Instruction Manual

UV8 Instruction Manual

CONTENTS Thank you for choosing a Phase Linear product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Phase Linear UV8 Mobile Multimedia Receiver for maximum enjoyment. Preparation...... 1 Installation ...... 2 Controls and Indicators ...... 4 Remote Control ...... 6 Using the TFT Monitor ...... 8 Operating Instructions ...... 10 Setup Menu...... 11 Tuner Operation ...... 13 DVD/VCD Video Operation ...... 15 DVD/CD Audio Operation ...... 18 MP3/WMA Operation ...... 19 Troubleshooting ...... 21 Specifications ...... 23

i ii UV8

PREPARATION Congratulations on your purchase of the Phase Linear UV8 • Two Composite Video Outputs for Additional Screens Mobile Multimedia Receiver. • Two Audio / Video Auxiliary Inputs for Game Console, WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. It’s a good idea to read all of the instructions before beginning Camcorder, Navigation, etc. the installation. We recommend having your Phase Linear • Three-Band Tone control (Bass, Mid and Treble) w/ UV8 installed by a reputable installation shop. Eight Preset EQ Curves • Front, Rear and Subwoofer Line Output WARNING! Using an improper fuse may cause damage to the unit and result in a fire. Features • Subwoofer Phase Control - 0 ~ 1800 DVD • Programmable Volume Control • Aspect Ratio - Full and Normal • Rear Camera Input (Normal and Mirror Image View) WARNING! The monitor employs an automatic motorized • Fast Forward - 2X, 4X, 8X and 32X • Touch Screen Calibration Mode mechanism. To prevent damage to the core mechanism, • Slow Motion - 1/2, 1/4, 1/6 and 1/7 • 2VRMS Line Output - All Channels please do not push, pull or swivel the monitor manually. • Play, Pause, Stop, Next Chapter and Previous Chapter • Rotary Encoder Audio Control CD / MP3 / WMA • 5-Way Joystick Disconnecting the Battery • CD-Text Compatible Tools and Supplies To prevent a short circuit, be sure to turn off the ignition and • ID3 Tag Compatible You will need these tools and supplies to install your UV8: remove the negative (-) battery cable prior to installation. • Directory Search (MP3 / WMA Only) • Direct Track Access via Remote Control • Torx type, flat-head and Philips screwdrivers • Burn up to 1500 MP3 and WMA Files onto a DVD+R / • Wire cutters and strippers NOTE: If the UV8 is to be installed in a car equipped with • Tools to remove existing radio (screwdriver, socket an on-board drive or navigation computer, do not RW disconnect the battery cable. If the cable is • Audible Forward / Reverse Track Search (CD-DA Only) wrench set or other tools) disconnected, the computer memory may be lost. Under • Random, Repeat and Intro • Electrical tape these conditions, use extra caution during installation to • Play, Pause, Stop, Next Track and Previous Track • Crimping tool avoid causing a short circuit. AM-FM • Volt meter/test light • Crimp connections • USA / Europe / Latin America / Asia Frequency Spacing • 30 Station Presets (18 FM / 12 AM) • 18 gauge wire for power connections • 16 – 18 gauge speaker wire • Auto Stereo / Mono • Local / Distance • Auto Store / Preview Scan WARNING! Only connect the unit to a12-volt power supply with proper grounding. A / V Media Adapter Cable • Allows Portable Media Devices to be Connected via A / V Input WARNING! Never install this unit where operation and • 4-Conductor 3.mm Connector for iPod / Zune Video, viewing could interfere with safe driving conditions. etc. Chassis • 1.0 DIN (Import / ISO-DIN Mountable) WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the • Motorized Flip-Out / Flip-Up LCD Screen video display function while driving the vehicle. This is a • 8 Character / Segment Type Secondary LCD Display violation of federal law. • 7" TFT Active Matrix LCD w/ Anti-Glare Coating • 336, 960 Sub Pixels (1440W X 234H) • Pixel Pitch - 0.321W X 0.370H WARNING! Never disassemble or adjust the unit. • Screen Tilt / Angle Adjustment • Beep Tone Confirmation (On-OFF Option) • Heat Management System - Forced Air-Cooling To WARNING! To prevent injury from shock or fire, never Keep The Chip-Sets Operating at Nominal expose this unit to moisture or water. Temperatures General WARNING! Never use irregular discs. • 44-Key Infrared Remote Control

1 UV8

INSTALLATION Pre-installation CAUTION! Be careful not to damage the car wiring. FINAL INSTALLATION 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 5 4 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. PREPARE RADIO 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch. 2

NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The UV8 uses one 10 amp mini-ATM fuse, located in the black 3 filter box in-line with the main wire harness.

Final Installation Final ISO-DIN Installation 2. Install the half-sleeve. After completing the wiring connections, turn the unit on to 1. Remove trim ring. a. Install adapter if necessary (optional). confirm operation (ignition switch must be on). If unit does not b. Install half-sleeve into adapter or dashboard (use operate, recheck all wiring until problem is corrected. Once 2. Mount factory brackets on new radio using existing only the supplied screws). Do not force the sleeve proper operation is achieved, turn off the ignition switch and screws from old radio. into the opening or cause it to bend or bow. proceed with final mounting of the chassis. 3. Slide radio chassis into dash opening and secure. c. Locate the series of bend-tabs along the top, 1. Connect wiring adapter to existing wiring harness. 4. Reinstall dash panel. bottom and sides of the mounting sleeve. With the 2. Connect antenna lead. sleeve fully inserted into the dashboard opening, 3. Carefully slide the radio into the half-sleeve, making bend as many of the tabs outward as necessary so sure it is right-side-up, until it is fully seated and the FINAL ISO-DIN INSTALLATION that the sleeve is firmly secured to the dashboard. spring clips lock it into place. d. Install support strap to make the unit more stable. 3 NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make INSTALL HALF SLEEVE sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis 2 using the hex nut provided. Fasten the other end of the 1 perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut 4 provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

5. Replace any items you removed from the dashboard.

2 UV8

WIRING DIAGRAM

BLUE

SUB.W RED External Power Amplifier FRONT R A/V Media WHITE Adapter Cable

FRONT L YELLOW RED

REAR R WHITE WHITE

AUXIN1 REAR L RED

YELLOW

External AV System WHITE

Antenna Jack AUXIN2 RED

YELLOW Rear Video 1

VIDEO OUT 1 Antenna Harness Cord

Auto antenna control (connect to antenna YELLOW Rear Video 2 control lead & power supply of antenna VIDEO OUT 2 amplifier) BLUE

ANT.CONT

External power amplifier control BLUE/WHITE Rear View YELLOW Video Camera P.CONT Car Phone CAMERA

Mute (leave open if not connected) Car BROWN PARKING BRAKE MUTE PINK PRK SW

WHITE + FRONT L+ GREEN/WHITE FRONT L WHITE/BLACK - REVERSE + P FRONT L- R N Gearbox D 2 Switch L GREY + FRONT R+ Ground GREY/BLACK - ACC Ignition Switch FRONT R- FRONT R RED

