Ipfire Forum Archive Search

Who Is Online! for the IPFire - forum.ipfire.org 1/13/21, 7:37 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

* Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire , 96 posts Post Reply & + Search this topic ... ! " - 1 2 3 4th 5 ... 7th '

Who Is Online! for the IPFire 0 sfeddersen Community Developer / by sfeddersen » October 7th, 2014, 4:54 pm

Hello forum, the Posts: 53 Joined: October 12th, 2012, 1:15 pm beginning has been made ....

Until I have ﬁnished porting the addon there is still a long way to go ....

Greetings

sfeddersen

Last edited by sfeddersen on October 7th, 2014, 7:23 pm, edited 1 time in total. .

Re: Who Is Online! for the IPFire 0 ummeegge Community Developer / by ummeegge » October 7th, 2014, 5:29 pm

Hello sfeddersen, Posts: 5001 that looks really nice . Do you have an idea when what can be found in Git for testing purposes? Joined: October 9th, 2010, 10:00 am

Regards,

Re: Who Is Online! for the IPFire 0 sfeddersen Community Developer / by sfeddersen » October 7th, 2014, 7:22 pm

No, I haven't at the moment. Posts: 53 Joined: October 12th, 2012, 1:15 pm Greetings

sfeddersen .

Re: Who Is Online! for the IPFire 0 hetim / by hetim » October 8th, 2014, 7:33 am Posts: 13 Joined: December 6th, 2011, 3:09 pm Hello sfeddersen.

Great - I've been waiting for this add-on since I switched from Cop to Fire. Please go ahead and let's test soon.

Greetings Heiko .

Re: Who Is Online! for the IPFire 0 sfeddersen Community Developer / by sfeddersen » October 10th, 2014, 4:12 pm

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm I think I'll stay on the ball.

It just takes time.

Greetings

Stephan .

Re: Who Is Online! for the IPFire 0 tannic / by gerbsch » December 19th, 2014, 2:18 pm Posts: 47 Joined: March 11th, 2013, 2:31 pm What is the addon about? How's it going?

Re: Who Is Online! for the IPFire 0 qiller / by qiller » December 21st, 2014, 11:21 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Hu,

know the addon still ausm cop. It regularly pings to speciﬁed hosts and then divides eg by email with whether the hosts are still available. For simple monitoring I ﬁnd the whole thing very pleasant and not as overloaded as Nagios / Icinga.

But I can only speculate why it takes a little longer. I guess the whole mail functionality is a lot of work. This is already a standard feature in the IPCop2. However, the old cop didn't have any email functionality either and sfeddersen simply built it into the add-on.

Take a look. I would deﬁnitely be interested.

mfg Oli .

Re: Who Is Online! for the IPFire 0 qiller / by qiller » March 30th, 2015, 10:16 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Hu sfeddersen, I

want to ask carefully how the stand is.

mfg Oli .

Re: Who Is Online! for the IPFire 0 sfeddersen Community Developer / by sfeddersen » March 31st, 2015, 3:42 pm

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm I'm ready to successfully build the ﬁrst addon package.

This is what copymaster is currently testing.

In the course of the next few days I may get to the point where a ﬁrst test version can be published.

Greetings

sfeddersen .

Re: Who Is Online! for the IPFire 0 / by FischerM » March 31st, 2015, 4:42 pm

Hello Stefan,

FischerM If you still need more testers - I am ready for (almost) every outrage ... Community Developer

Greetings Posts: 1025 Matthias Joined: November 2nd, 2011, 12:28 pm .

Re: Who Is Online! for the IPFire 0 sammydk / by sammydk » April 4th, 2015, 2:56 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello sfeddersen, Location: NRW we had a similar approach a long time ago. viewtopic.php? f = 6 & t = 5959 & p = 45667 # p45667 Here the user Werner had improved a script of the CT and got it to run on IPFIRE. Is it possible to integrate this approach in your ADDON? From a certain time (can be changed per day), the script asks certain speciﬁed IPs or IP-Rages whether they are online or not, after none of the IPs is in the network, the IPFIRE shuts down after a delay time. Since the shutdown only takes e!ect after a certain time, the IPFIRE runs through without this query. Take a look at the script. I've been using it myself since WERNER posted it here to shut down my IPFIRE at night. I wake up every morning via WOL from an AP. Even if a USER has to go back to the Internet during this time when the IPFIRE is OFF, he can wake up the IPFIRE via local WOL and that also works, even if he does not have an IP from the network. Has something of a Green IT approach. It would be great if this could be integrated into your ADDON, possibly only in the second version.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 0 dukemaster / by dukemaster » May 13th, 2015, 10:14 pm Posts: 11 Joined: May 21st, 2011, 9:41 am Hello everyone,

if testers are still wanted, I would be happy to o!er myself.

Greetings Matze .

Re: Who Is Online! for the IPFire 0 qiller / by qiller » August 22nd, 2015, 1:18 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm You want to knock carefully to see if something has happened.

Re: Who Is Online! for the IPFire 0 sfeddersen Community Developer / by sfeddersen » August 26th, 2015, 8:53 am

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm yes, work in progress. I'm currently waiting for the next release, in which the mail function is integrated. When this version is online, I will make the ﬁrst WIO version available for a public test.

Greetings

sfeddersen .

Re: Who Is Online! for the IPFire 0 sammydk / by sammydk » August 26th, 2015, 2:28 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hi, have you read my post with the who is online script from user Werner? Location: NRW Can you also integrate it there, as it is certainly interesting as a delicacy. Here again briefly the functional explanation. Queries within a flexible time window ~ 23:00 - 04:00 times as an example of the IP networks Geen, Blue, OVPN, with a flexible query time every 5- ?? Minutes if time window is active. Then the possibility of querying IP ranges or individual IPs. If none of the IP's is online and the time window is active, the IPFIRE shut down.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

, , 96 posts Post Reply & + 1 - 1 2 3 4th 5 ... 7th '

( Return to "development"

% Home ‹ index ) Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe Page 1 of 2 Who Is Online! for the IPFire - Page 2 - forum.ipfire.org 1/13/21, 7:38 PM

forum.ipfire.org The old IPFire Forum Archive Search… ! "

+ Quick links # FAQ $ Login

% Home ‹ Index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire - 96 posts Post Reply & , Search this topic… ! " . ' 1 2 3 4 5 … 7 (

Re: Who Is Online! for the IPFire 1 Delta 0 by Delta » September 25th, 2015, 1:57 pm Posts: 57 Joined: November 21st, 2010, 4:20 pm How is the act. Status????

Re: Who Is Online! for the IPFire 1 GaaD 0 by GaaD » October 17th, 2015, 11:13 pm Posts: 4 Joined: October 28th, 2014, 1:01 am Hallo Sorry for my English I use cgi script from my old router on NND Linux (old Polish distro). I am not the author of the script. I corrected him only. As first Install nmap with pakfire. The script is best placed here: / srv / web / ipfire / cgi-bin Must have executable rights. You need to edit that IP addresses you want to display in the section LISTIP. Each line in the section LISTIP must be terminated with \ URL in your browser: https: // IP of your IpFire: 444 / cgi-bin / status.cgi

CODE: SELECT ALL

#!/bin/sh # Written by Maciek 'Mac!eKs' Sitarz - macieksfreesco.pl # Version 060624 #set -x

LISTIP="192.168.100.2 192.168.100.3 192.168.100.4 192.168.100.5 192.168.100.6 \ 192.168.100.10 192.168.100.11 192.168.100.12 192.168.100.13 192.168.100.14 "

C=`/bin/date +%H:%M` cat <<-! Content-type: text/html

I hope that helped GaaD /

Re: Who Is Online! for the IPFire 1 ummeegge Community Developer 0 by ummeegge » October 18th, 2015, 7:51 am

Hi all, Posts: 5001 @GaaD Joined: October 9th, 2010, 10:00 am nice idea . This is surley not a substitute for sfeddersen´s work but as a short one another bash<-->cgi hack...

