C&C Building Supplies Inventory Guide Lumber Engineered Lumber

Total Page:16

File Type:pdf, Size:1020Kb

C&C Building Supplies Inventory Guide Lumber Engineered Lumber C&C Building Supplies Inventory Guide Contact Us: 724-696-4701 Lumber Plywood Roofing Windows Framing Lumber Pressure Treated Shingles *7D Industries 2x4, 2x6, 2x8, 2x10, 2x12 1/2”, 3/4” Owens Corning *Sierra Pacific up to 24’ lengths Cabinet Grade Oak & Birch Supreme AR Pressure Treated 1/4”, 1/2”, 3/4” TruDefinition Duration Doors 2x4, 2x6, 2x8, 2x10, 2x12 CDX/Plyscore ProEdge Hip & Ridge Exterior Doors ( #1 MCA Grade) 3/8”, 1/2”, 5/8”, 3/4” CertainTeed 6 Panel Steel 4x4, 4x6, 6x6 Finished Grade Plywood Landmark 9 Lite Steel ( #2 MCA Grade) 1/2”, 3/4” *Masonite 5/4x6 Select Premium Plyform Roofing Supplies *Larson Decking Lauan Owens Corning *Sierra Pacific 1x4, 1x6, 1x8 D&Btr T1-11 Weatherlok (2sq/roll) Interior Doors Pine 4” OC, 8” OC Deck Defense HC 6 Panel Textured 1x4, 1x6, 1x8, 1x10, 1x12 Advantech Pro Armor HC Lauan Premium Grade Tempered Hardboard Ventsure HC Birch 1x6, 1x8 WP4/WP18 Cement Board MFM *Masonite Appearance Pine Fiberock 3x5x1/4, 3x5x1/2 Ice Buster (2sq/roll) 1x4, 1x6, 1x8 Clear White Durock 3x5x1/4, 3x5x1/2 SA Shingle Starter Flooring Pine Titanium UDL-25 #1 Common Red Oak 1x4, 1x6, 1x8, 1x12 C&Btr Drywall Tamko 15#, 30# roofing felt PFJ Primed #1 Common White Oak Ultra Lightweight Regular FBC roof coatings & sealers Pine Moulding *Happy Feet Luxury Vinyl 4x8x3/8, 4x8x1/2, 4x10x1/2, Alcoa Aluminum Products Primed Moulding *UNIBOARD Laminate 4x12x1/2 Cedar *HOMERWOOD Hardwood Mold Tough Metal Roofing 1x4, 1x6, 1x8 #3&Btr *Somerset Hardwood 4x8x1/2 *Metal Sales Inland Red Cedar Plasterbase Manufacturing 1x6 STK T&G V-Joint Ceiling Tile 4x8x1/2 *Central States Western Red Cedar Armstrong Firecode Manufacturing Oak *USG 4x8x5/8 1x4, 1x6, 1x8 S4S Red Oak Insulation Poplar Paneling 1x4, 1x6, 1x8 S4S Siding Owens Corning States Hardwood Vinyl Kraft-Faced *DPI CertainTeed ProCat blown-in® *American Pacific Engineered Lumber *Mastic Roxul LVL 1-3/4” x 9-1/2” *Cellwood Comfort Batt LVL 1-3/4” x 11-7/8” *Crane Safe’n’Sound Bath & Vanities *I-Joists *Georgia Pacific GreenGuard Sterling Plumbing *Trusses Cement 1/2”, 3/4”, 1”, 1-1/2”, 2” *Bertch Cabinetry *Allura Fiber Cement Dow *MAAX Bath Decking & Railing *James Hardi Plank 5-1/2, 7-1/2 Sill Seal *Kitchen Kompact 1/4 Fanfold 5/4x6 Select Premium Treated Stone TimberTech *StoneCraft Retractable Awning *Azek *CertainTeed STONEfacade® Hardwood Pellets Alutex *Genova *Boral Versetta Stone Lignetics Certainteed Somerset Electrical *Color Guard Plumbing *Westbury *Age Craft C&C Building Supplies Disclaimer While we strive to keep this page updated, please know that we at C&C are always exploring new products and material. Please call us to talk more about what we have in stock today! *Indicates SPECIAL ORDER items .
