DOCSLIB.ORG

Submission Example 2018 Award Winning Entry by 4240

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Submission Example 2018 Award Winning Entry by 4240 SUBMISSION EXAMPLE 2018 AWARD WINNING ENTRY BY 4240 ARCHITECTURE All entries must be anonymous. Entrants’ names and/or firm names should not appear anywhere in the portfolio The Boundary at Moreland Village Palmetto Bluff, South Carolina Architecture - Commercial / Civic / Institutional Complete 2017 17,780 sf The Boundary Nestled between the village green, wetland preserve, and Old Moreland Road, The Boundary condenses the needs of several buildings into one. This consolidation of program was driven by the desire to touch the land lightly, preserving the natural environment and connecting people to the out of doors. The classical-inspired cross-axial plan organizes the building and adjacent outdoor spaces into four components with each wing of the building serving a distinct purpose. Views of the marsh were paramount and dictated the location of the restaurant wing and pool terraces. Lowcountry architecture is a clear derivation of American colonial architecture, evolved over the past three centuries to address this unique southern region and microclimate. Inspired by the Lowcountry architectural aesthetic, the roof forms maintain a simple, classical aesthetic that are reflective of the spaces within. The buildings directly respond to the subtropical climate with one- room wide buildings elevated above the flood plane to capture breezes and views. Expansive porches with deep overhangs provide shelter from the sun and inclement weather. Exposed rafter tails, vertically proportioned windows, cypress wood board on board vertical siding, plank railings and tabby walls give the building a unique and individual character, expressive of craft with materials faithful to the region. Interiors were designed with a fresh contemporary aesthetic - exposed wood timbers, penny-gap plank siding, vaulted ceilings with open trusses and reclaimed wide plank hard wood floors to instill a sense of withstanding time, while expressing the simplicity and quality found in more contemporary lifestyles and living. The Boundary Master Site 6 5 2 1 4 3 1. The Boundary 2. Lap Pool 3. Family Pool/Pavilion 4. The Crossroads 5. Bike Barn 6. Outfitters/ Conservancy Aerial View of Site The Boundary 16 15 14 12 11 13 17 10 9 8 7 6 LEGEND 1. Entry 2. Treehouse 3. Lap Pool and Cabanas 4. Cardio/Weights 5. Pool Equipment/Storage 6. Dining 7. Lounge 8. Bowling/Event Space 5 4 3 9. Fitness Studio 10. Bike Barns 11. Smoke House 12. Breezeway 18 13. Kitchen 14. Game Room 15. Utility Room 2 16. Screened Porch 17. Bike Rental 18. Family Pool First Level Floor Plan 0 15 30 The Boundary 1 3 4 1 LEGEND 1. Open to below 5 2. Treehouse 3. Art Loft Overlook 4. Pottery Studio 5. Washroom 6. Flex Space 6 Second Level Floor Plan 0 15 30 SOUTH The Boundary WEST EAST East Entry Elevation 0 15 30 60 The Boundary SOUTH WEST West Elevation 0 15 30 60 EAST The Boundary SOUTH South Elevation 0 15 30 60 WEST EAST The Boundary View Of Restaurant Wing From Pool Terrace The Boundary View Of Restaurant Wing The Boundary Family Pool Pool Pavilion View from Community Green The Boundary Adult Pool & Cabanas