing to high emissions of pollutants, greenhouse gases, and toxic fumes. Reducing energy consumption and emissions is a continuous challenge for the asphalt industry. Previous studies have focused on the reduction of emissions without characterizing their composition, and detailed characterization of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) in asphalt fumes is scarce. This communication describes the characterization and evaluation of VOCs and SVOCs from asphalt mixtures prepared at lower production temperatures using natural zeolite; in some cases, reclaimed asphalt pavement (RAP) was used.
[Show full text]
Part I: Carbonyl-Olefin Metathesis of Norbornene
Part I: Carbonyl-Olefin Metathesis of Norbornene Part II: Cyclopropenimine-Catalyzed Asymmetric Michael Reactions Zara Maxine Seibel Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Graduate School of Arts and Sciences COLUMBIA UNIVERSITY 2016 1 © 2016 Zara Maxine Seibel All Rights Reserved 2 ABSTRACT Part I: Carbonyl-Olefin Metathesis of Norbornene Part II: Cyclopropenimine-Catalyzed Asymmetric Michael Reactions Zara Maxine Seibel This thesis details progress towards the development of an organocatalytic carbonyl- olefin metathesis of norbornene. This transformation has not previously been done catalytically and has not been done in practical manner with stepwise or stoichiometric processes. Building on the previous work of the Lambert lab on the metathesis of cyclopropene and an aldehyde using a hydrazine catalyst, this work discusses efforts to expand to the less stained norbornene. Computational and experimental studies on the catalytic cycle are discussed, including detailed experimental work on how various factors affect the difficult cycloreversion step. The second portion of this thesis details the use of chiral cyclopropenimine bases as catalysts for asymmetric Michael reactions. The Lambert lab has previously developed chiral cyclopropenimine bases for glycine imine nucleophiles. The scope of these catalysts was expanded to include glycine imine derivatives in which the nitrogen atom was replaced with a carbon atom, and to include imines derived from other amino acids. i Table of Contents List of Abbreviations…………………………………………………………………………..iv Part I: Carbonyl-Olefin Metathesis…………………………………………………………… 1 Chapter 1 – Metathesis Reactions of Double Bonds………………………………………….. 1 Introduction………………………………………………………………………………. 1 Olefin Metathesis………………………………………………………………………… 2 Wittig Reaction…………………………………………………………………………... 6 Tebbe Olefination………………………………………………………………………... 9 Carbonyl-Olefin Metathesis…………………………………………………………….
[Show full text]
United States Patent (19) 11 Patent Number: 5,731,483 Stabel Et Al
US005731483A United States Patent (19) 11 Patent Number: 5,731,483 Stabel et al. 45 Date of Patent: Mar. 24, 1998 54 RECYCLING OF PLASTICS IN A STEAM 52 U.S. Cl. .......................... 585/241; 585/648; 208/130 CRACKER 58 Field of Search ..................................... 585/241, 648; 208/130 75) Inventors: Uwe Stabel, Edingen-Neckarhausen; Helmut Woerz, Mannheim; Ruediger 56) References Cited Kotkamp, Limburgerhof; Andreas U.S. PATENT DOCUMENTS Fried, Bobenheim-Roxheim, all of Germany 5,364.995 11/1994 Kirkwood et al. ...................... 585,241 73) Assignee: BASFAktiengesellschaft, FOREIGN PATENT DOCUMENTS Ludwigshafen, Germany 2108.968 9/1983 Canada. 2094.456 10/1993 Canada. 21) Appl. No.: 553,658 502 618 9/1992 European Pat. Off. 567 292 10/1993 European Pat. Off. 22 PCT Filed: May 20, 1994 WO93/1812 9/1993 WIPO. (86 PCT No.: PCT/EP94/01647 Primary Examiner-Glenn Caldarola S371 Date: Nov. 17, 1995 Assistant Examiner-Bekir L. Yildirim Attorney, Agent, or Firm-Keil & Weinkauf S 102(e) Date: Nov. 17, 1995 57 ABSTRACT 87 PCT Pub. No.: WO95/03375 A process for recycling plastic waste in a steam cracker, PCT Pub. Date: Feb. 2, 1995 wherein a melt obtained from plastic waste is converted into 30 Foreign Application Priority Data products at from 400° 550° C., and a distillate fraction is separated off from the products at from 180° to 280° C. and Jul. 20, 1993 DEl Germany .......................... 43 24, 112.3 is fed as feed material to a steam cracker, Jan. 10, 1994 DEl Germany .......................... 4400 366.8 (51 int. Cl. .................. C07C 1/00; CO7C 4/22 9 Claims, 2 Drawing Sheets - N 5 AAA' U.S.
