SIEMENS
Teleprinter Model 1000 CA
Operating Instructions CONTENTS Page
1 T e l e p r i n t e r M o d e l T 1 0 0 0 C A 1 - 1
2 C o n t r o l e l e m e n t s 2 - 1 2.1 Keyboard 2-1 2 . 2 M a n u a l c o m m u n i c a t i o n s c o n t r o l s 2 - 2 2 . 3 M a n u a l d e v i c e c o n t r o l s 2 - 2
3 O f f - l i n e m o d e 3 - 1 3 . 1 B a s i c k e y 3 - 1 3 . 2 E n c i p h e r i n g , u s i n g t h e b u f f e r 3 - 2 3 . 3 E n c i p h e r i n g w i t h o u t b u f f e r 3 - 3 3 . 4 D e c i p h e r i n g , u s i n g t h e b u f f e r 3 - 4 3 . 5 D e c i p h e r i n g w i t h o u t b u f f e r 3 - 6 3.6 Plain text 3-8 3.7 Preparation of a perforated tape 3-9 3.8 Verification of a perforated tape 3-11 3.9 Duplication of a perforated tape 3-12 3 . 1 0 C o r r e c t i o n o f a p e r f o r a t e d t a p e b y o v e r p u n c h i n g 3 - 1 4 3 . 1 1 C o r r e c t i o n o f a p e r f o r a t e d t a p e b y d u p l i c a t i o n 3 - 1 5
4. Line-connected mode 4-1 4 . 1 T r a n s m i s s i o n o f a n e n c i p h e r e d m e s s a g e f r o m t h e t a p e 4 - 1 4.2 Transmission of an enciphered message from the cryptomemory 4-3 4.3 Transmission of plain text 4-5 4 . 4 O p e r a t i o n o v e r d e d i c a t e d c i r c u i t s 4 - 7 4 . 5 R e c e p t i o n o f a t e l e p r i n t e r m e s s a g e 4 - 8 4.6 Reception of enciphered text 4-8 4.7 Reception of plain text 4-9
5 O p t i o n s 5 - 1 5.1 Function of CORR button 5-1 5 . 2 C o r r e c t i o n d u r i n g i n p u t f o r e n c i p h e r i n g , u s i n g t h e b u f f e r 5 - 1 5 . 3 C o r r e c t i o n d u r i n g i n p u t f o r d e c i p h e r i n g , u s i n g t h e b u f f e r 5 - 2 5.4 Plain text inserted ahead of message 5-4 5.5 Plain text added at end of message 5-4 5.6 Function of Zeroizing button 5-5 5 . 7 B a t t e r y d r a i n i n d i c a t o r 5 - 5 5.8 Break-in procedure 5-5
6 V a r i a n t - d e p e n d e n t f u n c t i o n s 6 - 1 6 . 1 M a n u a l l o a d i n g o f m e s s a g e k e y 6 - 1 6.2 Page information 6-2 6.3 Omitting NNNN at end of message 6-2 6.4 Loading plain text into the storage, using the pedal 6-2 6.5 Plain text transmission, using the pedal 6-3
Zust.: 4 0-1 A22713-A1000-Y1 -*-761 9 Page 7 R e p l a c i n g t h e p a p e r r o l l 7 _ - |
8 A d j u s t i n g t h e l i n e s p a c i n g , p r i n t f o r c e a n d t e l e g r a p h s p e e d 8 - 1
9 R e p l a c i n g t h e p a p e r t a p e r o l l 9 _ 1
1 0 R e p l a c i n g t h e i n k r i b b o n 1 0 - 1
11 Replacing the print wheel 11_1
1 2 C l e a n i n g t h e t e l e p r i n t e r 1 2 - 1
13 Functional test with test tape 13-1
14 Ordering data 14_1
Zust.: 4 0-2 . A22713-A1000-Y1-*-7619 1 TELEPRINTER MODEL 1000 CA
11 10
1 . Keyboard 2. Manual device controls 3- Manual communications controls 4. Tape punch 5. Punch control buttons 6. Tape reader 7. Crypto module 8. Security lock 2 9. Zeroizing button 10. Security lock 1 11. Battery drain indicator
Zust.: 5 1-1 A22713-A1000-Y1-*-7619 2 CONTROL ELEMENTS
2.1 Keyboard
Bell Run-out Carriage Return
The distant subscriber The character last i s c a l l e d t o t h e t e l e entered is repeated as long printer as this button is held de pressed, except for New Line
New Line Line Feed Figures Shift
Who-are-you? Here-is Letters Shift
Identification code Identification code of O n l y f o r c o r r e c t i n g (answerback) of distant l o c a l s t a t i o n i s t r a n s a perforated tape s t a t i o n i s s o l i c i t e d mitted and simultane and printed o u s l y p r i n t e d
Space
Zust.: 5 2-1 A22713-A1000-Y1-*-76l 9 2.2 Manual communications controls
Eiaeai
Line button KS. Off-line button Off button
Not assigned
2.3 Manual device controls
0"0 red red green white white red yellow green
PROC P.S. ENCI OUTPUT M.P. PLAIN CORR DECI
Punch Standby button PROC button All incoming messages are punched Depression of this button initiates the into tape enciphering process. Its release terminates this process
P. S. button ENCI button The POST SCRIPTUM mode permits plain Beginning of enciphering process text to be inserted at the end of the enciphered message
OUTPUT button M. P. button The message held in the crypto- The message is transferred to the crypto- memory is put out. Output is stopped memory by operating this button during message output
PLAIN button CORR button Permits plain text operation in the The message put in for deciphering or off-line mode enciphering, using the buffer, can be corrected character by character.
