~ I v ,

THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.)

Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60 CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.) PAGE PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors' Appointment...... 2906 2954-2955 The National Council for Law Reporting Act- The Political Parties Act-Change of Party Officials...... 2955 Appointment...... 2906 County Government Notices ...... 2906-2907,2953 The Physical Planning Act-Completion of Pail Development Plans, etc ...... 2955-2956 The Land Registration Act-issue of Provisional

Certificates, etc ...... 2907-2915 Disposal of Uncollected Goods ...... 2956 The National Treasury-Statement of Actual Revenues and Lossof Policies ...... 2956-2962 Net Exchequer Issues as at 31st July, 2018 ...... 2915-2918 Change of Names ...... The Civil Aviation Act-Decisions of the Kenya Civil 2962-2963 Aviation Authority on Applications for Air Service Licences ...... 2918-2922 SUPPLEMENT Nos. 110,111,112 and 113 The Standards Act-Declaration of Kenya Standards ...... 2922-2952 Senate Bills, 2018 The Legal Education Act-Passing of Examinations and PAGE Pupilage...... 2952-2953 The County Statutory Instruments Bill, 2018...... 391 The Companies Act-Intended Dissolution, etc...... 2953-2954 The Petition to County Assemblies (Procedure) Bill, 2018 413 The Competition Act-Proposed Acquisitions...... 2954 The Treaty Making and Ratification (Amendment) Bill, 2018 421 The Records Disposal (Court) Rules-Intended Destniction of Court Records...... 2954 The Statutory Instruments (Amendment) Bill, 2018...... 427

[2905 2922 THE KENYA GAZE'rI'E 17th August, 2018

Name and Address of Type of Service appliedfor Decision Applicant Non-scheduled air services for passengers and cargo within/out of unto Kenya to/from points in AfricafMiddle EastlEurope and Asia usin, aircraft types C208, EMB 120, F50, F27, B737, CRJ200, Beechcraft King Air E90, D0228, G280,BE200,EMB190 and CL605 based at JKIA Wilson, Malindi, Moi, Eldoret and Kisumu airports. Jetwest Airlines Limited Non-scheduled air service for passengers and cargo within/out of/into Deferred. P. 0. Box 34538-00100 Kenya to/from points within Africa and Middle East Nairobi Domestic scheduled air service for passengers on the routes: JKIA/Wilson-Eldoret-JKIAIWilson JKIAIWilson-Mombasa-Lamu/JKIA/Wilson JKIA/Wilson-Wajir-JKIAfWilson JKIA/Wilson-Kisumu-JKIAJWilson JKIA/Wilson-Ukunda-Vipingo-JKlAfWilson JKIA/Wilson-Homa Bay-JKIAIWilson JKJA/Wilson-Mandera-JXJA/Wijson vii) JKIA/Wilson-Lodwar-JKIA/Wilson JKIA/Wilson-Lokichoggio-JKIA/Wilson (iv) JKIA/Wilson-Malindi-Lamu-JKIA/Wilson using aircraft types FK50 an DHC8 based at JKIA and Wilson airport. Phoenix Air Group Inc International non-scheduled air service for Passengers and cargo out Licence granted for one (1) yea 100 Phoenix Air Drive of/into Kenya to/from points in AfricalMiddle East/Europe; with effect from 23rd July, 2018. SW, Cartersville GA Emergency medical service out of/into Kenya to/from points in 30120 Africa/Middle East/Europe using aircraft type G1159A based at USA Cartersville, Georgia, USA and JKIA. Dated the 13th August, 2018. G.M.KIBE, PTG 000295/18-19 Director-General.

GAZErI'E NoTICE No.8455 KS ISO 20844:2015 Kenya Standard—Petroleum and related products—Determination of the shear THE STANDARDS ACT stability of polymer-containing oils using a (Cap. 496) diesel injector nozzle, First Edition

DECLARATION OF KENYA STANDARDS KS ISO 26422:2014 Kenya Standard—Petroleum and related products—Determination of shear stability PURSUANT to Section 9 (1) of the Standards Act, the National of lubricating oils containing polymers- Standards Council declares the specifications or codes of practice Method using a tapered roller bearing, First appearing in the schedule hereto to be Kenya Standards with effect Edition from the date of publication of this notice. KS ISO/TS Number Title of Specification or Code of Practice 15029-2:2012 Kenya Standard—Petroleum and related products—Determination of spray ignition Chemical characteristics of fire-resistant fluids Part 2: KS ISO 3679:2015 Kenya Standard—Determination of flash Spray test—Stabilized flame heat release no-flash and flash point—Rapid equilibrium method, First Edition closed cup method, First Edition KS ISO 18188:2016 Kenya Standard—Specification of KS ISO 4263-3:2015 Kenya Standard—Petroleum and related polypropylene drinking straws, First Edition products—Determination of the ageing behaviour of inhibited oils and fluids using KS 927:2016 Kenya Standard—Disinfecting general the TOST test Part 3: Anhydrous procedure purpose liquid synthetic detergents- for synthetic hydraulic fluids, First Edition Specification, Second Edition KS ISO 13032:2012 Kenya Standard—Petroleum products- KS 1942:2016 Kenya Standard—Bathing bars- Determination of low concentration of sulfur Specification, Second Edition in automotive fuels—Energy-dispersive X- KS 2231:2016 Kenya Standard—Antibacterial bathing ray fluorescence spectrometric method, First bars—Specification, Second Edition Edition KS 2639:2016 Kenya Standard—Copper sulphate- KS ISO 22854:2016 Kenya Standard—Liquid petroleum Specification, First Edition products - Determination of hydrocarbon types and oxygenates in automotive motor KS 2637:2016 Kenya Standard—Chlorine tablets- - gasoline and in ethanol (E85) automotive Specification, Fitst Edition fuel—Multidimensional gas KS 2638:2016 Kenya Standard - Stable bleaching powder chromatography method, first edition - Specification, First Edition KS ISO 12152:2012 Kenya Standard—Lubricants, industrial oils Food and Agriculture and related products—Determination of the foaming and air release properties of KS 1552:2016 Kenya Standard—Code of hygienic practice industrial gear oils using a spur gear test for production, handling, bulking, rig—Flender foam test procedure, First processing, marketi1g and distribution for Edition milk and milk products, Second Editinn