Breezeway Connector The Boundary A preserved southern oak tree creates a Entry Porch focal feature to the entrance porch. The Boundary Marsh Overlook Tree House Branch Detail The Boundary Inspired by the high-ceiling regional barns, Game Room the game room was designed to have an exposed timber structural system for the walls and ceilings. The Boundary Game Room The Boundary GAME HALL: Game RoomFIGURE 1 GAMEDetails HALL: SECTION PERSPECTIVE FIGURE 1 GAME HALL: B. SECTION DETAILS C. PLAN DETAIL (1-E) MECHANICAL, ELECTRICAL, & SPRINKLER CHASE ROOF PURLIN 3X8 RAFTER TAIL AT EA TRUSS TOP CHORD, NOTCH AROUND TRUSS TOP CHORD & ATTACH W/ (3) “ DIA. X 6” SDS SCREWS 1-D 3/4” PLYWOOD ROOF SHEATHING 5 V CRIMP METAL ROOFING, HIGH-TEMP ROOFING UNDERLAYMENT, 5/8” PLYWOOD SHEATHING VENTED NAILBASE INSULATION STAINED WOOD STAINED 1X6 T&G SHEATHING AT OVERHANGS TRUSS BEYOND 1-D ACOUSTIC BATTING, SCRIM, STAINED 1X4 WOOD PLANK CEILING 1-E TRUSS BOTTOM CHORD ATTACHED W/ (3) 1/4” DIA. X 6” SDS SCREWS COUNTERBORE & PLUG STAINED 5/4X3 CYPRESS BATTEN STAINED 5/4X12 CYPRESS SIDING FLITCH PLATE TO EXTEND TO TOP OF TRUSS TOP CHORD, ATTACHED TO TRUSS TOP CHORD DRAINAGE MAT OVER FLUID APPLIED 1/2” DIA. A307 BOLT @ 24” OC, AIR BARRIER COUNTERBORE & PLUG 5/8” EXTERIOR PLYWOOD 2 1/2” BOARD INSULATION W/ ELECTRICAL RACEWAY EXTERIOR 4X6 EDGE PURLIN, ATTACH TO RAFTER TAIL W/ 3/8” DIA. X 8” 1-C LAG SCREW ALUM CLAD DRAINAGE MAT WOOD DOORS W/ CONCEALED SEALANT SHEET METAL FLASHING WIND GIRT W/ CONCEALED CONNECTION TO COLUMN; STEEL TEE PLATE CONNECTION W/ RECESSED & PLUGGED BOLTS 1-C SHEET METAL FLASHING W/ CLOSURE 2X6 WD PURLIN FLITCH PLATE COLUMN BEYOND STAINED PENNY GAP 1X6 T&G SIDING STAINED 5/4 WD TRIM STAINED 4X6 WALL FRAMING INTERIOR 1-E 5/8” STRUCTURAL PLYWOOD SHEATHING 1-E STAINED 2X4 WALL FRAMING 1-B STAINED EXTERIOR BOARD & BATTEN SIDING, AIR BARRIER, 5/8” RECLAIMED HEART PINE DRINK RAIL, EXT. PLYWOOD, 2 1/2” RIGID INSULATION, 5/8” EXT. PLYWOOD, SCRIBE TO FRAMING & WALL SIDING RECLAIMED HEART PINE DRINK RAIL, SCRIBE 1X6 T&G SIDING TO COLUMN, FRAMING & SIDING FLITCH PLATE COLUMN (2) 4X10 S4S STAINED WOOD MEMBERS BOLTED TO 8”X1/2” STEEL PLATE RECEPTACLE & COVER PLATE 1-B 3/4” X 8 1/2” X 11 1/2” STEEL BASE PLATE, WELDED TO FLITCH W/ 3/16 FILLET 1X10 STAINED PENNY GAP WAINSCOT WELD EACH SIDE, FASTEN TO CONC. BELOW W/ (2) 5/8” DIA. SIMPSON TITEN HD, MIN 4 1/8” EMBED DEPTH 1-A STEEL BASE PLATE WELDED TO FLITCH PLATE IN COLUMN, FASTEN TO CONC. BELOW W/ SIMPSON TITEN HD BOLT 5/4 X 8 STAINED WOOD WALL BASE 1-A Plan Detail RECLAIMED BARN WOOD PLANK FLOORING WOOD SLEEPERS STAINED 5/4 X8 WOOD BASE TRIM SHEET METAL FLASHING TREATED WOOD FRAMING UNDERSLAB VAPOR BARRIER CEMENT PARGING W/ METAL LATH WATERPROOFING PROTECTION BOARD SELF-ADHERED BITUMINOUS SHEET MEMBRANE FOUNDATION WATERPROOFING 3d Axonmetric Wall Section The Boundary Revival tabby (an oyster shell concrete mix), Bowling Alley & Convertible Event Space a material unique to the region, was pour in twenty-four inch lifts to mimic the historic construction techniques used to build Spanish forts centuries before. The BoundaryBOWLING ALLEY: Bowling Alley SECTIONDetails DETAILS 5 V CRIMP METAL ROOFING, HIGH-TEMP ROOFING BOWLING ALLEY: UNDERLAYMENT, 5/8” PLYWOOD SHEATHING SECTION PERSPECTIVE VENTED