DOCSLIB.ORG

Plywood, Mdf, Particle Board, Melamine, Lumber

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plywood, Mdf, Particle Board, Melamine, Lumber PLYWOOD, MDF, PARTICLE BOARD, MELAMINE, LUMBER, & MOULDING STK # ALDER STK # BEECH PALD142 1/4 ALDER A2 CLEAR (DOMESTIC) PBEE14 1/4 BEECH A4 PS 1SG (DOM) PALD14CD 1/4 C4 1" KNOTTY ALDER (DOM) PBEE34A 3/4 BEECH A1 PS (DOM) PALD34D 3/4 A1 PS CLEAR ALDER (DOM) PALD34CD 3/4 C4 1" KNOTTY ALDER (DOM) STK # HICKORY STK # ASH PHIC14D 1/4 4X8 HICKORY B2 PS (DOM) PASH14C 1/4 C2 PS WHITE ASH 2SG (DOM) PHIC34 3/4 4X8 HICKORY A1 (DOM) PASH34 3/4 A1 WPF WHITE ASH (DOM) STK # BIRCH STK # CHERRY PBIR1848 1/8 BIRCH A4 1SG PCHY14D 1/4 CHERRY B2 VC PS (DOM) PBIR14BD 1/4 BEADED WHITE BIRCH PCHY34AD 3/4 CHERRY A1 VC PS (DOM) PBIR1448 1/4 BIRCH A4 NATURAL 1SG PCHY34MDF 3/4 CHERRY A1 MDF PS (DOM) PBIR142S 1/4 BIRCH B2 2SG IMPORT PBIR14 1/4 C2 WHITE BIRCH WPF (DOM) PBIR142S 1/4 CE BIRCH (IMPORT) STK # AROM. CEDAR PBIR1248 1/2 BIRCH C2 NATURAL VC IMP PCED14 1/4 AROM. CEDAR A4 PS DOM (VC) PBIR12W 1/2 BIRCH C2 WHITE (DOMESTIC) PBIR34A 3/4 A1 NAT BIRCH (DOM) STK # MAHOGANY PBIR3448S 3/4 BIRCH A1 STAIN VC (DOM) PAFR14MDF 1/4 AFR MAHGNY A4 MDF PS PBIR34BI 3/4 BIRCH B2 WHITE (IMP) PAFR14 1/4 AFR MAHGNY A4 VC PS PBIR34B 3/4 BIRCH B2 NATURAL (DOM) PAFR34 3/4 AFR MAHGNY A1 VC (DOM) PBIR34CI 3/4 BIRCH C2 WHITE (IMP) PAFR34AD 3/4 AFR MAHGNY A1 VC PS (DOM) PBIR34410 3/4 BIRCH A2 WHITE 4X10 (DOM) PAFR34MDF 3/4 AFR MAHGNY A1 MDF PS PBIR14410 1/4 BIRCH A4 WHITE 4X10 (DOM) PBIR34PG 3/4 BIRCH PG PAINT GRADE (IMP) STK # KNOTTY PINE PKP14D 1/4 KNOTTY PINE A4 (DOM) STK # UV BIRCH PLYWOOD PKP34 3/4 KNOTTY PINE A2 (DOM) PBIR14UV 1/4 BIRCH UV FINISHED 1SG PBIR12UV2 1/2 BIRCH C2 UV FINISHED 2SG STK # MAPLE PBIR12UV 1/2 BIRCH C2 UV FINISHED 1SG PMAP14W 1/4 MAPLE B2 WHITE 2SG (DOM) PBIR34UV1 3/4 BIRCH C2 UV 1SG (IMPORT) PMAP14BD 1/4 BEADED WHITE MAPLE MDF PUVBIR342C 3/4 BIRCH C2 UV 2SG (IMPORT) PMAP14MDF 1/4 B2 WHITE MAPLE (DOM) MDF PUVBB12 1/2 BALTIC BIRCH UV 5X5 PMAP34AD 3/4 WHITE MAPLE A1 WPF (DOM) PMAP34B 3/4 MAPLE B2 WHITE STAIN (DOM) STK # BALTIC BIRCH PMAP34D3 3/4 MAPLE D3 PAINT GRADE (DOM) PBBIR1855 1/8 BALTIC BIRCH 5X5 PMAP34MDF 3/4 MAPLE B2 WHITE WPF MDF PBBIR1455 1/4 BALTIC BIRCH 5X5 PMAP14D3D 1/4 D3 PAINT MAPLE (DOM) PBBIR38 3/8 BALTIC BIRCH 4X8 PMAP14C3D 1/4 C3 WHITE PAINT MAPLE (DOM) PBBIR3855 3/8 BALTIC BIRCH 5X5 PMAP1D3 1" THICK D3 MAPLE PAINT (DOM) PBB 1/2 BALTIC BIRCH 5X5 PMAP14410 1/4 D3 PAINT MAPLE 4X10 (DOM) PBBIR12 1/2 BALTIC BIRCH 4X8 PMAP34410 3/4 D3 