sign in sign up
<<
Home , Ogee, Particle board

MDF Ultralight MDF (MUL) & Light Density LDF MDF Moulding for -grade and architectural millwork Ultralight & Light Density Mouldings

Ultralight MDF and Light Density LDF are paint grade products that provide won- AN IMPORTANT NOTE ABOUT MDF derful architectural profiles at amazingly affordable prices. products or wood by-products, such as LDF & Ultralight MDF, can expand and Our Ultralight MDF, identified as MUL, is an ul- tra lightweight density fiberboard imported from contract depending on climate conditions. Chile, and are produced from sustainable management. MUL is not harvested from natural IT IS CRITICAL TO ACCLIMATE ALL forests, nor does its fiber come from genetical- PRODUCTS PRIOR TO INSTALLATION. ly modified or old-growth . The wood fibers, combined with , produce a product weighing It is imperative to glue all straight and similar to . While typical MDF mouldings are corner joints, as well as running a of much heavier in weight and, when installed, can glue along installed straight pieces. pucker around nails, MUL mouldings more like pine mouldings. The combination of lighter weight and better nailing makes MUL mouldings an ideal choice. WARNING: Products listed in this publication can expose you to wood dust, a chemical known to the State of California to cause With costs less than finger joint pine, MUL and cancer. , sawing, sanding, or machining wood products Light Density LDF are pre-primed, have no joints, can produce wood dust. Avoid inhaling wood dust, or use a dust will not crack, split, twist or warp and never have mask or other safeguards, for personal protection. For more information, go to www.P65Warnings.ca.gov/wood. raised or inconsistent grain. Produced - tically, LDF has helped in replacing finger joint pine as the only reasonably priced paint grade product of choice. MUL and Light Density LDF are the mouldings of choice for multi-million dollar homes, as well as entry to high-end tract housing. They are ideal for any home or office to improve on typical mouldings without adding increased costs. ©2020 EL & EL Wood Products Corp. All rights reserved. 20011001 2.20 25K ▲ = NorCal (N) P = Crown Projection NEW NEW ITEM: Distributed by: KEY: ▼ = SoCal (S) D = Crown Drop New for 2020 MUL = Ultralight MDF MS = Melamine Shelving (Ultralight Fiberboard) MD = Melamine Divider MDF = Unprimed MDF PB_ = Plinth Block LDF = Lightweight MDF (Light Density Fiberboard) BB = Base Block _PB = ROS = Rosette FB = Fiberboard M PRE-MITERED CASING: ELandELWoodProducts.com Available in 7' mitered pairs or sets

Streamline Reversible #711 Base #356 Base #711 Base Coronado/ Scant Colonial/ Sierra Base Monterey/ #366 Base Santa Fe/ Santa Clara/ Colonial Streamline/ Base Base 3/8 x 2-1/2 1/2 x 2-1/2 1/2 x 3 #623 Base Coronado/ #356 Base 9/16 x 3-1/4 Sonoma 9/16 x 3-1/4 #175 Base Crescent Base/Casing Bullnose 3/8 x 2-1/4 3/8 x 2-1/4 1/2 x 3-1/4 #623 Base 1/2 x 3-1/4 Base 9/16 x 3-1/2 Base 9/16 x 3-1/2 Base 310MUL N/S 319MUL S 311LDF3N S 351MUL N/S 366MUL S 1/2 x 3-1/4 9/16 x 3-1/4 9/16 x 3-1/2 9/16 x 3-1/2 304MUL N/S R304MUL2 N/S 7/16 x 2-1/2 314MUL3SC S 320MUL N/S 338MUL3 N/S 118MUL3 S 9/16 x 3-1/4 314BMUL3SC N 361MUL3 N/S 339MUL N/S 307MUL N/S 310BMUL S 314MUL3 N/S ELandELWoodProducts.com

#711 Base 3-Step Base Monterey 1 Eased Mission/ Cape Cod Victorian/ Cape Cod S3S Base 3-Step Base #711 Base Coronado/ Santa Solano Imperial/ Santa Fe/ 3/8 x 3-1/2 1/2 x 3-1/2 Base Edge Hermosa Base Newport Base 1/2 x 4 NEW 1/2 x 4-1/8 7/16 x #620 Base Clara/ Base/ #175 Base #175 Base 7/16 x 3-1/2 Craftsman Base 7/16 x 3-7/8 Base 9/16 x 4 9/16 x 4-1/4 Crescent Casing 9/16 x 4-1/2 9/16 x 4-1/2 311MUL N/S 321MUL3 N/S 743MUL4 N/S 321MUL4 N/S 4-3/16 Base 9/16 x 3-3/4 9/16 x 3-7/8 Base 9/16 x 4-1/4 7/16 x 3-1/2 335MUL S 313MUL S 318MUL4 N/S 311MUL4 S 314MUL4 N/S 325MUL N/S 338MUL4 N/S 7/16 x 3-1/2 9/16 x 4-1/4 362MUL4 N 311BMUL S 324MUL N/S 329MUL N/S 311LDF4 S 387MUL3 N/S 326MUL N/S Ultralight MDF Mouldings