Under /srv/web/ipﬁre/cgi-bin a new dir called user with a nmap.cgi in it.

nmap.cgi content:

CODE: SELECT ALL

#!/bin/bash -

# Name: nmap.cgi ########################################## # Bash cgi Ausgabe ueber den Browser # ummeegge[at]ipfire.org 18.10.2013 ##########################################

# HTML echo "Content-type: text/html; charset=utf-8"; echo;

# HTML locations footer="/srv/web/ipfire/html/docs/footer.txt";

should investigate the IPs automatically but needs also little time so stay tuned...

also under /srv/web/ipﬁre/html/ a new dir called /docs with a 'header.txt' , 'footer.txt' and a 'line.txt'

header.txt content:

CODE: SELECT ALL

User definierte Bash Skripte auf Basis eines IPFire Systems

System Status Ausgabe:

footer.txt content:

CODE: SELECT ALL

ENDE Der Ausgabe

line.txt content:

CODE: SELECT ALL

As a beside info.

Greetings,

Re: Who Is Online! for the IPFire 1 GaaD 0 by GaaD » October 18th, 2015, 5:50 pm Posts: 4 Joined: October 28th, 2014, 1:01 am Hi many thanks that looks a lot better and deﬁnitely is more safe. Already working on my IPFire. Greetings GaaD /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 29th, 2015, 10:19 pm

Hello Posts: 53 Joined: October 12th, 2012, 1:15 pm everyone, I can ﬁnally provide you with the ﬁrst ALPHA version of the WIO add-on for IPFire for testing.

Download the package at http://www.h-loit.de/extern/ipﬁre/wio-1.0.30-1.ipﬁre.

Installation:

Copy the package to the IPFire, execute the command tar xvf wio-1.0.30-1.ipfire -C / opt / pakfire / tmp in the same directory . Then change to the directory / opt / pakfire / tmp and execute the command export NAME = wio . Then run ./install.sh . Now the WIO add-on should be installed on the IPFire. It can be found under the menu item "Status".

I appreciate your feedback and help with the English translation!

Greetings

sfeddersen /

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 30th, 2015, 12:37 am

Hello Stefan,

FischerM ... what takes a long time ... Community Developer

great! I was just really happy that it still worked and that I was already working on it. Posts: 1025 Joined: November 2nd, 2011, 12:28 pm First feedback: 1. The installation on a fresh Core95 installation was inconspicuous, but the command "EXPORT ..." likes * no * spaces. (Copy & paste was my enemy ...)

2. GUI and settings look ok and familiar, but despite running clients the respective status is not updated:

The client added via ARP has "no status" and those added by hand are permanently "inactive" "although deﬁnitely" online ".

3. There were complaints in the '/ var / log / httpd / error_log':

CODE: SELECT ALL

... Use of uninitialized value $mailsettings{"USEMAIL"} in string eq at /srv/web/ipfire/cgi-bin/wio.cgi line 155., referer: https://192.168.XXX.YYY:444/cgi-bin/index.cgi Use of uninitialized value within %netsettings in string ne at /srv/web/ipfire/cgi-bin/wio.cgi line 162., referer: https://192.168.XXX.YYY:444/cgi-bin/index.cgi Use of uninitialized value within %netsettings in string ne at /srv/web/ipfire/cgi-bin/wio.cgi line 162., referer: https://192.168.XXX.YYY:444/cgi-bin/index.cgi Use of uninitialized value $message in numeric eq (==) at /srv/web/ipfire/cgi-bin/wio.cgi line 787., referer: https://192.168.XXX.YYY:444/cgi-bin/index.cgi Use of uninitialized value $message in numeric eq (==) at /srv/web/ipfire/cgi-bin/wio.cgi line 866., referer: https://192.168.XXX.YYY:444/cgi-bin/index.cgi Use of uninitialized value $mailsettings{"USEMAIL"} in string eq at /srv/web/ipfire/cgi-bin/wio.cgi line 155., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value within %netsettings in string ne at /srv/web/ipfire/cgi-bin/wio.cgi line 162., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value within %netsettings in string ne at /srv/web/ipfire/cgi-bin/wio.cgi line 162., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value $message in numeric eq (==) at /srv/web/ipfire/cgi-bin/wio.cgi line 787., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value $message in numeric eq (==) at /srv/web/ipfire/cgi-bin/wio.cgi line 866., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value $arphost in string eq at /srv/web/ipfire/cgi-bin/wio.cgi line 1748., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value $arphost in concatenation (.) or string at /srv/web/ipfire/cgi-bin/wio.cgi line 1749., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi Use of uninitialized value in concatenation (.) or string at /srv/web/ipfire/cgi-bin/wio.cgi line 1969., referer: https://192.168.XXX.YYY:444/cgi-bin/wio.cgi

Sorry, that was a bit long, but maybe it will help. Did I ignore something?

Greetings, Matthias /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 11:19 am

Hello Matthias, Posts: 53 Joined: October 12th, 2012, 1:15 pm thanks for the ﬁrst response.

Can you please run the / var / ipﬁre / wio ./wio.pl -d directory on the console and post the output here?

Is there a ﬁle called wio in /etc/frcon.minutly?

You can ignore the error messages in the httpd error.log or deactivate it in the wio.cgi if it bothers you. To do this, in line 30 of the wio.cgi simply use warnings; comment out.

I also set up a fresh Core95 here.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 30th, 2015, 11:41 am

Hello Stephan,

FischerM The output '/var/ipﬁre/wio/wio.pl -d' pissed o!. The machine is a test machine and OFFLINE (Sorry - my mistake - I forgot to mention Community Developer this morning, it was a little early ...): Posts: 1025 CODE: SELECT ALL Joined: November 2nd, 2011, 12:28 pm

[root@ipfiretest ~]# /var/ipfire/wio/wio.pl -d Could not open /var/ipfire/red/iface at /var/ipfire/general-functions.pl line 1118.

I've just given it a static IP, output now:

CODE: SELECT ALL

[root@ipfiretest fcron.minutely]# /var/ipfire/wio/wio.pl -d

HOSTNAME : ipfiretest.localdomain TIMEOUT : 01 Sekunde(n) MAILSTYLE : email RED TYPE : STATIC RED DEVICE : red0 RED ADDRESS : 10.213.1.1 SHUTDOWN : off

Suche im lokalen Netzwerk nach aktiven Hosts ...

ID IP-Adresse Ping DynDNS Status Mail Antwortzeit Antwort ------

The status of 'FS3' has changed accordingly in the GUI - it is now " ACTIVE ". Should I test this afternoon on the productive computer !?

1 sfeddersen wrote: Is there a ﬁle named wio in /etc/frcon.minutly?

And:

CODE: SELECT ALL

[root@ipfiretest fcron.minutely]# ls -l total 8 -rw-r--r-- 1 root root 36 Dec 3 20:24 info.txt -rwxr-xr-x 1 root root 397 Dec 29 22:56 wi

EDIT : Second attempt, looks better - GUI works too!

CODE: SELECT ALL

[root@ipfiretest fcron.minutely]# /var/ipfire/wio/wio.pl -d

HOSTNAME : ipfiretest.localdomain TIMEOUT : 01 Sekunde(n) MAILSTYLE : email RED TYPE : STATIC RED DEVICE : red0 RED ADDRESS : 10.213.1.1 SHUTDOWN : off

Suche im lokalen Netzwerk nach aktiven Hosts ...

