Technical Skill Assessment Chart by Career Clusters and Programs of Study

Home , Graphic communication

Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

NOTE: These assessments only apply to students who are completing a State Approved Career and Technology Education (CTE) Program of Study. This document will be updated on an annual basis.

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Introduction to Graphic Communications 011001 assessment plus Graphic Design assessment

Graphic Communication assessment plus Digital www.gaerf.org 011002 Students must pass the Introduction to Graphic Communications assessment File Preparation/Digital File Output assessment plus one (1) specialty assessment from the following list: (1) Graphic Design; (2) Digital File Preparation/Digital File Output; (3) Offset Graphic Graphic Communication assessment plus Offset Press: Operations/Binding and Finishing; (4) Digital Production and Printing; or 011003 Communications Press assessment (5) Screen Printing Technology (PrintED) Graphic Communication assessment plus Digital www.workforceready 011010 Production and Printing assessment system.org Graphic Communication assessment plus Screen 011011 Printing Technology assessment Based on articulation agreements and dual enrollment options in the program, 011099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. 011005 Adobe Dreamweaver Certification 011006 Adobe Illustrator Certification http://www.adobe.co There are five certifications in Adobe Creative Suite. Students can obtain TSA m/support/certificatio 011007 Adobe InDesign Certification by passing one of the following exams: Dreamweaver, Illustrator, InDesign, n/ace_certify.html 011008 Adobe Photoshop Certification Photoshop or Premiere Pro. Interactive Media Production 011009 Adobe Premiere Pro Certification Based on articulation agreements and dual enrollment options in the program, 011099 College Credit students can obtain TSAs once they have passed course requirements and are Arts, Media and Communication (AMC) and Communication Media Arts, eligible to receive college credit. 011005 Adobe Dreamweaver Certification http://www.adobe.co 011006 Adobe Illustrator Certification There are five certifications in Adobe Creative Suite. Students can obtain TSA m/support/certificatio 011007 Adobe InDesign Certification by passing one of the following exams: Dreamweaver, Illustrator, InDesign, Audiovisual n/ace_certify.html 011008 Adobe Photoshop Certification Photoshop or Premiere Pro. Communication and Broadcast Technologies 011009 Adobe Premiere Pro Certification Based on articulation agreements and dual enrollment options in the program, 011099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

1 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

The A*S*K Business Institute certification assessment in Entrepreneurship/ Institute for the Assessment of the Skills and Management measures technical skills at the occupational level and includes http://www.askinstitu 021007 Knowledge of Business: items which gauge factual and theoretical knowledge. This assessment consists te.org Entrepreneurship/Management- NEW of a written assessment that can be administered in 1, 2 or 3 sessions.

https://clep.collegebo Depending on the college, students may be eligible to earn college credit with a 021002 CLEP Principles of Management Assessment ard.org score of 50 or better on the CLEP exam.

Business Management Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021011 AP Microeconomics Exam score of 3 or better on the AP exam. geboard.com/home

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021012 AP Macroeconomics Exam score of 3 or better on the AP exam. geboard.com/home

Based on articulation agreements and dual enrollment options in the program, 021099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

The A*S*K Business Institute certification assessment in Finance measures Institute for the Assessment of the Skills and technical skills at the occupational level and includes items which gauge factual http://www.askinstitu 021008 Knowledge of Business: Finance- NEW and theoretical knowledge. This assessment consists of a written assessment that te.org can be administered in 1, 2 or 3 sessions.

Business, Management and Finance (BMF) Finance and Management Business,

https://clep.collegebo Accounting and Finance Depending on the college, students may be eligible to earn college credit with a 021003 CLEP Finance and Accounting Assessment ard.org score of 50 or better on the CLEP exam.

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021011 AP Microeconomics Exam score of 3 or better on the AP exam. geboard.com/home

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021012 AP Macroeconomics Exam score of 3 or better on the AP exam. geboard.com/home

2 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Based on articulation agreements and dual enrollment options in the program, students can obtain TSAs once they have passed course requirements and are 021099 College Credit eligible to receive college credit.

NAF-Track Certification includes passing end of course exams, portfolio naf.org/our- 021006 NAF-Track Certification review, and internship requirements. approach/naftrack Academy of Finance (NAF) Based on articulation agreements and dual enrollment options in the program, 021099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

The A*S*K Business Institute certification assessment in Fundamental Institute for the Assessment of the Skills and Marketing Concepts measures technical skills at the occupational level and http://www.askinstitu 021009 Knowledge of Business: Fundamental Marketing includes items which gauge factual and theoretical knowledge. This assessment te.org Concepts- NEW consists of a written assessment that can be administered in one, two or three sessions.

https://clep.collegebo Depending on the college, students may be eligible to earn college credit with a 021004 CLEP Marketing Assessment ard.org Marketing score of 50 or better on the CLEP exam.