[Show full text]
Catalytic Pyrolysis of Plastic Wastes for the Production of Liquid Fuels for Engines
Electronic Supplementary Material (ESI) for RSC Advances. This journal is © The Royal Society of Chemistry 2019 Supporting information for: Catalytic pyrolysis of plastic wastes for the production of liquid fuels for engines Supattra Budsaereechaia, Andrew J. Huntb and Yuvarat Ngernyen*a aDepartment of Chemical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, 40002, Thailand. E-mail:[email protected] bMaterials Chemistry Research Center, Department of Chemistry and Center of Excellence for Innovation in Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen, 40002, Thailand Fig. S1 The process for pelletization of catalyst PS PS+bentonite PP ) t e PP+bentonite s f f o % ( LDPE e c n a t t LDPE+bentonite s i m s n HDPE a r T HDPE+bentonite Gasohol 91 Diesel 4000 3500 3000 2500 2000 1500 1000 500 Wavenumber (cm-1) Fig. S2 FTIR spectra of oil from pyrolysis of plastic waste type. Table S1 Compounds in oils (%Area) from the pyrolysis of plastic wastes as detected by GCMS analysis PS PP LDPE HDPE Gasohol 91 Diesel Compound NC C Compound NC C Compound NC C Compound NC C 1- 0 0.15 Pentane 1.13 1.29 n-Hexane 0.71 0.73 n-Hexane 0.65 0.64 Butane, 2- Octane : 0.32 Tetradecene methyl- : 2.60 Toluene 7.93 7.56 Cyclohexane 2.28 2.51 1-Hexene 1.05 1.10 1-Hexene 1.15 1.16 Pentane : 1.95 Nonane : 0.83 Ethylbenzen 15.07 11.29 Heptane, 4- 1.81 1.68 Heptane 1.26 1.35 Heptane 1.22 1.23 Butane, 2,2- Decane : 1.34 e methyl- dimethyl- : 0.47 1-Tridecene 0 0.14 2,2-Dimethyl- 0.63 0 1-Heptene 1.37 1.46 1-Heptene 1.32 1.35 Pentane,
[Show full text]
ECO-Ssls for Pahs
Ecological Soil Screening Levels for Polycyclic Aromatic Hydrocarbons (PAHs) Interim Final OSWER Directive 9285.7-78 U.S. Environmental Protection Agency Office of Solid Waste and Emergency Response 1200 Pennsylvania Avenue, N.W. Washington, DC 20460 June 2007 This page intentionally left blank TABLE OF CONTENTS 1.0 INTRODUCTION .......................................................1 2.0 SUMMARY OF ECO-SSLs FOR PAHs......................................1 3.0 ECO-SSL FOR TERRESTRIAL PLANTS....................................4 5.0 ECO-SSL FOR AVIAN WILDLIFE.........................................8 6.0 ECO-SSL FOR MAMMALIAN WILDLIFE..................................8 6.1 Mammalian TRV ...................................................8 6.2 Estimation of Dose and Calculation of the Eco-SSL ........................9 7.0 REFERENCES .........................................................16 7.1 General PAH References ............................................16 7.2 References Used for Derivation of Plant and Soil Invertebrate Eco-SSLs ......17 7.3 References Rejected for Use in Derivation of Plant and Soil Invertebrate Eco-SSLs ...............................................................18 7.4 References Used in Derivation of Wildlife TRVs .........................25 7.5 References Rejected for Use in Derivation of Wildlife TRV ................28 i LIST OF TABLES Table 2.1 PAH Eco-SSLs (mg/kg dry weight in soil) ..............................4 Table 3.1 Plant Toxicity Data - PAHs ..........................................5 Table 4.1
[Show full text]
Alfa Olefins Cas N
