DOCSLIB.ORG

Valdora Cycles Composite Frame Care

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Valdora Cycles Composite Frame Care Valdora Cycles Composite Frame Care Before you begin…………………Notice – Valdora framesets / components should be assembled by a professionally certified bicycle mechanic who has experience working on bikes with internal cable routing. Please thoroughly review these instructions before beginning any work on this bike or beginning assembly. When utilizing a repair stand, use a stand that can clamp to an aero seat post or a stand the attaches to the frames dropouts. The repair stand clamping mechanism should never clamp onto any portion of the frame besides the seat post or drop outs. Head Set An integrated Cane Creek style, 1-1/8”, 36/45 (such as a IS-2) headset is required. Grease the insides of the head tube where the bearings sit. Follow manufacturers instructions provided with headset. Bottom Bracket Required bottom bracket - 68 mm and BSA threaded. Grease the face and threads prior to installation. Loc-Tite or other thread binding substance should not be used! Follow the manufactures instructions for installation torque. Front Derailleur Mounting Bracket Grease the threads of the mounting bolts before installing. Make certain the bolts are tightened enough to keep the bracket from moving during front derailleur shifts. Drop Outs / Derailleur Hanger This frame is equipped with standard drop out spacing of 130 mm. Generally hubs requiring spacing of 128 mm to 132 mm can be used but no greater and no less. Do not attempt to compress, bend or cold set the drop out spacing! The rear derailleur hanger is replaceable. If at any time, the replaceable derailleur hanger is bent, stop riding immediately! Contact Valdora or your local dealer to acquire a replacement derailleur hanger. Cable Routing: Cables run bare through frame (no internal housing). The PHX2 frame comes with removable lengths of poly housing threaded through the top tube, down tube, and chain stay. You should have also received 8 black cable stopper inserts. Before you install your cables, you will need to precut your cable housing to the desired lengths and attach standard housing ferrules. Insert your cable through the pre-cut housing and ferrule, though a black stopper insert, and then through the removable housing already in the frame. Once the cable is all the way through the frame, you may pull out the removable housing. Slide another black stopper insert on the cable and then the exit piece of cable housing with ferrule. Continue with the next housing. Do not use a ferrule on the end of the housing that goes into the silver cable guide toward the front derailleur. Save removable housing! Reverse cable install procedure sliding removable housing over the cable and twisting prior to removing cables for replacement. This will make replacing cables easier and faster. If you accidentally removed the temporary poly housing, put a 90 deg bend in a der cable 5 inches from the end. Push the bent cable into top cable port and maneuver and pull into head tube so that you can get a hold of the end of the cable with your fingers. Pull the end of the cable through the head tube so it sticks out several inches. Next push a piece of the poly tubing from the derailleur cable port near bottom bracket shell until it exits into the head tube. Now you should have the poly tubing and a der cable sticking out of the head tube. Push derailleur cable into poly tubing approx 12 inches. You can wrap a small piece of tape around the cable / poly tubing interface to keep them attached if necessary. Gently pull the poly tubing from back into frame by grasping protruding tubing near bottom bracket shell. Once the poly tubing / cable interface are past the top cable port, gently pull cable until cable and poly tubing come through the top cable port. You should have the poly tubing run from top cable port to rear cable port. Put a tab of tape at both ends so it does not pull/fall back into frame. Repeat for other derailleur and rear brake. For a fast explanation and demonstration go to Youtube.com Search “Valdora bikes” on