U.S.SAWS G2 Dust Shroud U.S.SAWS’ 7” Generation 2 shroud is made with dual density, high wear, non-marking polyurethane. They are manufactured with a steel wear stiffening band molded into the perimeter of the shroud for extra-long life and durability. With the U.S.SAWS shroud, the concrete dust is extracted so that the operator may work without exposure to harmful dust. The convertible shroud allows the operator to grind against a vertical surface. A support flange enables the shroud to flex and keep a tight seal over uneven surfaces while preventing the cup wheel from making contact with the shroud.

7” Convertible Pro G2 Dust Shroud: PN: SX60115-G2 • Polyurethane construction is wear resistant & creates a seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue. • Flip up front edge allows the operator to grind directly up against a wall.

This Dust Shroud is designed to fit 7” and 9” grinders including but not limited to W24-230, W24-180.

7” Convertible Hub G2 Dust Shroud: PN: SX65807M • Simple mounting system that is easy to use. • Wear resistant and creates a good seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue.

This Dust Shroud is designed to fit 7” and 9” Metabo grinders including but not limited to W24-230, W24-180, W2000.

7” Universal G2 Dust Shroud: PN: SX65807U • Universal mounting system fits a variety of popular grinders: Metabo, , Dewalt, Bosch and more. • Built with a T-Bolt mounting clamp allowing for non-slip or fall off. • Designed with a convertible edge that flips up for edge grinding.

This dust shroud is designed to fit many popular brand 7” and 9” grinders such as De- walt, Makita, Bosch, Metabo, Milwaukee, , and more.

P: 877-817- 6687 F: 813-621-7125 Surface Prep Visit us at www.ussaws.com Division [email protected]