Duluth 800.951.9899

Total Page：16

File Type：pdf, Size：1020Kb

DULUTH 800.951.9899 EXTERIOR SIDING LOG SIDING & PANELS Cedar Plain Bevel Siding (Knty) ACCESSORIES OSB Cedar Rabbeted Bevel Siding Available with the VX Pro Factory Durastrand pointSIX® (Knty) Finish AdvanTech® Cedar Tongue & Groove Siding Norway Hewn® Hand Hewn Log Zip System® Wall Sheathing Shakertown® Premium Shingle Siding Arauco Plywood Panels North Country Smooth Log Siding: BBOES Plyform Pine Drop Siding Full & Half Log Patterns Aspen & Fir Sheathing Breckenridge® by Roseburg Rough Rider™ Time Captured AC | CDX | Underlayment SYP & Fir Panels Siding CCA & MCA Evolutions – Thermally Modified Trapper’s Lodge Hand-Crafted Concrete Form Wood Rustic Pinnacle Premium Shingle Panels Hewn Timber Siding & Trim DECKING, RAILING & Arauco Plywood siding /AC/UL Timber Frame Log Siding FENCING Hatchet Hewn & Circle Sawn Deckorators® Decking | Railings BOARDS & DIMENSIONS Log Corners & Deck Accessories Spruce & Pine Dimension Outside Corners, Posts & Tails XGUARD & XGUARD BROWN Cedar/DF Timbers S4S & (Hand Hewn & Smooth) Treated Decking & Railings PRIMED PRODUCTS Brite Sawn Log Window & Door Trim (Environmentally Preferred Hi-line (Hand Hewn, Smooth & Flat) Product) Wynndel KD Pine Boards S4S EE Preassembled White Cedar Log Cedar KD Two-Face STK Radius Pine Boards Railing Systems & Components Edge Prefinished Pine Boards Custom cut Douglas Fir Decking #2 & #3 LP S4S #3 & Cedar Timbers Cedar Square Edge & Angled #4 ESLP/PP Spindles Radiata C&Btr pine bds PATTERNS* Cedar Railing Components Cedar Boards from Teal Cedar Alder | Ash | Aspen | Basswood | Cedar Split Rail Fencing Select Structure S4S Hickory | Cedar | Cherry | Birch | Furring Strips Oak | Signature Pine SERVICES PrimeLinx® Radiata Pine trim *Not all patterns available in all Custom Milling | Precision End boards species. Trimming | Factory Pre-finishing XGUARD & XGUARD BROWN Available with the Advantage Clear Advantage Clear Pressure treated or Advantage Plus Pre-stained Advantage Plus Pre-stained: MCA-treated boards & dimension: Factory Finish Whitewash | Cedar | Golden Pine | AG | GC | PWF Matchlock™ Premium End- Aged Pine | Fruitwood | Traditional White Fir | Cedar Matched WP4 Paneling Cherry XGUARD Treated Timbers - Master Carved & Custom Carved VX Pro Exterior: Sierra Sunrise | Also available with Trapper’s Wood Paneling Amber Wheat | Moosewoods | Lodge Hewing Rough Rider Time-Captured Adirondack Ridge | Northwoods Paneling Timber | Majestic Oak SHAKES & SHINGLES WP4 & WP6 Shakertown™ Premium Shingle Carsiding Panels Primelinx® Cedar Shakes Beaded Ceiling #1 Medium & Heavy Centermatch Hip & Ridge Drop Siding Cedar Shingles Base & Casing (Flat & Princeton II) #1 5X | Hip & Ridge | #2 5X Pinnacle Shingle Panels ENGINEERED LUMBER onCENTER® LVL 2.0 bluelinxco.com.

