Washing machine WM14Y892GB

siemens-home.com/welcome

HQ ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV Register your product online ens-home.com/welcome

Your new washing machine Display rules You have chosen a Siemens washing : Warning! machine. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation. Not heeding the warning can your washing machine. cause death or injuries. To meet the high quality demands Caution! required by Siemens, every washing This signal word indicates a possibly machine that leaves our factory is dangerous situation. Not heeding the carefully checked to ensure that it caution can cause property and/or functions correctly and is in perfect environmental damage. condition. For more information on our products, Note/tip accessories, replacement parts and Information about the optimum use of services, see our website www.siemens- the appliance/any other useful home.com or contact our after-sales information. service centres. 1. 2. 3. / a) b) c) If the operating and installation instructions describe different models, The steps are represented by numbers any differences will be pointed out at the or letters. relevant points in the text. ■ / - Lists are represented by a small box or a dash. Read these operating and installation instructions before switching on the washing machine.

2 en

ContentsenInstruction Manual and Installation Instructions

8 Intended use...... 5 \ Additional programme settings/ options ( Safety instructions ...... 6 (* depending on the model) . . . 25 Electrical safety...... 6 speedPerfect ( ...... 25 Risk of injury...... 6 ecoPerfect ¦...... 25 Safety for children...... 7 Pre-wash * ...... 25 Extra rinse * ...... 25 7 Environmental protection ...... 8 Water Plus * ...... 25 Less Ironing * ...... 26 Packaging/used appliance ...... 8 Soak * ...... 26 Tips on economical use ...... 8 Rinse Hold *...... 26 Y Main points in brief ...... 9 Silent Wash *...... 26 1 Operating the appliance ...... 26 * Getting to know the appliance 10 Preparing the washing machine . . . .26 Washing machine ...... 10 Switching on the appliance/ Control panel ...... 11 selecting a programme ...... 27 Display panel ...... 12 Change the programme default settings ...... 27 Z Laundry...... 14 Select additional programme Prepare the laundry ...... 14 settings ...... 27 Sorting laundry ...... 14 Placing laundry into the drum ...... 28 Measure and add detergent C Detergent ...... 15 and care products ...... 28 Correct selection of detergent . . . . . 15 Start the programme ...... 28 Saving energy and detergent ...... 15 Child Lock 3 sec...... 29 Adding laundry ...... 29 / Overview of programmes . . . . .16 Changing the programme ...... 30 Cancel the programme ...... 30 Programmes on the programme selector...... 16 Programme end during rinse hold. . .30 Starching ...... 22 Programme end ...... 30 Dyeing/bleaching ...... 22 Removing laundry/ switching off the appliance ...... 30 Programme default settings . . .23 0 a Intelligent dosing system . . . . . 31 Temperature ...... 23 Intelligent dosing system in the Spin speed ...... 23 detergent drawer ...... 31 Finish in ...... 23 Initial use/filling the dispensers . . . . .31 i-Dos settings ...... 24 Everyday use...... 32 Base dosage ...... 33 Dispenser content for i-Dos i I ô . .34 Manual dosage ...... 34

3 en

Q Appliance settings ...... 35 5 Positioning and connecting . . 48 Included with the appliance ...... 48 H Sensors ...... 36 Safety instructions ...... 48 Automatic load sensing ...... 36 Installation surface ...... 49 Unbalanced load detection system . 36 Installation on a base AquaSensor...... 36 or a wooden joist floor ...... 49 Load sensor/display ...... 36 Installation on a platform Dosing recommendation ...... 36 with drawer...... 49 Installing the appliance 2 Cleaning and maintenance . . . 37 in a kitchenette...... 49 Removing the transport locks...... 49 Machine housing/control panel . . . . 37 Hose and cable lengths ...... 50 Drum ...... 37 Water inlet ...... 51 Descaling...... 37 Water outlet ...... 52 i-Dos detergent draw and Levelling ...... 53 its housing ...... 38 Electrical connection ...... 53 The drain pump is blocked, emergency draining...... 39 Before washing for the first time. . . . 54 The drain hose at the Transportation ...... 54 siphon is blocked ...... 40 Filter in the water supply blocked . . 40 r Aqua-Stop warranty ...... 55

3 Faults and what to do about them...... 41 Emergency release ...... 41 Information on the display panel . . . 42 Faults and what to do about them. . 43

4 After-sales service ...... 45

[ Consumption rates...... 46 Energy and water consumption, programme duration and residual moisture for the main washing programmes ...... 46 Efficiency test programmes for cotton fabrics ...... 47

J Technical data ...... 47

4 Intended use en

8 Intended use

esu denetn■I For private domestic use only. ■ The washing machine is suitable for washing machine-washable fabrics and hand-washable wool in detergent solution. ■ To be operated with cold mains water and standard detergents and care products which are suitable for use in washing machines. ■ When measuring out the amount of all detergents, additives, care products and cleaning agents, always follow the manufacturer's instructions. ■ The washing machine may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person. Children must not carry out any cleaning or maintenance work without supervision. ■ Keep children under the age of 3 years away from the washing machine. ■ This appliance is intended for use up to a maximum height of 4000 metres above sea level. ■ Keep pets away from the washing machine. Before operating the appliance: Read the installation and operating instructions and all other information enclosed with the washing machine, and use the machine accordingly. Retain the documents for subsequent use or for subsequent owners.

5 en Safety instructions

■ If you lean on the washing ( Safety instructions machine door when it is open, the washing machine snoitcurtsni yteElectricalSfa safety may tip over and cause :Warning injuries. Danger of death! Do not lean on the washing There is a risk of electric shock machine door when it is if you touch live components. open. ■ Never touch or hold the ■ Reaching into the drum mains plug with wet hands. when it is turning can cause ■ Only pull out the mains cable injuries to hands. by the plug and never by the Do not reach into the drum cable, as this could damage when it is turning. it. Wait until the drum has stopped turning. Risk of injury :Warning :Warning Risk of scalding! Risk of injury! When you are washing at high ■ When the washing machine temperatures, there is a risk of is lifted by its protruding scalding if you come into parts (e.g. the washing contact with hot water e.g. if hot machine door), the water is being drained into a components may break off wash basin. and cause injuries. Do not reach into the hot Do not lift the washing detergent solution. machine by protruding parts. ■ If you climb on the washing machine, the worktop may break and cause injuries. Do not climb onto the washing machine.

6 Safety instructions en

Safety for children :Warning Risk of poisoning! :Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves. children. ■ Do not leave children unattended near the washing :Warning machine. Eye/skin irritation! ■ Do not let children play with Detergents and care products the washing machine. may cause irritation if they come into contact with the eyes :Warning or skin. Danger of death! Keep detergents and care Children may lock themselves products out of the reach of in appliances, putting their lives children. at risk. For appliances that have :Warning reached the end of their service Risk of injury! life: When you wash at high ■ Disconnect the mains plug. temperatures, the glass in the ■ Cut through the mains cable washing machine door gets and remove it, along with hot. plug. Do not let children touch the ■ Destroy the lock on the hot washing machine door. washing machine door. :Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate. Keep packaging, film and packaging parts out of the reach of children.

7 en Environmental protection

water consumption in the selected 7 Environmental programmes. The more display segments are protection visible, the higher the respective consumption. noitcetorp lamnotneriPackaging/usedEvn appliance This enables you to compare the ) Dispose of packaging in an consumption levels of the different environmentally-responsible programmes when choosing your manner. programme settings and decide on This appliance is labelled in an energy- and water-saving accordance with European programme setting. Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). – § Energy consumption The guideline determines the – w Water consumption framework for the return and recycling of used appliances ■ Energy-saving mode: The display as applicable throughout the panel lighting goes out after a few EU. minutes and the Ü button flashes. Press any button to activate the Tips on economical use lighting. Energy-saving mode is not activated ■ Always fill the appliance with the if a programme is running. maximum amount of laundry for ■ Automatic switch off: If the each programme. appliance is not operated for a ~ "/ Overview of programmes" prolonged period, it may on page 16 automatically switch off before the ■ Wash normally soiled laundry programme starts and when the without prewash. programme has ended to save ■ For light and normal soiling in energy. Press the main switch again laundry, you can save energy and to switch on the appliance. detergent. ~ Page 15 ~ "Q Appliance settings" ■ Dosing the detergent using the on page 35 intelligent dosing system (i-Dos) ■ If the washing will be dried in a helps to save both detergent and dryer, select the spin speed water. according to the dryer ■ The selectable temperatures apply manufacturer's instructions. to the care labels on the textiles. The temperatures in the machine may deviate from this so that you get the optimum mix of energy-saving and washing results. ■ Information on energy and water consumption: ~ Page 12 The displays provide information about the relative level of energy and

8 Main points in brief en

Y Main points in brief

feirb ni stniop nMia 1 @ @ @

Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. the # button.

------2 @

Select a If required, change the programme settings of the selected programme programme, e.g. and select programme settings/options. Easy-Care.

------3 @ @

7RPDWH 'RVDJHDXWRPDWLF 3OHDVHORDGODXQGU\PD[NJ%DE\QDKUXQJ öüü

Load the drum. Observe the maximum load (depending on the Start the model) on the display panel. programme.

