406 9th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603
Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845
www.hickorysawandtool.com
Table of Contents Cover page……………………………………………………………………….……..1-2 Dedicated Insert raised panel cutters……………………………..……………….…….3-4 Stile & rail cutter sets…………………………………………………………….……..5-6 Multi-profile cutters……………………………………………………………….…….7-8 Finger joint cutters………………………………………………………………….……..9 Pricing on Service work, saw blades, dado sets……………………………………...10-16 ICK Inserts……………………………………………………………………………17-18 Panel saws……………………………………………………………………………….19 Split scoring & conic scoring saws………………………………………………………20 Hogging units…………………………………………………………………….…..21-22 Type “C” four flute countersinks………………………………………………...………23 Woodworking drills, countersinks, multi-spur and boring bits………………………24-51 Diamond tipped cutters and router bits……………………………………………….52-53 Hydraulic and straight bore moulder heads…………………………………………..54-55 HSS, jointer and planer knives……………………………………………………….56-57 Tool holders & collets .…………………………………..…………………………..58-59 ONSRUD ……..………………………………………………………………….…60-126 Solid carbide bits……..……………………………………………………………127-130 Carbide tipped straight bits………………………………………………………...131-132 Stagger tooth & mortise bits…………………………………………………………....133 Round and half-round bits ………………………………………………………….….134 V-Groove, Panel, and cove bits…………………………………………………….…..135 Rabbeting, round-over, ogee, flush, and Laminate bits………………….………..136-140 Solid Surface and T-Slot bits……………………………………………………...141-142 Edge profile bits…………………………………………………………………...143-145 Handrail & Molding bits……………………………………………………………..…146 Glue joint bits……………………………………………………………………...147-148 Groove profiles…………………………………………………………………………149 MDF door profiles…………………………………………………………………...…150 Stile & rail router bits………………………………………………………………...... 151 Raised panel router bits……………………………………………………………..….152 Cabinet, Door & Drawer, Window Sash bits……………………………………...153-155 Dovetail bits…………………………………………………………………………….156 Spoilboard & Slotting...... ……………………………………………………..157 Dowel drills & Boring Bits...... …………………………………….158 Bearings & Accessories……………………………………………………………159-160 Pricing for pages (127-160)………………………………………………………..161-166 Conversion Charts…………………………………………………………………167-169
Page 2
RAISED PANEL CUTTERS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 6” CUTTING CIRCLE BORE: 1-1/4” WINGS: 3
Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request.
CUSTOM PROFILES AVAILABLE
Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools.
MADE IN THE USA
These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results.
Hickory Saw & Tool 1-800-762-8999 Page 3 Fax 1-800-762-6845
RAISED PANEL CUTTERS
Page 4
STILE AND RAIL CUTTER SETS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 4” SMALL CUTTING CIRCLE BORE: 1-1/4” WINGS: 3
Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request.
CUSTOM PROFILES AVAILABLE
Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools.
MADE IN THE USA
These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results.
Hickory Saw & Tool 1-800-762-8999 Page 5 Fax 1-800-762-6845
STILE AND RAIL CUTTER SETS
Page 6
MULTI-PROFILE CUTTERS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups. Utilizes HSS corrugated back backing plates so multiples of profiles can be achieved using only one cutter by just changing the inserts and backers. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 4” SMALL CUTTING CIRCLE BORE: 1-1/4” WINGS: 3
Available in 40mm or 60mm wide; Clockwise or Counterclockwise rotation achieved with same cutter; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request.
MOULDER & TENON HEADS ALSO AVAILABLE
These insert cutters can be supplied in any diameter and bore size per your requirements. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools.
MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results.