www.YouTube.com for tutorial on running cables when cables and tubing have been removed from frame. Finish Cleaning, washing, waxing compounds available from your local bicycle dealer can be used to keep your bicycle looking sharp. Never submerge your bike in water or spray with a hose. This can damage or decrease the life of your bicycle components. A damp rag and spray bottle will get the job done. If at some point you choose to repaint your Valdora frame – select a painter experienced in the art of painting carbon composite. Paint stripping compounds must NOT be used. Nor should the frame be sand blasted, bead blasted or stripped by any other method. The surface paint should be gently scuffed by hand with sand paper to prepare for painting. Chemical paint strippers or blasting can weaken the composite surface. Failure to follow these instructions could result in serious injury or death. Only an experienced mechanic should assemble! Seat Post The PHX2 frame comes with a proprietary aero seat post. No other seat post will work. Seat tube binder: This is the clamp that is partially bonded to the frame seat tube which holds the seat post. Do not over tighten the seat tube clamp screws. Turn the screw a couple turns evenly alternating between screws until both screws reach the recommended torque. Be careful not to over tighten. Over tightening will result in a stripped clamp. This portion of the clamp is bonded into the frame and will lead to unnecessary expense for repair. Torque both screws to 5 ft. lbs (~7 Nm). Valdora Seat Post / Saddle Compression Clamp **IMPORTANT++ The clamp consists of 6 pieces plus a M6 X 1.0 X 60 MM cap screw and M6 nut. These pieces are 2 cups, 2 cones, and 2 outer wings. See picture below. Insert seat post in the seat tube and lightly tighten the seat tube clamp to temporarily hold the post. (The correct saddle height can be adjusted after saddle is properly attached to seat post.). Insert the seat post with the pointed end forward to achieve a 79 degree seat tube angle with clamp all of the way forward in the oval. OR insert the seat post with the pointy end facing backwards with the clamp all of the way forward to achieve a 76 degree seat tube angle. Do not use grease or friction paste on any parts of this clamp. Clamp pieces may have some abrasive grit residue on surfaces from being tumbled. Do NOT clean this off. Saddle Installation: ● Insert the tabs of the cups into the oval hole in the carbon seat post. ● Insert the cones into the cups on each side. ● Level the surface of the cones that the saddle rails rest on. The cones ARE NOT level in the picture below. ● Use a 10 mm hex wrench to level the cones by inserting the wrench in the large hole in the cones to turn. ● Adjust until saddle sets level or tilts as desired. ● Both sides must be lined up perfectly so that the saddle rails rest flush on the rail surface of the cones. ● Once the cones are leveled, place the saddle rails on the cones. ● Situate saddle rails on cones and adjust fore / aft on as desired. ● Install wing pieces over the outside of saddle rails. Insert cap screw and tighten into the nut. ● Loc-tite may be applied to the threads of the screw if desired. ● Torque the cap screw to approximately 10 ft.lbs / (13.5 Nm). This clamp is a light weight racing component. It attaches with a single fastener. For safety, this bolt should be tested/tightened if needed prior to each ride. 10 ft. lbs. Readjustment of clamp: Valdora’s aero seat post clamp is a compression clamp. It becomes increasingly difficult to separate the cones from the cups once the screw has been tightened and the clamp has been in use on the bicycle. If adjustment is necessary, it may be possible to separate the cups and cones by gripping the cone with needle nose pliers through the 10 mm hole in the cone and a 2 nd set of needle nose pliers or a large screw driver that will fit through the small hole in the cup. The motion of pushing the handles of the tools together may pop the cone out and separate the pieces. Use caution! The cup may become airborne when the pieces separate. Replacement clamps are available from Valdora. .