ACC PURPLE + REAR R+ PURPLE/BLACK - BATTERY + REAR R- REAR R YELLOW BATT FUSE (15A) GREEN + Battery REAR L+ GREEN/BLACK - BLACK REAR L- REAR L GND BATTERY Ground

3 UV8

CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. With the monitor closed, press the DISP button to cycle TILT PIC WIDE CLOSE through information available on the LCD screen. 3. PIC/AS/PS Press to adjust the Brightness and Contrast. Press the VOL button (5) to move between Brightness to Contrast. Turn the rotary encoder (5) to adjust the setting for the selected option. With the monitor closed, press AS/PS to automatically store strong radio stations in the six preset channels in the current band. 4. TILT/BAND Press to activate the tilt function. Use the joystick to make 17 adjustments while the yellow icon is flashing. Press once to adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous motion. With the monitor closed, press the BAND button to change the AM or FM band. 5. VOL (LO/DX) Rotate to adjust the volume. Press and release to enter and/ or confirm audio settings. Press and hold to activate the Local (LOC) setting. 6. SRC Press to turn unit on. Press and hold to turn the unit off. When on, press once to select playing mode. 7. LCD Display 16 8. MUTE Press to silence the receiver. Press again to resume previous 15 volume level. 5 14 NOTE: The UV8 features Softmute, which will allow the volume to increase or decrease gradually when the 13 MUTE function is activated or deactivated. 6 9 7 8 10 11 12

4 UV8

CONTROLS AND INDICATORS 9. IR Remote Control Receiver 10. ( ) 4 3 2 1 DVD Mode: Press once to play back the previous chapter/ track. TUNER Mode: Press once to auto-search for the previous available radio station. MENU Mode: Press once to move the cursor to the left. 11. ( ) DVD Mode: Press once for slow forward/slow reverse. TILT PIC WIDE CLOSE TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. RESET Press to reset system settings to factory default (except the password and parental lock setting). 13. Pause/Play/Enter Press to pause or resume playback or to confirm current selection. 14. ( ) 17 DVD Mode: Press once to enter the next chapter or track. TUNER Mode: Press once to auto-search the next available radio station. MENU Mode: Press once to move the cursor to the right. 15. ( ) DVD Mode: Press once for fast forward/fast reverse. TUNER Mode: Press to go up one frequency step. MENU Mode: Press once to move the cursor up. 16. ( ) Press once for disc insertion/ejection. Press and hold to reset core mechanism position. 17. TFT Display

15 5 14

6 9 7 8 10 11 12

5 UV8

REMOTE CONTROL

Table 1: Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3 8 3 23 4 MENU 1 Enters the main menu of Turns on/off PBC when the disc playing VCD 1 5 TITLE 2 Enters the title menu of the Plays first ten seconds of 2 9 disc each chapter/title 10 TILT 24 MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output 11 DISP 25 13 POWER/ 4 Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off 30

31 SCAN 14 AUDIO 5 Changes the audio language for disc playback 12 6

REPT REPT REPT A-B 6 Setup to repeat playback Setup to repeat playback 18 A-B 7 from time frame A to time from time frame A to time 16 17 frame B frame B 15 WIDE 26 REPT 7 Repeats playback of cur- Repeats playback of cur- Repeats playback of current chapter rent chapter rent track 20 21 19 22 SRC 8 Selects playing mode Selects playing mode Selects playing mode Selects playing mode SLOW SUBTITLE 9 Language selection for subtitle SETUP 29 DISP 10 Displays playing informa- Displays playing informa- Displays playing informa- Display playing information tion tion tion 27 CLEAR 28 ANGLE 11 Plays back disc in differ- Plays back Picture CD with ent angle for a scene different angle of picture displayed 12 Fast forwards the disc con- Fast forwards the disc con- Fast forwards the disc content tent tent VOL - 13 Decreases volume Decreases volume Decreases volume Decreases volume VOL + 14 Increases volume Increases volume Increases volume Increases volume 15 Selects the previous chap- Selects the previous chap- Searches an available Selects the previous track ter for playback ter for playback radio station by decreasing for playback tuning frequency 16 Pauses playback/starts Pauses playback/starts Pauses playback/starts playback playback playback 17 Selects the next chapter Selects the next chapter Searches an available Selects the next track for for playback for playback radio station by increasing playback NOTE: Your remote control may differ slightly from the tuning frequency one pictured here. The above diagram is for illustrative BAND 18 Stops playback Stops playback Selects FM/AM band Stops playback purposes only. GOTO 19 Goes to specific time Goes to specific time frame and playback frame and playback 20 Slow playback/slow rewind Slow playback/slow rewind playback playback ZOOM 21 Zooms in/out on an image Zooms in/out on an image PIC 22 Displays set-up parame- Displays set-up parameters ters

6 UV8

Table 1: Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3 8 3 4 EJECT 23 Ejects disc Ejects disc Ejects disc Ejects disc 23 1 5 24 Decreases monitor tilt Decreases monitor tilt Decreases monitor tilt Decreases monitor tilt angle angle angle angle 2 9

25 Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle 10 TILT 24 11 DISP 25 DISP 26 Selects display mode: Selects display mode: 13 FULL or NORMAL FULL or NORMAL 30 1, 2, 3, 4, 5, 27 Directly accesses chapter 1-6 selects preset for cur- Directly accesses track 31 SCAN 14 6, 7, 8, 9, 0 rent band 12 (Numeric 6 REPT REPT Keypad) 18 A-B 7 CLEAR 28 Delete entry or move back- Delete entry or move back- Delete entry or move back- Delete entry or move back- 16 17 wards to correct error in wards to correct error in wards to correct error in wards to correct error in 15 WIDE 26 Direct Access mode Direct Access mode Direct Access mode Direct Access mode 20 21 SETUP 29 Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu 19 22

SCAN 30 Plays the first ten seconds SLOW of each track SETUP 29 OPEN/ 31 Opens/closes the TFT Opens/closes the TFT Opens/closes the TFT Opens/closes the TFT CLOSE monitor monitor monitor monitor 27 CLEAR 28

NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.