1 Eased Edge Del Mar/New Meridian Monterey/ S4S Mission/ Victorian/ Intrada Coronado/ Crescent Cape Cod Base ”B” Cape Del Mar/ Vintage/ Victorian/ Craftsman Hampshire Base Sonoma Notched Hermosa Newport Base #618 Base Base 9/16 x 5-1/4 Cod Base New Colonial Newport Base Base 9/16 x 4-1/4 Base Modern Base Base 9/16 x 5 1/2 x 5-1/4 9/16 x 5-1/4 9/16 x 5-1/4 Hampshire Base Base 1/2 x 4-1/2 Base 318MUL5 N/S Base 9/16 x 4-1/2 349MUL4 N/S 9/16 x 4-1/2 9/16 x 5 9/16 x 5 314MUL5SC N 317MUL S 318BMUL S 9/16 x 5-1/4 9/16 x 5-1/4 9/16 x 4-1/2 390MUL N/S 387MUL4 N/S 327MUL4 N/S 361MUL4 N/S 323MUL N/S 330MUL S 9/16 x 5-1/4 9/16 x 5-1/4 328MUL5 N/S 330BMUL N/S 392MUL4 N/S 314MUL5 N/S 327MUL5 N/S

Monterey Meridian Georgian Sierra Base Harris Base Monterey/ Solano Base Crescent/ #566 Base Contemporary Santa Fe/ Classic 1 Eased Bullnose S4S Base Base Base 1/2 x 5-1/4 9/16 x 5-1/4 Sonoma 9/16 x 5-1/4 Lancaster 9/16 x 5-1/4 Base #175 Base Beaded Edge Base Notched 9/16 x 5-1/4 9/16 x 5-1/4 9/16 x 5-1/4 Base Base 1/2 x 5-1/4 9/16 x 5-1/4 Base Craftsman 9/16 x 5-1/2 Modern 352MULSC N 355MUL N/S 362MUL5 N 368MUL S N/S 9/16 x 5-1/4 5/8 x 5-1/4 338MUL5 N/S 9/16 x 5-7/16 Base Base 341MUL S 349MUL5 350MUL N/S 9/16 x 5-1/4 Colonial 372MUL5 N/S 354MUL N/S 361MUL5 N/S 359MUL N/S 1/2 x 5-1/2 9/16 x 5-1/2 Base 365MUL S 352MUL N/S 387MUL5 N/S 392MUL5 N/S 9/16 x 5-1/4 118MUL5 S BASEBOARD

Santa S3S Base Imperial/ Carolina/ Tuscany Vintage/ Savannah/ Savannah/ Plinth Base Solano/ Coronado/ Mission Malibu/ Imperial/ Laguna Santa Clara/ 1/2 x 6 NEW #175 Base Palisade Base Colonial Vermont Vermont 11/16 x 6-1/2 Colonial #613 Base Bay Base Hermosa #175 Base Base Clara/

ELandELWoodProducts.com Crescent 5/8 x 6 Base 11/16 x 6 Base Base Base (Thin Base 9/16 x 7-1/4 9/16 x 7-1/4 Base 5/8 x 7-1/4 9/16 x 7-1/4 Crescent Base 743MUL6 S Version) 389MUL N/S Base 342MUL6 N/S 5/8 x 6 375MUL N/S 9/16 x 6-1/8 3/4 x 6-1/2 9/16 x 7-1/4 314MUL7 N/S 333MUL N/S 9/16 x 7-1/4 342MUL7 N/S 343MUL S 11/16 x 5-3/4 385MUL N/S 328MUL6 N/S 334MUL S 9/16 x 6-1/2 118MUL7 S 340MUL N/S 5/8 x 7-1/4 332MUL N/S 334BMUL N/S 345MUL N/S Ultralight MDF Mouldings

Meridian Sierra Base Bullnose Classic Monterey/ Contemporary 1 Eased Savannah Victorian/ Imperial/ Savannah Camden Williamsburg Santa Fe/ Monterey/ Base 9/16 x 7-1/4 Base Beaded Sonoma Base Edge Base Newport #175 Base Base Base Base #175 Base Sonoma 9/16 x 7-3/8 9/16 x 7-1/4 Base Base 1/2 x 7-1/4 Craftsman 1 x 7-3/8 Base 5/8 x 8-1/4 1 x 8-1/2 1 x 8-1/2 1 x 8-1/2 9/16 x 9-1/4 Base 353MUL N/S Base 9/16 x 8 349MUL7 N/S 358MUL N/S 9/16 x 7-1/4 9/16 x 7-1/4 372MUL7 N/S 379MUL S 342MUL8 N/S 380MUL S 381MUL S 382MUL S 338MUL9 N/S 9/16 x 9-1/4 1/2 x 7-1/4 360MUL N/S 361MUL7 N/S 331MUL N/S 361MUL9 N/S 387MUL7 N/S T&G WAINSCOT, CAP & BASE S4S & CAP Beaded T&G Wainscot 3/8 x 3-1/2 2000LDF N/S Beaded T&G Wainscot 3/8 x 5-1/2 1/4 x 7 3/8 x 7-1/4 Primed S4S 2 Eased Edge Wall Cap 2002LDF N/S 2005MUL S 2005LDF N 11/16 x 1-1/2 713MUL N/S 713LDF N/S 11/16 x 1-1/2 1098MUL S 1098LDF N/S 11/16 x 2-1/2 N/S N/S 11/16 x 2-1/2 S N/S Flat T&G Wainscot 714MUL 714LDF 1099MUL 1099LDF 11/16 x 3-1/2 715MUL N/S 715LDF N/S 11/16 x 3-1/2 1100MUL S 1100LDF N/S 3/8 x 3-1/2 Wainscot Cap Wainscot 11/16 x 4-1/2 — — 718LDF S 11/16 x 5-1/2 1101MUL S 1101LDF N/S 2001LDF N/S with 3/8” Rab’t Base 11/16 x 5-1/2 750MUL N/S 750LDF N/S 11/16 x 6-1/2 1105MUL S 1105LDF S 3/8 x 5-1/2 9/16 x 2-1/4 with 3/8” Rab’t 5/8 x 6 5/8 x 8 11/16 x 7-1/4 751MUL N/S 751LDF N/S 11/16 x 7-1/4 1103MUL S 1103LDF N/S 2003LDF N/S 1/2 x 3-1/4 2010LDF N/S 2011LDF N/S 729LDF S 11/16 x 9-1/4 752MUL N/S 752LDF S 11/16 x 11-1/4 — — 1106LDF N/S 735MUL N/S Reversible V-/ 11/16 x 11-1/4 753MUL N/S 753LDF N/S 1-1/16 x 3-1/2 1108MUL S 1108LDF N/S Nickel Gap T&G Wainscot 1-1/4 x 5-1/2 — — 1102LDF S 5/8 x 5-1/2 Wainscot Base 1-1/4 x 7-1/4 — — 1104LDF N/S 2007LDF N/S Reversible Single/Double Nickel Gap T&G Wainscot with 3/8” Rab’t 1-1/4 x 11-1/4 — — 1107LDF N/S 5/8 x 7-3/8 5/8 x 7-3/8 1/2 x 5 2008LDF N/S 2009LDF N/S 736MUL N/S CASING ELandELWoodProducts.com

