DOCSLIB.ORG

Code Description

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Code Description Code Description 5 ABRASIVES 005-05 ABRASIVE EQUIPMENT AND TOOLS 005-14 ABRASIVES, COATED: CLOTH, FIBER, SANDPAPER, ETC. 005-21 ABRASIVES, SANDBLASTING, METAL 005-28 ABRASIVES, SANDBLASTING (OTHER THAN METAL) 005-42 ABRASIVES, SOLID: WHEELS, STONES, ETC. 005-56 ABRASIVES, TUMBLING (WHEEL) GRINDING AND POLISHING COMPOUNDS: CARBORUNDUM, DIAMOND, ETC. (FOR 005-63 VALVE GRINDING COMPOUNDS SEE CLASS 075) 005-70 PUMICE STONE 005-75 RECYCLED ABRASIVES PRODUCTS AND SUPPLIES 005-84 STEEL WOOL, ALUMINUM WOOL, COPPER WOOL, AND LEAD WOOL 10 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 010-05 ACOUSTICAL TILE, ALL TYPES (INCLUDING RECYCLED TYPES) ACOUSTICAL TILE ACCESSORIES: CHANNELS, GRIDS, MOUNTING HARDWARE, RODS, 010-08 RUNNERS, SUSPENSION BRACKETS, TEES, WALL ANGLES, AND WIRES 010-09 ACOUSTICAL TILE INSULATION 010-11 ADHESIVES AND CEMENTS, ACOUSTICAL TILE 010-14 ADHESIVES AND CEMENTS, INSULATION 010-17 ALUMINUM FOIL, ETC. 010-30 BANDS, CLIPS, AND WIRES (FOR PIPE INSULATION) 010-38 CLIPS, PINS, ETC. (FOR DUCT INSULATION) 010-41 CORK: BLOCKS, BOARDS, SHEETS, ETC. 010-45 EXTERIOR INSULATION AND FINISH SYSTEMS 010-53 FIBERGLASS: BATTS, BLANKETS AND ROLLS 010-56 FOAM GLASS: BLOCKS, SHEETS, ETC. 010-57 FOAM-IN-PLACE INSULATION: PHENOLIC, URETHANE, ETC. 010-59 FOAM PLASTICS: BLOCKS, BOARDS, SHEETS, ETC. 010-62 INSULATION, INTERIOR 010-63 INSULATION, BLOWN TYPE 010-64 INSULATION, LOOSE FILL 010-65 JACKETING (FOR INSULATION): CANVAS, OSNABURG, ETC. 010-70 MAGNESIA: BLOCKS, SHEETS, ETC. 010-72 MINERAL WOOL: BLANKETS, BLOCKS, BOARDS 010-75 PAINTS, PRIMERS, SEALERS, ETC. (FOR INSULATION) 010-76 PAPER TYPE INSULATION MATERIAL (CELLULOSE, ETC.) 010-78 PIPE AND TUBING INSULATION, ALL TYPES 010-81 PREFORMED INSULATION, ALL TYPES (FOR ELLS, TEES, VALVES, ETC.) 010-83 RECYCLED INSULATION MATERIALS AND SUPPLIES, ALL TYPES 010-84 RUBBER INSULATION ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: 15 CHEMICALS, INKS, PAPER, ETC. 015-06 ADDRESSING MACHINE SUPPLIES, METAL AND PLASTIC PLATE TYPE 015-10 ADDRESSING MACHINE SUPPLIES, PAPER PLATE TYPE 015-15 CHEMICALS AND SUPPLIES, DRY (FOR BOND PAPER TYPE COPYING MACHINES) 015-16 CHEMICALS AND SUPPLIES, WET (FOR BOND PAPER TYPE COPYING MACHINES) 015-20 CHEMICALS AND SUPPLIES (FOR SPIRIT TYPE DUPLICATING MACHINES) 015-25 CHEMICALS, INKS, AND SUPPLIES (FOR MIMEOGRAPH MACHINES) 015-38 PAPER, CHEMICALS, AND SUPPLIES (FOR BLUELINE MACHINES) PAPER, CHEMICALS, AND SUPPLIES (FOR COATED OR TREATED PAPER TYPE 015-39 COPYING MACHINES) (SEE 305-39 FOR DIAZO PROCESS COPY MACHINES) PAPER, CHEMICALS, AND SUPPLIES (FOR DIFFUSION TRANSFER TYPE COPYING 015-45 MACHINES) (SEE 305-39 FOR DIAZO PROCESS COPY MACHINES) PAPER AND SUPPLIES (FOR DUAL SPECTRUM PROCESS COPYING MACHINES) (SEE 015-55 305-39 FOR DIAZO PROCESS COPY MACHINES) PAPER, CHEMICALS, AND SUPPLIES (FOR THERMAL PROCESS COPYING MACHINES) 015-70 (SEE 305-39 FOR DIAZO PROCESS COPY MACHINES) 015-77 RECYCLED COPYING AND DUPLICATING SUPPLIES AGRICULTURAL CROPS AND GRAINS INCLUDING FRUITS, MELONS, NUTS, AND 19 VEGETABLES 019-20 BARLEY 019-21 BERRY CROPS 019-24 BUCKWHEAT 019-30 CORN 019-32 COTTON 019-41 FRUITS, CITRUS 019-42 FRUITS, DECIDUOUS TREE 019-47 GRAPES 019-50 HOPS 019-53 MELONS 019-54 MILLET 019-56 NUTS, TREE 019-58 OATS 019-60 POTATOES, IRISH 019-62 PUMPKINS 019-66 RICE 019-67 RYE 019-72 SORGHUM 019-73 SOYBEANS 019-78 SUGARCANE AND SUGARBEETS 019-85 TOBACCO 019-90 VEGETABLES 019-94 WHEAT AGRICULTURAL