ID IP-Adresse Ping DynDNS Status Mail Antwortzeit Antwort ------

Greetings, Matthias /

Re: Who Is Online! for the IPFire 1 qiller 0 by qiller » December 30th, 2015, 4:18 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Finally!

Thank you Stefan. Of course I tried it out right away. For me, sending emails only works for the ﬁrst polling after adding the host. If I switch o! a host and wait for the polling time, the host is correctly recognized as inactive in the WIO web interface, but an email is not sent (although activated). It is exactly the same when the host is switched on again, no emails are sent here either.

Otherwise, thumb up, felt like being on the old cop right at home: F.

mfg Oli /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 4:24 pm

@Matthias, Posts: 53 Joined: October 12th, 2012, 1:15 pm ok, so there is a bug if the red interface is not properly configured or the iface file is not available in the / var / ipfire / red directory.

I will ﬁx it in the next version!

Does the mail dispatch work as desired for you?

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 30th, 2015, 4:30 pm

Hello Stephan,

FischerM 1. WIO is now running productively - looks very good! Community Developer

2. I have not yet tested sending mail ... Posts: 1025 Joined: November 2nd, 2011, 12:28 pm 3. Suggestions for translations in the 'wio.en.pl':

CODE: SELECT ALL

... 'wio_msg_right' => 'is being examined.', ... 'wio_error_function' => 'This function is temporarily unavailable, because in the background client states are being updated (active/inactive).', 'wio_shutdown' => 'Shutdown when all clients are "offline"?', ...

4. In the 'wio.de.pl' an assignment is missing: 'wio_net_scan_vl' => '', [I don't know myself]

5. Tip counter found: 'wio_allready_running' => 'wio_already_running' (in 'wio.de/ en.pl '+' wio.cgi ')

Many greetings, Matthias /

Re: Who Is Online! for the IPFire 1 qiller 0 by qiller » December 30th, 2015, 4:34 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Ahhh, it seems to work with "single mails", it seemed so familiar to me. I think I had a similar problem on the cop. At ﬁrst I thought it was due to the non-pingable host, but you are also testing via ARP (works ﬁne with hosts in the DMZ, too). So with "individual mails" loifts (as our trainees always like to say ).

mfg Oli

Last edited by qiller on December 30th, 2015, 4:38 pm, edited 1 time in total. /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 4:37 pm

@Matthias, Posts: 53 Joined: October 12th, 2012, 1:15 pm to 1. But please remember that this is an ALPHA ....

to 2. Can you please mavhen on occasion?

to 3. I will take over.

to 4. The 'wio_net_scan_vl' is missing, is due to the English translation. That's OK.

to 5. Will be changed.

Thanks for the feedback so far!

Greetings

Stephan

Last edited by sfeddersen on December 30th, 2015, 4:38 pm, edited 1 time in total. /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 4:38 pm

@Oli, Posts: 53 Joined: October 12th, 2012, 1:15 pm if I understand you correctly, does the problem only occur with the collective mails?

Thanks for testing.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 qiller 0 by qiller » December 30th, 2015, 4:43 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Yep, with "bulk mails" he sends the email once (that the host is online) after I've added the host. If status changes (online / o"ine) occur afterwards, he no longer sends any emails. Single emails work, however. The problem seems very familiar to me, I can swear that WIO already had this or a similar problem on the IPCop.

mfg Oli /

- - 96 posts Post Reply & , 2 . ' 1 2 3 4 5 … 7 (

) Return to “Entwicklung”

% Home ‹ Index * Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=15 Page 1 of 2 Who Is Online! for the IPFire - Page 3 - forum.ipfire.org 1/13/21, 7:40 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

+ Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire - 96 posts Post Reply & , Search this topic ... ! " . ' 1 2 3 4th 5 ... 7th (

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 4:53 pm

@Oli, Posts: 53 Joined: October 12th, 2012, 1:15 pm I have to look at it.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 30th, 2015, 4:57 pm

Hello Stephan,

FischerM 1 sfeddersen wrote: Community Developer But please remember that this is an ALPHA ... Posts: 1025 Sure - the last full backup is about 2 hours old ... Joined: November 2nd, 2011, 12:28 pm

I still have to set up mailing, it has never been used until now.

Many greetings, Matthias /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 30th, 2015, 5:01 pm

@Matthias, Posts: 53 Joined: October 12th, 2012, 1:15 pm everything is clear.

I ﬁxed the bug with the red interface and incorporated the changes you suggested.

I will probably issue a new ALPHA tomorrow.

Let's see what will come before then.

@Oli,

I have to take a closer look at the bug with the collective mail . Will not be ﬁxed with the version tomorrow, but is on the to-do list ....

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » December 30th, 2015, 6:23 pm Posts: 697 Joined: November 8th, 2015, 8:54 am Hi,

I have installed the whole thing on Core 95 now.

After a manual refresh, which, by the way, took forever, I initially thought the respective hosts (32) would have to assemble in the network in the "Clients" area. But that wasn't the case until I discovered the import button (s) below and imported the clients from my hosts. Well, this is a user error.

After that, the clients were all listed for the ﬁrst time. But they are all listed as inactive , including the client from which I am currently writing this post.

Well, I thought press the refresh button in the respective line (!) Of the client concerned. After this took forever (via ping), the client was still marked as inactive. I had the impression that a single refresh pinged the entire client and not the one that I actually wanted to update.

I think the long refresh time is also related to my network: 192.168.0.1/16

Ah, now an e-mail has just arrived that the said client is online. Why does an e-mail come if the corresponding options are not activated on the client? In addition, I am still getting a lot of emails that tell me the inactive status of the other clients. That's not normal either, is it? See also screenshots with the global options and the screenshot of one of the clients.

What also amazes me is why the Mac address is listed in the ARP list for some clients and not for some. Does the Mac address only exist when the device is switched on?

Michael

ATTACHMENTS

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 30th, 2015, 10:03 pm

Hi,

FischerM a few comments: Community Developer

Depending on the FORWARD or OUTGOING ﬁrewall (both are set to BLOCKED by default!) You may need additional rules to avoid Posts: 1025 something like that: Joined: November 2nd, 2011, 12:28 pm

Funnily enough, the source IPs are the internal, green IP of the IPFire, on the other hand the external, red one. In order to prevent the FW log from ﬁlling up senselessly, I had to set two suitable FW rules for ICMP ECHO (7) in the OUTGOING:

The connections match during an update:

If someone knows a more elegant solution for this, go ahead .