Beveled/ #711 Casing Moulded Clamshell Beveled/ 2 Round Edge Monterey/ Classic Beaded Meridian Casing Colonial/#356 Reversible #366 Casing Streamline 9/16 x 1-5/8 Casing Casing Streamline Casing Colorado Casing Casing 11/16 x 2-1/4 Casing 4-Flute & Reed 5/8 x 2-1/4 Casing 5/8 x 1-5/8 9/16 x 2 Casing 9/16 x 2-1/4 9/16 x 2-1/4 11/16 x 2-1/4 5/8 x 2-1/4 Casing S 107MUL N/S 149MUL2 N/S 162MUL2 9/16 x 1-9/16 152MUL N/S 9/16 x 2-1/4 130MUL N/S 121MUL S 9/16 x 2-1/4 120MUL N/S 135MUL2 N/S 146MUL2 N/S N/S 102MUL N/S 103MUL N/S 11/16 x 2-1/4 158MUL2 152BMUL N/S

Contemporary Tucson Casing Clamshell Casing Peoria Casing Carolina/ Santa Fe/#275 Howe Casing #711 Casing Mission/ 3-Step Casing Riviera Casing Casing 11/16 x 2-1/4 9/16 x 2-1/4 9/16 x 2-1/4 Palisade Casing Casing 11/16 x 2-7/16 5/8 x 2-1/2 Bel-Air Casing 5/8 x 2-1/2 5/8 x 2-1/2 11/16 x 2-1/4 11/16 x 2-7/16 11/16 x 2-7/16 11/16 x 2-1/2 194MUL S 195MUL S 196MUL S 178MUL N/S 108MUL N/S 110MUL N/S 131MUL N/S 172MUL2 N/S 132MUL N/S 167MUL N/S 128MUL N/S

Bay Shore/ Carmel Casing Mackenzie Casing Cape Cod Casing Bel-Air/Coronado Lancaster/ Bell Court Casing Santa Clara/ Victorian/ S4S Notched Bayport Casing 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 Casing Hermosa Casing 1-3/16 x 2-1/2 Crescent Casing Tudor Casing Modern Casing 5/8 x 2-1/2 1-3/16 x 2-1/2 1 x 2-1/2 3/4 x 2-5/8 11/16 x 2-1/2 11/16 x 2-1/2 137MUL N/S 138MUL N/S 150MUL N/S 164MUL S 134MUL N/S 157MUL N/S 159MUL N/S 168MUL N/S 169MUL N/S 197MUL N/S

Ogee Casing Malibu Casing 2 Round Edge Casing Solano/Colonial Victorian/ Del Mar/New Monterey/ Santa Fe/#275 Casing Colonial/#356 Casing 11/16 x 2-1/2 1 x 2-9/16 9/16 x 2-3/4 Casing Newport Casing Hampshire Casing Colorado Casing 11/16 x 3 5/8 x 3-1/8 11/16 x 2-7/8 11/16 x 2-7/8 5/8 x 3 11/16 x 3 198MUL N/S 181MUL S 122MULSC N/S 165MUL N/S 176LDF N 3/4 x 2-3/4 119MUL N/S 125MUL N/S 127MUL N/S 135MUL3SC S 9/16 x 3-1/4 122MUL N/S 176MULSC S 11/16 x 3-1/4 176MUL N/S

Mission/Bel-Air Casing Monterey/ 4-Flute Casing Lancaster/ Cambridge Casing #366 Casing Victorian/Tudor Casing Carmel Casing 3/4 x 3-1/4 Colorado Casing 9/16 x 3-1/4 Hermosa Casing 11/16 x 3-1/4 5/8 x 3-1/4 1 x 3-1/4 5/8 x 3-1/4 11/16 x 3-1/4 1-3/16 x 3-1/4 129MUL N/S 154MUL S 161MUL S 162MUL3 S 170MUL N/S 184MUL N/S 135MUL3 N/S 160MUL N/S