PAINT MAPLE 4X10 (DOM) PBBIR5855 5/8 BALTIC BIRCH 5X5 PMAP34C3 3/4 C3 NATURAL CAB MAPLE (DOM) PBBIR3455 3/4 BALTIC BIRCH 5X5 PMAP34MDFW 3/4 MAPLE A1 MDF-WHITE (DOM) PBBIR34 3/4 BALTIC BIRCH 4X8 MEDIUM DENSITY FIBERBOARD MELAMINE STK # MDF PFBD1448 1/4 A-GRADE MDF STK # ALMOND MELAMINE PFBD3848 3/8 A-GRADE MDF PMPN141A 1/4 MELAMINE 1S ALMOND (MDF) PFBD1248 1/2 A-GRADE MDF PMPN342A 3/4 MELAMINE 2S ALMOND (PTB) PFBD5848 5/8 A-GRADE MDF PFBD3448 3/4 A-GRADE MDF STK # BLACK MELAMINE PFBD34410 3/4 A-GRADE MDF 4X10 PMPN141B 1/4 MELAMINE 1S BLACK (MDF) PFBD34510 3/4 A-GRADE MDF 5X10 PMPN58BFB 5/8 MELAMINE 2S BLACK (MDF) PFBD148 1" A GRADE MDF PMPN342B 3/4 MELAMINE 2S BLACK (PTB) PMDF34LITE 3/4 (ARAUCO) LITE MDF PMPN342BFB 3/4 MELAMINE 2S BLACK (MDF) STK # PARTICLE BOARD STK # GREY MELAMINE PTB3448 3/4 PARTICLE BOARD TEMSTOCK PMPN14MG 1/4 MELAMINE MAPLE/LIGHTGREY PMPN342LG 3/4 MELAMINE 2S LIGHT GREY (PTB) STK # RED OAK PMPN14DGA 1/4 MELAMINE DARKGREY/ALMOND PRO14I 1/4 RED OAK B4 1SG (IMP) PMPN34DG 3/4 MELAMINE 2S LONDON GREY PTB PRO14C 1/4 RED OAK C3 2SG (DOM) PRO12S 1/2 RED OAK B2 (DOM) STK # MAPLE MELAMINE PRO34 3/4 RED OAK B2 VC (IMP) PMPN14MG 1/4 MELAMINE MAPLE/LIGHTGREY PRO34B2 3/4 RED OAK B2 STAIN (DOM) PMPN342HM 3/4 HARDROCK MAPLE 2SG (PTB) PRO34MDF 3/4 RED OAK A1 MDF PS (DOM) PRO34APS 3/4 RED OAK A2 PS (DOM) STK # WHITE MELAMINE PRO34A 3/4 RED OAK STAIN A1 VC (DOM) PMPN141W 1/4 MELAMINE 1S WHITE MDF PMPN14BW 1/4 MELAMINE WHITE/BLACK MDF WALNUT PMPN142D 1/4 MELAMINE 2S WHITE MDF PWAL14D 1/4 WALNUT B4 PS (DOM) PMPN12W 1/2 MELAMINE 2S WHITE (PTB) PWAL34AD 3/4 WALNUT A1 VC PS (DOM) PMPN582W 5/8 MELAMINE 2S WHITE (MDF) PWAL34MDF 3/4 WALNUT A1 MDF PS (DOM) PMPN58WFB 5/8 MELAMINE 2S BLACK (MDF) PMPN341W 3/4 MELAMINE 1S WHITE (PTB) STK # WHITE OAK PMPN34 3/4 MELAMINE 2S WHITE PWO14C 1/4 WHITE OAK C2 PS 1SG (DOM) PMPN34VCW 3/4 MELAMINE 2S WHITE VC PWO34AD 3/4 WHITE OAK A1 P/S VC (DOM) PMPN342WFB 3/4 MELAMINE 2S WHITE (MDF) PMPN34VCB 3/4 MELAMINE 2S BLACK VC STK # LAUAN PLUN1848 1/8 LAUAN/MERANTI VC STK # BENDER BOARD PBBD3884 3/8 8X4 BENDER BOARD STK # MDO PMDO 3/4 MDO FIR PLYWOOD 2SG ALL PRICES & PRODUCTS ON THIS LIST ARE SUBJECT TO CHANGE AT ANY GIVEN TIME. MOULDINGS STK # ALDER MOULDINGS STK # MAHOGANY MOULDINGS WALDN DN CLOVER EDGE 3/8 X 3/4 WHMGB11 B11 BASE 4 1/2 WALPM5 1/4 X 1-1/4 PM5 PANEL WHMGCM3 CM3 EDGE MOULD WALPM6 15/16 X 1-9/16 PM6 PANEL WHMGCM6 CM6 LIP MOULD WALCM12 CM 12 LIP MOULDING WHMGCR48 4 1/4 CROWN WALQR QUARTER ROUND WHMGCR52 1/2 X 2-3/4 CROWN WALCO COVE MOULDING WHMGCR7 