DECI button Cut-over to the deciphering mode
Zust.: 4 2-2 A22713-A1000-Y1-*-76l9 3 O F F - L I N E M O D E Off-line operation is interrupted by an incoming telex message. At the end of the message, check the characters put in and re-insert missing characters. 3.1 Basic key
Loading the basic key V 1. Depress Off-line button Lamp comes on i EinEBI Printer carriage moves to beginning-of-line position Paper is advanced by one line Internal illumination is turned on
2. Physical key S1 INSERT is printed has to be inserted and V turned (for compartment • c = 3 O C=o addresses A-W and Z)
3. Physical key S2 Only if required V must be inserted in addition • c = 3 o C=o and turned No printout! (for compartment addresses X and Y)
4. Enter compartment address Selected address is of basic key by means of printed keyboard or perforated tape
5. Enter key number, basic key Key number and check word and CR or check word by are printed means of keyboard or per forated tape No printout of basic key!
6. Press Carriage Return key INSERT is printed (only if a further basic key is to be entered)
V V 7. Remove and store away o=3 Q C==o physical keys S1 and S2
8. Press Off button Lamp goes dark V II2L Note: If the basic key is entered by way of perforated tape, the reader must be started several times.
Zust.: 4 3-1 A22713-A1000-Y1-*-7619 PREPARATION OF PERFORATED TAPE FOR BASIC KEYS
V 1. Operate Off-line button Lamp comes on I Ein EH I Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
V 2. Operate PLAIN button Lamp PLAIN comes on
PLAIN Paper is advanced by one line
3. Operate punch On/Off Lamp comes on 0H button
4. Hold Tape Feed-out button depressed until several LTRS code combinations (5 x hole) have been punched
5. Enter address of basic key Selected address is printed compartment by means of and punched keyboard
6. Look up key number, basic Key number, basic key and key and check word of key check word are printed list and enter by means of and punched keyboard
Zust.: 4 3-1A A22713-A1000-Y1-*-76l 9 7. Hold Tape Feed-out button depressed until several LTRS code combinations (5 x hole) have been punched
-
8. Operate Carriage Return key INSERT is printed The next basic key can now be processed
9. Tear off tape upwards
V 10. Operate PLAIN button Lampe PLAIN goes dark
PLAIN 11. Operate Off button Lamps in Off-line button V and punch On/Off button | E1EDEBI go dark Note: LF and CR may not occur in the text. The individual basic keys must be clearly separated by LTRS code combinations. Punch basic keys into a colored, durable tape.
Zust.: 4 3-1B A22713-A1000-Y1-*-76l 8 3.2 Enciphering, using the buffer V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line postion
Paper is advanced by one line
Internal illumination is V turned on 2. Operate PROC button Lamp PROC lights up PROC Paper is advanced by one line
SELECT is printed
V 3. Operate M. P. button Lamp M.P. lights up
M.P. 4. Enter address of basic key Key compartment address, compartment by means of number of key and check keyboard word are printed CR and 15 x LF are carried out
V 5. Press ENCI button Lamp ENCI comes on Lamp PROC goes out ENCI 10 slants III HUH I are printed
6. Enter text by means of Text is printed in plain keyboard or tape reader form
V 7. Operate PROC button Lamp ENCI goes dark 10 slants 11IIII III I are PROC printed
Note: When the message memory is full, 10 slants 1111111111 are automatically printed
Zust.: 5 3-2 A22713-A1000-Y1-*-7618 8. Output of enciphered Transmission (see message S e c t i o n 4 - 2 ) o r punching into tape (activate punch and operate OUTPUT button)
V 9. Operate M. P. button Lamp goes dark
M.P. V 10. Operate off button Lamp goes dark
3.3 Enciphering without buffer
V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
V 2. Operate PROC button Lamp PROC lights up
PROC Paper is advanced by one line
The word SELECT is printed
3. Enter address of basic The address of the basic key compartment by key compartment, the number means of keyboard of the key and the check word are printed CR and - 15 x LF are carried out
4. Press On/Off button of Lamp lights up ©• punch
Zust. 3-3 A22713-A1000-Y1-*-76l8 V 5. Press ENCI button Lamp ENCI lights up Lamp PROC goes dark ENCI ZZZZZ and the message key are printed and punched
6. Enter text by means of Text is printed in enciph keyboard or tape reader ered form and punched
V 7. Operate PROC button Lamp ENCI goes dark Termination of message: PROC - the last character group is filled up to 5 cha racters,, and - ZZZZZ - BT - number of character groups - 2 x CR, 8 x LF, NNNN and 12 x LTRS are printed and punched
8. Press Off button The lamps in the Off-line V button and in the On/Off button of the punch go EICDEBI . out
Note: Off-line operation is interrupted by an incoming message. The enciphering process must be started again from the beginning.