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021011 AP Microeconomics Exam score of 3 or better on the AP exam. geboard.com/home

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021012 AP Macroeconomics Exam score of 3 or better on the AP exam. geboard.com/home

The A*S*K Business Institute certification assessment in Fundamental Business Institute for the Assessment of the Skills and Concepts measures technical skills at the occupational level and includes items http://www.askinstitu 021010 Knowledge of Business: Fundamental Business which gauge factual and theoretical knowledge. This assessment consists of a te.org Concepts- NEW written assessment that can be administered in 1, 2 or 3 sessions. Business Administrative www.microsoft.com/e Services Pass both the Microsoft Office Word and Excel exams to earn the MOS 021005 Microsoft Office Specialist Certification n-us/learning/mos- certification certification.aspx Based on articulation agreements and dual enrollment options in the program, 021099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

3 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

www.microsoft.com/e Pass both the Microsoft Office Word and Excel exams to earn the MOS 021005 Microsoft Office Specialist Certification n-us/learning/mos- certification Management certification.aspx Information Systems Based on articulation agreements and dual enrollment options in the program, 021099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

https://clep.collegebo Depending on the college, students may be eligible to earn college credit with a 021004 CLEP Marketing Assessment ard.org score of 50 or better on the CLEP exam.

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021011 AP Microeconomics Exam score of 3 or better on the AP exam. geboard.com/home Business Marketing and Marketing Management Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021012 AP Macroeconomics Exam score of 3 or better on the AP exam. geboard.com/home

https://clep.collegebo Depending on the college, students may be eligible to earn college credit with a 021003 CLEP Finance and Accounting Assessment ard.org score of 50 or better on the CLEP exam.

Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle 021011 AP Microeconomics Exam score of 3 or better on the AP exam. geboard.com/home Accounting and Business/Finance Depending on the college, students may be eligible to earn college credit with a http://apcentral.colle Services 021012 AP Macroeconomics Exam score of 3 or better on the AP exam. geboard.com/home

Business www.microsoft.com/e Pass both the Microsoft Office Word and Excel exams to earn the MOS Administration and 021005 Microsoft Office Specialist Certification n-us/learning/mos- certification Management certification.aspx

4 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

https://clep.collegebo Depending on the college, students may be eligible to earn college credit with a 021002 CLEP Principles of Management Assessment ard.org score of 50 or better on the CLEP exam.

031001 Autodesk AutoCAD Certification Students are required to pass Autodesk’s AutoCAD or Revit certification www.autodesk.org 031002 Autodesk Revit Certification assessments Construction Design and Management Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research (NCCER) – 031004 Core plus Level 1 Masonry assessment development- Construction Trades Core: Intro Craft Skills and Level I assessment in the trade area

programs/credentials Professions: -registry Masonry Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research (NCCER) – 031005 Core plus Level 1 Carpentry assessment development- Core: Intro Craft Skills and Level I assessment in trade area programs/credentials Construction Trades -registry Professions: Carpentry Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit.

Construction and Development (CD) and Development Construction

https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research (NCCER) – 031006 Core plus Level 1 Electrical assessment development- Core: Intro Craft Skills and Level I assessment in trade area Construction Trades programs/credentials Professions: -registry Electrical Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit. Pass the National Center for Construction Education and Research(NCCER) – https://www.nccer.or 031007 Core plus Level 1 Plumbing assessment Core: Intro Craft Skills and Level I assessment in trade area g/workforce- 5 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

development- programs/credentials -registry Construction Trades Professions: Based on articulation agreements and dual enrollment options in the program, Plumbing 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit.

https://www.nccer.or g/workforce- Core plus Level 1 Industrial Maintenance Pass the National Center for Construction Education and Research(NCCER) – 031008 development- Construction assessment Core: Intro Craft Skills and Level I assessment in trade area Maintenance programs/credentials Professions: -registry Industrial Maintenance Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research(NCCER) – 031009 Core plus Level 1 HVAC assessment development- Construction Core: Intro Craft Skills and Level I assessment in trade area Maintenance programs/credentials Professions: -registry HVAC Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research(NCCER) – 031010 Core plus Level 1 Welding assessment development- Core: Intro Craft Skills and Level I assessment in trade area Construction programs/credentials Maintenance -registry Professions: Welding Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research (NCCER) – 031004 Core plus Level 1 Masonry assessment development- Core: Intro Craft Skills and Level I assessment in the trade area programs/credentials Local Construction -registry Trades: Masonry Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit.

6 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research (NCCER) – 031005 Core plus Level 1 Carpentry assessment development- Core: Intro Craft Skills and Level I assessment in trade area programs/credentials Local Construction -registry Trades: Carpentry Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSA once they have passed course requirements and are eligible to receive college credit.

https://www.nccer.or g/workforce- Core plus Level 1 Industrial Maintenance Pass the National Center for Construction Education and Research(NCCER) – 031008 development- assessment Core: Intro Craft Skills and Level I assessment in trade area Local Construction programs/credentials Maintenance: Building/ -registry Property Maintenance Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research(NCCER) – 031009 Core plus Level 1 HVAC assessment development- Core: Intro Craft Skills and Level I assessment in trade area programs/credentials Local Construction -registry Maintenance: HVAC Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. https://www.nccer.or g/workforce- Pass the National Center for Construction Education and Research(NCCER) – 031010 Core plus Level 1 Welding assessment development- Core: Intro Craft Skills and Level I assessment in trade area Local Construction programs/credentials Maintenance: Welding -registry Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. 7 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

031011 Certified Welding Certification- SMAW The AWS Certified Welder program allows students to test to those procedures used in the structural steel, petroleum pipelines, sheet metal and chemical 031012 Certified Welding Certification- GMAW refinery welding industries and demonstrate proficiency with the following processes: (1) Shielded Metal Arc Welding (SMAW), (2) Gas Metal Arc www.aws.org Welding (GMAW), (3) Gas Metal Arc Welding - Short Circuit (GMAW-S), (4) 031013 Certified Welding Certification- GMAW-S Flux Cored Arc Welding (FCAW).

