DOCSLIB.ORG

Oem Ref Cross List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Oem Ref Cross List OEM Designation GT P/N OEM P/N Supersede Drawing Toro Upper housing GT00415 130-2336 Toro Lower housing GT00416 130-2337 Toro Spring GT02130 130-2321 Toro indexing lever GT11011 130-2332 Toro SHAFT-OUTPUT, GT120035 133-2611 SHORT Toro SHAFT-OUTPUT, GT120036 133-2612 LONG Toro Short output shaft GT12839 130-2308 Toro long output shaft GT12840 130-2309 Briggs & StrattonPulley HR180 GT15059 7100763 Toro MG502 Input shaft GT15756 130-2300 Toro Input seal GT30203 130-2324 Toro Seal GT30204 130-2325 Toro Speed ring GT30219 130-2329 Toro Gear hub GT30701 130-2330 Toro HUB-GEAR, GT30704 133-2613 OUTPUT Toro SPACER-LONG GT31017 133-2617 Toro SPACER-SHORT GT31018 133-2618 Toro Speed spindle GT31511 130-2328 Toro KEY GT31512 133-2614 Toro Dog clutch GT32072 130-2335 Toro Dog clutch GT32073 130-2334 Toro Speed fork GT33228 130-2327 Toro Bushing GT34553 130-2333 Toro Lever GT34922 130-2331 Toro Gear Z14 GT35124 130-2314 Toro Gear Z15 GT35125 130-2313 Toro Gear Z17 GT35126 130-2312 Toro Gear Z32 GT35127 130-2317 Toro Gear Z25 GT35128 130-2316 Toro Gear Z22 GT35129 130-2315 Toro Bevel gear Z12 GT35130 130-2310 Toro Conic gear Z53 GT35147 130-2311 Husqvarna Cables kit 08-1 GT36030 John Deere Brake spring GT36043 MIU13945 Toro Spring GT36077 130-2323 Toro Spring GT36082 130-2322 Toro SPRING GT36098 133-2615 Husqvarna Belt GT37401 587086101 John Deere Belt RT400 GT37419 AUC13704 GT79267 - MIA12479 Husqvarna Control cam RS800F GT38011 587086301 Husqvarna Control cam RS800P GT38012 587086302 Husqvarna Belt Keeper RS800 GT38112 588508301 Husqvarna Primary variator bell GT38202 08-1 Husqvarna Secondary variator bell GT38203 OEM Designation GT P/N OEM P/N Supersede Drawing 08-1 Husqvarna SD-P cover GT38800 587291601 Husqvarna SD-F cover GT38801 588732301 Husqvarna CRD cover GT38802 John Deere RT400 cover GT38808 MIU14383 Husqvarna Debris shield GT38811 590097701 Husqvarna Seal 23/40/10 GT41816 Husqvarna Output shaft Seal GT41857 587086041 John Deere Screw 5x16 GT43621 MIU14381 Husqvarna Variation kit 08-1 GT79045 Husqvarna Bypass kit 08-1 GT79046 Husqvarna Driven kit 08-1 GT79075 Husqvarna Driver kit 08-1 GT79083 Husqvarna Controls kit 08-1 GT79097 Briggs & StrattonHR300P Pulley GT79135 1739624 Husqvarna Friction Pack GT79136 587290901 Husqvarna Inversion security GT79186 587291101 system John Deere Driven Kit RT400 GT79244 MIA12482 John Deere Shift cam RT400 GT79246 MIA12475 John Deere Brake kit RT400 GT79247 MIA12474 Husqvarna Driven Tools GT79252 587086501 Husqvarna Driven kit GT79253 58708601 Husqvarna Brake kit RS800 GT79255 587291301 Husqvarna Controls kit RS800P GT79256 592801001 Husqvarna Bypass kit RS800 GT79257 587291401 Husqvarna Inversion kit RS800 GT79258 587291402 John Deere Inversion control GT79263 MIA12790 RT400 John Deere Compressor limitor GT79264 MIA12480 John Deere Hardware RT400 GT79265 MIA12477 Husqvarna Hardware RS800 GT79323 587086901 Husqvarna Control kit fender GT79326 587086902 Briggs & StrattonControl kit HR300 GT79331 John Deere Variation kit RT400 GT79362 AUC16068A MIA12755 Toro MV502 Pulley kit GT79363 130-2366 John Deere Driver kit RT400 GT79398 MIA13031 Toro HF200 Pulley kit GT79400 131-5973 