Recommended publications
  • Masonite Siding 101: Why It's Bad News
    Moving into a new home is a great feeling of accomplishment. Fixer-uppers have been a trend in the real estate market for some time now, and for a great reason. Often minor cosmetic adjustments to homes can have a major impact. But what happens when you find a problem that isn’t so DIY-friendly? Discovering masonite siding, also known as "fiberboard" or "hardboard", may unearth more serious problems for an older home. Masonite Siding 101: Hardboard is an engineered wood product that is comparable to particle board. This product is made from compressed wood fibers so it does not have a grain like solid wood. However, a wood veneer may be formatted over the product so it appears to be solid. If you’re unsure if your siding is in fact masonite, check unfinished areas like the attic for manufacturer’s markings. Another way to tell that your home has Masonite is the way that it is deteriorating -- look for flakes, curls and swelling in damaged areas. Masonite is know for extensive use in various industries for its durability and flexibility. During the 1980s and 1990s this product was used as exterior siding for many new construction homes. It was widely used for its low cost compared to regular siding material. Why It's Bad News: As one could imagine, a product with fibers is easily susceptible to moisture damage. The compression process often leaves only one side of the product smooth which proves to be a greater risk for water issues. Over time, masonite swells and rots if continuously exposed to the elements.
    [Show full text]
  • Masonite Interior Door Catalog 2020
    INTERIOR DOORS Unique. Versatile. Timeless. P LIVINGSTON™ 06 Masonite is committed to delivering unsurpassed performance in interior and exterior doors and glass products. We provide much more than a door; we deliver a total experience, giving you a complete line of products, services and support tools designed to enhance curb appeal and the interior aesthetics of a home. We are your leading source for the latest trend insights and design ideas, delivering distinctive doors that complement any style and personal taste. From the crisp, clean lines of our Heritage Series™ to the versatility of our molded panel collection, we offer a breadth of interior doors to meet any design, performance and material need. It’s never been easier to find the perfect door for your home. Solid Core Doors // 02 Heritage Series™ // 08 Flush Series // 14 Interior Doors // 04 West End Collection® // 10 Emerald® “Green” Doors // 15 Livingston™ // 06 Molded Panel Doors // 12 Design and Size Options // 16 2 masonite.com SAFE N’ SOUND SAFE Safe 'N Sound® THE NEW STANDARD SOLID CORE DOORS We are on a mission to put solid core doors in every home. Made of solid material all the way through, they feel more substantial and block sound more effectively. For minimal cost, solid core doors create a dramatic improvement in overall quality. u Solid core doors are SOUND REDUCING they block sound more efficiently than hollow doors. u Solid core doors are simply built better with a strength you can FEEL the moment you open the door. u Solid core doors are DURABLE, able to withstand the dents and dings of normal wear.
    [Show full text]
  • United States Patent (19) 11 Patent Number: 5,718,786 Lindquist Et Al
    IIIUSOO5718786A United States Patent (19) 11 Patent Number: 5,718,786 Lindquist et al. 45 Date of Patent: Feb. 17, 1998 54 FLATORIENTED STRAND BOARD 4,122,236 10/1978 Holman ..................................... 42.5/81 FBER BOARD COMPOSTE STRUCTURE 4,131,705 12/1978 Kubinsky ...... ... 428/106 AND METHOD OF MAKING THE SAME 4,210,692 7/1980 Bohme et al. .......................... 428/106 (List continued on next page.) 75) Inventors: Craig R. Lindquist, Cordele, Ga.; John T. Clarke; Peter P.S. Chin, both FOREIGN PATENT DOCUMENTS of St. Charles, Ill.; Michael J. 597.587 5/1960 Canada .................................. 428/106 MacDonald, Batavia, Ill.; J. Peter GM 7704 Walsh, Sycamore, Ill. 563 5/1978 Germany. OS 26 58 784 7/1978 Germany ............................... 478/106 73) Assignee: Masonite Corporation. Chicago, Ill. 1116054 6/1968 United Kingdom. 1576140 10/1980 United Kingdom. (21) Appl. No.: 480,439 OTHER PUBLICATIONS 22 Filed: Jun. 7, 1995 Maloney et al., “Modern Particleboard & Dry-Process Related U.S. Application Data Fiberboard Manufacturing." Miller Freeman Publications, pp. 105-107. 60) Division of Ser. No. 052,375, Apr. 23, 1993, Pat. No. Moslemi et al., in Paticleboard, Volume 2: Technology, 5,470,631, which is a continuation-in-part of Ser. No. 670, Southern Illinois University Press, pp. 16-23. 681, Mar. 20, 1991, abandoned, which is a continuation-in Siemplekamp Bulletin, dated Mar. 4, 1988, p. 6. part of Ser. No. 503,573, Apr. 3, 1990, abandoned. (51) Int. Cl. ....................... B27N3/00; B32B 31/04 Primary Examiner-Nasser Ahmad 52 U.S. Cl. ...................... 156/622; 156/62.4; 156/62.8; Attorney; Agent, or Firm-Marshall, O'Toole, Gerstein, 162/100; 162/103; 428/105; 428/106; 428/109; Murray & Borun 428/1.12; 428/212; 428/213; 428/218; 428/219; 57 ABSTRACT 428/220; 428/326 (58) Field of Search ................................