CR 7 CHAIR RAIL WALSM FLAT SCREEN MOULDING WHMGPM5 3/4 X 1-1/4 PM 5 PANEL WALCM3 CM3 MOULDING WHMGQR 3/4 QUARTER ROUND WALSHOE SHOE MOULDING 1/2 X 3/4 WHMGSM FLAT SCREEN WALCR48 4 1/4 CROWN MOULDING WHMGCO COVE 3/4 X 3/4 WALCR52 1/2 X 2-3/4 CROWN WHMGOSC OUSTSIDE CORNER 1" X 1" WHMGDN DN DECORATIVE 1/4"X3/4" STK # ASH MOULDINGS WHMGDF DF DECORATIVE 11/16"X1-1/2" WASSM 1/4" X 3/4" SCREEN MOULDING WHMGHR 1-1/2" HALF ROUND WASQR QUARTER ROUND MOULDING WHMGPM1 PM1 PANEL MOULD WASPM6 15/16 X 1-9/16 PM6 PANEL WHMGC11 C11 CASING MOULDING WASPM1 PM1 PANEL MOULDING WHMGSHOE 1/2" X 3/4" SHOE MOULDING WASPM5 PM5 PANEL MOULDING WHMGCO85 1"-3/4" WIDE COVE MOULDING WASCM6 CM6 LIP MOULDING WHMGSMBD BEADED SCREEN MOULDING WASSHOE SHOE MOULDING 1/2 X 3/4 WHMGFLUT FLUTED/BEADED 3-1/4" WASBD75 BED MOULD WHMGCR55 5 1/2 CROWN MOULDING WASSMBD BEADED SCREEN MOULD WHMGPM6 3/4 X 2" PM 6 PANEL WASCR48 4 1/4 CROWN MOULDING WASCM12 CM12 LIP MOULD STK # POPLAR MOULDINGS WASCR52 1/2 X 2-3/4 CROWN WPOB11 4-1/2 B11 BASE MOULDING WPOC11 3-1/2 C11 CASING STK # CHERRY MOULDINGS WPOCM12 CM 12 LIP MOULDING WCHCM3 CM 3 EDGE MOULD WPOCM3 CM 3 EDGE MOULDING WCHCM6 7/8 X 1-1/2 CM 6 LIP WPOCM6 CM 6 LIP MOULDING WCHCO COVE MOULDING WPOCO COVE MOULDING 3/4"X3/4" WCHCR48 9/16 X 4-1/4 CROWN WPOCR48 9/16 X 4-1/4 CROWN WCHCR52 1/2 X 2-3/4 CROWN WPOCR52 2-3/4 CROWN WCHCR7 CR 7 CHAIR RAIL WPOCR7 CR 7 CHAIR RAIL WDN DN CLOVER EDGE 1/4 X 3/4 WPODF DF CLOVER 11/16 X 1 1/2 WCHFLUT FLUTED/BEADED CASING 3 1/4 WPODN DN CLOVER EDGE 1/4 X 3/4 WCHPM5 1/4 X1-1/4 PM5 PANEL WPOFLUT FLUTED/BEADED 3-1/4 WCHPM6 15/16 X 1-9/16 PM6 PANEL WPOPCR48 CR48 CROWN MOULDING WCHSM FLAT SCREEN WPOPM5 PM 5 MOULDING WCHOSC OUSTSIDE CORNER 1" X 1" WPOPM6 PM 6 MOULDING WCHDF 11/16" X 1-1/2" MOULDING WPOSM SCREEN MOULD WCHHR 1-1/2" HALF ROUND WPOSMBD BEADED SCREEN MOULD WCHQR 3/4" X 3/4" QUARTER ROUND WPOOSC OUTSIDE CORNER 1" X 1" WCHSHOE 1/2" X 3/4" SHOE MOULDING WPOHR 1-1/2 HALF ROUND WCHBD75 BED MOULD WPOPM1 PM1 PANEL MOULD WCHSMBD 1/4"X3/4" BEADED SCREEN MOULD WPOPM1 PM1 PANEL MOULD WCHMCM12 CM12 LIP MOULD WPOTA4 CASING TA4 2-1/2" WCHQR 3/4 X 3/4 QUARTER ROUND WPOSHOE SHOE MOULD 1/2"X3/4" WPOCO85 1-3/4" COVE MOULD WPOBD75 1-3/4" BED MOULD WPOCR55 5-1/2 CROWN MOULDING ALL PRICES & PRODUCTS ON THIS LIST ARE WPOCO85 1-3/4" COVE MOULD SUBJECT TO CHANGE AT ANY GIVEN TIME. WPOCA325 5/8"X3-1/4" CASING WPOQR 3/4" QUARTER ROUND MOULDINGS STK # MAPLE MOULDINGS STK # RED OAK MOULDINGS WMAB11 B11 BASE 4 1/2" WOB11 4-1/2 B11 BASE WMACM12 CM 12 LIP MOULD WOBD75 BED MOULD