Environmental Health Risk Assessment—Guidelines

Total Page:16

File Type:pdf, Size:1020Kb

Environmental Health Risk Assessment—Guidelines Contents Figures .................................................................................................................................................................................. vi Tables ................................................................................................................................................................................... vii Objectives ............................................................................................................................................................................ viii Audience ............................................................................................................................................................................. viii Acknowledgments ................................................................................................................................................................. ix PART 1: BASIC CONCEPTS IN ENVIRONMENTAL HEALTH RISK ASSESSMENT ..................................................... 1 Chapter 1: Introduction to environmental health risk assessment .................................................................................................... 3 1.1 What is risk assessment? ............................................................................................................................................ 3 1.2 When to undertake risk assessment ........................................................................................................................... 4 1.3 Types of risk assessment ............................................................................................................................................ 5 1.4 The distinction between risk assessment and risk management .................................................................................. 6 1.5 Evaluating risk assessment methods ........................................................................................................................... 6 1.6 Risk assessment models and formats ......................................................................................................................... 7 1.7 The five stages of environmental health risk assessment (EHRA) ................................................................................. 7 1.8 Risk assessment frameworks ...................................................................................................................................... 9 1.9 Tiered approaches to EHRA ...................................................................................................................................... 12 1.10 Deterministic versus probabilistic estimates in EHRA ................................................................................................ 13 1.11 Environmental health risk assessment and health impact assessment ....................................................................... 14 1.12 Environmental health risk assessment and the ‘precautionary principle’ .................................................................... 14 Chapter 2: Problem formulation and scope .................................................................................................................................. 16 2.1 Identifying and describing issues within existing environmental conditions ................................................................. 16 2.2 Identifying and describing susceptible populations .................................................................................................... 17 2.3 Identification of potential exposure pathways............................................................................................................. 22 2.4 Potential interactions between agents ....................................................................................................................... 22 2.5 Identifying potential management options that may mitigate exposure ....................................................................... 23 2.6 What risk and other technical assessments are necessary to evaluate risk and discriminate between potential risk management options? .......................................................................................................................... 23 Chapter 3: Hazard identification and dose–response assessment .................................................................................................. 24 3.1 Introduction ............................................................................................................................................................. 24 3.2 Hazard identification................................................................................................................................................. 24 3.3 Dose–response assessment ...................................................................................................................................... 26 3.4 The prime role of animal studies in risk assessment .................................................................................................. 26 3.5 Dose scaling ............................................................................................................................................................. 26 3.6 Dose–response curve shape, construct and analysis ................................................................................................. 28 3.7 Hormesis ................................................................................................................................................................. 32 3.8 Dose–response modelling ......................................................................................................................................... 32 3.9 Benchmark dose approach....................................................................................................................................... 33 3.10 Threshold versus non-threshold responses in risk assessment .................................................................................. 36 3.11 Threshold versus non-threshold approaches – implications for risk assessment ......................................................... 39 3.12 Science policy and the selection of threshold and non-threshold models ................................................................... 