EPA-P1-500, Needham, the Likely Medium to Long-Term Generation

Total Page:16

File Type:pdf, Size:1020Kb

EPA-P1-500, Needham, the Likely Medium to Long-Term Generation R&D Technical Report P1-500/1/TR The likely medium to long-term generation of defects in geomembrane liners Environment Agency Likely medium to long-term generation of defects in geomembranes 1 The Environment Agency is the leading public body protecting and improving the environment in England and Wales. It’s our job to make sure that air, land and water are looked after by everyone in today’s society, so that tomorrow’s generations inherit a cleaner, healthier world. Our work includes tackling flooding and pollution incidents, reducing industry’s impacts on the environment, cleaning up rivers, coastal waters and contaminated land, and improving wildlife habitats. Published by: Authors: Environment Agency Needham, A., Gallagher, E., Peggs, I., Howe, G. & Norris, J. Rio House EDGE Consultants UK Ltd, in association with I-Corp International Waterside Drive, Aztec West Inc., Nottingham Trent University and RAPRA Technology Ltd. Almondsbury, Bristol BS32 4UD Tel: 01454 624400 Fax: 01454 624409 Statement of use: This report presents a review of the processes and rates of ISBN: 1 84432 180 0 geomembrane degradation reported from laboratory and field studies. It reviews landfill monitoring data and research © Environment Agency, January 2004 from related fields to predict future rates of defect generation in geomembrane liners, for use in risk and performance All rights reserved. This document may be reproduced assessment of new landfill sites. This report should be used with prior permission of the Environment Agency. in conjunction with the Agency’s guidance on hydrogeological risk assessment for landfills and LandSim This report is printed on Cyclus Print, a 100% recycled v2.5+. stock, which is 100% post consumer waste and is totally chlorine free. Water used is treated and in most cases Environment Agency project manager: returned to source in better condition than removed. Jonathan Smith, EA Science Group: Air, Land & Water R&D Technical Report P1-500/1/TR Environment Agency Likely medium to long-term generation of defects in geomembranes 2 CONTENTS EXECUTIVE SUMMARY .................................................................................................................. 6 Acknowledgements ........................................................................................................................ 7 1 INTRODUCTION ..................................................................................................................... 8 1.1 OBJECTIVES .........................................................................................................................8 1.2 GEOMEMBRANES BARRIERS ................................................................................................8 1.3 DEFECTS IN GEOMEMBRANE LINERS ...................................................................................9 1.4 SCOPING STUDY.................................................................................................................10 1.5 OUTLINE OF THE REPORT...................................................................................................10 1.6 HOW TO USE THE REPORT .................................................................................................11 2 LITERATURE AND DATA REVIEW PROCESS ................................................................. 12 2.1 LITERATURE SOURCES.......................................................................................................12 2.2 SOURCES OF DATA ON ELECTRICAL LEAK LOCATION SURVEYS .........................................13 2.3 SOURCES OF DATA ON LANDFILL TEMPERATURES .............................................................13 3 GEOMEMBRANE LINERS................................................................................................... 14 3.1 BARRIERS...........................................................................................................................14 3.2 THE STRUCTURE AND PROPERTIES OF POLYETHYLENE FOR GEOMEMBRANE LINERS ......15 3.2.1 The structure of polyethylene.................................................................................15 3.2.2 Structural properties of polyethylene geomembranes........................................18 4 POLYETHYLENE DEGRADATION MECHANISMS........................................................... 20 4.1 TYPES OF DEGRADATION....................................................................................................20 4.2 OXIDATIVE DEGRADATION MECHANISMS ............................................................................22 4.3 ANTIOXIDANTS AND CARBON BLACK STABILISERS .............................................................26 4.4 ANTIOXIDANT DEPLETION ...................................................................................................28 5 LABORATORY STUDIES INTO OXIDATIVE DEGRADATION ......................................... 