A061 A064 A041/K041

Total Page：16

File Type：pdf, Size：1020Kb

A041/K041 K041 AEG® , ALPINA® ELECTRIC, BERNARD, BOSCH, CASTOR® ELECTRIC, CRAFTSMAN®, DOLMAR®, ECHO®, EFCO®, EINHELL, ESPER, HITACHI, HUSQVARNA®, OPEM, IKRA, JOBU, MAFELL, MAKITA®, MC CULLOCH®, OLEO-MAC®, PARTNER®, POULAN®, RYOBI®, SHINDAIWA®/SDK/ISEKI, SHINGU, SKIL®, STANLEY®, STEINMAX, TANAKA®, ZENOAH® T041 THIS BAR IS BEING OBS. A061 HOMELITE®, BANDIT, SABRE T061 THIS BAR IS BEING OBS. A064 DANARM, DYNAMAK, EINHELL, FRONTIER, HUSQVARNA®, JOBU, JONSERED®, LOMBARD, PARTNER®, PIONEER, SKIL® OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. A - 63 www.oregonchain.eu A074 ALPINA®, CASTOR®, GARDEN, METABO®, OLEO-MAC®, STIHL® T074 A095/K095 K095 ALKO, ALPINA®, ISOFLOAT BLITZ, CASTOR®, ISOFLOAT, DOLMAR®, DYNAMAC, FOLUX, FRONTIER, HANDY, HOMELITE®, OPEM, HUSQVARNA®, JOBU, JONSERED®, MAFELL, MC CULLOCH®, MONDIAL, NAUTAC, OLEOMAC, PARTNER®, MINIFARMERSAW, PIONEER, SHINDAiWA®, STANLEY®, ZENOAH® T095 A218/A318 A218 ALKO, BELL PICKPINE, BLACK&DECKER®, BULLCRAFT, MC CULLOCH®, POWER PRUNER®, REMINGTON®, RYOBI®, SHARK, SHINDAiWA®, STEINMAX, STIGA® A318 5 5 OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. www.oregonchain.eu A - 64 B083 DOLMAR®, MAKITA® D009 ALPINA®, CASTOR®, HUSQVARNA®, PARTNER®, SHINDAIWA® /SDK/ ISEKI, SOLO® D010 PARTNER® OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. A - 65 www.oregonchain.eu D024 BLITZ, DYNAMAC, DELUXE, EFCO®, FOLUX, CAMPERA, IRCEM, JONSERED®, NAUTAC, OLEO-MAC®, RELEX, VAP T074 D025 OPEM, STIHL® D033 DOLMAR®, MAKITA®, POULAN® OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. www.oregonchain.eu A - 66 D176 ALKO, BERNARD, DYNAMAK, ECHO®, POULAN®, TAS TANAKA®, ZENOAH® D196 ECHO®, HOMELITE® D276 MC CULLOCH®, STIGA® OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. A - 67 www.oregonchain.eu E031 BLITZ, HYDROCHIEF, OLEO-MAC®, STIHL® E099 ECHO®, HYDROCHIEF, STIHL® K153 DOLMAR® OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. www.oregonchain.eu A - 68 THIS BAR IS BEING OBS. F014 HOMELITE® M015 DRUSZBA OREGON® and POWERSHARP® are registered trademarks of Blount, Inc. All other marks are the property of their respective owners. A - 69 www.oregonchain.eu.

Copy Link

Recommended publications

Cordless Mowers Coming of Age?
