DOCSLIB.ORG

Upper Extremity Prosthetics Index

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Upper Extremity Prosthetics Index UPPE Upper Extremity Prosthetics Index 5V Battery Pack with Batteries . 116 Prosth R 5V Remote Battery Pack . 116 E X 5X-Ti Hook . .7 tr E T E 6V Modular Battery Pack . 116 I M cs I Adjustable Hanger . 96 ty Alternating Lock Elbow . 106 Anchor Plates . 97 APRL Child Flexion Wrist . 62 APRL Sheave (Excursion Amplifier) . 99 APRL Voluntary Closing Hook . 8 Arm Frames . 66 Axilla Loop Pads . 101 Baby Mitt . 18 Ball Receivers . 94 Ball Terminals 3/16" . 94 Ball Terminals 9/32" . 94 Base Plates . 94 Baseball Glove Attachment . 13 Battery-External . 118 Battery-Internal . 118 Battery Chargers . .116 Below Elbow Hinge Spacer Kit . 88 Bowling Attachment . 13 Buckles . .101 Bulk Cuff Material . 102 Button Hook . 10 Cable, Swaged Rolls . 93 Cable for Control Unit . 118 Cable Housing Anchors . 93 Cable Housing and Housing Liner . 93 Cable Housing Cover . 93 Cable Kits . 95 Cable Shackle . 95 Cable Slack Adjuster . 92 Cable Swaging Tool . 93 CAPP Multi-Position Post . 10 Centri Electrode . 118 Child CAPP Hand . 22 Child Crawling Prosthesis . 19 Child Dorrance 200 Mechanical Hand . 21 Child Myoelectric Hand . 23 Child Passive Hand . 20 Cineplasty Kit . 102 Color Swatch Kit for Dream Skin and Gloves . 55 Connecting Pin . 122 Control Cable Insulator . 95 Control Systems . 110 Control Unit . 118 Cosmetic Arm Terminal . 99 Cosmetic Cover Kits . 108 Cross Bars . 97 Custom Fabrication Technical Services . 104 Deluxe Forearm Lift Assembly . 98 Distal Attachment Rings . .107 FILLAUER LLC: 800 .251 .6398 • HOSMER: 800 .827 .0070 • CENTRI®: +46 8 505 332 00 • CENTER FOR orthotICS DESIGN: 800 .346 .4746 1 ty I Dorrance Hand Fairings . 55 cs M I E T Driving Ring . 10 E tr Dual-in-Line 5V Remote Battery Pack . .116 X E E-200 Elbow . 72-73 R Prosth E-400 Elbow . 70-71 UPPE E-50 Elbow . 74-75 E-Z Hook Tension Band Applier . 11 Economy Wrist . 65 Economy Wrist With Straps . 66 Elbow Lock Cable Hanger . 96 Electric Accessories . 117 Endoskeletal Elbow . 106 Endoskeletal Electric Elbow . 106 Female Dorrance 300 Mechanical Hand . 32 Female Myoelectric Hand . 34 Female Passive Hand . 27 Female Passive Hand-Long Sleeve . 28 Female Robin-Aids Soft Mechanical Hand . 29 Female Soft Voluntary Closing (SVC) Hand . 30 Female Soft Voluntary Opening (SVO) Hand . 31 Flail Arm Hinge, Locking Adjustable Lift Assist . 85 Flail Arm Hinge, Locking Spring Loaded . 83 Flail Arm Hinge, Non-Locking . 84 Flare Adapter for Endoskeletal Elbow . 107 FM Quick Change Wrist . 57 Forearm Lengthener . 11 Forearm Lift Assembly . 98 Forearm Lift Assist Unit . 77 Forearm Lift Kit . 107 Four Function Wrist . 67 Friction Disconnect Wrists . 64 Friction Elbow . 76 Friction Wrist . .107 FW Flexion Friction Wrist . 63 Grooved Stem . 122 Hand Cuff . 56 Hand Plate . 121 Hangers . 96 Upper Extremity Prosthetics Index Heavy Duty Harness . 100 Hook Fairing . 11 Hook Measuring Guide . .9 Hook Retread and Repairs . .9 Hook Rings . 11 Hook Tension Bands . 11 Hook Tension Springs . 11 Hook to Cable Adapter . 99 Hosmer Metal Flexible Hinges . 89 Housing Cross Bar Assembly . 97 Inner Shell for Electric Hands . 118 Leather Cross Bar . 97 Leather Hinge Kit . 89 Li-Ion Power System Battery . 116 MA210 Stud Kit . 88 Male APRL Voluntary Closing Hand . 53 2 FILLAUER LLC: 800 .251 .6398 • Hosmer: 800 .827 .0070 • CENTRI®: +46 8 505 332 00 • CENTER FOR orthotICS DESIGN: 800 .346 .4746 UPPE Upper Extremity Prosthetics Index Male Becker Imperial Hand . 52 Prosth R Male Becker Lock Grip Hand . 46 E X Male Dorrance 400 Mechanical Hand . 47 tr E T E Male Myoelectric Hand . 48 I M cs I Male Passive Hand . 42 ty Male Robin-Aids Soft Mechanical Hand . 43 Male Sierra Voluntary Opening Hand . 54 Male Soft Voluntary Closing (SVC) Hand . 45 Male Soft Voluntary Opening (SVO) Hand . 44 Manual Lock Elbow . 106 Michigan Electric Hook . 114 Model 10P-Child Size Hook . .7 Model 10X-Child Size Hook . .7 Model 12P-Child Size Hook . .7 Model 3 - Work Hook . ..