7 UV8

USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Open TFT Monitor Press the DISP button (10) on the remote control or DISP/ Parking Brake Inhibit Press the OPEN button (1) on the front panel or press the WIDE button (2) on the monitor to adjust the aspect ratio as When the pink "Parking" wire is connected to the vehicle ( ) button (31) on the remote control to activate the follows: brake switch, the front TFT monitor will display video mechanism that moves the display panel into the viewing only when the parking brake sequence is engaged. Before starting the parking brake sequence, the radio position. FULL must be on with the video media disc inserted and Close TFT Monitor The entire screen is extended playing. Press the OPEN button (1) on the front panel or press the horizontally to the aspect ratio of 16 to Parking Brake Sequence ( ) button (31) on the remote control to load the display 9. The extension ratio is the same at There are two situations that can start the Parking Brake panel back into the compartment. any point. NORMAL Sequence (this is the preferred method). The timing TFT Monitor Auto Open The conventional display image has a window is between 3 ~ 5 seconds. If “TFT Auto Open” is “on” when the unit is turned on, the 4 to 3 ratio of horizontal to vertical, • Parking brake is engaged (on) when the vehicle is monitor automatically moves to the viewing position. leaving a blank area on the right and started or the accessory/ignition is turned on. To If “TFT Auto Open” is ”off” when the unit is turned on, press left sides of the display. activate video, the following sequence of events must be completed: the OPEN button (1) or ( ) button (31) on the remote a. Release parking brake for 3 ~ 5 seconds. control to move the monitor into the viewing position. Image Setting b. Reapply parking brake. If “TFT Auto Open” is set to ”Manual”, the TFT will not close c. Video should be displayed on the TFT monitor Table 2 shows the video output mode for each playing when the key is turned off. within 1 ~ 2 seconds. source. Monitor Tilt Angle Adjustment • Parking break is disengaged (off) when the vehicle is started or the accessory/ignition is turned on. To A known characteristic of LCD panels is the quality of the Table 2: Video Output Modes activate video, the following sequence of events display in relationship to the viewing angle. The monitor must be completed: angle can be adjusted for optimum viewing using one of the Playing Source Video Output Modes a. Set parking brake for 3 ~ 5 seconds. following methods: AM/FM TUNER RGB Mode b. Release parking brake for 3 ~ 5 seconds. Step by Step Angle Adjustment c. Reapply parking brake. DVD RGB Mode • Press the ( ) or ( ) button on the remote control to d. Video should be displayed on the TFT monitor adjust the tilt angle of the screen one step at a time. AUX IN CVBS Mode within 1 ~ 2 seconds. TILT • Press the button (4) on the control panel. While the *CVBS – Composite Video Baseband Signal yellow angle icon is displayed near the top right corner Monitor Movement Mechanism Parameter Adjustment Procedure of the screen, use the /\ or V buttons (18, 19) on the If an obstruction occurs in the monitor path, the following 1. Enter Picture Quality Setting Mode: joystick to adjust the tilt angle of the screen one step at protective measurements can be executed to prevent Press the PIC button (22) on the remote control or the a time. damage to the mechanism or monitor: PIC/AS/PS button (3) on the monitor. Continuous Angle Adjustment 2. Select Item to Set: Table 3: Monitor Protective Measures • Press and hold the ( ) or ( ) button on the remote Press the AUDIO button (5) on the control panel to control to adjust the tilt angle in a continuous motion. select “BRIGHT” or “CONTRAST”. Self OPEN Button Power TILT Obstruction • Press the button (4) on the control panel. While the 3. Set Parameters: Protection Pressed Reconnected yellow angle icon is displayed near the top right corner Press the VOL +/– buttons (13, 14) on the remote or of the screen, press and hold the /\ or V buttons (18, 19) turn the rotary encoder (5) on the control panel. Monitor Monitor is Monitor fully Monitor is on the joystick to adjust the tilt angle in a continuous loading out automati- extended automati- 4. Exit Picture Quality Setting Mode: horizontally cally loaded horizontally cally loaded motion. Press the PIC button (22) on the remote control or the into unit into unit PIC/AS/PS button (3) on the monitor Monitor Unit stops at Monitor fully Monitor is loading in obstruction extended automati- horizontally point horizontally cally loaded into unit

8 UV8

Table 3: Monitor Protective Measures

Self OPEN Button Power Obstruction Protection Pressed Reconnected

Monitor Unit stops at Monitor Monitor swiv- loading out obstruction swivels back els back to vertically point to the unit the unit Monitor Unit stops at Monitor Monitor swiv- loading in obstruction swivels back els back to vertically point to the unit the unit

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power.

9 UV8

OPERATING INSTRUCTIONS Power On / Off External Devices Table 4: Audio Adjustments External peripheral devices, including a game console, Press the /SRC button (6) on the unit (or the button (4) Audio Function Adjustable Range camcorder, navigation unit, iPod, Zune, etc. can be on the remote control) to turn the unit on. The buttons on the connected to this unit via RCA output using the A/V Media front of the unit light up and the current mode status appears EQ User Adapter Cable (included). Select “AUX1” or “AUX2” mode to in the LCD (7). You can also turn on the unit by pressing the Acoustic access auxiliary devices. You cannot directly control external OPEN button (1) and opening the TFT screen. Urban devices connected to AUX IN inputs. Press and hold the button to power off the unit.The monitor Rave is drawn back into the main compartment. Volume Adjustment Latin Audible Beep Confirmation To increase or decrease the volume level, turn the rotary Dance encoder (5) on the front panel or press the VOL-/+ buttons Hip Hop An audible beep tone confirms each function selection. The (13, 14) on remote control. When the volume level reaches Beep tone can be disabled through the Setup menu. “0” or “40”, a beep sounds, indicating that the adjustment limit Rock BASS -14 to +14 Mute has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds. MID -14 to +14 MUTE MUTE Press the button (8) on the front panel or the Programmable Turn-On Volume TREBLE -14 to +14 button (3) on the remote to mute the volume from the unit. This feature allows the user to select a turn-on volume setting SUB -14 to 0 Press the MUTE button again to restore the volume. “MUTE” regardless of the volume setting prior to turning the unit off. is displayed on the LCD. Adjusting the volume or using any of FAD Grid To program a specific turn-on volume level, turn the VOL the audio setup features cancels the mute function. BAL Grid control (2) to adjust the volume to the desired turn-on volume. Playing Source Selection Push and hold the VOL button while the yellow speaker icon Press the SRC button (6) on the front panel or the SRC and level indication is displayed on the screen. The unit will NOTE: The EQ mode will automatically change to button (8) on the remote to change between available playing beep to confirm your turn-on volume setting. “USER” when individual audio functions are adjusted. sources in the following order: AM/FM, DISC, AUX1, AUX2, Audio Control Menu and CAMERA. The playing mode is displayed on the TFT The Audio menu will automatically exit after a few seconds of The Audio Control feature allows you to easily adjust your and LCD screens. inactivity. To exit quickly, touch the top left corner of the audio system to meet the acoustical characteristics of your Source Menu screen or press and hold the VOL button (5). vehicle, which vary depending on the type of vehicle and its You can also use the touch screen to change the source measurements. Proper setting of the Fader and Balance System Reset through the SOURCE MENU. To access the SOURCE boosts the effects of the cabin equalizer. To correct a system halt or other MENU, touch the top left corner of the screen. [RESET] Button Press the VOL button (5) on the front panel once to display illegal operation, use the tip of a pen the audio menu. To adjust an audio feature: to press the reset button (12) located SOURCE MENU 1. Turn the rotary encoder (5) on the front panel, press the on the front bottom-right corner of the unit. After a system RADIO (>>|)/(|<<) buttons (17, 15) on the remote control, or use reset, the unit restores all factory default settings. the joystick to highlight the audio feature to be adjusted. 2. Press the joystick button (13) to select the highlighted NOTE: If the unit is reset while a DVD is playing, the DVD DISC RADIO CAMERA option. resumes play once the reset is complete. 3. Rotate the VOL button (5), press the |<<, >>|, >>, or << buttons (12, 15, 17, 20) on the remote control, or use Line Mute the joystick to adjust the selected feature to the desired AUX 1 AUX 2 setting. If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone or when verbal navigation is performed. SKIN Skin Selection Touch the SKIN button, located in the bottom right corner of Touch the DISC, RADIO, CAMERA, AUX 1 or AUX 2 button the SOURCE MENU (see “Source Menu” on page 10), to to select the corresponding source. choose an alternate background image for the touch screen.