NAILBASE INSULATION BOWLING ALLEY: PLAN DETAIL 1X4 WOOD PLANK ACOUSTIC CEILING W/ SCRIM CLOTH & ACOUSTIC INSULATION SET IN BETWEEN 4X10 STAINED WOOD PURLINS ON 2X6 SUPPORT BLOCKING 2-C STAINED WOOD VENTED EAVE TRIM W/ PLASTIC WEEP SCREEN STAINED WOOD RIB & BOARD SIDING TRUSS BOTTOM CHORD ATTACHED W/(3) 1/4” DIA. X 6” SDS SCREWS CONTINUOUS LED TAPE LIGHT W/ COUNTERBORE & PLUG METAL L-VALANCE STAINED WOOD TRIM, VALANCE, & TAPE LIGHTING 4” THICK EXTERIOR TABBY 2-C CONCRETE POURED IN 24” LIFTS 2X6 FURRED NON-BEARING WALL FRAMING 2-D FULLY ADJUSTABLE MASONRY TIES 4” THICK EXTERIOR CIP CONCRETE TABBY DRAINAGE MAT OVER FLUID APPLIED VENEER POURED IN 24” LIFTS AIR BARRIER 4” THICK TABBY CONCRETE 5/8” EXTERIOR GRADE PLYWOOD BUILT-UP WOOD COLUMN AT AIR BARRIER SHEATHING TRUSS LINE 5/8” PLYWOOD SHEATHING SPRAY-IN FOAM INSULATION DRAINAGE MAT OVER FLUID APPLIED AIR BARRIER 5/8” EXTERIOR GRADE PLYWOOD LVL HEADER SET TO BACK OF SHEATHING CAVITY TO PROVIDE SPACE FOR CAVITY INSULATION SPRAY-IN FOAM INSULATION FULLY ADJUSTABLE DUAL LINE OF SEALANT & MASONRY TIES EXTERIOR METAL DRIP FLASHING AT CONCEALED ROLLER SHADE IN CUSTOM POCKET WINDOW HEAD ALUM CLAD 2-D WOOD WINDOWS ALUMINUM CLAD WOOD AIR SUPPLY REGISTER IN WOOD TRIM W/ DUAL LINE OF DOOR & WINDOW SEALANT 2-D WOOD SLEEPERS 3/4” PLYWOOD SHEATHING 5/4X6 IPE DECKING, FASTENED 2X8 WOOD JOIST FRAMING W/ COUNTERSUNK & PLUGGED SCREWS SHEET METAL FLASHING OVER BOARD INSULATION STAINED WOOD TRIM INTERIOR AT WINDOW JAMB W/ MCA PRESERVATIVE TREATED INTEGRAL AIR SUPPLY 2X10 WOOD JOIST FRAMING REGISTER 2-B WOOD BLOCKING AROUND MECHANICAL SUPPLY CEMENT PARGE COATING DUCTWORK OVER METAL LATH AIR SUPPLY BRANCH DUCTWORK FROM TRUNK BELOW FLOOR SHEET METAL DUCTWORK IN SUPPLY PLENUM BELOW 2-B 5/8” PLYWOOD SHEATHING FLOOR AIR BARRIER 4” CIP CONCRETE TABBY VENEER 2-A 2-A SELF-ADHERED BITUMINOUS Plan Detail 12” NOM. REINFORCED SHEET MEMBRANE CONCRETE MASONRY UNIT WATERPROOFING FOUNDATION WALL DRAINAGE MAT CAST-IN-PLACE CONCRETE FOUNDATION BOARD SLAB-ON-GRADE INSULATION GRAVEL BASE COURSE SELF-ADHERED HDPE SHEET MEMBRANE WATERPROOFING COMPACTED SUBGRADE CONTINUOUS CONCRETE SPREAD FOOTING 3d Axonmetric Wall Section The Boundary Dining Screened Porch Dining Room The double-height window frames shape distant Bar & Dining Room views of the marsh - the focus of the restaurant’s interior space. Outdoor Dining Terrace The Boundary Inspired by Southern tobacco barns, the breathable basket-woven walls of cypress, stitched through a field of southern yellow Bike Barn pine poles, create a unique blend of craft and detail. Corner Detail FIGURE 3 BIKE BARN The SECTIONBoundary DETAIL BikeFIGURE 3 BIKE Barn BARN Details FIGURE 3 BIKE BARN 3-A SECTION DETAIL SECTION DETAIL 2X BLOCKING TO MAINTAIN CLOSURE AT3-A ALT. SCREENING GALV.2X BLOCKING MTL ROOFING TO MAINTAIN (CORRUGATED) CLOSURE AT ALT. SCREENING GALV. MTL DRIP FLASHING INTO GUTTER; RE: MANUFACTURER’S STANDARD DETAILS GALV. MTL ROOFING (CORRUGATED) GALV.GALV. MTL MTL HALF DRIP ROUND FLASHING GUTTER; INTO SECUREGUTTER; BRACKET RE: MANUFACTURER’S TO PURLIN AND ROOFSTANDARD JOIST DETAILS GALV. MTL ROUND DOWNSPOUT; SECUREGALV. MTL WITH HALF CUSTOM ROUND SHAPED GUTTER; STRAPSSECURE TO BRACKET COLUMN TO PURLIN AND ROOF JOIST 2X STD WD PURLINS USED AS BACKING FORGALV.