------4 @ @

7RPDWH rüü )LQLVKHGUHPRYHZDVKLQJDXV %DE\QDKUXQJ

Programme end To switch off, press Turn off the tap (for the # button. models without Aqua-Stop).

------

9 en Getting to know the appliance

* Getting to know the appliance

ecnai lpa ehtwon k ot gnitWashingGte machine





#

6 7

( Detergent drawer with @ Service flap illuminated displays for the i-Dos dispenser on the drawer handle ~ Page 31 0 Operating/display panel 8 Loading door with door handle 9S Open the loading door 9T Close the loading door

10 Getting to know the appliance en

Control panel

Note: All the buttons are sensitive AU i-Dos i I ô, i-Dos ô (except for the main switch) and only ~ Page 24, need to be pressed lightly. An overview of all settings that can be selected ~ Page 16 ( Main switch H Buttons Child Lock 3 sec. for for switching the washing activating/deactivating the machine on and off: childproof lock ~ Page 29 Press the # button. P Buttons Basic Settings 3 sec. 0 Programme selector for changing the appliance for selecting a programme. settings, e.g. button signals, The programme selector can be an overview of all selectable turned in either direction. settings that can be selected Overview of programmes ~ Page 13, ~ Page 35 ~ Page 16 X Ü button for: 8 Buttons for changing the ■ Starting a programme, programme default settings: ■ Interrupting a programme, ~ Page 23 e.g. to add items of laundry ■ Temperature , ~ Page 29, ■ Spin speed (Spin), ■ Cancelling a programme ■ Finish in ` Display panel for settings and @ Buttons for selecting additional information programme settings: AS Options × ~ Page 13, ~ Page 25 AT ecoPerfect ¦, speedPerfect (,

11 en Getting to know the appliance

Display panel

Main menu after selecting the programme e.g. Easy-Care   K The arrows on the display panel :HLWHUH3URJUDPPH 6SLQ indicate in which direction the É programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme.

Selecting the dosage strength using the i-Dos button ƒ& K    for example, select the i-Dos i I ô :HLWHUH3URJUDPPH button and medium dosage strength: Using the buttons below the arrows, you can select the required dosage strength for the detergent. The selection is Others Programmes selected acknowledged by a tick. and select, for example, the Spin programme: Using the buttons below the arrows, you ƒ&  K 0ð¥ü can select the required programme. The 7RPDWH selection is acknowledged by a tick. L'RV0ð'RVDJH ¥QRUPDO %DE\QDKUXQJ 0DLQ0HQX   K 7RPDWH $GGLWLRQDOSURJUDPV 6SLQ Wait or go back to the main menu by %DE\QDKUXQJ pressing the Main menu or i-Dos i I ô 0DLQ0HQX button.

Wait or go back by pressing the Main menu button; the selected programme is displayed on the display panel.

12 Getting to know the appliance en

Options × button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two left- hand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel.

ƒ&  K c 7RPDWH c5LQVHVWRS RQ %DE\QDKUXQJ

Wait or go back to the main menu by pressing the Options × button.

Basic Settings 3 sec. buttons selected Change the appliance setting: e.g. volume of the end signal ~ Page 35 Using the buttons under the two left- hand arrows, select the setting. Using the two right-hand arrows, select the displayed value. The selection is acknowledged by a tick.

ƒ&  K 7RPDWH HQGVLJQDO RII %DE\QDKUXQJ

Wait or go back to the main menu by pressing the Basic Settings 3 sec. (press and hold again).

13 en Laundry

Some examples of soiling levels can Z Laundry be found on ~ Page 15 – Light: Do not prewash, select the yrdnuaPrepareL the laundry speedPerfect ( setting if necessary Caution! – Normal Damage to the appliance/fabrics – Heavy: Load less laundry, select Foreign objects (e.g. coins, paperclips, a programme with prewash needles, nails) may damage the laundry – Stains: Remove/pretreat stains or components in the washing machine. while they are fresh. Firstly, dab with soapy water; do not rub. You should therefore note the following Then wash the items of laundry tips when preparing your laundry: with the appropriate programme. ■ Empty any pockets. Stubborn or dried-in stains can sometimes only be removed by washing several times. ■ Symbols on the care labels Note: The numbers in the symbols indicate the maximum washing temperature that may be used.

M Suitable for normal washing ■ Look out for metal items (paperclips, process; etc.) and remove them. e.g. Cottons programme ■ Wash delicates in a laundry bag N A gentle washing process is (tights, underwired bras, etc.). required; ■ Close any zips; button up any cover e.g. Easy-Care programme buttons. O An especially gentle washing ■ Brush sand out of pockets and process is required; e.g. collars. Delicate/Silk programme ■ Remove curtain fittings or place W Suitable for washing by hand; curtains in a laundry bag. e.g. W Woollens programme Ž Do not machine wash. Sorting laundry Sort your laundry according to the care instructions and manufacturer's information on the care labels, depending on:

■ Type of fabric/fibre ■ Colour Note: Laundry may discolour. Wash white and coloured items separately. Wash new coloured items separately the first time you wash them. ■ Soiling Wash laundry with the same level of soiling together.

14 Detergent en

C Detergent Saving energy and detergent For light and normal soiling, you can tnegreCorrectDte selection of detergent save energy (lower washing temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note treatment of the laundry. ~ See also www.sartex.ch Reduced Light temperature and No visible dirt or stains. If you visit www.cleanright.eu, you will detergent Clothing has taken on some find further information on detergents, quantity as per body odour, e.g.: care products and cleaning agents for the ■ Light summer/sports domestic use. recommended clothing (worn for a few dosage hours) ■ Standard detergent with optical ■ T-shirts, shirts, blouses brighteners Suitable for boil-washable white (worn for up to one day) laundry made from linen or cotton ■ Guest bed linen and hand Programme: Cottons/ towels (used for one day) cold - max. 90 °C Normal ■ Detergent for colours without Visible dirt or a few light bleach or optical brighteners stains, e.g.: Suitable for coloured laundry made ■ T-shirts, shirts, blouses from linen or cotton (sweat soaked, worn a Programme: Cottons/ few times) cold - max. 60 °C ■ Towels, bedding (used for ■ Detergent for colours/delicates up to one week) without optical brighteners Suitable for coloured laundry made from easy-care fibres, synthetic fibres Programme: Easy-Care/ cold - max. 60 °C ■ Detergent for delicates Suitable for delicate, fine fabrics, silk Temperature as Heavy or viscose per the care label Dirt and/or stains clearly Programme: Delicate/Silk/ and detergent visible, e.g. tea towels, baby cold - max. 40 °C quantity as per items, work clothing the ■ Detergent for woollens Suitable for wool recommended Wool programme/ dosage for heavy cold - max. 40 °C soiling Note: When measuring the amount of all detergents/additives/care products and cleaning agents, please always check the manufacturer's instructions and information. ~ Page 28

15 en Overview of programmes

/ Overview of programmes

mamrgsoerp fowe ivProgrammesOrev on the programme selector

Programme/Type of laundry/Instructions Settings Name of the programme Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected; suitable. (¯ = cold) Spin speed that can be selected; 0 = no spin cycle, draining only additional programme settings that can be selected* possible automatic dosing: ■ of a liquid detergent (ô) and ■ of a fabric softener (i) can be selected/deselected è, cannot be selected - Cotton 9 kg/5*** kg Hard-wearing fabrics, heat-resistant fabrics made of cotton or ¯ - 90 °C linen 0 - 1600** rpm Notes ¦, (, !, l, Ã, æ, õ, $, ç ■ In the ecoPerfect ¦ setting, the washing temperature is lower than the selected temperature. If you would like to set a Detergent è, fabric softener è particular washing temperature, use the programme without the ecoPerfect ¦ setting or, if necessary, set a higher temperature. ■ The speedPerfect ( setting is suitable as a short programme for lightly soiled laundry. Easy-Care 4 kg Textiles made of synthetic materials or blended fabrics ¯ - 60 °C 0 - 1200** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

16 Overview of programmes en

Programme/Type of laundry/Instructions Settings Mixed Fabrics 4 kg Mixed load of cottons and synthetic fabrics ¯ - 40 °C 0 - 1600** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Delicates / Silk 2 kg Delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres ¯ - 40 °C or blends (e.g. silk blouses, silk scarves) 0 - 800** rpm Note: . For delicates or silk, use a detergent suitable for machine- washing. ¦, (, !, l, Ã, æ, $ Detergent è, fabric softener è : Wool 2 kg Hand- or machine-washable fabrics that are made of wool or ¯ - 40 °C contain wool; 0 - 800** rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme $, ç (during which the items rest in the water) Detergent - , fabric softener è Notes ■ Wool is of animal origin, e.g. Angora, alpaca, llama, sheep. ■ For wool, use a detergent that is suitable for machine-washing. Hygiene 7 kg/5*** kg Hard-wearing fabrics made of cotton or linen ¯ - 60 °C Note: . Particularly suited to washing items that need to be 0 - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to the longer wash cycle at a defined temperature, higher water level ¦, (, !, l, Ã, æ, õ, $, ç and longer spin cycle. Detergent è, fabric softener è Rapid 15’/30’ 2 / 3,5 kg Extra-short programme of approx. 15 / 30 minutes, suitable for ¯ - 40 °C small items of lightly soiled laundry 0 - 1200** rpm - Detergent è, fabric softener è * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