Load more

Recommended publications
  • Service Manual & Spare Parts
    SERVICE MANUAL SUPERIOR SUE-05 SUPERIOR SERVICE BIKE CATEGORY MANUAL This bikes are equipped with only front suspension fork with short travel and are constructed for “standard” rides, assuming adherence to type-2 operating conditions: Superior would like to congratulate you on the purchase of your new bicycle. We place great emphasis on the choice Type-2 operating conditions of materials and their processing so as to ensure the highest quality of our products, a long service life and great Riding on paved roads and unpaved and gravel roads and trails with moderate grades. functionality. In this set of conditions, contact with irregular terrain and loss of tire contact with the ground may occur. Drops are intended to be limited to 15 cm (6 in.) or less. The Servis Manual contains and specifies certain rules that should be followed if you want to enjoy your high-quality Superior product for many years to come. You have received the Operating Manual with your bike. Superior supplies high-quality bicycles exclusively for specialized shops. These products are already partially pre- assembled. The final assembly of a bike for riding can only be carried out by an authorized Superior dealer. This particularly applies to the basic configuration of suspension components, the front and back derailleurs and braking systems. This will ensure maximum safety when using the product. PREVENTING DAMAGE WARNING WARNING • Avoid contact with hard or sharp items. Do not rest your bike with the top tube of the frame against a column or corner of a building. • When fixing the wheel, place the entire bike in a stand and clamp the seatpost and avoid high side loads; this WARNINGS RELATED TO Any adjustments and modifications can lead to especially applies when replacing the bottom bracket and cranks/crankset.
    [Show full text]
  • 26″ Hyper HBC Cruisers Manual
    The following manual is only a guide to assist you and is not a complete or comprehensive manual of all aspects of maintaining and repairing your bicycle. The bicycle you have purchased is a complex object. Hyper Bicycles recommends that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to properly assemble, repair, or maintain your bicycle. You will save time and the inconvenience of having to go back to the store if you choose to write or call us concerning missing parts, service questions, operating advice, and/or assembly questions. 177 Malaga Park Dr. Malaga, NJ 08328 Call Toll Free SERIAL NUMBER LOCATION 1-866-204-9737 Local 417-206-0563 Bottom View Fax: 775-248-5155 Monday-Friday 8:00AM to 5:00PM (CST) For product related questions email us at: [email protected] For customer service questions email us at: [email protected] IMPORTANT NOTICE WRITE YOUR SERIAL NUMBER HERE serial number Keep your serial number handy in case of damage, loss or theft. B I C Y C L E O W N E R ’ S M A N U A L Contents SAFETY Safety Equipment 2 Mechanical Safety Check 3 Riding Safety 5 IMPORTANT NOTE TO PARENTS 5 Rules of the Road 7 Rules of the Trail 9 Wet Weather Riding 10 Night Riding 10 Bicycling in Traffic 12 ASSEMBLY, MAINTENANCE May not be May not be AND ADJUSTMENT exactly as exactly as illustrated illustrated Fenders 30 NEW OWNER Warranty 36 Purchase Record 37 VISIT US ONLINE@ M A X W E I G H T : 2 7 5 l b s www.hyperbicycles.com This manual contains important safety, performance If you have a problem, do not return to the store, and maintenance information.
    [Show full text]
  • Lefty Ocho Owner’S Manual Supplement © 2018 Cycling Sports Group Lefty Ocho Owner’S Manual Supplement 134923 (07/2018)
    134923 Warning! Read this supplement and your cannondale bicycle owner’s manual. Both contain important safety information. Keep both for future reference. Lefty Ocho WWW.CANNONDALE.COM Owner’s manual supplement © 2018 Cycling Sports Group Lefty Ocho Owner’s Manual Supplement 134923 (07/2018) CANNONDALE USA CANNONDALE EUROPE CANNONDALE UK Cycling Sports Group, Inc. Cycling Sports Group Europe, B.V. Cycling Sports Group 1 Cannondale Way, Hanzepoort 27, 7570 GC, Oldenzaal, Vantage Way, The Fulcrum, Wilton CT, 06897, USA www.cannondale.com Poole, Dorset, BH12 4NU www.cannondale.com [email protected] 018_ Lefty Ocho OMS CVR_print.indd 1 11.06.18 15:40 LEFTY OCHO - OWNERS MANUAL SUPPLEMENT ENGLISH Explicit Definitions CONTENTS In this supplement, particularly important information is presented in the following ways: Safety Information .................................................2-5 Technical Information...........................................6-17 Indicates a hazardous situation which, if not avoided, may Maintenance ...........................................................18 result in death or serious injury. NOTICE Indicates special precautions that must be taken to avoid damage. Cannondale Supplements This manual is a “supplement” to your Cannondale Bicycle Owner’s Manual. This supplement provides additional and important model specific safety, maintenance, and technical information. It may be one of several important manuals/supplements for your bike; obtain and read all of them. Your Authorized Please contact your Authorized Cannondale Dealer immediately Cannondale Dealer if you need a manual or supplement, or have a question about To make sure your bike is serviced and maintained correctly, and your bike. You may also contact us using the appropriate country/ that you protect applicable warranties, please coordinate all service region/location information.