Load more

Recommended publications
  • Seawall Evaluation and Study
    SEAWALL EVALUATION AND STUDY PHASE I CONDITION ASSESSMENT PHASE II HISTORIC RESEARCH PHASE III DETAILED INVESTIGATION PHASE IV COMPREHENSIVE ENGINEERING ANALYSIS AND REPAIR RECOMMENDATIONS TABLE OF CONTENTS Executive Summary 1 Authority, Purpose, Scope and Limitations 1 Terminology 3 Seawall Descriptions 4 High Battery Seawall 4 Low Battery Seawall 5 Marina Seawall 6 Seawalls Surrounding Colonial Lake 6 Phase I General Condition Assessment 7 High Battery Seawall 9 Low Battery Seawall 11 Marina Seawall 14 Seawalls Surrounding Colonial Lake 15 Phase II Historic Research 17 Construction of the Seawalls 17 High Battery Seawall 17 Low Battery Seawall 19 Marina Seawall 21 Seawalls Surrounding Colonial Lake 22 General Conclusions 23 Stone Masonry Portion of the High Battery Seawall 23 The Low Battery Seawall and the Concrete Extension of the High Battery Seawall 23 The Marina Seawall and the Seawalls Surrounding Colonial Lake 24 Conclusion 24 Phase III Detailed Investigation Geotechnical Investigation 25 Observation Pits 26 Additional Resources 26 Specific Locations Selected 27 General Results Stone Masonry Portion of the High Battery Seawall 27 Low Battery Seawall 29 Concrete Extension of the High Battery Seawall 34 Marina Seawall 36 General Conclusions Stone Masonry Portion of the High Battery Seawall 38 Low Battery Seawall 38 Concrete Extension of the High Battery Seawall 39 Marina Seawall 39 Phase IV Comprehensive Engineering Analysis and Repair Recommendations Terminology 40 Service Life 40 Extension of Service Life 41 Categories for Maintenance
    [Show full text]
  • Cement and Concrete, Creativity and Community, and Charles E
    Cement and Concrete, Creativity and Community, and Charles E. Peterson Author(s): David Gregory Cornelius Source: APT Bulletin, Vol. 37, No. 1 (2006), pp. 17-25 Published by: Association for Preservation Technology International (APT)Association for Preservation Technology International (APT) Stable URL: http://www.jstor.org/stable/40004677 Accessed: 08/09/2010 16:55 Your use of the JSTOR archive indicates your acceptance of JSTOR's Terms and Conditions of Use, available at http://www.jstor.org/page/info/about/policies/terms.jsp. JSTOR's Terms and Conditions of Use provides, in part, that unless you have obtained prior permission, you may not download an entire issue of a journal or multiple copies of articles, and you may use content in the JSTOR archive only for your personal, non-commercial use. Please contact the publisher regarding any further use of this work. Publisher contact information may be obtained at http://www.jstor.org/action/showPublisher?publisherCode=aptech. Each copy of any part of a JSTOR transmission must contain the same copyright notice that appears on the screen or printed page of such transmission. JSTOR is a not-for-profit service that helps scholars, researchers, and students discover, use, and build upon a wide range of content in a trusted digital archive. We use information technology and tools to increase productivity and facilitate new forms of scholarship. For more information about JSTOR, please contact [email protected]. Association for Preservation Technology International (APT) is collaborating with JSTOR to digitize, preserve and extend access to APT Bulletin. http://www.jstor.org Cement and Concrete, Creativity and Community,and Charles E.