40 ENVIRONMENTAL HEALTH RISK ASSESSMENT i Chapter 4: Exposure assessment ................................................................................................................................................. 42 Chapter 7: Reviewing and appraising an environmental health risk assessment report ................................................................... 95 4.1 Introduction ............................................................................................................................................................. 42 7.1 Problem formulation and scope ................................................................................................................................ 95 4.2 Terminology used in exposure assessment ................................................................................................................ 42 7.2 Hazard identification................................................................................................................................................. 95 4.3 Planning an exposure assessment ............................................................................................................................ 45 7.3 Dose–response checklist .......................................................................................................................................... 96 4.4 Development of a conceptual site model ................................................................................................................... 47 7.4 Selection of guideline values ..................................................................................................................................... 97 4.5 Approaches to quantifying exposures ........................................................................................................................ 50 7.5 Data presentation ..................................................................................................................................................... 97 4.6 Exposure assessment calculations ............................................................................................................................ 52 7.6 Exposure assessment ............................................................................................................................................... 98 4.7 Data analysis and evaluation ..................................................................................................................................... 53 7.7 Risk characterisation .............................................................................................................................................. 100 4.8 Individual exposure, dose and risk estimates............................................................................................................. 54 7.8 Confirmation of utility .............................................................................................................................................. 100 4.9 Issues in exposure assessments
Recommended publications
  • New Synthesis Routes for Production of Ε-Caprolactam by Beckmann
    New synthesis routes for production of ε-caprolactam by Beckmann rearrangement of cyclohexanone oxime and ammoximation of cyclohexanone over different metal incorporated molecular sieves and oxide catalysts Von der Fakultät für Mathematik, Informatik und Naturwissenschaften der RWTH Aachen University zur Erlangung des akademischen Grades eines Doktors der Naturwissenschaften genehmigte Dissertation vorgelegt von Anilkumar Mettu aus Guntur/Indien Berichter: Universitätprofessor Dr. Wolfgang F. Hölderich Universitätprofessor Dr. Carsten Bolm Tag der mündlichen Prüfung: 29.01.2009 Diese Dissertation ist auf den Internetseiten der Hochschulbibliothek online verfügbar. Dedicated to my Parents This work reported here has been carried out at the Institute for Chemical Technolgy and Heterogeneous Catalysis der Fakultät für Mathematik, Informatik und Naturwissenschaften in the University of Technology, RWTH Aachen under supervision of Prof. Dr. Wolfgang F. Hölderich between June 2005 and August 2008. ACKNOWLEDGEMENTS I would like to express my deepest sence of gratitude to my supervisor Prof. Dr. rer. nat. W. F. Hölderich for giving me the opportunity to do my doctoral study in his group. His guidance and teaching classes have allowed me to grow and learn my subject during my Ph.d. He has provided many opportunities for me to increase my abilities as a researcher and responsibilities as a team member. I am grateful for the financial support of this work from Sumitomo Chemicals Co., Ltd, Niihama, Japan (Part One) and Uhde Inventa-Fischer GmBH, Berlin (Part Two). Our collaborators at Sumitomo Chemicals Co., Ltd (Dr. C. Stoecker) and Uhde Inventa- Fischer GmBH (Dr. R. Schaller and Dr. A. Pawelski) provided thoughtful guidance and suggestions for each project.
    [Show full text]
  • Synthesis of Functionalized Polyamide 6 by Anionic Ring-Opening Polymerization Deniz Tunc
    Synthesis of functionalized polyamide 6 by anionic ring-opening polymerization Deniz Tunc To cite this version: Deniz Tunc. Synthesis of functionalized polyamide 6 by anionic ring-opening polymerization. Poly- mers. Université de Bordeaux; Université de Liège, 2014. English. NNT : 2014BORD0178. tel- 01281327 HAL Id: tel-01281327 https://tel.archives-ouvertes.fr/tel-01281327 Submitted on 2 Mar 2016 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Logo Université de cotutelle THÈSE PRÉSENTÉE POUR OBTENIR LE GRADE DE DOCTEUR DE L’UNIVERSITÉ DE BORDEAUX ET DE L’UNIVERSITÉ DE LIEGE ÉCOLE DOCTORALEDE SCIENCES CHIMIQUES (Université de Bordeaux) ÉCOLE DOCTORALE DE CHIMIE (Université de Liège) SPÉCIALITÉ POLYMERES Par Deniz TUNC Synthesis of functionalized polyamide 6 by anionic ring-opening polymerization Sous la direction de Stéphane CARLOTTI et Philippe LECOMTE Soutenue le 30 octobre 2014 Membres du jury: M. PERUCH, Frédéric Directeur de recherche, Université de Bordeaux Président M. HOOGENBOOM, Richard Professeur, Ghent University Rapporteur M. MONTEIL, Vincent Chargé de recherche, Université Claude Bernard Rapporteur M. YAGCI, Yusuf Professeur, Istanbul Technical University Examinateur M. AMEDURI, Bruno Directeur de recherche, Institut Charles Gerhardt Examinateur M. SERVANT, Laurent Professeur, Université de Bordeaux Invité Preamble This PhD had been performed within the framework of the IDS FunMat joint doctoral programme.