Load more

Recommended publications
  • March 2007 No. 126 Chaff from the President
    The Disp ays from Chat+anooga page 4 I Committee ~eports page 6 fo Raise Children's Confidence, Teach page 10 Collection Spotlight page ~ 2 Update for Stanley No. 120 Block Plane page • 8 Stanley No. 164 Low Angle Block P1are page 26 I M-WTCA Auxiliary page 30 A Pub · cation of the M" d-West Tool Col ectors Association What's It page 35 M-WTCA.ORG Teaching Children About 'lbols story begin:::; on page 10 March 2007 No. 126 Chaff From The President Its spring and time to think about the your horizons by taking in the architecture, art, all the things you and your partner decorative arts, and fine food. Make some new friends, can do to maximize your enjoyment and share experiences with old friends along the way. and the fun you can have in the wonderful world of tool collecting. Hopefully you travel together and share the fun of visiting new places, and experiencing the wonders the world has to offer. Perhaps you enjoy seeing the magnificent creations in architecture, sculpture, and painting produced in different places and during different historical periods. Perhaps you prefer the decorative arts, furniture, textiles, and smaller artifacts, such as tools of the many trades and crafts, which have been refined and perfected over centuries to improve our way of life. Along the way you might enjoy an occasional meal in a splendid It might also be a good time to re-evaluate your restaurant that serves marvelous cuisine. Whatever collection. Have your interests changed? Do you need your tastes, it is the fun of doing it, and the overall to refocus, improve the way your collection is displayed, broadening of your experience of life that matters.
    [Show full text]
  • ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd
    5th Annual ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd. St. Charles (St. Louis), Missouri 63304 (preview Friday from 2 to 6:30 PM & Saturday 6:30 to 9:30 AM) We have 550+ lots or more of quality antique tools including wooden and iron planes; saws; levels; layout tools; screwdrivers; boring tools; wrenches; leather tools; and several household antiques and kitchen collectibles. 001._____ Stanley #5 30-inch plumb & level with laminated stock, brass corners and top plates, decorative brass side views for level vial, SEPT 1867 patent date stamped into wood, very good overall. 002._____ Pair of Stanley levels: 28 5/16-inch Stanley #3 with brass end and top plates, both vials intact, very good overall; plus a 28-inch #3 SW logo, both vials intact, partial decal on top, very good overall. 003._____ Pair of levels: 28-inch Stanley #0, one corner chipped, otherwise intact and very good; plus a 26-inch Stratton Brothers No. 1 brass bound, numerous nicks and dings, both vials intact, with a good scraping, this one will be very good. 004._____ Pair of Stanley levels: 26-inch brass bound No. 21, both vials intact, very good overall; plus a 24-inch No. 3 SW logo, both vials intact, fine overall. 005._____ Ohio Tool Co. 03C iron smooth plane, fine iron marked OHIO TOOL THISTLE BRAND AUBURN NEW YORK, nice original tote and knob, very good overall. 006._____ Winchester #3091 iron block plane with screw operated blade adjuster, nice original WINCHESTER blade, very good overall.