GGP Planetary:Satellite for GT79422 Diff GT82003 Husqvarna Anti-debris kit GT79452 589668301 Husqvarna Variation kit RS800 GT79453 590097101 Husqvarna Variation kit RS800 GT79454 590097201 Briggs & StrattonInversion kit HR300 GT79472 Crary BV3 GT81007 128342 Stiga Rider GT81017 18400972 GGP BV3 GT81028 81003080-0 Tielburger BV3 + Reverse GT81036 AZ-016-022 A OEM Designation GT P/N OEM P/N Supersede Drawing Honda BV3 GT81046 20001-VE1-T02 Honda BV3 GT81047 20001-VF0-E52 2-M1 Honda BV3 GT81048 20001-VG4-H02 Honda BV3 GT81049 20001-VG7-H03 1-M1 Billy Goat BV3 GT81070 840085 Toro MG502 GT81103 131-5350 GT81102 - 131-0859 GT81093 - 125-1090 Echo MG512 GT81111 33932/00 GT81091 - 31781/00 Tielburger MG510 GT81117 AZ-016-037 Stiga Diff. rider GT82003 21482149 Differential 16 GT82005 GGP Brake for Diff GT82006 GT82003 Ariens Diff intuitive GT82015 4584100 Toro Diff intuitive GT82015 130-9776 DI500 GT82018 MTD ML300 GT84001 618-06036 Megagroup MC300 GT84006 080110500 Husqvarna MD300 GT84007 09173720 D Hayter MC300 GT84059 411002 C Viking MC300 GT84085 6336-640-0101- OEM Designation GT P/N OEM P/N Supersede Drawing A Emak MC300 GT84090 66070017-D GGP MC300 GT84094 81003076-1 GGP MC300 GT84095 181003077/1 GGP MC300 GT84096 81003078-0 GGP MC300 GT84097 81003079-1 Granja MC300 GT84100 90803131C Tielburger MC500 GT84106 AZ-016-021 C Honda 496 US GT84114 20001-VG3-D02 5-M1 Honda 496 US GT84115 20001-VG4-B51 5-M1 Honda MC300 GT84117 20001-VG8-802 Honda MC300 GT84119 20001-VH3-852 2-M1 Honda MC300 GT84120 20001-VH4-852 2-M1 Stiga MC300 GT84170 181003067-0 Honda MC300 GT84196 20001-VEO-851 0-M1 Husqvarna MD300 GT84209 188296 Viking MC300 GT84213 6360-640-0100- A Viking MC300 GT84214 6360-640-0112- A Honda MC500 GT84261 20001-VK7-752 3-M1 Honda MC500 GT84262 20001-VK8-753 2-M1 Husqvarna MD300 GT84263 191636 GGP MC300 GT84265 81003091-0 GGP MC300 GT84267 81003085-0 GT84000 - 1111-3046-01 Husqvarna MD300 GT84271 5312131-87 OEM Designation GT P/N OEM P/N Supersede Drawing MTD MD300 GT84274 618-04231 Masport MC300 GT84276 583487 Honda MC500 GT84280 2000A- VK8-A502-M1 Viking MC300 GT84285 6340-640-0113- 6340-640-0112- A A Honda MC300 GT84286 2000A- VG8-8501-M1 GGP MD300 GT84287 81003093-1 GGP MD300 GT84288 81003092 Briggs & Stratton MD300 GT84289 710023 Viking MD300 GT84292 6357-640-0101- A Wolf MD300 GT84296 1082001-A GT84016 - 1082000 GGP MD300 GT84299 81003095-0 Husqvarna ML300 GT84301 199231 GGP MC300 GT84303 81003096-3 Husqvarna MA300 GT84307 404833 Pubert MC500 GT84310 0306040012-A Husqvarna MA300 GT84312 404834 MC300 GT84316 Briggs & Stratton MA300 GT84318 7100857 Emak MC500 GT84328 66060360D Toro MA302 GT84329 110-7042 Briggs & Stratton MA302 GT84345 880341 Briggs & Stratton MD300 GT84352 7101206 Billy Goat MA502 GT84363 891020 OEM Designation GT P/N OEM P/N Supersede Drawing Briggs & Stratton MA302 GT84369 880379 Toro MA300 GT84372 115-1992 Husqvarna MA302 GT84381 504541402 Briggs & Stratton MA302 GT84382 880604 Husqvarna MD300 GT84385 415225 (199205) Husqvarna MD300 GT84386 415226 (199206) Outil Wolf MC500 GT84388 36310 Toro MA502 GT84391 114-2819 Husqvarna MA302 GT84399 544343203 Masport MC500 GT84406 573092 Stihl MC300V GT84413 6340-640-0122- A Husqvarna MA300 GT84420 420397 Husqvarna MA402 GT84422 419211 GT84314 - 408029 Husqvarna MA402 GT84423 419213 GT84311 - 404839 Husqvarna MA402 GT84424 419214 GT84306 - 404844 Ibea MD300 GT84436 P2090082 Al-Ko MC300 GT84440 470142-B Husqvarna MA302 GT84446 504541403 GGP MD300 GT84457 181003102/1 Wolf MC300 GT84465 1097065 Briggs & Stratton MA300 GT84468 7103311 Briggs & Stratton MD300 GT84470 7103313 Viking MC300 GT84487 6360-640-0101- OEM Designation GT P/N OEM P/N Supersede Drawing B Briggs & Stratton MA302 GT84495 884062 Black&Decker MA302 GT84500 90134358 GGP MC300 GT84503 181003106/1 TTI MD300 GT84508 31102250 Sabo MC500 GT84519 SAU11964 Husqvarna MA402 GT84520 432738 GT84477 - 430787 GT84435 - 420398 DR Power MV502 GT84522 283211 Viking MS300 GT84524 6338-640-0100- A-5 Black&Decker MA302 GT84525 90559309 TTI MS300 GT84526 31103473 Husqvarna MA302 GT84531 581680801 MS300 GT84541 MS300 GT84551 TTI MS300 GT84558 31105469 MS300 GT84560 SErci MC500 GT84566 207111 Honda MA302 GT84568 577117401 Viking MS300 GT84569 6350-640-0100- B-6 Emak MS300 GT84573 66070660 GGP MD300 GT84574 81003108-0 OEM Designation GT P/N OEM P/N Supersede Drawing Honda MC500 GT84575 20001-VH3-853 2-M1 Honda MC500 GT84576 20001-VH4-853 2-M1 Hayter MS300 GT84578 111-5981 MS300 GT84588 Toro ML300 GT84657 121-2331 GT84425 - 115-4560 Snapper MA302 GT84661 7105336 GT84320 - 7100858 Briggs & Stratton MA302 GT84662 7105337 GT84350 - 7101245 Briggs & Stratton MA302 GT84663 7105127 GT84469 - 7103312 MS300 GT84671 MS300 GT84672 MS300 GT84712 Ariens MA302 GT84720 4509200 GGP MD300 GT84723 181003110/0 Toro MA302 GT84725 121-9178 GT84411 - 115-4652 Toro MA302 GT84728 121-9181 GT84658 - 121-2332 GT84454 - 112-8831 Toro MA302 GT84730 121-9183 GT84308 - 110-9479 Toro ML300 GT84731 121-9184 Toro MA302 GT84732 121-9185 GT84506 - 117-4086 Toro MA402 GT84733 121-9186 GT84729 - 121-9182 OEM Designation GT P/N OEM P/N Supersede Drawing GT84305 - 110-9414 Toro MA502 GT84737 125-1020 MS300 GT84740 MS300 GT84745 MS300 GT84746 MS300 GT84752 Oléomac MC300V GT84753 66070679A Masport MS300 GT84755 567357 MS300 GT84766 Swisher MC600 GT84772 19020 Toro MA502 GT84781 116-9906 GT84459 - 109-9290 Einhell MD310 GT84794 10016505 LM46Z-B MD310 GT84797 MD310 GT84801 MD310 GT84802 Lonvi MD310 GT84806 JL50Z/46Z Warrior MD310 GT84807 65170A MD310 GT84812 MD310 GT84814 Daye MD310 GT84822 2102300058B Daye MD310 GT84823 2102300063B Toro MA302 GT84824 127-6836 GT84799 - 127-0727 Hayter MC500 GT84857 111-7934 OEM Designation GT P/N OEM P/N Supersede Drawing MD310 GT84864 Toro MA302 GT84879 130-6734 Einhell MD310 GT84891 10019167 LM51Z-E Toro MA300 GT84894 130-0845 GGP MC300 GT84898 181003115/0 Daye MD310 GT84899 2102300081A Daye MD310 GT84900 2102300082A Husqvarna MA302 GT84901 586137601 Sthil MS300V GT84902 6358-640-0100- A GGP MC300 GT84909 181003114/0 Toro MA302 GT84915 131-0881 Einhell MD310 GT84943 10019422 LM46Z-E GGP MC300 GT84955 181003127/0 GGP MC300 GT84956 181003126/0 Stihl MC300V GT84962 6364-640-0100- B Stihl MC600V GT84966 6374-640-0120- B Toro MV502 GT84969 131-9664 Toro MV502 GT84970 131-9666 AlKo MC300 GT84971 441361 Alko MC300 GT84972 441419 Toro MV502 GT84973 131-9662 Daye MS300 GT84975 DY212-190SM-0 1 OEM Designation GT P/N OEM P/N Supersede Drawing
Load more

Recommended publications
  • Cordless Mowers Coming of Age?