For mailing: It only works once (single mails) so far:

Test computer shut down ('tail -f / var / log / mail' on the monitoring productive machine): Dec 30 22:15:16 ipfire dma [1a0005]: new mail from user = root uid = 8 envelope_from = < [email protected]> Dec 30 22:15:16 ipfire dma [1a0005]: mail to = < matthias.fischer@ipfire.org> queued as 1a0005.9624a38 Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: trying delivery Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: using smarthost (securesmtp.t-online.de:587 ) Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: trying remote delivery to securesmtp.t-online.de [194.25.134.110] pref 0 Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: Server greeting successfully completed Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: Server supports STARTTLS Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: SSL initialization successful Dec 30 22:15:16 ipfire dma [1a0005 .9624a38]: Server greeting successfully completed Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: Server does not support STARTTLS Dec 30 22:15:16 ipfire dma [1a0005.9624a38]: Server supports LOGIN authentication Dec 30 22:15:16 ipfire dma [1a0005 .9624a38]: using SMTP authentication for user [email protected] Dec 30 22:15:17 ipfire dma [1a0005.9624a38]: delivery successful

=> we get a mail:

Header: Wed, 30 Dec 2015 22:15:16 +0100

Body: Date: Wed, 30.12.2015 22:15 : 02

Client: ipﬁretest IP: 192.168.100.251 Status: INACTIVE Remark: Test

computer

############## Test computer switched on again, WIO sends an email, ...: Dec 30 22:20:12 ipfire dma [1a0005]: new mail from user = root uid = 8 envelope_from = < [email protected]> Dec 30 22:20:12 ipfire dma [1a0005]: mail to = < matthias.fischer@ipfire.org> queued as 1a0005.922d7d8 Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: trying delivery Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: using smarthost (securesmtp.t-online.de:587 ) Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: trying remote delivery to securesmtp.t-online.de [194.25.134.46] pref 0 Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: Server greeting successfully completed Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: Server supports STARTTLS Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: SSL initialization successful Dec 30 22:20:12 ipfire dma [1a0005 .922d7d8]: Server greeting successfully completed Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: Server does not support STARTTLS Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: Server supports LOGIN authentication Dec 30 22:20:12 ipfire dma [1a0005 .922d7d8]: using SMTP authentication for user [email protected] Dec 30 22:20:12 ipfire dma [1a0005.922d7d8]: delivery successful

... but nothing arrives ...

EDIT / CORRECTION: the single mail just arrived! Test computer is active again! It just took a little longer ...

The refresh is much faster here, it never takes more than 4-5 seconds. Total runtime with 10 conﬁgured clients: ~ 10 seconds:

CODE: SELECT ALL

root@ipfire: /var # /var/ipfire/wio/wio.pl -d

HOSTNAME : ipfire.localdomain TIMEOUT : 01 Sekunde(n) MAILSTYLE : email RED TYPE : PPPOE RED DEVICE : ppp0 RED ADDRESS : [gelöscht] SHUTDOWN : off

Suche im lokalen Netzwerk nach aktiven Hosts ...

ID IP-Adresse Ping DynDNS Status Mail Antwortzeit Antwort ------

Many greetings, Matthias /

Re: Who Is Online! for the IPFire 1 0 by FischerM » December 31st, 2015, 10:38 am

Hello,

FischerM 1 Hellfire wrote: Community Developer Why does an e-mail come if the corresponding options are not activated on the client? Posts: 1025 I can confirm it is the same here. Although (individual) mails should only be sent to one client, I always receive an e-mail when a client Joined: November 2nd, 2011, 12:28 pm starts or stops and the mail options are definitely switched o! .

1 Hellﬁre wrote: why the Mac address is listed in the ARP list for some clients and not for some.

I can conﬁrm this too.

Many greetings and a happy new year ...! (There was something else ...)

Matthias /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 31st, 2015, 12:31 pm

Hi there, Posts: 53 Joined: October 12th, 2012, 1:15 pm 1 Hellﬁre wrote: why the Mac address is listed in the ARP list for some clients and not for some.

1 FischerM wrote: I can conﬁrm this too.

The clients in the list "Add client from the ARP table:" is actually exactly the same list as under "Status" - "Network (other)" entries in the ARP table.

In my opinion, the MAC addresses are only displayed for active clients.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 31st, 2015, 12:32 pm

Posts: 53 1 FischerM wrote: Joined: October 12th, 2012, 1:15 pm

1 Hellﬁre wrote: Why does an e-mail come if the corresponding options are not activated on the client?

I can conﬁrm it is the same here. Although (individual) mails should only be sent to one client, I always receive an e-mail when a client starts or stops and the mail options are deﬁnitely switched o! .

Hmm, I can't understand that here on my test machine.

I have to research further ...

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » December 31st, 2015, 12:34 pm

@ Hellﬁre, maybe Posts: 53 Joined: October 12th, 2012, 1:15 pm it's really because of the large network.

Can you run ./wio.pl -d in the / var / ipﬁre / wio directory on the console and post it here?

There you can see how long a "refresh" of all clients really takes.

How is the network area displayed for "Search green network at green0:"?

Thanks!

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » January 3rd, 2016, 10:15 am Posts: 697 Joined: November 8th, 2015, 8:54 am Hello Stephan,

1 sfeddersen wrote: Can you run ./wio.pl -d in the / var / ipﬁre / wio directory on the console and post it here? Here you can see how long a "refresh" of all clients really takes.

CODE: SELECT ALL

HOSTNAME : ipfire.ourhome TIMEOUT : 01 Sekunde(n) MAILSTYLE : smail RED TYPE : DHCP RED DEVICE : red0 RED ADDRESS : 178.xx.x.xxx SHUTDOWN : off OVPN PID : 6953

Suche im lokalen Netzwerk nach aktiven Hosts ...

ID IP-Adresse Ping DynDNS Status Mail Antwortzeit Antwort ------1 192.168.0.1 ip off Active ---- 0.0000 sek ARPSCAN

It takes a long time until the ﬁrst IP address appears after the script has been executed, i.e. the IP that is listed with ID 1. The IP 192.168.0.1 there is actually the router itself and the host that is pinged is an entry for distributing the wpad ﬁle to the clients according to instructions from the wiki.

As a test, I set this IP or the host to inactive in your module (under clients :) and called the script again. But the result is the same, now it takes longer until the next IP (192.168.6.1) appears.

1 sfeddersen wrote: How is the network area displayed for "Search green network at green0:"?

The range is from 192.168.0.1 to 192.168.255.254.

Thanks and regards, Michael

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » January 3rd, 2016, 12:49 pm

Hello Michael, Posts: 53 Joined: October 12th, 2012, 1:15 pm yes, that will be due to the large green network area.

When checking the clients, an "arpscan" is ﬁrst carried out on all network interfaces. Only then is a "ping" checked.

The "arpscan" will ensure that it feels like an eternity before the test starts.

For testing purposes, you could comment out line 118-133 in wio.pl and then run ./wio.pl -d again and post the output here.

Thanks a lot for this.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 XerXes 0 by XerXes » January 3rd, 2016, 6:54 pm Posts: 157 Joined: February 19th, 2011, 3:11 pm Location: Germany 1 Hellﬁre wrote:

1 sfeddersen wrote: How is the network area displayed for "Search green network at green0:"?

The range is from 192.168.0.1 to 192.168.255.254.

Thanks and regards, Michael

excerpt from the Arpscan manpage

1 The time taken to perform a single-pass scan (ie with --retry = 1) is given by:

time = n * i + t + o

Where n is the number of hosts in the list, i is the time interval between packets (specified with --interval, or calculated from --bandwidth), t is the timeout value (specified with --timeout) and o is the overhead time taken to load the targets into the list and read the MAC / Vendor mapping files. For small lists of hosts, the timeout value will dominate, but for large lists the packet interval is the most important value.

With 65,536 hosts, the default bandwidth of 256,000 bits / second (which results in a packet interval of 2ms), the default timeout of 100ms, and a single pass (--retry = 1), and assuming an overhead of 1 second, the scan would take 65536 * 0.002 + 0.1 + 1 = 132.172 seconds, or about 2 minutes 12 seconds.

therefore an increase to 1Mbit could improve the whole thing signiﬁcantly. '' --bandwidth = 1M ''

also stumbled over here:

1 The list of target hosts is stored in memory. Each host in this list uses 28 bytes of memory, so scanning a Class-B network (65,536 hosts) requires about 1.75MB of memory for the list, and scanning a Class-A (16,777,216 hosts) requires about 448MB.

maybe you can ﬁrst check how big the network is before calling arpscan, if someone really has deﬁned a class A and that on a box with little RAM. Or stop with Class B then increase the bandwidth or something. /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » January 3rd, 2016, 7:23 pm Posts: 697 Joined: November 8th, 2015, 8:54 am So I have enough memory, 4GB and the machine has a Xenon processor, so I think there is enough room for improvement ...