OECD SIDS ALFA OLEFINS FOREWORD INTRODUCTION ALFA OLEFINS CAS N°:592-41-6, 111-66-0, 872-05-9, 112-41-4, 1120-36-1 UNEP PUBLICATIONS 1 OECD SIDS ALFA OLEFINS SIDS Initial Assessment Report For 11th SIAM (Orlando, Florida, United States 1/01) Chemical Name: 1-hexene Chemical Name: 1-octene CAS No.: 592-41-6 CAS No.: 111-66-0 Chemical Name: 1-decene Chemical Name: 1-dodecene CAS No.: 872-05-9 CAS No.: 112-41-4 Chemical Name: 1-tetradecene CAS No.: 1120-36-1 Sponsor Country: United States National SIDS Contract Point in Sponsor Country: United States: Dr. Oscar Hernandez Environmental Protection Agency OPPT/RAD (7403) 401 M Street, S.W. Washington, DC 20460 Sponsor Country: Finland (for 1-decene) National SIDS Contact Point in Sponsor Country: Ms. Jaana Heiskanen Finnish Environment Agency Chemicals Division P.O. Box 140 00251 Helsinki HISTORY: SIDS Dossier and Testing Plan were reviewed at the SIDS Review Meeting or in SIDS Review Process on October 1993. The following SIDS Testing Plan was agreed: No testing ( ) Testing (x) Combined reproductive/developmental on 1-hexene, combined repeat dose/reproductive/developmental on 1-tetradecene and acute fish, daphnid and algae on 1- tetradecene. COMMENTS: The following comments were made at SIAM 6 and have been incorporated in this version of the SIAR: 2 UNEP PUBLICATIONS OECD SIDS ALFA OLEFINS 1. The use of QSAR calculations for aquatic toxicity, 2. More quantitative assessment of effects; and 3. Provide more details for each endpoint. The following comments were made at SIAM 6, but were not incorporated into the SIAR for the reasons provided: 1.
[Show full text]
Catalytic Enantioselective Carbon-Carbon Bond Formation Using Cycloisomerization Reactions
View Online / Journal Homepage / Table of Contents for this issue Chemical Science Dynamic Article LinksC< Cite this: Chem. Sci., 2012, 3, 2899 www.rsc.org/chemicalscience MINIREVIEW Catalytic enantioselective carbon-carbon bond formation using cycloisomerization reactions Iain D. G. Watsona and F. Dean Toste*b Received 30th April 2012, Accepted 7th June 2012 DOI: 10.1039/c2sc20542d This review describes important recent advancements in asymmetric cycloisomerization reactions. A wide variety of catalytic and asymmetric strategies have been applied to these reactions over the past twenty years. Cycloisomerization reactions have the ability to produce diverse polycyclic compounds in excellent yields and selectivity. They constitute a powerful and efficient strategy for asymmetric carbon- carbon bond formation in cyclic compounds. Enyne and related olefin cyclizations comprise the majority of reactions of this type and important advances have recently occurred in this area. However, significant changes have also occurred in the area of classical cyclization as well as intramolecular hydroacylation and C–H activation initiated cyclization and these will also be described. 1 Introduction The purpose of this review is to describe important new advances in asymmetric cycloisomerization reactions. In partic- The synthesis of rings is central to the art of organic synthesis. ular, this review will focus on enantioselective carbon-carbon Cyclic compounds abound in chemistry, from strained three bond forming cycloisomerizations. Many aspects of cyclo- membered rings to macrocyclic monsters. A common synthetic isomerization reactions have already been reviewed,3 including challenge is the creation of a ring within a certain target mechanistic4 and asymmetric aspects of the reaction.5 This compound.