    JULY / AUG 2015 / AUG JULY CORDLESS MOWERS COMING OF AGE? v Hire For Profit v Training & Education FACE v Dealer 2020 Event v Billy Goat goes to B&S to v Business Monitor v New Products FACE KEITH CHRISTIAN v Credit Licences v Jim Green BAGMA DIRECTOR New Li-ion Cordless Lawnmowerswww.cobragarden.co.uk From Cobra Cobra are proud to be launching their new cordless range of Lithium-ion powered lawnmowers in 2015. The two new 40v cordless models are designed for instant starting with no petrol or oil required. These feature rich lawnmowers have cutting widths of 16” or 18”, include single lever height adjustment with cutting height ranging from 25mm - 75mm, battery power indicator built into the handles and the option of mulching or side discharge cutting systems. These lawnmowers and are ideal for medium to large gardens. Promotional prices start from just £289.99 including VAT For more information please visit: www.cobragarden.co.uk or call: 0115 986 6646 WELCOME CONTENTS 4 NEWS Roundup of recent industry news EDITOR’S 12 FACE TO FACE With BAGMA’s Keith Christian MESSAGEhis month, we feature an interview with BAGMA’s Keith Christian. The trade association has a long and proud 16 BUSINESS MONITOR history, and is now embedded within a much larger Latest dealer survey results and credit Tumbrella organisation along with half a dozen other licensing changes specialist trade associations. This provides BAGMA members with a range of benefits that would be unobtainable were it still an independent stand-alone 21 DEALER 2020 trade body. But against that, it appears to have lost its voice.
    [Show full text]
  • 2364. Equipment and Hand Tools
    2364. Equipment and hand tools Sale Information Number of items : 102 Location : Aye (Belgium) Start date : 25 January 2021 as from 17:00 End date : 08 February 2021 as from 18:30 Viewing day : BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) Removal day : 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) WWW.AUCTELIA.COM The General Terms and Conditions and the Specific conditions of sale apply to this online Auction SPECIFIC CONDITIONS - 2364. Equipment and hand tools START DATE 25 January 2021 as from 17:00 END DATE 08 February 2021 as from 18:30 VIEWING BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) REMOVAL 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows on the removal day the proforma invoice and signs the delivery note. WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots. WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and transport costs will be charged. AUCTION FEES Auction Fees (based on Final Selling Price per Piece) - Amounts less than €15,000 17% of the final selling price - Amounts more than €15,000 12% of the final selling price VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees PAYMENT Within 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the bank account below and mention the invoice number: Auctelia ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB ORGANIZER AUCTELIA Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6 1435 Mont-Saint-Guibert (BE) SUPERVISION This online Auction sale is held under the supervision of court Bailiffs Etude Bordet, 4031 Angleur-Liège.
    [Show full text]
  • Phoenix Monthly Auction Saturday, December 2Nd @ 8Am Vehicles & Equipment Preview Day: Friday, Dec
    GENERAL INFORMATION PHOENIX MONTHLY AUCTION SATURDAY, DECEMBER 2ND @ 8am VEHICLES & EQUIpmENT PREVIEW DAY: FRIDAY, DEC. 1ST FROM 8am-5pm ONLINE ONLY FIREARms & SURPLUS BEGINS CLOSING 12/3 @ 5pm SAFETY IS OF UTMOST IMPORTANCE AT SIERRA AUCTION We ask that you cooperate with us by abiding by our safety rules: 1. If you see an unsafe condition, please notify a Sierra representative immediately. We have representatives stationed in each selling room as well as outside. 2. The front door entry and walkway from Room 1 to Room 2 need to be kept clear for safety reasons in the event of an emergency. Please help us by not standing in this high traffic area. 3. Sierra has been a family affair since we opened the business 30 years ago. However, due to safety concerns and large crowds, it has become necessary for us to initiate a policy of NO CHILDREN UNDER THE AGE OF 16. We hope you will cooperate and understand the need for this policy. 4. Service dogs are the only animals allowed on the property. This is for the safety and well being of our customers. 5. Sierra does not allow weapons (visible or concealed) on the premises per Arizona statues. 6. Please watch for moving auction vehicles and avoid standing in a position to block or impede moving vehicles. This will keep you safe and allow the auction to move rapidly. This will keep you safe and allow the auction to proceed in an orderly fashion. 7. Sierra will not release keys for vehicles that have been sold until we have determined that it is safe to do so.
