ATX-945G Industrial in ATX form factor with ® 945G

Supports Intel® Core™2 Duo, Pentium® D CPU on LGA775 socket 1066/800/533MHz Front Side Bus Intel® Graphics Media Accelerator 950 Dual Channel DDR2 DIMM, maximum 4GB Integrated PCI Express LAN, USB 2.0 and SATA 3Gb/s ATX-945G Product Overview

The ATX-945G is an ATX form factor single-processor (x8) and SATA round out the package for a powerful industrial motherboard that is based on the Intel® 945G industrial PC. I/O features of the ATX-945G include a chipset with ICH7 I/O Controller Hub. It supports the Intel® 32-bit/33MHz PCI Bus, 16-bit/8MHz ISA bus, 1x PCI Express Core™2 Duo, Pentium® D, Pentium® 4 with Hyper-Threading x16 slot, 2x PCI Express x1 slots, 3x PCI slots, 1x ISA slot Technology, or ® D Processor on the LGA775 socket, (shared w/ PCI), onboard Gigabit Ethernet, LPC, EIDE Ultra 1066/800/533MHz Front Side Bus, Dual Channel DDR2 DIMM ATA/100, 4 channels SATA 3Gb/s, Mini PCI card slot, UART 667/533/400MHz, up to 4 DIMMs and a maximum of 4GB. The compatible serial ports, parallel port, floppy drive port, HD Intel® Graphic Media Accelerator 950 technology with Audio, and PS/2 Keyboard and Mouse ports. 2048x1536x8bit at 75Hz resolution, PCI Express LAN, USB 2.0

Block Diagram CPU Core™2 Duo Pentium® D LGA775 package 533/800/1066MHz FSB Dual-Core Hyper-Threading

533/800/1066 MHz FSB D I M

Northbridge DDR Channel A M

® x

Intel 945G GMCH 2

DDRII 400/533/667 MHz D I CRT M M DB-15 DDR Channel B

x 2 Discrete PCIe x16 Graphics

DMI Interface 2 GB/s

IDE Device (primary) Marvell GbE (2x) ® PCIe x1 Marvell GbE Intel ICH7 8888EE80805533 R RJJ--4455 CompactFlash EIDE (secondary) ATA PCIe PCIexpress x1 Controller PCIe Slots (2x) SATA ports x4 SATA PCI slots (3x) PCI PCI Bus 32-bit/33MHz bus HD Controller USB 2.0 USB 2.0 LPC Codec (Bracket x4, Internal x4) IT8888G ISA slot (x1) ISA Bridge shared w/ PCI BIOS FWH

MIC-in/Line-out KB/Mouse

LPT1/FDD W83627EHF LPC Super I/O Hardware COM1 Monitor

COM2 ATX-945G Technical Information

Specifications I/O Controller ATX form factor single-processor industrial motherboard LPC Super IO controller W83627EHF Processors On-board LAN Single Processor with Intel® Land Grid Array 775 (LGA775) package Onboard Marvell 88E8053 supports 2 GbE ports on bracket Intel® Core™2 Duo, Pentium® D, Pentium® 4 with Hyper-Threading Support IEEE 802.3x compliant flow control Technology, or Celeron® D Processor Support IEEE 802.3ab Auto-Negotiation of speed, duplex and flow control 1066/800/533MHz Front Side Bus Peripheral Support One IDE channel supports two Ultra ATA 100/66/33 devices Intel® 945G Graphic Hub (GMCH) 4 Channels SATA 3Gb/s Intel® I/O Controller Hub 7 (ICH7) CompactFlash Type II socket BIOS Mini PCI socket Support for 4 Mb Firmware Hub Compliant with USB Specification Rev. 2.0, supports 8 USB 2.0 ports BIOS write protection provides anti-virus capability (Four onboard Type-A connectors, four external) DMI BIOS Support Two 16550 UART compatible serial ports with ESD protection, one UART Supports system soft power-off (via ATX power supply) supports RS232/422/485 interface (jumperless, by BIOS selection) Supports PXE Remote Boot One internal bi-direction parallel port with SPP/ECP/EPP mode Supports boot from USB Device One internal Floppy port System Memory PS/2 Keyboard and Mouse ports Dual Channel DDR2 DIMM 667/533/400MHz, up to 4 DIMMs HD Audio, Line-out, MIC-in Maximum 4GB System Memory Watchdog Timer Graphics 1-255 step (sec/min), can be set with software on Super I/O GMCH analog RGB output on the faceplate. Hardware Monitor Resolution up to 2048 x 1536 at 75Hz. Temperature, fans, and voltage monitoring PCI Express x16 extension slot Fan speed control and monitoring PCI/PCIe/ISA Support Operating Temp. 32-bit/33MHz PCI Bus, 16-bit/8 MHz ISA bus 0ºC - 60ºC 1x PCIe x16 slot, 2x PCIe x1 slots, 3x PCI slots, 1x ISA slot (shared w/ PCI) Certifications Clock Generator CE, FCC Class A Integrated Circuit Systems ICS954101 (CK410)

Product Information

Article Part No. Description ATX-945GPCI-755 BMMB945P-002000T Industrial Motherboard in ATX form factor with Intel® 945G chipset CPU Cooler 0H05CPU92926500L Standard CPU cooler for LGA775 socket (92x92x65.6mm) CPU Cooler (slim) 0H05CPU93932900L Slim CPU cooler for LGA775 socket (93x93x29.5mm) Cooler Retention Plate 0H05HSEBWN77500L Retention Plate for CPU cooler

5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District, Taipei, Taiwan 114 T +886-2-2799-2789 F +886-2-2799-7399 [email protected] www.quanmax.com