UV8 Instruction Manual CONTENTS Thank you for choosing a Phase Linear product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Phase Linear UV8 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ............................................................................................................................. 2 Controls and Indicators ......................................................................................................... 4 Remote Control ..................................................................................................................... 6 Using the TFT Monitor .......................................................................................................... 8 Operating Instructions ......................................................................................................... 10 Setup Menu......................................................................................................................... 11 Tuner Operation .................................................................................................................. 13 DVD/VCD Video Operation ................................................................................................. 15 DVD/CD Audio Operation ................................................................................................... 18 MP3/WMA Operation .......................................................................................................... 19 Troubleshooting .................................................................................................................. 21 Specifications ...................................................................................................................... 23 i ii UV8 PREPARATION Congratulations on your purchase of the Phase Linear UV8 • Two Composite Video Outputs for Additional Screens Mobile Multimedia Receiver. • Two Audio / Video Auxiliary Inputs for Game Console, WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. It’s a good idea to read all of the instructions before beginning Camcorder, Navigation, etc. the installation. We recommend having your Phase Linear • Three-Band Tone control (Bass, Mid and Treble) w/ UV8 installed by a reputable installation shop. Eight Preset EQ Curves • Front, Rear and Subwoofer Line Output WARNING! Using an improper fuse may cause damage to the unit and result in a fire. Features • Subwoofer Phase Control - 0 ~ 1800 DVD • Programmable Volume Control • Aspect Ratio - Full and Normal • Rear Camera Input (Normal and Mirror Image View) WARNING! The monitor employs an automatic motorized • Fast Forward - 2X, 4X, 8X and 32X • Touch Screen Calibration Mode mechanism. To prevent damage to the core mechanism, • Slow Motion - 1/2, 1/4, 1/6 and 1/7 • 2VRMS Line Output - All Channels please do not push, pull or swivel the monitor manually. • Play, Pause, Stop, Next Chapter and Previous Chapter • Rotary Encoder Audio Control CD / MP3 / WMA • 5-Way Joystick Disconnecting the Battery • CD-Text Compatible Tools and Supplies To prevent a short circuit, be sure to turn off the ignition and • ID3 Tag Compatible You will need these tools and supplies to install your UV8: remove the negative (-) battery cable prior to installation. • Directory Search (MP3 / WMA Only) • Direct Track Access via Remote Control • Torx type, flat-head and Philips screwdrivers • Burn up to 1500 MP3 and WMA Files onto a DVD+R / • Wire cutters and strippers NOTE: If the UV8 is to be installed in a car equipped with • Tools to remove existing radio (screwdriver, socket an on-board drive or navigation computer, do not RW disconnect the battery cable. If the cable is • Audible Forward / Reverse Track Search (CD-DA Only) wrench set or other tools) disconnected, the computer memory may be lost. Under • Random, Repeat and Intro • Electrical tape these conditions, use extra caution during installation to • Play, Pause, Stop, Next Track and Previous Track • Crimping tool avoid causing a short circuit. AM-FM • Volt meter/test light • Crimp connections • USA / Europe / Latin America / Asia Frequency Spacing • 30 Station Presets (18 FM / 12 AM) • 18 gauge wire for power connections • 16 – 18 gauge speaker wire • Auto Stereo / Mono • Local / Distance • Auto Store / Preview Scan WARNING! Only connect the unit to a12-volt power supply with proper grounding. A / V Media Adapter Cable • Allows Portable Media Devices to be Connected via A / V Input WARNING! Never install this unit where operation and • 4-Conductor 3.mm Connector for iPod / Zune Video, viewing could interfere with safe driving conditions. etc. Chassis • 1.0 DIN (Import / ISO-DIN Mountable) WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the • Motorized Flip-Out / Flip-Up LCD Screen video display function while driving the vehicle. This is a • 8 Character / Segment Type Secondary LCD Display violation of federal law. • 7" TFT Active Matrix LCD w/ Anti-Glare Coating • 336, 960 Sub Pixels (1440W X 234H) • Pixel Pitch - 0.321W X 0.370H WARNING! Never disassemble or adjust the unit. • Screen Tilt / Angle Adjustment • Beep Tone Confirmation (On-OFF Option) • Heat Management System - Forced Air-Cooling To WARNING! To prevent injury from shock or fire, never Keep The Chip-Sets Operating at Nominal expose this unit to moisture or water. Temperatures General WARNING! Never use irregular discs. • 44-Key Infrared Remote Control 1 UV8 INSTALLATION Pre-installation CAUTION! Be careful not to damage the car wiring. FINAL INSTALLATION 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 5 4 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. PREPARE RADIO 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch. 2 NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The UV8 uses one 10 amp mini-ATM fuse, located in the black 3 filter box in-line with the main wire harness. Final Installation Final ISO-DIN Installation 2. Install the half-sleeve. After completing the wiring connections, turn the unit on to 1. Remove trim ring. a. Install adapter if necessary (optional). confirm operation (ignition switch must be on). If unit does not b. Install half-sleeve into adapter or dashboard (use operate, recheck all wiring until problem is corrected. Once 2. Mount factory brackets on new radio using existing only the supplied screws). Do not force the sleeve proper operation is achieved, turn off the ignition switch and screws from old radio. into the opening or cause it to bend or bow. proceed with final mounting of the chassis. 3. Slide radio chassis into dash opening and secure. c. Locate the series of bend-tabs along the top, 1. Connect wiring adapter to existing wiring harness. 4. Reinstall dash panel. bottom and sides of the mounting sleeve. With the 2. Connect antenna lead. sleeve fully inserted into the dashboard opening, 3. Carefully slide the radio into the half-sleeve, making bend as many of the tabs outward as necessary so sure it is right-side-up, until it is fully seated and the FINAL ISO-DIN INSTALLATION that the sleeve is firmly secured to the dashboard. spring clips lock it into place. d. Install support strap to make the unit more stable. 3 NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make INSTALL HALF SLEEVE sure the unit is mounted within this limitation. 4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis 2 using the hex nut provided. Fasten the other end of the 1 perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut 4 provided. Bend the strap to position it as necessary. CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration. 5. Replace any items you removed from the dashboard. 2 UV8 WIRING DIAGRAM BLUE SUB.W RED External Power Amplifier FRONT R A/V Media WHITE Adapter Cable FRONT L YELLOW RED REAR R WHITE WHITE AUXIN1 REAR L RED YELLOW External AV System WHITE Antenna Jack AUXIN2 RED YELLOW Rear Video 1 VIDEO OUT 1 Antenna Harness Cord Auto antenna control (connect to antenna YELLOW Rear Video 2 control lead & power supply of antenna VIDEO OUT 2 amplifier) BLUE ANT.CONT External power amplifier control BLUE/WHITE Rear View YELLOW Video Camera P.CONT Car Phone CAMERA Mute (leave open if not connected) Car BROWN PARKING BRAKE MUTE PINK PRK SW WHITE + FRONT L+ GREEN/WHITE FRONT L WHITE/BLACK - REVERSE + P FRONT L- R N Gearbox D 2 Switch L GREY + FRONT R+ Ground GREY/BLACK - ACC Ignition Switch FRONT R- FRONT R RED ACC PURPLE + REAR R+ PURPLE/BLACK - BATTERY + REAR R- REAR R YELLOW BATT FUSE (15A) GREEN + Battery REAR L+ GREEN/BLACK - BLACK REAR L- REAR L GND BATTERY Ground 3 UV8 CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. OPEN Press