10 UV8

SETUP MENU SETUP To access system settings, press the button (29) on 3. Select a new value by using the touchscreen or pressing Setting Options Function >> << the remote control or touch the button on the screen to the or buttons (12, 20) on the remote control or /\ V enter the “SETUP” menu. The “GENERAL” sub-menu the or buttons (18, 19) on the joystick. Korea • AM Frequency Spacing - 9kHz 4. Use the touchscreen or press the >/|| button (16) on the • AM Frequency Band - appears highlighted in blue. 531kHz~1602kHz remote control or press the joystick button (13) to • FM Frequency Spacing - 200kHz confirm setup. • FM Frequency Band - 88.1MHz~107.9MHz General Sub-menu Features SETUP MENU Beep On When turned on, an audible beep tone confirms each func- Setting Options Function tion selection. General Language Audio BACK Clock Mode 12Hr Clock displays 12 hour time Off No beep sounds. using AM and PM. Rating Clock Mode 12Hr 24Hr Clock displays 24 hour time up Language Sub-menu Features Hardware Clock 04 : 31 AM to 23:59. If a DVD supports more than 1 Subtitle or Audio language, all Clock (HH:MM) Clock appears in the top right the languages are available for selection during playback. If Tuner Region USA P.VOL corner of the screen and on the the selected language is not supported by the DVD, then the LCD screen during certain Beep On default language is used. TS Cal operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past Setting Options Function 12. OSD English On Screen Display appears in Accessing Menu Items Tuner USA • AM Frequency Spacing - 10kHz English. Region • AM Frequency Band - Touch the sub-menu name, press the <<, >>, |<<, or >>| 530kHz~1720kHz DVD Audio English DVD Audio is heard in English direction buttons (20, 12, 15, 17) on the remote control, or • FM Frequency Spacing - 200kHz when the option is available. • FM Frequency Band - use the joystick to select a sub-menu (Language, Audio, 87.5MHz~107.9MHz DVD Subti- English DVD subtitles automatically RDS, etc.). S.Amer1 • AM Frequency Spacing - 10kHz tle appear in English when avail- • AM Frequency Band - able. 530kHz~1720kHz Auto DVD subtitles appear accord- DIRECTION BUTTONS • FM Frequency Spacing - 100kHz • FM Frequency Band - ing to the default subtitle lan- 87.5MHz~108.0MHz guage specified on the disc. Arabia • AM Frequency Spacing - 9kHz Off DVD subtitles do not appear • AM Frequency Band - automatically. 531kHz~1620kHz • FM Frequency Spacing - 100kHz Disc Menu English DVD menu (if applicable) is • FM Frequency Band - displayed in English. 87.5MHz~108.0MHz China • AM Frequency Spacing - 9kHz • AM Frequency Band - Audio Sub-menu Features 522kHz~1620kHz • FM Frequency Spacing - 100kHz Setting Options Function • FM Frequency Band - The features available for adjustment under the highlighted 87.5MHz~108.0MHz DRC Off Employ the Dynamic Range sub-menu option will appear in the center of the screen. S. Amer2 • AM Frequency Spacing - 5kHz Control for better playback for • AM Frequency Band - On low volumes. Adjusting a Feature 520kHz~1600kHz • FM Frequency Spacing - 100kHz Subwoofer Off Turn the subwoofer on/off. 1. Use the touchscreen or press the /\ or V buttons (18, 19) • FM Frequency Band - on the joystick to select the feature to be adjusted. 87.5MHz~108.0MHz On 2. Enter the option field for the feature you want to adjust Europe • AM Frequency Spacing - 9kHz by using the touchscreen or pressing the >/|| button (16) • AM Frequency Band - 522kHz~1620kHz on the remote or the ENTER (joystick) button (13) on • FM Frequency Spacing - 50kHz the unit. A submenu appears in a second row with the • FM Frequency Band - 87.5MHz~108.0MHz selected option highlighted in blue.

11 UV8

P.VOL Sub-menu Features Setting Options Function NOTE: Record the password and keep it in a safe place Sub.W 0 Subwoofer output IN phase for future reference. The rating for each disc is marked Setting Options Function Phase on the disc, disc packing, or documentation. If the rating 180 Subwoofer output OUT OF is not available on the disc, the parental lock feature is Source Radio Choose a source for which you phase unavailable. Some discs restrict only portions of the disc would like to increase the rela- and the appropriate content will play. For details, please Disc tive volume (LEVEL). NOTE: Depending on your refer to the disc description. installation, reversing the sub- AUX IN1 woofer phase may increase AUX IN2 Bass output. Hardware Sub-menu Features If the rear-view video camera is connected, the unit is on, and Level 0-6 Increase relative volume for Sub Filter 80Hz Selecting a crossover fre- specified source up to 6 deci- quency sets a cut-off frequency the TFT monitor is retracted inside the unit, the TFT monitor 100Hz bels. of the subwoofer's LPF (low- automatically moves into the viewing position and Camera 120Hz pass filter). mode is selected upon shifting into REVERSE gear. When TS Cal (Screen Calibration) shifting into DRIVE gear, the TFT monitor is retracted back To access the “Screen Calibration” function from the SETUP Rating Sub-menu Features inside unit. The DVD system has a built-in parental lock feature to menu, select the “TS CAL” option. prevent unauthorized persons from viewing restricted disc Setting Options Function After entering calibration mode, a crosshair appears in a content. By default, the rating system is unlocked. Once corner quadrant of the screen. To begin calibration, press and Camera In Normal setup, the parental lock is released only by entering the hold the crosshair for one second until it moves to the next correct password. Once the password is entered, rating is Mirror Reverse the camera image as quadrant. Continue for each quadrant until the calibration is available for setup. if looking through a rear-view completed. mirror. Setting Options Function TFT Auto On The TFT panel automatically Exiting the System Setup Menu Open opens when the unit is turned To exit setup mode and resume normal playback, press the on. Password _ _ _ _ Enter a 4-digit password to SETUP BACK activate the “Rating” feature. button (29) on the remote control or touch the Off You must press the OPEN but- button on the screen. Rating 1. Kid Safe Select the appropriate rating ton (1) to open the TFT panel. level for the intended audience. 2. G Manual When the ignition is turned OFF, the TFT panel DOES 3. PG You may override higher rat- NOT retract if it was previously ings by using your password. 4. PG-13 out 5. PG-R Video Input NTSC The color signals are output in (Input cir- the standard NTSC format. 6. R cuitry auto- detects the PAL The color signals are output in 7. NC-17 video sig- the standard PAL format. 8. Adult nal from the Auto The color signal output is Aux In switched automatically based Load Fac- Reset Select “Reset” to restore the source). on the current video input sig- tory factory default settings for the nal - NTSC or PAL. Rating system only.