    [Show full text]
  • Influence of Ε-Caprolactam on Growth and Physiology of Environmental Bacteria
    Ann Microbiol (2013) 63:1471–1476 DOI 10.1007/s13213-013-0610-4 ORIGINAL ARTICLE Influence of ε-caprolactam on growth and physiology of environmental bacteria Nandita N. Baxi Received: 14 July 2012 /Accepted: 22 January 2013 /Published online: 24 February 2013 # Springer-Verlag Berlin Heidelberg and the University of Milan 2013 Abstract ε-Caprolactam was found to have an effect on Introduction ecologically important soil bacteria. It inhibited the growth of several Bacillus sp. and Rhizobium sp. but cells of Microbial activity in soil has numerous functions contribut- Arthrobacter sp. were able to grow in the presence of capro- ing to soil fertility. It is involved in organic nutrient cycles, lactam. Sphingomonas sp. lost its inherent capacity to produce the release of minerals and fixation of nutrients from the air, extracellular polymer (EPS) if grown in medium containing rendering nutrients more accessible and easily transportable caprolactam. In the case of raw domestic sewage, the diversity to plant roots, prevention of aggressive plant pathogens of native bacteria was diminished in presence of caprolactam. taking hold, improving the ability of plants to withstand Polluted sea water yielded predominantly one type of disease effects, the decrease of inorganic fertilizer loss caprolactam-degrading bacteria of the genus Achromobacter. through erosion and leaching, short-term immobilization, These cells efficiently utilized up to 10 g caprolactam/L as the and decrease of persistence of pesticides in soils. However, sole source of carbon and nitrogen in synthetic medium even the soil biological ecosystem (manifested both by microbial in the presence of 20 g NaCl/L. Compared to cells of and enzymatic activities) can be significantly impaired by Arthrobacter sp., cells of Achromobacter sp.
    [Show full text]
  • Green Chemistry Accepted Manuscript
    Green Chemistry Accepted Manuscript This is an Accepted Manuscript, which has been through the Royal Society of Chemistry peer review process and has been accepted for publication. Accepted Manuscripts are published online shortly after acceptance, before technical editing, formatting and proof reading. Using this free service, authors can make their results available to the community, in citable form, before we publish the edited article. We will replace this Accepted Manuscript with the edited and formatted Advance Article as soon as it is available. You can find more information about Accepted Manuscripts in the Information for Authors. Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content. The journal’s standard Terms & Conditions and the Ethical guidelines still apply. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains. www.rsc.org/greenchem Page 1 of 21 Green Chemistry Green Chemistry RSCPublishing CRITICAL REVIEW Catalytic Routes towards Acrylic Acid, Adipic Acid and ε-Caprolactam starting from Biorenewables Cite this: DOI: 10.1039/x0xx00000x Rolf Beerthuis, Gadi Rothenberg and N. Raveendran Shiju* Received 00th January 2012, The majority of bulk chemicals are derived from crude oil, but the move to biorenewable resources is Accepted 00th January 2012 gaining both societal and commercial interest. Reviewing this transition, we first summarise the types of today’s biomass sources and their economical relevance. Then, we assess the biobased productions DOI: 10.1039/x0xx00000x of three important bulk chemicals: acrylic acid, adipic acid and ε-caprolactam.