EQUIPMENT, IMPLEMENTS, AND ACCESSORIES (SEE CLASS 022 FOR 20 PARTS) 020-02 BACKHOE (FOR FARM TRACTOR) 020-04 BRUSH AND TREE CHIPPERS 020-06 BRUSH CUTTERS AND SAWS, MOTOR DRIVEN 020-10 COUNTERS, ACRE CULTIVATING EQUIPMENT, FARM: GO-DEVILS, ROW TYPE SHOVEL CULTIVATORS, 020-13 TOOTH AND SPRING HARROWS, ETC. 020-14 CURB EDGER, HEAVY DUTY, TRACTOR MOUNTED CUTTERS AND SHREDDERS (MOWERS), HEAVY DUTY, FLAIL: TOW TYPE AND/OR 020-15 CENTER MOUNT TYPE CUTTERS AND SHREDDERS (MOWERS), HEAVY DUTY, REEL AND ROTARY: TOW TYPE 020-16 AND/OR CENTER MOUNT TYPE 020-18 DOZER BLADES (FOR FARM TRACTORS) 020-20 DRYING EQUIPMENT, GRAIN 020-23 ENSILAGE CUTTERS 020-25 FARM WAGONS 020-27 FEED MILLS AND MIXERS 020-28 FEED WAGONS 020-30 FERTILIZER APPLICATORS AND FITTINGS, LIQUID AND GAS FERTILIZER DISTRIBUTORS, DRY, COMMERCIAL (SEE CLASS 515 FOR LAWN TYPE 020-31 DISTRIBUTORS) 020-33 GARDEN TRACTORS, CULTIVATORS, AND PLOWS 020-34 GANG MOWERS, REEL TYPE, TOWED 020-35 GRAIN BINS AND TANKS 020-36 GRADING MACHINES FOR SEEDS, GRAINS AND DRIED VEGETABLES 020-37 GRASS SEED STRIPPERS AND CLEANERS 020-39 GRASS SPRIGGERS AND SEEDERS 020-40 GRINDING MILLS: SEED, GRAIN, DRIED VEGETABLE HARVESTING EQUIPMENT: BEAN, CORN, AND PEA PICKERS AND SHELLERS, 020-41 COMBINES, COTTON AND FRUIT PICKERS, HEADERS, SLED CUTTERS AND THRESHERS 020-43 HAYING EQUIPMENT: BALERS, DRYERS, ELEVATORS AND RAKES, ETC. 020-46 HERBICIDE, INSECTICIDE AND FUNGICIDE APPLICATORS AND DISTRIBUTORS 020-49 IRRIGATION EQUIPMENT AND SUPPLIES, AGRICULTURAL 020-59 LAND LEVELERS 020-61 LOADERS, TRACTOR MOUNTED, FARM 020-62 LOG SPLITTERS 020-63 MANURE SPREADERS 020-64 MOWER, ARTICULATED BOOM: FLAIL, ROTARY, OR SICKLE HEAD MOWER (STEEP SLOPE TYPE WITH CUTTER HEAD ON TELESCOPING BOOM): FLAIL, 020-65 ROTARY, OR SICKLE BAR CUTTER HEADS, FOR MOUNTING ON TRACTORS OR TRUCKS (SEE CLASS 515 FOR LAWN TYPE MOWERS) MOWER, TRACTOR MOUNTED (STEEP SLOPE TYPE WITH CUTTER HEAD ON 020-66 TELESCOPING BOOM): FLAIL, ROTARY, OR SICKLE BAR CUTTER HEADS (SEE CLASS 515 FOR LAWN TYPE MOWERS) MOWER-TRACTOR UNIT OR SELF-PROPELLED MOWER, FOR SLOPE MOWING (SEE 020-67 CLASS 515 FOR LAWN TYPE MOWERS) MOWER, CENTER MOUNTED; AND TRACTOR (SEE CLASS 515 FOR LAWN TYPE 020-68 MOWERS) 020-69 PASTURE RENOVATORS 020-71 PLANTING EQUIPMENT, BROADCASTING 020-72 PLANTING EQUIPMENT, DRILLING 020-73 PLANTING EQUIPMENT, ROW CROP 020-74 PROCESSING MACHINERY AND EQUIPMENT, AGRICULTURAL 020-75 POSTHOLE DIGGERS, TRACTOR MOUNTED 020-76 PROTECTION STRUCTURES, ROLLOVER (ROPS) 020-77 PULVERIZERS AND ROTARY TILLERS, SOIL 020-78 RECYCLED AGRICULTURAL EQUIPMENT ACCESSORIES AND SUPPLIES 020-79 ROCK PICKERS AND RAKES 020-81 RODENT CONTROL EQUIPMENT, TRACTOR OPERATED SPADE, TREE (TRUCK OR TRAILER MOUNTED, OR THREE-POINT HOOK-UP FOR 020-82 TRACTOR MOUNTING) AND OTHER TREE TRANSPLANTING AND DIGGERS 020-83 SWEEPS AND OTHER STEEL SHAPES 020-84 SOIL MIXERS AND SAMPLERS 020-85 TERRACING EQUIPMENT TILLAGE EQUIPMENT, HEAVY DUTY, FARM: BLADE PLOWS, DISC HARROWS, LISTERS, 020-87 ROTARY HOES, TOOL BARS, ETC. 020-89 TRACTORS, FARM, WHEEL TYPE 020-90 TREE AND ROOT CUTTERS AND STUMP GRINDERS, TRACTOR MOUNTED 020-91 TREE GIRDLERS AND TIMBER TONGS 020-93 UMBRELLAS, TRACTOR 020-95 UNLOADERS AND ELEVATORS, GRAIN 020-96 WEDGES, STEEL, TREE FELLING AND SPLITTING 22 AGRICULTURAL EQUIPMENT AND IMPLEMENT PARTS 022-04 BRUSH CHIPPER, CUTTER AND SAW PARTS 022-13 CULTIVATING EQUIPMENT PARTS 022-15 CUTTER AND SHREDDER (MOWER), FLAIL, ROTARY, REEL, AND SICKLE BAR PARTS 022-30 FERTILIZER DISTRIBUTOR PARTS 022-41 HARVESTING EQUIPMENT