17 en Overview of programmes

Programme/Type of laundry/Instructions Settings Dark Wash / Jeans 3.5 kg Dark-coloured cottons and dark-coloured easy-care fabrics; ¯ - 40 °C Turn items inside-out before washing. 0 - 1200** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Outdoor * Max. 2 kg Membrane-coated weatherproof or outdoor clothing and water- ¯ - 40 °C resistant fabrics 0 - 800** rpm Notes ¦, (, l, Ã, $, ç ■ Use special detergent suitable for machine washing; add the correct dosage to compartment II in accordance with the Detergent -, fabric softener - manufacturer's instructions. ■ Laundry must not be treated with fabric softener. ■ Before washing, clean the detergent drawer thoroughly (manual compartment) to remove fabric-softener residue. Nightwash Mix * Max. 4 kg Especially quiet programme for washing during the night; suitable ¯ - 40 °C for cotton, linen, synthetic and blended fabrics 0 - 1600** rpm Notes ¦, (, !, l, Ã, æ, õ, $, ç ■ End signal deactivated, ■ Reduced final spin speed set by default and shorter washing Detergent è, fabric softener è time Duvet * Max. 2.5 kg Machine-washable items stuffed with synthetic fibres, such as ¯ - 60 °C pillows, quilts and bedspreads; also suitable for items stuffed with down 0 - 1200** rpm Note: . Wash large items separately. Use a detergent designed for ¦, (, l, Ã, $ delicates and follow the instructions on the item's care label. Use Detergent -, fabric softener - detergent sparingly. * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

18 Overview of programmes en

Programme/Type of laundry/Instructions Settings Shirts / Blouses Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0 - 800** rpm Notes ¦, (, !, l, Ã, æ, õ, $, ç ■ Shirts/blouses are only given a short spin on the Less Ironing (æ) setting. Hang them up to dry while still Detergent è, fabric softener è dripping wet. –> Self-smoothing effect ■ Use the Delicates / Silk programme to wash shirts/blouses made of silk or delicate fabrics. Down Wear * Max. 2 kg Machine-washable fabrics stuffed with down, such as pillows and ¯ - 60 °C duvets; also suitable for items stuffed with synthetic fibres 0 - 1200** rpm Note: . Wash large items separately. Use a detergent designed for delicates and follow the instructions on the item's care label. Use ¦, ( , l, Ã, $ detergent sparingly. Detergent -, fabric softener è Towels * Max. 3.5 kg Hard-wearing, heat-resistant towels made of cotton; ¯ - 90 °C especially soft towels 0 - 1600** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Lingerie * Max. 1 kg For delicate, washable underwear, e.g. made of velvet, lace, Lycra, ¯ - 40 °C silk or satin 0 - 600** rpm ¦, (, l, Ã, æ, õ, $, ç Detergent -, fabric softener è Curtains * Max. 3.5 kg 3.5 kg heavy curtains or 25 - 30 m² lightweight drapes ¯ - 40 °C Notes 0 - 800** rpm ■ Shorter rinse and final spin cycles, ¦, (, !, l, Ã, õ , $, ç ■ Use a detergent that is suitable for machine-washing curtains. ■ The Pre-wash (!) button is set by default. If you do not Detergent è, fabric softener è require a pre-wash cycle, press the button to deactivate the function. * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

19 en Overview of programmes

Programme/Type of laundry/Instructions Settings Drum clean 0 kg Programme for cleaning and caring for the drum and the outer tub, 80, 90 °C e.g. before running the first wash cycle, if washing frequently at a low temperature (40 °C or lower) or if an odour has developed 1200 rpm after a prolonged period of non-use. The Drum clean indicator ç lamp flashes when you use have not used a programme of 60 °C Detergent -, fabric softener - or higher for a long time. Notes ■ Run the drum care programme without any laundry. ■ Use washing powder or a detergent containing bleach. To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for woollens or delicates. Rinse / Freshen Up * - Rinse Plus with spin - 0 - 1600** rpm Ã, l, $, æ Detergent -, fabric softener è Spin * - Extra spin with selectable speed - 0 - 1600** rpm æ Detergent -, fabric softener - Drain * - For the rinsing water, e.g. after the $ setting (Rinse Hold = no - final spin cycle) - - Detergent -, fabric softener - * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

20 Overview of programmes en

Programme/Type of laundry/Instructions Settings Textile Guard * Max. 1 kg Wash cycle followed by waterproofing of membrane-coated ¯ - 40 °C weatherproof and outdoor clothing or water-resistant fabrics 0 - 800** rpm 1. Select a programme. ¦, (, l, Ã, $, ç 2. Add special detergent for outdoor clothing to compartment À Á. Detergent -, fabric softener - 3. Press the Ü button. The programme stops before the last rinse cycle. Follow the information on the display panel. 4. Add a waterproofing agent (max. 170 ml) to compartment À Á. 5. Press the Ü button. After-treat the laundry in accordance with the manufacturer's instructions. Notes ■ Use a special detergent suitable for machine washing and dose in accordance with the manufacturer's instructions: ■ Laundry must not be treated with fabric softener. ■ Before washing, clean the detergent drawer thoroughly (manual compartment) to remove fabric-softener residue. Sportswear * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics ¯ - 40 °C Notes 0 - 800** rpm ■ Laundry must not be treated with fabric softener. ¦, (, !, l, Ã, æ, õ, $, ç ■ Before washing, clean the detergent drawer thoroughly (manual compartment) to remove fabric-softener residue. Detergent -, fabric softener - Auto * Max. 6 kg Hard-wearing fabrics; 40 °C The degree of soiling and the type of fabric are automatically 1400** rpm detected and the washing sequence and intelligent dosing are adjusted accordingly. $, ç Detergent è, fabric softener è Auto Soft * Max. 3.5 kg Gentler treatment of the laundry; 30 °C The degree of soiling and the type of fabric are automatically 1000** rpm detected and the washing sequence and intelligent dosing are adjusted accordingly. $, ç Detergent è, fabric softener è * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

21 en Overview of programmes

Programme/Type of laundry/Instructions Settings Auto Intensive * Max. 6 kg More intensive treatment of the laundry; 60 °C The degree of soiling and the type of fabric are automatically 1400** rpm detected and the washing sequence and intelligent dosing are adjusted accordingly. $, ç Detergent è, fabric softener è * The programmes and additional programme settings are model-dependent. The programmes/settings that are available can either be selected directly on the control panel or under Others Programmes or Options ×. ** The maximum spin speed depends on the programme and model *** Reduced load for the speedPerfect ( setting

Starching Note: Laundry should not be treated with fabric softener. 1. Switch on the appliance. 2. Select the Rinse / Freshen Up programme. 3. Pour liquid starch into compartment À Á in accordance with the manufacturer's instructions (clean first if necessary). 4. Press the Ü button.

Dyeing/bleaching Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine to bleach clothes.

22 Programme default settings en

0 Programme default Finish in The programme duration is shown after settings selecting the programme.

sgnittes tluafmeadmrg oeThePr programme default settings are Before starting the programme, you displayed in the main menu after can preselect the programme end in selecting the programme. hourly increments (h = hour) up to a maximum of 24 hours. Display panel ~ Page 12 After starting the programme, the You can change the default settings: selected number of hours e.g. 8 h is ■ Temperature , Spin speed and shown on the display panel and counts Finish in as long as the arrow is down until the wash programme starts. displayed in the main menu and/or The duration of the programme is then ■ the i-Dos settings ~ Page 12, displayed. ~ Page 24 Note: The programme duration is An overview of all programme settings, automatically adjusted when the which can be selected depending on programme is running. Changes to the the programme, can be found from programme default settings or ~ Page 16. programme settings, options, foam detection function, unbalanced load detection, the load or soiling may also Temperature change the programme duration. Depending on what stage the After starting the programme , you can programme is in, you can change the change the preselected number of set temperature before and during the hours as follows: programme. 1. Press the Ü button. The maximum temperature that can be 2. Use the Finish in button to change set depends on the programme that has the number of hours. been selected. 3. Press the Ü button. After starting the programme, while the Spin speed programme is running, you can add or (Spin) remove laundry if necessary. ~ Page 29 Depending on what stage the programme is in, you can change the spin speed (in rpm; revolutions per minute) before and during the programme. The maximum speed that can be set depends on the model and programme that has been selected. Setting 0: No spin cycles, the water is only drained. The laundry stays wet inside the drum, e.g. for items that should not be spun.