17th August, 2018 THE KENYA GAZETTE 2923

KS 2640:2016 Kenya Standard—Fruits and nectars- KS ISO 5518:2007 Kenya Standard - Fruits, vegetables and Specification, First Edition derived products - Determination of KS ISO 13559:2002 Kenya Standard - Butter, fermented milks Benzoic Acid Content - Spectrophotometric and fresh cheese - Enumeration of Method, First Edition contaminating microorganisms - Colony- KS ISO 5523:1981 Kenya Standard - Liquid fruit and count technique at 30 degrees C, First vegetable products - Determination of Edition sulphur dioxide content (routine method), KS ISO 11290-1:1996 Amd 1:2004 Kenya Standard - First Edition Microbiology of food and animal feeding stuffs - Horizontal method for the KS ISO 6557-2:1984 Kenya Standard - Fruits, vegetables and detection and enumeration of Listeria derived products - Determination of monocytogenes Part 1: Detection method, ascorbic acid content Part 2: Routine First Edition methods, First Edition KS 150 29842:2011 Amd.1:2015 Kenya Standard - KS ISO 6632:1981 Kenya Standard - Fruits, vegetables and Sensory analysis - Methodology - derived products - Determination of Balanced incomplete block designs, First volatile acidity, First Edition Edition KS ISO 6633:1984 Kenya Standard - Fruits, vegetables and KS 1095:2016 Kenya Standard - Food seasoning mixtures derived products - Determination of lead - Specification, Fifth Edition content - Flameless atomic absorption spectrometric method, First Edition KS ISO 13904:2016 Kenya Standard - Animal feeding stuffs - KS ISO 6636-2:1981 Kenya Standard - Fruits, vegetables and Determination of tryptophan content, First derived products - Determination of zinc Edition content Part 2: Atomic absorption KS 2356:2016 Kenya Standd - Rio-fertilizer - spectrometric method, First Edition Specification, Second Edition KS ISO 6637:1984 Kenya Standard - Fruits, vegetables and KS 1758-2:2016 Kenya Standard - Horticulture industry derived products - Determination of code of practice Part 2: Fruits and mercury content - Flameless atomic vegetables, First Edition absorption method, First Edition KS 2657:2016 Kenya Standard - Warehouse and KS ISO 750:1998 Kenya Standard - Fruit and vegetable warehousing for bagged storage of cereals products - Determination of titratable and pulses - Requirements, First Edition acidity, First Edition KS 1690:2016 Kenya Standard - Rock phosphate KS ISO 75 1:1998 Kenya Standard - Fruit and vegetable fertilizers - Specification, Second Edition products - Determination of water- insoluble solids, First Edition KS 2260:2016 Kenya Standard - Natural calcium phosphate for manufacture of fertilizer - KS ISO 762:2003 Kenya Standard - Fruit and vegetable Specification, Second Edition products - Determination of mineral Impurities content, First Edition KS 2261:2016 Kenya Standard - Single superphosphate (powder) fertilizer —Specification, Second KS ISO 763:2003 Kenya Standard - Fruit and vegetable Edition products - Determination of ash insoluble in hydrochloric acid, First Edition KS ISO 8157:2015 Kenya Standard - Fertilizers and soil conditioners - Vocabulary, Second Edition KS ISO 7952:1994 Kenya Standard - Fruits, vegetables and derived products - Determination of KS ISO 17318:2015 Kenya Standard - Fertilizers and soil copper Content - Method using flame conditioners - Determination of arsenic, atomic absorption spectrometry, First cadmium, chromium, lead and mercury Edition Contents, First Edition KS ISO 8454-16:1995 Kenya Standard - Methods of test for KS ISO 17319:2015 Kenya Standard - Fertilizers and soil tobacco and tobacco products Part 16: conditioners - Determination of water- Cigarettes - Determination of carbon soluble potassium content - Potassium monoxide in the vapour - Phase of tetraphenylborate gravimetric method, First cigarette smoke - NDIR method, First Editibn Edition KS ISO 17322:2015 Kenya Standard - Fertilizers and soil KS ISO 15152:2003 Kenya Standard - Tobacco - conditioners - Analytical methods for Determination of the content of total Sulfur Coated Urea (SCU),First Edition alkaloids as nicotine - Continuous-flow analysis method, First Edition KS ISO 17323:2015 Kenya Standard - Fertilizers and soil conditioners - Sulfur Coated Urea (SCU) KS ISO 15152:2003 Amd 1:2012 Kenya Standard - Tobacco - - General requirements, First Edition Determination of the content - of total alkaloids as nicotine - Continuous-flow KS ISO 1842: 1991 Kenya Standard - Fruits and vegetable analysis method AMENDMENT 1, First products - Determination of pH, First Edition Edition Electro technical KS ISO 2447:1998 Kenya Standard - Fruits and vegetable products - Determination of tin content, KS 2650:2016 Kenya Standard - Aerial bundled First Edition conductor systems - Specification, First Edition KS ISO 2448:1998 Kenya Standard - Fruit and vegetable products - Determination of ethanol KS 2611:2016 Kenya Standard - HDPE ducts - Main, content, First Edition mini & micro systems - Specification, First Edition KS ISO 874:1980 Kenya Standard - Fresh fruits and vegetables - Sampling, First Edition KS IEC 60666:2010 Kenya Standard - Detection and determination of specified additives in KS ISO 5517:1978 Kenya Standard - Fruits, vegetables and mineral insulating oils, Second Edition derived products - Determination of iron KS IEC 61039:2008 Kenya Standard - Classification of content -1 ,l0-phenanthroline photometric insulating liquids, Second Edition method, First Edition 2924 THE KENYA GAZETTE 17th August, 2018