    [Show full text]
  • Einhell.Co.Uk
    BRAND QUALITY + FULL AFTER SALES & PARTS SERVICE UK RANGE CATALOGUE 2016-17 GB: 0151 649 1500 IRL: 1890 946244 +44 (0)151 649 1501 Unit 9 Stadium Court, Plantation Road, Bromborough, Wirral, CH62 3QG [email protected] twitter.com/EinhellUK Mon-Thu: 8:45am-5:00pm Fri: 8:45am-3:15pm Visit us online at: einhell.co.uk einhellpowerxchange.co.uk Einhell UK Limited, reserves the right to alter products and / or specications without prior notice. E. & O. E. © 2016. Published by Einhell UK Limited. No part of this publication may be reproduced without prior permission from Einhell UK Limited. Art. No. 0001002016 / 5k / 02-16 NEW 2016 RANGE POWER TOOLS | STATIONARY | GARDEN TOOLS | ACCESSORIES POWER TOOLS STATIONARY EINHELL – QUALITY POWER X-CHANGE RED ELECTRIC INNOVATION & Twin packs 10-11 Mitre saws & E-stand 62-64 Lawnmowers 104-106 Drills & screwdrivers 12-14 Table saws 65-67 Tiller 107 VALUE FOR MONEY Rotary hammer 15 Tile cutter 68 Scarifier & aerator 107 Saws 16-18 Scroll saw 68 Grass trimmers 108 Einhell is one of the world’s Multi-sander 19 Bandsaw 68 Hedge trimmers 109 leading suppliers of hand-held Angle grinder 20 Wet & dry vacs 69-71 Pole-mounted tools 110 power tools, stationary and Radio 21 Chainsaw 111 Torch 21 Log splitter 112 garden tools. Accessories 22-23 GARDEN TOOLS Blower, shredder & vac 112 Garden shredders 113 Based in Landau/Isar in Germany, its in-house POWER X-CHANGE Water pumps 114-115 design team are committed to continual RED development, working tirelessly to develop Lawnmowers 76-77 Screwdriver 26 innovative, new products for the DIY Scarifier & aerator 78 MANUAL enthusiast and trade professional.
    [Show full text]
  • Section 26 Workshop, Power Tools, Fuel and Lubrication
    Section 26 Workshop, Power Tools, Fuel and Lubrication Norbar Torque Wrenches Page 612 Sealant & Caulking Guns Page 620 Grease Filler Pumps Page 633 G.P Air Tools Page 612 General Maintenance Adblue Nozzles Page 634 & Workshop Tools Page 621 Air Tool Oil Page 612 Fuel Delivery Nozzles Page 635 Soldering Irons Pages 621 - 622 Total Power Tools Page 613 Fuel Meters Page 636 Torches, Work Lamps Einhell Power Tools Pages 613 - 614 & Lighting Pages 622 - 623 Driven Fuel & Water Transfer Pumps Page 637 Einhell Wet & Dry Vacuums Page 615 Jamec Tyre In ation Pages 623 - 624 Fuel Filters & Water Elements Page 637 V-TUF M Class JWL Tyre In ation Page 625 Dust Extraction Page 615 Hose Reels For Fuel Page 637 PCL Tyre In ation Pages 625 - 627 Chicago Pneumatic Oil Control Guns Pages 637 - 638 Air Tools Pages 616 - 617 JWL, Cleaning Soda & Sand Blasting Guns Page 628 Hand Operated PCL Air Tools Pages 618 - 619 Liquid Pumps Page 638 Grease Nipples Air Tool Hoses Page 619 & Adaptors Pages 629 - 631 Pneumatic Oil Pumps & Dispensers Page 639 Micro Inline Tool Filter, Spray Guns Page 631 Regulator, Lubricator Page 620 Drum Taps, Funnels Manual Grease Guns & Waste Oil Drainers Page 640 Staple & Nailing Guns Page 620 & Grease Pages 632 - 633 26 Workshop, Power Tools, Fuel and Lubrication Composite 3/8” Reversible Air Drill c/w Torque Wrenches G.P Air Tools Jacobs Type Chuck Norbar Part Number Description Price .3/8” Reversible Drill (Jacobs Type FS9950 51.05 Norbar Professional Torque Wrenches Composite 3/8” Twin Hammer Impact Chuck) Wrench ● Full Range Shown
    [Show full text]
  • Game Stand Manual