    [Show full text]
  • Density, Modulus of Elasticity, Creep, and Durability of Hardboard A
    Density, Modulus of United States Department of Agriculture Elasticity, Creep, Forest Service Bibliographies and Durability of and Literature of Agriculture 126 Washington, D.C. Hardboard February 1994 A Bibliography Abstract The references in this literature review cover four areas related to hardboard: (1) density or specific gravity,, (2) modulus of elasticity (MOE) and stiffness, (3) dimen­ sional stability and water resistance, and (4) weathering and accelerated aging. The purpose of the literature search was to provide a starting point for discussing directions for suture research and ways to improve the performance of hardboard products. The annotations encapsulate important research results. The majority of the references are grouped first by research area and then by type of hardboard fiber-mat forming process (dry, wet, or dry and wet processes). The final section of the publication includes references on North American hardboard standards and test methods for both dry and wet processes. The study on which this publication was based was funded by the American Hardboard Association, Palatine, Illinois; U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, Wisconsin; and Illinois Agricultural Experiment Station, University of Illinois, Urbana, Illinois. Acknowledgement The compilation of this comprehensive bibliography would not have been possible without the assistance of many individuals Particular thanks are given to J. Dobbin McNatt and Gary C. Myers, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, Wisconsin, and Damon H. Lipinski, Research Assistant, Department of Forestry, University of Illinois, Urbana-Champaign, for their reference search, help in locating original sources, and review. Thanks are due to the American Hardboard Association (AHA), Palatine, Illinois, for the funding that enabled the authors to undertake this study.
    [Show full text]
  • Wood Flooring
    DESIGN REQUIREMENTS WOOD FLOORING GENERAL INFORMATION 1.1 This section applies to factory finished wood strip flooring. 1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards. 1.3 Warranty: Provide manufacturer’s standard one-year warranty. DESIGN REQUIREMENTS 2.1 Prefinished Solid Hardwood Strip Flooring: ¾” thick; in species as required for project (to be approved by Facilities); Grade: Clear/Select; Width: 3-1/4” (or as required for project); Length: Random, with 6’-0” maximum, 2’-0” minimum, and 4’-0” average lengths. Edge: Tongue and Groove; End: Matched (tongue and groove). 2.2 Factory finishing: Factory machine sand hardwood strip flooring to smooth even finish with no evidence of sander marks. Apply one seal coat followed by finish coats of urethane. Cure. 2.3 Acceptable subfloor materials include plywood and oriented strand board, depending on application. Particleboard and Masonite are not acceptable substrates. 2.4 Wood sleepers, plywood sheathing, blocking, and other framing accessories: a. Subfloor filler and patching compound: Gray cement based type as recommended by flooring manufacturer b. Wood Floor Adhesive: 100 percent urethane floor adhesive as recommended by flooring manufacturer. c. Sheet vapor retarder: Black polyethylene sheeting, 8 mils thick. Provide reinforced, self-adhesive, 2 inches (51 mm) minimum width tape for sealing seams. LAST REVISED: JUNE 12, 2011 DESIGN REQUIREMENTS d. Underlayment: Asphalt impregnated, weather resistant, water-vapor permeable building felt paper. Dry tensile strength: 20 psi minimum in both directions. Maximum water vapor transmission: 35 grams per square meter per 24 hours. e. Sound isolation underlayment: Cork or compressed fiber, if required.