JULY / AUG 2015 / AUG JULY CORDLESS MOWERS COMING OF AGE? v Hire For Profit v Training & Education FACE v Dealer 2020 Event v Billy Goat goes to B&S to v Business Monitor v New Products FACE KEITH CHRISTIAN v Credit Licences v Jim Green BAGMA DIRECTOR New Li-ion Cordless Lawnmowerswww.cobragarden.co.uk From Cobra Cobra are proud to be launching their new cordless range of Lithium-ion powered lawnmowers in 2015. The two new 40v cordless models are designed for instant starting with no petrol or oil required. These feature rich lawnmowers have cutting widths of 16” or 18”, include single lever height adjustment with cutting height ranging from 25mm - 75mm, battery power indicator built into the handles and the option of mulching or side discharge cutting systems. These lawnmowers and are ideal for medium to large gardens. Promotional prices start from just £289.99 including VAT For more information please visit: www.cobragarden.co.uk or call: 0115 986 6646 WELCOME CONTENTS 4 NEWS Roundup of recent industry news EDITOR’S 12 FACE TO FACE With BAGMA’s Keith Christian MESSAGEhis month, we feature an interview with BAGMA’s Keith Christian. The trade association has a long and proud 16 BUSINESS MONITOR history, and is now embedded within a much larger Latest dealer survey results and credit Tumbrella organisation along with half a dozen other licensing changes specialist trade associations. This provides BAGMA members with a range of benefits that would be unobtainable were it still an independent stand-alone 21 DEALER 2020 trade body. But against that, it appears to have lost its voice.
[Show full text]
2364. Equipment and Hand Tools
2364. Equipment and hand tools Sale Information Number of items : 102 Location : Aye (Belgium) Start date : 25 January 2021 as from 17:00 End date : 08 February 2021 as from 18:30 Viewing day : BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) Removal day : 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) WWW.AUCTELIA.COM The General Terms and Conditions and the Specific conditions of sale apply to this online Auction SPECIFIC CONDITIONS - 2364. Equipment and hand tools START DATE 25 January 2021 as from 17:00 END DATE 08 February 2021 as from 18:30 VIEWING BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) REMOVAL 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows on the removal day the proforma invoice and signs the delivery note. WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots. WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and transport costs will be charged. AUCTION FEES Auction Fees (based on Final Selling Price per Piece) - Amounts less than €15,000 17% of the final selling price - Amounts more than €15,000 12% of the final selling price VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees PAYMENT Within 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the bank account below and mention the invoice number: Auctelia ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB ORGANIZER AUCTELIA Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6 1435 Mont-Saint-Guibert (BE) SUPERVISION This online Auction sale is held under the supervision of court Bailiffs Etude Bordet, 4031 Angleur-Liège.
[Show full text]
Replacement Chainsaw Chain & Guide Bars
Replacement Chainsaw Chain & Guide Bars FIND PARTS FOR Stihl® Ryobi® McCulloch® Husqvarna® Black+ Makita® Poulan® Decker® Homelite® Echo® Craftsman® Jonsered® and others. For the most updated information, visit our online part finder at OregonProducts.com/Part-Finder Oregon® Chain Families Pitch Gauge File Size ÷2÷2 (in) (in) (in) += ANSI Kickback Ratings OregonProducts.com All cutting chains can kick back which may result in ™ R 90PX 3/8 .043 4.5 mm severe personal injury to the AdvanceCut Low Profile™ saw operator or bystander. Oregon's AdvanceCut is ideal for "DIY" Operate your chainsaw safely. homeowners because of its solid Read all warnings in your chainsaw operator manual. performance and reliable durability. S 91PX 3/8 .050 5/32 • Dependable • Advanced Low Profile™ Saw chain complies with D 72V 3/8 .050 7/32 low kickback performance requirements of ANSI P 73V 3/8 .058 7/32 B175.1-2012, paragraph 5.11.24 and with CSA Z62.3. ATTENTION: READ THIS. ™ H 20BPX .325 .050 3/16 WARNING: This saw chain met ControlCut the kickback performance Ideal for users looking for additional requirements of ANSI B175.1- 21BPX .325 .058 3/16 2012 when tested according to control, delivering a smooth cut J the provisions of ANSI B175.1- every single time. ControlCut is low 2012. Low kickback saw chain 22BPX .325 .063 3/16 meets the kickback performance maintenance, and it stays sharper so L requirements of CSA Standard Z62.3. you get jobs done quickly and easily. • Smooth • Controlled • Forgiving 2 Saw chain does not comply with low kickback ™ performance requirements.