49er Casing Malibu Casing Belmont/Crescent Carolina/Palisade Reversible 5-Flute 2 Round Edge Casing Santa Fe/#275 Casing Classic Beaded Casing 1 x 3-1/4 1-3/16 x 3-3/8 Casing Casing & Reed Casing 9/16 x 3-1/4 1 x 3-1/2 7/8 x 3-7/16 11/16 x 3-1/2 11/16 x 3-1/4 9/16 x 3-3/8 186MUL N/S 180MUL N/S 139MULSC N/S 166MUL N/S 146MUL3 N/S 126MULSC S 133MUL N/S 158MUL3 N/S 11/16 x 3-1/4 139MUL N/S

Meridian Casing Shasta Casing Belmont/Crescent Casing Savannah Casing Cape Cod Casing Contemporary Casing Colonial Base/Casing Crescent Casing 7/8 x 3-7/16 7/8 x 3-1/2 1 x 3-1/2 1-3/16 x 3-1/2 11/16 x 3-1/2 11/16 x 3-1/2 9/16 x 3-1/2 1-3/16 x 3-1/2 149MUL3 N/S 156MUL N/S 126MUL N/S 147MUL S 155MUL N/S 172MUL3 N/S 118MUL3 S 173MUL S CASING ELandELWoodProducts.com

Howe Casing Shasta Casing Bel-Air Casing Chandler Casing Intrada Casing Georgian Casing Sierra/Tuscany Casing Bullhead Casing 1 x 3-1/2 11/16 x 3-1/2 1-3/16 x 3-1/2 15/16 x 3-1/4 11/16 x 3 11/16 x 3-9/16 7/8 x 3-3/4 11/16 x 4 177MUL N/S 179MUL N/S 189MUL N/S 191MUL S 192MUL N/S 183MUL N/S 175MUL N/S 193MUL S

Howe Casing Monterey/Colorado Casing Williamsburg Casing Classic Beaded Casing Malibu Casing Meridian Casing Reversible 6-Flute 1-1/8 x 4-1/8 13/16 x 4-1/4 1-3/16 x 4-1/4 7/8 x 4-1/4 1-3/16 x 4-1/4 7/8 x 4-1/4 & Reed Casing 11/16 x 4-1/4 174MUL N/S 136MUL N/S 143MUL S 146MUL4 N/S 148MUL S 149MUL4 N/S 158MUL4 N/S

Colonial Base/Casing Carolina Casing Boulder Casing Belvedere/Sedona Casing Tuscany Casing 2 Round Edge Craftsman Casing 9/16 x 4-1/4 1-3/16 x 4-1/4 11/16 x 4-1/2 1-3/16 x 4-1/2 7/8 x 4-1/4 3/4 x 4-1/2 118MUL4 S 185MUL N/S 187MUL N/S 190MUL N/S 140MUL N/S 145MUL N/S Solano Base/Casing 9/16 x 4-1/4 362MUL4 N PLINTH & BASE BLOCKS

Reversible 8-Flute & Reed Casing 1 Round Edge Craftsman Header Lintel Mould 9/16 x 5-1/2 1-1/16 x 5-1/2 1 x 4-1/2 158MUL5 S 144MUL N/S 998MUL N/S Wellington Cambridge Roseše Roseše Springfield Plain Springfield Roseše Plinth Block Plinth Block Base Block Base Block Base Block Colonial CHAIR RAIL with Edge Detail without Edge Detail with Edge Detail with Edge Detail without Edge Detail Base Block Wellington Roseše Springfield Base Block Roseše Base Block Plinth Block with Edge Detail with Edge Detail without Edge detail ROS160MDF 1 x 3-3/4 1BBMDF 3/4 x 3-1/4 x 6-1/2 40BBMDF 1 x 2-3/4 x 6 ROS162MDF 1 x 2-3/4 2BBMDF 3/4 x 3-1/2 x 6-1/2 41BBMDF 1 x 3-1/2 x 6 ROS164MDF 1 x 4-1/2 3BBMDF 3/4 x 2-1/2 x 5-3/4 ROS165MDF 1 x 5-1/2 4BBMDF 1-1/4 x 3-1/4 x 6-1/2 42BBMDF 1 x 3-3/4 x 6 ROS169MDF 1 x 3-1/2 5BBMDF 1-1/4 x 3-1/2 x 6-1/2 43BBMDF 1 x 4-1/2 x 8 ROS170MDF 3/4 x 2-1/2 35BBMDF 1 x 2-3/4 x 6 44BBMDF 1 x 5-1/2 x 8 ROS171MDF 3/4 x 3-1/4 36BBMDF 1 x 3-1/2 x 6 Colonial Base Block ROS172MDF 3/4 x 3-1/2 37BBMDF 1 x 3-3/4 x 6 Cambridge Roseše 38BBMDF 1 x 4-1/2 x 8 194BBMDF 1 x 2-3/4 x 6 Plinth Block without Edge Detail 39BBMDF 1 x 5-1/2 x 8 195BBMDF 1 x 3-1/2 x 6 PB20MDF 1 x 2-3/4 Plain Springfield 196BBMDF 1 x 3-3/4 x 6 PB21MDF 1 x 3-1/2 Chair Rail Colonial Bolection Bead & Barrel Colonial Malibu Traditional Base with Edge Detail 197BBMDF 1 x 4-1/2 x 6 9/16 x 2-1/2 Chair Rail Chair Rail Chair Rail Chair Rail Chair Rail Chair Rail PB22MDF 1 x 3-3/4 38BBMDFPL 1 x 4-1/2 x 8 PB23MDF 1 x 4-1/2 198BBMDF 1 x 5-1/2 x 6 651MUL N/S 9/16 x 2-5/8 1 x 3 3/4 x 3 11/16 x 3 1 x 3-1/2 5/8 x 4-1/2 PB24MDF 1 x 5-1/2 655MUL N/S 648MUL N/S 649MUL N/S 653MUL N/S 647MUL N/S 656MUL N/S PANEL CAP FLAT INTERIOR JAMBS Kerfing for bullnose is available on all jamb sizes and ASTRAGAL species. Custom size odd wall widths available upon request (all MDF jambs come 3/8”)