    www.stigagames.com SE BRUKSANVISNING DK BRUGSANVISNING NO BRUKSANVISNING FI KÄYTTÖOHJE GB INSTRUCTION MANUAL DE GEBRAUCHSANWEISUNG CZ NÁVOD K POUŽITÍ RU инструкция пользователя GAME STAND ART. NO. 71-1938-01 SE VARNING DK ADVARSEL • VARNING! Innehåller smådelar, tänk på kvävningsrisken. • ADVARSEL! Indeholder smådele, der kan medføre • Endast avsedd att användas tillsammans med STIGA kvælningsrisiko. bordshockeyspel och STIGA bordsfotbollsspel. • Må kun anvendes sammen med STIGA Bordhockeyspil • Använd inte stativet till annat syfte än avsett og STIGA Fodboldspil. användningsområde. • Anvend ikke stativet til andre formål end det angivne. • Spar manualen vid eventuell reklamation. • Gem instruktionen med henblik på evt. reklamation. NO ADVARSEL FI VAROITUS • ADVARSEL! Inneholder smådeler. Mulig kvelningsfare. • VAROITUS! Sisältää pieniä osia, huomioi tukehtumisvaara. • Er kun ment brukt sammen med STIGA’s klassiske • Tarkoitettu ainoastaan käytettäväksi STIGA bordhockey- og fotballspill. jääkiekko- sekä jalkapallopöytäpelien kanssa. • Bruk ikke stativet til annet enn tiltenkt bruksområde. • Älä käytä telinettä muuhun kuin sille tarkoitettuun • Ta vare på manualen til en evnt. reklamasjon. käyttöön. • Säästä ohjeet mahdollisia valituksia varten. GB WARNING DE WARNUNG • WARNING! Contains small parts. Choking hazard. • ACHTUNG! Enthält kleine Teile. Erstickungsgefahr. • Only intended to be used for with STIGA Table Hockey • Soll nur für STIGA Tisch-Hockey Spiele und STIGA game and STIGA World Champs game. WM-Spiel verwendet werden. • Do not use the product for any purposes other than its • Benutzen Sie das Produkt nicht für andere Zwecke als intended use. der bestimmungsgemäße Gebrauch. • Keep the instruction in case of complaint. • Behalten Sie die Bedienungsanleitung im Falle einer Reklamation. CZ VAROVÁNÍ RU внимание • POZOR! Obsahuje malé části, které mohou být vdechnuty • ВНИМАНИЕ! Содержит мелкие детали.
    [Show full text]
  • Hvilken Maskine Har Brug for Hvilket Slibeblad?
    20 | Slibemidler | Oversigt Bosch-tilbehør Hvilken maskine har brug for hvilket slibeblad? Excenterslibere Type Ø mm Antal huller Type Ø mm Antal huller Type Ø mm Antal huller Bosch Felisatti Makita GEX 125A/AC 125 8 TP 521/(E)AS 150 6 BO 6040 150 8 GEX 125/150 AVE 125/150 8 TP 522/AS/CE 150 6 BO 5041K 125 8 GEX 150AC/ACE 150 6 RGF 150/600E 150 6 Metabo GEX 150 Turbo 150 6 Festo/Festool SXE 125 125 8 PEX 11A/AE 115 8 ES 125/E 125 8 SXE 425 125 8 PEX 12A/AE 125 8 ETS 125 EQ-Plus 125 17/9 SXE 425XL 150 6 PEX 15AE 150 6 ETS 125 EQ 125 17/9 SXE 450 DUO 150 6 PEX 115 115 8 ETS 125 Q-Plus 125 17/9 FSX 200 Intec 125 8 PEX 125A 125 8 ETS 125 Q 125 17/9 SXE 325 Intec 125 8 PEX 125AE 125 8 ES 150/3 EQ/-C 150 17/9 Milwaukee PEX 220A 125 8 ES 150/5 EQ/-C 150 17/9 PRS 125E 125 8 PEX 270A/AE 125 8 ET 2E 150 17/9 ROS 150E 150 6 PEX 300A/E 125 8 ETS 150/3 EQ 150 17/9 Peugeot PEX 400AE 125 8 RO 150 FEQ-Plus 150 17/9 PAE 115 115 8 PEX 420AE 150 6 RO 150 FEQ 150 17/9 PRX 150E 150 6 AEG ETS 150/3 EQ-C 150 17/9 Protool EX 400 125 8 ETS 150/3 EQ-Plus 150 17/9 ESP 150E 15 9 EX 450 125 8 ETS 150/5 EQ 150 17/9 Ryobi EX 450 (150) 150 16 ETS 150/5 EQ-C 150 17/9 ERO 2412VN 125 8 EXE 400 125 8 ETS 150/5 EQ-Plus 150 17/9 P410 125 8 EXE 450 150 8 RO 150E 150 17/9 RS 290 125 8 EXE 460 (125) 125 8 RO 150 E(-Plus) 150 17/9 Skil EXE 460 125/150 8 WTS 150/7E (-Plus) 150 17/9 7400 125 8 EXE 460 (150) 150 16 ET 2E/E-Plus 150 17/9 7402 125 8 ROS 150E 150 6 ES 125 (Plus) 125 8 7415 115 8 EX 150 E 150 6 Flex 7425 125 8 EX 125 ES 125 8 XS 712A 125 8 7430 125 8 Atlas Copco X/XS
    [Show full text]
  • Circular Saws 530 | Circular Saw Blades | Overview Bosch Accessories for Power Tools 09/10
    Circular saws 530 | Circular Saw Blades | Overview Bosch Accessories for Power Tools 09/10 531 The right circular saw blade for 537 Optiline Wood 548 Construct Wood every job 533 More bite thanks to the sharp 542 Speedline Wood 551 Construct Metal teeth from Bosch 535 The right circular saw blade for 545 Multi Material 554 Accessories for Circular Saws any saw The new circular saw blade range: Five outstanding lines for all conventional applications. Bosch has expanded its range of circu- lar saw blades for mitre saws, cordless handheld circular saws and construction site bench circular saws. Bosch now offers