BD 75 WMACM3 CM 3 EDGE MOULD WOC11 3-1/2 C11 CASING WMAPCM6 7/8 X 1-1/2 CM 6 LIP WOCM12 CM 12 LIP MOULD WMACO COVE MOULDING 3/4"X3/4" WOCM3 CM3 EDGE MOULD WMAPCR48 9/16 X 4-1/4 CROWN WOCM6 7/8 X 1-1/2 CM 6 LIP MOULD WMAPCR52 1/2 X 2-3/4 CROWN WOCO COVE MOULDING WMADF DF CLOVER 11/16 X 1 1/2 WOCR48 4-1/4 CROWN WMADN DN CLOVER EDGE 1/4 X 3/4 WOCR52 2-3/4 CROWN WMAFLUT FLUTED/BEADED CASING 3 1/4 WOCR7 CR 7 CHAIR RAIL WMAPPM5 1/4 X 1-1/4 PM 5 PANEL WODF DF CLOVER 11/16 X 1 1/2 WMAPPM6 15/16 X 1-9/16 PM 6 PANEL WODN DN CLOVER EDGE 1/4 X 3/4 WMAPQR 3/4 X 3/4 QUARTER ROUND WOFLUT 3-1/2 FLUTED/BEADED CASING WMACR7 CR 7 CHAIR RAIL WOPM5 3/4 X 1-1/4 PM 5 PANEL WMHCR52 HARD MAPLE 1/2 X 2-3/4 CROWN WOPM6 3/4 X 2" PM 6 PANEL WMATM T-MOULD 5/8 X 2 WOQR111 3/4 X 3/4 QUARTER ROUND WMAHR 1-1/2" HALF ROUND WOSM142 1/4 X 3/4 SCREEN MOULD WMAPM1 PM1 PANEL MOULD WOBT BABY THRESHOLD WMAC11 C11 CASING 3 1/2" WOHR HALF ROUND 1 1/2 WMASHOE SHOE MOULD WOOSC OUTSIDE CORNER 1" X 1" WMABD75 BED MOULD WOSHOE SHOE MOULD 1/2 X 3/4 WMACR55 5-1/2 CROWN MOULD WOTM T-MOULD 5/8 X 2 WMASMBD BEADED SCREEN MOULD WOHR 1-1/2" HALF ROUND WMACO85 COVE 1-3/4" WOTA4 2-1/2" TA4 CASING WMACR390 CHAIR RAIL 390 WOPM1 PM1 PANEL MOULDING WMASM FLAT SCREEN MOULD WOCO85 1-3/4" COVE MOULD WOCR55 5-1/2 CROWN MOULDING STK # WALNUT MOULDINGS WOCA325 CA325 CASING WWACM3 CM3 EDGE MOULD WOSMBD BEADED SCREEN MOULDING WWACR48 9/16 X 4-1/4 CROWN WWACR52 1/2 X 2-3/4 CROWN STK # PINE MOULDINGS WWAPM5 1/4 X 1-1/4 PM5 PANEL WWPPM5 PM 5 FJ PINE PANEL MOULD WWAQR QUARTER ROUND 3/4"X3/4" WWPPM6 PM 6 FJ PINE PANEL MOULD WWADF DF MOULDING WWPB11 4-1/2" B11 FJ PINE BASE MOULD WWAHR 1-1/2" HALF ROUND WWPCM6 CM 6 FJ PINE LIP MOULD WWASM 1/4"X3/4" SCREEN MOULD WWPCR49 3-3/8" CR49 FJ PINE CRWN MOULD WWAPM6 PM6 PANEL MOULD WWPCM12 CM 12 FJ PINE LIP MOULD WWAB11 B11 BASE 4-1/2" WWPCR45 5-1/4" CR45 FJ PINE CRWN MOULD WWAOSC OUTSIDE CORNER 1"X1" WWPB14 6-1/2" B14 FJ PINE BASE MOULD WWACR55 5-1/2" CROWN WWPC11 3-12" C11 FJ PINE CASING MOULD WWASHOE SHOE MOULDING 1/2"X3/4" WWPCR7FJ 2 1/2" CR7 FJ PINE CHAIR RAIL WWAPM6 15/16 X 1-9/16 PM6 PANEL WWPCR52FJ 2 3/4" CR52 FJ PINE CROWN MOULD WPCR48FJ 4-1/4" CR48 FJ PINE CRWN MOULD STK# MDF MOULDINGS WWPWS514 5-1/4" WINDOW STOOL FJ WMDFB11 MDF B11 BASE 4-1/2" (PRIMED) WWPWS714 7-1/4" WINDOW STOOL FJ WMDFC11 MDF C11 CASING 3-1/2" (PRIMED) WMDFCR48 MDF CR48 CROWN 4-1/4" (PRIMED) WMDFGM218 MDF GM218 BASE 5-1/4" (PRIMED) ALL PRICES & PRODUCTS ON THIS LIST ARE WMDFMB MDF BASE 3-1/4" (PRIMED) SUBJECT TO CHANGE AT ANY GIVEN TIME.