    [Show full text]
  • Pup Date Edrs Price Identifiers Document
    DOCUMENT RESUME VT 011 536 ED 042 041 08 Maley, Donald AUTHOR of TITLE The Implementation andFurther Development Experimental Cluster Conc2.ptPrograms Through Testing and EvaluationIncluding Placement and Follow-Up of Subjects.The Cluster ConceptProject, Phase IV. Final Report. Maryland Univ., CollegePark. INSTITUTION Washington, D.C. Pureau SPONS AGENCY Office of Education (DHEW) , of Research. BUREAU NO PR-7-0853 PUP DATE Aug 69 GRANT OEG-0-8-000853-1P65(085) NOTE 382p. EDRS PRICE FDRS Price MF-$1.50HC-$19.20 DESCRIPTORS Building Trades, CognitiveAbility, *Curriculum Development, ElectricalOccupations, *Experimental Programs, Grade 12,Metal Working Occupations, *Occupational Clusters,Pilot Projects, Program Descriptions, *ProgramEvaluation, Psychomotor Skills, *Trade andIndustrial Education,Vocational Interests IDENTIFIERS CCP, Cluster ConceptProgram ABSTRACT The Cluster Concept Program(CCP) for 11th and12th education, has completedits second year. ThE grade vocational capability in a program is designedto prepare youthfor entry level specific occupation. A variety of relatedoccupations rather than a pretest/posttest researchdesign, with control andexperimental group design in ccnstructioncluster groups, metalfabrication cluster used to obtain an groups, andelectromechanical cluster groups was estimate of the effectivenessof the programs. It wasfound that in some schools the programsdid significantly changethe student behaviors in the directionof the state objectivesof the programs. Changes in cognitiveabilities, broadenedknowledge
    [Show full text]
  • Stagecraft 1 -Tools Flashcards | Quizlet
    Stagecraft 1 -Tools 123 terms by kj22333 Like this study set? Create a free account to save it. Create a free account Claw hammer framing hammer Tack hammer Ball peen hammer staplegun Self retracting hand tape measure Framing square Try Square Combination Square Speed square Spirit Level Bevel Gauge or Sliding T-Bevel Chalk Line Plumb Bob Trammel Points Hand Saw Back Saw Coping Saw Keyhole Saw Hack Saw Wood Plane Draw knife Wood Rasp File Tin Snips Diagonal Cutters Bolt Cutters Wood Chisel Cold Chisel Utility knife (Mat knife, x-acto knife) Box End Wrench Open Ended Adjustable Wrench (Crescent or C-wrench) Pipe Wrench c-clamp Parallel Jaw Clamp Jorgenson clamp Bar Clamp Crow Bar claw foot Slotted Screw Driver Phillips Screw Driver Portable Circular Saw Power Miter Saw Cordless Drill Jig Saw Router Band Saw Table Saw Straightedge t-square caliper compass miter guide tape measure saw protractor contour gauge scribe cross cut saw wider kerf crosscut saw teeth rip tooth blade/saw dovetail saw carpenters hatchet wire strippers paint scrapper electrical cable cutters sureform rat tail rasp can cut a hole/ shape a hole Racketing brace hand drill auger bit twist bit not very good at removing sawdust pilot bit countersink bit spade bit carbide bit good for concrete and plaster hole saw allen wrench set Yankee screwdriver screws as you push downward hammer staple gun nail set mallet nut driver pipe clamp vice wood vice spring clamp band clamp welding clamp vise grip lineman's pliers channel lock pliers/ slip joint lock pliers crimping tool needle nose pliers slip joint pliers nail puller socket wrench open end wrench pry bar tack remover grommet set rivet gun whetstone hot glue gun tubecutter die holder anvil pipe cutter center punch die tap conduit bender regulator pallet staple gun Nail gun Air ratchet/ grinder radial arm saw steel band saw drill press scew shooter angle grinder palm sander belt/disk sander random orbital sander best sander.