3.4 Deciphering, using the buffer
1. Operate Off-line button Lamp comes on I V Printer carriage moves to isiMisai beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
Zust.: 3 3-4 A22713-A1000-Y1-*-7618 2. Operate DECI button Lamps DECI and M.P. lit V V and M. P. button Paper is advanced by one DECI M. P. line
3. Enter crypto text by means of keyboard or tape reader (reader stops after 11th character group and must be started again):
T1000 CA is able Keyboard is not locked out to decipher and/or reader can be started
Te x t i s p r i n t e d o u t i n enciphered form
T1000 CA is able to Lamp CORR is lit decipher Keyboard is not locked out and reader can be started Te x t i s p r i n t e d i n e n c i p h e r e d f o r m ( f o r a d d i t i o n a l functions see Section 5-3)
- T1000 CA can decipher Lamp CORR flashes rapidly only when key S2 has and warning signal sounds
been inserted and //l\S. turned: Keyboard and reader are locked out
Basic key loaded in com partment X or Y
V Insert key S2 and turn it Lamp CORR goes dark c = J Q C = o Keyboard and reader are unlocked
Continue to enter text Te x t i s p r i n t e d o u t i n by means of keyboard or enciphered form reader
- T1000 CA is unable to Lamp CORR flashes slowly decipher (no basic and warning signal sounds k e y a v a i l a b l e ) Ix7l\\| ^ Keyboard and reader are locked out
The number of the key is printed if compartment Z c o n t a i n s t h e c o r r e c t " Z " - key
Zust.: 3 3-5 A22713-A1000-Y1 -*-761 8 V 4. Press OUTPUT button Lamp OUTPUT is lit The deciphered text is OUTPUT printed
Lamp OUTPUT extinguished
5. Operate DECI and M. P. Lamp M.P. and DECI go out V V buttons
M. P. DECI V 6. Depress Off button Lamp goes dark El I 0HH 3.5 Deciphering without buffer
Y~7 1. Operate Off-line button Lamp comes on
Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on V 2. Press DECI button Lamp DECI is lit Printer carriage moves to DECI beginning-of-line position
3. Enter crypto text by means of keyboard or tape reader:
- T1000 CA is able to The deciphered text is decipher printed - T1000 CA is able to Lamp CORR lit in the event decipher of format errors
Printout of the deciphered t e x t i s e r r o r e d
T1000 CA can decipher Lamp CORR flashes only when key S2 has rapidly and the warning been inserted and signal sounds \\i//- turned: //r\"s Keyboard and reader are locked out
Basic key contained in key compartment X or Y
Zust.: 3 3-6 A22713-A1000-Y1 -*-7618 V Insert and turn key S2 Lamp CORR goes dark c=d O C=o The text in the crypto- memory is printed
Keyboard and reader are unlocked
Continue to enter The deciphered text is crypto text by means of printed the keyboard or the tape reader - T1000 CA is not able Lamp CORR flashes to decipher slowly and warning signal (basic key not avail s o u n d s i s w / i / s able) |x7i\x| h* The number of the key is printed when compartment Z c o n t a i n s t h e c o r r e c t "Z"-key
V 4. Operate DECI button Lampe DECI goes dark
DECI V 5. Depress Off button Lamp goes dark
Zust, 3-7 A22713-A1000-Y1-*-761 9 3.6 Plain text
V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line position
Paper is advanced by one line
< Internal illumination lit
. V 2. Depress PLAIN button Lamp PLAIN lit Paper is advanced by one PLAIN line
3. Enter text by means of Text is printed keyboard or tape reader
V 4. Operate PLAIN button Lamp PLAIN goes dark
PLAIN .
5. Operate Off button V Lamp goes dark ■ annual
Zust.: 4 3-8 A22713-A1000-Y1-*-761 9 3.7 Preparation of a perforated tape
V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
V 2. Operate PLAIN button Lamp PLAIN is lit Paper is advanced by one PLAIN line
3. Operate punch On/Off Lamp is lit o< button
4. Hold Tape Feed-out button depressed until several LTRS code combinations (5 x hole) have been punched
Zust.: 3 3-9 A22713-A1000-Y1-*-761 9 5. Operate New Line key Printer carriage moves to or beginning-of-line position
Paper is advanced by one ■ line
Command for New Line signal is punched or
and Operate Carriage Return and Line Feed keys
6. Enter text by means of Text is punched and keyboard printed
7. Hold Tape Feed-out button depressed until the LTRS code combination (5 x hole) has been repeatedly punched
8. Tear off tape upwards
Zust.: 3 3-10 A22713-A1000-Y1-*-7619 V 9. Operate PLAIN button Lamp PLAIN goes dark
PLAIN 10. Depress Off button The lamps in the Off-line button and in the On/Off V button of the punch go aim E dark O ff - l i n e o p e r a t i o n i s i n t e r r u p t e d b y a n i n c o m i n g message. The telex mode is activated. Punch disconnects when the Punch Standby button is not depressed.
Note: After each actuation of the Tape Feed-out button, the corresponding Shift key £ J or | | must be pressed before further text entry by means of the keyboard.