[Show full text]
7Alkenes and Alkynes I: Properties and Synthesis
P1: PBU/OVY P2: PBU/OVY QC: PBU/OVY T1: PBU Printer: Bind Rite JWCL234-07 JWCL234-Solomons-v1 December 8, 2009 21:37 7 ALKENES AND ALKYNES I: PROPERTIES AND SYNTHESIS. ELIMINATION REACTIONS OF ALKYL HALIDES SOLUTIONS TO PROBLEMS 7.1 (a) (E )-1-Bromo-1-chloro-1-pentene or (E )-1-Bromo-1-chloropent-1-ene (b) (E )-2-Bromo-1-chloro-1-iodo-1-butene or (E )-2-Bromo-1-chloro-1-iodobut-1-ene (c) (Z )-3,5-Dimethyl-2-hexene or (Z )-3,5-Dimethylhex-2-ene (d) (Z )-1-Chloro-1-iodo-2-methyl-1-butene or (Z )-1-Chloro-1-iodo-2-methylbut-1-ene (e) (Z,4S )-3,4-Dimethyl-2-hexene or (Z,4S )-3,4-Dimethylhex-2-ene (f) (Z,3S )-1-Bromo-2-chloro-3-methyl-1-hexene or (Z,3S )-1-Bromo-2-chloro-3-methylhex-1-ene 7.2 <<Order of increasing stability 7.3 (a), (b) H 2 Δ H° = − 119 kJ mol−1 Pt 2-Methyl-1-butene pressure (disubstituted) H 2 Δ H° = − 127 kJ mol−1 Pt 3-Methyl-1-butene pressure (monosubstituted) H2 − Δ H° = − 113 kJ mol 1 Pt 2-Methyl-2-butene pressure (trisubstituted) (c) Yes, because hydrogenation converts each alkene into the same product. 106 CONFIRMING PAGES P1: PBU/OVY P2: PBU/OVY QC: PBU/OVY T1: PBU Printer: Bind Rite JWCL234-07 JWCL234-Solomons-v1 December 8, 2009 21:37 ALKENES AND ALKYNES I: PROPERTIES AND SYNTHESIS 107 H H (d) >> H H H (trisubstituted) (disubstituted) (monosubstituted) Notice that this predicted order of stability is conﬁrmed by the heats of hydro- genation.
[Show full text]
Radical Approaches to Alangium and Mitragyna Alkaloids
Radical Approaches to Alangium and Mitragyna Alkaloids A Thesis Submitted for a PhD University of York Department of Chemistry 2010 Matthew James Palframan Abstract The work presented in this thesis has focused on the development of novel and concise syntheses of Alangium and Mitragyna alkaloids, and especial approaches towards (±)-protoemetinol (a), which is a key precursor of a range of Alangium alkaloids such as psychotrine (b) and deoxytubulosine (c). The approaches include the use of a key radical cyclisation to form the tri-cyclic core. O O O N N N O O O H H H H H H O N NH N Protoemetinol OH HO a Psychotrine Deoxytubulosine b c Chapter 1 gives a general overview of radical chemistry and it focuses on the application of radical intermolecular and intramolecular reactions in synthesis. Consideration is given to the mediator of radical reactions from the classic organotin reagents, to more recently developed alternative hydrides. An overview of previous synthetic approaches to a range of Alangium and Mitragyna alkaloids is then explored. Chapter 2 follows on from previous work within our group, involving the use of phosphorus hydride radical addition reactions, to alkenes or dienes, followed by a subsequent Horner-Wadsworth-Emmons reaction. It was expected that the tri-cyclic core of the Alangium alkaloids could be prepared by cyclisation of a 1,7-diene, using a phosphorus hydride to afford the phosphonate or phosphonothioate, however this approach was unsuccessful and it highlighted some limitations of the methodology. Chapter 3 explores the radical and ionic chemistry of a range of silanes.
[Show full text]
Metathesis of 1-Hexene Over Heterogeneous Tungsten-Based Catalysts
METATHESIS OF 1-HEXENE OVER HETEROGENEOUS TUNGSTEN-BASED CATALYSTS Arisha Prithipal [BSc. (Eng)] In fulfilment of the requirements for the degree of Master of Science in Engineering at the School of Chemical Engineering, University of KwaZulu-Natal March, 2013 Supervisor: Prof. M. Starzak Co-Supervisor: Dr. D. Lokhat The financial assistance of the National Research Foundation (NRF) towards this research is hereby acknowledged. Opinions expressed and conclusions arrived at, are those of the author and are not necessarily to be attributed to the NRF. As the candidate’s Supervisor I agree to the submission of this thesis: ______________________________ _____________________________ Professor M. Starzak Dr. D. Lokhat DECLARATION I, Arisha Prithipal declare that (i) The research reported in this dissertation/thesis, except where otherwise indicated, is my original work. (ii) This dissertation/thesis has not been submitted for any degree or examination at any other university. (iii) This dissertation/thesis does not contain other persons’ data, pictures, graphs or other information, unless specifically acknowledged as being sourced from other persons. (iv) This dissertation/thesis does not contain other persons’ writing, unless specifically acknowledged as being sourced from other researchers. Where other written sources have been quoted, then: a) their words have been re-written but the general information attributed to them has been referenced; b) where their exact words have been used, their writing has been placed inside quotation marks, and referenced. (v) Where I have reproduced a publication of which I am an author, co-author or editor, I have indicated in detail which part of the publication was actually written by myself alone and have fully referenced such publications.