Re: Who Is Online! for the IPFire 1 GaaD 0 by GaaD » January 12th, 2016, 10:01 pm Posts: 4th Joined: October 28th, 2014, 1:01 am Work nice: Thanks.

CODE: SELECT ALL

[root@ipfire wio]# ./wio.pl -d

HOSTNAME : ipfire.localdomain TIMEOUT : 01 Sekunde(n) MAILSTYLE : email RED TYPE : STATIC RED DEVICE : red0 RED ADDRESS : 10.0.0.2 SHUTDOWN : off

Suche im lokalen Netzwerk nach aktiven Hosts ...

ID IP-Adresse Ping DynDNS Status Mail Antwortzeit Antwort ------/

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » January 26th, 2016, 9:23 pm

Hello everyone, Posts: 53 Joined: October 12th, 2012, 1:15 pm the next ALPHA version of the WIO add-on for the IPFire for testing:

Download the package at http://www.h-loit.de/extern/ipﬁre/wio-1.0.32-1.ipﬁre.

Installation:

Copy the package to the IPFire, in the same directory the command

CODE: SELECT ALL

tar xvf wio-1.0.32-1.ipfire -C /opt/pakfire/tmp

To run. Then change to the directory / opt / pakﬁre / tmp and the command

CODE: SELECT ALL

export NAME=wio

To run. Then

CODE: SELECT ALL

./install.sh

To run.

Now the WIO add-on should be installed on the IPFire. It can be found under the menu item "Status".

The following has been ﬁxed:

- Collective mail now works - Mail function of the addon completely recreated - Superfluous error messages for error.log deactivated - Error in wio.pl fixed (if the red interface is not configured, WIO runs anyway) - FischerM's suggestions for English translation have been adopted - Typo corrected (Thanks FischerM!)

Greetings

sfeddersen /

- - 96 posts Post Reply & , 2 . ' 1 2 3 4th 5 ... 7th (

) Return to "development"

% Home ‹ index * Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=30 Page 1 of 2 Who Is Online! für den IPFire - Page 4 - forum.ipfire.org 1/13/21, 7:42 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

+ Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire - 96 posts Post Reply & , Search this topic ... ! " . ' 1 2 3 4th 5 6 7th (

Re: Who Is Online! for the IPFire 1 WhyTea Administrator 0 by WhyTea » February 2nd, 2016, 8:22 am

Moin Posts: 533 Joined: January 31st, 2011, 8:52 am Location: Dortmund I just installed the add-on and made the ﬁrst comment.

You can put a link under the IP by activating the HTTP ﬁeld. However, if the device does not have to be reached via http but via https, this will of course not work.

Greetings Daniel

If you like to support us, please contribute by donating.

My IPFire @ Home - always in stable-tree

Libvirt, Squid, Squidclamav, URL-Filter, OpenVPN, Samba, Cups, Transmission

My 2nd - always in testing-tree

Squid, Squidclamav, URL-Filter, Update-Accelerator, OpenVPN, WLAN-AP, Transmission /

Re: Who Is Online! for the IPFire 1 qiller 0 by qiller » February 28th, 2016, 4:39 pm Posts: 70 Joined: July 27th, 2014, 3:21 pm Short feedback for the last alpha version: Loift! - including collective mails. I could not ﬁnd any further errors in my environment. great work /

Re: Who Is Online! for the IPFire 1 0 by FischerM » February 28th, 2016, 7:03 pm

Framed,

FischerM Ups. Community Developer

After I was completely sweaty: no abnormalities were found here either. Posts: 1025 Joined: November 2nd, 2011, 12:28 pm Just works.

Greetings, Matthias /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » March 13th, 2016, 1:18 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello everyone, Location: NRW great work as I see it. I hope that I can use it to replace the script from user Werner, which I mentioned at the beginning. It is important to me that the IPFIRE shutdown after a certain time ~ 15-30 minutes when there is no longer any user in the network. I hope that can be done with it.

Note on the function: I currently have two IPFires in the same network and to the same Internet provider (upstream Fritzbox) My active IPFIRE assigns the IP, DNS and also the gateway to the clients via DHCP. Now I have installed V 1.0.32-1 on my backup / test ﬁrewall to test this add-on and have noticed the following: Two addresses are shown to me in the add-on, once the RED interface of the IPFIRE test and the second the client with which I access the IPFIRE test, so far so good. This client is displayed as "NO STATUS" under the "Status" line. Does that come now because the IPFIRE test is not the one that regulates the actual Internet tra!c or is the constellation with two systems here possibly not suitable for the function of the add-on? I installed the whole thing on a development build: next / 1775dbd2 Core 100 from March 10, 2016. Or are there still problems with the status of the clients?

Additions / improvements for the add-on: 1. In the setup there is the item shut down if no client is online anymore, an additional time should be set here so that, if you are the last one in the network, you can do it again shortly after switching o" the client Go online while IPFIRE is still active. So shutdown only in (no more client online + X min or so).

2. A timely check of when the IPFIRE will shutdown at all, in my opinion extremely important. This allows you to set when the IPFire should always be permanently online (even without an active client) and from when it goes into shutdown if no client is online anymore, e.g. as an example at night from 01:00 to 06:00 Test the presence of clients, the icing on the cake would be if this could be extended to weekdays. I think that makes the whole thing even better.

3. If it is important from my point of view that the shutdown behavior of the client is pending, this means that you need a tick for the client who is responsible for the shutdown being active. So which client should activate the shutdown process if this or a group of clients is / are no longer online.

Last edited by sammydk on March 16th, 2016, 9:56 am, edited 2 times in total.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » March 14th, 2016, 6:06 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm I use Alpha 1.0.32-1. Location: NRW Is there already a newer one, because apparently the function is OK with the others. Here is the message why my client status does not work: After executing: [root @ ipﬁre2 wio] # ./wio.pl -d

Search in the local network for active hosts ...

ID IP address Ping DynDNS status mail response time response ------1 192.168.177.10Can't call method "ping" on an undeﬁned value at ./wio. pl line 202.

Here is my test environment: PAE kernel addons: MC, NANO then VLAN for orenge and blue from the WIKI. Then nothing.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » March 22nd, 2016, 11:44 am Posts: 773 Joined: July 8th, 2012, 2:50 pm A humble question, is the addon discontinued or everyone on vacation? Location: NRW

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 0 by FischerM » March 25th, 2016, 9:13 am

Moin,

FischerM ... so I am NOT (yet) on vacation (* sigh *) - just assume a 'creative' break ... Community Developer

Happy Easter holidays! Posts: 1025 Joined: November 2nd, 2011, 12:28 pm Greetings, Matthias /

Re: Who Is Online! for the IPFire 1 twr1 0 by twr1 » September 12th, 2016, 12:51 pm Posts: 1 Joined: September 12th, 2016, 12:47 pm

1 Sammydk wrote: I use Alpha 1.0.32-1. Is there already a newer one, because apparently the function is OK with the others. Here is the message why my client status does not work: After executing: [root @ ipﬁre2 wio] # ./wio.pl -d

Search in the local network for active hosts ...

ID IP address Ping DynDNS status mail response time response ------1 192.168.177.10Can't call method "ping" on an undeﬁned value at ./wio. pl line 202.

Here is my test environment: PAE kernel addons: MC, NANO then VLAN for orenge and blue from the WIKI. Then nothing.