KS IEC 61109:2008 Kenya Standard - Insulators for overhead KS IEC 61850-5:2013 Kenya Standard - Communication lines - Composite suspension and tension networks and systems for power utility insulators for ac. systems with a nominal automation Part 5: Communication voltage greater than 1 000 V - Definitions, requirements for functions and device test methods and acceptance criteria, Second models, First Edition Edition KS IEC 61850-6:2009 Kenya Standard - Communication KS IEC 60502-2:2014 Kenya Standard - Power cables with networks and systems for power utility extruded insulation and their accessories for automation Part 6: Configuration description rated voltages from 1 kV (U. = 12 kV) up language for communication in electrical to 30 kV (Urn = 36 kV) - Part 2: Cables for substations related to LEDs, First Edition rated voltages from 6 kV (U rn = 72 kV) up to 30 kV (Urn = 36 kV), Second Edition KS IEC 62056-1-0:2014 Kenya Standard - Electricity metering data exchange - The DLMSICOSEM suite Part KS IEC 60502-4:2010 Kenya Standard - Power cables with 1-0: Smart metering standardization extruded insulation and their accessories for framework, First Edition rated voltages from 1 kV (Urn = 12 kV) up to 30 kV (Urn = 36 kV) - Part 4: Test KS IEC 62056-4-7:2015 Kenya Standard - Electricity metering data requirements on accessories for cables with exchange - The DLMS/COSEM suite Part rated voltages from 6 kV (U rn = 7,2 kV) up 4-7: DLMS/COSEM transport ayer for IP to 30 kV (Urn = 36 kV), Second Edition networks, First Edition KS LEC 60228:2004 Kenya Standard - Conductors of insulated KS IEC 62056-5-3:2016 Kenya Standard - Electricity metering data cables, First Edition exchange - The DLMS/COSEM suite Part KS IEC 60811-203:2012 Kenya Standard - Electric and optical fibre 5-3: DLMS/COSEM application layer, First cables - Test methods for non-metallic Edition materials Part 203: General tests - KS IEC 62056-6-2:20 16 Kenya Standard - Electricity metering data Measurement of overall dimensions, First exchange - The DLMS/COSEM suite Part Edition 6-2: COSEM interface classes, First Edition KS IEC 60811-607:2012 Kenya Standard - Electric and optical fibre KS IEC 62052-31:2015 Kenya Standard - Electricity metering cables - Test methods for non-metallic equipment (AC) - General requirements, materials Part 607: Physical tests - Test for tests and test conditions Part 31: Product the assessment of carbon black dispersion in safety requirements and tests, First Edition polyethylene and polypropylene, First Edition KS IEC 62055-51:2007 Kenya Standard - Electricity metering - Payment systems Part 51: Standard transfer KS EAS 220:2001 Kenya Standard - Knitted polyester fabrics - Specification, First Edition specification (STS) - Physical layer protocol for one-way numeric and magnetic KS EAS 222:200 1 Kenya Standard - Knitted card token carriers, First Edition polyesterlcellulosic blended fabric - Specification, First Edition KS IEC 60947-4-1:2012 Kenya Standard - Low-voltage switchgear and controlgear Part 4-1: Contactors and KS EAS 227:2001 Kenya Standard - Knitted cotton fabric - motor-starters - Electromechanical Specification contactors and motor-starters, First Edition KS IEC 61439-3:2012 Kenya Standard - Low-voltage switchgear KS IEC 60947-4-2:2011 Kenya Standard - Low-voltage switchgear and control gear assemblies Part 3: and controlgear Part 4-2: Contactors and Distribution boards intended to be operated motor-starters - AC semiconductor motor by ordinary persons (DBO), Second Edition controllers and starters, Second Editin KS IEC 61439-4:2012 Kenya Standard - Low-voltage switchgear and control gear assemblies Part 4: KS IEC 60947-4-3:2014 Kenya Standard - Low-voltage switchgear Particular requirements for assemblies for and controlgear Part 4-3: Contactors and construction sites (ACS), Second Edition motor-starters - AC semiconductor ontrollers and contactors for non-motor KS IEC 61439-5:2014 Kenya Standard - Low-voltage switchgear loads, Second Edition and controlgear assemblies Part 5: Assemblies for power distribution in public KS ISO/IEC 27017:2015 Kenya Standard - Information technology networks, Second Edition - Security techniques - Code of practice for information security controls based on KS IEC 61439-6:2012 Kenya Standard -. Low-voltage switchgear ISO/IEC 27002 for cloud services, First and controlgear assemblies Part 6: Busbar trunking systems (busways), First Edition Edition KS IEC 61970-1:2005 Kenya Standard - Energy management KS ISO/IEC system application program interface (EMS- TR 27023:2015 Kenya Standard - Information technology API) Part t: Guidelines and general - Security techniques - Mapping the requirements, First Edition revised editions of ISOIIEC 27001 and ISO/IEC 27002, First Edition KS IEC TS 61970-2:2004 Kenya Standard - Energy management KS ISO/IEC system application program interface (EMS- TS30104:2015 Kenya Standard - Information Technology API) Part 2: Glossary, First Edition - Security Techniques - Physical Security Attacks, Mitigation Techniques and KS IEC/TS Security, First Edition 6 1850-2:2003 Kenya Standard - Communication networks and systems in substations Part 2: KS ISOIIEC 17825:2016 Kenya Standard - Information teëhnology Glossary, First Edition - Security techniques - Testing methods for the mitigation of non-invasive attack KS IEC 61850-3:2013 Kenya Standard - Communication networks and systems for power utility classes against cryptographic modules, First automation Part 3: General requirements, Edition First Edition KS ISO/IEC KS IEC 61850-4:2011 Kenya Standard - Communication 18014-4:2015 Kenya Standard - Information technology networks and systems for power utility - Security techniques - Time-stamping automation Part 4: System and project services Part 4: Traceability of time sources, management, First Edition First Edition 17th August, 2018 THE 1K.ENYA GAZETFE 2925

KS ISO/IEC KS ISO/IEC 24760-1:2011 Kenya Standard - Informatic in techn ology 30108-1:2015 Kenya Standard - Information technology - Security techniques - A f. ramewi irk for - Biometric Identity Assurance Services identity management Part 1: Termi nology Part 1: BIAS services, First Edition and concepts, First Edition KS ISO/fEC KS ISO/IEC TR 18268:20 13 Kenya Standard - Identification cards - 24760-2:2015 Kenya Standard - Informatioi i tec hnology Contactiess integrated circuit cards - - Security techniques - A fn sme work for Proximity cards - Multiple PICCs in a identity management Part 2: F :eference single PCD field, First Edition architecture and requirements, Fi rst Edition KS ISO/fEC KS ISO/TEC 18328-1:2015 Kenya Standard - Identification cards - 1: General 29190:2015 Kenya Standard - Information ti chno1ogy ICC-managed devices Part - Security techniques - Priv:ac capability framework, First Edition assessment model, First Editioa KS ISO/IEC KS ISOJIEC 18328-2:2015 Kenya Standard - Identification cards - devices Part 2: Physical 18033-5:2015 Kenya Standard - Information, technology ICC-managed characteristics and test methods for cards - Security techniques - incryption algorithms Part 5: Identity -b ised ciphers, with devices, First Edition First Edition KS ISO/IEC 18584:20 15 Kenya Standard - Information technology - - Conformance test KS ISO/IEC Identification cards requirements for on-card biometric Kenya Standard - Informs it ion technology TR 20004:2015 comparison applications, First Edition - Security techniques - J 'tefining software vulnerability analysis undc:i ISO/IEC 15408 KS ISO/IEC and ISO/TEC 18045, First JE dition TR 18781:2015 Kenya Standard - Identification cards - Laundry testing of ID cards, First Edition KS ISO/IEC 27006:2015 Kenya Standard - Inform ation technology - Security techniques - Requirements for KSISO/IEC bodies providing audit ani I certification of TR 19446:2015 Kenya Standard - Differences between the information security mam igement, Second driving licenses based on the ISO/fEC Edition 18013 series and the European Union specifications, First Edition KS ISO/IEC 27010:2015 Kenya Standard - Inforn lation technology - Security techniques - Information KS ISO/IEC security management for inter-sector and TR 30110:2015 Kenya Standard - Information technology inter-organizational communications, - Cross jurisdictional and societal aspects Second Edition of implementation of biometric technologies - Biometrics and children, First Edition KS ISOIIEC 27013:2015 Kenya Standard - Inforr nation technology - Security techniques - Guidance on the KSISO/IEC integrated implementatic in of ISO/IEC 29794-6:2015 Kenya Standard - Information technology 27001 and ISOIIEC 0000-1, Second - Biometric sample quality Part 6: Iris Edition image data, First Edition KS ISO/IEC KS ISO 13934-1:2013 Kenya Standard - Determination of 27033-1:2015 Kenya Standard - Inforr nation technology maximum force and elongation at maximum - Security techniques - Network security force using the strip method, First Edition Part 1: Overview and i oncepts, Second KS ISO 13934-2:2014 Kenya Standard - Determination of Edition maximum force using the grab method, First KS ISOIIEC Edition 11770-3:2015 Kenya Standard - Inforr nation technology KS ISO 13935-1:2014 Kenya Standard - Determination of - Security techniques - Key management maximum force to seam rupture using the Part 3: Mechanisms u sing asymmetric strip method, First Edition techniques, Second Editior I KS ISO 13935-2:2014 Kenya Standard - Determination of KS ISO/IEC maximum force to seam rupture using the 18033-1:2015 Kenya Standard - Infom iation technology grab method, First Edition - Security techniques - Encryption First Edition KS ISO/TR 24697:2011 Kenya Standard - Guidelines on the algorithms Part 1: General, determination of the precision of a standard KSISOIIEC test method by interlaboratory trials, First TR 29196:2015 Kenya Standard - Guida nec for biometric Edition enrolment, First Edition KS 2625:2016 Kenya Standard - Footballs - KS ISO/IEC Specification, First Edition TR 29194:2015 Kenya Standard - Inform sation technology KS 2636:2016 Kenya Standard. - Surgical masks - - Biometrics - Guid e on designing Specification, First Edition accessible and inclusive bi ometric systems, First Edition KS ISO 9073-14:2006 Kenya Standard - Test methods for non wovens Part 14: Cover stock wetback, First KS ISO/IEC Edition TR 29189:2015 Kenya Standard - Inforir, tation technology - Biometrics - Evalus A ion of examiner KS ISO 9073-15:2007 Kenya Standard - Test methods for non assisted biometric applicat i ns, First Edition wovens Part 15: Determination of air permeability, First Edition KS ISO/IEC TS 20027:2015 Kenya Standard - - Biometrics KS EAS 96:2008 Kenya Standard - Sanitary towels - interoperability profiles - Best practices for Specification, First Edition slap tenprint captures, F irst Edition Engineering KS ISO/IEC KS ISO 14946:2001 Kenya Standard - Small craft - Maximum TR29156:2015 Kenya Standard - Is sformsition technology load capacity, First Edition - Guidance for sj ,ecifyii ig performance - Inland requirements to mee t securi ty and usability KS ISO 6217:1982 Kenya Standard - Ship building - Pilot crafts - Identification, needs in appIicatiofl ; using biometrics, First navigation Edition painting and inscriptions, First Edition 2926 THE KENYA GATT'E 17th August, 2018 KS ISO 6216:1950 Kenya Standard - Ship building - Inland KS I-SO 14790:2003 Kenya Standard —Road vehicles - Heavy navigation - Pilot crafts - Classification commercial vehicles and buses - Lateral and basic requirements, First Edition transient response test methods KS ISO 3652:1975 Kenya Standard - Ship building - Inland KS 1734:201 6 Kenya Standard - Dividers for vessels - Rope reels, First Edition mathematical sets - Specification, Second Edition KS ISO 3969:1979 Kenya Standard - Ship building - Inland vessels - Operational documentation, First Services Edition KS 265 1:20 16 Kenya Standard - Tourism entities using high angle techniques - Specification, First KS 2647:2016 Kenya Standard - Gypsum plasterboard - Edition Specification, First Edition KS 2652:2016 Kenya Standard - Tourist Service vehicles KS 2641:2016 Kenya Standard - Standard test methods of - Code of practice, First Edition conducting strength test of panels for KS 2653:2016 Kenya Standard - Motor vehicle rental building construction, First Edition operations - Requments,First Edition KS 2644:2016 Kenya Standard - Structural and thermal KS 2654:2016 Kenya Standard - Tourist information insulated panels - Code of practice, First services - Non-graphical symbols used in Edition travel brochures, First Edition KS 2648:2016 Kenya Standard - Health, safety and KS ISO/TR 14468:2010 Kenya Standard - Selected illustrations of environmental guidelines for the attribute agreement analysis,First Edition construction and operation of timber KS ISO 3534-42014 Kenya Standard - Statistics - Vocabulai.y treatment. plants, First Edition and symbols Part 4: Survey sampling, First (IQ,I 130:l993 Kenya Standard - Road vehicles - Edition