PARTS 022-42 HAYING EQUIPMENT PARTS 022-43 HERBICIDE, INSECTICIDE AND FUNGICIDE APPLICATOR AND DISTRIBUTOR PARTS 022-49 IMPLEMENT PARTS FOR JOHN DEERE 022-51 IMPLEMENT PARTS FOR FORD 022-53 IMPLEMENT PARTS FOR INTERNATIONAL HARVESTER 022-58 IMPLEMENT PARTS FOR OTHER FARM EQUIPMENT 022-62 IRRIGATION SYSTEM PARTS, AGRICULTURAL 022-70 PLANTING EQUIPMENT PARTS 022-73 POSTHOLE DIGGER (TRACTOR MOUNTED) PARTS 022-74 RECYCLED AGRICULTURAL AND IMPLEMENT PARTS 022-75 SPRIGGER AND SEEDER PARTS, GRASS 022-77 TILLAGE EQUIPMENT PARTS 022-80 TRACTOR (FARM AND GARDEN) PARTS 022-82 TREE SPADE AND FORESTRY EQUIPMENT PARTS 022-95 UNLOADER AND ELEVATOR (GRAIN) EQUIPMENT PARTS 022-97 WAGON PARTS 25 AIR COMPRESSORS AND ACCESSORIES 025-10 COMPRESSOR, BARE UNIT (NOT MOUNTED OR POWERED), 15 HP AND LESS 025-20 COMPRESSOR, BARE UNIT (NOT MOUNTED OR POWERED), OVER 15 HP COMPRESSOR, BASE OR TANK MOUNTED, ELECTRIC MOTOR OR ENGINE DRIVEN, 15 025-30 HP AND LESS; AND PARTS COMPRESSOR, BASE OR TANK MOUNTED, ELECTRIC MOTOR OR ENGINE DRIVEN, 025-40 OVER 15 HP; AND PARTS 025-43 COMPRESSOR, HIGH PRESSURE, ALL SIZES AND MODELS COMPRESSOR, PORTABLE, ELECTRIC MOTOR OR ENGINE DRIVEN, 5 HP AND LESS; 025-45 AND PARTS COMPRESSOR, PORTABLE, ELECTRIC MOTOR OR ENGINE DRIVEN, OVER 25 CFM AT 025-50 100 PSI; AND PARTS 025-55 DRYERS, DESICCANT AIR 025-60 FILTERS, AIR GAUGES AND VALVES, PRESSURE REGULATORS, SHOCK MOUNTS, ETC. 025-70 MOISTURE SEPARATORS, NON-REFRIGERATED 025-80 MOISTURE SEPARATORS, REFRIGERATED 025-85 MOTORS, AIR COMPRESSOR 025-90 RECYCLED AIR COMPRESSOR ACCESSORIES AND SUPPLIES AIR CONDITIONING, HEATING, AND VENTILATING EQUIPMENT, PARTS AND 31 ACCESSORIES (SEE CLASS 740 ALSO) AIR CONDITIONING UNITS, PORTABLE (FOR COMPUTER ROOMS, HOSPITAL ROOMS, 031-02 SPORTING EVENTS, ETC.) AIR CONDITIONERS: COMMERCIAL, AND PARTS AND ACCESSORIES NOT INDIVIDUALLY 031-03 ITEMIZED AIR CONDITIONERS: CONTROLLED ENVIRONMENT (FOR COMPUTER ROOMS, ETC.), 031-04 AND PARTS AND ACCESSORIES NOT INDIVIDUALLY ITEMIZED) AIR CONDITIONERS (COOLING AND COOLING/HEATING TYPES): WINDOW AND WALL 031-05 MOUNTED, AND PARTS AND ACCESSORIES NOT INDIVIDUALLY ITEMIZED AIR CONDITIONING AND HEATING: CENTRAL UNITS, AND PARTS AND ACCESSORIES 031-06 NOT INDIVIDUALLY ITEMIZED 031-07 AIR CIRCULATION EQUIPMENT (NOT OTHERWISE CLASSIFIED) 031-08 AIR CURTAINS 031-09 AIR FLOW METERS 031-10 AIR PURIFIERS, ACCESSORIES AND SUPPLIES 031-11 BLOWERS: INDUSTRIAL TYPES 031-13 CHILLERS, HEAT EXCHANGERS AND RECEIVERS 031-14 CHILLED WATER SYSTEM, PORTABLE 031-15 CHILLED WATER METER SYSTEM 031-16 COATINGS AND SEALANTS, DUCT 031-17 COILS: CHILLED OR HEATED WATER, AND DIRECT EXPANSION 031-18 COIL AND FAN UNITS, AIR CONDITIONING 031-20 COMPRESSORS, AIR CONDITIONING: HERMETICALLY SEALED, WINDOW UNIT TYPE 031-21 COMPRESSORS, AIR CONDITIONING: INDUSTRIAL TYPE, AND PARTS 031-23 CONDENSING UNITS (FOR AIR CONDITIONERS) CONTROLS, COOLING TOWER WATER TREATMENT: PH, CONDUCTIVITY, CORROSION 031-24 SENSORS 031-25 CONTROLS: LIMIT SWITCHES, RELAYS, THERMOSTATS, GAS VALVES, ETC. 031-26 CONTROL SYSTEMS: COMPLETE (FOR AUTOMATIC TEMPERATURE CONTROL) COOLING TOWER WATER TREATMENT: NON-CHEMICAL OZONE, CENTRIFUGAL 031-27 SEPARATORS, MAGNETIC DESCALING EQUIP. (SEE CLASS 885 FOR CHEMICAL TYPES) 031-28 COOLING TOWERS: FORCED AIR, GRAVITY, ETC.
Load more

Recommended publications
  • Annual Report Norske Skog