Load more

Recommended publications
  • Use of Wood Residue in Making Reconstituted Board Products
    University of Montana ScholarWorks at University of Montana Graduate Student Theses, Dissertations, & Professional Papers Graduate School 1959 Use of wood residue in making reconstituted board products Suthi Harnsongkram The University of Montana Follow this and additional works at: https://scholarworks.umt.edu/etd Let us know how access to this document benefits ou.y Recommended Citation Harnsongkram, Suthi, "Use of wood residue in making reconstituted board products" (1959). Graduate Student Theses, Dissertations, & Professional Papers. 3981. https://scholarworks.umt.edu/etd/3981 This Thesis is brought to you for free and open access by the Graduate School at ScholarWorks at University of Montana. It has been accepted for inclusion in Graduate Student Theses, Dissertations, & Professional Papers by an authorized administrator of ScholarWorks at University of Montana. For more information, please contact [email protected]. THE USE OF WOOD RESIDUE IN MAKING RECONSTITUTED BOMD HiODUCTS SUTHI HARNSOMJKRAM B.S.F., Unlveinsity of the Philippines, 1952 Presented in partial fulfillment of the requirements for the degree of Master of Forestry MONTANA STATE UNIVERSITY 1959 Approved Dean, Graduate School I 3 I960 Date UMI Number: EP34193 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent on the quality of the copy submitted. In the unlikely event that the author did not send a complete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. UMT " DlM«litionP«ibWfca ^ UMI EP34193 Copyright 2012 by ProQuest LLC. All rights reserved. This edition of the work is protected against unauthorized copying under Title 17, United States Code.
    [Show full text]
  • Builders Choice Moulding & Millwork Profile Guide
    Moulding & Millwork profile guide OUR HISTORY OrePac is a family-owned and operated business, founded by the Hart family in 1976. Through strong leadership and a commitment to success, the company has grown into one of the premier distributors in the building industry. Trust, integrity and a dedication to excellence are the values most important to OrePac. That commitment can be found in the services we offer, the quality of the products we provide, and the way we treat our employees and customers. This dedication to our markets has enabled us to make a positive impact on the shelter industry and the communities we serve. DOMESTIC SOLUTIONS Located in the heart of Oregon’s Willamette Valley, OrePac Manufacturing (previously known as Dallas Planing Mill, Inc.) has been in operation since 1883. OrePac produces millwork products including Hemlock, Ponderosa Pine, Knotty Alder and many other hardwoods. CUSTOM PRODUCTS With the ability to produce custom patterns through CAD drawings, templates, and knives, we can meet all of your moulding needs in one facility. This makes OrePac Manufacturing a valuable resource to OrePac and its customers. DISTRIBUTION CENTERS Boise, ID Bozeman, MT CORPORATE Denver, CO Wilsonville, OR Ontario, CA MANUFACTURING Phoenix, AZ Dallas, OR Sacramento, CA DISTRIBUTION CENTERS Salt Lake City, UT Spokane, WA Tacoma, WA Wilsonville, OR TABLE OF CONTENTS MOULDING 101 5 Handling of Millwork 6 Common Moulding Applications 8 Species Types PROFILES 10 Base 18 Casing 26 Crown 30 Chair Rail, Hand Rail 32 Rounds 33 Stop 34 Stop, Square, Parting Strip, Screen Mould, Brickmould 35 Outside Corner, Lattice 36 Cove 37 Miscellaneous 40 Boards 45 Jambs, Frames 46 Mullion, Astragal 47 Particle Board Shelving, MDF Sheet Stock Moulding images5500 are S Federal not to scale Way | Boise, ID 83716 | T: 208-345-0562 | F: 208-343-4808 | www.orepac.comwww.orepac.com 3 4 Moulding images are not to scale HANDLING OF MILLWORK Unfinished Woodwork is Vulnerable! • Apply finish as soon as possible following the manufacturer’s finishing instructions.
    [Show full text]
  • Development of Particleboard from Waste Styrofoam and Sawdust
    18 ABDULKAREEM et al: DEVELOPMENT OF PARTICLEBOARD FROM WASTE STYROFOAM AND SAWDUST Development of Particleboard from Waste Styrofoam and Sawdust S. A. Abdulkareem1, S. A. Raji2, A. G. Adeniyi1* 1Chemical Engineering Department, University of Ilorin, Ilorin, Nigeria. 2 Civil Engineering Department, University of Ilorin, Ilorin, Nigeria. ABSTRACT: The use of Plastic Based Resin (PBR) synthesised from waste Styrofoam as binder in the production of particleboard was the focus of this investigation. This study explored the properties of particleboard produced from sawdust wastes and PBR resin synthesized from waste Styrofoam. Three particleboard panels namely C1, C2 and C3 were prepared with 20%, 30%, and 40%, (v/v), respectively. PBR was synthesised via solvolysis of waste Styrofoam in a chosen solvent, and properly mixed with sawdust by simple mechanical stirring, using hand lay-up process in cold pressing to obtain the desired shapes. ASTM D-1037 standard was used to evaluate the physical and mechanical properties of the manufactured particleboards. Density, moisture content (MC), water absorption (WA), thickness swelling (TS), and mechanical properties i.e. modulus of elasticity (MOE) and modulus of rupture (MOR) of C2 and C3 were better than that of C1 particleboard and met the LD-1 requirement of ANSI A208.1. PBR from Styrofoam waste is confirmed as a good substitute for Urea or formaldehyde based resin presently used industrially. The properties of C2 and C3 synthesised are in tandem with the requirements of the ANSI A208.1 standards. KEYWORDS: styrofoam waste, plastic-based resin, particleboard, sawdust waste, curing. [Received December 16 2016; Revised March 27 2017; Accepted June 1 2017] I.