    [Show full text]
  • Masonite Hardboard Siding
    A Sure-Look Home Inspections 3025 Mill Stream Court, Matthews, NC 28104 Tel: 704-488-4469 Fax: 704-882-8879 [email protected] www.asurelook.com FACT SHEET: MASONITE HARDBOARD SIDING Hardboard , also called high-density fiberboard , is a type of fiberboard , which is an engineered wood product. It is similar to particleboard and medium-density fiberboard , but is more dense and much harder because it is made out of exploded wood fibers that have been highly compressed. It is referred to as Masonite in the USA because that was the first brand to be marketed there in the 1920s (25 years after it was invented in England). Unlike solid wood , it is very homogeneous with no grain. However, a wood veneer can be glued onto it to give the appearance of solid wood . Other overlays include formica and vinyl . It has many uses, such as a substrate, but unlike plywood and solid wood, it has no significant structural strength. It is used in construction , furniture , appliances , automobiles and cabinetry , and is popular among acrylic and oil painters as a painting surface due to its economical price (though it must be coated with gesso or canvas before use). It is also used as the final layer in many skateboard ramps and the half- pipe . Hardboard is produced in either a wet or dry process, which produce a panel called S1S or S2S respectively. The wet process only leaves one smooth side, but dry processed hardboard is smooth on both sides. Like other types of fiberboard, hardboard is susceptible to moisture damage and is generally not used outside.
    [Show full text]
  • 74363 Södra Pollmeier Spruce LVL-S Beams [4].Indd
    Pollmeier Spruce LVL-S Beams Engineered Wood Products represent a bold step forward, not only in terms of ease of use, excellent performance, and cost saving characteristics, but in the environmental credentials they offer to specifiers and end users who are increasingly required to prove the eco ratings of the buildings they construct. The performance of Engineered Wood Products can be accurately predicted which means we can fine tune a design so that exactly the right amount of product is employed for any given situation. Södra Wood is a leading supplier of Engineered Wood Products to the UK market and has a wealth of experience in the storage, handling and distribution of these high quality materials. Pollmeier Spruce LVL-S is part of the Södra Wood EWP System which includes Masonite I-Joists, LVL Rim Board and Glulam beams. Information on these products is also available. FEATURES BENEFITS Laminated Veneer Lumber Stable, strong and reliable engineered wood product that will not shrink, twist, cup or bow like solid timber Adaptability Can be used in masonry or timber frame construction Wide Range of Products Competitive and compatible solutions High Modulus of Elasticity Allows more flexibility in design and smaller material cross sections Tolerant of Holes and Notches Allows access for services in accordance with structurally designed holes Technical Support Team Expert help is on hand for engineering and design queries Forest Certification Full PEFC chain of custody Full load orders (min 45m3 mixed loads) from landed stock are available on a 48hr Just In Time (JIT) delivery basis, full load direct deliveries are also available.
    [Show full text]
  • Lumber & Wood Catalog 2021