31 5.1 INTRODUCTION ...................................................................................................................31 5.2 TEST METHODS TO ASSESS DEGRADATION........................................................................31 5.2.1 Oxidative Induction Time.........................................................................................32 5.2.2 Molecular weight.......................................................................................................34 5.2.3 Tensile properties .....................................................................................................34 5.2.4 Stress crack resistance............................................................................................34 5.2.5 Crystallinity ................................................................................................................34 5.2.6 Polymer structure......................................................................................................35 5.2.7 Chemiluminescence.................................................................................................35 5.3 ARRHENIUS MODELLING.....................................................................................................35 5.4 ASSESSING TIME FOR LONG-TERM GEOMEMBRANE DEGRADATION...................................39 5.4.1 Hsuan and Koerner (1995 and 1998)....................................................................40 5.4.2 Sangam (2001).........................................................................................................43 5.4.3 Müller and Jakob (2003)..........................................................................................48 5.5 REVIEW OF LABORATORY RESEARCH INTO GEOMEMBRANE DURABILITY...........................56 5.5.1 Geomembrane materials.........................................................................................56 5.5.2 Test duration..............................................................................................................57 Environment Agency Likely medium to long-term generation of defects in geomembranes 3 5.5.3 Exposure medium and ageing temperature.........................................................57 5.5.4 Thickness effects......................................................................................................58 5.5.5 Absolute OIT values.................................................................................................59 5.5.6 Location of the OIT specimen.................................................................................60 5.5.7 Activation energy......................................................................................................60 5.5.8 Three stage degradation process ..........................................................................61 5.5.9 Selecting the liner service temperature.................................................................62 5.5.10 Conclusions on HDPE geomembrane durability laboratory testing ..............62 6 DURABILITY OF POLYETHYLENE LINERS IN FIELD APPLICATIONS ........................ 65 6.1 REPORTED FIELD PERFORMANCE ......................................................................................65 6.2 REVIEW OF REPORTED FIELD PERFORMANCE ...................................................................67 6.3 EXPOSURE CONDITIONS .....................................................................................................68 6.3.1 Temperatures at the liner.........................................................................................68 6.3.2 Ultraviolet radiation ..................................................................................................76 6.3.3 High energy radiation...............................................................................................77 6.3.4 Availability of oxygen................................................................................................77 6.3.5 Exposure to leachate ...............................................................................................79 6.3.6 External mechanical stresses.................................................................................82 7 STRESS CRACKING............................................................................................................ 83 7.1 INTRODUCTION ...................................................................................................................83 7.2 TESTING..............................................................................................................................85 7.4
Recommended publications
  • From the Past to the Future of Landfill Engineering Through Case Histories
    Missouri University of Science and Technology Scholars' Mine International Conference on Case Histories in (1998) - Fourth International Conference on Geotechnical Engineering Case Histories in Geotechnical Engineering 08 Mar 1998 - 15 Mar 1998 From the Past to the Future of Landfill Engineering Through Case Histories R. Kerry Rowe University of Western Ontario, London, Ontario, Canada Follow this and additional works at: https://scholarsmine.mst.edu/icchge Part of the Geotechnical Engineering Commons Recommended Citation Rowe, R. Kerry, "From the Past to the Future of Landfill Engineering Through Case Histories" (1998). International Conference on Case Histories in Geotechnical Engineering. 4. https://scholarsmine.mst.edu/icchge/4icchge/4icchge-session00/4 This Article - Conference proceedings is brought to you for free and open access by Scholars' Mine. It has been accepted for inclusion in International Conference on Case Histories in Geotechnical Engineering by an authorized administrator of Scholars' Mine. This work is protected by U. S. Copyright Law. Unauthorized use including reproduction for redistribution requires the permission of the copyright holder. For more information, please contact [email protected]. 145 Proceedings: Fourth International Conference on Case Histories in Geotechnical Engineering~ St. Louis, Missouri, March 9-12, 1998. FROM THE PAST TO THE FUTURE OF LANDFILL ENGINEERING THROUGH CASE HISTORIES R. Kerry Rowe Paper No. SOA-9 Dept. of Civil & Environmental Engineering University of Western Ontario London, Ontario, Canada N6A 5B9 AIISTRACT The advances in landfill engineering are outlined based on a number of case histories illustrating past problems, hydraulic performance of clay liners, diffusive transport through liners, hydraulic containment and clogging of leachate collection systems.