SIZE 6/8 8/0 17' LINEAL Specifications 11/16" Thick 4-9/16 4916MI6 4916MI8 4916MIL N/S 6/8 = 81" Below Dado 434MI6 434MI8 434MIL Contemporary Flat Astragal/ Flat Astragal/ 4-13/16 N/S 8/0 = 97" Below Dado Panel Cap Panel Cap Panel Cap Panel Cap Panel Cap Panel Cap Panel Mould Panel Mould 5-1/4 514MI6 514MI8 514MIL N/S Lineal - 17' = MDF with 1/4 x 11/16” Rab’t with 5/16 x 5/8” Rab’t with 1/4” x 1/2” Rab’t with 3/4" Rab't with 3/8” Rab’t with 5/8” Rab’t Dado depth = 3/8" 6-9/16 6916MI6 6916MI8 6916MIL N/S 1-1/16 x 1-5/16 1-1/8 x 1-3/4 3/4 x 2 1-3/16 x 2 1 x 2-1/2 1 x 2-1/2 11/16 x 1-3/4 11/16 x 1-5/8 Heads cut 3/4 over opening 7-1/4 714MI6 714MI8 714MIL N/S 739MUL N/S 738MUL N/S 737MUL N/S 733MUL N/S 734MUL N/S 740LDF N/S 646MUL N 660MUL S 5 pair per bundle CROWN ELandELWoodProducts.com

Pediment Corner Bed Mould Craftsman Crown Bed Mould Colonial Classic Colonial Pediment Single Beaded Colonial Contemporary Double Bead Crown Crown/Mould 9/16 x 1-7/8 Crown 9/16 x 2-7/16 9/16 x 2-1/2 Crown Pediment Crown Crown Crown Crown Crown Carolina 1-3/16 x 1-1/2 1 x 1-7/8 P: 1 ⁄” D: 1⁄” 9/16 x 2-3/8 P: 1 ⁄” D: 1 ⁄” P: 1 ⁄” D: 1⁄” 9/16 x 2-5/8 Crown 9/16 x 2-3/4 1-3/16 x 3 11/16 x 3-1/4 9/16 x 3-1/4 9/16 x 3-3/8 Crown 1-3/8 x 2-3/4 3/4 x 3-3/8 P: 1 ⁄ ” D: 1⁄” P: 1” D: 1⁄” 420MUL S P: 1 ⁄” D: 1 ⁄” 462MUL2 N/S 402MUL S P: 1 ⁄” D: 2” P: 1⁄” D: 2 ⁄ ” P: 1⁄” D: 3” P: 2” D: 2⁄” P: 2⁄” D: 2 ⁄” P: 2⁄ ” D: 2⁄ ” 438MUL N/S 419MUL N/S 460MUL2 N/S 404MUL S P: 1 ⁄” D: 2 ⁄” 436MUL N/S 439MUL N/S 441MUL N/S 405MUL S 444MUL3 N/S P: 2 ⁄” D: 2 ⁄” 440MUL N/S 421MUL N/S

Coronado/ Colonial Dentil Ready Cornice Crown Cornice Craftsman Tempe Small Colonial Coronado Coronado/ Savannah Contemporary Georgian Crown Crown 1-3/16 x 3-3/4 1-3/16 x 4-1/4 Crown Crown Charleston Crown Crown Georgian Crown Crown Crown 5/8 x 3-5/8 3/4 x 3-3/4 P: 2⁄” D: 2⁄” P: 3⁄” D: 2⁄” 11/16 x 4-1/4 3/4 x 4-1/4 Crown 9/16 x 4-1/4 7/8 x 4-1/4 Crown 9/16 x 4-1/2 1 x 4-1/2 9/16 x 3-7/16 9/16 x 4-1/4 9/16 x 4-1/2 P: 2⁄ ” D: 3⁄ ” P: 2⁄” D: 2 ⁄” 451MUL S 407MUL S P: 3” D: 3” P: 2⁄” D: 3” P: 3” D: 3⁄” P: 3” D: 3⁄” P: 3⁄” D: 3-⁄” P: 3⁄” D: 3⁄” P: 2⁄” D: 2⁄” 446MUL N/S 425MUL3 N/S 460MUL4 N/S 467MUL S P: 3⁄” D: 3” 406MUL N/S 434MUL N P: 3-⁄” D: 3-⁄” 422MUL S 444MUL4 N/S 426MUL N/S 410MUL4 N/S 412MUL N/S

Rancho Crown Ogee Crown Cornice Rafael Crown Single Beaded Double Bead Scošsdale King George Dentil Crown Charleston Rafael Crown Colonial Crown 3/4 x 4-1/2 3/4 x 4-9/16 1 x 4-5/8 3/4 x 4-5/8 Crown Carolina Crown Crown Crown 11/16 x 5-1/16 Crown 3/4 x 5-1/4 9/16 x 5-1/4 P: 3⁄” D: 3⁄” P: 3⁄” D: 3⁄” P: 3 ⁄” D: 3” P: 3⁄” D: 3⁄” 11/16 x 4-5/8 11/16 x 4-5/8 3/4 x 4-11/16 1-1/4 x 5 P: 3” D: 4⁄” 11/16 x 5 P: 3⁄ ” D: 3⁄ ” P: 3 ⁄” D: 3 ⁄” P: 3” D: 3⁄ ” P: 3⁄” D: 3⁄” P: 3⁄ ” D: 2⁄” P: 3⁄ ” D: 3⁄” P: 3 ⁄” D: 3⁄ ” 409MUL N/S 462MUL4 N/S 408MUL4 N/S 411MUL4 N/S 455LDF N/S 411MUL5 N/S 414MUL N/S 442MUL N/S 423BMUL N/S 469MUL S 465LDF5 S 410MUL5 N/S 7/8 x 4-5/8 P: 3⁄” D: 3⁄” 423MUL N/S