Hydraulic jacks - Specifications, First KS ISO 16336:1 Z01 4 Kenya Standard - Applications of Edition, statistical and related methods to new KS,ISQ .13216-l:1999 Kya Standard - Road vehicles - technology and product development process - Robust -parameter design (RP'D), Anchorages in vehicles and attachments to First Edition anchorages for.child restraint systems Part 1: Seat bight anchorages and attachirnents, First KS ISO/TS 175( 13:2015 Kenya Standard -. Statistical methoda- of Edition uncertainty eyaluation - Guidance on evaluation of uncertainty using two-fac:tor KS ISO 13216-2:2004, Kenya Standard - Road vehicles - crossed designs First Edition Anchorages in vehicles and attachments to KS ISO 13528:2' 015 Kenya Standard - Statistical methods for anchorages for child restraint systems Part 2: use in proficiency testing by interlaboratozy Top tether anchorages and attachmtnsts, First comparison, First Edition Edition. KS ISO. 18404:21 915 Kenya Standard - Quantitative methods in KS.150 13216-3:2006 Kenya Standard - Road vehicles - process improvement - Six sigma -- Anchorages in vehicles and attachments to Competencies for key personnel and their anchorages for child restraint systems Part 3: organizations in relation to Six Sigma and Classification of child restraint dimensions Lean implementation, First Edition and space in vehicle, First Edition KS ISO 16355-1 2015- Kenya Standard - Application of statistical KS ISO ,13556: 1998 Kenya Standard —Road. vehi1es - and related methods to new technology and Localization of exhaust 1 system lea:s. and product. development process Part 1: equipmenspecifications, First Edition General principles and, perspectives, of Quality Function Deployment (QFD), First KS ISO 1440:2005 Ienya Standard —Road vehicles - Wheels Edition and rims - Use, general maintenance and KS ISOITR 1315 )5:2015 Kenya Standard - Selected iliustrations of safety requirements and out-of-service response surface method - Central conditions, First Edition composite design-, First Editioii ISJSO 4469-1 ;204 Ienya Standard: - Road vehicles. - KS ISO/IEC Compressed natural gas (CNG) refuelling 170214:2015. Kenya Standard - Conformity. assessment connector. Part. 1: 20 MPa (200 bar) - Requirements for bodies providing audit conocctor, First Edition and certification of management systems Part 1: Requirements, First Edition KS ISO i44692:2007.- Kenya Standard - Road' vehicles - qornprcssed nanlral gas (CNG) refuelling KSISO/IEC connect9r, Pit 2: 20 MPa (200 bar) TS17021-5:201. 4- Kenya Standard - Conformity assessment connector, size 2First Edttjon - Requirements for bodies providing audit and certification of management systems I