23 en Programme default settings i-Dos settings i-Dos i for fabric softener Your washing machine has an intelligent Dosage strengths dosing system for liquid detergent and ª High: high level of softness fabric softener (or detergent when using © Medium: medium level of softness the setting Dispenser content: Detergent ~ Page 35) ¨ Low: low level of softness For the majority of programmes on your ö Automatic dosage deselected washing machine, detergent and fabric softener are dosed automatically. Depending on what stage the The i-Dos settings are not retained when programme is in, you can change the the appliance is switched off. settings for automatic detergent dosage. The following have been preset at the factory:

■ i-Dos ô: ¨ Detergent dosage for lightly soiled laundry ■ i-Dos i I ô:: © Fabric softener dosage for a medium level of softness i-Dos ô for detergent Dosage strengths ª High: heavy soiling and staining © Medium: average soiling ¨ Low: light soiling ö Automatic dosage deselected, manual dosage ~ Page 34

You can change the settings for automatic detergent dosage before the programme starts. You can find information on degrees of soiling on ~ Page 15

24 Additional programme settings/options en

\ Additional programme Pre-wash * settings/options (* (!) Settings that can be selected: depending on the on – off model) For heavily soiled laundry. snoitpo/sgnittemasmrg oerp lanoitiTheAd settings/options that are available Notes depend on the model. ■ If intelligent dosage is selected, the Depending on the programme selected, detergent will be dispensed you can select different settings/options automatically for the prewash and in order to better adapt the washing the main wash. process to your items of laundry. ■ Set the i-Dos dosage to medium to prevent overdosing. The settings can be selected: ■ If dosing manually, allocate ■ via the corresponding button on the detergent to the prewash and the control panel or main wash. Place detergent for the ■ via the Options × button. prewash in the drum and add ~ Page 11 detergent for the main wash to compartment À Á. An overview of all additional settings, which can be selected depending on the programme, can be found from Extra rinse * ~ Page 16. (l) speedPerfect ( Settings that can be selected: ö + 1 Rinse Washing in a shorter time while ÷ + 2 Rinse achieving a washing result that is ÷ + 3 Rinse consistent with, but uses more energy off than, the selected programme, without the speedPerfect ( setting. Additional rinse cycles depending on the programme; longer programme Note: Do not exceed the maximum duration for particularly sensitive skin load. and/or for areas with very soft water. Overview of programmes ~ Page 16 Water Plus * ecoPerfect ¦ (z) Energy-optimised washing by reducing the temperature while achieving a Settings that can be selected: washing result that is consistent with the on – off selected programme, without the Increased water level, gentler treatment ecoPerfect ¦ setting. of the laundry.

25 en Operating the appliance

Less Ironing * Rinse Hold * (æ) ($) Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle. End the programme reduced spin speed. ~ Page 30 Note: The washing's residual moisture is increased. Silent Wash * (ç) Soak * Settings that can be selected: (õ) on – off Settings that can be selected: Reduced noise values thanks to special on – off wash and spin cycle and deactivated end signal. Especially suitable for Before the main wash cycle starts, the washing at night. washing remains for longer in the water to partially dissolve intensive soiling. Note: Residual moisture of the washing To be used for particularly stubborn is slightly increased. soiling. Dose the detergent using i-Dos or add it into the À Á compartment in 1 Operating the accordance with the manufacturer's appliance instructions.

ecnai lpa eht gnitaPreparingOrep the washing Notes ■ Load laundry of the same colour. machine ■ If your machine does not have this option, you can soak as follows: Note: The washing machine must be and . 1. Select i-Dos or dose detergent in the correctly installed connected À Á manual compartment in From ~ Page 48 accordance with the manufacturer's 1. Plug into the mains. instructions. 2. Turn on the tap. 2. Select the Cotton30 °C programme 3. Open the washing machine door. and the Ü button. 4. Check that the drum is completely 3. Press the Ü button after approx. 10 drained. Drain if necessary. minutes. The laundry remains in the Otherwise, the load display may soaking solution. malfunction. ~ Page 36 4. Leave the laundry to soak for as long as required, then either press the Ü button again to continue the programme or change the programme. Note: No additional detergent is required; the soaking solution is used for washing.

26 Operating the appliance en

Switching on the appliance/ Change the programme selecting a programme default settings Press the # button. The appliance is You can use or change the default switched on. settings for each washing cycle. The Siemens logo appears on the To do this, repeatedly press the display and all indicator lamps light up. corresponding button until the required The Cotton programme set at the setting is displayed. ~ Page 23 factory is then always displayed. Note: Pressing and holding the buttons You can: automatically runs through the set values. ■ use this programme or ■ select another programme on the The settings are activated without control panel or needing to be confirmed. ■ select a programme under Others. After the appliance is switched off, the ~ Page 12 i-Dos settings for i I ô and ô are Note: If you have activated the retained. All other settings are not saved childproof lock, you must deactivate it and must be selected again. before you can set a programme. Programme default settings ~ Page 16 The indicator lamp on the programme selector lights up and the main menu with the programme default settings Select additional programme for the selected programme appear on settings the display panel: By selecting additional settings/options, ■ Temperature, you can better adapt the washing ■ Spin speed, process to your items of laundry. ■ Programme duration, The settings can be selected or ■ i-Dos settings, deselected depending on the progress ■ Any additional settings and of the programme. ~ Page 12 ■ Information on water and energy consumption. ~ Page 8 The ecoPerfect ¦ and speedPerfect ( button indicator lamps light up if a In appliances with a drum light: setting is activated. The drum is lit after switching on the The other settings are indicated by a appliance, after opening and closing the symbol on the display panel if the door and after starting the programme. setting is activated. The light switches off automatically. For multi-level settings, press and hold You can: the buttons to run through the settings automatically. ■ use the programme default settings and load laundry ~ Page 28, The settings are not saved after the ■ or change the programme default washing machine is switched off. settings and/or select additional Additional programme settings/options settings. ~ Page 25

27 en Operating the appliance

Placing laundry into the drum Measure and add detergent and care products :Warning Risk of death! For the majority of programmes on your Items of laundry pretreated with washing machine, detergent and fabric cleaning agents that contain solvents, softener are dosed automatically; it is a e.g. stain remover/cleaning solvent, factory setting for these programmes may cause an explosion after being and can be changed. ~ Page 16 loaded into the washing machine. In addition to intelligent dosing, you can Hand-rinse these items of laundry manually add cleaning aids (e.g. thoroughly beforehand. softener, bleach or stain remover) to compartment À Á, if necessary. Load the pre-sorted, unfolded laundry Page 34 into the drum. The load screen for the ~ selected programme (e.g. Easy-Care) is For programmes without intelligent indicated on the display panel. dosing, or as desired (in which case, set intelligent dosing to ö (off)), detergent can be added manually to compartment À Á. ~ Page 34

7RPDWH Start the programme 'RVDJHDXWRPDWLF Make sure that no items of laundry are 3OHDVHORDGODXQGU\PD[NJ%DE\QDKUXQJ öüü trapped between the door and the rubber seal, and close the door.

The load bar fills as the laundry is loaded. If the maximum load is exceeded, the bar flashes. Observe the maximum indicated load. Overfilling adversely affects the washing result and encourages creasing. The main menu for the selected Notes programme is indicated again on the ■ Mix items of laundry of varying sizes. display panel. Laundry items of different sizes Press the Ü button to start the distribute themselves better during programme. the spin cycle. Individual laundry During washing, the progress of the items may cause an unbalanced programme is displayed in a bar on the load. display panel. The bar fills in during the ■ Wait until the Siemens logo no washing cycle and provides information longer appears before adding about the current progress of the laundry. programme. ■ The load screen appears when the door is opened or when the amount The arrows fade in and out according to of laundry is changed. the progress of the programme. They indicate the programme settings/ options which can be changed/added as the programme progresses.

28 Operating the appliance en

Some programme sequence steps If the programme selector is adjusted or explained: a button is selected while the childproof lock is active, the w symbol flashes ■ Load adjust active ~ Page 36 briefly. Notes ■ The childproof lock can be activated at any time. ƒ&  K c ■ The childproof lock remains active, /RDGDGMXVWDFWLYH even once the washing machine has been switched off. Before selecting :HLWHUH3URJUDPPH the next programme, deactivate the childproof lock. ■ If the appliance is switched off while the programme is running and ■ Pre-washing, Washing, Rinsing, childproof lock is activated, the Spin, Drain ... are displayed during programme continues when the the wash cycle. appliance is switched back on. ■ Extra rinse: foam Note: Foam detection Adding laundry If Foam has been detected also appears on the display panel, the After starting the programme, you can washing machine has detected too add or remove laundry if necessary. much foam during the wash Press the Ü button to do this. programme and has automatically switched on one or more rinse The Ü button indicator lamp flashes cycles in order to remove the foam. and the machine checks whether it is Add less detergent to the next possible to add laundry. washing cycle with the same load. It is possible to add laundry when ■ Other displays ~ Page 42 Pause: Reload is possible appears on the display. If you want to lock the programme to prevent it from being inadvertently To continue the programme, press the adjusted, you can select the childproof Ü button. The programme continues lock as follows. automatically. Notes Child Lock 3 sec. ■ Do not leave the door open for too long when adding laundry as water You can lock the washing machine to from the laundry may leak out. prevent the functions you have set from ■ For safety reasons, the door remains being changed inadvertently. locked when the water level or To activate/deactivate, press both temperature is high, or while the Child Lock 3 sec. buttons for approx. 3 drum is turning, and it is not possible seconds. ~ Page 11 to add laundry during this time. w Childlock has been activated Follow the information on the display appears on the display panel. panel. After approx. 3 seconds, the display ■ The load display is not active during reverts back to the main menu. reloading.