Hickory Saw & Tool 1-800-762-8999 Page 7 Fax 1-800-762-6845
MULTI-PROFILE CUTTERS
Page 8 Hickory Saw & Tool 1-800-762-8999 Page 9 Fax 1-800-762-6845 PRICE LIST FOR C.T. CIRCULAR SAW BLADES ======#OF TEETH DIA. > 0 TO 18" OVER 18" UP TO 36" ------0 - 29 ...... $10 . 00 ...... $16 . 00 30 - 40 ...... $14 . 00 ...... $24 . 00 41 - 60...... $15 . 00 ...... $25 . 00 61- 100...... $16 . 00 ...... $27 . 00 101 - 120...... $17 . 00 ...... $30 . 00 TIP REPLACEMENT ======U P TO .220 KERF ...... $1 . 50 EA. TIP OVER .220 KERF...... SEE GROOVER TIP PRICE COMPLETE RETIP ======TIP PRICE (X) NUMBER OF TEETH (NO SHARPENING CHARGE)
======DADO SETS ======DADO SAWS ...... SEE SHARPENING PRICES DADO FILLERS: KERF SHARPENING TIP REPLACEMENT ------1 / 16 ...... $ 6 . 00 ...... $4 . 00 (EA. TIP) 1 / 8 ...... $ 6 . 00 ...... $4 . 00 (EA. TIP) 3 / 1 6 ...... $ 6 . 00 ...... $4 . 00 (EA TIP) 1 / 4 ...... $ 8 . 00 ...... $5 . 00 (EA. TIP) 5 / 16 ...... $ 8 . 00 ...... $6 . 00 (EA. TIP) 3 / 8 ...... $ 8 . 00 ...... $7 . 00 (EA. TIP) 1 / 2 ...... $10. 00 ...... $8 . 00 (EA. TIP) RETIP...... #OF TIPS (X) TIP PRICE (NO SHARPENING CHARGE)
======MISCELLANEOUS SAW CHARGES OPENING BORE CHARGES ======UP TO 1" ...... $ 15 . 00 1" TO 1 1/2"...... $ 20 . 00 1 1/2" TO 2 1/2"...... $ 25 . 00 OVER 2 1/2" ...... $ 30 . 00 KEYWAYS BUSHINGS $20.00 EA UP TO 1"...... $ 15 .00 1" TO 2"...... $ 20 .00 2 TO 3" . . . . .$ 25 .00
HAMMER AND ROLL FOR TENSION AND STRAIGHTNESS UP TO 18" ...... $2 . 00 PER INCH OF DIAMETER OVER 18" ...... $3 . 00 PER INCH OF DIAMETER
Page 10 PRICE LIST FOR SHARPENING CARBIDE TIPPED WING CUTTER ======# OF WINGS CUTTING EDGE WIDTH 1 / 2" 1" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4- 1/2" ======2 $16.00 $16.00 $17.50 $17.50 $17.50 $20.50 $20.50 20.50 $22.50
3 $19.00 $19.00 $20.50 $23.00 $23.00 $23.00 $25.00 $25.00 $25.00
4 $20.00 $20.00 $22.50 $25.00 $25.00 $25.00 $27.50 $27.50 $27.50
6 $22.00 $22.00 $25.50 $29.00 $29.00 $29.00 $30.50 $30.50 $30.50
8 $25.00 $25.00 $28.00 $33.00 $33.00 $33.50 $35.50 $35.50 $35.50
10 $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $39.50
12 $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $39.50
(PRICE FOR OVER 4-1/2" WIDE: ADD $3.00 PER EACH 1/2" LARGER WIDTH) (RETIP PRICES QUOTED UPON REQUEST PER CUTTER) ======PRICE LIST FOR GROOVERS # OF WINGS===== KERF> 1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" ======2 ...... $9.50 $10.00 $10.00 $11.50 $12.75 3 ...... $11.50 $11.75 $12.50 $13.25 $14.25 4 ...... $12.00 $12.25 $13.25 $14.00 $15.00 6 ...... $13.75 $14.50 $16.00 $16.50 $15.75 8 ...... $15.00 $15.75 $17.00 $18.00 $20.25 10 ...... $16.50 $17.25 $18.75 $19.75 $21.50 12 ...... $19.00 $20.50 $22.50 $23.00 $24.50 18 ...... $22.00 $23.50 $25.25 $26.00 $28.00 24 ...... $25.25 $26.50 $29.00 $30.00 $31.75
FOR KERFS OVER 3 / 4" GO TO CUTTER PRICE TIP REPLACEMENT FOR GROOVERS
1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4"
$8.00 $8.00 $10.00 $12.00 $15.00