    [Show full text]
  • Cumberland Island National Seashore
    CUMBERLAND ISLAND NATIONAL SEASHORE Stabilization of Chimneys at Stafford Slave Settlement PROJECT SPECIFICATIONS 100% SUBMITTAL NPS INTERIOR REGIONS 1, 2, AND 4 ATLANTA FEDERAL CENTER 1924 BUILDING 100 ALABAMA STREET, SW ATLANTA, GEORGIA 30303 Joseph K. Oppermann – Architect, P.A. 539 North Trade Street Winston-Salem, NC 27101 August 21, 2020 REVISED: January 19, 2021 TABLE OF CONTENTS DIVISION 01 - GENERAL REQUIREMENTS 01 11 00 Summary of Work 01 26 01 Contract Modification Procedures 01 27 00 Definition of Contract Line Items 01 31 00 Project Management and Coordination 01 32 16 Construction Schedule 01 32 33 Photo Documentation for Historic Preservation Projects 01 33 23 Submittal Procedures 01 35 13.22 Archeological Protection 01 35 23 Safety Requirements 01 35 91 Historic Preservation Treatment Procedures 01 40 00 Quality Requirements 01 42 00 Reference Standards 01 50 00 Temporary Facilities and Controls 01 67 00 Product Requirements 01 73 40 Execution 01 74 19 Construction Waste Management and Disposal 01 77 00 Closeout Procedures 01 78 23 Operation and Maintenance Data DIVISION 02 – EXISTING CONDITIONS 02 42 96 Historic Removal and Dismantling DIVISION 03 - CONCRETE 03 30 00 Cast-in-place Concrete DIVISION 04 - MASONRY 04 03 22 Historic Brick Unit Masonry Repair 04 03 23 Historic Brick Unit Masonry Repointing DIVISION 05 - METALS 05 12 00 Structural Steel Framing DIVISION 06 – DIVISION 08 Not Used DIVISION 09 – FINISHES 09 91 13 Exterior Painting DIVISION 10 – DIVISION 49 Not Used APPENDICES Appendix 1 Masonry Materials Analysis and Testing Report, February 2020 CUIS – 189275 TOC – 1 TABLE OF CONTENTS SECTION 01 11 00 - SUMMARY OF WORK PART 1 - GENERAL 1.1 SUMMARY A.
    [Show full text]
  • Historic PRESERVATION Commission DESIGN STANDARDS
    CITY OF CAPE MAY Historic PRESERVATION Commission DESIGN STANDARDS CITY OF CAPE MAY Historic PRESERVATION Commission DESIGN STANDARDS Copyright © by the Cape May Historic Preservation Commission All rights reserved. Published Fall 2002 Printing by Standard Publishing, Inc. Table of Contents Introduction..................................................................................4 Historic Preservation Commission Legislative Authority of the HPC....................................5 Design Standards Definition of Key Terms........................................................7 Declaration of Purpose......................................................50 History of Cape May - Timeline.......................................8 Procedure.....................................................................................50 Overview .......................................................................................51 Architectural Styles in Cape May Secretary of the Interior’s Federal Architecture 1780-1820 ....................................14 Standards for Rehabilitation .........................................53 Romantic Houses - Early Victorian Standards Architecture 1820-1880.......................................................16 Roofs...............................................................................54 Gothic Revival................................................................18 Exterior Cladding...........................................................56 Romanesque Revival ......................................................21
    [Show full text]
  • Charleston County Park and Recreation Pool Projects
    CHARLESTON COUNTY PARK AND RECREATION POOL PROJECTS: Wannamaker County Park – Whirlin’ Waters RAFT RIDE & PLUNGE POOL North Charleston Wannamaker County Park, Whirlin’ Waters 888 University Blvd. North Charleston, SC 29406 GENERAL CONTRACTOR BID PACKAGE PROJECT MANUAL May 2018 Water Technology, Inc. Project No. 17034 TABLE OF CONTENTS Table of Contents Project Directory DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS CCPRC CCPRC Invitation for Bid & Contract Documents 00 31 00 Information Available to Bidders 00 31 21 Project Schedule 00 31 32 Geotechnical Data 00 31 33 Existing Conditions and Survey 00 31 34 List of Drawings 00 41 00 Bid Proposal Form 00 41 13 Supplements to Bid Forms 00 65 00 Substitution Request Form CCPRC Contract Document DIVISION 01 GENERAL REQUIREMENTS 