    09 ANNUAL REPORT NORSKE SKOG BOD report Sustainability 22 and accounts 96 report KEY FINANCIAL FIGURES DEFINITIONS 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 Income statement (NOK million) Operating revenue 20 362 26 468 27 118 28 812 25 726 25 302 24 068 23 471 30 354 26 635 Gross operating earnings 1 2 185 2 723 3 932 4 704 3 957 4 353 4 686 5 198 8 419 6 599 Operating earnings (1 325) (1 407) 677 (2 527) 630 757 1 536 1 306 5 096 4 211 Earnings before financial expenses 2 (1 209) (1 242) 785 (2 275) (51) 868 1 383 1 833 5 581 4 575 Profit/loss before income taxes (1 019) (2 779) 235 (3 480) (1 004) 210 770 806 3 894 3 021 Net profit/loss for the year (1 400) (2 765) (683) (3 017) (848) 629 406 1 168 2 660 2 184 Balance sheet (NOK million) Non-current assets 23 546 26 980 29 307 37 577 43 740 36 861 39 219 38 197 45 417 43 717 Current assets 9 609 18 211 13 953 7 653 8 293 7 238 7 119 6 769 10 855 17 510 Total assets 33 155 45 191 43 260 45 230 52 033 44 099 46 338 44 966 56 272 61 227 Total equity 12 015 13 632 15 957 18 550 22 679 18 894 19 416 17 921 19 526 22 351 Non-current liabilities 17 316 23 277 21 533 18 802 21 700 20 052 21 402 18 814 30 858 31 906 Current liabilities 3 824 8 282 5 770 7 878 7 654 5 153 5 520 6 210 5 888 6 970 Total equity and liabilities 33 155 45 191 43 260 45 230 52 033 44 099 46 338 42 945 56 272 61 227 Net interest-bearing debt 9 595 14 047 16 408 17 320 19 063 16 871 17 759 18 204 22 820 20 535 Profitability Gross operating margin % 3 10.73 10.30 14.50 16.30 15.40 17.20 19.50 22.10 27.70 24.80
    [Show full text]
  • Kemble Z3 Ephemera Collection
    http://oac.cdlib.org/findaid/ark:/13030/c818377r No online items Kemble Ephemera Collection Z3 Finding aid prepared by Jaime Henderson California Historical Society 678 Mission Street San Francisco, CA, 94105-4014 (415) 357-1848 [email protected] 2013 Kemble Ephemera Collection Z3 Kemble Z3 1 Title: Kemble Z3 Ephemera Collection Date (inclusive): 1802-2013 Date (bulk): 1900-1970 Collection Identifier: Kemble Z3 Extent: 185 boxes, 19 oversize boxes, 4 oversize folder (137 linear feet) Repository: California Historical Society 678 Mission Street San Francisco, CA 94105 415-357-1848 [email protected] URL: http://www.californiahistoricalsociety.org Location of Materials: Collection is stored onsite. Language of Materials: Collection materials are primarily in English. Abstract: The collection comprises a wide variety of ephemera pertaining to printing practice, culture, and history in the Western Hemisphere. Dating from 1802 to 2013, the collection includes ephemera created by or relating to booksellers, printers, lithographers, stationers, engravers, publishers, type designers, book designers, bookbinders, artists, illustrators, typographers, librarians, newspaper editors, and book collectors; bookselling and bookstores, including new, used, rare and antiquarian books; printing, printing presses, printing history, and printing equipment and supplies; lithography; type and type-founding; bookbinding; newspaper publishing; and graphic design. Types of ephemera include advertisements, announcements, annual reports, brochures, clippings, invitations, trade catalogs, newspapers, programs, promotional materials, prospectuses, broadsides, greeting cards, bookmarks, fliers, business cards, pamphlets, newsletters, price lists, bookplates, periodicals, posters, receipts, obituaries, direct mail advertising, book catalogs, and type specimens. Materials printed by members of Moxon Chappel, a San Francisco-area group of private press printers, are extensive. Access Collection is open for research.
    [Show full text]
  • 4.3 Optical Properties