3.8 Verification of a perforated tape
1. Operate Off-line button L a m p i s l i t
V Printer carriage moves to ■ anisai beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on V 2. Operate PLAIN button Lamp PLAIN is lit
PLAIN
3. Swing tape retainer lid upwards
4. Insert perforated tape Observe direction of tape and press it downwards feed
Close tape retainer Two rows to the left and lid again t h r e e r o w s t o t h e r i g h t o f the feed hole row
The pins of the sprocket wheel must engage in the feed holes
Zust.: 4 3-11 A22713-A1000-Y1 -*-761 9 5. Operate On/Off button Lamp comes on of tape reader Tape is read and its contents printed
V 6. Operate PLAIN button Lamp PLAIN goes dark
PLAIN V 7. Depress Off button Lamp goes dark a me
3.9 Duplication of a perforated tape
V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
2. Operate PLAIN button Lamp PLAIN is lit
3. Depress On-Off button Lamp lights up ©' of tape punch
Zust.: 3 3-12 A22713-A1000-Y1-*-76l9 4. Open tape retainer lid
5. Insert perforated tape Observe direction of tape and press it down feed
Close tape lid again Two rows of perforations at the left and three rows at the right of the feed hole row
Make sure that the pins of the sprocket wheel engage the feed holes
il/ 6. Operate On/Off button Lamp lit of tape reader Tape is read, the text is printed, and a new tape is punched
7. Hold Tape Feed-out button depressed until several LTRS code combinations have been punched
■
Note: If a second message follows the first, press buttons B and J | on the keyboard to seperate the messages until several LTRS code combinations have been punched
Zust.: 4 3-13 A22713-A1000-Y1-*-7619 8. Tear the tape off by pulling it upwards
V 9. Operate PLAIN button Lamp PLAIN goes dark
PLAIN
10. Depress Off button The lamps in the Off-line V button and in the punch ii .OH On/Off button go dark
3.10 Correction of a perforated tape by overpunching
1. Wrong character keyed here
I i e r n e b s 8 m u 2. Wrong character detected here
*
>i • • • • • • • • • • >•••'•*\. • • *••*••••• • •• ^ • • i i t i 3. Counting the character spaces from
Result: 9 character spaces
Zust.: 3 3-14 A22713-A1000-Y1-*-76l9 4. Depress Backspacing button 9 times Note: using the New Line key for shifting to the next line:B
Depress Backspacing button 3 times Using the CR and LF keys: B U Depress Backspacing button twice
5. Depress LTRS key 9 times
6. Enter the correct character, repeat the subsequent text and then continue with the new text
3.11 Correction of a perforated tape by duplication
1. Open tape retainer lid
2. Insert perforated tape Observe direction of tape and press it down feed
Close retainer lid again Two rows of perforations to the left and three rows to the right of the feed holes
Make sure that the pins of the sprocket wheel engage the feed holes
Zust.: 3 3-15 A22713-A1000-Y1-*-761 9 V 3. Operate Off-line button Lamp comes on ■ anisai Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
4. Operate PLAIN button Lamp PLAIN is lit
5. Depress punch On/Off Lamp is lit o< button (not necessary when the Punch Standby button EH is operated)
11/ 6. Depress On/Off button Lamp is lit of tape reader Tape is read, text is transmitted and printed
Character-by-character tape feed:
Briefly touch On/Off button of reader and
Depress button again several Tape reader stops characters ahead of the first unwanted character
7. Briefly depress On/Off button of tape reader as often as required (character-by-character feed-out) until the last desired character has been printed.
Zust, 3-16 A22713-A1000-Y1-*-7619 8. Operate punch On/Off Lamp goes dark button Tape feed is stopped
9. Briefly depress On/Off button of reader repeatedly until the last unwanted character has been read
10. Operate punch On/Off Lamp comes on on button
11. Enter the correct cha racters on keyboard
12. Operate On/Off button Reader continues to read of tape reader the tane
V 13. Depress PLAIN button Lamp PLAIN goes dark
PLAIN
14. Operate Off button The lamps in the Off-line V button and in the punch ■accusal On/Off button go dark Punch remains activated when the Punch Standby button has been depressed
Zust.: 4 3-17 A22713-A1000-Y1-*-76l9 LINE-CONNECTED MODE
The selection procedures may vary depending on the exchange (EDS or TWK) involved.
4.1 Transmission of an enciphered message from the tape
1. Open tape retainer lid
2. Insert perforated tape Observe direction of and press it down tape feed
Close lid again Two rows on the left and three rows on the right of the feed hole track
The pins of the sprocket wheel must engage in the feed holes
3. Operate line button L a m p i s l i t o or V Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
4. Keyboard the call number Subscriber call number is of the desired subscriber transmitted and simultan without making pauses e o u s l y p r i n t e d
With a machine connected to an electronic data switch ing system (lamp [P* lis lit), add a "+" and wait until t h e i d e n t i fi c a t i o n c o d e o f t h e d i s t a n t s u b s c r i b e r h a s been printed ■
Zust.: 4 4-1 A22713-A1000-Y1-*-7619 5. Connection is established Lamp is lit Long tone signal 4 Lamp goes dark [51
Subscriber busy Lamp lights up briefly | Q- Short audible signal £.