If the monitor is in display mode, the monitor automatically To reset the password, access the “RATING” menu and enter switches to CAMERA mode upon reverse driving. When the the current password. Once the correct password is entered, reverse driving stops, the monitor return to its original input you can access the “Password” field and enter a new one. mode.

12 UV8

TUNER OPERATION Tuner TFT Display Switching to Radio Tuner Source Direct Tuning • Touch the top left corner of the screen (the RADIO To enter a radio station directly, touch the button or 8 17 1 4 5 10 2 9 18 3 circle) to view the SOURCE MENU. Touch “Radio”. press the GOTO button (19) on the remote control to display • Press the SRC button (6) on the front panel or remote the direct entry menu. control (8) to switch to the AM/FM or RADIO source. FM-1 P1 87.5 MHz Selecting FM/AM Band RADIO ST LOC 01:02 PM FM:___._MHz Touch the BAND button (15) on the screen, or press the BAND P1 87.5 MHz button on the unit (4) or remote control (18) to change 1 2 3 E Q between the following bands: FM1, FM2, FM3, AM1, and P2 90.1 MHz Exit AM2. 4 5 6 P3 98.1 MHz

P4 106.1 MHz AS NOTE: The BAND button on the unit only works when the 7 8 9 P5 107.9 MHz TFT is closed. ENT P6 102.9 MHz 0 Clear BAND PS MEM PS: Seek Tuning To seek the next higher station: Enter the desired radio station using the on-screen number

6 7 15 21 20 18 • Touch the >>| button on screen. pad. Press the enter button (arrow) to tune to the selected • Press the >>| button (17) on remote control. station. To exit the screen without changing the station, touch • Press the > button on the joystick (17). Exit. To clear your entry and start over, touch Clear. 1. Current radio band indicator To seek the next lower station: Using Preset Stations 2. Radio frequency indicator • Touch the |<<| button on screen. Six numbered preset buttons store and recall stations for 3. Clock • Press the |<< button (15) on the remote control. each band. All six stored stations (P1-P6) for the current 4. Stereo broadcasting indicator • Press the < button on the joystick (16). 5. Strong Local signal broadcasting indicator band appear on the screen. 6. Preset radio stations: Touch to recall preset stations Manual Tuning Storing a Station 7. Information about the current function To increase or decrease the tuning frequency one step: 1. Select a band (if needed), then select a station. MEM 8. Touch for quick access to Equalizer level settings • Touch the >> or << buttons on screen. 2. Touch the on-screen button (18) to open the 9. Touch to access the direct entry screen • Press the >> or << buttons (12, 20) on the remote preset screen. 10. Current preset station indicator control. 11. |<<: Touch to seek backward • Press the /\ or V buttons (18, 19) on the joystick. 12. >>|: Touch to seek forward Preset: _ 13. <<: Touch to tune backward one step 14. >>: Touch to tune forward one step P1 P2 P3 15. BAND: Touch to change between AM/FM bands 16. AS: Touch to automatically store stations P4 P5 P6 17. Touch to view the SOURCE MENU and select a new Exit playback source 18. MEM: View screen used to enter current channel into preset memory 3. Touch the preset number in which you would like to store the current station (or press EXIT to cancel and 19. : Touch to view the SETUP menu close the menu). The preset number and station 20. PS (Preview Scan): Touch to scan all stations available, appears highlighted. stopping for 5 seconds at each and continuing until a station is selected

13 UV8

Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station.

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1 MHz

P5 107.9 MHz

P6 102.9 MHz

Auto Store (AS) To select six strong stations and store them in the current band: 1. Select a band (if needed). 2. Press the AS/PS button (3) on the control panel or touch AS (16) on the screen for 2 seconds to activate the Auto Store function. The new stations replace stations already stored in that band. Preview Scan (PS) To scan the AM or FM band for a preview of available stations in your particular area, touch the PS button (20). Touch again to stop preview scan. Local Radio Station Seeking (LOC) When the Local function is on, only radio stations with a strong local radio signal are played. To activate the Local function in AM/FM tuner mode, press and hold the VOL (rotary encoder) button (5) on the front panel. Press and hold the rotary encoder again to turn Local off. When the Local function is active, the LOC indicator at the top of the screen is illuminated.