031014 Certified Welding Certification- FCAW

031015 Certified Welding Certification- GTAW The AWS Certified Welder program allows students to test to those procedures used in the structural steel, petroleum pipelines, sheet metal and chemical Local Construction 031016 Certified Welding Certification- SAW refinery welding industries and demonstrate proficiency with the following www.aws.org Maintenance: Welding processes: (5) Gas Tungsten Arc Welding (GTAW), (6) Submerged Arc

Welding (SAW), or (7) Brazing. 031017 Certified Welding Certification- BZ

http://www.dllr.state. The MD State Board of Cosmetology requires students to pass both theory and Careers in Cosmetology 041001 Cosmetology License md.us/license/cos/cos practical exams to be licensed. exam.shtml http://www.dllr.state. The MD State Board of Barbers requires students to pass both theory and Barber/ Hairstylist 041002 Barber License md.us/license/barber practical exams to be licensed. (For existing programs only) s/barbersexam.shtml

041004 Certified Fundamentals Cook (CFC) certification https://www.acfchefs. Students are required to pass NOCTI written with at least a 70% and pass org/ACF/Certify/Lev NOCTI practical with at least a 75%. Students must take both the written and els/ACF/Certify/Leve Certified Fundamentals Pastry Cook (CFPC) performance tests. 041005 ls/Students/ Culinary Arts (ACF) certification

Based on articulation agreements and dual enrollment options in the program, 041099 College Credit students can obtain TSAs once they have passed course requirements and are Consumer Services, Hospitality & Tourism (CSHT) Tourism & Hospitality Services, Consumer eligible to receive college credit.

041004 Certified Fundamentals Cook (CFC) certification https://www.acfchefs. Students are required to pass NOCTI written with at least a 70% and pass org/ACF/Certify/Lev Baking and Pastry Arts NOCTI practical with at least a 75%. Students must take both the written and Certified Fundamentals Pastry Cook (CFPC) els/ACF/Certify/Leve (ACF) 041005 performance tests. certification ls/Students/

8 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Based on articulation agreements and dual enrollment options in the program, 041099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

https://chooserestaur ants.org/Programs- Food and Beverage Students must pass the Level I and Level II end-of-course exams and complete and- 041006 National ProStart Certificate of Achievement Management (ProStart) the 400 hour work-based learning (WBL) requirements. Scholarships/prostart /ProStart-for- Students

To earn the Certified Hospitality Tourism Management Professional (CHTMP), https://www.ahlei.org Hospitality and Certified Hospitality Tourism Management students must pass the end of course assessments for Year 1 and Year 2 courses, /Programs/High- 041007 Tourism Management Professional (CHTMP) certification complete 100 hour work-based learning (WBL), and complete WBL School-Program- requirements (HTMP) MD State Board Nail Technician Theory and Practical Exam administered by https://www.dllr.state Nail Specialist and 041003 Nail Technician Certification PSI. (For existing programs only) .md.us/license/cos/cos Manicurist exam.shtml https://chooserestaur ants.org/Programs- Restaurant, Culinary, Students must pass the Level I and Level II end-of-course exams and complete and- and Catering 041006 National ProStart Certificate of Achievement the 400 hour work-based learning (WBL) requirements. Scholarships/prostart Management /ProStart-for- Students

Curriculum for Based on articulation agreements and dual enrollment options in the program, http://www.case4lear Agricultural Sciences 051099 College Credit students can obtain TSAs once they have passed course requirements and are ning.org/ Education eligible to receive college credit.

Certified Professional Horticulturalist (CPH) Students are required to pass the Certified Professional Horticulturalist (CPH) https://www.mnlga.o Horticultural Services 051001 certification assessment. rg/ Based on articulation agreements and dual enrollment options in the program, Environmental Studies/ students can obtain TSAs once they have passed course requirements and are 051099 College Credit Natural Resources eligible to receive college credit.

Resources (EANR) Resources Certified Professional Horticulturalist (CPH) Students are required to pass the Certified Professional Horticulturalist (CPH) https://www.mnlga.o 051001 certification assessment. rg/ Agricultural Sciences and Operations Based on articulation agreements and dual enrollment options in the program,

Environmental, Agricultural & Natural Natural & Agricultural Environmental, 051099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

9 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Geographic Information System (GIS) Pass the Spatial Technology and Remote Sensing (STARS) assessment to earn www.digitalquest.co 071011 certification the Geographic Information System (GIS) certification. m/certification.html https://www.esri.com /training/catalog/582 Pass the ArcGIS Desktop Entry assessment to earn the ESRI ArcGIS 071012 ESRI ArcGIS Desktop certification 3c759f83732d52fa641 Certification. 06/arcgis-desktop- entry-10.5//

Based on articulation agreements and dual enrollment options in the program, Natural Resources and 051099 College Credit students can obtain TSAs once they have passed course requirements and are Conservation eligible to receive college credit.