Lamp goes dark
Repeat selection process after three seconds
6. Depress Who-are-you ? key Identification code of d i s t a n t s u b s c r i b e r i s printed
Omitted in electronic data switching systems I d e n t i fi c a t i o n c o d e i s a u t o m a t i c a l l y p r i n t e d
7. Depress Here-is key Local identification code i s t r a n s m i t t e d a n d p r i n t e d
8. Operate New Line key Printer carriage moves to beginning-of-line position or
or ■
and Depress the Carriage Paper is advanced by one Return and Line Feed keys line
Ml 25> 9. Operate On/Off button Lamp is lit of tape reader The enciphered text is read, printed and transmitted
After 15 character groups See plain text transmission the pedal need no longer using the pedal be actuated (Section 6.5)
Zust.: 4 4-2 A2271 3-A1 000-Y1-*-76l9 10. Depress Who-are-you? key The identification code of t h e d i s t a n t s u b s c r i b e r i s printed once more for check ing purposes
11. Depress Off button Lamp goes dark ra 1o-
4.2 Transmission of an enciphered message from the cryptomemory
0 1. Operate Line button L a m p i s l i t or V Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
2. Keyboard the call number The call number of the sub of the desired subscriber s c r i b e r i s t r a n s m i t t e d a n d without making pauses simultaneously printed
With a machine connected to an electronic data switch i n g s y s t e m ( l a m p l O ^ i s l i t ) , a d d a " + " a n d w a i t u n t i l i d e n t i fi c a t i o n c o d e o f t h e d i s t a n t s u b s c r i b e r h a s b e e n printed
3. Connection is established L a m p i s l i t
Long tone signal 4
Lamp goes dark [51
Subscriber is busy Lamp lights up briefly \Q Short audible signal Q
Lamp goes dark
Call again after three seconds
Zust.: 4 4-3 A22713-A1000-Y1-*-76l9 4. Depress Who-are-you ? key Identification code of the d i s t a n t s u b s c r i b e r i s p r i n ted
Omitted in electronic data switching systems I d e n t i fi c a t i o n c o d e i s a u t o m a t i c a l l y p r i n t e d
5. Depress Here-is key The local identification code is transmitted and printed
6. Depress New Line key Printer carriage moves to or beginning-of-line position or
and Depress the Carriage Paper is advanced by one Return and Line Feed keys line
V 7. Operate OUTPUT button Lamp OUTPUT comes on The enciphered text is OUTPUT printed and transmitted
Lamp goes dark
8. Depress Who-are-you ? key The identification code of t h e d i s t a n t s u b s c r i b e r i s printed once more for check ing purposes
V 9. Operate Off button Lamp goes dark o-
Zust.: 4 4-4 A22713-A1000-Y1-*-761 9 4.3 Transmission of plain text
0 1. Operate Line button L a m p i s l i t V or ESI Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
2. Keyboard the call number Subscriber number is trans of the desired subscriber mitted and simultaneously without making pauses printed
With a machine connected to an electronic data switch i n g s y s t e m ( l a m p Q Q ^ j i s l i t ) , a d d a " + " a n d w a i t u n t i l the identification code of the distant station has been printed
3. Connection is established L a m p i s l i t
Long tone signal
Lamp goes dark
Subscriber is busy Lamp lights up briefly i O
Short audible signal 4^
Lamp goes dark
C a l l a g a i n a f t e r t h r e e seconds
4. Operate Who-are-you ? key The identification code of t h e d i s t a n t s u b s c r i b e r i s printed
Omitted in electronic data switching systems I d e n t i fi c a t i o n c o d e i s a u t o m a t i c a l l y p r i n t e d
Zust.: 4 4-5 A22713-A1000-Y1 -*-76l 9 5. Depress Here-is key Local identification code i s t r a n s m i t t e d a n d p r i n t e d
6. Depress New Line key Printer carriage moves to or beginning-of-line position or
Depress Carriage Return Paper is advanced by one and and Line Feed keys line
7. Enter the text by means Te x t i s t r a n s m i t t e d a n d of the keyboard or the printed tape reader
8. Depress Who-are-you ? key Identification code of d i s t a n t s u b s c r i b e r i s printed
V 9. Operate Off button L a m p g o e s d a r k K S 9
Options:
An outgoing message may also be punched into tape.
With the connection set up, operate the punch On/Off button (not required if Punch Standby button EH is depressed).
The punch is deactivated by operating the Off button unless the Punch Standby button is depressed EH .
Zust.: 4 4-6 A22713-A1 000-Y1-*-7619 4.4 Operation over dedicated circuits -' .. o 1. Operate Line button Lamp is lit
V Printer carriage moves to ElHEsai beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
2. Depress New Line key Printer carriage moves to beginning-of-line position or Paper is advanced by one line
or
Depress Carriage Return and and Line Feed keys
3. Enter text by means of Text is transmitted and keyboard or tape reader printed
V 4. Depress Off button Lamp goes dark or
Teleprinter is shut down automatically 32 s, 64 s, or 8,5 minutes after transmission of the last character (dependent on line interfacing equipment)
Zust. 4-7 A22713-A1000-Y1-*-761 9 4.5 Reception of a teleprinter message
Reception of a teleprinter message is possible at any time. With button EH depressed, all telegraph signals are printed and punched. In an unattended station this button and the DECI button should always be depressed so that messages that cannot be deciphered (e.g. SPECAT messages) are available also in perforated tape form.
4.6 Reception of enciphered text
1. Depress DECI and Standby condition V V Punch Standby buttons
DECI 2. Incoming call Lamps are lit 0- Lamp DECI lit
Audible signal
Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
3. Teleprinter message is received:
- Basic key in one of The deciphered text is the compartments A-W printed and punched
Basic key in compart The crypto text is printed ment X or Y and punched and may be sub (SPECAT) sequently deciphered in a second step (e.g. decipher ing without buffer).
Zust.: 4 4-8 A22713-A1000-Y1-*-761 9 - Basic key not in com The crypto text is printed partments and punched. If compartment Z contains the correct "Z" basic key, the key number may be deciphered in a second step (e.g. decipher ing without buffer)
EB 4. End of reception Lamps go dark Kl Lamp DECI goes dark
Audible signal
4.7 Reception of plain text
V V 1. Depress DECI and Standby condition Punch Standby buttons DECI 2. Incoming call Lamps are lit ©• Lamp DECI lit Audible signal
Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
3. Message is received The text is printed and punched
4. End of reception Lamps go dark
Lamp DECI goes dark
Audible signal 4^
Zust.: 4 4-9 A22713-A1000-Y1-*-7619 5 O P T I O N S
5.1 Function of CORR button
The correction CORR button permits: - character-by-character correction of the entered text in the M.P. mode (using the buffer) - indication of format errors (steady illumination)
- indication of lack of basic key (slow flash and warning signal)
- indication of enciphering under special conditions SPECAT (rapid flash and warning signal)
5.2 Correction during input for enciphering, using the buffer
Correction of the entered plain text is possible in the operating modes Procedure (PROC), Enciphering (ENCI) and Post Scriptum (P.S.).
When a typing error occurs, the characters last entered may be erased in dividually. The erased character is printed. Characters entered after the wrong character must be deleted individually together with the wrong charac ter by repeatedly depressing the CORR button. Input of the text may then be continued.