    [Show full text]
  • Volagi Viaje Apex 9
    SPECIFICATIONS 8. Fork offset: 5cm Road Test VOLAGI VIAJE APEX 9. Wheelbase: 99.8cm 10. Standover height: 80cm Price: $2,620 11. Frame: Double Butted 4130 Sizes Available: 50, 53, 55, 57, Chromoly steel, Long Bow 60, and 63cm Flex Stays Size Tested: 55cm 12. Fork: Full carbon, 1 1/8” – 1 Weight: 21 lbs. (without pedals) 1/2” tapered steerer 13. Rims: Volagi E7 Ignite XL 32 TEST BIKE MEASUREMENTS hole 1. Seat tube: 52.5cm (center to 14. Hubs: Volagi cartridge sealed top of seat collar) bearing 2. Effective Top tube: 54.4cm 15. Spokes: Sandvik T302 double- 3. Head tube angle: 72° butted with brass nipples 4. Seat tube angle: 73.5° 16. Tires: Jack Brown 700 x 33.3 5. Chainstays: 41.5cm 17. Bottom bracket: FSA 386EVO w/SR adapter 6. Bottom Bracket drop: 7cm 7. Crank spindle height above VOLAGI VIAJE APEX ground: 27.2cm BY JOSH TACK ➺GRAVEL bikes got quite a bit of buzz last year, and you’re going to hear a lot more about them during the 2014 riding season. If you’re unsure of what I mean by a “gravel bike,” it’s a bike that fills the void between touring and cyclocross bikes, yet it’s not quite a randonneur bike. In this case, the void is pretty small, but it’s an area the bicycle industry sees an opportunity to expand in. When I first set eyes on the Volagi Viaje, my intuition was to add it into the gravel-bike column. It has clearance for wide tires, shorter chainstays than you’d find on traditional touring bikes, yet a tall head tube for comfort, and a system to absorb vibration in the back.
    [Show full text]
  • Owner's Manual
    OWNER’S MOUNTAIN BIKE MANUAL THIS MANUAL CONTAINS IMPORTANT SAFETY, PERFORMANCE AND MAINTENANCE INFORMATION. READ THE MANUAL BEFORE TAKING YOUR FIRST RIDE ON YOUR NEW BICYCLE, AND KEEP THE MANUAL HANDY OF FUTURE REFERENCE. DO NOT return this item to the store. Questions or comments? 1-800-551-0032 NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the exact appearance of the actual product. Specifications are subject to change without notice. HELMET USE & GENERAL MANUAL DISCLAIMER NOTE: The illustrations in this manual are used simply to provide examples; the components of your bicycle might differ. In addition, some of the parts shown might be optional and not part your bicycle’s standard equipment. The following manual is only a guide to assist you and is not a complete or comprehensive manual of all aspects of maintaining and repairing your bicycle. If you are not comfortable, or lack the skills or tools to assemble the bicycle yourself, you should take it to a qualified mechanic at a bicycle shop. Additionally, you can write or call us concerning missing parts or assembly questions. WARNING/IMPORTANT: Take notice of this symbol throughout this manual and pay particular attention to the instructions blocked off and preceded by this symbol. Dynacraft 1-800-551-0032 89 South Kelly Road, American Canyon, CA 94503 2 www.dynacraftbike.com HELMETS SAVE LIVES! WARNING: Always wear a properly fitted helmet when you ride your bicycle. Do not ride at night. Avoid riding in wet conditions. Correct fitting Incorrect fitting Make sure your helmet covers Forehead is exposed and vulnerable your forehead.