    Summary Mechanical pulping is a process for production of wood pulp in papermaking. Thermomechanical Pulp (TMP) and Groundwood (GW) are historically the two production methods used for mechanical pulping. Because of high electrical prices and increasing requirements in pulp quality it is of interest to improve the mechanical pulping process. The Advanced Thermomechanical Pulp (ATMP) process is a development of the TMP process developed to reduce the electrical energy consumption in production of mechanical pulp. ATMP also has better strength properties and optical properties compared to TMP. Andritz, Paper and Fibre Research Institute (PFI) and Norske Skog together have developed this production method throughout several pilot plant trials with excellent results. Mechanical pre-treatment of wood chips with a screw press and chemical addition in a high intensity primary refining stage are the features of the ATMP process. This process has recently been described (Hill et al. 2009, Hill et al. 2010, Gorski et al. 2011 and Johansson et al. 2011). Improvements in the electrical energy efficiency in refining of up to 0,65 MWh/odt or 34 % as well as higher brightness and lower shive contents compared to reference TMP pulp were shown for spruce raw material (Gorski et al. 2011) To further understand what happens with the pulp in ATMP process compared to the TMP process different investigations were carried out. Methylene blue sorption were evaluated and used to measure the total amount of anionic groups on both ATMP and TMP produced pulps. ATMP produced pulps achieved a higher number of acidic groups compared to pulps without addition of chemicals for not only the whole pulp but also for three different fractions of each pulp.
    [Show full text]
  • Effects of Matte Coating on the Paper Surface and Print Density
    DOI 10.1515/secm-2012-0070 Sci Eng Compos Mater 2013; 20(2): 141–145 Cem Aydemir * , Zafer Ö zomay , Arif Karademir and Emine Arman Kand ı rmaz Effects of matte coating on the paper surface and print density Abstract: In this work, standard laboratory printing appli- papers. Fiber properties such as coarseness, beating, filler cations with IGT (ISO 12647-2) were applied on uncoated loading, pressing, calendering and coating are some of and matte-coated papers using offset inks (DIN ISO 2846-1). the main factors that mostly affect the surface roughness Surface roughnesses of uncoated and coated sheets were and porosity of paper products. The diameters of pores recorded to be 195 and 13 ml/min, respectively. Air perma- and uniform distribution in the paper structure are also nence values of uncoated and coated papers were found important for ink absorption [1, 2] . to be 5.6 and 0.103 μ m/Pa · s, respectively. Changes in A liquid droplet touching a paper surface tends to both the print densities were recorded up to 48 h. Print den- penetrate into the paper structure and spread over the sity changes for uncoated and matte-coated papers were surface. The extent of penetration or spreading depends surprisingly found to be in similar paths (8 % in the first on both the properties of the paper and liquids (ink) and 4 h), although significant differences between surface environmental conditions like temperature, humidity and roughnesses were recorded. Furthermore, paper samples pressure. Inks can be classified into three main groups showed similar behaviors for the percent volume changes, according to the carrier medium as solvent-based, oil-based where drop volume disappeared within 6 min.