    [Show full text]
  • PC18 Doc. 11.6
    PC18 Doc. 11.6 CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD FAUNA AND FLORA ____________ Eighteenth meeting of the Plants Committee Buenos Aires (Argentina), 17-21 March 2009 Annotations TREE SPECIES: ANNOTATIONS FOR SPECIES INCLUDED IN APPENDICES II AND III 1. This document has been submitted by the regional representative of North America as Chair of the working group on Tree species: annotations for species included in Appendices II and III (PC17 WG3)*. 2. The Conference of the Parties adopted Decision 14.148 directed to the Plants Committee as follows: a) The Plants Committee shall review and, if appropriate, draft amendments to the annotations to the tree species listed in Appendices II and III and/or shall prepare clear definitions for the terms used in those annotations in order to facilitate their use and understanding by CITES authorities, enforcement officers, exporters and importers. b) The amended annotations shall focus on the articles that initially appear in international trade as exports from the range States and on those which dominate the trade in and demand for the wild resource. c) The Plants Committee shall draft, if necessary, proposals to amend Resolution Conf. 10.13 (Rev. CoP14) and/or to amend the Appendices accordingly so that the Depositary Government may submit them on its behalf for consideration at the 15th meeting of the Conference of the Parties. 3. A working group (WG3) was established at the 17th meeting of the Plants Committee (PC17) to undertake a review of tree annotations. The mandate
    [Show full text]
  • Lumber and Related Products; a Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond
    4-f,r ' DOCUMENT RESUME ED 031 558 VT 007 859 Lumber and Related Products; A Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond. Pub Date Aug 68 Note-108p.; From NDEA Inst. on Wood Technology (Eastern Kentucky UM, June 10-Aug. 2, 1968). EDRS Price MF-$0.50 HC-$5.50 Descriptors-*Building Materials, Curriculum Development, *Curriculum Guides, *Industrial Arts, Instructional Improvement, Lumber Industry, *Resource Materials, Summer Institutes, Teacher Developed Materials, Teacher Education, *Woodworking Identifiers-*National Defense Education Act Title XI Institute, NDEA Title XI Institute Prepared by participants in the 1%8 National Defense Education Act Institute on Wood Technology, this syllabus is one of a seriesof basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and .content of their programs. The primary objective of this course outhne is to point out the importance and the many uses of wood and wood products. Topics covered are: (1 )Lumber Grades and Sizes,(2)Plywood,(3)Veneer,(4)Fiberboard,(5) Particleboard,(6)Sheetboard,(7)InsulationBoard,(8)StructuralSandwich Construction,(9)Shingles,(10)Pulp and Paper,(11) Wood Flour,and (12) Cellulose-DerivedProducts.Mostunitscontain 'informationonmanufacturing processes, properties,types and grades, and uses of the products. Selected bibliographies are listed for each unit. The final section provides instructional aids, suggested projects and student activities, and materials and equipment needed for specific prolects. The document is &strafed with drawings, charts, and photographs. Related documents are available as VT 007 857, VT 007 858, and VT 007 861: (AW) ft; LUMBER BAS YLLABUS ON WOOD CHNOLOGY .:'Pre,pare4 by INSTITUTE.
    [Show full text]
  • Product Mix * Huge Inventory*
    * FAST DELIVERY * PRODUCT MIX * HUGE INVENTORY* INDUSTRIAL PANELS PINE PRODUCTS CEDAR PRODUCTS SYP Plywood Gorman Elite Boards Cedar Valley Shingle Panels Hardwood Plywood Clear Finished Knotty Pine Cedar Patterns–Raw/Finished Industrial Particleboard Glacier Lodge™ Family of Pine Prod. Clear & Knotty Cedar Bevels Lath Clear Pine Boards Deck Rail Balusters Lauan Underlayment #3 Pine Boards Clear Patterns, Boards & Dimension MDF (Medium Density Fiberboard) Primed Siding and T&G Knotty Boards & 5/4 MDO (Medium Density Overlay) Glacier Lodge™ Log Siding & Trim Decorator Shingles Native Rough Lumber White Pine Patterns Surfaced Dimension Knotty Patterns Particle Board Counter Tops Premium Furring Strips Knotty Ranch & Wavy Edge Bevels Particle Board – Industrial SYP Pine Patterns DECKING & RAILING Lattice—Heavy Duty Particle Board Stair Treads & Risers Radius Edge Decking KD Plyform – Pine BBOES Trex Decking & Railing Cedar Decking & Railing Cedar Shakes & Shingles Selex AC Sanded Plywood Signature Ipé Hardwood Deck & Rail Shims (Cedar) Selex StarBead Wild Hog Railing Sidewall Shingles EWP PRODUCTS 2x6 T&G Select Deck Board Split Rail Fencing Trus Joist TJI® Floor Joists DIMENSION LUMBER Timbers (R/S or S4S) ® Microllam LVL Beams Long Length Dimension Squares (R/S or S4S) Parallam® PSL Beams Crating Lumber WRC Rough Dimension Parallam® PSL Columns ENGINEERED SIDING & TRIM Coulson Engineered Cedar Pattern Parallam Plus® Treated PSL Beams James Hardie Fiber Cement Siding FASTENERS TimberStrand® LSL Beams Miratec Treated Composite Trim Eb-Ty™
    [Show full text]
  • Mechanical Properties of Urea Formaldehyde Particle Board Composite