29 en Operating the appliance

Changing the programme Programme end If you have started the wrong ÏFinished, remove washing appears programme by mistake, you can on the display panel. The Ü button change the programme as follows: indicator lamp is off. 1. Press the Ü button. 2. Select another programme. Removing laundry/switching 3. Press the Ü button. The new programme starts from the off the appliance beginning. 1. Open the loading door and remove the laundry. Follow the information Cancel the programme on the display panel. 2. Press the # button. The appliance is For programmes at high temperatures: switched off. 1. Press the Ü button. 3. Turn off the tap. 2. To cool down laundry: Select Note: Not required for AquaStop Rinse / Freshen Up. models. 3. Press the Ü button. Notes For programmes at low temperatures: ■ Do not leave any items of laundry in 1. Press the Ü button. the drum. They may shrink in the 2. Select Spin or Drain . next wash or discolour another item. 3. Press the Ü button. ■ Remove any foreign objects from the drum and the rubber gasket – risk of Programme end during rinse rusting. hold ■ Wipe the rubber gasket dry. The following appears on the display panel:

5LQVHKROGUHDFKHG7RPDWH 6HOHFWVSLQRUGUDLQ DQGWKHQVWDUW Notes %DE\QDKUXQJ 6SLQ 3XPS ■ Leave the loading door and detergent drawer open so that any residual water can evaporate. ■ Always wait until the programme ends, as the appliance could still be Continue the programme by: locked. Then switch the appliance on and wait for it to unlock. ■ Select the Spin (change the spin speed if necessary) or the Drain ■ If the display panel goes off at the programme. end of a programme, the energy- saving mode is active. Press any ■ Press the Ü button. button to activate the panel.

30 Intelligent dosing system en

Initial use/filling the a Intelligent dosing dispensers system Refer to the manufacturer's instructions when choosing your detergent and metsys gnisod tnegi l letnIntelligentI dosing system in fabric softener. We recommend the use the detergent drawer of standard, universal and colour liquid i-Dos Intelligent Dosing system detergents for all machine-washable, coloured fabrics made of cotton or Your washing machine has an intelligent synthetic materials. dosing system for liquid detergent and fabric softener. Notes The i-Dos compartments ß and i/ß in ■ Only use easy-pour liquid products the detergent drawer are used for this that the manufacturer recommends purpose. You can choose whether you adding to the detergent drawer. would like to use one liquid detergent ■ Do not mix different liquid and one fabric softener or two liquid detergents. If changing your liquid detergents. Dispenser selection detergent (type, manufacturer, etc.), ~ Page 35 empty the dispenser completely and clean it. ~ Page 38 ■ Do not use products containing  solvents, caustic agents or volatile substances (e.g. bleach).  ■ Do not mix detergent and fabric  softener. ■ Do not use products that have expired or are highly congealed. ( Dispenser ß (1.3 l) for liquid ■ To prevent drying out, do not leave detergent the dispenser lids open for a long 0 Dispenser i/ß (0.5 l) for fabric period of time. softener (or detergent with dispenser selection) 8 Compartment À Á for manual dosing Depending on the programme selection and settings, the optimum amounts of detergent/fabric softener are dosed via the i-Dos dispenser.

31 en Intelligent dosing system

Filling the dispensers: ■ The display lights up if intelligent dosing is selected for the The dispenser covers in the detergent corresponding dispenser: drawer are marked with the following – ô for dispenser ß (detergent), symbols: – for the i I ô illuminated display ■ ß Standard/universal detergent for the combined compartment ■ i/ß Fabric softener i/ß, the lamp for the appropriate dispenser content 1. Open the detergent drawer. lights up: 2. Open the dispenser cover(s). i for fabric softener/ô for 3. Add detergent/fabric softener. Do detergent. ~ Page 31 not fill above the max. marking. ■ The display flashes if the fill level of the selected intelligent dosing dispenser is below the minimum level.

(De)selecting intelligent dosage and adjusting the dosage strength: The intelligent dosages for detergent and fabric softener are set at the factory 4. Close the cover(s). for programmes in which intelligent 5. Slowly push the detergent drawer in dosing can be used. completely. Overview of programmes ~ Page 16 When the appliance is switched on, the The dosage strength has been preset to fact that the detergent drawer is closed low (lightly soiled laundry) for completely is indicated by the following: detergent ô and to medium (medium ■ the corresponding illuminated level of softness) for fabric softener i. display on the drawer handle lights It can be changed for each programme. up when intelligent dosing i-Dos ô, ~ Page 24 i-Dos i I ô is selected. In addition to intelligent dosing, cleaning ■ the display flashes once and then aids (e.g. stain remover) can be added goes out if intelligent dosing is not manually to compartment À Á, if selected. necessary. ~ Page 34 Everyday use Note: Depending on the programme, the selection (on/off) as well as the Illuminated displays on the drawer relevant dosage strength that has been handle: selected for i-Dos iIô and i-Dos ô are saved until they are changed, even when the machine is switched off.

32 Intelligent dosing system en

Topping up the detergent/ fabric Below is an example of detergent softener: dosages on a packaging label: If, while intelligent dosing is selected, the respective illuminated display Degree of flashes and there is corresponding soiling → information on the display panel, this Water hardness ↓ indicates that the minimum fill level has light normal heavy very heavy not been reached. The content is soft/medium 55 75 ml 120 ml 160 ml sufficient for approx. 3 washes. ml The same detergent or fabric softener hard/very hard 75 95 ml 150 ml 180 ml can be added at any time. If you change ml product/manufacturer, we recommend that you clean the dispensers first. The default setting for the basic dosage ~ Page 38 is set specifically according to the area If required, adjust the basic dosage. in which you live (e.g. 75 ml for detergent and 36 ml for fabric softener). Base dosage Set the basic detergent dosage according to the detergent's packaging The basic dosages are: label. Take your water hardness into consideration when doing so. ■ For detergents – based on the Select the basic fabric softener dosage manufacturer’s recommendation for according to how soft you would like average soiling and the respective your laundry to be. water hardness. Changing one basic dosage affects all ■ F or fabric softeners – based on the manufacturer's recommendation for three dosage quantities in the same a medium level of softness. way. Refer to the packaging label on your Notes detergent/fabric softener or ask the ■ Reduce the basic dosage if using a manufacturer directly for this very concentrated detergent. information. ■ If large amounts of foam are repeatedly created during washing, To find out the hardness of your water please check your basic dosage and supply, use a test strip or check with dosage quantity settings. your water supplier. Certain types of liquid detergent can also create excessive amounts of My water hardness: foam. If your basic dosage and dosage quantity settings are correct, we advise you to use a different detergent.

Changing the basic dosages: Appliance settings ~ Page 35

33 en Intelligent dosing system

Dispenser content for Manual dosage i-Dos i I ô In addition to intelligent dosing, you can Instead of fabric softener, a second manually add cleaning aids (e.g. liquid detergent can be used in the softener, bleach or stain remover) to i-Dos i I ô dispenser. compartment À Á, if necessary. For programmes without intelligent Notes dosing, or as desired (in which case, ■ When switching the i-Dos i I ô set intelligent dosing to ö (off)), dispenser content from fabric detergent can be added manually to softener to detergent, the basic compartment À Á. dosage for detergent is set to factory settings for this dispenser and the :Warning dosage for this detergent is set to Eye/skin irritation! off for all programmes in which Detergent and care products may spray intelligent dosing can be used. Then, out if the detergent drawer is opened using the i-Dos i I ô button on the while the appliance is in operation. display panel, select the detergent Open the drawer carefully. dosage (low, medium or high). Rinse eyes or skin thoroughly if they ~ Page 12 come into contact with detergent/care ■ The i-Dos ô dispenser is products. automatically deactivated if If swallowed accidentally, seek medical detergent dosing is activated for the advice. i-Dos i I ô dispenser. The settings for this programme are Caution! saved until they are changed. Damage to the appliance ■ When switching the i-Dos i I ô Cleaning agents and agents for dispenser content to fabric softener, pretreating laundry (e.g. stain removers, the basic dosage is set to factory prewash sprays, etc.) may cause settings and the dosage is set to damage if they come into contact with "normal" for all programmes in which the surfaces of the washing machine. intelligent dosing can be used. Do not allow these agents to come into ■ Switching the dispenser content contact with the surfaces of the washing requires additional confirmation via machine. If necessary, immediately wipe the display panel. away spray residue and other residues/ droplets with a damp cloth. Changing the dispenser content: Appliance settings ~ Page 35 Notes ■ When dosing all detergents, cleaning aids and cleaning agents, always follow the manufacturer's instructions. ■ If dosing detergent manually, do not add additional detergent to the intelligent dosing dispenser (set intelligent dosing to ö (off)). This will prevent overdosing and foaming ■ Dilute viscous fabric softener and fabric conditioner with water to prevent blockages.