COMPLETE RETIP=+ #OF TIPS --NO SHARPENING CHARGE
Hickory Saw & Tool 1-800-762-8999 Page 11 Fax 1-800-762-6845 PRICE LIST FOR SHARPENING PROFILE HEADS
======
# OF WINGS UP TO 6" LONG OVER 6" LONG ------2 $22.50 $24.00
4 $24.50 $26.00
6 $24.50 $32.00
8 $27.50 $32.00
FOR MORE WINGS GO TO MOULDER HEAD PRICE ======TIP REPLACEMENT IN PROFILE HEADS ======
1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" $8.00 $9.00 $10.00 $11.00 $13.00
COMPLETE RETIP = # OF TIPS NO SHARPENING CHARGE ======PRICE LIST FOR SHARPENING SPIRAL PROFILE HEADS
UP TO 6" LONG...... $34.50 OVER 6" LONG...... $49.00 TIP REPLACEMENT ON SPIRALS QUOTED PER HEAD
======PRICE LIST FOR SHARPENING STAGGERED TOOTH MOULDER HEADS WIDTH ROWS OF TEETH PRICE 4 4 $31.50 4 6 $33.50 4 8 $36.50 4 12 $43.50 6 6 $41.50 6 8 $49.00 6 12 $53.00 8 6 $55.00 8 8 $60.00 8 12 $70.00 10 6 $61.50 10 8 $65.00 10 12 $75.50 12 8 $83.00 12 12 $93.00
Page 12
PRICE LIST FOR MISC. ITEMS ======
HSS AND C.T. CARVING CUTTERS WIDTH:
0 TO 2" CEL. SHARPEN AND TURN DOWN COLLARS ------$45.00
======
HSS AND CT ROUTER BITS
STRAIGHT CUT ...... $8.00 GROUND TO PATTERN 2 WING...... $19.00 GROUND TO PATTERN 4 WINGBUC...... $22.00 REGRIND ENDS ...... $ 2.50 CUT OFF ...... $ 3.50 REPROFILE 2 X SHARPENING PRICE ======
HAUNCHING CUTTERS ------SHARPENING
2 PC. X 3" MAX CEL...... $ 35.00 3 PC. OR 3" PLUS CEL...... $ 47.50
RETIP - - 3/4" TO 1-1/2" ...... $ 105.00 EA. PC. 1- 9/16" TO 3" ...... $ 150.00 EA. PC.
======
STRAIGHT CUTTING EDGE CORR.BACK MOULDER KNIVES
HSS $1.00 PER INCH OF CEL. C. T. $2.70 PER INCH OF CEL. ======
GROUND TO PATTERN SHAPER & MOULDER KNIVES PER KNIFE SHARPEN & REPROFILE - COST PLUS $10.00 TEMPLATE CHARGE
HSS WIDTH OF KNIFE: 1" ------2" ------3" ------4" $13.00 ------$17.00 - - - - - $21.00------$22.00 ------REPROFILE ONLY ------$13.00 TEMPLATE CHARGE ------C. T. WIDTH OF KNIFE: 1" ------2" ------3" ------4" $19.00 ------$21.00 ------$23.00 ------$25.00
Hickory Saw & Tool 1-800-762-8999 Page 13 Fax 1-800-762-6845 PRICE LIST FOR MISC. ITEMS
======DRILL SHARPENING HSS. AND C.T.
CARBIDE TIPPED HSS BRADPOINT 1 / 8 " TO 1 / 2 " - - - $4.50 ======UP TO 5 / 16 " ------$2.00 33 / 64 " TO 1" - - - - - $5.50 ======11 / 32 " TO 1 / 2" $3.00 9 / 16 "TO 3 / 4" $4.50 13 / 16 " TO 1-1 / 8 " - - - $6.50
======MULTI SPUR BIT SHARPENING HSS SHARPENING C.T. SHARPENING UP TO 1-1 / 2 " DIA. ------$8.00 EA...... $9.50 EA. 1 - 9 / 16 " TO 2 - 1 / 2 " - - $9.50 EA...... $11.00 EA. 2 - 9 / 16 " TO 3 - 1 / 2 " - - $10.00 EA ...... $12.50 EA. OVER 3 - 1 / 2" ------$14.00 EA ...... $16.00 EA.
MULTI SPUR TIP REPLACEMENT ------1 - 4 TIPS ...... $ 10.00 EA. TIP 5 + TIPS ...... $ 9.00 EA. TIP CHIP LIFTERS...... $ 25.00 EA. TIP
======STEEL MOULDER FEED WHEEL SHARPENING
UP TO 2 " - - - - -$65.00 EA ------2 " TO 3 " ------$80.00 EA. OVER 3 " WIDE ADD $10.00 PER INCH OF WIDTH (STANDARD FEED WHEELS ONLY - OTHERS QUOTED UPON REQUEST) REMILLING GROOVES IN FEED WHEELS ------$60.00 EA. REHARDENING FEEDWHEELS ------$35.00 EA.