Hi,

unfortunately I have the same problem. Could someone help?

thanks /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » September 25th, 2016, 11:52 am Posts: 773 Joined: July 8th, 2012, 2:50 pm It's actually a shame that nothing happens here. Location: NRW

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » July 18th, 2017, 7:47 pm

Hello Posts: 53 Joined: October 12th, 2012, 1:15 pm everyone , I just pushed WIO 1.3.1 into the GIT!

I'm looking forward to your feedback!

http://git.ipﬁre.org/?p=people/sfedder ... /wio-1.3.1

Greetings

sfeddersen /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » July 19th, 2017, 1:45 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello sfeddersen, Location: NRW I lost the topic from the exercises because of the long interruptions and have now taken it up again. Unfortunately I have never installed anything from the GIT until now. The packed previous versions do not allow access (404). Can you possibly briefly describe how to get the WIO running from the Git? I downloaded the files from the Git and put them in the / opt / pakfire / tmp directory. What now? Thank you very much

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 0 by FischerM » July 19th, 2017, 5:04 pm

Hi,

FischerM GIT only contains the SOURCE texts - you need a development environment for that. Community Developer

If Stefan doesn't mind (?), I can build the current version in the next few days and put a download link for the manual Pakﬁre installation Posts: 1025 here. Or he himself has a corresponding package on hand (?). Joined: November 2nd, 2011, 12:28 pm

The (pre) version runs here without any noticeable problems - there have been a few minor changes since then.

Greetings, Matthias /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » July 19th, 2017, 6:01 pm

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm I am currently creating a new standalone package for testing.

As soon as this is done, I'll upload it here.

The latest changes are then also taken into account in the package.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » July 19th, 2017, 6:02 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello Matthias, Location: NRW thanks for the info. Then I'm curious.

UPs there the posts have overlapped, also big compliments to you Stephan.

Greetings Dietmar

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » July 22nd, 2017, 10:53 am

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm here is the link for a new package:

http://www.h-loit.de/ipﬁre/wio/wio-1.3 ... _21.ipﬁre

Unfortunately, I haven't had time to test the package yet and I need your feedback.

Greetings

Stephan /

- - 96 posts Post Reply & , 2 . ' 1 2 3 4th 5 6 7th (

) Return to "development"

% Home ‹ index * Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=45 Page 1 of 2 Who Is Online! for the IPFire - Page 5 - forum.ipfire.org 1/13/21, 7:43 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

+ Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire - 96 posts Post Reply & , Search this topic ... ! " . ' 1 ... 3 4th 5 6 7th (

Re: Who Is Online! for the IPFire 1 0 by Falconcrest » July 22nd, 2017, 12:10 pm

Hello Stephan, Falconcrest

1 sfeddersen wrote: ↑ July 22nd, 2017, 10:53 am Posts: 103 Joined: February 27th, 2013, 1:53 pm http://www.h-loit.de/ipﬁre/wio/wio-1.3 ... _21.ipﬁre

Unfortunately, I haven't had time to test the package yet and I need your feedback.

Installation worked, add-on is running. Since I don't see in detail what you've renewed, even more competent users should give their feedback.

Thank you for your work!

Greetings Carsten!

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » July 22nd, 2017, 3:16 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello Stephan, the Location: NRW installation went through without any problems. What I see so far corresponds exactly to my ideas. No abnormalities so far. Just great what came out of it. Great work.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » July 22nd, 2017, 3:44 pm

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm thanks for the ﬂowers.

However, thanks also go to Alexander (copymaster).

We both worked on WIO over and over again at our meetings.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » July 22nd, 2017, 4:02 pm Posts: 697 Joined: November 8th, 2015, 8:54 am So now you've made me want to take a look at the tool - I had it installed somehow before, but after reinstalling it probably went under.

Stupid question first: how do I install this .ipfire file? pakfire in the shell doesn't really want to.

I'm assuming that the installation is also for an x64 IPFire system, right?

Greetings, Michael

Re: Who Is Online! for the IPFire 1 0 by FischerM » July 22nd, 2017, 4:38 pm

Hi,

FischerM I did it here using a manual Pakﬁre installation: Community Developer

The Pakfire file from http://www.h-loit.de/ipfire/wio/wio-1.3 ... _21.ipfire'download. Posts: 1025 Joined: November 2nd, 2011, 12:28 pm Copy via 'winscp' or similar to '/ opt / pakfire / tmp' on the IPFire.

Unpack with 'tar xvf wio-1.3.1-1_build_2017_07_21.ipﬁre'.

Start 'install.sh', done.

Then enter the clients to be checked manually or from the ARP table or via import.

Click on 'Conﬁguration' at the bottom right, make the required settings.

Waiting.

After the set 'time interval (s) for the check' has elapsed, the corresponding graphs should appear on a separate page using the 'Show graphs' icon.

If I forgot something, please add ...

HTH, Matthias

EDIT: Almost forgot: runs ﬁne (32bit)! Thanks Stefan! /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » July 22nd, 2017, 5:36 pm

Hi, Posts: 53 Joined: October 12th, 2012, 1:15 pm thanks for the feedback so far.

If the package is "stable", I will create a short guide for it.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » July 22nd, 2017, 6:01 pm Posts: 697 Joined: November 8th, 2015, 8:54 am

1 FischerM wrote: ↑ July 22nd, 2017, 4:38 pm Unpack with 'tar xvf wio-1.3.1-1_build_2017_07_21.ipﬁre'. Start 'install.sh', done.

Oh, that's what I was missing: You still have to unpack the whole thing

Thank you, the installation worked perfectly! At the moment the addon is still scanning the green network.

Greetings, Michael

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » July 23rd, 2017, 7:59 am Posts: 697 Joined: November 8th, 2015, 8:54 am Somehow the add-on doesn't work as it should, at least not for me.

After installing I added clients from the DHCP entries and I have a lot: 64 pieces. My IP range: 192.168.0.0 with a mask of 255.255. 0.0 but that shouldn't matter in the end, because the addon only has to check the known 64 clients.

After adding from the DHCP settings (all static addresses), the add-on ﬁrst showed me all as inactive. Well, I thought, you wait until the next day, but I just get the same ad today.

Then I took one of the clients, to be precise the one I'm writing this post about, and pressed the update button on the left. After a long wait, I'm talking about several minutes, still no status that I would have expected.

Well, setting of this client changed from FQDN to IP and updated again. Here again only the message "Condition of the examining client (s) are updated .." and nothing else happens.

In other words: the display is not updated either manually or automatically based on the settings of the add-on. All clients are shown as inactive, although at least 10 of them are always active.

Is there another parameter that I could set and test? Despite the legal option, there is no indication of problems in the messages.

Greetings, Michael

Re: Who Is Online! for the IPFire 1 0 by FischerM » July 23rd, 2017, 8:31 am

Moin,

FischerM I had something like that (back then -> a long time ago ... ) too. Community Developer

Is there anything in the ﬁrewall logs (FORWARD, OUTGOING)? Posts: 1025 Joined: November 2nd, 2011, 12:28 pm Ev. do you block outgoing ICMP?

What kind of clients are they? Do they usually answer to a 'normal' PING?

You would have to release IMHO at least ICMP ECHO (7) according to GREEN.

At that time, both FORWARD and OUTGOING were blocked for me. So that WIO could work, I had to reinsert releases for FORWARD (ICMP) and OUTGOING (ICMP / ECHO (7)) according to GREEN.

HTH, Matthias /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » July 23rd, 2017, 12:42 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello Location: NRW everyone, I would also see it that way, I have no outgoing rules on both of my systems and the add-on works great. (Addition), I thought up to now. I also have some IPs in the green network that are reported as inactive, although they can be reached online and via ping. E.g. my Philips TV is always inactive, even after activating / sync several times, no chance to activate.