    [Show full text]
  • April-2019.Pdf
    2 INDEX This Months Buyers Guide At a Glance Page Page 03 New Arrivals 41-42 Bayonet Globes 04-12 Automotive Tools 44-46 Headlight Globes 12-13 Boss Kits 46 HID Ballasts 13-16 Steering Wheels 46-47 HID Globes 16-24 Abrasives 47 HID Kits 25 First Aid Kits 48-50 Gear Knobs 26 Fishing 50 Tail Pipes 26-28 Screwdrivers 51-53 Seat Covers 29-30 Spanners 53-55 Trailer Accessories 31 Sockets 55-56 Jockey Wheels 32-33 Pressure Sprayers 56 Hooters 34-36 Sockets 56-58 Air, Fuel & Oil Filters 36 Gaskets 58-59 Fuel Caps 36 U-Joints 59 Oil Caps 37-39 Universal Spares 59-60 Radiator Caps 39-40 Globe Holders 61 Car Mat Sets 40 Dash Board Globes 62-63 Measuring Tools 41 Fog Globes 64 Torches 41 Festoon Globes NEW ARRIVALS 3 2Ton Scissors Jack With Ford Ranger Grille With LED RANGER Handle Weight 3.3Kg 3 Colour Modes, Red, Orange And Max Hieght=385mm Flashing Red MMB2000 T7 Ranger D9-FR1525 Grille With Black Letters With LED’s Grille With Red Letters With LED’s Ranger 2015- Ranger 2015- (On Grille Ranger Lettering) (On Grille Ranger Lettering) D9-FR1528B D9-FR1528R Grille With White Letters With LED’s Tail Gate Spoiler For Hi-Lux Ranger 2015- 2015- (On Grille Ranger Lettering) D9-H1535 D9-FR1528W 3/4" Drive Strong Bar Chrome Vanadium T3-105-500 4 AUTOMOTIVE TOOLS Induction Timing Light Induction Timing Light With Twin Cam Locking Tool TA-1200 Advance And Retard T1-183-1 TA-2200 Mechanic's Fender Cover 1200X1000mm Mechanic's Mechanics Sonar Scope Tool 790x590mm Fender Cover J411 A10-002S A10-002 Stainless Steel Band Tool For Brake Pad Spreader Universal Stud
    [Show full text]
  • Tools and Fixings for Donation
    Tooling and Fixings donation Ian and Patricia Wells Gillingham KENT United Kingdom A donation of tools and fixings is offered to a suitable charitable project. This report provides a detailed inventory and photographs of the items that are offered. All items are fully serviceable with the exception of an 18” Yankee Screwdriver which needs repair in order to make it fully serviceable. IMPORTANT NOTE: Receiving charity would need to make arrangements to collect the items from the address above. 1 Tool Chest and tray: Name Location Picture (if applicable) Stanley Brace Box 1 and 2 Brace bits x 15 Box 1 and 2 Brace drills x 6 Box 1 and 2 Stanley 90° Brace Box 1 and 2 Expanding Brace Bit Box 1 and 2 Carpenters Mallet Box 3 4 x Block Planes Box 3 Carpenters square 6” Tray 3 2 x 12” G Clamps Box 4 2 x 5” G Clamps Box 4 3 x Zip bits Tray 4 1 x Carpenters Plane Box 5 6” Carpenters Vice Box 5 2” Engineers Vice Box 5 2 x Claw hammers Box 5 x 2” G clamps Box Stanley ¼” hand drill Box 2 x Tenon saws Tray 5 Stanley Spoke-shave Tray 5 2 x Carpenters’ saws Tray 6 Scribing Block (for wood) Tray 6 Rivet Gun + 200 rivets Tray 6 4 x carpenters’ chisels Tray 6 3 x bradawls Tray 6 3 x wire cutters Tray 6 2 x pliers Tray 6 1 x long nose pliers Tray 6 1 x nail remover Tray 6 Plumb bob Tray 7 Screwdrivers x 20 qty Box 7 Stanley knife Tray 7 18” Wrecking bar Tray 7 Stanley “Yankee“ screwdriver x 18” long Tray 7 (direction selector needs repairing) Stanley “Yankee“ screwdriver x 12” long Tray 7 Tyre Pressure Gauge Tray Small adjustable spanner Tray 7 Separate Items