KS ISO/IEC KS 2645-3:2016 Kenya Standard - Special educational TS 17027:2014 Kenya Standard - Conformity assessment needs - Tool-kit Part 3: Resolution of - Vocabulary related to competence of disagreements, First Edition persons used for certification of persons, First Edition KS 2645-10:2016 Kenya Standard - Special educational needs - Tool-kit Part 10: Transitional KS ISO/IEC planning, First Edition TR 17026:2015 Kenya Standard - Conformity assessment KS 22 17-6:2016 - Example of a certification scheme for Kenya Standard - Glossary of terms used tangible products, First Edition in the education sector Part 6: University education, Second Edition KS ISO 9186-1:2014 Kenya Standard - Graphical symbols KS 2642:2016 Test methods Part 1: Method for testing Kenya Standard - Electronic Pharmacy comprehensibility, First Edition Information Systems, First Edition KS 2656:2016 Kenya Standard - KS ISO 9186-2:2008 Kenya Standard - Graphical symbols Electronic Laboratory - Information Systems, First Edition Test methods Part 2: Method for testing perceptual quality, First Edition Trade Affairs KS ISO 9186-3:2014 Kenya Standard - Graphical symbols - KS ISO 16212:2008 Kenya Standard - Cosmetics - Test methods Part 3: Method for testing Microbiology - Enumeration of yeast and referent association, First Edition mould, First Edition KS ISO 3864-2:2004 Kenya Standard - Graphical symbols - KS ISO 18415:2007 Kenya Standard - Cosmetics - Safety colours and safety signs Part 2: Microbiology - Detection of specified and Design principles for product safety labels, non-specified microorganisms, First Edition First Edition KS ISO 18416:2015 Kenya Standard - Cosmetics - KS ISO 23601:2009 Kenya Standard - Graphical symbols - Microbiology - Detection of Candida Safety identification - Escape and albicans, First Edition evacuation plan signs, First Edition KS ISO 21149:2006 Kenya Standard - Cosmetics - KS ISO 7000:2014 Kenya Standard - Graphical symbols for Microbiology - Enumeration and detection use on equipment - Index and synopsis, of aerobic mesophilic bacteria, First Edition First Edition KSISO2115O:2015 Kenya Standard - Cosmetics - KS ISO 7010:2011 Kenya Standard - Graphical symbols - Microbiology - Detection of Escherichia Safety colours and safety signs - Safety coli, First Edition signs used in workplaces and public areas, KS ISO 22717:2015 Kenya Standard - Cosmetics - First Edition - Microbiology - Detection of Pseudomonas KS ISO 17842-1:2015 Kenya Standard - Safety of amusement aeruginosa, First Edition rides and amusement devices Part I: Design KS ISO 22718:2015 Kenya Standard - Cosmetics - and manufacture, First Edition Microbiology - Detection of KS ISO 17842-2:2015 Kenya Standard - Safety of amusement Staphylococcus aureus, First Edition rides and amusement devices Part 2: The following standards are hereby confirmed: Operation and use, First Edition Chemical KS ISO 17842-3:2015 Kenya Standard - Safety of amusement KS 1578-1:2010 rides and Metal polishes - Specification Part 1: amusement devices Part 3: Ordinary liquid metal polishes Requirements for inspection during design, manufacture, operation and use, First KS 1578-2:1999 Specification for metal polishes Part 2: Edition Special metal polishes KSIS028560-1:20l4 Kenya Standard - Information and KS 1581-1:2001 Specification for thermoplastic dustbins and documentation - RFID in libraries -Part I: lids Part 1: Thermoplastic dustbins Data elements and general guidelines for KS 1581-2:2001 Specification for thermoplastic dustbins and implementation, First Edition lids Part 2: Plastic and rubber dustbin lids. KS ISO 28560-2:2014 Kenya Standard - Information and KS 1582-1:2000 Method of test for plastics Part 1: documentation - RFID in libraries Part 2: Determination of carbon-black content in Encoding of RFID data elements based on polyethylene moulding materials and rules from ISO/LEC 15962, First Edition compounds KS ISO 28560-3:2014 Kenya Standard - Information and KS 1582-3:2001 Method of test for plastics Part 3: documentation - RFID in libraries Part 3: Determination of bulk factor for plastic Fixed length encoding, First Edition moulding materials KS ISOITS KS 1667:2001 List of pigments and colorants for use in 28560-4:2014 Kenya Standard - Information and plastic in contact with foodstuffs, documentation - RFID in libraries Part 4: pharmaceuticals and drinking water Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with KS 1427:1997 Specification for microcrystalline wax of partitioned memory, First Edition petroleum origin KS ISO 25577:20 13 Kenya Standard - Information and KS 515:2010 Gasohol 10 (V/V) - Specification documentation - MarcXchange, First KS 1507:1999 Specification for multipurpose automotive Edition gear lubricant (extreme pressure gear oil) KS ISO 25964-2:2013 Kenya Standard - Information and KS 2053-1:2007 Carbon black used in rubber products - documentation - Thesauri and Specification Part 1: Intermediate super interoperabilhty with other vocabularies Part abrasion furnace carbon black (ISAF) - 2: Interoperabiity with other vocabularies, N2l9 grade First Edition KS 2053-2:2007 Carbon black used in rubber products - KS 2645-1:2016 Kenya Standard - Special educational Specification Part 2: Intermediate super needs - Tool-kit Part 1: Principles and abrasion furnace carbon black (ISAF) - policies, First Edition N220 grade 2928 THE KENYA GAZETTE - - 17th August, 2018

KS 2053-3:2007 Carbon black used in rubber products - KS ISO 17604:2003 Microbiology of food and animal feeding Specification Part 3: Intermediate super stuffs - Carcass sampling for

abrasion furnace carbon black (ISAF) - microbiological analysis N231 grade KS ISO 18593:2004 Microbiology of food and animal feeding

KS 2053-4:2007 Carbon black used in rubber products - stuffs - Horizontal methods for sampling Specification Part 4: High abrasion furnace techniques from surfaces using contact

carbon black (HAF) - N330 grade plates and swabs

KS 2053-5:2007 Carbon black used in rubber products - KS ISO 20837:2006 Microbiology of food and animal feeding Specification Part 5: Fast extrusion furnace stuffs - Polymerase chain reaction (PCR) for

carbon black (FEF) - N550 grade the detection of food-borne pathogens - Requirements for sample preparation for Food and Agriculture qualitative detection KS ISO 948:1980 Spices and Condiments - Sampling KS ISO 20838:2006 Microbiology of food and anintal feeding KS EAS 57:2000 Part 1 and 2 Ground nuts - Specification stuffs - Polymerase chain reaction (PCR) for KS 2263:2010 Bay leaf— Specification the detection of food-borne pathogens - Requirements for amplification and KS 2264:2010 Parsley - Specification detection for qualitative method

KS 2265:20 10 Mixed herbs - Specification KS ISO 21527-1:2008 Microbiology of food and animal feeding KS 1039:1993 Methods for liquoring coffee for analysis stuffs - Horizontal method for the enumeration of yeasts and moulds Part 1: KS 1052:2011 Roasted coffee beans and roasted ground Colony count technique in products with coffee - Specification water activity greater than 0,95 KS 175:2011 Pure instant coffee - Specification KS ISO 21527-2:2008 Microbiology of food and animal feeding KS 173:2011 Glossary of terms used in coffee trade stuffs - Horizontal method for the enumeration of yeasts and moulds Part 2: KS 2221:2011 Coffee packaging - Specification Colony Count technique in products with KS ISO 4150:2011 Green coffee or raw coffee size analysis water activity less than or equal to 0,95 manual and machine sieving KS ISO 21528-2:2004 Microbiology of food and animal feeding

KS ISO 6666:2011 Coffee sampling - Triers for green coffee or stuffs - Horizontal methods for the detection raw coffee and parchment coffee and enumeration of Enterobacteriaceae Part 2: Colony-count method KS ISO 24114:2011 Instant coffee-Criteria for authenticity KS ISO 21567:2004 Microbiology of food and animal feeding KS ISO 6667:1985 Green coffee - Determination of proportion stuffs - Horizontal method for the detection of insect-damaged beans of shigella spp KS ISO 6668:2008 Green coffee - Preparation of samples for KS ISO 21807:2004 Microbiology of food and animal feeding use in sensory analysis stuffs - Determination of water activity. KS ISO 20481:2008 Coffee and coffee products - Determination KS ISO 21871:2006 Microbiology of food and animal feeding of the caffeine content using high stuffs - Horizontal method for performance liquid chromatography (HPLC) the determination of low numbers of - Reference method presumptive Bacillus cereus - Most probable KS EAS 130:1999 Green coffee beans - Specification number technique and detection method KS ISO 8455:2011 Green coffee Guidelines for storage and KS ISO 22174:2005 Microbiology of food and animal feeding

transport stuffs - Polymerase chain reaction (PCR) for KS CAC/RCP 69:2009 Code of practice for the prevention and the detection of food-borne pathogens - reduction of ochratoxin A contamination in General requirements and definitions coffee KS ISO 483 1:2006 Microbiology of food and animal feeding