    [Show full text]
  • Sidecar Construction 101 - Andrew Fairbank
    Sidecar Construction 101 - Andrew Fairbank I can't explain what drives me to pick up a hacksaw and start cutting up an inherently unstable vehicle, a motorcycle, and build it into an unstable and asymmetrical one, a sidecar. In many ways, a motorcycle is an unsuitable vehicle to make into a racing sidecar. The steering geometry is all wrong, the riding position is too high, the wheelbase is too short, and the wheels are too large in diameter. Although one could bolt a sidecar platform to a stock motorcycle and go racing, I wouldn't recommend it. The classic and super vintage sidecars we race should be able to be driven around corners with one hand, they shouldn't wobble uncontrollably, and they should be able to withstand at least a seasons? racing without major failures. These are not lofty goals. These are aspects of our class we can assume as long as those building rigs take care to adhere to sound engineering principles. A racing sidecar should be a purpose built vehicle with a frame structure suited to the particular stresses to which it will be exposed. This requires quite a bit of reconstruction of the donor vehicle. I like to use a portion of the frame which the engine came in because the engine mounts are there, the swing arm is aligned to the trans output shaft and usually some part of the front down tube or tubes is long enough to attach the new steering head to. When I design a new rig I start with the steering geometry.
    [Show full text]
  • The Recyclery Collective: Complete Overhaul 101 Week 1 Shop Space / Bicycle Types / Tools
    The Recyclery Collective: Complete Overhaul 101 Week 1 Shop space / Bicycle types / Tools Shop space & The Recyclery Mission Statement: "The Recyclery Collective seeks to build community through the restoration of donated and discarded bicycles. We share resources and knowledge in order to support an affordable, independent, and sustainable mode of transportation. In this spirit of education and mutual aid, we encourage discussion about how our transportation choices affect the health of our communities and our environment." While we do have a small paid staff, we are primarily run by volunteer labor. Volunteers do everything from running bicycle sales, picking up donated bicycles, repairing bicycles for sale, helping run open-shop, cleaning and rearranging the shop, etc. The small staff is Jesse who does bookkeeping and mechanics as needed to keep up with bike sale demand. Youth Classes - Howard Area Community Center and Project NIA Complete Overhaul 101 - Advanced Repair Course. Income goes back into improving the shop and supporting our mission. Participants are encouraged to volunteer and spread the word about the Recyclery to friends and family! FreeCyclery - By connecting with social service organizations in our area, we build relationships and donate bicycles to those in need free bikes provide needed self-sufficiency and practical transportation to individuals with low incomes, mental illness, or homelessness. Chicago House Connections for the Homeless Ethiopian Community Association of Chicago Expanding Lives Franciscan Outreach Association Goldie’s Place Heartland Alliance Howard Area Community Center Inspiration Corporation LIFT Chicago Refugee One Stockton School Thresholds Youth Organization Umbrella Open Shop - We provide a valuable resource and environment in which people can repair their own bicycles, aid others in bicycle repairs, or volunteer their time to repair bicycles for the collective.