    [Show full text]
  • For the 11Th Grade. a Pretest-Post Test Duster Groups Was Used to Estimate
    DOCUMENT RESUME VT 007 031 ED 022 965 . 08 By- Maley, Donald; Mietus, Walter S. THE INPLEKNTATION AND FURTHERDEVELOPMENT OF EXPERIMENTAL CLUSTERCONCEPT PROGRAMS THROUGH ACTUAL FIELD TESTING ANDEVALUATION AT THE SECONDARY SCHOOLLEVEL. THE CLUSTER CONCEPT PROJECT. PHASE III. INTERIM REPORT.- Spons Agency-Office of Education (DI-EW),Washington, D.C. Bureau No- BR- 7-0853 Pub Date Aug 68 Grant-OEG-0-8-000853-1865(085) Note 438P. FORS Price MF-S1.75 HC-S17.60 Descrrors-ACHEVEMENT TESTS, BUILDINGTRADES, COGNITIVE ABILITY,COMPARATIVE ANALYSIS, CONWa. GROUPS, *CURRICULUM DEVELOPMENT,ELECTRICAL OCCUPATIONS, EXPERIMENTALGROUPS, *EXPERMTAL PROGRAMS, GRAM 11, HIGHSCHOOL STUDENTS, METAL WORKINGOCCtPATIONS, *OCCUPATIONAL CLUSTSRS, PILOT PROJECTS,PROGRAM DESCRIPTIONS, *PROGRAMEVALUATION, QUESTIONNAIRES, *TRADE AND INDUSTRIAL EDUCATION,VOCATIONAL INTERESTS Identifiers- CCP, Cluster Concept Program, Maryland The Cluster Concept Program invocational education, a programfor the 11 th and 12th grades, is designed to prepareyouth for entry level capability in avariety of related occupations rather than a specific occupation.Phase III of research with the program was theevaluation of the first year of experimentationwith the programs for the 11th grade. A pretest-post testresearch design with fourconttol and four experimental construction cluster groups,four control and threeexperimental metal fabrication duster groups, and three controland three experimentalelectromechanical duster groups was used to estimatethe program effectiveness.Newly developed measurement
    [Show full text]
  • Study Guide: Hand Tools
    STUDY GUIDE: HAND TOOLS Learning Objectives: • The features and benefits of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Fastening Tools Module 1: Hammers Product Knowledge: Claw Hammer • Use for general carpentry, household chores and nail pulling. • Curved claw offers leverage in removing nails. • Use only with non-hardened, common or finishing nails. • You can choose 16 or 20 oz. weights for general carpentry. For fine cabinetry or light- duty driving, choose 7, 10 and 13 oz. nail weights. • Available with a smooth face for finishing jobs, or a waffled face for more control when hammering large nails into lumber. Framing (Rip) Hammer • Use for ripping apart wooden components and demolition work. • Use only with non-hardened, common or finishing nails. • Choose weights from 20 to 32 oz. for framing and ripping. • Available with milled or waffled faces to grip the nail head and reduce the effect of glancing blows and flying nails. Ball Peen (Ball Pein) Hammer • Use with cold chisels for riveting, center punching and forming unhardened metal work. • Striking face diameter should be about 3/8” larger than the diameter of the head of the object being struck. • Popular sizes are 12 and 16 oz. • Variations include a cross-peen hammer (with a horizontal wedge-shaped face) and a straight-peen hammer (with a vertical wedge-shaped face). Sledgehammer • Use for jobs that require great force, such as breaking up concrete or driving heavy spikes.