circular saw blades specially designed to cut metal. The circular saw blade range now perfectly meets the needs of specialist dealers and professional tradesmen. These fi ve product lines cover every applica- tion, from interior jobs to construction. Tried and tested Bosch quality and outstanding performance guarantees satisfi ed customers. The outstanding value for money increases the demand for Bosch blades and therefore the sales volume. Our colour coding system and clearly labelled packaging means you can fi nd the right blade more quickly and easily than ever before. Bosch Accessories for Power Tools 09/10 Circular Saw Blades | Overview | 531 The right circular saw blade for every job. A precise blade for producing a quality cut in all standard woodworking applications. A fast blade for cuts along and across all types of wood. The perfect blade for making powerful cuts with clean cutting edges in all different kinds of materials. The ideal blade for making coarse cuts through construction site timber.
    [Show full text]
  • Item Number Description Nomenclature Model/Part Number
    Dated: 29 May 2019 Item Model/Part Number Description Nomenclature Number Quantity Serial Number Unit of Issue NSN Unit Acq Cost VACUUM CLEANER GLS GLS 2 BF 585-3 Each 1 Ankara Motor Pool $175.00 BOSCH BMS VACUUM CLEANER 1 No serial number Each No model number available 2 Ankara Motor Pool available $200.00 TOOL BOX A/F MECHANIC BIG 1 No serial number Each No model number available 3 Ankara Motor Pool available $750.00 TOOL BOX A/F MECHANIC SMALL 1 No serial number Each No model number available 4 Ankara Motor Pool available $250.00 1.5 T TRANSMISSION JACK 1 No serial number Each No model number available available 5 Ankara Motor Pool $250.00 CHARGER 1 WPLN4121BR-0728- Each No model number available 6 Ankara Motor Pool 377673-7106MKL01 $100.00 CHARGER 1 WPLN4121BR-709- Each No model number available 377673-633MKD02 7 Ankara Motor Pool $100.00 CHARGER 1 WPLN4121BR-0708- Each No model number available 8 Ankara Motor Pool 377673-6332MKK02 $100.00 4 T HYDRAULIC JACK LINCOLN 1 K 657 P 03274 Each 9 Ankara Motor Pool $400.00 4 T AIR JACK 1 No serial number Each GRAY JACK available 10 Ankara Motor Pool $600.00 BLUE POINT 2 TON RED JACK 1 SS060564008 Each 11 Ankara Motor Pool $400.00 10 T HYDRAULIC JACK No model number available 1 491000289-6023 Each 12 Ankara Motor Pool $650.00 PORTABLE SNOW REMOVER SMART SHIELD BOSS 1 STB03165 Each 13 Ankara Motor Pool $1,500.00 14 Ankara Motor Pool BATTERY CHARGER DEMIR IZ 1 SN:BC4825 Each $500.00 BLACK & DECKER CHARGEABLE HAND DRILL No model number available 1 20021152 Each 15 Ankara Motor Pool $75.00 16 Ankara
    [Show full text]
  • Kwb Katalog 2008-09
    Circular Saw Blades Saw Chains Accessories for Chainsaws Circular Saw Blades Qualities EASY-CUT Multi-purpose Blade Type E -33 - tungsten carbide tipped DIN 8083 - from 24 to 54 teeth, ø 150 to 350 mm - high gloss polished surface, sandblasted teeth - hard-/ softwood, laminated sheets, plywood, wood with nails, plastic, metal, steel, aluminium, MDF, chipboard - clean cut - tooth set „0“, for circular saws and saw benches, cut-off- and mitre saws Fine Cut Blade Type P -66 - tungsten carbide tipped, DIN 8083 - from 36 to 64 teeth, ø 125 to 240 mm - high gloss polished surface, sandblasted teeth - hard-/ softwood, shuttering, laminated sheets, MDF, chipboard, veneer, hardboard, plywood - splinter free cut - positive rake teeth, for circular saws, saw benches and mitre saws Chipboard Type M -55 - tungsten carbide tipped DIN 8083 - from 18 to 60 teeth, standard tooth ø 125 to 400 mm - high gloss polished surface, sandblasted teeth - hard-/ softwood, plasterboard, hardboard, blockboard, MDF boards, laminates, plasterboard - quick straight cut - positive rake teeth, for circular saws, saw benches and mitre saws Construction