01 11 00 Summary of Work 01 20 00 Project Meetings 01 20 60 Allowances & Unit Prices 01 20 70 Application for Payment 01 30 50 Modification Procedures 01 34 00 Shop Drawings, Product Data and Samples 01 40 00 Quality Control 01 40 10 Coordination 01 40 50 Cutting and Patching 01 50 10 Construction Facilities and Temporary Controls 01 50 40 Field Engineering 01 56 39 Tree Protection 01 60 00 Materials and Equipment 01 63 10 Substitutions 01 70 00 Contract Closeout 01 74 00 Warranties DIVISION 02 EXISTING CONDITIONS 02 41 19 Selective Demolition DIVISION 13 SPECIAL CONSTRUCTION 13 11 13 Pool General 13 11 14 Pool Start-Up, Maintenance & Operations Training 13 11 18 Pool Concrete 13 11 20 Pool Pipe and Pipe Fittings 13 11 23 Pool Pipe Supports 13 11 24 Pool Valves 13 11 25 Pool Centrifugal Pumps 13 11 32 Pool Fiberglass Filters 13 11 45 Pool Rail Goods 13 11 46 Pool Equipment 13 11 60 Pool Quartz Aggregate Finish 13 11 61 Pool Ceramic Tile 13 11 65 Water Flume Rides CCPRC Pool Projects Table of Contents Job #17034 May 2018 ©2017 Water Technology, Inc.
    [Show full text]
  • University of Florida Thesis Or Dissertation Formatting Template
    ORIGINS AND DEVELOPMENT OF SHELL-BASED CONSTRUCTION IN ST. AUGUSTINE By TREY ALEXANDER ASNER A THESIS PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF HISTORICAL PRESERVATION UNIVERSITY OF FLORIDA 2020 © 2020 Trey Alexander Asner To my friend and mentor Jean Wagner Wilhite Troemel (1921-2018) ACKNOWLEDGMENTS My sincere appreciation I would like to extend to the members of my thesis committee for their encouragement, enthusiasm, and guidance: from the Department of Design Construction and Planning, committee chair Prof. Morris Hylton III and co-chair Lect. Judi Shade Monk. I would also like to thank Dr. Linda Stevenson who also helped guide me throughout the completion of my degree. Special thanks are to be given to Charles Tingley, Bob Nawrocki, Chad Germany, and Claire Barnewolt of the St. Augustine research library who helped me acquire the archival information that was instrumental for my research. In addition, I would also like to thank Dr. Thomas Graham and David Nolan whose publications were crucial in my research. Finally, I would like to thank my brothers Jesse and Chase, my friends Roger and Sarah Bansemer, and my canine “Mr. Pim” who supported and motivated me throughout all stages of this research from inception to completion. 4 TABLE OF CONTENTS page ACKNOWLEDGMENTS ...............................................................................................................4 LIST OF FIGURES .........................................................................................................................8
    [Show full text]
  • Use of Recycled Oyster Shells As Aggregate for Pervious Concrete
    USE OF RECYCLED OYSTER SHELLS AS AGGREGATE FOR PERVIOUS CONCRETE By KRISTY NOEL KELLEY A THESIS PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN BUILDING CONSTRUCTION UNIVERSITY OF FLORIDA 2009 1 © 2009 Kristy Noel Kelley 2 To the power of perseverance 3 ACKNOWLEDGMENTS I would like to thank Dr. Muszynski for always believing in the potential of both a stinky shell and a disabled wrist. I would like to thank Dr. Issa for always letting me keep coming back for another semester. And I would like to extend my appreciation to Dr. Stroh for being patient and sticking with me in this thesis even though it changed routes. Finally, I thank my village – those who have raised this graduate student; be you friends near or far, boyfriend or family, I could not have made this journey without you. Thank you for reminding me to never, never give up. 4 TABLE OF CONTENTS page ACKNOWLEDGMENTS .................................................................................................. 4 LIST OF TABLES ............................................................................................................ 7 LIST OF FIGURES .......................................................................................................... 8 LIST OF ABBREVIATIONS ............................................................................................. 9 ABSTRACT ..................................................................................................................