    [Show full text]
  • 7/1 Environmental Exposure Assessment ENV/JM/EEA(2004)
    For Official Use ENV/JM/EEA(2004)7/1 Organisation de Coopération et de Développement Economiques Organisation for Economic Co-operation and Development 17-Aug-2004 ___________________________________________________________________________________________ _____________ English - Or. English ENVIRONMENT DIRECTORATE JOINT MEETING OF THE CHEMICALS COMMITTEE AND For Official Use ENV/JM/EEA(2004)7/1 THE WORKING PARTY ON CHEMICALS, PESTICIDES AND BIOTECHNOLOGY Environmental Exposure Assessment DRAFT EMISSION SCENARIO ON PULP AND PAPER INDUSTRY KRAFT PULP MILLS Meeting of the Task Force on Envionmental Exposure Assessment, to be held in Vienna, Austria on 13-15 September 2004 Mr. Eisaku Toda Tel: +33 1 45 24 79 07, Fax: +33 1 45 24 16 73, E-mail: [email protected] English - Or. English JT00168124 Document complet disponible sur OLIS dans son format d'origine Complete document available on OLIS in its original format ENV/JM/EEA(2004)7/1 This document includes a draft emission scenario document (ESD) on pulp and paper industry kraft pulp mills, submitted by Canada. Action required: The Task Force is invited to review this document, and consider the next steps for the finalisation of the document. 2 ENV/JM/EEA(2004)7/1 Emission Scenario Document for Kraft Pulp Mills Prepared for Environment Canada Environmental Protection Service New Substances Branch Place Vincent Massey, 351 St. Joseph Blvd., 14th Floor GATINEAU, QUEBEC, CANADA K1A 0H3 Contact: Mr. Jonathan Tigner Tel: (819) 997-5804 Fax: (819) 953-7155 E-MAIL: [email protected] Prepared by Crechem Technologies Inc. 1438 Bradshaw Crescent Ottawa, Ontario, Canada K1B 5G2 www.crechem.com Contact: Jesse Shen Tel: (613) 744-6001 Fax: (613) 744-0573 E-mail: [email protected] In association with JANCO 4 De Caria Blvd.
    [Show full text]
  • Research and Development Washington, DC 20460 ABSTRACT
    United Slates EPA- 600 R- 95-045 7 Enwronmental Protection ZL6ILI Agency March 1995 i= Research and Developmen t OFFICE EQUIPMENT: DESIGN, INDOOR AIR EMISSIONS, AND POLLUTION PREVENTION OPPORTUNITIES Prepared for Office of Radiation and Indoor Air Prepared by Air and Energy Engineering Research Laboratory Research Triangle Park NC 2771 1 EPA REVIEW NOTICE This report has been reviewed by the U.S. Environmental Protection Agency, and approved for publication. Approval does not signify that the contents necessarily reflect the views and policy of the Agency, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. This document is available to the public through the National Technical Informa- tion Service. Springfield, Virginia 22161. EPA- 600 I R- 95-045 March 1995 Office Equipment: Design, Indoor Air Emissions, and Pollution Prevention Opportunities by: Robert Hetes Mary Moore (Now at Cadmus, Inc.) Coleen Northeim Research Triangle Institute Center for Environmental Analysis Research Triangle Park, NC 27709 EPA Cooperative Agreement CR822025-01 EPA Project Officer: Kelly W. Leovic Air and Energy Engineering Research Laboratory Research Triangle Park, NC 2771 1 Prepared for: U.S. Environmental Protection Agency Ofice of Research and Development Washington, DC 20460 ABSTRACT The objective of this initial report is to summarize available information on office ~ equipment design; indoor air emissions of organics, ozone, and particulates from office ~ equipment; and pollution prevention approaches for reducing these emissions. It should be noted that much of the existing emissions data from office equipment are proprietary and not available in the general literature and are therefore not included in this report.