Colonial Crown Craftsman Crown Dentil Ready Contemporary Charleston Crown Nantucket/ Cornice Ogee Crown Regal Crown Rafael Crown Cape Cod Crown 9/16 x 5-1/4 3/4 x 5-1/4 Crown Crown 11/16 x 6 La Costa Crown 1 x 6 7/8 x 6 1 x 6-1/4 3/4 x 6-1/4 3/4 x 6-7/16 P: 3⁄” D: 4⁄” P: 3 ⁄” D: 3 ⁄” 13/16 x 5-1/2 1-1/8 x 5-5/8 P: 4⁄” D: 4” 1-3/16 x 6 P: 4⁄” D: 3⁄” P: 4⁄” D: 4⁄ ” P: 4⁄” D: 4⁄” P: 4⁄” D: 4⁄” P: 3⁄ ” D: 4⁄ ” 414LDF N 460MUL5 N/S P: 3⁄”, D: 4 ⁄” P: 4” D: 4” 410MUL6 N/S P: 3⁄” D: 5” 408MUL6 N/S 462MUL6 N/S 435MUL N/S 411MUL6 N/S 448MUL N/S 425MUL5 N/S 444MUL5 N/S 453MUL N/S CROWN

Colonial Crown Double Bead Coronado/ Single Beaded Coronado Del Mar Santa Clara King George Classic Crown Double Bead Colonial Crown 9/16 x 6-1/2 Carolina Crown Georgian Crown Crown Crown Crown Crown 11/16 x 7 Carolina 9/16 x 7-1/4 P: 4⁄” D: 4⁄” 1 x 6-1/2 Crown 7/8 x 6-9/16 7/8 x 6-9/16 1-3/16 x 6-3/4 13/16 x 6-7/8 1-1/4 x 7-1/4 P: 4⁄” D: 5⁄” Crown P: 5” D: 5⁄” 3/4 x 6-1/2 1 x 7-3/16 416MUL N/S P: 4⁄” D: 4⁄” P: 4 ⁄” D: 4⁄” P: 4⁄” D: 4⁄ ” P: 4 ⁄” D: 4 ⁄” P: 5⁄ ” D: 4 ⁄” P: 5⁄ ” D: 5 ⁄ ” 415MUL S 417MUL N/S 424MUL6 N/S P: 4⁄” D: 4 ⁄” 443MUL N/S 447MUL N 433MUL S 437MUL N/S 465LDF7 S P: 5⁄” D: 5⁄” 427MUL S 424LDF7 N 1-1/8 x 7-3/16 P: 5-⁄” D: 5-⁄” 424MUL7 N/S STOP &

1 Round 2 Round Colonial/ Edge Stop Edge Stop Ogee Stop 7/16 x 1-1/4 3/8 x 1-1/4 1/2 x 1-3/4 Contemporary Large Charleston Coronado/ Corona Crown Del Mar Colonial Coronado/ 201MUL N/S 202MUL N/S 210MUL N/S Crown Crown Georgian Crown 1-3/16 x 8-1/2 Crown Crown Georgian Crown 201LDF N 7/16 x 1-1/4 1-3/16 x 7-1/4 1 x 8 1-1/16 x 8 P: 6⁄” D: 5⁄” 1-3/16 x 8-1/2 11/16 x 8-7/8 1 x 11-1/4 204MUL N/S P: 8⁄” D: 7⁄” P: 5⁄” D: 5⁄” P: 5⁄” D: 5⁄” P: 5⁄” D: 5 ⁄” 432MUL N/S P: 6⁄” D: 6⁄” P: 6⁄” D: 6” 1/2 x 1-3/8 444MUL7 N/S 410MUL8 N/S 428MUL N/S 454MUL S 449MUL N/S 429MUL N/S 203MUL N/S SHELVING, STOOL, HOOK, CLEAT, DOUBLE CAP

Primed Double Ogee Cap Flat Edge Shelving Bullnose Edge Shelving 11/16 x 7-1/4 1 Eased Edge Cleat 11/16 x 11-1/4 11/16 x 23-1/4 3/4 x 11-1/4 11/16 x 11-1/4 5/8 x 11-1/4 3/4 x 11-1/4 996LDF N 9/16 x 1-1/2 11MDFF N 13MDFF S 11PBF N 11MDFBN N/S 11PB S 11PBBN N 10FB N/S 11/16 x 15-1/4 11/16 x 30-1/2 3/4 x 16 11/16 x 15-1/4 5/8 x 15-1/4 16PB S 16MDFF N 30MDFF N 16PBF N 12MDFBN S 12PB S 3/4 x 15-1/4 Raw Round Corner 3/4 x 24 16MDFBN N 5/8 x 23-1/4 16PBBN N with 3/4" Radius 24PBF N 11/16 x 23-1/4 13PB S 17PB S 3/4 x 1-13/16 x 8' 24MDFBN N/S 3/4 x 23-1/4 Primed Bullnose Stool Raw Bullnose Stool 1-3/16 x 8-1/4 1-1/4 x 8-1/4 8PBMDF N/S 24PBBN N N 18PB S PR995MUL 995LDF N Melamine Shelving MS1 5/8 x 11-1/4 S MS4 3/4 x 11-1/4 N (Available Lengths: 8’, 12’) MS2 5/8 x 15-3/4 S MS5 3/4 x 15-1/4 N (Available Lengths: 8’, 12’) Raw 1 Eased Edge Hookstrip MS3 5/8 x 23-1/4 S MS6 3/4 x 23-1/4 N (Available Lengths: 8’, 12’) 2 Eased Edge One Side Shelving 9/16 x 3-1/4 11/16 x 11-1/4 11/16 x 15-1/4 Raw Beveled Stool Raw Thick Beveled Stool 11/16 x 4-3/4 11/16 x 6-3/4 1 x 4-3/4 1 x 7-1/4 15FB N/S 11MDF2E S 12MDF2E S 986LDF S 987LDF S 976LDF N/S 977LDF N/S