Text entered on the Plain text printout: keyboard: M I S T K A E MISTAKE
P r e s s C O R R b u t t o n P r i n t o u t : E A K three times
K e y i n A K E P r i n t o u t : A K E
The cryptomemory now contains the corrected word MISTAKE
Zust.: 4 5-1 A22713-A1000-Y1-*-7619 5.3 Correction during input for deciphering, using the buffer
The T1000 CA is also capable of deciphering mutilated crypto messag "- Format errors (incomplete 5-character groups, no spaces between the groups and miss ing carriage return or line feed) may be corrected so that major errors may be avoided during the deciphering process. The corrections required are car ried out in the operating mode "Deciphering, using the buffer".
V 1. Operate Off-line button Lamp comes on Printer carriage moves to beginning-of-line position
Paper is advanced by one line
Internal illumination is turned on
2. Depress DECI and M. P. Lamps DECI and M.P. are V V buttons lit
DECI M.P. Printer carriage moves to beginning-of-line position
3. Open tape retainer lid
4. Insert the perforated tape Observe direction of tape containing the mutilated feed crypto message Two rows on the left and three rows on the right of the feed hole track Close retainer lid The pins of the sprocket wheel must engage in the feed holes '
Zust. 5-2 A22713-A1000-Y1 -*-761 9 5. Operate On/Off button Lamp comes on 2S> of tape reader Reader stops after the 11th character group
6. Press On/Off button The crypto text is printed of tape reader again and transferred into the cryptomemory
7. Format error Lamp CORR comes on
Warning signal sounds Q
Tape reader stops
8. Enter the format- Lamp CORR goes dark correcting character (fill group up to 5 characters, insert a space, key in carriage return or line feed)
9. Depress On/Off button The crypto text is printed of tape reader again
V 10. Operate OUTPUT button Lamp OUTPUT lights up | The plain text is printed OUTPUT Lamp OUTPUT goes dark |
V 11. Operate Off button Lamp goes dark ■ aCCEBI
Zust.: 4 5-3 A22713-A1000-Y1-*-7619 5.4 Plain text inserted ahead of message - In the operating modes "Enciphering with or without buffer" it is possible to insert plain text ahead of the crypto text.
After selection of the key compartment address and printout of this address, of the key number and of the check word, the plain text is placed ahead of the enciphered text, using either the keyboard or the tape reader:
1. Enter the address of Key compartment address, the key compartment number and check word are printed 15 x LF, CR are carried out
2. Enter plain text by means P l a i n t e x t i s p r i n t e d of keyboard or tape reader
V 3. Operate ENCI button Lamp ENCI comes on Lamp PROC goes dark ENCI P r i n t o u t a n d f u r t h e r o p e r ■ ations depend on the oper ating mode selected
5.5 Plain text added at end of message
In the operating modes "Enciphering with and without buffer" it is possible to add plain text after the crypto text, ahead of the end-of-message signal NNNN.
The plain text can be added by terminating the enciphered text with the aid of the P.S. button:
V 1. Operate P.S.button L a m p P. S . i s l i t Lamp PROC is lit P.S. Lamp ENCI goes dark
Without buffer Printout: Two more 5-character groups and CR, LF, BT, CR, LF, GR... (group), CR, LF are carried out With buffer 1 0 s l a n t s / / / / / / / / / / are printed
Zust.: 3 5-4 A22713-A1000-Y1-*-7619 2. Enter plain text by means Plain text is printed of keyboard or tape reader
V 3. Operate PROC button Lamp PROC goes dark Lamp P.S. goes dark PROC Without buffer Printout: CR, 8 x LF, NNNN With buffer No printout
If the added plain text is to be printed out after deciphering at the re ceiving end, at least 8 x must be keyed after pressing the P.S. button and ahead of plain text input. This procedure is only possible in the line-connected mode.
5.6 Function of Zeroizing button
Operation of the Zeroizing button causes the contents of the cryptomemory and of all key compartments to be erased.
The Zeroizing button has another function:
In the event of a power outage, the storages are supplied from an emergency battery. This battery can be disconnected with the Zeroiz ing button and this results in the cancelling of the contents of all storages.
5.7 Battery drain indicator
When the commercial power fails, a battery prevents the contents of the cryp tomemory and of the key compartments from being cancelled. As long as the storages are supplied from this emergency power source, the red battery drain indicator is lit. This indication is deleted by depressing the Zeroizing button.
5.8 Break-in procedure
Tape transmissions can be interrupted from the distant station by the re peated operation of key Q or key Q .
Zust.: 5 5-5 A22713-A1000-Y1-*-7619 VARIANT-DEPENDENT FUNCTIONS
Specific customer requirements can be met by selecting the related functions with the aid of straps.
6.1 Manual loading of message key
After selecting the address of the basic key compartment and pressing key I | , the enciphering procedure can be continued (see sections "Encipher ing with and without buffer"). After selection of the key compartment address and operation of the "/" key, the basic setting, from which the message key can be generated, can be obtained by keying 10 optional characters.
1. Depress key A Printout: A.
Key number (A)
Check word (A)
2. Depress key "/" (slant) Printout: /
3. Key any 10 letters Printout: The 10 selected letters 15 x LF, CR
Then continue with enciphering process as described in Sections 3.2 and 3.3'
Zust.: 4 6-1 A22713-A1000-Y1-*-7619 6.2 Page information
After addressing the key compartment and after the automatic printout: PAGE 1, an optional designation (title, etc.) consisting of a maximum of 17 characters (LTRS and FIGS are each one character) may be entered. This des ignation appears at the beginning of every new page.