061001 Certified Nursing Assistant (CNA) Pass the teacher developed Certified Nursing Assistant assessment

Pass the National Nurse’s Aide Assessment Program (NNAAP) administered http://www.mbon.org Academy of Health 061002 Geriatric Nursing Assistant GNA through Credential, a subsidiary of Pearson Vue Testing. Students must first /Pages/default.aspx Professions - Certified hold the CNA certificate in order to be eligible to take the GNA exam Nursing Assistant Based on articulation agreements and dual enrollment options in the program,

061099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

Students must pass exam for the Certification of Pharmacy Technicians https://www.nhanow. Pharmacy Technician Certification - ExCPT (ExCPT) through the National Health Careers Association (NHA). To sit for the 061003 com/certifications/ph exam ExCPT exam students must be within no more than 30 days of successful armacy-technician completion of all requirements needed to obtain a high school diploma.

Academy of Health

Health & Biosciences (HB) Biosciences & Health Professions - Pharmacy Students must pass exam for Pharmacy Technician certification through the https://www.ptcb.org Technician 061004 Pharmacy Technician Certification - PTCB exam Pharmacy Technician Certification Board (PTCB). To sit for the PTCB exam, /get-certified/apply- the student must be 18 years of age and a high school graduate. for-cpht

Based on articulation agreements and dual enrollment options in the program, students can obtain TSAs once they have passed course requirements and are 061099 College Credit eligible to receive college credit.

10 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

https://www.danb.or Pass the Dental Assisting National Board of Radiation Health and Safety (RHS) g/Become- 061005 Dental Assisting certification and the Maryland General Exams (MDG). Certified to expose radiographs and Certified/Exams-and- in General Chairside procedures. Certifications/CDA.a Academy of Health spx Professions - Dental Assisting Based on articulation agreements and dual enrollment options in the program, 061099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

https://www.nhanow. Certified Clinical Medical Assistant (CCMA) com/certifications/cli 061006 Students must pass the National Healthcareer’s CCMA Certification Assessment certification nical-medical- Academy of Health assistant Professions - Clinical Medical Assistant Based on articulation agreements and dual enrollment options in the program, 061099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

Academy of Health Based on articulation agreements and dual enrollment options in the program, Professions - Physical 061099 College Credit students can obtain TSAs once they have passed course requirements and are Rehabilitation eligible to receive college credit.

Academy of Health Based on articulation agreements and dual enrollment options in the program, Professions - Allied 061099 College Credit students can obtain TSAs once they have passed course requirements and are Health Other Specialty eligible to receive college credit.

Academy of Health Based on articulation agreements and dual enrollment options in the program, Professions - Dual 061099 College Credit students can obtain TSAs once they have passed course requirements and are Enrollment eligible to receive college credit.

Students are eligible to earn college credit from PLTW affiliate colleges and universities with a score of 6 or better on any of the end-of-course exams. www.pltw.org Biomedical Science Students are also eligible to earn up to 8 college credits from Stevenson 061099 College Credit (PLTW) University for BIO 113, BIO 113L and BIO 222 by doing the following:

Completing the program, earning a GPA of 3.0 of higher in all courses, and receiving a score of 7 or better on the PLTW end-of-course assessments. 11 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

The Biotechnician Assistant Credentialing Exam (BACE) is an industry- Biotechnician Assistant Credentialing Exam recognized exam designed to assess core skills and knowledge sets identified by http://biotility.resear 061010 (BACE) industry, and represented within the academic and performance standards of ch.ufl.edu/bace/ Biotechnology programs.

http://www.mbon.org 061001 Certified Nursing Assistant (CNA) Pass the teacher developed Certified Nursing Assistant assessment /Pages/default.aspx

Students must pass exam for Pharmacy Technician certification through the https://www.ptcb.org 061004 Pharmacy Technician Certification - PTCB exam Pharmacy Technician Certification Board (PTCB). To sit for the PTCB exam, /get-certified/apply- the student must be 18 years of age and a high school graduate. for-cphtt

Health https://www.danb.or Professions/Allied Pass the Dental Assisting National Board of Radiation Health and Safety (RHS) g/Become- Health Professions and 061005 Dental Assisting certification and the Maryland General Exams (MDG). Certified to expose radiographs and Certified/Exams-and- Related Sciences in General Chairside procedures. Certifications/CDA.a spx

https://www.nhanow. Certified Clinical Medical Assistant (CCMA) Students must pass the National Health Careers CCMA Certification com/certifications/cli 061006 certification Assessment nical-medical- assistant

Based on articulation agreements and dual enrollment options in the program, 061099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

Based on articulation agreements and dual enrollment options in the program, Biotechnology 061099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

12 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

The Biotechnician Assistant Credentialing Exam (BACE) is an industry- Biotechnician Assistant Credentialing Exam recognized exam designed to assess core skills and knowledge sets identified by http://biotility.resear Biotechnology 061010 (BACE) industry, and represented within the academic and performance standards of ch.ufl.edu/bace/ Biotechnology programs.