stuffs - Horizontal method for the detection KS ISO 15598:1999 Tea - Determination of crude fibre content and enumeration of Coliforms - Most KS 65:20 13 Black tea - Specification probable number technique KS ISO 16140:2003 Microbiology of food and animal feeding KS ISO 4832:2006 Microbiology of food and animal feeding

stuffs - Protocol for the validation of stuffs - Horizontal method for the

alternative methods enumeration of Coliforms - Colony-count KS ISO 16649-1:2001 Microbiology of food and animal feeding technique stuffs - Horizontal method for the KS ISO 6887-1:1999 Microbiology of food and animal feeding

enumeration of B-glucuronidase-positive stuffs - Preparation of test samples, initial Escherichia coli Part 1: Colony-count suspension and decimal dilutions for technique at 44 using membranes and 5- microbiological examination Part 1: General bromo-4 rules for the preparation of the initial KS ISO 16649-2:200 1 Microbiology of food and animal feeding suspension and decimal dilutions stuffs - Horizontal method for the KS ISO 6887-2:2003 Microbiology of food and animal feeding

enumeration of B-glucuronidase-positive stuffs - Preparation of test saples, initial Escherichia coli Part 2: Colony-count suspension and decimal dilutions for technique at 44 using 5-bromo-4-chloro-3- microbiological examination Part 2: Specific indo rules for the preparation of meat KS ISO 16654:200 Microbiology of food and animal feeding KS ISO 6887-3:2003 Microbiology of food and animal feeding stuffs - Horizontal method for the detection stuffs - Preparation of test samples, initial of escherichia coli 0157 suspension and decimal dilutions for KS ISO 17410:2001 Microbiology of food and animal feeding microbiological examination Part 3: Specific stuffs - Horizontal method for the rules for the preparation of fish enumeration of psychrotrophic KS CAC/GL 44:2003 Principles for the risk analysis of foods microorganisms. derived from modern biotechnology 17th August, 2018 THE KENYA GAZETTE - 2929

KS 2293:2011 Genetically modified organisms and derived KS CAC/GL 69:2008 Guidelines for the validation of food safety products - General guidelines to methods of control measures analysis KS CODEX KS 2335:2011 Foodstuffs - Methods of analysis for the STAN 193:1995 Codex general standard for the contaminants detection of genetically modified organisms and toxins in foods and derived products - sampling strategies KS 2243-1:2010 Specification for Puppy food Part 1: KS CAC/GL 74:2010 Guidelines on performance criteria and Complete meal validation of methods for detection, Urea molasses block as ruminant feed identification and quantification and KS 2244:2010 - Specification specification of specific DNA sequences and supplement specific proteins in food KS 144:1979 Code of practice for pig housing KS ISO 6887-4:2003 Microbiology of food and animal feeding KS EAS 233:200 1 Specification for ostrich feed stuffs - Preparation of test samples, initial KS 1651:2000 Glossary of terms for animal feedstuffs suspension and decimal dilutions for microbiological examination Part 4: KS 1741:2001 Method of test for T2 toxin in animal Specific rules for the preparation of products feedstuffs other than milk and milk products, meat and KS 2616:1996 Specification for wheat bran meat products, and fish and fishery products KS 63-3:1989 Methods of test for animal feedstuffs Part 3: KS ISO 6887-5:2010 Microbiology of food and animal feeding Bacteriological tests. stuffs- Preparation of test samples, initial suspension and decimal dilutions for KS CAC RCP 38:1993 Recommended international code of practice microbiological examination Part 5: Specific for control of the use of veterinary drugs rules for the preparation of milk KS CAC/RCP 54:2004 Code of practice on good animal feeding KS ISO 6888-1:1999 Microbiology of food and animal feeding KS CAC/RCP 61:2005 Code of practice to minimize and contain stuffs - Horizontal method for the antimicrobial resistance. enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and KS CACIMISC 5:1993 Glossary of terms and definitions (residues other species) Part 1: Technique using of veterinary drugs in foods) Baird-Parker agar medium KS CODEX KS ISO 6888-2:1999 Microbiology of food and animal feeding STAN 3:1995 Residues of veterinary drugs in foods stuffs - Horizontal method for the KS EAS 230:2001 Malze bran as livestock feed - Specification enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and KS EAS 231:2001 Bone meal for compounding animal feeds - other species) Part 2: Technique using rabbit Specification plasma fibrinogen agar medium KS EAS 232:2001 Maize gluten feed - Specification KS ISO 6888-3:2003 Microbiology of food and animal feeding KS EAS 287:2002 Oil-seed cakes for compounding livestock stuffs - Horizontal method for the feeds - Specification enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and KS EAS 353:2004 Wheat bran for animal feeds - Specification other species) Part 3: Detection and MPN KS EAS 451-1:2007 Microbiology of food and animal feeding technique for low numbers stuffs - Horizontal method for the detection KS 220-7:198 Methods for microbiological examination of and enumeration of Listeria monocytogenes foods Part 7: Method of examination for Part 1: Detection method and clostridium clostridium botulinum KS EAS 45 1-2:2007 Microbiology of food and animal feeding botulinum toxin stuffs - Horizontal method for the detection KS ISO/TS and enumeration of Listeria monocytogenes 21872-1:2007 Microbiology of food and animal stuffs - Part 2: Enumeration method Horizontal method for the detection of Compounded pig feeds - Specification potentially enteropathogenic vibrio spp. Part KS EAS 55:2000 1: Detection of vibrio parahaemolyticus and KS EAS 58:2000 Dog feeds - Specification vibrio cholera KS EAS 75:2000 Dairy cattle feed supplements - KS ISOTFS Specification 21872-2:2007 Method for the detection of potentially KS EAS 88:2000 Animal feedstuffs - Methods of sampling enteropathogenic Vibrio spp. Part 2: Detection of species other than Vibrio KS EAS 90:2000 Compounded poultry feeds - Specification parahaemolyticus and Vibrio cholera KS ISO 10272-1:2006 Microbiology of food and animal feeding KS ISO 15213:2003 Microbiology of food and animal feeding stuffs - Horizontal method for detection and stuffs - Horizontal method for the enumeration of Campylobacter spp. Part 1: enumeration of sulfite-reducing bacteria Detection method. growing under anaerobic conditions KS ISO 10990-4:1999 - Animal (mammal) traps Part 4: Methods for KS ISO 7937:2004 Methods for the microbiological testing killing-trap systems used on land or examination of food and animal feeding underwater - Enumeration of Clostridium stuffs Animal (mammal) traps Part 5: Methods for Perfringens KS ISO 10990-5:1999 testing restraining traps KS CAC/GL 22:1999 Revised regional guidelines for the design of control measures for street-vended foods in KS ISO 13903:2005 Animal feeding stuffs - Determination of Africa amino acids content - Enzymatic KS EAS 151:2000 Hazard Analysis Critical Control Points KS ISO 15914:2004 Animal feeding stuffs (HACCP) determination of total starch content

- Determination of KS CAC/GL 61:2007 Guidelines on the application of general KS ISO 14181:2000 Animal feeding stuffs principles of food hygiene to the control of residues of organochlorine pesticides - Gas listeria monocytogenes in foods chromatographic method