Copy Link

Recommended publications

Making a Ladle Drew Langsner Offers a Step-By-Step Guide to Making a Ladle with a Few Tools
Project Spoon Carving The diamond section on the stem looks and feels good Making a ladle Drew Langsner offers a step-by-step guide to making a ladle with a few tools wedish woodworker Wille Sundqvist introduced me to spoon carving on a serendipitous visit to our mountain Sfarmstead in 1976. Wille was in the US as the curator and demonstrator for an exhibit of traditional Swedish handcrafts in New York City. When the exhibit closed, a mutual friend led Wille on You should be able to achieve a winding path from Vermont to southern most of the shaping with an axe Appalachia to meet American woodworkers. We were among the fortunate few to meet this tall, thin Viking with a sheath knife hanging from his belt. Where to start This was woodworking that ﬁts my life. I was hooked on sloyd and believed that it was an approach worth spreading in this country. We invited Wille back, and his classes in Carving Swedish Woodenware were the start of Country Workshops’ course in traditional woodworking in 1978. As with most types of woodworking, there are many traditional and contemporary approaches to carving a spoon. A great deal depends on what tools and materials are available. For this article I will emphasize traditional, hand carved techniques, but I won’t feel compelled to stay strictly within the old methods. The tool kit can be kept simple and portable – perfect for taking on a vacation. Spoon carving utilises some very sharp tools that can cause serious injuries. Because these tools are used free hand – they are not jigged or fenced – it is woodworker strived to develop his skills with axes, a The ﬁner work cleaning up the blank is done with a small axe, chipping away the bark.
[Show full text]
MT Multilayer Pipes the Stable Combiners
MT multilayer pipes The stable combiners • Drinking water installations • Radiator connections • Special applications DESIGNED FOR YOU. The high-performance partner Hewing – the reliable supplier for high-performance plastic pipe technology. In Hewing GmbH’s plants, all processes are The company maintains strong, Hewing offers an extensive portfolio of pipe focused on the fulfi lment of individual client successful partnerships with its clients. solutions. Moreover, we develop customized requirements. products for market introduction in close cooperation with our customers. Here, customers can benefit from a di- The components are used in drinking specifically defined training events and verse product range, which leaves nothing water installation, radiator connection and fl exible logistics. to be desired. Hewing provides custom surface regulation systems as well as in manufacturing according to clients’ speci- other special applications. Hewing clearly Environmental awareness is a signifi cant fi c requirements. This is ensured via: focuses on supplying companies who quality criterion for Hewing. From product provide complete systems. A successful development to manufacture and delivery, Sophisticated, fl exible production of concept on a global scale, the export it plays a decisive role. For example, thanks butt welded multilayer pipes quota is above 50 %. to the active environmental policy of the (MT multilayer pipes), company, production waste is 100 % re- the world’s largest manufacturing The service benef t cycled both in-house and externally. facility for physically cross-linked When you select Hewing, you select high polyethylene pipes (PE-Xc pipes), quality, without compromise. This also including two plants for physical applies to the versatile range of services cross-linking, accompanying its products, which is competent and innovative research specially designed to support system and development.
[Show full text]
Wood Turning • Bowl Hewing 55
WOOD TURNING • BOWL HEWING 55 Turning Boxes with Threaded Lids. Bill Projects for the Mini Lathe. Dick Sing. Step- Wood Lathe Projects for Fun & Proﬁ t. Dick Bowers. A step-by-step guide for turning six by-step instructions show woodturners how to Sing. Text written with and photography by Alison somewhat complicated, cleverly designed, make small decorative magnets, bolo tie slides Levie. Four wood lathe projects, easy enough threaded-lid boxes. Four techniques of hand with matching earrings, switch knobs that attach for the beginner and fun enough for everyone. thread-chasing are described, so readers are to lamps, and handy little brushes. Dick illustrates With step-by-step instructions illustrated with ready for any circumstance. The use of a rose techniques for holding your work piece, the use clear full-color photographs, Dick Sing turns a engine lathe is demonstrated to place ornamental of concentric and offset inlays, and how to add clock holder, a candle dish, a desk set with a designs on many of the pieces. A photo gallery embellishments like beads, contours, chatterwork, base, a pen, and a letter opener, and a bookmark. displays many variations. and captive rings. These are small projects that Each project is covered completely, Size: 8 1/2" x 11" • 290 color photos • 80 pp. are big on fun and ﬂ air. Size: 8 1/2" x 11" • 250 color photos • 64 pp. ISBN: 978-0-7643-3131-2 • soft cover • $16.99 Size: 8 1/2" x 11" • 270 color photos • 64 pp. ISBN: 0-88740-675-0 • soft cover • $12.95 ISBN: 0-7643-1462-9 • soft cover • $14.95 Turning Boxes with Friction-Fitted Lids.