    South City Lumber & Supply LUMBER & WOOD CATALOG 2021 Lumber & Wood 650 588-5711 Douglas Fir Framing Lumber Redwood Std/#2 & #1/Btr S4S Select Heart 2x4 to 2x12 8’ to 20’ 1x4, 1x6 8’, 10’, 12’, 16’, 20’ Select Heart B Decking 2x4 to 2x12 12’, 16’, 20’ 2x4 8’ to 20’ Construction Heart 2x6 8’ to 20’ 2x6 to 2x12 8’ to 24’ Larger sizes and timbers available via Special Order. 2x14 8’, 10’, 12’, 16’, 20’, 24’ Rough-sawn Redwood 3x4, 3x6 8’, 10’, 12’, 16’, 20’ 3x8, 3x12 Random lengths Construction Heart 1x4, 1x6, 1x8, 1x12 8’ to 20’ 4x4 to 4x12 8’ to 20’ Construction Heart 2x4, 2x6, 2x8, 2x12 8’, 10’, 12’, 16’, 20’ 4x14 8’, 10’, 12’, 16’, 20’, 24’ Rough-sawn, aka saw-textured, is resawn for a rustic appearance and is 6x6 to 6x12 8’ to 20’ sized a little thicker and wider than surfaced lumber. Common sizes and grades available unseasoned (GRN). Wood Fencing Douglas Fir S-DRY Framing Lumber Redwood & Cedar Select Structural #1 S4S 1x6 Redwood 5’, 6’ 1x8 Redwood 5’, 6’, 8’ 2x4 to 2x12 8’, 10’, 12’, 16’, 18’, 20’ 1x8 Cedar 5’, 6’ S-DRY = Surfaced Dry / 19% moisture content when surfaced at the Mill. 8’ Fence Posts Redwood / Pressure Treated Redwood Lattice Heavy duty, Diagonal or Square Pattern Engineered Wood Products Fence Panel 4x8 panel Laminated Veneer Lumber (LVL) Cedar Split Rail Fencing Our Redwood products are all sustainably harvested. 1-3/4 x 7-1/4 to 1-3/4 x 14 16’, 20’, 25’ Kiln Dried Lumber (KD) Parallel Strand Lumber (PSL) Redwood Clear All Heart KD 1x2 to 1x12 3-1/2 x 9-1/2 to 3-1/2 x 14 16’, 20’, 25’ 2x2 to 2x12 5-1/4 x 9-1/2 to 5-1/4 x 14 16’, 20’, 25’ 4x4 I-Joist Cedar Clear VG KD 1x6, 1x8 2x6, 2x8 I-Joist Full inventory available via Special Order Douglas Fir Clear VG KD 1x2 to 1x12 Custom sizes or larger sizes/longer lengths are available via Special Order.
    [Show full text]
  • Acetylation of Wood 1945–1966
    Review USDA Forest Service Forest Products Laboratory: Acetylation of Wood 1945–1966 Rebecca E. Ibach 1,* and Roger M. Rowell 2 1 Forest Biopolymers Science and Engineering, Forest Products Laboratory, USDA Forest Service, Madison, WI 53726, USA 2 Biological Systems Engineering, University of Wisconsin, Madison, WI 53706, USA; [email protected] * Correspondence: [email protected] Abstract: The first research on acetylation of wood started in 1928, and the first research done on acetylation of wood at the USDA Forest Service Forest Products Laboratory (FPL) started in 1945. This is a review of the research done between 1945 and 1966 at the FPL. This research was the first to show that acetylated wood was both decay-resistant and dimensionally stable. It was the pioneering research that ultimately led to the commercial production of acetylated wood. Keywords: history; decay resistance; dimensional stability; acetylation 1. Introduction The first experiment in the acetylation of wood was in Germany by Fuchs in 1928 using acetic anhydride and sulfuric acid as a catalyst [1]. Fuchs found an acetyl weight gain of over 40 percent, and he used the acetylated wood to isolate lignin from pine. In the same year, Horn acetylated beech wood to remove hemicelluloses in a similar lignin Citation: Ibach, R.E.; Rowell, R.M. isolation procedure [2]. In addition, in 1928, Suida and Titsch acetylated powdered beech USDA Forest Service Forest Products and pine using pyridine or dimethylaniline as a catalyst to yield an acetyl weight gain of Laboratory: Acetylation of Wood 30 to 35 percent after 15 to 35 days at 100 ◦C[3].