    [Show full text]
  • Foundation Settlement Analysis of Fort Sumter National Monument: Model Development and Predictive Assessment
    Engineering Structures 65 (2014) 1–12 Contents lists available at ScienceDirect Engineering Structures journal homepage: www.elsevier.com/locate/engstruct Foundation settlement analysis of Fort Sumter National Monument: Model development and predictive assessment a a, b a c Saurabh Prabhu , Sez Atamturktur ⇑, Denis Brosnan , Peter Messier , Rick Dorrance a Glenn Department of Civil Engineering, Clemson University, Clemson, SC 29634-0911, United States b Department of Materials Science and Engineering, Clemson University, Clemson, SC, United States c Fort Sumter National Monument, National Park Services, Charleston, SC, United States article info abstract Article history: This study investigates the mechanisms by which a masonry vaulted structure responds to settlement of Received 16 January 2013 supports considering a wide range of possible settlement scenarios through a numerical model substan- Revised 4 November 2013 tiated with experimental evidence and on-site evaluations. The simulation based investigation of settle- Accepted 27 January 2014 ment induced damage is completed on the Fort Sumter, SC, where the numerical model is developed Available online 26 February 2014 through a multi-faceted approach utilizing field investigations including material testing of specimens, three-dimensional laser scanning of fort’s geometry, and dynamic measurements of relative movement Keywords: between adjacent structural components. The poorly known model input parameters are substantiated Coastal fortification with comparisons against measured dynamic characteristics of the fort, and the remaining uncertainties Brick masonry Historic monument in the input parameters are propagated to the model output to obtain a probabilistic evaluation of the Nondestructive and semi-destructive fort’s behavior under various settlement scenarios. evaluation Ó 2014 Elsevier Ltd.
    [Show full text]
  • Concrete Construction. Case Study
    Concrete Construction. Case Study 1 Project: Tropicana Field Renovations Specific: Concrete entry cylinder at East Main Entry Project Scope: Add approx. 350,000sf of space (retail, food service, concourse, office) to the existing ‘Thunderdome’. The existing tensegrity structure is 225’ tall at its peak and is approximately 750’ in diameter. Due the nature of the round structure, drawing elevations could pose a serious challenge if drawn by conventional orthographic projection methods. With the use of AutoCadLT, the additions were drawn with extruded lines and 3dfaces to produce a 3d model of the entire structure. This way, the model could be rotated to any desired elevation to create the drawings. This method proved to be a significant time and cost saving tool for the project. And inevitably, as anticipated in the beginning, just before the submission deadline, we realized that we needed another angle of elevation because there was a loading dock that was not showing up well enough on the first- decided 5 elevations. With the 3d model completed, the 6th elevation was no problem at all and the model was simply rotated to the needed angle, a 2d file was exported, cleaned up, notes added, and we had our missing elevation in a short amount of time. 2 East Elevation Showing the Entry cylinder is made of cast in place concrete and structurally served as a later load anchor for the project. At a height of 90’ and a diameter of 71’, the space serves as the main entry for the indoor ball park. It is a single space inside and has a series of glazed slots to allow for specific views out to the entry walkway.