[root @ ipﬁre1 ~] # ping 192.168.177.70 PING 192.168.177.70 (192.168.177.70) 56 (84) bytes of data. 64 bytes from 192.168.177.70: icmp_seq = 1 ttl = 64 time = 2.17 ms 64 bytes from 192.168.177.70: icmp_seq = 2 ttl = 64 time = 0.213 ms 64 bytes from 192.168.177.70: icmp_seq = 3 ttl = 64 time = 0.206 ms 64 bytes from 192.168.177.70: icmp_seq = 4 ttl = 64 time = 0.264 ms 64 bytes from 192.168.177.70: icmp_seq = 5 ttl = 64 time = 0.255 ms 64 bytes from 192.168.177.70: icmp_seq = 6 ttl = 64 time = 0.209 ms

Who Is Online_.jpg (07/10 KiB) Viewed 3523 times Here is an addendum: a while after all the attempts, the Philips TV is also displayed online. Perhaps you just have to be patient, but is that right, if you synced the IP, the result should be available at short notice. How long it took now I can't say, but it took at least several minutes until I had no idea.

In addition, I have a question of understanding: The names in the WIO of the clients from the ARP cache correspond to the names of the DHCP server conﬁguration, which are there under comments. The names in the WIO AddOn adopted correspond to the host names / FQDN from the host ﬁle.

Is that what you want, or am I getting something wrong or is it a mistake?

Example: A PC is named in the DHCP config under the note PC-Philipp-INTEL.kalli.local, then also the excerpt in the WOI from the ARP cache, in the WOI config then the name from the host file philipp.kalli.local It is one and the same PC.

Greetings Dietmar

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » July 24th, 2017, 3:55 pm Posts: 697 Joined: November 8th, 2015, 8:54 am

1 FischerM wrote: ↑ July 23rd, 2017, 8:31 am What kind of clients are they? Do they usually answer to a 'normal' PING?

You would have to release IMHO at least ICMP ECHO (7) according to GREEN.

At that time, both FORWARD and OUTGOING were blocked for me. So that WIO could work, I had to reinsert releases for FORWARD (ICMP) and OUTGOING (ICMP / ECHO (7)) according to GREEN.

So I basically set FORWARDING to Blocked and selectively enabled the Windows clients with the appropriate rules.

Including the following rules:

Nothing is written to the ﬁrewall log only when a single client is updated on the WhoIsOnline page as a test.

So good advice is expensive ^^ Michael

Re: Who Is Online! for the IPFire 1 0 by FischerM » July 24th, 2017, 6:15 pm

Hi,

FischerM I can only describe how things are going here without any problems: Community Developer

FORWARD: Blocked , OUTGOING: Allowed . Posts: 1025 Joined: November 2nd, 2011, 12:28 pm ICMP allowed in FORWARDING for all (all / all).

And if in the "paranoid" setting (both FORWARD and OUTGOING => blocked , it was a while ago) WIO didn't get through, I could see it in the logs immediately. So I'm a little surprised that you don't see anything in the FW logs.

HTH, Matthias /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » July 31st, 2017, 3:54 pm Posts: 697 Joined: November 8th, 2015, 8:54 am Hi,

what option (s) do I have to uninstall the add-on?

I found an uninstall.sh in the directory, but either it doesn't belong to WIO or it doesn't matter because:

1 [root @ ipfire tmp] # ./uninstall.sh Creating Backup ...... Finished. Removing files ... cat: / opt / pakfire / db / rootfiles /: Is a directory ... Finished. [root @ ipfire tmp] #

Edit: the page cannot be called after uninstall.sh, but the menu entry remains ...

Can someone please give me a small wink with the fence post?

Greetings, Michael

Re: Who Is Online! for the IPFire 1 0 by FischerM » August 1st, 2017, 4:37 pm

Ahmt,

FischerM the ﬁle 'EX-wio.menu' in '/var/ipﬁre/menu.d/' is responsible for the WIO menu entry. Community Developer

Delete and the menu entry is gone ... Posts: 1025 Joined: November 2nd, 2011, 12:28 pm HTH, Matthias /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » August 1st, 2017, 6:40 pm Posts: 697 Joined: November 8th, 2015, 8:54 am Thanks!

- - 96 posts Post Reply & , 2 . ' 1 ... 3 4th 5 6 7th (

) Return to "development"

% Home ‹ index * Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=60 Page 1 of 2 Who Is Online! for the IPFire - Page 6 - forum.ipfire.org 1/13/21, 7:44 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

+ Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire - 96 posts Post Reply & , Search this topic ... ! " . ' 1 ... 3 4th 5 6 7th (

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » August 2nd, 2017, 4:30 pm

Hello FischerM and Hellﬁre, Posts: 53 Joined: October 12th, 2012, 1:15 pm which IPFire version do you use?

x86_64-full-core111 or i586-full-core111?

I think that has something to do with Hellﬁre's problem.

I would be happy to receive information on this.

Thanks.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » August 2nd, 2017, 4:56 pm Posts: 697 Joined: November 8th, 2015, 8:54 am Servus,

64bit, Core 111 on an ESXi 6.5 host, i.e. virtualized, see also my Sig.

Regards, Michael

Re: Who Is Online! for the IPFire 1 0 by FischerM » August 2nd, 2017, 5:31 pm

Mimics,

FischerM 32bit, Core 111, on one Duo box. Community Developer

Greetings, Posts: 1025 Matthias Joined: November 2nd, 2011, 12:28 pm /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » August 3rd, 2017, 6:18 pm

Hello, Posts: 53 Joined: October 12th, 2012, 1:15 pm thanks for the info.

I created the addon package wio-1.3.1-1_build_2017_07_21 in an IPFire build environment i586.

Therefore it will probably not work on an IPFire 64Bit.

I did it again on a 64Bit IPFire:

The main reason is the ﬁle "wioscan" in / usr / local / bin, which causes an error when running.

-bash: / usr / local / bin / wioscan: No such ﬁle or directory

If I then execute "wio.pl" in / var / ipﬁre / wio, I get this error message:

Can't call method "ping" on undeﬁned value at ./wio.pl line 203.

Since wioscan is not executed, the arpcache is not ﬁlled in the wio.pl and thus the call of the wio.pl fails.

An insert of

CODE: SELECT ALL

push (@arpclients, "127.0.0.1");

in line 163 of the wio.pl "ﬁxes" the problem.

But it's just a "quick and dirty" workaround.

Browsing the networks is also a!ected, as wioscan is also used there.

I have to take another closer look at that.

Thank you very much for your patience.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 Hellfire 0 by Hellfire » August 3rd, 2017, 6:42 pm Posts: 697 Joined: November 8th, 2015, 8:54 am Thank you for your feedback signal!

Take your time with your investigations, there is already an initial approach and if it works in the end it can take a little longer.

Greetings, Michael

Re: Who Is Online! for the IPFire 1 MenoK 0 by MenoK » August 9th, 2017, 5:00 pm Posts: 2 Joined: August 9th, 2017, 3:28 pm Neither the wioscan nor the wiohelper run under x64. They expect an ld-linux.so.2 under / lib, which is not available there. Unfortunately, a symlink to the target of @ ld-linux-64.so.2 under the desired name does not solve the problem, because wioscan and wiohelper then complain that the library is defective (which is somehow true from a 32-bit application point of view ). /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » August 9th, 2017, 6:24 pm

Yes, I've already found that out. Posts: 53 Joined: October 12th, 2012, 1:15 pm I have already created a package for x64 systems of the addon, which is going on so far. However, there are a few other minor issues with an x64 system that need to be addressed.

As soon as I get that under control, there will be new packages for testing.