    [Show full text]
  • Alternative Bottom Liner System
    Engineering Report: Appendix C Volume 2 Alternative Bottom Liner System COWLITZ COUNTY HEADQUARTERS LANDFILL PROJECT COWLITZ COUNTY, WASHINGTON Alternative Bottom Liner System COWLITZ COUNTY HEADQUARTERS LANDFILL PROJECT COWLITZ COUNTY, WASHINGTON Prepared for COWLITZ COUNTY DEPARTMENT OF PUBLIC WORKS November 2012 Prepared by Thiel Engineering P.O. Box 1010 Oregon House, CA 95962 Table of Contents 1 INTRODUCTION ................................................................................................................... 1 1.1 Purpose and Scope ......................................................................................................................... 1 1.2 Background .................................................................................................................................... 1 1.3 Proposed Alternative ..................................................................................................................... 2 1.4 Description of GCLs ...................................................................................................................... 3 2 TECHNICAL EQUIVALENCY AND PERFORMANCE ................................................. 5 2.1 The Theory of Composite Liners with Reference to GCLs ....................................................... 5 2.2 Technical Equivalency Issues ....................................................................................................... 6 2.3 Hydraulic Issues ...........................................................................................................................
    [Show full text]
  • Municipal Solid Waste Landfill Operation and Management Workbook
    MUNICIPAL SOLID WASTE LANDFILL OPERATION AND MANAGEMENT WORKBOOK Revised April 2018 Preface In many ways, constructing, operating and maintaining a municipal solid waste landfill is similar to constructing, operating, and maintaining a highway, dam, canal, bridge, or other engineered structure. The most important similarity is that landfills, like other engineered structures, must be constructed and operated in a manner that will provide safe, long-term, and reliable service to the communities they serve. Proper design, construction, operation, monitoring, closure and post-closure care are critical because after disposal the waste can be a threat to human health and the environment for decades to centuries. This workbook is intended to provide municipal landfill operators and managers in Wyoming with the fundamental knowledge and technical background necessary to ensure that landfills are operated efficiently, effectively, and in a manner that is protective of human health and the environment. This workbook contains information regarding basic construction and operation activities that are encountered on a routine basis at most landfills. The basic procedures and fundamental elements of landfill permitting, construction management, monitoring, closure, post-closure care, and financial assurance are also addressed. The workbook includes informative tips and information that landfill operators and managers can use to conserve landfill space, minimize the potential for pollution, reduce operating costs, and comply with applicable rules and regulations. In addition to this workbook, operators and managers need to become familiar with the Wyoming Solid Waste Rules and Regulations applicable to municipal solid waste. The DEQ also provides numerous guidelines that may help understand regulatory requirements in more detail.
    [Show full text]
  • Integration of Resource Recovery Into Current Waste Management Through
    INTEGRATION OF RESOURCE RECOVERY INTO CURRENT WASTE MANAGEMENT THROUGH (ENHANCED) LANDFILL MINING Juan Carlos Hernández Parrodi 1,2,*, Hugo Lucas 3, Marco Gigantino 4, Giovanna Sauve 5, John Laurence Esguerra 6,7, Paul Einhäupl 5,7, Daniel Vollprecht 2, Roland Pomberger 2, Bernd Friedrich 3, Karel Van Acker 5, Joakim Krook 6, Niclas Svensson 6 and Steven Van Passel 7 1 Renewi Belgium SA/NV, NEW-MINE project, 3920 Lommel, Belgium 2 Montanuniversität Leoben, Department of Environmental and Energy Process Engineering, 8700 Leoben, Austria 3 RWTH Aachen University, Process Metallurgy and Metal Recycling, 52056 Aachen, Germany 4 ETH Zürich, Department of Mechanical and Process Engineering, 8092 Zürich, Switzerland 5 Katholieke Universiteit Leuven, Department of Materials Engineering, 3001 Leuven, Belgium 6 Linköping University, Environmental Technology and Management, 58183 Linköping, Sweden 7 Universiteit Antwerpen, Department of Engineering Management, 2000 Antwerpen, Belgium Article Info: ABSTRACT Received: Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimat- 1 November 2019 Accepted: ed 90% of them being “non-sanitary” landfills, predating the EU Landfill Directive of 15 November 2019 1999/31/EC. These older landfills tend to be filled with municipal solid waste and Available online: often lack any environmental protection technology. “Doing nothing”, state-of-the- 23 December 2019 art aftercare or remediating them depends largely on technical, societal and eco- Keywords: nomic conditions which vary between countries. Beside “doing nothing” and land- Landfill mining strategies fill aftercare, there are different scenarios in landfill mining, from re-landfilling the Enhanced landfill mining waste into “sanitary landfills” to seizing the opportunity for a combined resource-re- Resource recovery covery and remediation strategy.