[Show full text]
SCIN-017400 Starlock Product Finder EN.Indd 1 31.03.16 08:34 Starlock from Bosch – a Range As Versatile As Never Before
As versatile as your job The Starlock range Try the new blades – experience your Starlock moment SCIN-017400 Starlock Product Finder EN.indd 1 31.03.16 08:34 Starlock from Bosch – a range as versatile as never before 48 blades for the best results in sawing, routing, rasping, cutting, scraping, sanding and polishing The main advantages of Starlock from Bosch Japan tooth configuration made of BiM for clean cuts in hardwood Tapered base body Sturdy mount reduces jamming of reduces blade wobbling the base body to enable a controlled, precise cut Curved-Tec New Starlock mount Rounded cutting edge for Maximum power transfer precise, smooth plunge thanks to 3-dimensional cutting and less tooth quick-clamping system breakout on the sides (SDS) SCIN-017400 Starlock Product Finder EN.indd 2 31.03.16 08:34 Easy blade selection at the point of sale and in the toolbox thanks to unique color coding system Starlock accessory fits all existing multi-tools from Bosch and other brands Starlock ● –– Starlock Plus ● ● – Starlock Max ● ● ● Other Multi-Tool Bosch GOP / PMF with OIS, Fein MultiMaster, Fein ● Multitalent, Makita, Hitachi, –– Metabo, Milwaukee, AEG, Einhell, Ryobi, Skil, etc. ● compatible – not compatible Maximum power transfer No more mismatching and damaging of due to tight-fitting 3D connection of power tools thanks to the three performance machine and Starlock accessory classes Starlock, Starlock Plus, Starlock Max Accessory change within 3 seconds thanks to the new onehand snap-in system 1 2 3 4 SCIN-017400 Starlock Product Finder EN.indd 3 31.03.16 08:34 Long Lifetime: Bi-Metal technology meets the greatest demand in wood, plastic and metal 80 mm long blade Flat blade for deep cuts, a larger ampli- allows a controlled tude leads to more speed and precise cut BIM for long lifetime Slim design Rounded cutting edge reduces stress on the tool drive, for precise jolt-free and allowing operating at full speed and smooth plunge cutting allows perfect span removal AII 65 APB 65 × 40 mm, Curved-Tec, Long life Pack quantity 1 Part no.
[Show full text]
Press Release Stockholm, July 8, 2020
Press release Stockholm, July 8, 2020 Husqvarna Group to report better sales in the second quarter than previously anticipated Husqvarna Group has had a stronger Net Sales development for the second quarter of 2020 than advised in the press release published on June 8, 2020. Net Sales are now estimated to be SEK 13,500m (13,789), a decrease of around 2% versus prior year, or an increase of around 3% when adjusted for exited business. Operating income is estimated to be SEK 2,190m (2,125) for the second quarter. “We have delivered a very good quarter, even taking account of the COVID-19 situation, with sales growth when adjusting for Consumer Brands exits, and an increased operating margin. After a challenging start to the quarter, demand accelerated quickly as markets gradually reopened and consumers showed a high interest in lawn and garden care equipment, especially for watering products. The effects of temporary cost avoidance activities and a favorable product mix improved our operating margin.” commented Henric Andersson, CEO. All figures in this press release are preliminary and unaudited, and the final report for the second quarter of 2020 will be published on July 16, 2020 at about 07:30 CET. Husqvarna Group will not make any further comments until after the interim report has been published. For more information please contact: Johan Andersson, Director, Corporate Communications and Investor Relations, +46 702 100 451 or [email protected] This press release contains insider information that Husqvarna AB is required to disclose under the EU Market Abuse Regulation and the Securities Markets Act.
[Show full text]
Phoenix Monthly Auction Saturday, December 2Nd @ 8Am Vehicles & Equipment Preview Day: Friday, Dec
GENERAL INFORMATION PHOENIX MONTHLY AUCTION SATURDAY, DECEMBER 2ND @ 8am VEHICLES & EQUIpmENT PREVIEW DAY: FRIDAY, DEC. 1ST FROM 8am-5pm ONLINE ONLY FIREARms & SURPLUS BEGINS CLOSING 12/3 @ 5pm SAFETY IS OF UTMOST IMPORTANCE AT SIERRA AUCTION We ask that you cooperate with us by abiding by our safety rules: 1. If you see an unsafe condition, please notify a Sierra representative immediately. We have representatives stationed in each selling room as well as outside. 2. The front door entry and walkway from Room 1 to Room 2 need to be kept clear for safety reasons in the event of an emergency. Please help us by not standing in this high traffic area. 3. Sierra has been a family affair since we opened the business 30 years ago. However, due to safety concerns and large crowds, it has become necessary for us to initiate a policy of NO CHILDREN UNDER THE AGE OF 16. We hope you will cooperate and understand the need for this policy. 4. Service dogs are the only animals allowed on the property. This is for the safety and well being of our customers. 5. Sierra does not allow weapons (visible or concealed) on the premises per Arizona statues. 6. Please watch for moving auction vehicles and avoid standing in a position to block or impede moving vehicles. This will keep you safe and allow the auction to move rapidly. This will keep you safe and allow the auction to proceed in an orderly fashion. 7. Sierra will not release keys for vehicles that have been sold until we have determined that it is safe to do so.