1. Operate the A key Printout: A
Key number (A) Check word (A)
CR, LF PAGE 1
2. Enter designation of a Printout: the selected maximum of 17 characters designation
3. Depress Carriage 15 x LF, CR Return key
6.3 Omitting NNNN at end of message
With the basic version of the teleprinter each message is automatically ter minated with the character sequence NNNN.
If the related strap is omitted, NNNN will not be generated.
6.4 Loading plain text into the memory, using the pedal
Entering plain text into the memory after selection of the key compartment address or operation of the P.S. button (see Sections 5.A and 5-5) is only possible if the pedal is actuated approximately every three seconds.
ZUst.: 4 6-2 A22713-A1000-Y1-*-761 9 6.5 Plain text transmission, using the pedal
For plain text transmission in connection with the pedal, the establishment of a connection (subscriber call number, Who-are-you? and Here is...), plain text transmission by means of the keyboard or the tape reader, and the sub sequent exchange of identification codes is only possible if the pedal is actuated every three seconds.
Note:
tfhen an enciphered message is being transmitted by means of the tape reader (see Section 4.1), the pedal must be operated only during the first 1.5 charac ter groups.
Zust.: 4 6-3 A22713-A1000-Y1-*-76l9 7 REPLACING THE PAPER ROLL
If a colored stripe appears on the edge of the paper, the paper roll must be replaced before the next message is sent or received
Open the top cover Swing the paper deflec tion frame to the front
2. Move paper pressure lever backwards Remove the old paper roll and pull the rest of the paper backwards and out Pull paper roll axle out of the old roll
For mobile use only: Unlatch paper roll axle on both sides
Push the paper roll axle The paper must unwind as into the new paper roll shown in the picture until it makes contact with the wire clip The wire clip always rests in the outermost groove
Load the new paper roll Ring-shaped collar must into the holder always rest in the groove (Latch up the paper roll of the left-hand roll when the teleprinter is holder in mobile use)
Zust.: 3 7-1 A22713-A1000-Y1-*-7619 5. Feed the paper over the pull relief rod and insert it under the platen
Swing the paper pressure lever to the front
Swing the paper pressure rod upwards
Wind the paper around the platen and feed it under the paper pressure rod
Swing the paper pressure rod downwards
6. Tear off paper along the tear-off edge Close top cover
Move paper deflecting frame backward"
Zust.: 3 7-2 A22713-A1000-Y1-*-7619 8 ADJUSTING THE LINE SPACING, PRINT FORCE AND TELEGRAPH SPEED
1. Open the top cover
Swing the paper deflection frame to the front
2. Line spacing
1 : single line spacing
1,5'. 1 1/2 line spacing
2: double line spacing
3. Print force
Left position of lever: single copy (no carbon copy)
Right position of lever: up to four copies (up to three carbon copies)
4. Telegraph speed
50 bauds lever to the left
75 bauds lever in center position
100 bauds lever to the right
Zust.: 4 8-1 A22713-A1000-Y1-*-7619 9 REPLACING THE PAPER TAPE ROLL
When the colored warning stripe becomes visible while the tape is being unwound, the paper tape roll must be changed before the next message is sent or received
1. Swing guide rod upwards
Tear off paper tape
Remove the old tape roll from core
Press the Tape Feed-out button until the rest of the paper has run out of the tape punch
3. Place the new paper tape The tape must unwind as r o l l o v e r c o r e s h o w n i n t h e p i c t u r e
Swing guide rod back into position
4. Advance paper tape in the tape punch until it has reached the beginning of the tape guide
Open the cover Press down on tape gate The tape gate swings up wards
Zust, 9-1 A22713-A1000-Y1-*-7619 5. Push the tape further until it emerges from the punch at the front
Press down on the tape The tape gate latches gate The tape is automatically fed forward by 32 spaces and punched (5-hole combinations)
Close the cover
Tear off punched tape upwards
Pull chad waste box out to the front or sideways and empty (Do this every time the tape roll is changed)
Zust.: 3 9-2 A22713-A1000-Y1-*-7619 10 REPLACING THE INK RIBBON
1. Open top cover
Swing paper deflecting frame to the front
2. Press the lever backwards and swing the printing mechanism up until it latches
Press lever in the direction of the arrow and pull ribbon spools off the guide pins. Remove ink ribbon from lateral guide and pull upwards and out of guide plate slot
4. Hook free ribbon end of new ribbon spool to an empty spool just as you do when replacing a typewriter ribbon spool. Place one ribbon spool in position. Ensure red side of ribbon points upwards. Insert ink ribbon in the first lateral guide on the ribbon guide fork, in the guide plate slot and the second lateral guide. Install second ribbon spool.
5. Press lever backwards Printing mechanism swings downwards and latches up
Tear paper off along the tear-off edge Close the top cover
Zust.: 3 10-1 A22713-A1000-Y1-*-76l9 11 REPLACING THE PRINT WHEEL
1. Open the top cover
Swing paper deflecting frame to the front
2. Press lever backwards and swing the printing mecha nism upwards until it latches
3. Disengage ribbon guide fork and swing upwards
4. Press down wire clip radially and pull off print wheel in the direction of the arrow
5. Push the new print wheel in until it locks in position (The driver must engage in the appropriate opening of the print wheel)
Zust.: 3 11-1 A2271 3-A1 000-Y1-*-761 9 C3= 6. Swing ribbon guide fork downwards Ribbon guide fork is locked in position
7. Push lever backwards The printing mechanism swings downwards and locks in position
8. Tear paper off along the tear-off edge
Close top cover
Zust.: 3 11-2 A22713-A1000-Y1-*-7619 12 CLEANING THE TELEPRINTER
If required, the exterior of the teleprinter can be cleaned
W h e n d u s t y : U s i n g d u s t c l o t h o r d u s t brush
When contaminated slightly: Using soapwater or washing- up liquids
When contaminated heavily: Using white spirit or FREON TF (manufacturer: Du Pont)
(Do not clean the see-through vision panel using cleaning agents containing white spirit or alcohol)
Zust.: 3 12-1 A22713-A1000-Y1-*-7619 13 FUNCTIONAL TEST WITH TEST TAPE •
Load printer paper and tape
Task: The essential functions of the crypto module are checked with a single perforated tape.