    [Show full text]
  • 2011 Vendor Application Commodity List Expanded.Xlsx
    City of Dayton Commodity Code List Select the Entire Sheet to UNHIDE the Detail Rows Section COMMODITY_ID COMMODITY_NAME 005 00500 ABRASIVES 00514 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 00521 Abrasives, Sandblasting, Metal 00528 Abrasives, Sandblasting (Other than Metal) 00542 Abrasives, Solid: Wheels, Stones, etc. 00556 Abrasives, Tumbling (Wheel) 00563 Grinding and Polishing Compounds: Carborundum, Dia 00570 Pumice Stone 00584 Steel Wool 00599 Misc. Abrasives 010 01000 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIE 01005 Acoustical Tile, All Types 01008 Acoustical Tile Accessories: Channels, Grids, Moun 01009 Acoustical Tile Insulation 01011 Adhesives and Cements, Acoustical Tile 01014 Adhesives and Cements, Insulation 01017 Aluminum Foil etc. 01030 Bands, Clips, and Wires (For Pipe Insulation) 01038 Clips, Pins, etc. (For Duct Insulation) 01041 Cork: Blocks, Boards, Sheets, etc. 01045 Exterior Insulation and Finish Systems 01053 Fiberglass: Batts, Blankets and Rolls 01056 Foam Glass: Blocks, Sheets, etc. 01057 Foam‐in‐Place Insulation: Phenolic, Urethane, etc. 01059 Foam Plastics: Blocks, Boards, Sheets, etc. 01063 Insulation, Blown Type 01065 Jacketing (For Insulation): Canvas, Osnaburg, etc. 01070 Magnesia: Blocks, Sheets, etc. 01072 Mineral Wool: Blankets, Blocks, Boards 01075 Paints, Primers, Sealers, etc. (For Insulation) 01076 Paper Type Insulation Material (Cellulose, etc.) 01078 Pipe and Tubing Insulation, All Types 01081 Preformed Insulation, All Types (For Ells, Tees, V 01084 Rubber Insulation 01099 Misc. Acc.
    [Show full text]
  • Paper and Surface Chemistry – Part 1- Fiber Surface and Wet End Chemistry
    Paper and Surface Chemistry – Part 1- Fiber Surface and Wet End Chemistry Pedro Fardim Instituto de Química, Universidade Estadual de Campinas, SP, Brazil Present Address: Process Chemistry Group, Åbo Akademi University, Turku/Åbo, Finland Abstract Paper manufacturing and converting involves a multitude of surface chemical interactions. Beating, stock preparation, coating and converting processes are steps where surface phenomena play an important role for product consolidation and performance. Interactions between fibers and colloidal particles, polymers, minerals and, dyes are fundamental in papermaking and most of them are complex and not very well understood. Thus, many paper formulations are designed according to an empirical trial-and-error approach. This work is a critical literature review of some of the interactions present in papermaking, coating, and printing. In the first part, the current models for fiber surfaces and their interactions in the wet end are discussed. Limitations concerning the fiber surface definition and the available models based on direct observation, DLVO theory, and a combination of qualitative and quantitative approaches are highlighted. Complexity factors such as surface composition heterogeneity, contamination from manufacturing processes, and surface mobility are suggested to be considered. Surface interactions present in the wet end, with focus on reversible and irreversible flocculation as well as on the flocculation mechanisms concerning fibers, polymers and micro-particles are also discussed. The role of the fiber surface chemical composition on flocculation and flock size and the influence from the chemical medium in the paper machine is reviewed. Papermaking is suggested as being a fiber surface modification process once polymers and other chemicals are used to change the surface energy and chemical composition.
    [Show full text]
  • Migration Studies of Chloropropanols from Paperboard Packaging
    MIGRATION STUDIES OF CHLOROPROPANOLS FROM PAPERBOARD PACKAGING IN CONTACT WITH FOODSTUFFS by GREGORY V. PACE A Dissertation submitted to the Graduate School - New Brunswick Rutgers, The State University of New Jersey in partial fulfillment of the requirements for the degree of Doctor of Philosophy Graduate Program in Food Science written under the direction of Professor Thomas G. Hartman and approved by ________________________ ________________________ ________________________ ________________________ New Brunswick, New Jersey January 2011 ABSTRACT OF THE DISSERTATION Migration Studies of Chloropropanols from Paperboard Packaging in Contact with Foodstuffs By GREGORY V. PACE Dissertation Director: Professor Thomas G. Hartman The food processing of acid hydrolyzed vegetable protein (HVP) results in the chlorination of residual lipids to form chloropropanols. 3-chloro-1,2-propanediol (3-monochloropropane-1,2-diol; 3-MCPD), and 1,3-dichloro-2-propanol (1,3-DCP), are the most common chloropropanols found in HVP foods and also soy sauces. The manufacturing process of paperboard food packaging may also produce chloropropanols. 3-MCPD and 1,3-DCP can be found in paperboard when wet-strength resins made with epichlorohydrin are used. 1,3-DCP had been determined to be carcinogenic in rats and mice. 3-MCPD was a suspected carcinogen , and has recently been moving towards classification as a carcinogen. The European (EU) Commission and the US Food and Drug Administration (US FDA) have set maximum levels in food and food paperboard packaging for 3-MCPD ii and 1,3-DCP. In October 2010, 3-MCPD and 1,3-DCP were added to the California Proposition 65 list of compounds known to State to cause cancer.