Emergency Medical Technician (EMT) 071001 certification Emergency Medical Responder (EMT) 071002 certification 071003 Fire Fighter I certification

071004 Fire Fighter II certification

Student must pass one of the following assessments: (1) EMT, (2) EMR, (3) Fire 071005 Truck Company Fireground Ops certification Fighter I, (4) Firefighter II (must pass Firefighter I first), (5) Truck Company Fireground Operations, (6) Rescue Tech – Site Operations, (7) Rescue

Technician – Vehicle and Machinery Extrication, and/or (8) Haz-Mat Operations Fire, and Emergency 071006 Rescue Tech - Site Ops certification Medical Training/ High www.mfri.org School Cadet (MFRI) Rescue Tech - Vehicle and Machinery Extraction 071007 certification

071008 Hazardous Material Operations certification

Based on articulation agreements and dual enrollment options in the program, 071099 College credit students can obtain TSAs once they have passed course requirements and are Human Resource Services (HRS) Services Human Resource eligible to receive college credit.

https://www.ets.org/p 071009 ParaPro Student must achieve a minimum score of 455 on ParaPro exam arapro Student must achieve passing scores in Reading - 156, Writing - 162, and Math https://www.ets.org/p Teacher Academy of 071010 PraxisCORE – 150 raxis/ Maryland Based on articulation agreements and dual enrollment options in the program, 071099 College credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. Geographic Information System (GIS) Pass the Spatial Technology and Remote Sensing (STARS) assessment to earn www.digitalquest.co 071011 certification the Geographic Information System (GIS) certification. m/certification.html

13 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Homeland Security & https://www.esri.com Emergency /training/catalog/582 Preparedness – Pass the ArcGIS Desktop Entry assessment to earn the ESRI ArcGIS 071012 ESRI ArcGIS Desktop certification 3c759f83732d52fa641 Information/ Certification. 06/arcgis-desktop- Communications entry-10.5// Technology

Homeland Security & Emergency Based on articulation agreements and dual enrollment options in the program, Preparedness - 071099 College credit students can obtain TSAs once they have passed course requirements and are Homeland Security eligible to receive college credit. Sciences

Homeland Security & Emergency Based on articulation agreements and dual enrollment options in the program, Preparedness - 071099 College credit students can obtain TSAs once they have passed course requirements and are Criminal Justice/Law eligible to receive college credit. Enforcement Pathway

Based on articulation agreements and dual enrollment options in the program, Criminal Justice, Law 071099 College credit students can obtain TSAs once they have passed course requirements and are and Society eligible to receive college credit.

Candidates do not receive a pass or fail score on the CDA Exam and Verification Visit. Rather, the Council for Professional Recognition http://www.cdacounc 071013 Child Development Associate certification comprehensively evaluates how candidates score in each of the thirteen CDA il.org/about/cda- Functional Areas on the CDA Exam and the CDA Verification Visit to make a credential Early Childhood credentialing decision Education/Child Care Students must complete 90 hours of Early Childhood courses (Child Growth and 071014 90 Hour Certificate Development & Methods and Materials) and earn a grade of "B" or better.

Database Academy https://academy.oracl Java Foundations Certified Junior Associate Students must pass either the Java Foundations Certified Junior Associate exam (Oracle) - Java 081002 e.com/en/oa-web-

(IT) certification or Database Foundations Junior Associate exam Programming overview.html

Technology Technology

Information Information

14 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Database Academy https://academy.oracl Database Foundations Junior Associate Students must pass either the Java Foundations Certified Junior Associate exam (Oracle) - Database 081003 e.com/en/oa-web- certification or Database Foundations Junior Associate exam Management overview.html

Depending on the college, students may be eligible to earn college credit with a https://apstudent.coll 081020 AP Computer Science Principles score of 3 or better on the AP exam. egeboard.org/apcour se

Computer Science Depending on the college, students may be eligible to earn college credit with a https://apstudent.coll 081021 AP Computer Science A (PLTW) score of 3 or better on the AP exam. egeboard.org/apcour se Based on articulation agreements and dual enrollment options in the program, 081099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. 081004 CompTIA ITF 081005 CompTIA A+ 081006 CompTIA Network+ 081007 CompTIA Security+ https://www.netacad. com/careers/certificat 081008 CompTIA PenTest+ Students are required to pass one or more of the following: (1) CompTIA ITF, ions/

(2) CompTIA A+, (3) CompTIA Network+, (4) Cisco CCT, (5) Cisco CCENT, 081009 CompTIA Linux+ (6) Cisco CCNA RS, (7) Cisco CCNA Security, (8) CompTIA Security+, (9) 081010 LPI Linux Essentials IT Networking NDG Linux Essentials, (10) CompTIA Linux+, (11) Cisco CCNA Cyber Ops, http://partners.compt 081011 Cisco CCT Academy CISCO - (12) CompTIA PenTest+ ia.org 081012 Cisco CCENT CCENT 081013 Cisco CCNA RS 081014 Cisco CCNA Security 081015 Cisco CCNA Cyber Ops Based on articulation agreements and dual enrollment options in the program, 081099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