[Show full text]
West Bay Forest Products— Preferred Cedar Manufacturer
Page 58 Advertorial Wholesale/Wholesale Distributor Special Buying Issue FILLER KING® Continues To WEST BAY FOREST PRODUCTS— Serve As An Industry Leader PREFERRED CEDAR MANUFACTURER Homedale, Idaho—Since 1988, FILLER tions. Selling both grades enables us to KING®, located here, has built a sterling give builders exactly what they need in reputation as a manufacturer of custom, every design and cost situation instead of stock and I-Joist Compatible (IJC) glulam trying to do two very different jobs with one beams and laminated roof decking, as well product,” she added. as a provider of high quality customer serv- According to Vitek, the defining differ- ences in usage between Framing Grade and Appearance Grade are as follows: Framing Grade: These applications will be hidden from view West Bay Forest Products maintain a 6-acre property stocking up to 4 million feet of Cedar and 74,000 square when the structure is feet of completely indoor manufacturing. completed and the company follows indus- “PREFERRED CEDAR Brand” Cedar The plant also operates with 100 per- try standard with strong cent plastic chains to minimize any 3-1/2-inch and 5-1/2- products celebrates its 1st year anniversary this year at the annual occurrence of iron stain. According to inch framing grade company President Don Dorazio; “We products. “When itʼs NAWLA conference. Since its launch going to be covered up in Las Vegas, the “PREFERRED offer finishing that is second to none so appearance doesnʼt CEDAR Brand” has enjoyed excep- with extensive packaging and value- matter, builders should- tional penetration into all North added options that provide customers nʼt pay a cent more American Cedar markets.
[Show full text]
Harvesting the Small Forest
237 HARVESTING THE SMALL FOREST ARTHUR M. SOWDER Harvesting the woodland crop^ or periods, equal to 5 percent of the work- loggings is the last stage in the pro- day. duction of the crop. It is like the final Before he starts his tree harvest, the step in producing potatoes or doing owner should know the outlets for the farm chores, such as milking. A farmer crop. If they are to be marketed, the does not sell his potatoes while they products should be contracted for by are in the ground or the milk while it written agreement. It is worth while to is in the cow. By doing his own harvest- inquire about the products in demand, ing or chores, he is selling his services. and study the logging of those products In the South, for instance, about as to quantity and quality, with the one-half the value of some harvested equipment available. Also, before start- forest products, such as sawlogs, is rep- ing, it is well to mark the trees to be resented by the standing tree—hence cut with paint, crayon, or lime spots. one-half comes about through logging In marking, the owner should bear in and hauling. In other words, harvest- mind that it usually costs more per ing doubles the sawlog returns from cord or per thousand board feet to log the woodlands. small trees than it does large ones, but Owners of small woods who do their in time the owner will learn which are own logging are apt to practice good the profitable tree sizes and species and forestry.
[Show full text]
A Nebraska Log Cabin
University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Publications, etc. -- Nebraska Forest Service Nebraska Forest Service 2004 A Nebraska Log Cabin Marvin Liewer Colorado State University Follow this and additional works at: https://digitalcommons.unl.edu/nebforestpubs Part of the Forest Sciences Commons Liewer, Marvin, "A Nebraska Log Cabin" (2004). Publications, etc. -- Nebraska Forest Service. 14. https://digitalcommons.unl.edu/nebforestpubs/14 This Article is brought to you for free and open access by the Nebraska Forest Service at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Publications, etc. -- Nebraska Forest Service by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. A Nebraska Log Cabin by Marvin Liewer [ 2004 ] Preface Nebraska pioneers built their homes with materials that were locally available. The prairie often dictated the use of sod. However, logs were generally used when trees were available. Today, logs are used in construction of country homes, vacation cabins, and hunting lodges despite modern construction materials. Log construction is aesthetically pleasing and energy efficient. In 1994, I began building a log cabin along the Niobrara River near Butte, Nebraska. My goal was to build an attractive, comfortable cabin using local wood products. I used ponderosa pine logs for the walls. Bur oak and green ash lumber was used for window and door trim. Stair and porch railings were constructed from hand-peeled eastern redcedar poles. Redcedar boards were also used for paneling the basement. The purpose of this report is to describe local wood products and specific constructions tech- niques used in my successful log cabin project.