    [Show full text]
  • Caprolactam 99/00-4
    Caprolactam 99/00-4 March 2001 TABLE OF CONTENTS Page I EXECUTIVE SUMMARY - 1 - A. SYNOPSIS - 1 - B. TECHNOLOGY DEVELOPMENTS - 1 - 1. Enhancements to Conventional Technology - 2 - 2. Caprolactam from Alternative Sources - 2 - C. TECHNO-ECONOMICS - 5 - 1. Enhancements to Conventional Technology - 5 - 2. Routes Based on Butadiene - 5 - D. COMMERCIAL STATUS - 8 - 1. Consumption - 8 - 2. Supply/Demand Balance - 9 - 3. Trade - 9 - 4. Ammonium Sulfate - 10 - E. STRATEGIC ISSUES - 12 - 1. Cyclicality - 12 - 2. Nylon Feedstocks from One Source - 13 - F. NYLON RECYCLING - 14 - G. CONCLUSIONS - 15 - II INTRODUCTION - 16 - A. AIM OF THE STUDY - 1 - B. OVERVIEW - 17 - 1. Enhancements to Conventional Technology - 17 - 2. Caprolactam from Alternative Sources - 17 - C. CHEM SYSTEMS PRODUCTION COST METHODOLOGY - 20 - 1. Capital Cost Estimation - 20 - (a) Battery Limits Investment - 20 - (b) Off-Sites Investment - 21 - (c) Contractor Charges(2) Typically 15-25 Percent of Installed BL and OS Costs - 22 - (d) Project Contingency Allowance(2) - 22 - (e) Working Capital - 22 - (f) Other Project Costs(3) - 23 - (1) Start-Up/Commissioning Costs - 23 - (2) Miscellaneous Owner’s Costs - 23 - 2. Cost of Production Elements - 24 - (a) Battery Limits - 24 - (b) Production Costs - 25 - (1) Labor - 25 - TABLE OF CONTENTS (Continued) Page III CAPROLACTAM FROM AROMATIC-DERIVED FEEDSTOCKS - 26 - A. COMMERCIAL TECHNOLOGIES - 26 - 1. Overview - 26 - 2. Process Chemistry - 26 - (a) Cyclohexanone Synthesis - 26 - (b) Oxime Formation with Cyclohexanone Using Hydroxylamine
    [Show full text]
  • Extraction of Sulphuric Acid from Technological Solution of Hydroxylamine Sulphate
    EXTRACTION OF SULPHURIC ACID FROM TECHNOLOGICAL SOLUTION OF HYDROXYLAMINE SULPHATE SK96K0041 Maciej Wisniewski, Mariusz Bogumil Bogacki and Jan Szymanowski Poznan University of Technology, Institute of Chemical Technology and Engineering, PL M. Sklodowskiej Curie 2, 60-965 Poznan, Poland In chemical industry waste liquid streams contain often mineral acids alone or in the presence of various salts. The concentration of these acids can differ significantly. However, this concentration is usually too small to obtain commercially acceptable products. Thus, such streams are neutralised with lime and dumped. They are also neutralised with ammonia forming appropriate ammonium salts which are used as low quality fertilizers. Important amounts of ammonium sulphate are produced in caprolactam plants in Poland. Cyclohexanone is oximated with hydroxylamine sulphate and the obtained oxime gives caprolactam by Beckmann rearrangement carried out in concentrated sulphuric acid. Sulphuric acid is neutralised with ammonia to ammonium sulphate. Recovery of sulphuric acid from post reaction mixture is one of the main factors which could permit to improve the economy of the process. Sulphuric acid is also present in hydroxylamine sulphate solution. In Nitrogen Chemical Plants in Pulawy and Tarnow, Poland the hydroxylamine sulphate is obtained by catalytic hydrogenation of nitrogen(II) oxide earned out in the presence of sulphuric acid. Ammonium sulphate is formed as the by-product. The technological solution contains 305-315 g/dm^ hydroxylamine sulphate, 35-45 g/dnP sulphuric acid and 10-20 g/dm^ ammonium sulphate. The aim of this work is to study the recovery of sulphuric acid from such technological solution. Cyanex 923 which contains trialkyl phosphine oxide as the active substance is used for sulphuric acid extraction.