[Show full text]
Einhell.Co.Uk
BRAND QUALITY + FULL AFTER SALES & PARTS SERVICE UK RANGE CATALOGUE 2016-17 GB: 0151 649 1500 IRL: 1890 946244 +44 (0)151 649 1501 Unit 9 Stadium Court, Plantation Road, Bromborough, Wirral, CH62 3QG [email protected] twitter.com/EinhellUK Mon-Thu: 8:45am-5:00pm Fri: 8:45am-3:15pm Visit us online at: einhell.co.uk einhellpowerxchange.co.uk Einhell UK Limited, reserves the right to alter products and / or specications without prior notice. E. & O. E. © 2016. Published by Einhell UK Limited. No part of this publication may be reproduced without prior permission from Einhell UK Limited. Art. No. 0001002016 / 5k / 02-16 NEW 2016 RANGE POWER TOOLS | STATIONARY | GARDEN TOOLS | ACCESSORIES POWER TOOLS STATIONARY EINHELL – QUALITY POWER X-CHANGE RED ELECTRIC INNOVATION & Twin packs 10-11 Mitre saws & E-stand 62-64 Lawnmowers 104-106 Drills & screwdrivers 12-14 Table saws 65-67 Tiller 107 VALUE FOR MONEY Rotary hammer 15 Tile cutter 68 Scarifier & aerator 107 Saws 16-18 Scroll saw 68 Grass trimmers 108 Einhell is one of the world’s Multi-sander 19 Bandsaw 68 Hedge trimmers 109 leading suppliers of hand-held Angle grinder 20 Wet & dry vacs 69-71 Pole-mounted tools 110 power tools, stationary and Radio 21 Chainsaw 111 Torch 21 Log splitter 112 garden tools. Accessories 22-23 GARDEN TOOLS Blower, shredder & vac 112 Garden shredders 113 Based in Landau/Isar in Germany, its in-house POWER X-CHANGE Water pumps 114-115 design team are committed to continual RED development, working tirelessly to develop Lawnmowers 76-77 Screwdriver 26 innovative, new products for the DIY Scarifier & aerator 78 MANUAL enthusiast and trade professional.
[Show full text]
Your Grass Will Be Greener
YOUR GRASS WILL BE GREENER Attend PLCAA's 3rd Annual Convention and Trade Show November 16-18, 1982 Indiana Convention • Exposition Center Indianapolis, Indiana Early Bird Registration/Reception Be present Monday evening, November 15, at the Early Bird Registration/Reception and theme party. Socialize with your peers, renewing old acquaintances and making new ones. Here is an opportunity to complete your registration, avoid those long lines on Tuesday morning and be on time for the opening. Convention Program In response to last year's attendees evaluations the program has been expanded to three days and will offer repeat workshops. Topics will include Motivation; Government Regula- tions; Management and Stress; Legal Issues; Client Relations and a special Panel Presentation on "Hot Issues." Keynoter Keynoting the convention this year will be Earl L. Butz, former U.S. Secretary of Agriculture, and Dean Emeritus of Agriculture, Purdue University, West Lafayette, Indiana. Dr. Butz will address the subject of the value of the small business entrepreneur in the American economic system under the title, "Populism, Politics, and Progress." Trade Show View the latest developments of products and services and have your questions answered by exhibitors in the attractive Conven- tion Exposition Center conveniently located to hotels and downtown. Exhibit hours have been extended into the afternoon of the final day to provide more visitation time by registrants. Many new exhibitors representing a wide diversity of product lines already are contracted