    [Show full text]
  • Parallel Strand Lumber (PSL) –Parallam™ • Laminated Strand Lumber (LSL) – Timberstrand™ • I-Joists (I-Beams) – Masonitebalken™, TJI™ Examples
    Engineered Wood Products for Structural Purposes Charlotte Bengtsson SP Trätek Växjö University Contents • General about EWP •Productioncontrol • Overview over EWPs •New developments EWP definition • EWP are made from ”pieces” of timber which are arranged or formed for structural purposes. Bonding with adhesives or heat and pressure. • General concept Cut in smaller pieces and re-assemble (reducing defects) Tailor-made structural members •Resulting products more homogeneous less variability (less orthotropic) EWP - general • Overcoming weaknesses of solid wood • Taking advantage of low-quality raw material • Structural members of “any size” • Less variability in material properties – higher design strength Diff. in design value Diff. in mean value Number of beams Strength EWP - general • Strong • Large interval of spans • Made with durable adhesives • Dimensionally stable – Made from dry material Structural Timber Strength [MPa] C24 24 C30 30 Glulam GL32 32 GL36 36 LVL 40-50 EWP - general • Accurate production control is required • Sometimes, 3rd party surveillance is required • Development of Plywood started beginning of 20 century • Glulam was developed early 19th century – C.F. Wiebking (1762-1842) Examples • Glued-laminated timber (glulam) • Laminated Veneer Lumber (LVL) – Kerto™, Microllam™ • Parallel Strand Lumber (PSL) –Parallam™ • Laminated Strand Lumber (LSL) – TimberStrand™ • I-Joists (I-beams) – Masonitebalken™, TJI™ Examples • Oriented Strand Board (OSB) • Plywood • High Density Fibre Board (HDF) –Masonite™ •Particleboard Production
    [Show full text]
  • Environmental Product Declaration (EPD) Conforms to ISO 14025, 14040, ISO 14044, and ISO 21930
    Environmental Product Declaration Masonite® Architectural ARCHITECTURAL Masonite Architectural One Tampa City Center 201 North Franklin Street, Suite 300 Tampa, Florida 33602 www.masonitearchitectural.com Product This declaration represents the production-weighted average wood door leaf, manufactured by Masonite Architectural at the following locations: §§Masonite Architectural – Algoma, WI §§Masonite Architectural – Jefferson City, TN §§Masonite Architectural – Largo, FL §§Masonite Architectural – London, Ontario §§Masonite Architectural – Marshfield, WI §§Masonite Architectural – Northumberland, PA §§Masonite Architectural – Saint-Ephrem, Quebec Functional Unit The declared unit is a wood door leaf, measuring 21 ft2 (1.95 m2) at a nominal 1-3/4 inch (44.45 mm) thickness. Results represent a production weighted average wood door leaf. EPD Number and Period of Validity SCS-EPD-04154 Beginning Date: September 13, 2016 – End Date: September 12, 2021 Version: August 9, 2017 Product Category Rule Product Category Rule for Preparing an Environmental Product Declaration for Interior Architectural Wood Door Leaves (March 2015). Program Operator SCS Global Services 2000 Powell Street, Ste. 600, Emeryville, CA 94608 +1.510.452.8000 | www.SCSglobalServices.com Environmental Product Declaration Masonite® Architectural Table of Contents Product and Company Information . cover Company Description . 3 Product Scope . 3 Material Content . 4 Product Life Cycle Flow Diagram. .5 Additional Environmental Information. 6 Life Cycle Assessment Stages and Reported Information . .8 Life Cycle Impact Assessment. .8 References . 15 Disclaimers: This Environmental Product Declaration (EPD) conforms to ISO 14025, 14040, ISO 14044, and ISO 21930. This declaration is an environmental product declaration in accordance with ISO 14025 that describes environmental characteristics of the described product and provides transparency and disclosure of environmental impacts.
    [Show full text]
  • Technical & Installation Guide
    TECHNICAL & INSTALLATION GUIDE Note: This Guide supercedes all printed technical materials produced for Shaw. INSTALLATION GUIDE TABLE OF CONTENTS PAGES Installation, Subfloor & Underlayment Requirements 2-3 Subfloor Preparations 4-6 Installation Instructions Tile 7 Installation Instructions Plank 8 Sumter Maintenance Instructions 9-10 Appendix Trouble Shooting Tips 11-13 INSTALLATION, SUBFLOOR AND UNDERLAYMENT REQUIREMENTS Approved subfloors: a. Concrete: The concrete must be free of any curing compounds or adhesives. Even after old glued down carpet has been removed, and the subfloor has been scraped, it should NOT be assumed that the concrete is porous. Often the old adhesive has sealed the floor. A porosity test, using water, should be taken. Be aware that porous subfloors may take a different adhesive than non-porous subfloors. See adhesive instructions. If oil, grease, or other contaminants have deeply penetrated the concrete, and cannot be thoroughly removed, Shaw cannot be installed. If latex liquid has been used to seal off old cutback adhesives, the concrete has become non-porous. b. Lightweight concretes: Concretes in the lower end of this range are generally used for thermal and sound insulation fills for roofs, walls, and floors. The higher densities are used in cast-in-place walls, floors, roofs, and for pre-cast elements. The minimum density of the concrete should be greater than 90 lbs per cubic foot. The minimum compressive strength should be 3,500 psi or greater. Gypsum-based concretes are not recommended. If installing over gypsum or other forms of light concrete always apply an Acrylic based Primer-Sealer coat before toweling adhesive.
    [Show full text]