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by Arne.F » August 21st, 2017, 8:37 am

Hello Stephan, Arne, F. Core Developer

I installed WIO from the testing tree on an arm (bananapi) system. It works great, except for the drop-down boxes for the "ping" Posts: 8522 timeout and the VPN scan times, which are always set to "1" when the conﬁg page is called up. Joined: May 7th, 2006, 8:57 am Location: BS <-> NDH Arne Contact: 2

Arne

Support the project on the donation!

PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses. /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » August 21st, 2017, 2:58 pm

Hello Arne, Posts: 53 Joined: October 12th, 2012, 1:15 pm thanks for the feedback.

Could you please test the values from 10 in the drop down boxes?

I think the values less than 10 are the problem, they are not taken over correctly. Everything greater than 10 works.

Thanks!

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by Arne.F » August 23rd, 2017, 6:16 pm

Yes, I can conﬁrm that, values over 10 are saved correctly. Arne, F. Core Developer

Posts: 8522 Arne Joined: May 7th, 2006, 8:57 am Location: BS <-> NDH Support the project on the donation! Contact: 2

PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses. /

Re: Who Is Online! for the IPFire 1 0 by FischerM » August 23rd, 2017, 7:26 pm

Ahm,

FischerM conﬁrmation from me too ... Community Developer

Greetings, Posts: 1025 Matthias Joined: November 2nd, 2011, 12:28 pm /

Re: Who Is Online! for the IPFire 1 0 by Roberto Peña » August 25th, 2017, 5:54 pm

Hi to all.

Sorry to write in English, but I do not know anything about German.

I've tried the new WIO addon and it looks spectacular. I have a suggestion: Roberto Peña Why not, because it is capable of detecting computers in the networks, objects are automatically created at Firewall level in "Firewall" - Posts: 761 Joined: July 16th, 2014, 3:56 pm > "Firewall Groups" -> "Host", in "Networks" and in "Network / Host group "? Location: Bilbao (España) Contact: 2 Thus it would not be necessary to create them manually and would unify criteria of naming of the objects and would be more coherent.

It's an idea.

Greetings and thank you very much.

╔════════════════════════════════════════════════╗ ║ Donate to improve IPFire:https://www.ipfire.org/donate║ ╚════════════════════════════════════════════════ ╝ /

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » August 27th, 2017, 12:53 pm

Hello Matthias and Arne.F, Posts: 53 Joined: October 12th, 2012, 1:15 pm Thanks for the feedback.

Today I created the patches for wio.cgi, wiographs.cgi, install.sh and lfs / wio and uploaded them to the patchwork.

I hope this will solve the problems reported by you and Hellﬁre.

Please give us your feedback again.

Many Thanks!

Greetings

Stephan /

Re: Who Is Online! for the IPFire 1 0 by FischerM » August 27th, 2017, 3:27 pm

HI,

FischerM looks good - 'ping' timeout and 'VPN' scan times are displayed correctly. I still have to test the deinstallation. The ﬁle rights look better Community Developer now. Posts: 1025 Greetings + thanks! Joined: November 2nd, 2011, 12:28 pm Matthias /

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » September 7th, 2017, 9:41 am Posts: 773 Joined: July 8th, 2012, 2:50 pm Hello, Location: NRW I reinstalled WOI from Pakﬁre under Core 113 (1.3.1-3) I notice that there is still an inconsistency, at least for me. If I take a not yet monitored IP from the ARP table and insert it, the following problem arises. Before I insert it, I tick the box for sending mail for "online" and then save "o#ine". I don't get "No status available" for this IP even after synchronizing. If I insert the IP without ticking the "online" and "o#ine" checkboxes, the status is immediately "active". That is reproducible. If I check the box for sending mails "online" and "o#ine", everything is OK and the status remains "active". Is there still something wrong?

Last edited by sammydk on September 7th, 2017, 9:44 am, edited 2 times in total.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

- - 96 posts Post Reply & , 3 . ' 1 ... 3 4th 5 6 7th (

) Return to "development"

% Home ‹ index * Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=75 Page 1 of 2 Who Is Online! für den IPFire - Page 7 - forum.ipfire.org 1/13/21, 7:45 PM

forum.ipfire.org The old IPFire Forum Archive Search ... ! "

* Quick links # FAQ $ Log in

% Home ‹ index ‹ German Area | German-speaking area ‹ development

Who Is Online! for the IPFire , 96 posts Post Reply & + Search this topic ... ! " - ' 1 ... 3 4th 5 6 7th

Re: Who Is Online! for the IPFire 1 0 by Arne.F » September 8th, 2017, 10:59 am Arne, F. When updating to -3 the old counts were deleted. Either he does not backup / restore during the update or an important ﬁle is missing Core Developer in the backup include. (haven't looked closely yet)

Posts: 8522 Arne Joined: May 7th, 2006, 8:57 am Location: BS <-> NDH Contact: / Support the project on the donation!

PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses. .

Re: Who Is Online! for the IPFire 1 sammydk 0 by sammydk » September 8th, 2017, 12:54 pm Posts: 773 Joined: July 8th, 2012, 2:50 pm Sorry, I have to improve, after an endless time, the IP with the mail will also go ONLINE. Location: NRW The behavior is therefore correct, but it takes a long time if you set up the monitoring directly with mail dispatch. First set up the route and then set the mail parameters the second time, then you can work around it. So it seems to be OK after all.

Greetings Dietmar @ HOME 338 MBit Down / 21 MBit Up by UM IPv4 ;-)

Test system

Re: Who Is Online! for the IPFire 1 sfeddersen Community Developer 0 by sfeddersen » September 9th, 2017, 3:37 pm

Thanks for the feedback and information. Posts: 53 Joined: October 12th, 2012, 1:15 pm I will have a look.

The rrd data are not saved during an update. For this reason, new graphs are created after an update. But I will correct it and include it in the backup.

Greetings

Stephan .

Re: Who Is Online! for the IPFire 1 rossi185 0 by rossi185 » August 29th, 2018, 2:15 pm Posts: 31 Joined: February 3rd, 2014, 10:25 pm Servus,

in the current version of Who is online in "IPFire 2.21 (i586) - Core Update 122" , I tried to enter the web interface of our mail server, since HTTP and HTTPS can also be conﬁgured. Since the web service crashes every now and then, I would like to monitor it - not just check whether the machine reacts to ICMP.

Unfortunately it only shows "inactive".

Note: The web server is located in a di!erent network, which can be reached via IP-Sec through the IPFire. The following ﬁrewall rules apply on both sides: Network A ==> Network B everything is allowed Network B ==> Network A everything is allowed

Thank you for pointers .

Re: Who Is Online! for the IPFire 1 0 by Arne.F » August 30th, 2018, 7:24 am

As far as I know, Who Is Online can only monitor via ping. Arne, F. Core Developer

The possibility of specifying a web interface (http / s) is just a convenience function so that you can log into the machines more quickly Posts: 8522 with a click. Joined: May 7th, 2006, 8:57 am Location: BS <-> NDH Contact: / Arne

Support the project on the donation!

PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses. .

Re: Who Is Online! for the IPFire 1 rossi185 0 by rossi185 » January 1st, 2019, 1:24 pm Posts: 31 Joined: February 3rd, 2014, 10:25 pm Thanks and sorry for the late reply

, , 96 posts Post Reply & + 2 - ' 1 ... 3 4th 5 6 7th

( Return to "development"

% Home ‹ index ) Delete cookies All times are UTC

https://ieffsod6hqgyb4rmcrnjccqyky--forum-ipfire-org.translate.goog/viewtopic.php?f=17&t=11677&sid=fc08edd83e35ed0ed8599b1771fa4cbe&start=90 Page 1 of 2