Testing aids: Test tape T1000 CA... (variant-dependent)
Procedure: ■
- LE: Insert test tape
- BET: P r e s s O ff - l i n e b u t t o n C T BET: Lamp CD lights
- GE: Press PLAIN button GB: Lamp in PLAIN button lights DR: LF
- LE: Press On/Off button LE: Operates ( a f t e r p r i n t o u t o f "KURZTESTT1000CA" DR: "KURZTESTT1000CA" stop the reader!) LE: Reader stops
GB: Press PLAIN button GB: Lamp PLAIN goes out
SZ: Insert and turn keys DR: INSERT 51 (INSERT) and 52 (SPECAT)
- LE: Press On/Off button LE: Operates DR: Z LE: Stops
LE: Press On/Off button LE: Operates DR: Key number (Z) Check word (Z) LE: Stops
LE: Press On/Off button LE: Operates DR: INSERT LE: Stops
LE: Press On/Off button LE: Operates DR: Y LE: Stops
LE: Press On/Off button LE: Operates DR: Key number (Y) Check wofd (Y) LE: Stops
- SZ: Turn back keys S1 and S2
Zust.: 4 13-1 A22713-A1000-Y1-*-7618 - GB: Press DECI button GB: DECI lamp lights DR: CR, LF
LE: Press On/Off button LE: Operates GB: Warning signal and flashing of lamp CORR LE: Stops
- SZ: Turn key S2 (SPECAT) GB: Lamp CORR goes dark DR: MASCHINE O. K. CR, LF Key number (Y) Check word (Y)
LE: Press On/Off button LE: Operates GB: Warning signal and slow flashing of lamp CORR DR: Key number (?)
GB: Press DECI button GB: Lamps DECI and CORR go dark
SZ: Turn back key S2
- BET: Press Off button Q BET: lampQ J goes dark
The key numbers (address) and check words (address) are variant-dependent. KURZTEST T 1000 CA 1.1 INSERT Z 99999 EJCOD INSERT Y 12345 IRSED
MASCHINE O.K.
12345 IRSED
00002
Printout: ^*i3 J S I Functional test for Arabic variant M i l l S > J i j l
VA1AA
V U A
Zust. 13-2 A22713-A1OOQ-Y1-*-7618 14 ORDERING DATA
Paper roll Roll as per DIN Std. 6720 Paper width: max. 250 mm Number of plies: max. 4 (when a multi-ply roll is used, make sure original is outermost ply)
Outside diameter of roll: max. 170 mm
Paper tape roll Ink ribbon 1. DIN ordering data 1. DIN ordering data Paper L1 DIN 6720 Ink ribbon SM 13x54 DIN 2103-N-sw 0.08 mm thick, unoiled) (nylon ribbon, black) or or paper L3 DIN 6720 ink ribbon SM 13x54 DIN 2103-N-sw/rt (0.1 mm thick, oiled) (nylon ribbon, black/red)
2. ISO ordering data 2. Data for ordering the ink Tape roll as per ribbon from Siemens AG: ISO Rec 1729 C22136-Z14-C967 Paper tape: (nylon ribbon, black) 17.4 mm wide or 0.1 mm thick C22136-Z14-C968 (nylon ribbon, black/red) 3. General ordering data without reference to DIN or ISO standards
Outside diameter of roll: Print wheel max. 210 mm Ordering data are stamped Inner diameter onto print wheel of core: 51 mm width of tape 17-4 mm thickness of tape 0.1 mm
Short test tape
Ordering number given on test tape P22713-U1000 *-55
Please address your orders to the nearest Siemens representatives
Zust.: 4 14-1 A22713-A1000-Y1-*-7619 wwwcrvptomuseum.comCrgplo Museum % ^^ Cmm&XfPm SIEMENS
•4
.
■
Weitergabe sowie Vervielfaltigung dieser Unterlage, Ver- Issued by wertung und Mitteilung ihres Inhalts nicht gestattet, soweit Ref. no. A22713-A1000-Y1 -5-7619 nicht ausdrucklich zugestanden. Zuwiderhandlungen ver- pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe Printed in the Federal Republic Bereich Fernschreib- und Datenverkehr sondere fiir den Fall der Patenterteilung oder GM-Eintragung. Postfach 700072, D-8000 Munchen 70 of Germany Telex 5 288-235 • Telefax (089) 7 22-63312 ©Siemens AG 1981 AG 03810.7 3/81 61204
Proprietary data, company confidential. All rights reserved. Confie a titre de secret d'entreprise. Tous droits reserves. Delivery subject to availability; SIEMENS AKTIENGESELLSCHAFT Comunicado como segredo empresarial. Reservados todos os direitos. .QoBepneTCH hsh npOH3Bo,acTBeHHbiM cenper. Bee npaBa coxpaHRrOTCR 3a hbmh right of technical modifications reserved Confiado como secreto industrial. Nos reservamos todos los derechos.