    American Journal of Chemical and Biochemical Engineering 2018; 2(1): 10-15 http://www.sciencepublishinggroup.com/j/ajcbe doi: 10.11648/j.ajcbe.20180201.12 Mechanical Properties of Urea Formaldehyde Particle Board Composite Ejiogu Ibe Kevin 1, *, Odiji Mary Ochanya 2, Ayejagbara Mosunmade Olukemi 3, Shekarri Tachye Ninas Bwanhot 3, Ibeneme Uche 3 1Directorate of Research and Development, Nigeria Institute of Leather and Science Technology, Zaria, Nigeria 2Department of Chemistry, Ahmadu Bello University, Samaru, Zaria, Nigeria 3Department of Polymer Technology, Nigeria Institute of Leather and Science Technology, Zaria, Nigeria Email address: *Corresponding author To cite this article: Ejiogu Ibe Kevin, Odiji Mary Ochanya, Ayejagbara Mosunmade Olukemi, Shekarri Tachye Ninas Bwanhot, Ibeneme Uche. Mechanical Properties of Urea Formaldehyde Particle Board Composite. American Journal of Chemical and Biochemical Engineering . Vol. 2, No. 1, 2018, pp. 10-15. doi: 10.11648/j.ajcbe.20180201.12 Received : May 25, 2018; Accepted : June 7, 2018; Published : July 4, 2018 Abstract: Particle boards were prepared from sawdust and urea-formaldehyde resin (UFR) on compression moulding machine. The particleboards were produced at a compression temperature of 150°C; a pressure of 10tons was applied for 15 minutes. The amount of sawdust was kept constant at 20g while UFR was varied from 30ml, 35ml, 40ml and 45ml respectively. The control sample (CS) was the 50ml UFR without any saw dust. The properties of the particleboards were tested using ASTM methods. The results showed that the properties of the particleboards are a function of the percentage composition of the binder (resin) and the filler (sawdust). The results showed that as the URF content increased from 30ml to 45ml, the mechanical properties increased.
    [Show full text]
  • Download the CARB Presentation in PDF Format
    WHAT DOES CARB MEAN TO MY BUSINESS AS A FABRICATOR? Sharing information with our partners Prepared by July, 2008 INDOOR AIR QUALITY IS A TOP PRIORITY CALIFORNIA ELIMINATES ADDED UREA FORMALDEHYDE This session will provide information on CARB, its January, 2009 launch date with following Phases, and impacts upon fabrication with documentation requirements for the HPL markets. INDOOR AIR QUALITY IS A TOP PRIORITY CALIFORNIA ELIMINATES ADDED UREA FORMALDEHYDE As we begin, it is important to note that: HPL doesn’t contain added formaldehyde. Lamin-Art HPL has been certified by GREENGUARD as a low-emitting product for indoor air quality. The application of HPL to CARB compliant core material with proper adhesives helps to assure air quality for healthy indoor environments. WHAT IS THE CALIFORNIA AIR RESOURCES BOARD (CARB)? One of six agencies within the California Environmental Protection Agency, EPA, the Air Resources Board’s (ARB) mission is to “Promote and protect public health, welfare and ecological resources through the effective and efficient reduction of air pollutants in recognition and consideration of the effects on the economy of the state.” HOW CAN CARB INFLUENCE MY BUSINESS? The state of California has led the U.S. as an early adopter of many environmental and health/safety initiatives. History has shown the U.S. market to quickly follow California. HOW CAN CARB INFLUENCE MY BUSINESS? In 1992 the EPA identified formaldehyde as a probable carcinogen and the state of California named it a toxic air contaminant with no safe level of exposure. HOW CAN CARB INFLUENCE MY BUSINESS? In 2001, the United States Green Building Council, USGBC’s LEED rating system began awarding credit for use of composite wood products with no added urea formaldehyde, setting a high standard an clear signal to the market.
    [Show full text]
  • Oriented Strand Board Industry Development in the South American Region - Main Challenges
    Proceedings of the 51st International Convention of Society of Wood Science and Technology November 10-12, 2008 Concepción, CHILE Oriented Strand Board Industry Development in the South American Region - Main Challenges Victor Gaete-Martinez PhD Student University of Maine AEWC Center, Orono ME, USA. BSc, Forestry Science University of Chile [email protected]. Alejandro Bozo Associate Professor University of Chile, Santiago-Chile [email protected] Abstract Unlike North American (N.A.) and European markets, the oriented strand board (OSB) industry is currently in an introductory stage of development in South America (S.A.). Although OSB mills have been operating for more than five years in Chile and more recently in Brazil and Venezuela, the production levels and consumption remain far below those existing in more mature markets. In contrast particleboard and medium density fiberboard (MDF) industries had a very intense and fast development in the past for the same market and even under less favorable conditions. Even other structural wood composites have a more expanded development in the region, i.e. LVL. Although the remarkable structural properties of OSB and potential advantages over other building materials are well known, some factors disallowing a stronger positioning of the product exist. The objective of this research was to analyze the evolution of the OSB industry in the South American region and determine the obstacles and challenges that this industry currently faces. A comparative analysis was carried out between the N.A. and S.A. OSB market evolutions; cultural backgrounds; research and development (R&D) investment and initiatives as well as political and governmental influence.