======
BANDSAW GUIDE WHEELS # 0 WHEELS - - - -$ 110.00 EA ...... # 1 WHEELS - - - -$ 120.00 EA.
======BANDSAW GUIDE JAWS PLAIN JAWS C. T. JAWS # 0 - - $80.00 EACH SET OF 4 PCS...... 0 - - $ 110.00 EACH SET OF 4 PCS. # 1 - - $90.00 EACH SET OF 4 PCS...... 1 - - $ 120.00 EACH SET OF 4 PCS. RETIP BANDSAW GUIDE PRICE ------$ 10.00 PER END TANNEWITZ R - 84 AND R- 84A JAWS PLAIN AND CT ARE AVAILABLE BANDSAW THROAT PLATES - - - - -SQUARE $ 38.00 EA. ROUND $48.00 EA. ======
Page 14 PRICE LIST FOR BANDSAW BLADES AND ROLL STOCK ======LENGTH WIDTH (IN FEET)--- 1 / 8 3 / 16 1 / 4 3 / 8 1 / 2 3 / 4 ------9 10.50 10.50 10.50 10.50 10.50 13.00 ------10 11.00 11.00 11.00 11.00 11.00 13.00 ------11 11.50 11.50 11.50 11.50 11.50 15.00 ------12 12.00 12.00 11.50 11.50 11.50 15.00 ------13 12.50 12.50 11.50 11.50 11.50 16.00 ------14 13.00 13.00 12.50 12.50 12.00 16.00 ------15 13.50 13.50 12.25 12.25 12.25 17.00 ------16 14.00 14.00 13.00 13.50 14.00 18.00 ------17 14.00 14.00 13.00 13.50 14.00 19.00 ------18 15.00 15.00 13.50 14.50 14.50 20.00 ------19 16.50 16.50 15.00 15.50 16.00 22.00 ------20 17.00 17.00 15.00 15.50 16.00 22.00 ------21 17.50 17.50 16.00 16.50 17.00 22.00 ------22 18.00 18.50 16.00 17.50 17.00 22.00 ------FOR IN BETWEEN SIZES GO TO THE NEXT LONGER SIZE
ALL WOOD CUTTING BLADES UP TO 8' LONG - - -$9.00 EA STANDARD METAL CUTTING 64-1/2" X 1 / 2 - - -$10.00 EA
BANDSAW STOCK ROLL PRICES .025 OR .032 THICK
1 / 4 - - - -$125.00 3 / 8 - - - -$139.00 1 / 2 - - - -$167.00 3 / 4 - - - -$175.00
WELD PRICES UP TO 1 / 2 WIDE - - - -$4.00 OVER 1 / 2 WIDE - - - -$5.00 BI-METAL BLADES - - - $10.00
SHARPENING CHARGE FOR BLADES UP TO 3 / 4 WIDE - - - -$4.50 OVER 3 / 4 WIDE - - - -$9.00
SHARPENING CHARGE FOR SPIRAL ROUTER BITS
UP TO 1/2"DIA. 2 WING UPCUT OR DOWNCUT ...... $10.00 5/8"DIA. AND UP...... $15.00 3 WING AND UP (ANYSIZE)...... $15.00
SPIRAL COMPRESSION...... 2 FLUTE...... $15.00 ...... 4FLUTE...... $25.00
Hickory Saw & Tool 1-800-762-8999 Page 15 Fax 1-800-762-6845 NEW CARBIDE TIPPED SAWS (FLAT A.T.B. & T. CHIP) ======DIAMETER
NO. TEETH 8" 10" 12" 14" 16" 18" ======20 $70.25 72.75 $78.75 82.75 $87.00 $90.50 24 $77.00 78.75 $89.00 92.75 $95.25 $100.50 30 $92.50 95.00 $96.50 98.00 $102.50 $106.50 36 $100.00 102.00 $103.75 106.00 $110.00 $112.50 40 $104.75 106.25 $108.50 112.50 $118.25 $121.75 48 $114.25 116.00 $118.25 122.25 $128.25 $132.00 60 $128.25 129.75 $133.75 137.75 $139.25 $145.00 72 $143.00 144.50 $148.75 152.50 $156.50 $159.75 80 $163.50 165.50 $167.75 173.50 $177.00 $180.50 90 ------$187.25 191.25 $195.00 $198.50 96 ------$194.25 198.25 $202.00 $206.00 100 ------$204.75 210.75 $214.50 $217.50 120 ------235.25 $243.00 $243.00
DADO HEADS
DADO SAWS------PER ABOVE SAW SCHEDULE
NEW DADO FILLERS:
1 / 16" 1 / 8" 1 / 4" ======
10” X 5/8 OR 1” BORE…. $34.50 $35.25 $47.25 12” X 1” BORE…………... $36.50 $37.00 $60.50 14” X 1” BORE…………. $41.25 $56.50 $68.25