081004 CompTIA ITF 081005 CompTIA A+ Students are required to pass one or more of the following: (1) CompTIA ITF, IT Networking (2) CompTIA A+, (3) CompTIA Network+, (4) Cisco CCT, (5) Cisco CCENT, Academy CISCO - 081006 CompTIA Network+ (6) Cisco CCNA RS, (7) Cisco CCNA Security, (8) CompTIA Security+, (9) CCNA Routing and 081007 CompTIA Security+ NDG Linux Essentials, (10) CompTIA Linux+, (11) Cisco CCNA Cyber Ops, https://www.netacad. Switching 081008 CompTIA PenTest+ (12) CompTIA PenTest+ com/careers/certificat 081009 CompTIA Linux+ ions/ 15 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

081010 LPI Linux Essentials 081011 Cisco CCT http://partners.compt 081012 Cisco CCENT ia.org 081013 Cisco CCNA RS 081014 Cisco CCNA Security 081015 Cisco CCNA Cyber Ops

IT Networking Based on articulation agreements and dual enrollment options in the program, Academy CISCO - 081099 College Credit students can obtain TSAs once they have passed course requirements and are CCNA Routing and eligible to receive college credit. Switching

081004 CompTIA ITF 081005 CompTIA A+ https://www.netacad. 081006 CompTIA Network+ Students are required to pass one or more of the following: (1) CompTIA ITF, com/careers/certificat (2) CompTIA A+, (3) CompTIA Network+, (4) Cisco CCT, (5) Cisco CCENT, 081007 CompTIA Security+ ions/ (6) Cisco CCNA RS, (7) Cisco CCNA Security, (8) CompTIA Security+, (9) NDG Linux Essentials, (10) CompTIA Linux+, (11) Cisco CCNA Cyber Ops, 081008 CompTIA PenTest+ http://partners.compt (12) CompTIA PenTest+ 081009 CompTIA Linux+ ia.org 081010 LPI Linux Essentials IT Networking 081011 Cisco CCT Academy CISCO - 081012 Cisco CCENT CCNA Security 081013 Cisco CCNA RS

081014 Cisco CCNA Security 081015 Cisco CCNA Cyber Ops

Based on articulation agreements and dual enrollment options in the program, 081099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

081004 CompTIA ITF 081005 CompTIA A+ 081006 CompTIA Network+ 081007 CompTIA Security+ https://www.netacad. Students are required to pass one or more of the following: (1) CompTIA ITF, com/careers/certificat IT Networking 081008 CompTIA PenTest+ (2) CompTIA A+, (3) CompTIA Network+, (4) Cisco CCT, (5) Cisco CCENT, ions/ Academy CISCO - (6) Cisco CCNA RS, (7) Cisco CCNA Security, (8) CompTIA Security+, (9) 081009 CompTIA Linux+ CCNA Cyber Ops NDG Linux Essentials, (10) CompTIA Linux+, (11) Cisco CCNA Cyber Ops, (12) CompTIA PenTest+ http://partners.compt 081010 LPI Linux Essentials ia.org 081011 Cisco CCT 081012 Cisco CCENT 16 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

081013 Cisco CCNA RS 081014 Cisco CCNA Security 081015 Cisco CCNA Cyber Ops Based on articulation agreements and dual enrollment options in the program, 081099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. NAF-Track Certification includes passing end of course exams, portfolio naf.org/our- 081001 NAF-Track Certification review, and internship requirements. approach/naftrack

081004 CompTIA ITF

081005 CompTIA A+ https://www.netacad. 081006 CompTIA Network+ Students are required to pass one or more of the following: (1) CompTIA ITF, com/careers/certificat (2) CompTIA A+, (3) CompTIA Network+, (4) Cisco CCT, (5) Cisco CCENT, ions// 081007 CompTIA Security+ (6) Cisco CCNA RS, (7) Cisco CCNA Security, (8) CompTIA Security+, (9) NDG Linux Essentials, (10) CompTIA Linux+, (11) Cisco CCNA Cyber Ops, http://partners.compt (12) CompTIA PenTest+ ia.org 081008 CompTIA PenTest+ Computer and 081009 CompTIA Linux+ Information Sciences 081010 LPI Linux Essentials

https://apstudent.coll Depending on the college, students may be eligible to earn college credit with a 081020 AP Computer Science Principles egeboard.org/apcour score of 3 or better on the AP exam. se

https://apstudent.coll Depending on the college, students may be eligible to earn college credit with a 081021 AP Computer Science A egeboard.org/apcour score of 3 or better on the AP exam. se

031001 Autodesk AutoCAD Certification

Students are required to pass Autodesk’s AutoCAD or Revit certification

Pre-Engineering assessments www.autodesk.org

& 031002 Autodesk Revit Certification ing, ing, (PTLW) (MET) Depending on the college, students may be eligible to earn college credit with a https://apstudent.colle

Technology Technology

Manufactur Engineering Engineering 081020 AP Computer Science Principles score of 3 or better on the AP exam. geboard.org/apcourse

17 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Based on articulation agreements and dual enrollment options in the program, 091099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