    [Show full text]
  • Geosynthetic Liner Systems for Municipal Solid Waste Landfills: an Inadequate Technology for Protection of Groundwater Quality
    Geosynthetic Liner Systems for Municipal Solid Waste Landfills: An Inadequate Technology for Protection of Groundwater Quality G. Fred Lee, PhD, PE and Anne Jones-Lee, PhD G. Fred Lee & Associates El Macero, California Published in: Waste Management & Research 11:354-360 (1993) Waste Management & Research published a paper by Fluet et al. entitled, "A Review of Geosynthetic Liner System Technology" in its March 1992 issue. The geosynthetic liner system technology that they addressed was an engineered containment system for use in lined "dry tomb" landfills in which are placed untreated municipal solid waste (MSW). The "dry tomb" landfilling approach relies on a cover system to in theory keep the wastes dry and a liner system (liner and leachate collection and removal system) to collect and remove leachate. The performance of a "dry tomb" landfill depends on the functioning of the cover and of the liner system for as long as the wastes represent a threat. The Fluet et al. review suggests to the reader that flexible membrane liner systems of the type being constructed today in municipal solid waste landfills will protect groundwater quality from pollution by landfill leachate. Critical examination of the Fluet et al. (1992) review article, however, reveals that they omitted from their discussion some of the most important topics that need to be considered in an evaluation of the efficacy of landfill liner systems in providing truly long-term protection of groundwater quality. Those neglected topics contribute to the assessment of: whether the liner system will prevent groundwater pollution for as long as the wastes represent a threat to groundwater quality.
    [Show full text]
  • Influence of Bentonite on Clayey Soil As a Landfill Baseliner Materials
    IOP Conference Series: Materials Science and Engineering PAPER • OPEN ACCESS Recent citations Influence of bentonite on clayey soil as a landfill - Vulnerability Assessment of Groundwater Contamination from an Open dumpsite: baseliner materials Labete Dumpsite as a Case study R A Olaoye et al To cite this article: R A Olaoye et al 2019 IOP Conf. Ser.: Mater. Sci. Eng. 640 012107 - A review of the mineralogical and geotechnical properties of some residual soils in relation to the problems of road failures: A case study of Nigeria R O Sani et al View the article online for updates and enhancements. This content was downloaded from IP address 170.106.202.126 on 25/09/2021 at 12:24 1st International Conference on Sustainable Infrastructural Development IOP Publishing IOP Conf. Series: Materials Science and Engineering 640 (2019) 012107 doi:10.1088/1757-899X/640/1/012107 Influence of bentonite on clayey soil as a landfill baseliner materials R A Olaoye 1 O D Afolayan 2 V O Oladeji 1 R O Sani 2 1Department of Civil Engineering, Ladoke Akintola University of Technology (LAUTECH), Ogbomoso, Oyo State, Nigeria. 2Department of Civil Engineering, Covenant University, Ota, Ogun State, Nigeria Corresponding Author: [email protected] Abstract. With the geometric population growth in developing nations comes increase in waste generation, these wastes ranging from industrial to agricultural to municipal solid waste calls for measure for its effective management and disposal so as to preserve the ecosystem. An effective measure of containing this large waste generated, is through the use of landfills which are designed and built to protect infiltration of leachates from decomposed waste to the groundwater.
    [Show full text]
  • Radioactive Waste
    Radioactive Waste 07/05/2011 1 Regulations 2 Regulations 1. Nuclear Regulatory Commission (NRC) 10 CFR 20 Subpart K. Various approved options for radioactive waste disposal. (See also Appendix F) 10 CFR 35.92. Decay in storage of medically used byproduct material. 10 CFR 60. Disposal of high-level wastes in geologic repositories. 10 CFR 61. Shallow land disposal of low level waste. 10 CFR 62. Criteria and procedures for emergency access to non-Federal and regional low-level waste disposal facilities. 10 CFR 63. Disposal of high-level rad waste at Yucca Mountain, NV 10 CFR 71 Subpart H. Quality assurance for waste packaging and transportation. 10 CFR 72. High level waste storage at an MRS 3 Regulations 2. Department of Energy (DOE) DOE Order 435.1 Radioactive Waste Management. General Requirements regarding radioactive waste. 10 CFR 960. General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. Site selection guidelines for a waste repository. The following are not regulations but they provide guidance regarding the implementation of DOE Order 435.1: DOE Manual 435.1-1. Radioactive Waste Management Manual. Describes the requirements and establishes specific responsibilities for implementing DOE O 435.1. DOE Guide 435.1-1. Suggestions and acceptable ways of implementing DOE M 435.1-1 4 Regulations 3. Environmental Protection Agency 40 CFR 191. Environmental Standards for the Disposal of Spent Nuclear Fuel, High-level and Transuranic Radioactive Wastes. Protection for the public over the next 10,000 years from the disposal of high-level and transuranic wastes. 4. Department of Transportation 49 CFR Parts 171 to 177.