    [Show full text]
  • Bicycle Owner's Manual
    PRE-RIDE CHECKLIST Bicycle Are you wearing a helmet and other Are your wheels’ quick-releases properly appropriate equipment and clothing, such fastened? Be sure to read the section on proper as protective glasses and gloves? Do not wear operation of quick-release skewers (See PART I, loose clothing that could become entangled in Section 4.A Wheels). Owner‘s Manual the bicycle (See PART I, Section 2.A The Basics). Are your front and rear brakes functioning Are your seatpost and stem securely fastened? properly? With V-brakes, the quick release Twist the handlebars firmly from side to side “noodle” must be properly installed. With while holding the front wheel between your cantilever brakes, the quick release straddle knees. The stem must not move in the steering cable must be properly attached. With caliper tube. Similarly, the seatpost must be secure in brakes the quick release lever must be closed. the seat tube (See PART I, Section 3. Fit). With any rim brake, the brake pads must make firm contact with the rim without the brake Are you visible to motorists? If you are riding at levers hitting the handlebar grip (See PART I, dusk, dawn or at night, you must make yourself Section 4.C Brakes). visible to motorists. Use front and rear lights With hydraulic disc brakes, check that the and a strobe or blinker. Reflectors alone do BICYCLE not provide adequate visibility. Wear reflective lever feels firm, does not move too close to the clothing (See PART I, Section 2.E Night Riding handlebar grip, and there is no evidence of and PART II, A.
    [Show full text]
  • 2008 Bike Catalog
    JA2008 BIKE CATALOG MIS ROAD 7-26 HARDTAIL ALUMINUM RACE RACE CARBON Dakota Elite 57 Xenith SL 9 Dakota Comp 58 Xenith Team 10 Dakota Sport 58 Xenith Pro 10 HARDTAIL STEEL RACE Xenith Race 11 Dragon Pro 59 Xenith Comp 12 Dragon Comp 60 TRIatHLON / TIME TRIAL TRAIL BIKES 61-68 Xenith T2 13 ˙Photo: ©2007 HAROOKZ.COM Xenith T1 14 29’ER & SINGLESPEED Trilogy 15 Dragon 29’er 63 Comet 15 Dakota 29’er 64 Exile 29’er Singlespeed 64 CYCLOCROSS Supernova 17 TRAIL BIKES Nova Pro 18 Durango 3.0 65 Durango 2.0 66 PERFORMANCE ALUMINUM Durango 1.0 66 Ventura Elite 19 Trail X3 67 Ventura Race 20 Trail X2 68 Ventura Comp 21 Trail X1 68 Ventura Sport 22 Trail XR 68 PERFORMANCE STEEL Quest 23 COMFORT BIKES 69-76 Satellite 24 EXPLORER SERIES Explorer 3.0 71 TOURING Explorer 2.0 72 Aurora Elite 25 Explorer 1.0 72 Aurora 26 EARTH CRUISERS TRACK/ FIXED GEAR Earth Cruiser 3 73 Sonik 16 Earth Cruiser 1 74 Sputnik 26 Earth Cruiser 2 74 STREET 27-40 BOSS CRUISERS STREET PERFORMANCE Boss Cruiser 7-Speed 75 Allegro 3 29 Boss Cruiser Coaster 76 Allegro 2 30 Allegro 1 30 TAXI Coda Elite 31 Taxi 76 Coda Comp 32 YOUTH 77-82 Coda Sport 33 Coda 34 X.24 79 Capri 24 80 COMMUTER SERIES X.20 79 Commuter 4.0 35 Capri 20 80 Commuter 3.0 36 Laser 20 79 Commuter2.0 36 Starlite 20 80 Commuter 1.0 36 Laser 16 81 CROSS Miss Daisy 16 82 Allegro 3X 37 Hot Rod 12 81 Ladybug 12 82 Allegro 2X 38 Allegro 1X 38 JAMIS FRAMESETS 83-84 Citizen 3.0 39 Citizen 2.0 40 JAMIS FEMME MODELS Citizen 1.0 40 ROAD Xenith Comp 12 GRAVITY 41-50 Ventura Race 20 FREERIDE Ventura Sport 22 Dakar BAM 2.0 43 Quest 24 Dakar BAM 1.0 44 Satellite 24 ALL-MOUNTAIN/ PARK BIKES HARDTAILS Dakar XAM 2.0 45 Dakota Comp 58 Dakar XAM 1.0 46 Durango 1.0 66 Parker III 47 STREET BIKES Parker II 48 Coda 34 Parker I 48 SPECIFICATIONS Komodo II 49 Frame Geometry 85-87 Komodo I 49 Specifications 88-98 Kromo 50 CROSS COUNTRY 51-60 FULL SUSPENSION CARBON RACE Dakar XCR Team 53 Dakar XCR Pro 54 2008 JAMIS FULL SUSPENSION ALUMINUM Dakar XCR Expert 55 Dakar XCR Comp 56 Dakar XCR Sport 56 Dakar XC 56 2008 JAMIS We’ve spent 29 years not settling for good-enough.