[Show full text]
Cerca Il Codice Della Barra Oregon (Che Trovi Nel Nostro Titolo) E Premi "Successivo" Sino a Quando Non Arrivi Alla Marca Della Tua Motosega
Con la funzione "Trova" cerca il codice della barra Oregon (che trovi nel nostro titolo) e premi "Successivo" sino a quando non arrivi alla marca della tua motosega. cm “ “ mm SL/MP/SP/GP SX/PXB/SFG/SFH RN AT SD/ML/DG AEG® KES35, 30 12 91 0.050 1,3 91VG/91VX/91P 6 45E 120SPEA041* 120SXEA041 120SDEA041* KS30, KS35, KS40 35 14 52E 140SPEA041* 140SXEA041 140SDEA041* 40 16 57E 160SPEA041* 160SXEA041 160SDEA041* KES36 33 13 .325 0.063 1,6 22BPX/LPX 7 56E 133SLBD025 38 15 62E 153SLGD025 153SFGD025 153RNBD025 40 16 67E 163SLGD025 163SFGD025 163RNBD025 163ATMD025 45 18 74E 183SLGD025 183SFGD025 183RNBD025 183ATMD025 50 20 81E 203SLGD025 203ATMD025 33 13 3/8 0.063 1,6 75LGX/LPX/D/DP 7 52E 38 15 56E 153SLHD025 153SFHD025 153RNDD025 40 16 60E 163SLHD025 163SFHD025 163RNDD025 163ATMD025 45 18 66E 183SLHD025 183SFHD025 183RNDD025 183ATMD025 50 20 72E 203SLHD025 203SFHD025 203RNDD025 203ATMD025 ALKO E1200, 1400E, 1500E, 2000, 2300, 30 12 91 0.050 1,3 91VG/91VX/91P 7 45E 120SPEA041* 120SXEA041 120SDEA041* E125, 25A, KS, KSB, 35 14 52E 140SPEA041* 140SXEA041 140SDEA041* KE4000, KE3500 VARIO 40 16 57E 160SPEA041* 160SXEA041 160SDEA041* KB3500, KB4000, 30 12 91 0.050 1,3 91VG/91VX/91P 6 44E 120SDEA218* KB4500, BKS38-35 35 14 49E 140SPEA218* 140SDEA218* 35 14 50E 40 16 55E 160SPEA218* 160SDEA218* 140 30 12 .325 0.050 1,3 20BPX/LPX 7 55E 35 14 61E 240 35 14 .325 0.050 1,3 20BPX/LPX 7 57E KB5000 40 16 .325 0.050 1,3 20BPX/LPX 7 65E 160SLGZ095 40 16 66E 160SLGK095 160RNBK095 45 18 72E 180SLGK095 1074, P21, P26, P28 35 14 .325 0.058 1,5 21BPX/LPX 7 60E 40 16
[Show full text]
To Find out Which Plungebar Fits Your Router, Please See the Following List
To find out which PlungeBar fits your router, please see the following list. No. 717622 - 717625 page 1 Router PlungBar Notes AEG OFS 710 Type B (No. 717623) Replace handles Atlas Copco OFSE 1000 Type B (No. 717623) Replace handles Atlas Copco OFSE 2000 E Typ C/F (No. 717624) Axminster AW 635 R Type B (No. 717623) Axminster White 127 Type D (No. 717625) Black & Decker KW 800 EK / 780E Not supported Black & Decker KW 850 EK Type B (No. 717623) Black & Decker RP200 Not supported Bosch 1100 AE Not supported Bosch 1300 ACE Type D (No. 717625) Bosch 1611 EVS Type D (No. 717625) Bosch 1613 Type D (No. 717625) Bosch 1614 EVS Type D (No. 717625) Bosch 1615 Typ C/F (No. 717624) Bosch 1617 EVS Typ C/F (No. 717624) Bosch 1617 EVS Plunge Base Typ C/F (No. 717624) Bosch 1619 EVS Typ C/F (No. 717624) Bosch 1700 ACE Typ C/F (No. 717624) Bosch 2000 Typ C/F (No. 717624) Bosch 600 ACE Not supported Bosch 800 Type D (No. 717625) Bosch 900 ACE Type D (No. 717625) Bosch GOF 900 Type D (No. 717625) Bosch GOF 1250 (L)CE Not supported Bosch GOF 1300 ACE Type D (No. 717625) Bosch GOF 1600 ACE Typ C/F (No. 717624) Bosch POF 400 A Type B (No. 717623) Bosch POF 500 Not supported Bosch POF 800 Type D (No. 717625) Bosch POF 1100, 1300, 1400 Not supported Challenge Xtreme M5757 Type D (No. 717625) Charnwood P220 Type D (No. 717625) CMT 1850 W Type A CMT AW 127 R Type D (No.