14 UV8

DVD/VCD VIDEO OPERATION Controlling Playback • VCD (PBC Off): Repeat Single, Repeat Off NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking To access the on-screen controls, touch the bottom 1/3 of the brake is applied. If you attempt to play a DVD while the screen while a DVD is playing. Touch the 1/2 button to view a NOTE: For VCD play, the repeat function is not available vehicle is moving, the TFT screen displays “PARKING” second page of controls if PBC is on. with a blue background. Rear video screens, if applicable, will operate normally. Sectional Repeat Function (A-B) BACK EQ BACK Use the A-B function to define a specific area of a disc to Opening/Closing the TFT Video Screen repeat. Opening the TFT Screen AUDIO • Press the REPT A-B button (6) on the remote control (or To open the TFT video screen, press the OPEN button (1). the A-B button on screen) to set the start point (A) of the repeated section. The unit beeps and then opens. A-B • Press the REPT A-B button again once you reach the Closing the TFT Screen desired end point (B) of the repeated section. The OPEN Press the button (1) again to close the TFT screen. If SUB- selected portion of the DVD will now repeat the screen is in the “IN” position, it moves out before closing. TITLE continuously. • Press the REPT A-B button again to cancel the A-B Inserting a Disc 1/2 MENU TITLE 2/2 DISP section setting and stop repeat play. Upon inserting a DVD disc, DVD mode is entered and disc play begins. Accessing the DVD Menu Stopping Playback Press the MENU button (1) on the remote control to recall the NOTE: If Parental Lock (Rating) is activated and the disc Touch the stop button ( ) on the screen or press the / main DVD menu. Use the directional (arrow) buttons (<, >, /\ inserted is not authorized, the 4-digit code must be & V) on the joystick (16, 17, 18, 19) to select a title from the entered and/or the disc must be authorized (see “General BAND button (20) on the remote control to stop DVD play. Sub-menu Features” on page 11). Pausing Playback menu or touch the title on screen. Press the TITLE button (2) on the remote control or on Touch the play/pause button (>) on the screen or press the >/ screen to select a different title for playback. You cannot insert a disc if there is already a disc in the unit or || button on the remote control (16) to suspend or resume if the power is off. disc play. Press the >/|| button (16) on the remote control or the ENTER Slow Motion Playback (joystick) button (20) to confirm your selection and begin playback. You can also select a title using the touch screen. NOTE: DVD-R and DVD-RW will not play unless the Press the << button (20) on the remote control, the V button recording session is finalized and the DVD is closed. (11) on the joystick, or the << button on the screen to play the Moving Through Chapters current title in slow motion. Keep pressing and releasing the Press the >>| button (17) on the remote control, the > button Ejecting a Disc button to increase the rate from “2X” to “4X”, “8X”, and “20X”. on the joystick (17) or the >>| button on screen to advance to Press the button (21) on the unit or remote control (23) to Press >/|| (16) on the remote control or touch the on-screen the next chapter on the DVD. eject the disc. The unit automatically reverts to Tuner mode. play button (>) to resume normal play. Press the |<< button (15) on the remote control, the < button You may eject a disc with the unit powered off. The unit will Fast Forward Playback on the joystick (16), or the |<< button on screen to move to remain off after the disc is ejected. Press the >> button (12) on the remote control, the /\ button the previous chapter. Resetting the Loading Mechanism (15) on the joystick, or the >> button on the screen to fast Goto Search forward. Keep pressing and releasing the button to increase If the disc loads abnormally or an abnormal core mechanism the rate from “2X” to “4X”, “8X”, and “20X”. During DVD or VCD playback, perform the following steps to operation occurs, press and hold the button (21) on the use the GOTO feature to access a specific location on a disc: Press >/|| (16) on the remote control or touch the on-screen unit or remote control (23) to reset the loading mechanism. play button (>) to resume normal play. 1. Press the GOTO button (19) on remote control to enter Normal operation resumes. Repeat Playback “GO TO” mode. Accessing DVD Mode 2. Press the >> or << buttons (14, 22) on the remote Press the REPT button (7) on the remote control or the control or the < or > buttons (16, 17) on the joystick to To switch to DVD mode when a disc is already inserted, button on screen to alter repeat mode according to the select a category (highlighted in blue). press the SRC button (15) on the front panel or remote following: control (8) until “DISC” appears at the bottom of the screen. • DVD: Repeat Chapter, Repeat TItle, Repeat Off

15 UV8

• For DVD mode, you can choose Time or Title/ Touch Screen Direct Entry PBC - Play Back Control (VCD Only) Chapter search. To select a chapter/track directly, touch the button on For VCDs with play back functionality, play back control screen control to display the direct entry menu. (PBC) provides additional controls for VCD playback. DVD Search Press the MENU button (1) on the remote control to toggle Time – Go to specific Chapter: _ _ the PBC function “On”/”Off”. Once PBC is on, playback starts time in current title from track one of the play list. Title/Chapter – Go to 1 2 3 specific time in a Exit NOTE: When PBC is activated, fast forward, slow chapter 6 playback, and previous/next track are available. Repeat 4 5 and direct track selection are not available. • For VCD mode, press the GOTO button to choose 7 8 9 between Track Search, Disc Search and Exit. ENT When PBC is activated, selecting random, scan, or search 0 Clear playback automatically deactivates PBC. VCD Track Search Playback Information Time – Go to specific During DVD and VCD playback, press the DISP button (10) time in the current track Enter the desired chapter/track using the on-screen number on the remote control to display playback information on the Track – Go to specific pad. Press the enter button (arrow) to tune to the selected screen, including the media playing and current playback track station. To exit the screen without changing the station, touch time. VCD Disc Search Exit. To clear your entry and start over, touch Clear. DVD Playback Information Time – Go to specific Viewing an Alternate Picture Angle The following information is displayed at the top of the screen time on disc (DVD Only) during DVD playback: Track – Go to specific track Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with 3. Enter a time into the field using the numeric keypad (29) multiple angles, press the ANGLE button (11) on the remote on the remote control. control to toggle available angles of the on-screen image. • T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is >/|| currently playing. 4. Press the button (18) on the remote control or the Zooming ENTER (joystick) button (20) to go to the specified • C : 2/16 – “2 / 16" indicates that the second of 16 titles location on the disc. Press the ZOOM button (21) on the remote control to enlarge on the DVD is currently playing. 5. Press the GOTO button again to exit. and pan through the video image using the following options: • 00:41:28 – “00:41:28” indicates the playback time of the “Q1”, “Q2”, “Q3”, “Q4” and “OFF”. current title. Direct Chapter / Track Selection • 2 / 6 Eng – The language display information Remote Control Direct Entry Multi-Language Discs (DVD Only) indicates the second language out of 6 (English) is Changing Audio Language currently being used. During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (27) to access a track If you are watching a disc recorded in multiple languages, VCD Playback Information directly. press the VOL button (5) on the remote control to choose a The following information is displayed at the top of the screen language. during VCD playback: Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the • VCD2.0 – Format of current disc. subtitles to appear. • T: 6/18 – “6/18” indicates the sixth of 18 tracks on the VCD is currently playing. NOTE: During VCD playback, press the VOL button (5) • 00:02:18 – “00:02:18” indicates the playback time of the on the remote control to choose between Left Channel, current track. Right Channel, and Stereo.

16 UV8

General Disc Information Table 6: Disc Symbols Table 5: Disc Properties Symbol Meaning

Symbol 12cm Disc Properties Max Play Indicates the region code where the disc Time can be played. • Region 1: USA, Canada, East Pacific Single side single layer (MPEG 2 Ocean Islands (DVD-5) Method) • Region 2: Japan, Western Europe, Single side double layer 133 minutes (DVD-9) 242 minutes Northern Europe, Egypt, South Africa, Double side single layer 266 minutes Middle East (DVD-10) 484 minutes • Region 3: Taiwan, Hong Kong, South Double side double layer Korea, Thailand, Indonesia, South-East (DVD-18) Asia Single side single layer (MPEG 1 • Region 4: Australia, New Zealand, (VCD) Method) 74 minutes Middle and South America, South Pacific Ocean Islands/Oceania Single side single layer 74 minutes • Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North K or ea, Nor th A fri ca , North -Wes t A s ia Table 6: Disc Symbols • Region 6: Mainland China • ALL: All regions Symbol Meaning

Number of voice languages recorded. The number inside the icon indicates the number languages on the disc (maximum of 8). Number of subtitle languages available on the disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Let- ter Box and “PS” stands for Pan/Scan. In the example on the left, the 16:9 video can be converted to Letter Box video.