[Show full text]
Properties and Synthesis. Elimination Reactions of Alkyl Halides
P1: PBU/OVY P2: PBU/OVY QC: PBU/OVY T1: PBU Printer: Bind Rite JWCL234-07 JWCL234-Solomons-v1 December 8, 2009 21:37 7 ALKENES AND ALKYNES I: PROPERTIES AND SYNTHESIS. ELIMINATION REACTIONS OF ALKYL HALIDES SOLUTIONS TO PROBLEMS 7.1 (a) ( E )-1-Bromo-1-chloro-1-pentene or ( E )-1-Bromo-1-chloropent-1-ene (b) ( E )-2-Bromo-1-chloro-1-iodo-1-butene or ( E )-2-Bromo-1-chloro-1-iodobut-1-ene (c) ( Z )-3,5-Dimethyl-2-hexene or ( Z )-3,5-Dimethylhex-2-ene (d) ( Z )-1-Chloro-1-iodo-2-methyl-1-butene or ( Z )-1-Chloro-1-iodo-2-methylbut-1-ene (e) ( Z,4 S )-3,4-Dimethyl-2-hexene or ( Z,4 S )-3,4-Dimethylhex-2-ene (f) ( Z,3 S )-1-Bromo-2-chloro-3-methyl-1-hexene or (Z,3 S )-1-Bromo-2-chloro-3-methylhex-1-ene 7.2 < < Order of increasing stability 7.3 (a), (b) H − 2 ∆ H° = − 119 kJ mol 1 Pt 2-Methyl-1-butene pressure (disubstituted) H2 − ∆ H° = − 127 kJ mol 1 Pt 3-Methyl-1-butene pressure (monosubstituted) H2 − ∆ H° = − 113 kJ mol 1 Pt 2-Methyl-2-butene pressure (trisubstituted) (c) Yes, because hydrogenation converts each alkene into the same product. 106 CONFIRMING PAGES P1: PBU/OVY P2: PBU/OVY QC: PBU/OVY T1: PBU Printer: Bind Rite JWCL234-07 JWCL234-Solomons-v1 December 8, 2009 21:37 ALKENES AND ALKYNES I: PROPERTIES AND SYNTHESIS 107 H H (d) > > H H H (trisubstituted) (disubstituted) (monosubstituted) Notice that this predicted order of stability is conﬁrmed by the heats of hydro- genation.
[Show full text]
Reactions of Alkenes and Alkynes
05 Reactions of Alkenes and Alkynes Polyethylene is the most widely used plastic, making up items such as packing foam, plastic bottles, and plastic utensils (top: © Jon Larson/iStockphoto; middle: GNL Media/Digital Vision/Getty Images, Inc.; bottom: © Lakhesis/iStockphoto). Inset: A model of ethylene. KEY QUESTIONS 5.1 What Are the Characteristic Reactions of Alkenes? 5.8 How Can Alkynes Be Reduced to Alkenes and 5.2 What Is a Reaction Mechanism? Alkanes? 5.3 What Are the Mechanisms of Electrophilic Additions HOW TO to Alkenes? 5.1 How to Draw Mechanisms 5.4 What Are Carbocation Rearrangements? 5.5 What Is Hydroboration–Oxidation of an Alkene? CHEMICAL CONNECTIONS 5.6 How Can an Alkene Be Reduced to an Alkane? 5A Catalytic Cracking and the Importance of Alkenes 5.7 How Can an Acetylide Anion Be Used to Create a New Carbon–Carbon Bond? IN THIS CHAPTER, we begin our systematic study of organic reactions and their mecha- nisms. Reaction mechanisms are step-by-step descriptions of how reactions proceed and are one of the most important unifying concepts in organic chemistry. We use the reactions of alkenes as the vehicle to introduce this concept. 129 130 CHAPTER 5 Reactions of Alkenes and Alkynes 5.1 What Are the Characteristic Reactions of Alkenes? The most characteristic reaction of alkenes is addition to the carbon–carbon double bond in such a way that the pi bond is broken and, in its place, sigma bonds are formed to two new atoms or groups of atoms. Several examples of reactions at the carbon–carbon double bond are shown in Table 5.1, along with the descriptive name(s) associated with each.
[Show full text]