Hearts Bed with 4 Poster Frame
Total Page:16
File Type:pdf, Size:1020Kb
Hearts Bed With 4 Poster Frame Assembly Instructions - Please keep for future reference 323/8130 333/9613 Dimensions Width - 197cm Depth - 94cm Height - 189cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800 Issue 1 - 08//10/14 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Keep children and animals • We do not IMPORTANT! away from the work area, small recommend the KEEP FOR parts could choke if swallowed. use of power drill/drivers for • Make sure you have enough FUTURE inserting screws, space to layout the parts before as this could damage the unit. REFERENCE starting. Only use hand screwdrivers. • Check you have all the • During assembly do not stand • Assemble on a soft level components and tools listed on or put weight on the product, this surface to avoid damaging the the following pages. could cause damage. unit or your floor. • Remove all fittings from the • Assemble the item as close to • Parts of the assembly will be plastic bags and separate them its final position (in the same easier with 2 people. into their groups. room) as possible. • Unit weight: 20.4 kgs. Care and maintenance • Only clean using a damp cloth • From time to time check that • This product should not be and mild detergent, do no use there are no loose screws on discarded with household bleach or abrasive cleaners. this unit. waste. Take to your local authority waste disposal centre. Warnings • Regularly check and ensure • Prohibit your children from • Do not use this child’s bed if that all bolts and fittings are bouncing and jumping on the any part is broken, torn or tightened properly. bed. missing. • The recommended mattress • Do not place this child’s bed • THIS BED COMPLIES WITH size is L1900 x W910 mm. near heat sources, windows BS8509:2008+A1:2011 (blind cords, curtain pulls or • This product should only be Manufacturer: BL Packaging Co. other strings or cords) and other used on firm, level ground. Ltd. furniture • Make sure the legs remain in • Place the bed tight to any wall contact with the ground. or have a gap of 300mm • Not suitable for children under between the wall and the side of 4 years. the bed. Handy Hints Note: if required the next • Assemble all parts and bolts • Regularly check and ensure page can be cut out and used loosely during assembly, only that all bolts and fittings are as reference throughout the once the product is complete tightend properly. assembly. Keep this page with should you fully tighten the bolts. these instructions for future reference. 1 If you have damaged or missing components, call the Components - Parts Customer Helpline: Argos = 0345 640 0800 Please check you have all the parts listed below 1 Headboard 2 Footboard 3 Headboard leg x 2 (94 x 63 x 3.2cm) (94 x 76 x 3.2cm) (38 x Ø3.2cm) 4 Siderail x 2 5 Headboard Upper Post x 2 (191.5 x 11 x 2.5cm) (100 x 6.5 x Ø3.2cm) 6 Footboard Upper Post x 2 7 Top Rail Long x 2 (120 x 6.5 x Ø3.2cm) (191 x Ø1.6cm) 8 Top Rail Short x 2 9 Slat x 24 (87.5 x Ø1.6cm) (91 x 4 x 2.5cm) 2 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A B C M6 x 45mm Bolt x 4 M6 x 25mm Bolt x 4 M6 x 12mm Bolt x 12 D E F Bolt nut x 4 Mattress stopper x 4 Allen key x 2 Ruler - Use this ruler to help correctly identify the screws 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 3 Assembly Instructions Step 1 1 Assembling headboard legs Insert headboard legs 3 into holes on headboard 3 1 as shown. 3 1 3 Step 2 Assembling headboard 1 D Attach siderails 4 to headboard 1 & 3 as D B shown and fix through holes using bolts B and 3 D 4 bolt nuts . B Important: Fasten bolts & 1 nuts using 2 allen D keys F but do not D B fully tighten at this B D stage. D B 4 3 B 3 4 4 Assembly Instructions Step 3 C 2 Assembling footboard 4 Attach footboard 2 to siderails 4 as shown C and fix through2 holes using bolts C . Important: Fasten bolts using allen key F but do not fully tighten at this stage. C 4 C 4 C 2 C Step 4 8 Assembling short top C rails C 5 Attach upper posts 5 5 8 & 6 into holes on short top rail 8 as shown and fix through holes using bolts C . Important: C Fasten bolts nuts using allen key F 5 but do not fully C tighten at this 6 stage. 8 C 6 5 Assembly Instructions Step 5 a: 5 Attaching upper rails a: Insert headboard upper post 5 onto posts of headboard 1 as 5 1 shown. 5 b: Fix through holes using bolts C as shown. C b: Important: C 5 Fasten bolts using 6 1 allen key F but do not fully tighten at C this stage. 6 C 1 Repeat above steps to assemble the footboard C upper post 6 . 1 6 Step 6 A A Assembling top rails 7 5 Attach top rails 7 to 5 7 upper rails 5 & 6 as A shown and fix through A holes using bolts A . 6 6 Important: Fasten bolts 7 using allen key F but do not fully tighten at this stage. 6 A 6 Assembly Instructions Step 7 9 Attaching slats Insert each slats 9 into holes on side rails 4 . 4 Lock it into position by pushing firmly down with your hand. Note: Make sure the slat is aligned to the hole before pushing it firmly down. Important: After all slats are 4 9 x24 positioned, tighten all bolts & nuts 4 fixed in previous steps using allen keys F . Step 8 E Attaching mattress stoppers 4 Insert the mattress stoppers E into holes on the side rails 4 as shown. Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800 7.