    [Show full text]
  • Wood, Fasteners and Tools Lesson #5: Nails
    Unit Four: Wood, Fasteners and Tools Lesson #5: Nails Objectives Students will be able to… . Understand the meaning of glues, nails, and screws. Common Core Standards Cabinetmaking and Wood Products Pathway A1.4, A1.7, A2.1, A2.2, A3.1, A2.3, A6.1, A6.2 A3.4, A6.7, A4.1, A5.1, A5.2, & A5.4 Residential and Commercial Pathway D2.1, D2.2, D3.1, D3.3, & D4.1 Reading 11-12.4 Writing 11-12.1 RIST 11-12.2 Problem Solving/Critical Thinking 5.4 Health and Safety 6.2, 6.3, 6.6, & 6.12 Responsibility and Leadership 7.4 & 9.3 Demonstration and Application 11.1 Technical Knowledge and Skills 10.1, 10.2, & 10.3 Materials Glues, Nails, and Screws Handout Glues, Nails, and Screws Worksheet Lesson Sequence . Read the glues, nails, and screws handout as a class. Answer any questions that may come up along the way. (15-20 minutes) . Have students answer the glues, nails, and screws questions on the worksheet in partners. (15-20 minutes) . Review the answers to the questions as a class. (10 minutes) © BITA: A program promoted by California Homebuilding Foundation BUILDING INDUSTRY TECHNOLOGY ACADEMY: YEAR ONE CURRICULUM Assessment Collect student’s charts they filled in and use this data to determine if students understand the material. Check for understanding by questioning and calling on random students. Accommodations/Modifications One-on-One Support Provide A Chart Already Filled in For Students Strategic Pairing Highlight Important Information on Handout © BITA: A program promoted by California Homebuilding Foundation BUILDING INDUSTRY TECHNOLOGY ACADEMY: YEAR ONE CURRICULUM Glues, Nails, and Screws Handout There are a variety of methods we have at our disposal to fasten different pieces of wood together.
    [Show full text]
  • Number 8 Trumbull Edition February 25, 2021 Trumbull Free Press 814-638-0114 February 25, 2021 Page 2
    VOLUME 42 - NUMBER 8 TRUMBULL EDITION FEBRUARY 25, 2021 TRUMBULL FREE PRESS 814-638-0114 FEBRUARY 25, 2021 PAGE 2 AUCTIONS! AUCTIONS! AUCTIONS! PUBLIC AUCTION UPCOMING AUCTIONS WEDNESDAY MARCH 3, 2021 •Sat. March 20th at 10 AM: MILLER’S CONSIGNMENT AUCTION 4:30 P.M. SHARP Absolute Real Estate & Contents Auction 2nd SATURDAY OF EACH MONTH Will Sell The Following Personal Property Of Very well kept and updated 3 bedroom mobile STARTING MARCH 13TH @ 9:00 A.M. Chester D & Barbara Byler At Mespo Expo, home w/ 28’ x 32’ 2 car garage situated on a 4275 Kinsman Rd (Rt87), Mesopotamia, Ohio, .642 acre lot, located at Located 4177 US Hwy 19. Cochranton, PA 44450, Trumbull County. Located Just East 10932 Culver Dr. Meadville, PA Consigning:Farm Equipment, Lawn & Garden, ATV’s, Of Rt 534 On Rt 87 To Facility On North Side. •Sat. April 3rd at 1 PM: Watch For Pete Howes Auction Service Or- Absolute Commercial Real Estate Auction Shop Equipment, Tools and much more. ange Signs. 6,700 +/- sq. ft. commercial building w/ 3 phase Drop off times will be Monday-Friday from 12pm-6pm the ********WILL SELL A FIREARM EVERY 10 - 15 elec., natural gas heat, modern offices, loading week of the auction. All other times by appointment only. MINUTES STARTING AT 4:45 PM********* dock, shop/production & customer service ar- AUCTION HELD INSIDE HEATED BUILDING! eas, blacktop customer parking & large employ- Drop off for March 13th Auction is FIREARMS, FISHING AND MISC: Winchester ee parking area. Sale also includes residential Monday March 8th-Friday March 12th ~ 12pm-6pm Model 70 7mm Rem Mag Bolt W/3x9x40 Bur- duplex with current tenant.