    [Show full text]
  • Class Item Description 5 0 ABRASIVES 5 5 Abrasive Equipment and Tools 5 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, Etc
    Class Item Description 5 0 ABRASIVES 5 5 Abrasive Equipment and Tools 5 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 5 21 Abrasives, Sandblasting, Metal 5 28 Abrasives, Sandblasting (Other than Metal) 5 42 Abrasives, Solid: Wheels, Stones, etc. 5 56 Abrasives, Tumbling (Wheel) 5 63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. (For Valve Grinding Compounds See Class 075) 5 70 Pumice Stone 5 75 Recycled Abrasives Products and Supplies 5 84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 10 0 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 10 5 Acoustical Tile, All Types (Including Recycled Types) Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension Brackets, Tees, Wall Angles, and 10 8 Wires 10 9 Acoustical Tile Insulation 10 11 Adhesives and Cements, Acoustical Tile 10 14 Adhesives and Cements, Insulation 10 17 Aluminum Foil, etc. 10 30 Bands, Clips, and Wires (For Pipe Insulation) 10 38 Clips, Pins, etc. (For Duct Insulation) 10 41 Cork: Blocks, Boards, Sheets, etc. 10 45 Exterior Insulation and Finish Systems 10 53 Fiberglass: Batts, Blankets and Rolls 10 56 Foam Glass: Blocks, Sheets, etc. 10 57 Foam-in-Place Insulation: Phenolic, Urethane, etc. 10 59 Foam Plastics: Blocks, Boards, Sheets, etc. 10 62 Insulation, Interior 10 63 Insulation, Blown Type 10 64 Insulation, Loose Fill 10 65 Jacketing (For Insulation): Canvas, Osnaburg, etc. 10 70 Magnesia: Blocks, Sheets, etc. 10 72 Mineral Wool: Blankets, Blocks, Boards 10 75 Paints, Primers, Sealers, etc. (For Insulation) 10 76 Paper Type Insulation Material (Cellulose, etc.) 10 78 Pipe and Tubing Insulation, All Types 10 81 Preformed Insulation, All Types (For Ells, Tees, Valves, etc.) 10 83 Recycled Insulation Materials and Supplies, All Types 10 84 Rubber Insulation 15 0 ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC.
    [Show full text]
  • Pulp & Paper Chemicals
    Freedonia Industry Study #1531 Study Publication Date: March 2002 Price: $3,800 Pulp & Paper Chemicals Pages: 268 Pulp & Paper Chemicals, a new study from The Freedonia Group, provides you with an in-depth analysis of major trends in the industry and the outlook for product seg- ments and major markets -- critical information to help you with strategic planning. This brochure gives you an indication of the scope, depth and value of Freedonia's new study, Pulp & Paper Chemi- cals. Ordering information is included on the back page of the brochure. Brochure Table of Contents Study Highlights ............................................................................... 2 Table of Contents and List of Tables and Charts ............................. 4 Sample Pages and Sample Tables from: Market Environment .................................................... 6 Products....................................................................... 7 Demand by End User .................................................. 8 Industry Structure ........................................................ 9 Company Profiles ...................................................... 10 List of Companies Profiled ........................................ 11 Forecasting Methodology ............................................................... 12 About the Company ....................................................................... 13 Advantages of Freedonia Reports ................................................... 13 About Our Customers ...................................................................
    [Show full text]
  • The Fundamentals of Papermaking Materials
    Preferred citation: A. Swerin and L. Ödberg. Some aspects of retention aids. In The Fundametals of Papermaking Materials, Trans. of the XIth Fund. Res. Symp. Cambridge, 1997, (C.F. Baker, ed.), pp 265–350, FRC, Manchester, 2018. DOI: 10.15376/frc.1997.1.265. SOME ASPECTS OF RETENTION AIDS Agne Swerin and Lars Ödberg STFI, Swedish Pulp and Paper Research Institute Box 5604, S-114 86 Stockholm, Sweden ABSTRACT Fundamental aspects on polymer adsorption and flocculation phenomena are reviewed . Special emphasis is placed on recent developments . Examples are the mode of action of microparticle retention aid systems and of retention systems based on polyethylene oxide/phenolic resin. Fibre flocculation and the strength of fibrous networks are affected by retention aids and this is discussed in, connection with investigations on retention and formation in the laboratory and on pilot-scale paper machines . 266 INTRODUCTION This review article deals primarily with retention aids. Other papers presented at this symposium are devoted to other paper chemicals such as sizing agents and strength aids. Some of the discussion in this paper, e.g, on the adsorption of polyelectrolytes, is of course of relevance for some of these other areas as well. There are already extensive reviews available concerning retention aids and retention mechanisms (1, 2) and this review is therefore concentrated on more recent developments especially those not covered in the earlier reviews. We do not, however, claim to have covered all developments . There is, of course, some emphasis on the work done at STFI, primarily since this work is very familiar to us.
    [Show full text]