    [Show full text]
  • Agents Classified by the IARC Monographs, Volumes 1–123
    Agents Classified by the IARC Monographs, Volumes 1–123 1 CAS No. Agent Group0B Volume Year 026148-68-5 A-alpha-C (2-Amino-9H-pyrido[2,3-b]indole) 2B 40, Sup 7 1987 000083-32-9 Acenaphthene 3 92 2010 025732-74-5 Acepyrene (3,4-dihydrocyclopenta[cd]pyrene) 3 92 2010 000075-07-0 Acetaldehyde 2B 36, Sup 7, 71 1999 000075-07-0 Acetaldehyde associated with consumption of alcoholic 1 100E 2012 beverages 000060-35-5 Acetamide 2B 7, Sup 7, 71 1999 000103-90-2 Acetaminophen (see Paracetamol) Acheson process, occupational exposure associated with 1 111 2017 059277-89-3 Aciclovir 3 76 2000 Acid mists, strong inorganic 1 54, 100F 2012 000494-38-2 Acridine orange 3 16, Sup 7 1987 008018-07-3 Acriflavinium chloride 3 13, Sup 7 1987 000107-02-8 Acrolein 3 63, Sup 7 1995 000079-06-1 Acrylamide 2A 60, Sup 7 1994 (NB: Overall evaluation upgraded to Group 2A with supporting evidence from other relevant data) 000079-10-7 Acrylic acid 3 19, Sup 7, 71 1999 Acrylic fibres 3 19, Sup 7 1987 000107-13-1 Acrylonitrile 2B 71 1999 Acrylonitrile-butadiene-styrene copolymers 3 19, Sup 7 1987 000050-76-0 Actinomycin D 3 10, Sup 7 1987 023214-92-8 Adriamycin 2A 10, Sup 7 1987 (NB: Overall evaluation upgraded to Group 2A with supporting evidence from other relevant data) 003688-53-7 AF-2 [2-(2-Furyl)-3-(5-nitro-2-furyl)acrylamide] 2B 31, Sup 7 1987 001402-68-2 Aflatoxins (B1, B2, G1, G2, M1) 1 Sup 7, 56, 2012 82, 100F, 002757-90-6 Agaritine 3 31, Sup 7 1987 Alcoholic beverages 1 44, 96, 100E 2012 000116-06-3 Aldicarb 3 53 1991 000309-00-2 Aldrin (see Dieldrin, and aldrin metabolized to dieldrin) Aloe vera, whole leaf extract 2B 108 2016 000107-05-1 Allyl chloride 3 36, Sup 7, 71 1999 000057-06-7 Allyl isothiocyanate 3 73, Sup 7 1999 002835-39-4 Allyl isovalerate 3 36, Sup 7, 71 1999 Alpha particles (see Radionuclides) Aluminium production 1 34, Sup 7, 2012 92, 100F 000915-67-3 Amaranth 3 8, Sup 7 1987 1 Agents Classified by the IARC Monographs, Volumes 1–123 1 CAS No.
    [Show full text]
  • Caprolactam Product Stewardship Summary June 2009
    Caprolactam Product Stewardship Summary June 2009 Chemical Name: Caprolactam Chemical Category (if applicable) Cyclic amide Synonyms: ε-Caprolactam; 6-Caprolactam; 2-Perhydroazepinone, 2-Oxohexamethylenimine; 2-Ketohexamethylenimine; 6-Hexanelactam; Hexahydro-2-azepinone; Capron PK4; Aminocaproic lactam; 2H-azepin-1, hexahydro; Extrom 6N; Hexahydro- 2H-azepin-2-one; 1-Aza-2-cycloheptanone; 2-Azacycloheptanone; Cyclohexanone iso-oxime; and Hexahydro-2-azepinone CAS Number: 105-60-2 CAS Name: Caprolactam EC (EINECS) Number: 203-313-2 • Caprolactam is an essential chemical used in the manufacture of nylon 6 synthetic fibers. Nylon 6 fibers are used in the production of commercial and residential carpet, pharmaceutical and engineering plastics, and automobile plastics parts and housings. For more information on caprolactam, please visit our website. • Caprolactam is a High Production Volume (HPV) chemical produced at over 1,000,000 pounds annually and is listed by the United Nations Environmental Programme. • Workplace exposures to caprolactam during its manufacture, and when used as a chemical intermediate for production of other chemicals, are expected to be minimal because exposures to caprolactam dust are controlled with process enclosures, local exhaust ventilation, general dilution ventilation, and use of personal protective equipment. Workplace exposure limits have been established for use in worksite safety programs. Please see the MSDS for additional information. • Caprolactam is a solid, occurring as white flakes or crystals that will readily absorb moisture from the air. • Caprolactam is irritating to the eyes, skin, and respiratory tract. Repeated or prolonged contact may cause inflammation of the skin (e.g. a rash). Breathing caprolactam vapors and/or dust may irritate the membranes of the nose and throat, and it may cause reversible symptoms such as nausea, vomiting, dizziness and headache at high concentrations.