34 Appliance settings en

Dosing and adding detergent: ■ Info: Drum cleaning on – off 1. Pull out the detergent drawer. This instruction reminds you to carry out a drum cleaning programme. ■ Dispenser content: i-Dos i I ô content Fabric softener - detergent Select/change the dispenser content. ■ Basic dosage: i-Dos i I ô basis 2. Add the correct dosage to 10 ml – 200 ml compartment À Á depending on: Set the basic dosage in accordance – Soiling with the recommendations of the – Water hardness (ask your water detergent/fabric softener supply company) manufacturer. – The amount of laundry ■ Basic dosage: – The manufacturer's instructions i-Dos ô basis 3. Close the detergent drawer. 10 ml – 200 ml Set the basic dosage in accordance with the recommendations of the detergent manufacturer. To change the settings, press and hold Q Appliance settings both Basic Settings 3 sec. buttons for approx. 3 seconds. ~ Page 13 sgnittes ecnai lYouAp can change the following appliance settings: Notes Settings that can be selected: ■ The settings are retained after the appliance is switched off. ■ End signal off – quiet – medium – loud – very ■ If you press and hold the buttons, loud the settings run through Adjust the volume of the end signal. automatically. ■ Button signal off – quiet – medium – loud – very loud Adjust the volume of the button signals. ■ Auto power-off of the appliance in 15 – 30 – 60 min – never The appliance automatically switches off after ... minutes (= 0 kWh energy consumption); to switch on, press the # main switch button. ■ Language German English ... Change the displayed language.

35 en Sensors

H Sensors Dosing recommendation The dosing recommendation indicates a srosAutomaticSne load sensing recommended detergent dosage as a percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water recommendation of the detergent consumption and programme duration manufacturer. in each programme. Note: By adhering to the dosing Unbalanced load detection recommendation, you can help look after both the environment and your system household budget. The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning. If the laundry is extremely unevenly distributed, the speed is reduced or the spin cycle is not performed for safety reasons. Note: Place large and small items of laundry evenly in the drum. ~ Page 28, ~ Page 43

AquaSensor depending on the model During the rinse cycle, the AquaSensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water. The duration and the number of rinse cycles depend on the turbidity of the water.

Load sensor/display The load sensor detects the load level in the washing machine when the door is open. This is indicated by the bar filling on the display panel. Note: In order for the load sensor to fully determine the amount of laundry, the drum must be empty before the washing machine is switched on.

36 Cleaning and maintenance en

Machine housing/control 2 Cleaning and panel maintenance ■ Wipe the housing and the control ecnaetnmia dna gninae:Cl Warning panel with a soft, damp cloth. Danger of death! ■ Remove the detergent residue There is a risk of electric shock if you immediately. touch live components. ■ Do not clean with a water jet. Switch off the appliance and pull out the mains plug. Drum :Warning Use chlorine-free cleaning agents, do Risk of poisoning! not use steel wool. Toxic vapours can be produced by If there are odours in the washing cleaning agents that contain solvents, machine, or to clean the drum, run the e.g. cleaning solvent. Drum clean 90 °C programme without Do not use cleaning agents that contain laundry. Add washing powder. solvents. Caution! Descaling Damage to the appliance Descaling should not be necessary if Cleaning agents that contain solvents, the detergent is measured out correctly. e.g. cleaning solvent, can damage However, if it is required, follow the surfaces and components in the manufacturer's instructions for the machine. descaling agent. Suitable descalers can Do not use cleaning agents that contain be obtained via our website or from solvents. customer services. ~ Page 45 Prevent detergent residue from building up and odours from forming by following these instructions: Notes ■ Ensure the room in which the washing machine is set up is well ventilated. ■ Leave the door and detergent dispenser tray open slightly when the washing machine is not in use. ■ Occasionally run a wash using the Cotton 60 °C programme and powder detergent.

37 en Cleaning and maintenance i-Dos detergent draw and its 2. Cleaning the dispensers/detergent drawer: housing The detergent drawer can be 1. Emptying the dispensers: removed completely to allow you to The dispensers have emptying clean to dispensers after you have outlets with removable sealing plugs emptied them. at the front. To empty the a) Empty the dispensers before dispensers, first remove the drawer removing the drawer. handle as shown below: Note: Only put the drawer handle a) Pull out the detergent drawer. back on after you have finished cleaning. b) Pull out the drawer. c) Press the catch and remove the drawer completely.

b) Pull the catch (A) on the back of the drawer handle (in the centre at the bottom) slightly towards you. This unlocks the drawer handle (B), which you can then d) Carefully remove the drawer pull off by lifting it upwards. cover.

c) To empty the dispensers, carefully pull off each of the Caution! sealing plugs and empty the Risk of damage to the detergent contents into a suitable container. drawer. The detergent drawer contains electrical components. These may become damaged if they come into contact with water. – Do not clean the cover in the dishwasher and do not immerse it in water.

d) Then push the sealing plugs back in completely.

38 Cleaning and maintenance en

The drain pump is blocked, emergency draining :Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into – Protect the rear drawer connector contact with the hot water, you may be against water, detergent or fabric- scalded. softener residue; if necessary, Allow the water to cool down. clean the outer surfaces with a soft, damp cloth. Dry before 1. Turn off the water tap so that no putting back in. more water can flow in and has to be drained via the drain pump. e) Clean the drawer and the cover 2. Switch off the appliance. Pull out the with a soft, damp cloth or a hand mains plug. shower. Also clean the inner 3. Open and remove the service flap. surfaces with a soft, damp cloth.

4. Take the drain hose out of the f) Dry the drawer and the cover and retainer. put them back together. Remove the sealing cap and pour g) Push the drawer handle back in the water out into a suitable from above until you feel it click container. in place. Replace the sealing cap and place h) Clean the inside of the detergent- the drain hose back in the retainer. drawer housing. i) Push the detergent drawer in completely.

5. Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump-cover thread and pump housing. The impeller in the drain pump must be able to rotate. Refit the pump cover and screw it on tightly. The handle must be in a vertical position.

39 en Cleaning and maintenance

Filter in the water supply blocked First, reduce the water pressure in the supply hose: 1. Turn off the tap. 2. Select any programme (except 6. Put the service flap back on, lock it Rinse/Spin/Empty). into place and close it. 3. Press the Ü button. Allow the programme to run for approximately 40 seconds. 4. Press the # button. The appliance is switched off. 5. Pull out the mains plug. Then clean the filter: 1. Disconnect the hose from the tap. Clean the filter with a small brush. Note: To prevent unused detergent from flowing straight into the drain during the next wash, pour 1 litre of water into compartment À Á and start the Drain programme.

The drain hose at the siphon is blocked 2. For standard and Aqua-Secure 1. Switch off the appliance. Pull out the models, clean the filter on the rear of mains plug. the appliance: 2. Loosen the hose clamp. Carefully Remove the hose from the rear of remove the drain hose; residual the appliance. water may leak out. Use pliers to remove the filter and 3. Clean the drain hose and siphon then clean it. connecting piece.

3. Connect the hose and check for 4. Re-attach the drain hose and secure leaks. the connection point using the hose clamp.

40 Faults and what to do about them. en

Caution! 3 Faults and what to do Water damage about them. Any escaping water may cause water damage. meh.t tuoba od ot wtah dna stluEmergencyFa release Do not open the door if water can be seen through the glass. E.g. in the event of a power cut The programme continues when the 1. Switch off the appliance. Pull out the power supply is restored. mains plug. 2. Drain the water. ~ Page 39 However, if the laundry has to be 3. Pull the emergency release removed, the washing machine door downwards with a tool and release. can be opened as follows: The door can then be opened. :Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water and laundry. If possible, leave it to cool down first. :Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning.

41 en Faults and what to do about them.

Information on the display panel

Display Cause/remedy Re-fill the The i-Dos dispensers are below the minimum fill level; top up ~ Page 32. i-Dos i I ô , ô dispenser i-Dos i I ô, i set i-Dos i I ô , i-Dos ô to off. -Dos ô error; Call the after-sales service. The appliance can still be operated using manual deactivate dosing. Manual dosing ~ Page 34 i-Dos i I ô, i-Dos ô Please close Push the detergent drawer in correctly. ~ Page 32 detergent drawer Pause: Reload is not Water level or temperature is too high. Press the Ü button to continue the possible programme. Door cannot be Water level or temperature is too high. Press the Ü button to continue the unlocked: Water level programme. or temperature is too high

The door cannot be ■ Laundry may be caught. Open and close the door again and press the Ü locked; please open button. the door again, then ■ If necessary, push the door closed or remove some laundry and then push it close it and select the closed again. Ü button ■ If necessary, switch the appliance off and on again; set the programme and make your individual settings; start the programme.