Job Planning, Benchwork & Layout certification Students pass the Measurement, Materials & Safety exam and one of the 091002 with Measurement, Materials & Safety exam following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, Manufacturing (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- Engineering Manual Milling Skills I certification with Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h Technology (NIMS) - 091003 Measurement, Materials & Safety exam Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Machining Operations Turning Operations: Turning Between Centers Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: 091004 certification with Measurement, Materials & Operations Safety exam NIMS Turning Operations: Turning Chucking 091005 Skills certification with Measurement, Materials & Safety exam NIMS Grinding Skills I certification with 091006 Measurement, Materials & Safety exam NIMS Drill Press Skills I certification with 091007 Students pass the Measurement, Materials & Safety exam and one of the Measurement, Materials & Safety exam following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, NIMS CNC Turning: Programming Setup & (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- 091008 Operations certification with Measurement, Manufacturing Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h Materials & Safety exam Engineering Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Technology (NIMS) - NIMS CNC Milling: Pgm Setup & Operations Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: Machining Operations 091009 certification with Measurement, Materials & Operations Safety exam NIMS CNC Turning: Operations certification 091010 with Measurement, Materials & Safety exam

NIMS CNC Milling: Operations certification 091011 with Measurement, Materials & Safety exam Based on articulation agreements and dual enrollment options in the program, 091099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit. Job Planning, Benchwork & Layout certification 091002 with Measurement, Materials & Safety exam Students pass the Measurement, Materials & Safety exam and one of the Manufacturing following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, Manual Milling Skills I certification with Engineering 091003 (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- Technology (NIMS) - Measurement, Materials & Safety exam Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h CNC Programming and Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Operations Turning Operations: Turning Between Centers Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: 091004 certification with Measurement, Materials & Operations Safety exam

18 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

NIMS Turning Operations: Turning Chucking 091005 Skills certification with Measurement, Materials & Safety exam

NIMS Grinding Skills I certification with 091006 Measurement, Materials & Safety exam NIMS Drill Press Skills I certification with 091007 Measurement, Materials & Safety exam NIMS CNC Turning: Programming Setup & 091008 Operations certification with Measurement, Materials & Safety exam NIMS CNC Milling: Pgm Setup & Operations Students pass the Measurement, Materials & Safety exam and one of the 091009 certification with Measurement, Materials & following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, Safety exam (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- NIMS CNC Turning: Operations certification Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h 091010 Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Manufacturing with Measurement, Materials & Safety exam Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: Engineering Operations Technology (NIMS) - NIMS CNC Milling: Operations certification 091011 CNC Programming and with Measurement, Materials & Safety exam Operations

Based on articulation agreements and dual enrollment options in the program, 091099 College Credit students can obtain TSAs once they have passed course requirements and are

eligible to receive college credit.

Job Planning, Benchwork & Layout certification 091002 with Measurement, Materials & Safety exam

Manual Milling Skills I certification with 091003 Students pass the Measurement, Materials & Safety exam and one of the Manufacturing Measurement, Materials & Safety exam following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, Engineering (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- Technology (NIMS) - Turning Operations: Turning Between Centers Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h Multi-System 091004 certification with Measurement, Materials & Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Operations Safety exam Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: Operations NIMS Turning Operations: Turning Chucking 091005 Skills certification with Measurement, Materials & Safety exam

19 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

NIMS Grinding Skills I certification with 091006 Measurement, Materials & Safety exam

NIMS Drill Press Skills I certification with 091007 Measurement, Materials & Safety exam

NIMS CNC Turning: Programming Setup & 091008 Operations certification with Measurement, Materials & Safety exam

Students pass the Measurement, Materials & Safety exam and one of the NIMS CNC Milling: Pgm Setup & Operations following: (1) Job Planning, Benchwork & Layout, (2) Manual Milling Skills I, 091009 certification with Measurement, Materials & (3) Turning Operations: Turning Between Centers, (4) Turning Operations: https://www.nims- Safety exam Manufacturing Turning Chucking Skills, (5) Grinding Skills I, (6) Drill Press Skills I, (7) CNC skills.org/web/nims/h

Engineering Turning: Programming Setup & Operations, (8) CNC Milling: Programming ome Technology (NIMS) - NIMS CNC Turning: Operations certification Setup & Operations, (9) CNC Turning: Operations, (10) CNC Milling: 091010 Multi-System with Measurement, Materials & Safety exam Operations Operations

NIMS CNC Milling: Operations certification 091011 with Measurement, Materials & Safety exam

An ADDA Apprentice Drafting Credential is the first step in an industry credentialing system that is based on an individual’s knowledge and skills 031011 ADDA Apprentice Drafter Exam needed to understand essential manual and CAD drafting skills. The exam is basic drafting knowledge and not software specific. 031001 Autodesk AutoCAD Certification Drafting and Design Students are required to pass Autodesk’s AutoCAD or Revit certification Manufacturing, Engineering & Technology (MET) Technology & Engineering Manufacturing, assessments www.autodesk.org Technology 031002 Autodesk Revit Certification

Based on articulation agreements and dual enrollment options in the program, 031099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