    [Show full text]
  • Process for the Preparation of a Caprolactam Precursor from Butadiene
    Europäisches Patentamt *EP001223155A1* (19) European Patent Office Office européen des brevets (11) EP 1 223 155 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: (51) Int Cl.7: C07C 45/50, C07C 51/235, 17.07.2002 Bulletin 2002/29 C07C 67/39, C07C 67/36, C07C 227/08, C07C 41/54, (21) Application number: 01200120.2 C07C 67/38 (22) Date of filing: 15.01.2001 (84) Designated Contracting States: • Smits, Hubertus Adrianus AT BE CH CY DE DK ES FI FR GB GR IE IT LI LU 6212 GC Maastricht (NL) MC NL PT SE TR • Spronken, Josephus Marie Hubertus Designated Extension States: 6241 BK Bunde (NL) AL LT LV MK RO SI • Wolters, Henricus Franciscus Wilhelmus 6101 BT Echt (NL) (71) Applicant: DSM N.V. • Boogers, Jeroen Antonius Franciscus 6411 TE Heerlen (NL) 6224 JK Maastricht (NL) • Gelling, Onko Jan (72) Inventors: 6129 HV Urmond (NL) • Sielcken, Otto Erik 6136 BG Sittard (NL) (54) Process for the preparation of a caprolactam precursor from butadiene (57) The invention relates to a process for the prep- presence of an alcohol resulting in a reaction mixture aration of a caprolactam precursor starting from butadi- comprising an acetal of pentenals. The invention further ene, whereby the process comprises a step in which relates to the preparation of methyl-3-pentenoate by ox- butadiene is hydroformylated into a mixture of pentenals idizing a pentenal and/or an acetal of pentenal contain- in the presence of carbon monoxide, hydrogen and a ing reaction mixture. hydroformylation catalyst. The invention also relates to a process in which butadiene is hydroformylated in the EP 1 223 155 A1 Printed by Jouve, 75001 PARIS (FR) EP 1 223 155 A1 Description [0001] The invention relates to a process for the preparation of a caprolactam precursor from butadiene.
    [Show full text]
  • Radiation Chemistry of Organic Solids
    Chapter 5 RADIATION CHEMISTRY OF ORGANIC SOLIDS Cornelia Vasile, Elena Butnaru “Petru Poni” Institute of Macromolecular Chemistry, Romanian Academy, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania 1. INTRODUCTION Radiation chemistry deals with chemical reactions produced by interactions of ionizing radiation with materials. The effects of radiation on matter depend on the type of the radiation and its energy level, as well as on the composition, physical state, temperature and the atmospheric environment of the absorbing material. The type and yield of the fi nal products produced by exposure of an organic compound to ionizing radiation are often dependent on its physical state (gas, liquid or solid) and its molecular structure [1]. The effects of radia- tion on organic solids (polymers, lignocellulosic materials, etc.) are an area of increasing interest. Ionizing radiation can modify the physical, chemical, and biological properties of polymers; the changes occurring when polymer mate- rials are in a solid state are different, as compared to chemical or thermal reac- tions carried out in melted polymers. After the interaction of ionizing radiation (gamma rays, X-rays, accelerated electrons, ion beams) with macromolecules, very reactive intermediates (primary entities, radicals and ions) are formed. These intermediates can follow several different reaction paths, that result in the formation of oxidized products, grafts, scissioning of main chains (degrada- tion) or crosslinking. The type and degree of these transformations depend on the structure of the material (e.g. polymer) and the treatment applied before, during and after irradiation [2]. 118 Applications of ionizing radiation in materials processing 2. PRIMARY AND SECONDARY EFFECTS Ionizing radiations can be classifi ed in three categories: • charged particles: electrons (e–), positrons (e+), and heavy ions; • photons: gamma (γ), X-rays and light; • neutrons (n).