All dividers are pre-drilled, all the way through. Melamine Pre-Drilled Dividers Holes are 3/16” diameter (+- 1/16”), spaced 1-1/4” apart. MD1 5/8 x 11-1/2 2 Sets of Holes S Ogee Window Stool Raw Ogee Window Stool 11/16 x 4-3/4 PR990MUL N PR990LDF N 11/16 x 4-3/4 990LDF N/S Melamine Hook 1 Edge Banded MD2 5/8 x 15-1/2 2 Sets of Holes S 11/16 x 5-1/4 N N 11/16 x 5-1/4 N 5/8 x 3-1/4 MD3 5/8 x 23-1/2 3 Sets of Holes S PR992MUL PR992LDF 992LDF 11/16 x 6-1/2 PR993MUL N PR993LDF N 11/16 x 6-1/2 993LDF N MLH N/S MD4 3/4 x 11-1/2 2 Sets of Holes N/S 11/16 x 7-1/4 N N 11/16 x 6-3/4 S MD5 3/4 x 15-1/2 2 Sets of Holes N/S PR994MUL PR994LDF 991LDF 1-3/16 x 8-1/4 N — 11/16 x 7-1/4 N MD6 3/4 x 23-1/2 3 Sets of Holes N/S PR999MUL — 994LDF 1-1/4 x 8-1/4 999LDF N Built-Up Mouldings

Built-ups allow you to combine Ceiling 324MUL multiple moulding profiles 433MUL to produce customized 423MUL looks that are easy to create 326MUL without the expense of a custom solution.

Built-up combinations for ceiling, door, and floor applications Casing can consist of a wide variety of arrangements. By using different combinations of Crown, Base, Casing, S4S, Chair Rail, and 713LDF 158MUL-2 502SP 604SP Panel Mold, you can make a PR163FJ 333P-4 more impressive statement with your moulding choices. Base

614SP 715LDF 314MUL-3 300ASP 308SP Working With Moulding

The right for the job Quality Miter Box Coping Position the moulding in the miter box as if the back of the miter box was the wall when cutting the miter. Trim at a 45° angle. The resulting cut Hammer 's Wood exposes the profile of the moulding, which serves Finishing Nails Glue as a guide line for the . Nail Set Following this profile with the coping saw at a right angle to the face of the moulding. This cut results in a duplication for the moulding pattern, which will then fit snugly against the face of the Estimating adjoining moulding. To estimate out how much moulding is needed, carefully measure the length of each wall where Fastening your moulding will be installed. Record the length Conventional hammer or finish nailer can be of each piece and round up to the next foot. Total used. A little glue and small diameter nails assure the footage needed and add 5 –10% overage for tight joints. If using a finishing nail gun, a setting cutting and trimming. of 100 to 110 PSI is advised to compensate for MDF's dense surface. Fill the holes with wood Mitering putty, sand to blend, and then paint. Most miter joints are 45° angles. The moulding is either placed flat on the bottom of the miter Painting box or against the back, depending on how the Factory primed mouldings permit the use of moulding is to be used. Each of the two mitered both water-based and solvent-based finish coat members are trimmed at opposite 45° angles. applications. Avoid using any catalyzed or When fitted together, the two pieces will form a . A second prime coat or scuff sanding 90° angle. For tight mitered joints, nail and glue, is optional. Apply the finish coats with brush, then the nails. roller or sprayer using flat, semi-gloss, enamel or ; whatever suits your room's style. Splicing It may be necessary to splice mouldings together Jigs along a wall. To do this, position the pieces in the Many projects require picture techniques miter box as if the back of the miter box was the of extreme accuracy. A is a framework in which wall. Miter the joining ends at a 45° angle. frames are made more rapidly and uniformly . The inside dimensions of the jig equal the outside This will allow one piece to overlap the other, dimensions of the frame. The jig consists of stock making a . Position the joint where the pieces nailed to any flat surface. Blocks two pieces can be nailed into a solid piece of can be used where necessary to straighten lumber, such as a stud, top plate or bottom plate. mouldings against the side of the jig. Gluing the joint will assure the joint stays closed. Matching Flexible Moulding is Available for Arched and Oval Windows & Curved and Ceilings. all the advantages of radiused wood at a fraction of the cost

superior lead-time tear resistant paints & stains beautifully match any profile minimal shrinkage custom profiles available incredible detail limited 5 year warranty manufactured on our premises