[Show full text]
Handtools for Trail Work Forest Service
United States In cooperation Department of with Agriculture Handtools for Trail Work Forest Service Technology & 2005 Edition Development Program 2300 Recreation February 2005 0523–2810P–MTDC You can order a copy of this document using the order form on the FHWA’s Recreational Trails Program Web site Notice at <http://www.fhwa.dot.gov/environment/rectrails/trailpub .htm>. This document was produced in cooperation with the Recreational Trails Program of the U.S. Department of Fill out the order form and submit it electronically. Transportation’s Federal Highway Administration in the interest of information exchange. The U.S. Government Or you may email your request to: assumes no liability for the use of information contained in [email protected] this document. Or mail your request to: The U.S. Government does not endorse products or manu- Szanca Solutions/FHWA PDC facturers. Trademarks or manufacturers’ names appear in 13710 Dunnnings Highway this report only because they are considered essential to Claysburg, PA 16625 the objective of this document. Fax: 814–239–2156 The contents of this report reflect the views of the authors, Produced by: who are responsible for the facts and accuracy of the data USDA Forest Service, MTDC presented herein. The contents do not necessarily reflect 5785 Hwy. 10 West the official policy of the U.S. Department of Transportation. Missoula, MT 59808-9361 This report does not constitute a standard, specification, or Phone: 406–329–3978 regulation. Fax: 406–329–3719 Email: [email protected] Web site: http://www.fs.fed.us/eng/pubs —Cover photo: The 1924 Trail Gang in the Flume, Courtesy of the Appalachian Mountain Club.
[Show full text]
Reservation Narrow Gauge
BlLES - COLEMAN LUMBER COMPANY'S RESERVATION NARROW GAUGE The Last Northwest/Washington State Narrow Gauge Logging Rai I road 1921 - 1948 ..... With a Supplement on the DIAMOND MATCH COMPANY PRIEST LAKE RAILROAD The West '8 Most Modern Narrow Gauge Loggi ng Rail road BY JOHN E. LEWI S l ~~'t1.0N NARRO~ ~i>~ Q~b: ~i> A Chronicle Of ~~ BILES-COLEMAN LUMBER COMPANY'S NARROW GAUGE OA... " ..~4l( t\O~ ()Jo,,-, CREEK Rl\1.~\~f.") at 4RROW SHORtt The LAST NARROW GAUGE LOGGING RAILROAD In Washington State First Edition THI SIS OF 2500 BOOK NO. PRINTED By JOHN E. LEWIS © 1980 by John Edward Lewis All rights reserved, including those to reproduce this book, or parts thereof in any form without permission in writing from the publisher. FIRST EDITION Library of Congress Catalog Card Number: 80-80621 PUBLISHER'S NOTE ... Scale equipment drawings used in this book are based upon actual manu facturer's erection drawings (log cars, speeder, Shay, and 2-6-6-2), equipment of the same size, class and approximate year of construction (Heisler), or actual equip me.nt item (log loader) . Any corrections/ additions forwarded by readers will be gratefully accepted by the authol·. Although it seems certain that color photos of the Biles-Coleman line or its equipmellt were taken by some of the thousands of workers engaged in building the nearby Grand Coulee Dam Project, a search over the years has failed to locate any such photos of this type. If forwarded to the author, together with other per tinent corrections/ additions will be included in a revised second edition should de mand warrant.
[Show full text]
Chapter 05—Types of Axes and Related Tools
11 Chapter 5—Types of Axes and Related Tools Single-Bit Axes he European single-bit ax evolved into the Ameri- European cutting edge to the shorter, wider American Tcan single-bit ax with the addition of the poll. By cutting edge increased the accuracy and durability of adding weight to the back of the ax head, the poll pro- the tool. The poll and wider cutting edge of the Ameri- vided better balance and increased the striking force can single-bit ax (figure 5–1) increased its cutting effi- of the ax. The additional change from the long, narrow ciency and made it the new standard. Common Single-Bit Axe Head Patterns OR NATIONAL Figure 5–1—Common single-bit ax head patterns. Refer to “Appendix A—Full-Page Ax Illustrations” for a larger version of this illustration. Produced by: U.S. Department of Agriculture • Forest Service • National Technology and Development Program • Missoula, MT • 1623–2M04–MTDC Chapter 5—Types of Axes and Related Tools 12 The poll also created a flat striking surface on the One exception is the rafting-pattern ax (figure 5–3). In back side of the ax head, providing the user with a the past, logs held together with steel cables and pounding or driving tool as well as a cutting tool. chains formed rafts that loggers floated downstream Keep in mind that, even today, the poll typically is not to the sawmill. The hardened poll on the back of a hardened steel and you should not use it to strike rafting-pattern ax allowed the loggers to drive metal another piece of steel, such as a metal splitting fasteners to secure the cables and chains without wedge.