[Show full text]
Section 26 Workshop, Power Tools, Fuel and Lubrication
Section 26 Workshop, Power Tools, Fuel and Lubrication Norbar Torque Wrenches Page 612 Sealant & Caulking Guns Page 620 Grease Filler Pumps Page 633 G.P Air Tools Page 612 General Maintenance Adblue Nozzles Page 634 & Workshop Tools Page 621 Air Tool Oil Page 612 Fuel Delivery Nozzles Page 635 Soldering Irons Pages 621 - 622 Total Power Tools Page 613 Fuel Meters Page 636 Torches, Work Lamps Einhell Power Tools Pages 613 - 614 & Lighting Pages 622 - 623 Driven Fuel & Water Transfer Pumps Page 637 Einhell Wet & Dry Vacuums Page 615 Jamec Tyre In ation Pages 623 - 624 Fuel Filters & Water Elements Page 637 V-TUF M Class JWL Tyre In ation Page 625 Dust Extraction Page 615 Hose Reels For Fuel Page 637 PCL Tyre In ation Pages 625 - 627 Chicago Pneumatic Oil Control Guns Pages 637 - 638 Air Tools Pages 616 - 617 JWL, Cleaning Soda & Sand Blasting Guns Page 628 Hand Operated PCL Air Tools Pages 618 - 619 Liquid Pumps Page 638 Grease Nipples Air Tool Hoses Page 619 & Adaptors Pages 629 - 631 Pneumatic Oil Pumps & Dispensers Page 639 Micro Inline Tool Filter, Spray Guns Page 631 Regulator, Lubricator Page 620 Drum Taps, Funnels Manual Grease Guns & Waste Oil Drainers Page 640 Staple & Nailing Guns Page 620 & Grease Pages 632 - 633 26 Workshop, Power Tools, Fuel and Lubrication Composite 3/8” Reversible Air Drill c/w Torque Wrenches G.P Air Tools Jacobs Type Chuck Norbar Part Number Description Price .3/8” Reversible Drill (Jacobs Type FS9950 51.05 Norbar Professional Torque Wrenches Composite 3/8” Twin Hammer Impact Chuck) Wrench ● Full Range Shown
[Show full text]
U.S.SAWS G2 Dust Shroud U.S.SAWS’ 7” Generation 2 Shroud Is Made with Dual Density, High Wear, Non-Marking Polyurethane
U.S.SAWS G2 Dust Shroud U.S.SAWS’ 7” Generation 2 shroud is made with dual density, high wear, non-marking polyurethane. They are manufactured with a steel wear stiffening band molded into the perimeter of the shroud for extra-long life and durability. With the U.S.SAWS shroud, the concrete dust is extracted so that the operator may work without exposure to harmful dust. The convertible shroud allows the operator to grind against a vertical surface. A support flange enables the shroud to flex and keep a tight seal over uneven surfaces while preventing the cup wheel from making contact with the shroud. 7” Convertible Pro G2 Dust Shroud: PN: SX60115-G2 • Polyurethane construction is wear resistant & creates a seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue. • Flip up front edge allows the operator to grind directly up against a wall. This Dust Shroud is designed to fit 7” and 9” Metabo grinders including but not limited to W24-230, W24-180. 7” Convertible Hub G2 Dust Shroud: PN: SX65807M • Simple mounting system that is easy to use. • Wear resistant and creates a good seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue. This Dust Shroud is designed to fit 7” and 9” Metabo grinders including but not limited to W24-230, W24-180, W2000. 7” Universal G2 Dust Shroud: PN: SX65807U • Universal mounting system fits a variety of popular grinders: Metabo, Makita, Dewalt, Bosch and more. • Built with a T-Bolt mounting clamp allowing for non-slip or fall off.
[Show full text]