Benefits of using ValuFlex Manufacturing of ValuFlex • More flexibility, which creates less Flexible moulding is sold in straight and pre- stress when curved or bent formed pieces. Straight pieces are used for • Less stress means less chance of standard base, chair rail and jamb applications. cracking or splitting in the future Casing, crown and built-up applications require • Matches wood profiles better with less shrinkage pre-formed pieces. Pre-formed pieces are • Better definition of detail achieved by providing precise measurements, radius or a template. Pre-formed pieces only • Paints or stains beautifully have a variance of approx. 1˝ to 2˝, hence the • ValuFlex comes with a limited 5 year importance of precise information. Curved crown warranty against cracking or splitting applications, by far the most diverse, require a few simple rules of thumb (see Calculating General Information Radiussed Moulding below) to easily accomplish • Just about all of EL & EL profiles can a perfect fit without stressing the material. A be reproduced in flexible moulding. built-up is several pieces of mouldings put • ValuFlex has been formulated for a strong together, making a more dramatic application. tear strength and is recommended for all flexible moulding applications. Calculating Radiussed Moulding • The maximum length of flexible product The smallest inside radius a part can be is 12´ and the minimum length is 5´. made is three (3) times the profile's width. • All resin is sold by the whole foot only. Example: a 4½˝ wide crown’s smallest However, profiles such as 304, 310, 311, 314, radius is 4½˝ width x 3 = 13½˝ 329, and 330 are available in 50´ rolls. • Custom profiles are available and made to order.

No warranty on external use of ValuFlex. ValuFlex Flexible Moulding is custom manufactured on our premises. Straight flexible base is available for immediate delivery. Radiussed flex is available within 2-5 working days. Majestic Mantels by EL & EL are All shelves are available in 2' thru 6'

constructed using Poplar, Solid , and lengths, and in Nine (9) different styles. Integrated a more economical version constructed Custom lengths and special order Shelf Cleat of Ultralight MDF. The EL & EL style of options are available Wall ® Cleat shelves are easy DIY “flush mount”, with (check with your local dealer). Easy DIY a bottom projection of 3 ¼" inches. Mouting

Charleston Primed 4-⅜" Tall x 7-¼" Deep MAN413MUL Ultralight MDF Large Dentil 5-⅜" Tall x 7-¼" Deep MANCM73P Poplar MANCM73-O Oak

Large Charleston 6-⁹⁄₁₆" Tall x 9-¼" Deep MAN410MUL Ultralight MDF

Small Dentil 3-¹³⁄₁₆" Tall x 7-¼" Deep MANCM74P Poplar MANCM74-O Oak

Carolina 4-⁵⁄₁₆" Tall x 7-¼" Deep MAN423MUL Ultralight MDF

Georgian 4-⁹⁄₁₆" Tall x 7-¼" Deep Imperial 4-⅝" Tall x 7-¼" Deep MAN412MUL Ultralight MDF MAN810P Poplar MAN412P Poplar MAN412-O Oak

Acanthus Leaf Embossed/High Relief 5-⅛" Tall x 7-¼" Deep Embossed/High Relief 4-⅝" Tall x 7-¼" Deep MANCM83 Poplar MANCM8810 Poplar

Cover Image: MAN410MUL with MDF Surround & Wellington Pilaster Kit Also Available from EL & EL Wood Products

At EL & EL we pride ourselves Offering exclusive partnerships – Interior & Exterior on having the best selection of with many leading brands in Moulding & More (Pre-hanging Available) quality products available, in the industry, we back up all Ultralight MDF Mouldings & Boards Knotty Doors stock and ready to ship next our products with some of the day, so you don’t have to wait best guarantees in the market. Domestic MDF Mouldings & T&G ® Clear & Knotty Pine Doors for your order. Solid, Raw FJ & Primed FJ Pine Mouldings Primed MDF & Clear Pine Louver Doors

Masonite® Solid Core Doors Redwood & VG Mouldings

® White River™ Embossed & Masonite Moulded Panel Doors High Relief Mouldings Masonite® Fiberglass & Steel Exterior Doors (Pre-hanging & Pre-fi nishing available) Pakari™ Barnwood Simpson® Interior & Exterior Doors Mouldings (Cherry, , , Superior & Knotty Alder, Poplar, Oak, Walnut) Shaker Doors (Primed, VG Fir & Alder)

ValuFlex® Flexible Moulding Trimlite Decorative Glass (Manufactured at EL & EL) ™

Bodyguard® Protected Barn Doors (Knotty Alder, Knotty Pine & Primed MDF) Primed FJ Mouldings Barn Door Hardware Bodyguard® Protected Exterior (Rustic & Stainless Steel) Trimboard & CoxUSA™ Hardware Components MiraTEC® & Extira® Treated Exterior Composite Trim & Shutter Board Masonite® Architectural Doors Interior & Exterior Door Jambs & Frames (FJ & Solid Pine, Poplar, Engineered FG & VG Fir, RediFrame® & RediFlex® Steel Frames Oak, Cherry, Alder, Mahogany, Walnut, Composite)

Weatherstrip, Flashing & Shims Dormakaba™ Hollow Metal Doors & Frames Lites & Louvers Columns & Accessories

HB&G™ Columns & Porch Systems

® Fypon® Polyurethane Beams & Accessories Accessories (Plinth Blocks, Rosettes, Base Corners, )

Majestic Mantels® (Assembled at EL & EL) Pre-Built Shelves, Surrounds & Pilaster Kits TM Pocket Door Frames (Assembled at EL & EL) Door Company ARCHITECTURAL Closet Material (Shelving, Brackets, Poles, ) Unparalleled Service Next Day Delivery Innovative Selection Easy Ordering