    [Show full text]
  • Sustainable Architectural Woodwork Materials
    Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual—CSI Manual of Practice, Fifth Edition. The section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section. Section numbers and titles are from MasterFormat 1995 Edition, with numbers and titles from MasterFormat 2004 Edition in parentheses. Delete version not required. SECTION 06400 (06 40 00) ARCHITECTURAL WOODWORK Specifier Notes: This section covers the following Kerfkore Bendable substrate materials: 1. Kerfkore (single sided, double sided) 2. Kerfkore Green (single sided, double sided) 3. Flexboard 4. Flexboard Green 5. Timberflex 6. Econokore Consult Kerfkore for assistance in editing this section for the specific application. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bendable Products: Bendable Architectural Woodwork Materials 060500 (06 05 00) - 1 Specifier Notes: Edit the following list for the specified materials. 1. Kerfkore – substrate that enables lamination first with HPL, metal, veneer and other semi rigid materials and then bending down to 3-1/2”. Available with a semi rigid back side to keep the material stiff until the kerf is removed. 2. Kerfkore Green – NAF core (100% recovered and recycled). Substrate that enables lamination first with HPL, metal, veneer and other semi rigid materials and then bending down to 3-1/2”. 3. Flexboard – substrate that has a uniform and stable overlay that allows for traditional face lamination after forming with a radius of 10”.
    [Show full text]
  • Pressboard, Particle Board And/Or Engineered Wood Furniture
    Phone: (518) 462-0697 Toll-free: (800) 462-0697 Fax: (518) 427-7644 981 Broadway, Albany, NY 12207 Pressboard, Particle Board and/or Engineered Wood Furniture Furniture manufactured from pressboard, particle board and engineered wood is designed to go into a box from the manufacturer, to the retailer, and then to the customer unassembled. It is not built to withstand the normal stresses of a move as an assembled unit. Most is not designed with the extra wood structural pieces to adequately brace the unit for movement out of or into a residence, nor the normal truck vibration, even in air ride trailers. Usually chips or dents are not repairable. Surface impressions can be made on the furniture when writing on a single piece of paper. [ ] Option 1 – I/we choose to disassemble all press board, particle board and/or engineered wood furniture prior to move. I/we assume all responsibility for damage to the pressboard, particleboard and/or engineered wood furniture, which may occur during the disassembly of the furniture. [ ] Option 2 – I/we have engaged the services of another individual or company to disassemble all press board, particle board and/or engineered wood furniture prior to move. I/we assume all responsibility for damage which may occur to the pressboard, particle board and/or engineered wood furniture during the disassemble of the unit. [ ] Option 3 – I/we, am/are tendering furniture constructed of press board, particle board and/or engineered wood fully assembled as part of our move. I/we understand that any claim for damage to the press board, particle board and/or engineered wood furniture may be denied due to inherent vice, based upon the fact that fully assembled press board, particle board, and/or engineered wood furniture is inherently susceptible to damage as outlined above.
    [Show full text]
  • Evaluating the Warping of Laminated Particleboard Panels
    7th Pacific Rim Bio-Based Composites Symposium Evaluating the Warping of Laminated Particleboard Panels Zhiyong Cai, Ph.D., P.E. USDA Forest Service Forest Products Laboratory One Gifford Pinchot Dr. Madison, WI 53726-2398 [email protected] ABSTRACT Laminated wood composites have been used widely in the secondary manufacturing processes in the wood panel industries. Warping, which is defined as the out-of-plane deformation of an initially flat panel, is a longstanding problem associated with the use of laminated wood composites. The mechanism of warping is still not fully understood. A new two-dimensional warping model based on mechanics of layered composites was introduced to simulate the warping behavior of laminated wood composites. Actual warping performances of veneered particleboard panels under different relative humidity environments were tested and compared with the predicted warping performances based on the two-dimensional warping model. The result indicted that the new warping model could be used to simulate the warping behavior of layered wood-based composites. Keywords: laminated, warping, wood composite, layered, simulation. INTRODUCTION Laminated wood composites have been used widely in the secondary manufacturing processes in the wood panel industries. Warping of wood-based composites is a long-standing problem associated with use of laminated wood composite panels. Warping is defined as the out-plane deformation of a panel from an initially flat condition (Suchsland and McNatt 1986). Severe warping of finished products has the potential to significantly increase the cost of manufacturing and lower the consumer’s confidence in using wood products. The Composite Panel Association (previously called the National Particleboard Association) considers warp to be the leading technical problem requiring further investigation (National Particleboard Association 1996).
    [Show full text]