17 UV8

DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for 14. Touch to access the direct entry screen Fast Forward DVD and CD operation. Please see the DVD/Disc Video 15. : Touch to view the SETUP menu Touch the >> button on screen, press the >> button (12) on Operation section for information about these topics. 16. Touch for quick access to Equalizer level settings the remote control, or press the /\ button (18) on the joystick The UV8 will play music or other audio files from the following 17. Touch to view the SOURCE MENU and select a new to fast forward. Keep pressing and releasing the button to disc media: playback source increase the rate from “2X” to “4X”, “8X”, and “20X”. • CD-DA Controlling Playback Direct Track Entry • CD-R/RW •DVD Stopping Playback To select a track directly, touch the button on screen •DVD+R/RW Touch the button on screen or press the /BAND button control to display the direct entry menu. •DVD-R/RW (18) on the remote control to stop disc play. Upon inserting a disc with the TFT screen open, the disc and To resume playback, touch the /|| button on screen, press Chapter: _ _ track title (if available), along with the track number and the joystick button (13) on the front panel, or press the >/|| playing time appear on the screen. button on the remote control (16). 1 2 3 CD Player User Interface Pausing Playback Exit 4 5 6 The on-screen indicators and touch key areas for CD Touch the /|| button on screen, press the joystick button (13) playback are outlined below. on the front panel, or press the >/|| button on the remote 7 8 9 control (16) to suspend or resume disc play. ENT Moving Through Tracks 16 17 1 2 15 3 0 Clear Press the >>| button (17) on the remote control or on screen or use the > button on the joystick (14) to advance to the next DISC CD T: 1/10 00:00:23 01:02 PM track on the disc. Enter the desired track using the on-screen number pad. Press the |<< button (15) on the remote control or on screen Press the enter button (arrow) to tune to the selected station. Track 1 E or use the < button on the joystick (10) to move to the To exit the screen without changing the station, touch Exit. To Q 14 Track 2 previous track. clear your entry and start over, touch Clear. 10 Track 3 Repeat Playback Track 4 8 Track 5 Touch the button on screen or press the REPT button (7) Track 6 6 on the remote control to alter repeat mode according to the following: • DVD: Repeat Chapter, Repeat Title, Repeat Off • CD-DA: Repeat Single, Repeat Off 12 4 5 9 11 7 13 • CD-R/RW: Repeat Single, Repeat Off • DVD-R/RW: Repeat Single, Repeat Off 1. Current track and total number of tracks on disc Track Scan Select (CD-DA discs only) 2. Elapsed playing time During disc play, press the SCAN button (30) on the remote 3. Current time control to play the first 10 seconds of each track. When a 4. Track titles desired track is reached, press the SCAN button again to 5. Disc title cancel the function and play the selected track. 6. /||: Touch to play/pause disc playback Random Play Select 7. : Touch to stop disc playback While disc play is stopped, touch the button on screen to >>| 8. : Touch to move to next track play the tracks on the disc in a random, shuffled order. Touch |<< 9. : Touch to move to previous track the (RDM) button again to cancel Random Play mode. 10. >>: Touch to fast forward current track 11. <<: Touch to rewind current track NOTE: CD-R and CD-RW will not play unless the 12. Touch to activate/deactivate Repeat play mode recording session is finalized. 13. Touch to activate/deactivate Random mode

18 UV8

MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for MP3 Playing Order MP3 Player User Interface DVD and MP3 operation. Please see the DVD/Disc Video When selected for play, files and folders (Folder Search, File The on-screen indicators and touch key areas for MP3 Operation section for information about these topics. Search or Folder Select) are accessed in the order they were playback are outlined below. Media and File Requirements written by the CD writer. As a result, the order in which they are expected to be played may not match the order in which 16 17 18 1 2 15 3 This player allows you to play back MP3 and WMA files they are actually played. You may be able to set the order in recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. which MP3/WMA files are to be played by writing them onto a (Root) For CD-RW discs, please make sure it is formatted using the medium such as a CD-R with their file names beginning with MP3 4/84 00:00:23 01:02 PM full method and not the quick method to prevent illegal disc play sequence numbers such as "01" to "99". DISC operation. For example, a medium with the following folder/file hierarchy E 1 Cherry Poppin Dad Up to 1500 songs/files can be burned onto a disc for a MEGA Q 14 is subject to Folder Search, File Search or Folder Select, as 2 Chris Isaak - Baby DVD music mix. Do not exceed this number of songs/files or shown below. 3 Crazy Town - Butt 10 disc readability problems may occur. 4 Phish - Birds Of A 8 MP3 Format Compatibility 5 Phish - Bouncin' R The file naming formats listed below are compatible with this 6 Phish - Freebird (L 6 unit: DIR - DIR + • ISO 9660 – file name: 12 characters, file extension: 3 characters 5 9 12 7 13 • ISO 9660 – file name: 31 characters, file extension: 3 4 11 characters • Joliet – 64 characters 1. Current track and total number of tracks on disc If the file or folder name does not conform to ISO 9660 file 2. Elapsed playing time system standards, it may not be displayed or played back 3. Current time correctly. Use the following settings when compressing audio 4. Track titles data for your MP3 disc: 5. ID3 information • Transfer Bit Rate: 128kbps 6. /||: Touch to play/pause disc playback • Sampling Frequency: 48kHz 7. : Touch to stop disc playback When recording MP3 up to the maximum disc capacity, 8. >>|: Touch to move to next track disable additional writing. For recording on an empty disc up 9. |<<: Touch to move to previous track to maximum disc capacity, use the "Disc at once" setting. 10. : Touch to view the next page of songs 11. : Touch to view the previous page of songs 12. DIR -: Touch to view the previous folder 13. DIR +: Touch to view the next folder The UV8 player will only recognize three folder levels and 14. Touch to access the direct entry screen does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but 15. : Touch to view the SETUP menu not 2 and 7 since they do not contain any tracks directly. 16. Touch for quick access to Equalizer level settings Folder 5 is not recognized at all since it is at the fourth level. 17. Touch to view the SOURCE MENU and select a new playback source 18. Folder name

19 UV8

Controlling Playback Playing MP3/WMA Files After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory.

NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning option, if available. This slower burning speed will help eliminate buffer errors and increase disc reading reliability. Also, use folders when burning large numbers of songs / files to a disc for easy music navigation. Select the "Disc at Once" option and close your disc.

Stopping Playback Touch the button on screen or press the /BAND button (18) on the remote control to stop disc play. To resume playback, touch the /|| button on screen, press the joystick button (13) on the front panel, or press the >/|| button on the remote control (16). Pausing Playback Touch the /|| button on screen, press the joystick button (13) on the front panel, or press the >/|| button on the remote control (16) to suspend or resume disc play. Moving Through Tracks Press the >>| button (17) on the remote control or on screen or use the > button on the joystick (14) to advance to the next track on the disc. Press the |<< button (15) on the remote control or on screen or use the < button on the joystick (10) to move to the previous track. Repeat Playback Press the REPT button (7) on the remote control to alter repeat mode according to the following: Repeat Single, Folder Repeat, Repeat Off

NOTE: CD-R and CD-RW will not play unless the recording session is finalized.

Direct Track Entry Use the numeric keypad (27) on the remote control to access files directly or press the button (see “Direct Track Entry” on page 18).