Please open tap ■ Turn on the tap fully, ■ Supply hose kinked/trapped, ■ The water pressure is too low. Clean the filter. ~ Page 40

Please clean pump ■ The drain pump is blocked. Clean the drain pump. ~ Page 39 ■ The drain hose/drain pipe is blocked. Clean the drain hose at the siphon. ~ Page 40 AquaStop has been Does not occur for models without AquaStop activated! Please call There is water in the base trough; the appliance is leaking. Turn off the tap. Call the the after-sales service after-sales service. Auto power-off in ... Appliance automatically switches off after ... seconds if it is not operated for a seconds prolonged period. To cancel, press any button. ~ Page 35 Water cooling To protect the wastewater pipes, the hot detergent solution is cooled before being drained.

42 Faults and what to do about them. en

Display Cause/remedy Drum care This instruction reminds you to carry out the Drum clean 90 °C programme information: or a 60 °C programme to clean and care for the drum and the outer tub. Notes ■ Run the programme without laundry. ■ Use washing powder or a detergent containing bleach. To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for woollens or delicates. ■ Switch reminder information on/off. ~ Page 12 Other displays Switch off the appliance, wait for five seconds and then switch it on again. If the Error E:XXX display appears again, call the after-sales service.

Faults and what to do about them.

Faults Cause/remedy

Water is leaking from the ■ Attach the drain hose correctly or replace it. appliance. ■ Tighten the threaded joint on the inlet hose.

The appliance is not filling ■ Have you pressed the Ü button? with water. ■ Is the tap turned on? ■ Could the filter be clogged? Clean the filter. ■ Is the inlet hose kinked or trapped?

The dispenser is empty ■ Is the drawer cover/connector dirty? Cleaning ~ Page 34 and the fill level indicator ■ Has the detergent drawer been pushed in correctly? Insert correctly. is not flashing. ~ Page 38 The wrong detergent/ Dispenser(s): fabric softener has been 1. Empty and clean. poured into the 2. Refill. ~ Page 32 dispenser(s). Detergent/fabric softener Clean and refill the dispensers. has congealed in the dispensers.

The door cannot be ■ The safety function is activated. Cancel the programme? ~ Page 30 opened. ■ Is $ selected (Rinse Hold = no final spin)? ~ Page 30 ■ Can the door only be opened by the emergency release? ~ Page 41

The programme will not ■ Have you pressed the Ü or Finish in button? start. ■ Is the door closed? ■ Is the w childproof lock activated? Deactivate. ~ Page 29 The drum briefly jerks or Not a fault – the internal motor test may cause the drum to jerk or judder briefly judders after the when the wash programme starts. programme has started.

The water is not draining. ■ Is $ selected (Rinse Hold = no final spin)? ~ Page 30 ■ Clean the drain pump. ~ Page 39 ■ Clean the drain pipe and/or the drain hose.

43 en Faults and what to do about them.

Faults Cause/remedy Water is not visible in the Not a fault – the water is below the visible area. drum.

The spin result is not ■ Not a fault – the unbalanced load detection system has interrupted the spin satisfactory. cycle because the laundry is unevenly distributed. Laundry wet/too damp. Distribute small and large items of washing in the drum. ■ Is Less Ironing selected (depending on the model)? ~ Page 32 ■ Is the selected speed too low? ~ Page 26 The spin cycle runs Not a fault – the unbalanced load detection system is adjusting an imbalance. several times.

The programme is taking ■ Not a fault – the unbalanced load detection system is adjusting an longer than usual. imbalance by repeatedly distributing the laundry. ■ Not a fault – the foam detection is system active – a rinse cycle has been switched on. The length of the Not a fault – the programme sequence is optimised for the specific washing programme changes process. This may change the length of the programme shown on the display during the wash cycle. panel.

Residual water in the ■ Not a fault – the effectiveness of the care product is not affected. care-product ■ Clean the insert if necessary. ~ Page 28 compartment. Odours in the washing Run the Drum clean or Cotton 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for woollens or delicates.

Repeated, intensive ■ Check the basic dosage settings and dosage strength. foaming. ■ If required, use a different liquid detergent. Detergent/fabric softener There is too much detergent/fabric softener in the dispensers. Observe the drips off the seal and max markings in the dispensers. collects on the door or in the seal fold. i-Dos i I ô default All settings are changed when the menu setting i-Dos i I ô: Content is setting deleted. changed. ~ Page 23

Loud noises, vibrations ■ Appliance aligned? Align the appliance. ~ Page 53 and machine “movement” ■ Are the appliance feet secured? Secure the appliance's feet. ~ Page 53 during the spin cycle. ■ Have the transport braces been removed? Remove the transport braces. ~ Page 49

The display panel/ ■ Power failure? indicator lamps do not ■ Have the fuses blown? Switch on/replace the fuses. work while the appliance ■ If the fault occurs repeatedly, call the after-sales service. is running.

There is detergent ■ Some phosphate-free detergents contain water-insoluble residue. residue on the laundry. ■ Select Rinse / Freshen Up or brush the laundry after washing.

44 After-sales service en

Faults Cause/remedy

In the "Reload" status, Ü ■ The water level is too high. It is not possible to add laundry. Close the door flashes very quickly and a immediately, if necessary. signal sounds. ■ Press the Ü button to continue the programme. If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required: ■ Switch off the appliance and pull out the mains plug. ■ Turn off the tap and call the after-sales service.

4 After-sales service

ecivres selas-retIfAf you cannot rectify a fault yourself, contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Please give customer services the product number (E no.) and the production number (FD) of the appliance.

(1U )'

E no. Product number FD Production number You can find this information *depending on the model: On the inside of the door*/in the opened service flap* and on the rear of the appliance. Trust the expertise of the manufacturer. Contact us for assistance. By doing so, you will ensure that the repairs are carried out by trained service personnel using genuine spare parts.

45 en Consumption rates

[ Consumption rates

setar noimuEnergyCstnpo and water consumption, programme duration and residual moisture for the main washing programmes (approximate values)

Programme Load Energy Water Programme consumption* consumption* duration* Cotton 20 °C 9 kg 0,25 kWh 90 l 2 _ h Cotton 40 °C 9 kg 1,10 kWh 90 l 3 h Cotton 60 °C 9 kg 1,06 kWh 90 l 2 _ h Cotton 90 °C 9 kg 2,14 kWh 100 l 2 _ h Easy-Care 40 °C 4 kg 0,70 kWh 61 l 2 h Mixed Fabrics 40 °C 4 kg 0,60 kWh 45 l 1 ] h Delicates / Silk 30 °C 2 kg 0,19 kWh 37 l _ h Wool 30 °C 2 kg 0,19 kWh 40 l _ h

Programme Approximate information on the residual moisture** WM16... WM14... WM12... WM10... Max. 1600 Max. 1400 Max. 1200 Max. 1000 rpm rpm rpm rpm Cotton 44% 48% 53% 62% Easy-Care 40% 40% 40% 40% Delicates / Silk 30% 30% 30% 30% Wool 45% 45% 45% 45% * The values may deviate from the indicated values depending on water pressure, water hardness, water inlet temperature, ambient temperature, type of laundry, amount and soiling of laundry, detergent used, fluctuations in the power supply and the selected additional functions. ** Information on residual moisture based on programme-dependent spin-speed limit and maximum loads.

46 Technical data en

Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme duration ü Cotton + ú + ü ecoPerfect ¦ 9 kg 4 _ h ü Cotton + ú + ü ecoPerfect ¦ 4,5 kg 4 ^ h ü Cotton + û + ü ecoPerfect ¦ 4,5 kg 4 ^ h Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold water (15 °C). The programme temperature information is based on the temperature stated on the care label for the fabrics. The actual washing temperature may deviate from the stated programme temperature for energy-saving reasons.

J Technical data

atad lacinhcDimensions:Te 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A Nominal power 1900 – 2300 W Water pressure: 100 - 1000 kPa (1 - 10 bar) Power consumption when switched off: 0,12 W Power consumption when left on: 0,43 W

47 en Positioning and connecting

8 Water supply hose on Aqua-Stop 5 Positioning and models connecting @ Water drain hose H Elbow for securing the water gnitcenoc dna gninoitiIncludedPso with the appliance drain hose* P Water supply hose on standard/ Note: Check the machine for transport Aqua-Secure models damage. Never use a damaged * depending on the model machine. If you have any complaints, contact the dealer from whom you In addition, a hose clamp purchased the appliance or our (24 - 40 mm diameter, available from customer services. ~ Page 45 specialist dealers) is required to connect the water drain hose to a siphon. Useful tools ■ Spirit level for aligning ■ Spanner with: – WAF13 for loosening the  transport braces, and – WAF17 for aligning the appliance feet

 Safety instructions # :Warning Risk of injury! ■ The washing machine is very heavy. Be careful when lifting/transporting the washing machine. ■ When the washing machine is lifted + by its protruding parts (e.g. the washing machine door), the components may break off and 3 cause injuries. Do not lift the washing machine by ( Mains cable protruding parts. 0 Bag: ■ If the hose and mains cables are not routed properly, there is a risk of ■ Installation and operating tripping and injury. instructions Lay hoses and cables in such a way ■ Customer services location that there is no risk of tripping. directory* ■ Warranty* Caution! ■ Cover caps for openings after Damage to the appliance the transport braces have been removed Frozen hoses may rip/burst. Do not install the washing machine in ■ Adaptor with sealing washer from 21 mm = ½" to areas exposed to frost or outdoors. 26.4 mm = ¾" *