    [Show full text]
  • SRM User Manual English Language 4Th Edition
    SRM User Manual English Language 4th Edition Author: Andrea Wooles ©2007 Schoberer Rad Meßtechnik Table of Contents Introduction Why use an SRM? Why is SRM the best choice for power measurement? ...................................8 History of the company ....................................................................................................................................9 How to get support ...........................................................................................................................................10 What’s in the box? .............................................................................................................................................11 Setting up your SRM System (an overview)................................................................................................12 Part I: Put your SRMs on your bike What tools do I need? .......................................................................................................................................13 Check that all of the parts are working ......................................................................................................13 Mount the handlebar clip for the PowerControl ....................................................................................14 Mount the power sensor .................................................................................................................................14 Specific Instructions for Road Frames ....................................................................................15
    [Show full text]
  • List of Bicycle Parts
    List of bicycle parts Bicycle parts For other cycling related terms (besides parts) see Glossary of cycling. List of bicycle parts by alphabetic order: Axle: as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates. Also sometimes used to describe suspension components, for example a swing arm pivot axle Bar ends: extensions at the end of straight handlebars to allow for multiple hand positions Bar plugs or end caps: plugs for the ends of handlebars Basket: cargo carrier Bearing: a device that facilitates rotation by reducing friction Bell: an audible device for warning pedestrians and other cyclists Belt-drive: alternative to chain-drive Bicycle brake cable: see Cable Bottle cage: a holder for a water bottle Bottom bracket: The bearing system that the pedals (and cranks) rotate around. Contains a spindle to which the crankset is attached and the bearings themselves. There is a bearing surface on the spindle, and on each of the cups that thread into the frame. The bottom bracket may be overhaulable (an adjustable bottom bracket) or not overhaulable (a cartridge bottom bracket). The bottom bracket fits inside the bottom bracket shell, which is part of the bicycle frame Brake: devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward Brake lever:
    [Show full text]
  • Operating Manual Translation of the Original Instruction Manual
    Operating manual Translation of the Original instruction manual Trekking/Touring bike City bike Youth bike Single speed/Fixie According to Breezer Bikes is a trademark of ASI Corp. ISO 4210:2014 www.advancedsports.com Pedelec/e-bike According to © ASI EN 15194 Dear Customer, To start with, we’d like to provide you with some important information Before riding your bicycle on public roads, you should inform yourself about your new bicycle. This will help you make the most of its benefits about the applicable national regulations in your specific country. and avoid any possible risks. Please read this instruction manual carefully Firstly, here are a few important pointers as to the rider’s person which are and keep it for your future reference. also very important: Your bicycle has been handed over to you fully assembled and adjusted. • Always wear a suitable bicycle helmet adjusted to fit your If this is not the case, please contact your specialist retailer to ensure that head and wear it for every ride! this important work is completed or make sure you carefully read the en- • Read the instructions supplied by your helmet manufac- closed assembly instructions and follow all the directions given. turer relating to fitting the helmet properly. It is assumed that users of this product have a basic and sufficient knowl- • Always wear bright clothing or sportswear with reflective edge of how to use bicycles. elements when you ride. This is vital so that other people can SEE YOU. Everyone that: • Always wear tight clothing on your lower body, and trouser clips if required.
    [Show full text]