    [Show full text]
  • Bioreactor Brochure
    City of Columbia, Missouri Glossary of Terms Questions? Public Works Department Aerobic: living or existing in the presence of oxygen For more information, visit our web page at Airspace: the available space in a cell where trash is placed www.GoColumbiaMo.com (GoLandfill) or call the for disposal Solid Waste Division at 573-874-6290. BIOREACTOR Anaerobic: living or existing in the absence of free oxygen LANDFILL Bioreactor: a controlled landfill or landfill disposal cell MORE INFO: US EPA where liquid and gas conditions are actively managed in WASTE STABILIZATION order to accelerate or enhance biostabilization of waste GENERAL: http://www.epa.gov/garbage/landfill/bioreactors. Biosolids: treated residuals from wastewater treatment htm facilities The City of Columbia Public Works Cell: a contained area of the landfill where waste is SPECIFIC: deposited http://www.epa.gov/epaoswer/nonhw/muncpl/ Department has begun planning for landfill/biowork/index.htm the next sanitary landfill disposal cell. Inorganic: being or composed of matter other than plant As part of this planning process, or animal bioreactor technology is being ACKNOWLEDGEMENTS examined as a means to accelerate LCS: leachate collection system waste biostabilization. We thank the following individuals and Leachate: liquid that filters through MSW organizations for contributions to this brochure. LFG: landfill gas Camp Dresser and McKee Inc. Liner: an engineered impermeable barrier at the bottom of Engineering Consulting Firm the landfill cell to prevent liquid from leaving the landfill University of Missouri Methane: a colorless, odorless, flammable gas produced by Dr. John Bowders decomposition of organic matter Civil Engineering Department MSW: municipal solid waste Organic: relating to or derived from living things (plant or animals), containing carbon compounds City of Columbia Post Closure: covers a regulated (currently 30 years) Public Works Department period after waste is last accepted when the owner is Solid Waste Division financially obligated to maintain the area to the designed P.
    [Show full text]
  • Chapter 7. Best Practices for Landfill Gas Collection System Design And
    7. Best Practices for Landfill Gas Collection System Design and Installation Photo credits: Advance One Development, Inc. and Smith Gardner, Inc. Landfill owners and operators collect landfill gas (LFG) for various reasons, including using LFG for energy, complying with local/state/federal regulations and controlling odors. Regardless of the motivation, owners and operators want to maximize the amount of LFG that is collected while minimizing the amount lost as fugitive or odorous emissions. In general, minimizing fugitive emissions and maximizing collection efficiency improves environmental benefits such as reducing hazardous and greenhouse gas (GHG) emissions and controlling odors and preventing them from migrating off site. Maximizing collection efficiency also improves economic return for LFG energy projects. This chapter provides an overview of design and installation best practices for a planned The federal New Source Performance Standards and gas collection system (GCS). Advantages and Emission Guidelines (NSPS and EG) and National disadvantages of GCS components as well as Emission Standards for Hazardous Air Pollutants considerations are presented. Owners and (NESHAP) for MSW landfills require landfills that operators that install a GCS can use this exceed the established size and emission thresholds information to better understand options to install a well-designed and well-operated gas collection and control system (GCCS). available and to ensure their GCS is robust and well maintained to minimize surface Although the regulations contain specifications for emissions and system downtime. Each best active collection systems and overall operational practice may not be suited for a particular requirements, they are intended to provide flexibility landfill so application must be determined on and allow innovation, recognizing that site-specific a site-specific basis.