    [Show full text]
  • Agents Classified by the IARC Monographs, Volumes 1–102
    Agents Classified by the IARC Monographs, Volumes 1–102 CAS No Agent Group Volume Year 026148-68-5 A-alpha-C (2-Amino-9H-pyrido[2,3-b]indole) 2B 40, Sup 7 1987 000083-32-9 Acenaphthene 3 92 2010 025732-74-5 Acepyrene (3,4-dihydrocyclopenta[cd]pyrene) 3 92 2010 000075-07-0 Acetaldehyde 2B 36, Sup 7, 71 1999 Acetaldehyde associated with consumption of alcoholic 000075-07-0 1 100E in prep beverages 000060-35-5 Acetamide 2B 7, Sup 7, 71 1999 000103-90-2 Acetaminophen (see Paracetamol) 059277-89-3 Aciclovir 3 76 2000 Acid mists, strong inorganic 1 54, 100F in prep 000494-38-2 Acridine orange 3 16, Sup 7 1987 008018-07-3 Acriflavinium chloride 3 13, Sup 7 1987 000107-02-8 Acrolein 3 63 1995 Acrylamide 000079-06-1 (NB: Overall evaluation upgraded to Group 2A with 2A 60 1994 supporting evidence from other relevant data) 000079-10-7 Acrylic acid 3 19, Sup 7, 71 1999 Acrylic fibres 3 19, Sup 7 1987 000107-13-1 Acrylonitrile 2B 71 1999 Acrylonitrile-butadiene-styrene copolymers 3 19, Sup 7 1987 000050-76-0 Actinomycin D 3 10, Sup 7 1987 Adriamycin 023214-92-8 (NB: Overall evaluation upgraded to Group 2A with 2A 10, Sup 7 1987 supporting evidence from other relevant data) 003688-53-7 AF-2 [2-(2-Furyl)-3-(5-nitro-2-furyl)acrylamide] 2B 31, Sup 7 1987 001402-68-2 Aflatoxins 1 56, 82, 100F in prep 006795-23-9 Aflatoxin M1 2B 56 1993 002757-90-6 Agaritine 3 31, Sup 7 1987 Alcoholic beverages 1 44, 96, 100E in prep 000116-06-3 Aldicarb 3 53 1991 000309-00-2 Aldrin 3 5, Sup 7 1987 000107-05-1 Allyl chloride 3 36, Sup 7, 71 1999 000057-06-7 Allyl isothiocyanate
    [Show full text]
  • Caprolactam Technical Data Sheet
    Technical Data Sheet High Performance Materials Caprolactam C6H11NO Applications Caprolactam is used for the production of fibers and filaments made of polyamide 6. Examples for end products of polyamide 6 are: clothing, carpets, ropes, fishing nets, molded plastic parts and packaging films. Engineering plastics like Durethan® or cast nylon (shaped as sheet, plates, pipes, cast or rotational molded parts) are another important market for caprolactam. It is also used in numerous special applications. Characteristics Value Unit Method Crystallization point ≥ 69 °C Sim. to ISO 7060 Moisture content ≤ 0.04 % (m/m) Karl Fischer titration (use in anionic polymerization) ≤ 0.01 % (m/m) Volatile bases ≤ 0.5 meq/kg Sim. to ISO 8661 Permanganate number ≥ 10,000 s Spectrophotometry (3% solution) Color of a 50% (by wt.) aqueous solution ≤ 5 APHA Sim. to ISO 8112 Content of free bases ≤ 0.1 meq/kg Titration Content of free acids ≤ 0.05 meq/kg Titration Absorbance at 290 nm ≤ 0.05 Sim. to ISO 7059 Cyclohexanone oxime content ≤ 5 mg/kg GC Iron content ≤ 0.5 mg/kg Spectrophotometry Ash content ≤ 5 mg/kg TGA Storage and shelf life Caprolactam is a very stable product and it does not lose its properties even after a long period of storage. There is no limiting shelf life, it can be stored for several weeks or months, provided it is stored as follows: Product Values Liquid Store in suitable tanks or containers from stainless steel or aluminum. All the elements of the storage and conveying systems must be grounded. Store in well isolated and tempered tanks or containers under nitrogen blanket.
    [Show full text]