[Show full text]
MICHIGAN LOG MARKS" the R~C, Viiaj ~ Eoituftuj $~ Oj A1~'4
~ , /~~;~:r~~ / /\ J ,Mla.H-I SA,N _ .. _._l.-,~_.~ ... _-.;- -~;': -..,,-') , ..\ __ \. \ . x~ '-~C~(·~~ M'A1\~,5 • '- ,,/::\..,• .... -f-.--=::.;...--( /" ..-< '>< ., ,\\ ' /' "'_ .. , >L~._j __ -'\---\- .........; ,/' '., '. '¥' \0 :::-- \ -\ ",,,," ~. I ,. / i----- ~_ ~1/ . / I \. '\ " \ \ i ~ . ~ \\ (~i ~ ~ : l ~\ " " \ !: ~ J , Issued November 194 I; First Reprinting, January 1942 \ __ ... - ~ ~ "~. • ~ I ~ .. :. ,:'-,J." . .. ... ~- - .. _. FOREWORD MICHIGAN'S early history and development, as well as that of adjacent states, was influenced materially by the industry that utilized the timber resources of the state. Much of' the wealth in the forest was extracted quickly by the lumber industry, supplying work to the pioneer, in addition to capital and building material to develop farms and villages. Log marks were an essential part of that lum ber industry. They were the outposts of law and order in pioneering communities where social controls were often weak. Stamped on a log, they carri~d the inviolate right of ownership of property on every stream and pond in north ern Michigan. Michigan has harvested most of its virgin timber crop, but it will not be many years, as ~ measured in the life of a state, before logging .t:~ and milling again will be a common sight and ~ an important part of the state's economy. While ~ the log mark will never return to occupy the ~ important role it once did, it undoubtedly will ~ -c: always be called upon in various ways to iden ~ tify raw forest products. A permanent record of log marks and of the industry that uses them is highly desirable. Hence, Michigan State College gladly accepted sponsorship of the WPA Writers' Project for this state-wide study and herewith publishes the results.
[Show full text]
Memorial to Ira Ayer 1802-1889
Memorial to Ira Ayer 1802-1889 And A History of Company A of the 116th Regiment of the New York Volunteer Infantry LeRoy S. Oatman 1890 Published by Bill Scholtz http://scholtz.org March 2, 2010 Contents Contents Transcribed Memorial ..................................................................................................... 1 ADDRESS....................................................................................................... 4 Early History ........................................................................................................... 4 Patriot War .............................................................................................................. 8 Record of Ira Ayer Jr. .............................................................................................. 9 War of the Rebellion ................................................................................................ 9 Closing Years of Life............................................................................................. 14 LETTER FROM IRA AYER JR. ............................................... 18 Scanned Memorial......................................................................................................... 20 Exercises and Resolutions ......................................................................................... 23 Address ..................................................................................................................... 27 Letter from Ira Ayer, Jr. ............................................................................................
[Show full text]
“Reading” Tool Marks on Furniture by Don Williams
“Reading” Tool Marks on Furniture by Don Williams he process of producing lumber from a tree to lates to timbering, or working with big pieces of wood. a log to a cabinetmaker or joiner always leaves Sawing is cutting up pieces of wood with a saw, and is Tphysical evidence you can “read” from the more frequently referred to as lumbering. Secondly, it is surfaces of the lumber. As observers and caretakers of critical to identify the technology in question as being artifacts fashioned from these materials, it is vital for us human powered and controlled or machine powered to understand those marks so that we can consciously and controlled. In a pre-robotic age, while each tries study the creative processes and preserve their physi- to mimic the other, neither can fully succeed. That is cal evidence. There are three historical principles that our ace in the hole. explain this transformation from raw material to an intermediate usable form, and the attendant technologi- Hewing After the tree is felled by a felling axe or sawn down cal evidence. The first is the desire to most efficiently with something like a two-man timber saw, and re- extract a maximum amount of semi-finished material moved from the forest, the process of preparing the for the cabinetmaker from a finite raw material source, wood begins. In true hewing, the outside of the log is namely a log. The second is that cutting big pieces into cleaned up with peeling and cutting tools. This may be little pieces makes them easier to move and handle.
[Show full text]