(Providing filler blanks are available)
BORING CHARGES FOR NEW SAWS ONLY
UP TO 1” ...... $15.00 1” TO 1- 1 / 2 “...... $20.00 1- 1 / 2” TO 2- 1 / 2 “...... $25.00
Page 16 Standard reversible knives Standard Wendeschneidplatten 35° Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard
L W T a T04F T03SMG T10MG TL15 T08SMG mm mm mm mm
7.5 12.0 1.5 12001 13811 13963 13734 14225 8.6 12.0 1.5 13182 9.0 12.0 1.5 12043
9.6 12.0 1.5 12015 13850 14010 30833 10.0 12.0 1.5 13165 10.5 12.0 1.5 13167
11.0 12.0 1.5 13168 11.6 12.0 1.5 13183 13.0 12.0 1.5 13170
13.6 12.0 1.5 13185 14.6 12.0 1.5 13186 15.0 12.0 1.5 12003 13819 13972 13741 14232
15.7 12.0 1.5 13172 16.0 12.0 1.5 13203 17.0 12.0 1.5 13173
18.0 12.0 1.5 13174 19.0 12.0 1.5 13175 20.0 12.0 1.5 12004 13823 13977 13745 14235 25.0 12.0 1.5 12025 13853 14013 13766
25.0 12.0 1.5 14.0 12011 13843 14001 13759 30.0 12.0 1.5 14.0 12005 13828 13982 13749 14239 35.0 12.0 1.5 26.0 13208
40.0 12.0 1.5 26.0 12014 13847 14006 13763 14255 50.0 12.0 1.5 26.0 12006 13834 13987 13753 14244 60.0 12.0 1.5 26.0 12007 13839 13994 13754 14248
L W T a T08MF T03SMG T10MG TL15 T08SMG mm mm mm mm
80.0 13.0 2.2 60.0 12008 13841 13997 13755 100.0 13.0 2.2 60.0 12009 30831 13998 13756 120.0 13.0 2.2 60.0 12010 30832 13999 13757
L W T a T04F T03SMG T10MG TL15 T08SMG mm mm mm mm
20.0 9.0 1.5 13195
24.0 9.0 1.5 14.0 13197 30.0 9.0 1.5 14.0 13199 40.0 9.0 1.5 26.0 13200 50.0 9.0 1.5 26.0 13201
Hickory Saw & Tool 1-800-762-8999 Page 17 Fax 1-800-762-6845 Standard reversible knives Standard Wendeschneidplatten Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard
L W T d T08MF T04F T03SMG T10MG TL15 mm mm mm mm
10.5 10.5 1.5 35° 4.0 13259 13863 14027 13769 12.0 12.0 1.5 35° 4.0 12002 13815 13968 13737 13.0 13.0 2.5 35° 4.0 13328
17.0 17.0 2.0 35° 3.0 16565 16564 17.0 17.0 2.0 35° 4.0 13266 13265 13864 30830 13770 19.0 19.0 2.0 35° 4.0 13264 30838 30827 30826
10.5 10.5 1.5 35° 40343 13.0 13.0 2.5 30° 13324 13.6 13.6 2.0 30° 13299 13.6 13.6 2.0 45° 37522
14.0 14.0 1.2 30° 13295 14.0 14.0 1.7 22° 13297 14.0 14.0 1.7 30° 13307 14.0 14.0 2.0 30° 13273 13260 13865 14028 13771
For Holz-Her system* 14.0 14.0 1.2 30° 13303
14.3 14.3 2.5 35° 13329 14.6 14.6 2.5 30° 13314 15.0 15.0 2.5 30° 13315
14.0 14.0 2.0 30° 13276 15.0 15.0 2.5 30° R=50 43895 15.0 15.0 2.5 30° R=150 13320
15.0 15.0 2.5 30° 44289
14.0 14.0 2.0 30° 44486
21.0 21.0 5.5 40° 22695
Page 18 Hickory Saw & Tool 1-800-762-8999 Page 19 Fax 1-800-762-6845 Page 20 Hickory Saw & Tool 1-800-762-8999 Page 21 Fax 1-800-762-6845 Page 22 Fuller Countersinks · Counterbores · Tapered Drills · Plug Cutters · Step Drills · Stop Collars Type ‘C’ Four Flute Countersinks