48 Positioning and connecting en

Caution! Installation on a platform with Water damage drawer The connection points for the water supply hose and water drain hose are Platform order no.: WMZ 20490, under high water pressure. To prevent WZ 20490, WZ 20510, WZ 20520 leaks and water damage, you must follow the instructions in this section. Installing the appliance in a Notes kitchenette ■ In addition to the safety information listed here, the local water and :Warning electricity supplier may have special Danger of death! requirements. There is a risk of electric shock if you ■ If in doubt, have the appliance touch live components. connected by a specialist. Do not remove the appliance covering plate. Installation surface Notes ■ Recess width of 60 cm required. Note: The washing machine be stable ■ Only install the washing machine so that it does not move around. underneath a continuous worktop ■ The installation surface must be firm that is securely connected to and level. adjacent cabinets. ■ Soft floors/floor coverings are not suitable. Removing the transport locks Installation on a base or a Caution! wooden joist floor Damage to the appliance ■ The machine is secured for Caution! transportation using transport locks. Damage to the appliance If the transport locks are not The washing machine may "wander" removed, the drum, for example, and tip/topple from the base when may become damaged when the spinning. machine is operated. The feet of the appliance must be Before using the appliance for the secured with holding brackets. first time, make sure that you Order no. WMZ 2200, WX 9756, completely remove all four transport CZ 110600, Z 7080X0 locks. Keep the locks in a safe place. Note: On wooden joist floors, install the ■ To prevent transport damage from washing machine: occurring if the appliance is moved ■ In a corner, if possible, at a later date, you must refit the ■ On a water-resistant wooden board transport locks before transporting (min. 30 mm thick) which is screwed the appliance. tightly to the floor.

49 en Positioning and connecting

Note: Keep the screws and sleeves in Hose and cable lengths a safe place. ■ Left-hand connection

aFP aFP

1. Take the hoses out of the holders.

aFP PD[FP

■ Right-hand connection

2. Unscrew and remove all four transport brace screws. aFP Remove the sleeves. To do this, aFP remove the mains cable from the holders.

aFP PD[FP

Tip: The following are available from specialist dealers/customer services: Insert the covers. Lock the covers 3. ■ Extension for Aqua-Stop and cold firmly in place by applying pressure water supply hose (approx. 2.50 m); to the snap-in hooks. order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 ■ A longer supply hose (approx. 2.20 m) for standard models; individual component number for customer services: 00353925

50 Positioning and connecting en

Water inlet Optimum water pressure in the supply network :Warning At least 100 kPa (1 bar) Danger of death! 1000 kPa (10 bar) There is a risk of electric shock if you Maximum touch live components. When the tap is open, the water flow Do not immerse the Aqua-Stop safety rate is at least 8 l/min. valve in water (it contains an electric If the water pressure is higher than this, valve). a pressure-reducing valve must be installed. Notes ■ Only operate the washing machine Connection using cold mains water. ■ Do not connect the machine to the Connect the water supply hose to the mixer tap of an unpressurised hot- tap (26.4 mm = ¾") and to the water boiler. appliance (not necessary for Aqua-Stop ■ Do not use a used supply hose. Only models as this is permanently installed): use the supply hose supplied or one that was purchased from an ■ Model: Standard authorised specialist retailer. ■ Do not kink or squash the water supply hose. ■ Do not alter (shorten, cut through) the water supply hose (otherwise its strength is no longer guaranteed). ■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool ■ Model: Aqua-Secure (pliers), the thread may become damaged. ■ When connecting to a 21 mm = ½" tap, first fit an adapter* with a sealing washer from 21 mm = ½" to 26.4 mm = ¾". *supplied depending on the model

■ Model: Aqua-Stop

ê PLQPP

ë

Note: Turn on the tap carefully, checking the leak tightness of the connection points. The screw connection is under mains water pressure.

51 en Positioning and connecting

Water outlet Connection :Warning ■ Drainage into a washbasin Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). Do not reach into the hot water. Caution! ■ Drainage into a siphon The connection point must be Water damage secured using a hose clamp with a If the drain hose slips out of the diameter of 24 - 40 mm (available washbasin or the connection point from specialist dealers). during draining due to high water pressure, any escaping water may cause water damage. Secure the drain hose so that it cannot slip out. Caution! Damage to the appliance/fabrics

If the end of the drain hose is immersed ■ Drainage into a plastic pipe with in the drained water, water may be rubber bushing or into a drainage sucked back into the appliance and pit may damage the appliance/fabrics. Make sure that: ■ The plug does not block drainage from the washbasin. ■ The end of the drain hose is not immersed in the drained water. ■ The water drains away quickly enough. Note: Do not kink the water drain hose or put strain on it lengthways.

52 Positioning and connecting en

Levelling Notes ■ The mains voltage and voltage Align the appliance using a spirit level. indicated on the washing machine Incorrect alignment may result in loud (rating plate) are the same. noises, vibrations and machine The connected load and fuse "movement". required are specified on the rating plate. 1. Loosen the lock nuts using a WAF17 ■ The washing machine is only spanner, by turning it in a clockwise connected to an alternating current direction. supply via a properly installed 2. Check the alignment of the washing earthed socket. machine with a spirit level, and ■ The mains plug fits the socket. adjust it if necessary. Change the ■ The cable cross-section is adequate. height by turning the appliance feet. ■ The earthing system is properly All four appliance feet must stand installed. firmly on the ground. ■ The mains cable is only replaced by 3. The lock nuts on all four appliance a qualified electrician (if this is feet must be screwed tightly against necessary). Replacement mains the housing using a suitable WAF17 cables are available from customer spanner. In doing so, hold the foot services. tight and do not adjust its height. ■ No multiple plugs/couplings or extension cables are used. ■ If an earth-leakage circuit breaker is used, only a type which displays the z symbol is used. Only this symbol guarantees compliance with the currently applicable regulations. ■ The mains plug can be accessed at all times. Electrical connection ■ The mains cable is not kinked, squashed, altered or cut through. :Warning ■ The mains cable does not come into Danger of death! contact with heat sources. There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. ■ Never unplug the mains plug during operation. Observe the following information and ensure that:

53 en Positioning and connecting

Before washing for the first Transportation time E.g. when moving house The washing machine was thoroughly tested before leaving the factory. To Caution! remove any water that may be left over Risk of damage to the appliance from the test, run the first wash cycle caused by detergent/fabric softener without any laundry. leaking from the dispensers. Leaking detergent/fabric softener can Notes prevent the appliance from working ■ The washing machine must be correctly, e.g. due to damage to the correctlyinstalled and connected. electronics. (from ~ Page 48). Empty the dispensers before ■ Never use a damaged machine. transporting the appliance. Inform your customer services. Preparatory work: Preparatory work: 1. Turn off the tap. 1. Check the machine. 2. Reduce the water pressure in the 2. Fill the ß and i dispensers. supply hose: ~ Page 40; cleaning ~ Page 31 and maintenance – filter in the water 3. Remove the protective film from the supply clogged control panel. 3. Disconnect the washing machine 4. Connect the mains plug. from the mains. 5. Turn the tap on. 4. Drain any residual water: ~ Page 39; cleaning and Run the programme without laundry. maintenance – drain pump blocked, 1. Switch on the appliance. emergency draining 2. Close the door (do not load any 5. Remove the hoses. laundry). 6. Empty the dispensers. ~ Page 38 3. Set the Drum clean 90 °C programme. 4. Open the detergent drawer. 5. Pour approx. 1 litre of water into compartment À Á. 6. Pour standard detergent into compartment À Á. Note: To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergent designed for woollens or delicates. 7. Close the detergent drawer. 8. Press the Ü button. 9. Switch off the appliance at the end of the programme. Your washing machine is now ready to use.

54 Aqua-Stop warranty en

Installing the transport braces: 1. Remove the covers and keep them r Aqua-Stop warranty in a safe place.

Use a screwdriver if necessary. ytnarwra poSt-aOnlyAuq for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water damage is caused due to a fault in our Aqua-Stop system, we 2. Insert all four sleeves. will compensate domestic Clip the mains cable securely in the customers for the damage caused. holders. Insert and tighten the 2. The liability guarantee is valid for the screws. service life of the appliance. 3. It is a prerequisite of all warranty claims that the appliance with Aqua- Stop must have been installed and connected correctly in accordance with our instructions; this also includes a correctly fitted Aqua-Stop extension (genuine accessories). Our warranty does not cover defective feed lines or fittings Before switching on the appliance leading to the Aqua-Stop connection again: at the tap. 4. Appliances with Aqua-Stop do not Notes need to be supervised during ■ Always remove the transport braces. operation, nor secured afterwards by ■ To prevent unused detergent from turning off the tap. flowing straight into the drain during The tap only needs to be turned off if the next wash: Pour approx. 1 litre of you are away from home for a long water into compartment À Á and period, e.g. for several weeks' start the Drain programme. holiday.

55 Repair order and advice in the event of faults GB 0344 892 8999 (Calls charged at local or mobile rate.) IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com

Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG

*9001107333* 9001107333 (9511)