Wood Blade Type K -44 - tungsten carbide tipped DIN 8083 - from 12 to 44 teeth, coarse tooth ø 102 to 700 mm - high gloss polished surface, sandblasted teeth - hard-/ softwood, solid wood, chipboard, plasterboard - quick coarse cut - positive rake teeth, for circular saws and saw benches 220 Circular Saw Blades Qualities Crosscut Blade Type B -11 - chrome vanadium DIN 5134 - fine tooth, alternate set, sharpened, 56-110 teeth, Ø 125 to 500 mm - up to Ø 240 mm dia. with black non-stick coating for reduced drag and longer blade life - from 250 - 700 mm with high gloss polished surface - softwood, for cuts across and along the grain, fine precise cut Firewood Blade Type C -22 - chrome vanadium and DIN 5134 - alternate set and sharpened coarse teeth, Ø 250 - 700 mm - highly polished surface - firewood positive rake, for circular saws, saw benches and mitre saws.
    [Show full text]
  • Einhell Buy EUR 86.00
    Einhell RESEARCH (CDAX, Retail) Value Indicators : EUR Share data : Description : Buy DCF: 86.37 Bloomberg: EIN3 GR Supplier of power tools and garden FCF-Value Potential 20e: 68.97 Reuters: EING_p equipment for private household use. EUR 86.00 (EUR 96.00) ISIN: DE0005654933 Market Snapshot : EUR m Shareholders : Risk Profile (WRe): 2019e Market cap: 180.0 Freefloat 100.0 % Beta: 1.3 Price EUR 47.70 No. of shares (m): 3.8 Thannhuber AG (Ordinary sh.) 91.0 % Price / Book: 0.8 x Upside 80.3 % EV: 180.4 Others (Ordinary shares) 9.0 % Equity Ratio: 55 % Freefloat MC: 180.0 Net Fin. Debt / EBITDA: 0.2 x Ø Trad. Vol. (30d) : 168.79 th Net Debt / EBITDA: 0.3 x 2019 numbers underpin strong position in cordless power tools Figures Q4/2019: Comment on Figures: FY End: 31.12. Q4 Q4 Q4 Einhell released preliminary key numbers for FY 2019. Further details in EUR m 19 19e 18 yoy 19 19e 18 yoy will be published in April. After a 12% turnover increase in Q4, Einhell’s FY 2019 sales were better Sales 142.7 138.0 127.7 12 % 605.7 601.0 577.9 5 % EBT 5.9 5.9 5.7 3 % 32.5 32.5 36.2 -10 % than assumed. Margin 4.1 % 4.3 % 4.5 % 5.4 % 5.4 % 6.3 % FY 2019 EBT was fully in line with our expectations and the Net income 4.9 4.0 4.5 9 % 24.3 23.4 26.0 -7 % management guidance (EBT margin of ca.
    [Show full text]
  • Power Tools 2015/2016
    POWER CHANGE The innovative lithium-ion rechargeable battery system from Einhell POWER TOOLS 2015/2016 WELL DONE. Einhell. Well done. Based in Landau an der Isar in southern Germany, Einhell Germany AG is one of the world‘s leading suppliers of in-house developed and distributed solutions for DIY enthusiasts and trade professionals for use in the home, garden and for leisure pur- poses. For 50 years and in more than 40 countries, Einhell has provided professional expertise in its partnerships with retailers for the supply of hand-held power tools, stationary tools and machines including garden equipment and water technology. With its tagline “Einhell® WELL DONE”, Einhell can increasingly claim to be blazing a trail in the development of innovative new products and technologies that impress customers with their outstanding value for money. As a company, Einhell focuses on generating sustainable international growth as well as reinforcing its position in the market by supplying „Brand Quality at the Best Price“. Einhell. Brand quality and service. German Designed Y Our new multi-stage quality assurance system covers everything without excep- tion: from audits of our production facilities around the world to our complete Quality service for the end user. Einhell Germany AG Y The Einhell RED Service covering the D/A/CH markets provides fast, all-round Einhell Germany AG expert assistance and comes with a 10-year parts availability guarantee. Quality Designed German 2 POWER TOOLS Power X-Change The innovative lithium-ion battery system 4 Cordless
    [Show full text]