    [Show full text]
  • Splitpart5-3.Pdf
    FOR MORE INFORMATION PLEASE VISIT OUR WEBSITE www.kvsengineer.com (click the link to direct to the site) 02-214-0101 GROUP 569 RIVETING TOOLS Heavy Duty Lever Action Riveter Produces strong, vibration proof joints effortlessly. Replaces screws, bolts, ordinary rivets, brazing, soldering and welding. Moulded comfort grip. Long nose design, ideal for use in recessed areas. With enamelled steel body with storage for four nozzles and quick change wrench. Spare Jaws Weight Order Code Price/1 Contents each KEN-569 TB Set of 2 10g -9100K 45.00 Supplied with the following sizes of nozzle: Spare Nozzles 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”) Nozzles Weight Order Code Price/1 and 4.8mm (3/16”). Diameter each KEN-569 TB 2.4mm 10g -9020K 89.00 Overall Weight Order Code Price/1 3.2mm 10g -9030K 89.00 Length each KEN-569 TB 4.0mm 10g -9040K 89.00 260mm 840g -3000K 773.00 4.8mm 10g -9050K 89.00 Rivet Nut Inserter Model RNI410 This sturdy professional quality tool has been designed for the insertion of rivet nuts into sheet metal. It has a cast body with a corrosion-resistant powder-coated finish, heavy-duty steel levers with soft grips for user comfort and a knurled adjustment ring for material thickness setting. It also has a pump action mandrel turning shaft for quick loading of fasteners. Includes: Set of five nose piece kits, M4, 5, 6, 8 and 10 plus instruction manual. HAND TOOLS Group Spare Nose Piece Sets Order Code Price/1 644 Contents KEN-569 TB M40 -9300K 567.00 Nozzles Order Code Price/1 M50 -9310K 567.00 Supplied KEN-569 TB M60 -9320K 567.00 M80 -9330K 567.00 M4, 5, 6, 8 & 10 -3080K 7777.00 M10 -9340K 567.00 Rivet Nut Attachment This attachment has been specifically designed to insert rivet nuts into sheet metal.
    [Show full text]
  • Hans Brunner Tool Auctions June 22, 2012
    Hans Brunner Tool Auctions June 22, 2012 PO Box 5238, Brassall Qld 4305 www.hansbrunnertools.gil.com.au 07 3294 8253 Vol 21 Antique Tools & Parts Sales in March, June, Sept & Dec - to subscribe to free catalogues please write or email. The low estimate is the reserve – I accept any amount on or over the reserve. Send in your bids anytime. Deadline is 12.00 noon on auction day. The highest offer wins. If identical bids are received on a lot the first one in is the winner. I’ll invoice you the day after the sale. Postage is extra I rate the condition of the lots from P (poor) Fr (fair) G (good) G+ (very good) to F (fine) 2 1 Double-sided shifting spanner by Crescent. Very minor 2 Butcher’s steel marked Nichols Bros. Steel is rust, no pitting. 8” 14” long, overall with handle 19.5” G $ 15-30 1 long. G+ $ 30-60 3 4 Super clean Greenlee 8” drawknife in the 4 English style with a 3 Stanley 36 ½ L one foot box- wood rule straight back. Minor chip with calliper. Minor nick above the 1 inch on one handle. G+ 30-60 mark. G $ 15-30 5 Very collectable Junior Shell tin for 6 cleaning/lighter fluid. Very good graphics on all sides. This model 6 Brass powder flask made in Italy. 9 never had a handle. ½” long. No attempt was made to 7 5 3” x 1 ¾” x 3 ¾”. G+ artificially age this flask – even though 30-70 it’s not new.
    [Show full text]