2930 THE KENYA GAZETTE 17th August, 2018

KS ISO 14182:1999 Animal feeding stuffs - Determination of KS ISO 6869:2000 Animal feeding stuffs - Determination of

residues of organophosphorus pesticides - content of calcium, copper, iron, Gas chromatographic method magnesium, manganese, potassium, sodium

and zinc - Methods using atomic absorption KS ISO 14183:2005 Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents spectrometly

- Liquid chromatographic method using KS ISO 6870:2002 Animal feediflg stuffs - Qualitative post-column derivatization determination of zearalenone

KS ISO 14565:2000 Animal feeding stuffs - Determination of KS ISO 7485:2000 Animal feeding stuffs - Determination of

vitamin A content - Method using high- potassium and sodium content - Methods performance liquid chromatography using flame-emission spectrometry

- KS ISO 147 18:1998 Animal feeding stuffs Determination of KS ISO 8607:2003 Artificial insemination of animals - Frozen

aflatoxin B content of mixed feeding stuffs - semen of breeding bulls - Enumeration of Method using high-performance liquid living aerobic microorganisms chromatography KS ISO 9831:1999 Animal feeding stuffs, animal products, KS ISO 14797:1999 Animal feeding stuffs - Determination of faeces or urine - Determination of gross furazolidone content - Method using high- calorific value - Bomb calorimeter. performance liquid chromatography KS ISOITS 17764-1 Animal feeding stuffs-Determination of KS ISO 16472:2006 Animal feeding stuffs - Determination of content, of fatty. acids Part 1: Preparation of amylase-treated neutral detergent fibre methyl esters content (aNDF) KS CAC/RCP 45:1997 Code of practice for the reduction of KS ISO 16634-1:2008 Food products - Determination of the total aflatoxin BI in raw materials and nitrogen content by combustion according to supplemental feeding stuffs for milk the Dumas principle and calculation of the producing animals. crude protein content - Part 1: Oilseeds and animal feeding stuffs KS 157 2010 Diammonium/Monoammonium phosphate fertilizer - Specification KS ISO 17372:2008 Animal feeding stuffs - Determination of zearalenone by immunoaffinity column Electrotechnical chromatography and high performance KS IEC 60189-1:2007 Low-frequency cables and wires with PVC liquid chromatography insulation and PVC sheath Part 1: General

KS ISO 17375:2006 Animal feeding stuffs - Determination of test and measuring methods aflatoxin B 1 KS IEC 60189-2:2007 Low-frequency cables and wires with PVC

KS ISO 5061:2002 Animal feeding stuffs - Determination of insulation and PVC sheath Part 2: Cables in castor oil seed husks - Microscope method pairs, triples, quads and quintuples for inside installations KS ISO 5510: 1984 Animal feeding stuffs - Determination of the available lysine KS IEC 60684-1:2003 Flexible insulating sleeving Part I: Definitions and general requirements KS ISO 5984:2002 Animal feeding stuffs - Determination of crude ash KS ifiC 62021-1:2003 Insulating liquids - Determination of acidity Part I: Automatic potentiometric titration KS ISO 5985:2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid KS IEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils KSISO649O-2:1983 Analysis of animal feeding stuffs - Determination of calcium content Part 2: after ageing Atomic absorption spectrometric method KS IEC 60684-3-320 Flexible insulating sleeving Part 3: Specifications for individual types of KS ISO 6491:1998 Animal feeding stuffs - Determination of sleeving - Sheets 320 - Polyethylene phosphorus content - Spectrometric method terephthalate textile sleeving, lightly KS ISO 6492:1999 Animal feeding stuffs - Determination of fat impregnated content KS IEC 61868:1998 Mineral insulating oils - Determination of KS ISO 6493:1999 Animal feeding stuffs - Determination of kinematic viscosity at very low temperatures starch content - Polarimetric method KS IEC 61198:1993 Mineral insulating oils - Methods for the KS ISO 6495:1999 Animal feeding stuffs - Determination of determination of 2-furfural and related water-soluble chlorides content compounds

KS ISO 6496:1999 Animal feeding stuffs - Determination of KS 1603:2000 Specification for coupling devices for moisture and other volatile matter content welding cables

KS ISO 6497:2002 Animal feeding stuffs - Sampling KS IEC 60282-2:2000 Specification for high-voltage fuses Part 2:

KS ISO 6651:2001 Animal feeding stuffs - Semi-quantitative Expulsion fuses determination of aflatoxin B 1 - Thin-layer KS IEC 60465:1998 Specification for unused insulating mineral chromatographic methods oils for cables with oil ducts KS ISO 6654:1999 Animal feeding stuffs - Determination of KS IEC 60317-15:2004 Specifications for particular types, of urea Content winding wires Part 15: Polyesterlmide KS ISO 6655:1999 Animal feeding stuffs - Determination of enamelled round aluminium wite, class 180 soluble nitrogen content after treatment with KS IEC 61125:1992 Unused hydrocarbon-based insulating pepsin in dilute hydrochloric acid liquids - Test methods for evahu$iu the KS ISO 6865:2000 Animal feeding stuffs - Determination of oxidation stability crude fibre content - Method with KS .IEC 60189-1:2007 Low -frequency cables and wires with PVC intermediate filtration insulation and PVC sheath Part I: General KS ISO 6866:1999 Animal feeding stuffs - Determination of test and measuring methods free and total gossypol KS IEC 60189.2:2007 Low-frequency cables and wires with PVC KS ISO 6867:2000 Animal feeding stuffs - Determination of insulation and PVC sheath Part 2: Cables in vitamin B content - Method using high- pairs, triples. quads and quintuple8 for inside performance liquid chromatography installations 17th August, 2018 THE KENYA GAZETTE 2931

KS LEC 60684-1:2003 Flexible insulating sleeving Part 1: KS 1878-3:2010 Electrical power transmission and Definitions and general requirements distribution - Guidelines for the provision of electrical distribution networks in residential KS IEC 62021-1:2003 Insulating liquids - Determination of acidity Part 1: Automatic potentiometric titration areas Part 3: Overhead distribution in very low, low and moderate conditions KS fEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils KS 1859-3:2010 Electrical power transmission and after ageing distribution- High-voltage operating regulations Part 3: Model regulations - KS fEC 60684-3-320 Flexible insulating sleeving Part 3: Recommended model regulations relating to Specifications for individual types of power systems for operating, access control sleeving - Sheets 320 - Polyethylene and supervision of systems that exceed 1000 terephthalate textile sleeving, lightly v, distribution of electricity impregnated KS 1876-1:2010 Electrical power transmission and

KS IEC 61868:1998 Mineral insulating oils - Determination of distribution - Overhead power lines for kinematic viscosity at very low conditions prevailing in Kenya Part 1: Code temperatures. of practice

KS IEC 61198:1993 Mineral insulating oils - Methods for the KS 1883:2010 Electrical power transmission and

determination of 2-furfural and related distribution - Overhead power lines - compounds Installation of line conductors

KS 1603:2000 Specification for coupling devices for KS 2236-1:2010 Electricity supply - Quality of supply Part 1: welding cables Minimum standards.