Manufacturing Students must pass the Safety exam and one of the following: (1) Quality Quality Practices & Measurement with Safety https://www.msscusa. Engineering 091012 Practices & Measurement (2) Manufacturing Processes & Production, (3) exam (MSSC) org/certification/ Technology (MSSC) Maintenance Awareness 20 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Manufacturing Processes & Production with 091013 Safety exam (MSSC) Maintenance Awareness with Safety exam 091014 (MSSC)

101001 Suspension and Steering student certification

101002 Brakes student certification

Electrical/ Electronic Systems student 101003 certification

101004 Engine Performance student certification

Pass one of the following ASE Student Certification exams: (1) Suspension and 101005 Engine Repair student certification https://www.ase.com/ Steering, (2) Brakes, (3) Electrical/ Electronic Systems, (4) Engine Performance, Tests/ASE-

(5) Engine Repair, (6) Automatic Transmission/ Transaxle, (7) Manual Drive Automatic Transmission/Transaxle student Certification- 101006 Train and Axles, OR (8) Heating and Air Conditioning. Developed by ASE in Automotive Technology certification Tests.aspx Maintenance and Light partnership with AYES, NATEF, and SkillsUSA Manual Drive Train and Axles student Repair- Plus (NATEF) 101007 certification

Heating and Air Conditioning student 101008 certification

Maintenance and Light Repair student 101009 certification

Transportation Technologies (TT) Technologies Transportation Based on articulation agreements and dual enrollment options in the program, 101099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

101010 Painting and Refinishing student certification https://www.ase.com/ Pass one of the following ASE Student Certification exams: (1) Painting and Tests/ASE- Refinishing OR (2) Structural Analysis and Damage Repair. Developed by ASE Certification- Autobody/Collision Structural Analysis and Damage Repair student in partnership with AYES, NATEF, and SkillsUSA. 101011 Tests.aspx Repair Technician certification www.i- 101012 I-CAR Platinum Certificate car.com/Home/Educa tional-Programs

21 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

Based on articulation agreements and dual enrollment options in the program, 101099 College Credit students can obtain TSAs once they have passed course requirements and are eligible to receive college credit.

101013 Diesel Engines student certification

Electrical/Electronic Systems student 101003 certification https://www.ase.com/ Pass one of the following ASE Student Certification exams: (1) Diesel Engines, Tests/ASE- (2) Electrical/Electronic Systems, (3) Brakes, (4) Suspension and Steering. Certification- 101002 Brakes student certification Developed by ASE in partnership with AYES, NATEF, and SkillsUSA. Tests.aspx Medium/Heavy Truck Technician- Diesel (NATEF) 101001 Suspension and Steering student certification

The American Boat and Yacht Council (ABYC) certification in Marine Service Marine Maintenance NOCTI - ABYC certification in Marine Service Technology Fundamentals is a NOCTI developed certification exam in https://nocti.org/ and Repair 101018 Technology Fundamentals partnership with ABYC based on ABYC curriculum that covers over 240 hrs of ABYC.cfm Technologies content.

Transportation Based on articulation agreements and dual enrollment options in the program, Logistics and 101099 College Credit students can obtain TSAs once they have passed course requirements and are Management eligible to receive college credit.

101001 Suspension and Steering student certification Pass one of the following ASE Student Certification exams: (1) Suspension and Steering, (2) Brakes, (3) Electrical/ Electronic Systems, (4) Engine Performance, https://www.ase.com/ Automotive (5) Engine Repair, (6) Automatic Transmission/ Transaxle, (7) Manual Drive Tests/ASE- Maintenance and 101002 Brakes student certification Train and Axles, (8) Heating and Air Conditioning, (9) Maintenance and Light Certification- Repair Technologies Repair, (10) Painting and Refinishing, (11) Structural Analysis and Damage Tests.aspx Electrical/ Electronic Systems student Repair, or (12) Diesel Engines. Developed by ASE in partnership with AYES, 101003 certification NATEF, and SkillsUSA

22 12/14/2018 Maryland Career and Technology Education Programs of Study CCR-CCA of 2013 - Technical Skill Assessment Chart by Career Clusters and Programs of Study

Websites for TSA CTE Program of Study Technical Skill Assessment Specific Criteria Additional Codes

Career Career Cluster Information

101004 Engine Performance student certification

101005 Engine Repair student certification

Automatic Transmission/Transaxle student 101006 certification

Manual Drive Train and Axles student 101007 certification

Heating and Air Conditioning student 101008 certification https://www.ase.com/ Pass one of the following ASE Student Certification exams: (1) Suspension and Tests/ASE- Maintenance and Light Repair student Certification- 101009 Steering, (2) Brakes, (3) Electrical/ Electronic Systems, (4) Engine Performance, certification (5) Engine Repair, (6) Automatic Transmission/ Transaxle, (7) Manual Drive Tests.aspx Train and Axles, (8) Heating and Air Conditioning, (9) Maintenance and Light Repair, (10) Painting and Refinishing, (11) Structural Analysis and Damage 101010 Painting and Refinishing student certification Repair, or (12) Diesel Engines. Developed by ASE in partnership with AYES, NATEF, and SkillsUSA

Structural Analysis and Damage Repair student 101011 certification

101013 Diesel Engines student certification

www.i- 101012 I-CAR Platinum Certificate car.com/Home/Educa tional-Programs

23 12/14/2018