Stock Sizes Drill Stock Cutting Overall Hole C8 Number Diameter Length Size C2 1/4 5/64 3/4 C3 1/4 3/32 3/4 C4 5/16 7/64 7/8 Used to countersink and counterbore for heads of screws in woods, C44 5/16 1/8 7/8 plastics and non-ferrous materials. Heat treated for long tool life. C4 C65 5/16 9/64 7/8 (see explanation on page 3 and size recommendations on page 4) C410 5/16 5/32 7/8 C411 5/16 11/64 7/8 C43 5/16 3/16 7/8 The countersink is held in place with two hex-socket screws and is easily C56 3/8 3/32 7/8 adjustable up and down the drill so only one countersink and length of drill is C57 3/8 7/64 7/8 required for one screw size. * C5 3/8 1/8 7/8 * C6 3/8 9/64 7/8 C92 * C7 3/8 5/32 7/8 * C8 3/8 11/64 7/8 * C9 3/8 3/16 7/8 Shown above Mounted on a Taper Point Drill with Stop Collar: C913 3/8 13/64 7/8 This combination of Tapered Drill and Countersink, drills, C97 3/8 7/32 7/8 Countersinks and Counterbores in one quick operation. Makes C105 7/16 5/32 7/8 driving screws easier and assures the best possible holding power. C1011 7/16 11/64 7/8 Designed for clean cutting and hardened for long wear. Complete C103 7/16 3/16 7/8 list of Taper Point Drills shown on page 6 & 7. Stop Collar (shown * C10 7/16 13/64 7/8 above mounted on Type “C” Countersink) can be furnished to C1014 7/16 7/32 7/8 control depth of cut. Stop Collar sizes are shown on page 6. C104 7/16 1/4 7/8 C122 1/2 1/8 7/8 C16 C129 1/2 9/64 7/8 C125 1/2 5/32 7/8 C1211 1/2 11/64 7/8 * C92 1/2 3/16 7/8 * C102 1/2 13/64 7/8 * C12 1/2 7/32 7/8 Shown above Mounted on a Brad or Regular Point Drill: C1415 1/2 15/64 7/8 This combination can be used to drill and countersink clearance * C14 1/2 1/4 7/8 through the material for screws and bolts or to drill pilot holes for C145 5/8 5/32 1-1/16 other types of screws. The Countersinks can also be mounted on * C143 5/8 3/16 1-1/16 ordinary straight twist drills allowing the screw thread to cut its C167 5/8 7/32 1-1/16 own hole or by using correct pilot drill size for root diameter of * C16 5/8 1/4 1-1/16 thread allowing shank of screw to force its way into the wood. See C244 C1617 5/8 17/64 1-1/16 Screw Chart on page 4 for screw sizes. * C169 5/8 9/32 1-1/16 C1619 5/8 19/64 1-1/16 Drills are not included unless specified. Types and sizes are shown * C18 5/8 5/16 1-1/16 on pages 36 through 42. To cut wood plug to fit in hole over head C243 3/4 3/16 1-1/8 of screw, use matching Plug Cutter shown on page 9. C247 3/4 7/32 1-1/8 C244 3/4 1/4 1-1/8 Special sizes - Quotation on request. C245 3/4 5/16 1-1/8 For left hand cutting add 50% to prices shown in price list and add C20 3/4 21/64 1-1/8 L to stock number. C24 3/4 3/8 1-1/4 C284 7/8 1/4 1-1/4 Price includes two hex-socket set screws. Does not include drill or C285 7/8 5/16 1-1/4 stop collar. See page 118 &119 for replacement set screws and hex C286 7/8 3/8 1-1/4 keys. C287 7/8 7/16 1-3/8 C324 C324 1 1/4 1-3/8 Also see page 117 for all sizes of Countersinks mounted on C326 1 3/8 1-3/8 Taper Point Drills (and Stop Collars if required). C328 1 1/2 1-1/2
Hickory Saw & Tool 1-800-762-8999 Page 23 Fax 1-800-762-6845
* Indicates most popular sizes contained in sets.