    [Show full text]
  • INTEGRATED SOLID WASTE MANAGEMENT for LOCAL GOVERNMENTS a Practical Guide
    INTEGRATED SOLID WASTE MANAGEMENT FOR LOCAL GOVERNMENTS A Practical Guide Improving solid waste management is crucial for countering public health impacts of uncollected waste and environmental impacts of open dumping and burning. This practical reference guide introduces key concepts of integrated solid waste management and identifi es crosscutting issues in the sector, derived mainly from fi eld experience in the technical assistance project Mainstreaming Integrated Solid Waste Management in Asia. This guide contains over 40 practice briefs covering solid waste management planning, waste categories, waste containers and collection, waste processing and diversion, landfi ll development, landfi ll operations, and contract issues. About the Asian Development Bank ADB’s vision is an Asia and Pacifi c region free of poverty. Its mission is to help its developing member countries reduce poverty and improve the quality of life of their people. Despite the region’s many successes, it remains home to a large share of the world’s poor. ADB is committed to reducing poverty through inclusive economic growth, environmentally sustainable growth, and regional integration. Based in Manila, ADB is owned by members, including from the region. Its main instruments for helping its developing member countries are policy dialogue, loans, equity investments, guarantees, grants, and technical assistance. INTEGRATED SOLID WASTE MANAGEMENT FOR LOCAL GOVERNMENTS A Practical Guide ASIAN DEVELOPMENT BANK 6 ADB Avenue, Mandaluyong City 1550 Metro Manila, Philippines 9 789292 578374 ASIAN DEVELOPMENT BANK www.adb.org Tool Kit for Solid Waste Management in Asian_COVER.indd 1 6/1/2017 5:14:11 PM INTEGRATED SOLID WASTE MANAGEMENT FOR LOCAL GOVERNMENTS A Practical Guide Improving solid waste management is crucial for countering the public health impacts of uncollected waste as well as the environmental impacts of open dumping and burning.
    [Show full text]
  • Compaction Characteristics of Municipal Solid Waste James L
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by DigitalCommons@CalPoly Compaction Characteristics of Municipal Solid Waste 1 2 James L. Hanson, Ph.D., P.E., M.ASCE ; Nazli Yesiller, Ph.D., A.M.ASCE ; Shawna A. Von Stockhausen, 3 4 P.E., M.ASCE ; and Wilson W. Wong, A.M.ASCE Abstract: Compaction characteristics of municipal solid waste �MSW� were determined in the laboratory and in the field as a function of moisture content, compactive effort, and seasonal effects. Laboratory tests were conducted on manufactured wastes using modified and 4X modified efforts. Field tests were conducted at a MSW landfill in Michigan on incoming wastes without modifications to size, shape, or composition, using typical operational compaction equipment and procedures. Field tests generally included higher efforts and resulted in higher unit weights at higher water contents than the laboratory tests. Moisture addition to wastes in the field was more effective in winter than in summer due to dry initial conditions and potential thawing and softening of wastes. The measured parameters in the � / 3 � / 3 laboratory were dmax-mod =5.2 kN m , wopt-mod =65%, dmax-4�mod =6.0 kN m , and wopt-4�mod =56%; in the field with effort were � / 3 � / 3 � dmax-low =5.7 kN m , wopt-low =70%; dmax-high =8.2 kN m , and wopt-high =73%; and in the field with season were dmax-cold / 3 � / 3 =8.2 kN m , wcold =79.5%, dmax-warm =6.1 kN m , and wwarm =70.5%.
    [Show full text]
  • Environmental Management of Landfill Facilities
    Environment Protection Authority Environmental management of landfill facilities Solid waste disposal South Australia Environmental management of landfill facilities – solid waste disposal This guideline supersedes and replaces the Environmental management of landfill facilities (municipal solid waste and commercial and industrial waste) [EPA 2007]. Any reference to the 2007 guidelines in any statutory instrument or other publication should now be read as a reference to the Environmental management of landfill facilities – solid waste disposal (EPA 2019). For further information please contact: Information Officer Environment Protection Authority GPO Box 2607 Adelaide SA 5001 Telephone: (08) 8204 2004 Facsimile: (08) 8124 4670 Free call (country): 1800 623 445 Website: https://www.epa.sa.gov.au Email: [email protected] ISBN 978-1-921125-34-8 Issued December 2007 Updated April 2019 Disclaimer This publication is a guide only and does not necessarily provide adequate information in relation to every situation. This publication seeks to explain your possible obligations in a helpful and accessible way. In doing so, however, some detail may not be captured. It is important, therefore, that you seek information from the EPA itself regarding your possible obligations and, where appropriate, that you seek your own legal advice. © Environment Protection Authority This document may be reproduced in whole or part for the purpose of study or training, subject to the inclusion of an acknowledgment of the source and to it not being used for commercial purposes or sale. Reproduction for purposes other than those given above requires the prior written permission of the Environment Protection Authority. Contents Abbreviations ...................................................................................................................................................................... 1 1 Introduction ..................................................................................................................................................................
    [Show full text]