20 UV8

TROUBLESHOOTING Table 7: Troubleshooting

Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Remote control does not function Battery depleted Replace battery with new one Battery installed incorrectly Remove battery and install correctly No/low audio output Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Replace speakers Heavily biased volume balance Adjust the channel balance to the center position Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections Poor sound quality or distortion Pirated disc is in use Use original copy Speaker power rating not compatible with unit Connect proper speakers Speaker is shorted Check speaker contact Unit resets itself when engine is off Incorrect connection between ACC and positive Check wiring and correct battery wire TFT MONITOR Monitor does not open automatically TFT Auto Open is turned off Turn TFT Auto Open on No image Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engaged Stop vehicle in safe place and apply parking brake Flashing image or interference appears on DVD is not compatible with current TV system Change setup to accommodate disc screen settings Improper video signal connections Check wiring and correct Prolonged image or improper height/width Improper aspect ratio setup Use correct aspect ratio setting ratio display Monitor stops at incorrect position Moving path is blocked Press OPEN key to restart monitor movement TUNER Weak station searching Auto antenna is not fully extended Connect the auto antenna control cable properly Auto antenna not properly connected Connect the auto antenna control cable properly LOCAL function is activated Turn LOCAL function off Cannot insert disc Disc already inside unit Eject current disc and insert new one Image blurred, distorted, or dark Disc is illegally copied Use original disc

21 UV8

Table 7: Troubleshooting

Problem Cause Corrective Action

Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with label side up PBC cannot be used during VCD playback PCB is not available on the disc No repeat or searching while playing VCD PCB is on Turn PCB off MP3 Interruption occurred during playback Disc is dirty or scratched Clean disc or replace File is damaged/bad recording Recreate disc with good files Incorrect playback message displayed Message is longer than LCD can display Error Messages

Table 8: Error Messages

Message Displayed Cause Corrective Action

Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Bad Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Unknown disc Disc format is not compatible with this unit Region Error DVD is not compatible with region code of unit Error Illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism

Care and Maintenance 4. Never insert anything other than a 5” (12 cm) compact vehicle to reach a normal temperature before using disc into the player as the mechanism can be damaged player. 1. Use only a clean silicone cloth and neutral detergent to by foreign objects. 7. When the vehicle warms up during cold weather or clean the front panel or monitor. A rough cloth and non- neutral detergent (such as alcohol) may result in 5. Do not attempt to use a 3” (8 cm) CD-Single disc in this under damp conditions, condensation may appear on unit, either with or without an adaptor, as damage to the the LCD panel. Should this occur, the screen will not scratching or discoloration. player and/or disc may occur. Such damage is not operate properly until the moisture has evaporated. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature inside the player gets too hot, a covered by the Warranty on this product. 8. We suggest you use a cleaning disc in this unit more 6. The CD player may not operate properly in extreme hot frequently than in the unit in your home due to the protective circuit automatically stops play of the disc. If or cold. If such conditions occur, allow the interior of the environmental conditions of the vehicle. this occurs, allow the unit to cool before operating the player again.

22 UV8

SPECIFICATIONS DVD/CD Player CEA Power Ratings Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, DivX, Xvid, AVI, MPEG1 / 2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < rate, Multi-Bit Sigma-Delta Modulator 1% THD+N Video Signal to Noise Ratio: 70dBA below reference (Reference: 1 Format: NTSC, PAL (auto-detection) Watt, 4-Ohms) Output: 1Vp-p (75-ohm) Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used Input: 1Vp-p (75-ohm) as reference input) FM Tuner Reference Supply Voltage: 14.4VDC Tuning Range: 87.5MHz - 107.9MHz *Specifications subject to change without notice. Mono Sensitivity (-30dB): 9dBf Quieting Sensitivity (-50dB): 15dBf Alternate Channel Selectivity: 70dB Signal to Noise Ratio @ 1 kHz: 58dB Image Rejection: 80dB Stereo Separation @ 1 kHz: >30dB Frequency Response: 30Hz - 15 kHz, -3d AM Tuner Tuning Range: 530 kHz - 1720 kHz Sensitivity (-20dB): 15uV Signal to Noise Ratio @ 1 kHz: 50dB Image Rejection: 60dB Frequency Response: 50Hz - 2 kHz, -3dB Monitor Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen, 6.06" (154.1mm) W X 3.42" (87mm) H Screen Type: TFT Liquid Crystal Display (LCD) active matrix Resolution: 336,960 sub pixels, 1440 (W) X 234 (H) General Auxiliary Input impedance: 10k Power Supply: 11 to 16VDC, negative ground Power Antenna (Blue): 500mA max, current limited protection Amplifier Remote (Blue/White): 500mA max, current limited protection Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATM type DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x 50mm)

23 UV8

Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits

Audiovox Electronics Corporation (“the Company”) is committed to Limitations quality and customer service, and are pleased to offer you this THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY Warranty. Please read it thoroughly and contact the Company at 1-800- IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, 323-4815 with any questions. IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Who is covered?

The Company extends this warranty to the original retail purchaser of products This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Canada. This warranty is not transferable or assignable. Proof of purchase is MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS required in the form of an original sales receipt. WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY

HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF What is covered? MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 The Company warrants that should this product or any part thereof, under normal MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE use, be proven defective in material or workmanship within 12 months from the COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL date of original purchase, such defect(s) will be repaired or replaced with a new or DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS reconditioned product (at the Company's option) without charge for parts and OR IMPLIED, WHATSOEVER. No person or representative is authorized to repair labor. assume for the Company any liability other than expressed herein in connection

with the sale of this product. What is not covered?

This Warranty does not cover the following: Some states do not allow limitations on how long an implied warranty lasts or the • Damage incurred during shipping or transporting the product to the exclusion or limitation of incidental or consequential damage so the above Company or a service center limitations or exclusions may not apply to you. This Warranty gives you specific • Elimination of car static or motor noise legal rights and you may also have other rights which vary from state to state. • Defects in cosmetic, decorative or non-operative structural parts • Correction of antenna problems Obtaining Warranty Service • Costs incurred for installation, removal or reinstallation of the product • To obtain repair or replacement within the terms of this Warranty, • Consequential damage to compact discs, USB devices, digital media call 1-800-323-4815 for the location of a warranty station serving cards, accessories or vehicle electrical systems your area. • Damage caused by improper installation, mishandling, misuse, neglect, • You must prepay the initial shipping charges to the Company. accident, blown fuse, battery leakage, theft or improper storage The Company will pay the return shipping charges for all • Products whose factory serial number/bar code label(s) or markings warranteed products returned to an address within the U.S.A., have been removed or defaced Puerto Rico or Canada. • Damage resulting from moisture, humidity, excessive temperature, • Please package the product securely to avoid shipping damage. extreme environmental conditions or external natural causes We recommend using a carrier that provides tracking service to prevent lost packages. Lost or damaged packages are not Please review the “Care and Maintenance” section of your Installation covered by this warranty. and Operation Manual for additional information regarding the proper • Provide a detailed description of the problem(s) for which you use of your product. require service.

Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.audiovox.com