    [Show full text]
  • Falling to Pieces: the Preservation of Ruins in Coastal Georgia
    FALLING TO PIECES: THE PRESERVATION OF RUINS IN COASTAL GEORGIA by TRACI EUGENIA CLARK (Under the Direction of John C. Waters) ABSTRACT The purpose of this thesis is to research and evaluate ruins of former buildings managed by five different agencies in Georgia in order to determine the best approach and methods for the stabilization and preservation of ruins. INDEX WORDS: Georgia coast, ruins, Wormsloe, Savannah, Dungeness, Stafford Chimneys, Cumberland Island, Jekyll Island, Horton House, Chichota, Carpentry Shop, Retreat Plantation, Fort Frederica, St. Simons Island, historic preservation FALLING TO PIECES: THE PRESERVATION OF RUINS IN COASTAL GEORGIA by TRACI EUGENIA CLARK A.B.J., The University of Georgia, 1998 A Thesis Submitted to the Graduate Faculty of The University of Georgia in Partial Fulfillment of the Requirements for the Degree MASTER OF HISTORIC PRESERVATION ATHENS, GEORGIA 2006 © 2006 Traci Eugenia Clark All Rights Reserved FALLING TO PIECES: THE PRESERVATION OF RUINS IN COASTAL GEORGIA by TRACI EUGENIA CLARK Major Professor: John C. Waters Committee: Mark Reinberger Burke Walker David Nichols Electronic Version Approved: Maureen Grasso Dean of the Graduate School The University of Georgia December 2006 ACKNOWLEDGEMENTS I want to thank everyone who supported me through this long and twisting endeavor and to my classmates that I met along the way. Great appreciation goes to Professor Waters who stressed the importance of “making my flight on time.” Despite some mild turbulence and barely missing the last leg of my flight, I made it to my final destination a-ok. Donna Gabriel has been a shoulder to cry on, a friend to lean on, and everything else I needed to make my way through this program.
    [Show full text]
  • Tabby in the Coastal Southeast: the Culture History of an American Building Material
    Louisiana State University LSU Digital Commons LSU Historical Dissertations and Theses Graduate School 1978 Tabby in the Coastal Southeast: the Culture History of an American Building Material. Janet Bigbee Gritzner Louisiana State University and Agricultural & Mechanical College Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_disstheses Recommended Citation Gritzner, Janet Bigbee, "Tabby in the Coastal Southeast: the Culture History of an American Building Material." (1978). LSU Historical Dissertations and Theses. 3205. https://digitalcommons.lsu.edu/gradschool_disstheses/3205 This Dissertation is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Historical Dissertations and Theses by an authorized administrator of LSU Digital Commons. For more information, please contact [email protected]. INFORMATION TO USERS This material was produced from a microfilm copy of the original document. While the most advanced technological means to photograph and reproduce this document have been used, the quality is heavily dependent upon the quality of the original submitted. The following explanation of techniques is provided to help you understand markings or patterns which may appear on this reproduction. 1.The sign or "target" for pages apparently lacking from the document photographed is "Missing Page(s)". If it was possible to obtain the missing page(s) or section, they are spliced into the film along with adjacent pages. This may have necessitated cutting thru an image and duplicating adjacent pages to insure you complete continuity. 2. When an image on the film is obliterated with a large round black mark, it is an indication that the photographer suspected that the copy may have moved during exposure and thus cause a blurred image.
    [Show full text]
  • Stafford Slave Settlement Cumberland Island National Seashore, Georgia
    Stafford Slave Settlement Cumberland Island National Seashore, Georgia Masonry Materials Analysis and Testing January 2020 BUILDING CONSERVATION ASSOCIATES INC. = Stafford Slave Settlement Cumberland Island National Seashore, Georgia Masonry Materials Analysis and Testing Prepared For Joseph K. Oppermann – Architect, P.A. Prepared By Building Conservation Associates, Inc. 242 Cherry Street Philadelphia, PA 19106 BCA Team Dorothy Krotzer January 2020 BUILDING CONSERVATION ASSOCIATES INC. = CONTENTS 1.0 INTRODUCTION ........................................................................................ 1 2.0 METHODOLOGY ........................................................................................ 2 3.0 SUMMARY OF FINDINGS ........................................................................... 15 3.1 Tabby Brick ........................................................................................ 15 3.2 Red Clay Brick ........................................................................................ 19 3.3 Mortar ........................................................................................ 20 3.4 Visual Observations from Site Visit ................................................... 21 4.0 CONCLUSIONS AND RECOMMENDATIONS ................................... 24 APPENDICES Appendix A: “Report on Physical Properties of Tabby Brick” (Highbridge Materials Consulting, Inc., 11/18/19) Appendix B: “Report on Tabby Brick Compositional Analysis” (Highbridge Materials Consulting, Inc., 12/23/19) Appendix C: “Report
    [Show full text]