KS IEC 60282-2:2000 Specification for high-voltage fuses Part 2: KS 2236-2:2010 Electricity supply - Quality of supply Part 2: Expulsion fuses Reporting guidelines

KS fEC 60465:1998 Specification for unused insulating mineral KS 2236-3:20 10 Electricity supply - Quality of supply Part 3: oils for cables with oil ducts Voltage characteristics, compatibility levels, limits and assessment methods KS fEC 60317-15:2004 Specifications for particular types of winding wires Part 15: Polyesterimide KS 22364:2010 Electricity supply - Quality of supply Part 4: enamelled round aluminium wire, class 180 Application guidelines for utilities

KS fEC 61125:1992 Unused hydrocarbon-based insulating KS 1868:2007 Overhead power lines - Loading tests on

liquids - Test methods for evaluating the structures oxidation stability KS IEC 61811-55:2010 Electromechanical elementary relays of KS 1859-5:2010 Electrical power transmission and assessed quality Part 55: Blank detail distribution- High-voltage operating specification - Electromechanical all-or- regulations Part 5: Standard procedure and nothing telecom relays of assessed quality - terminology for the issuing of operating Two change-over contacts, 11 mm x 7 instructions KS IEC 61869-1:2010 Instrument transformers. Part 1: General KS 1917:2010 ElectrIc power transmission and distribution requirements - Energized power lines - Maintenance KS IEC 60269-3:2010 Low-voltage fuses Part 3: Supplementary methods requirements for fuses for use by unskilled

KS 1876-2:2010 Electric power transmission and distribution persons ( fuses mainly for household and similar application) - Examples of - Overhead power lines for conditions prevailing in Kenya Part 2: Safely standardized systems of fuses A to F KS 1859-2:2010, Electrical power transmission and KS IEC 60439-4:2010 Low-voltage switchgear and control distribution- High-voltage operating assemblies Part 4: Particular requirements regulations Part 2: Voltage colour coding for assemblies for construction sites (ACS) diagrammatic displays in control rooms- KS IEC 61558-2:2010 Safety of power transformers, power Colour coding for wall-mounted operating supplies, reactors and similar products Part diagram 2-I: Particular requirements and test a for KS 1992:2010 Electrical power transmission and separating transformers and power supplies incorporating separating transformer distribution - Code of practice for animal deterrents for electric power supply KS fEC 62109-1:2010 Safety of power converters for use in substations photovoltaic power systems Part 1: General KS 1877:2010 Electrical power transmission and requirements

distribution - Guidelines for the application KS 1EC61558-2-2:2010 Safety of power transformers, power.- design, planning and conatnietion of isupplies, reactors and similar product Part medium voltage overhead power lines up to 2-2: Particular requirements and tests for and including 22 kV, using wooden poles control transformers and power supplies incorporating control transformer KS 1878-0:2010 Electrical power transmission and

distribution - Guidelines for the provision of KS IEC 61558-1:2010 Safety of power transformers, power electrical distribution networks in residential supplies, reactors and similar products Part areas Part 0: Definitions 1: General requirements and tests KS 1818-1:2010 Electrical power transmission and KS EAS 4962008 General purpose fuse links for domestic and

distribution - Guidelines for the provision of similar purposes (primarily for use in plugs) electrical distribution networks in residential - Specification areas Part 1: Planning and design of KS 1864:2010 Battery chargers - Performance distribution systems KS 1851-1:2009 Thermal solar systems and components - KS 1878-2-3:2010 Electrical power transmission and Solar collectors Part 1: General distribution - Guidelines for the provision of requirements. electrical distribution networks in residential ateas Part 2-3: Pieferred methods and KS 1851-2:2009 Thermal solar systems and components - materials for the installation Solar collectors Part 2: Test methods 2932 THE KENYA GAZE'fl'E --17th August, 2018

KS 1852-1:2009 Thermal solar systems and components - KS 120:1981 Method for determination of mass per unit Factory made systems Part 1: General length and mass per unit area of woven or requirements. knitted fabrics

KS 1852-2:2009 Thermal solar systems and components - KS 121:1981 Methods for determination of threads per Factory made systems Part 2: Test methods centimeter in woven fabrics

KS 1855-1:2009 Thermal solar systems and components - KS 1327:1999 Method for determination of resistance of Custom built systems Part 1: General textiles to attack by larvae of certain insect requirements pests.

KS 1855-2:2009 Thermal solar systems and components - KS 1328-1:1999 Method for determination of resistance of Custom built systems Part 2: Test method textiles to microbiological deterioration Part 1: Soil burial KS 1855-3:2009 Thermal solar systems and components - - Custom built systems Part 3: Performance KS 1328-2:1999 Method for determination of resistance of characterization of stores for solar heating textiles to microbiological deterioration Part systems Agar plate using fungi KS 1869:2009 Determination of solar reflectance near KS 1328-3:1999 Method for determination of resistance of ambient temperature using a portable solar textiles to microbiological deterioration Part reflectometer - Test method Agar plate using bacterial KS 1870:2009 Exposure of solar collector cover materials KS 134:1981 Specification for woven bags (natural fibres) to natural weathering under conditions for sugar simulating stagnation mode - Test method KS 1389-1:1998 Test Methods for Cotton Fibres Part 1: KS 1872:2009 Standard practice for non-operational Equipment and artificial lighting for cotton exposure and inspection of a solar collector classing rooms KS 1873:2009 Standard practice for exposure of cover KS 1389-5:1998 Test methods for cotton fibres Part 5: materials for solar collectors to natural Determination of breaking tenacity of flat weathering under conditions simulating bundles operational mode KS 1396:1997 Test method for determination of resistance KS ISO 13434:2008 Kenya Standard - Geosynthetics - for surface wetting of fabrics (spray test) Guidelines for the assessment of durability KS 1434:1999 Specification for coated tarpaulin fabric KS ISO 105 A02:1993 Kenya Standard - Textiles - Tests for colour fastness Part A02: Grey scale for KS 1435:1999 Specification for coated fabrics for shoes assessing change in colour KS 1784:2003 Test method for determination of non-lint content of cotton KS ISO 105 A03:1993 Kenya Standard - Tests for colour fastness Part A02: Grey scale for assessing staining, KS 1965-4:2006 Sports mats Part 4: Determination of shock First Edition absorption

KS ISO 105 A04: 1989 Kenya Standard - Textiles - Tests for KS 1965-5:2006 Sports mats Part 5: Determination of the colour fastness Part A04: Method for the base friction instrumental assessment ofthe degree of staining of adjacent fabrics KS 1965-6:2006 Sports mats Part 6: Determination of the top friction KS 2234:20 10 Kenya Standard - Denim fabrics - Specification KS 1965-7:2006 Sports mats Part 7: Determination of static stiffness KS ISO 105 BOl :1994 Kenya Standard - Textiles - Tests forcolour fastness Part BOl: Colour fastnes KS 212:1982 Definitions of general terms, basic weaves to light: Daylight and plans for drafting, denting and lifting

KS 2234:2010 Denim fabrics - Specification KS 2234:2010 Kenya Standard - Denim fabrics - Specification KS 273:1999 Specification for woven bags (100 per cent) for clean coffee beans KS 2238:20 10 Kenya Standard - Baby shawls - Specification KS 363:1982 Methods for determination of dimensional change of woven fabrics on commercial KS 2245:2010 Kenya Standard - Cotton ear buds - Specification laundering near the boiling point KS 1028:1991 Methods of test for webbings and braids KS 364:2006 Woven cellulosic fibre apparel fabrics - Specification KS 10351991 Specification for kitenge KS 365:2006 Woven man-made fibres apparel fabric - KS 1037:1999 Methods of test for woven bags Specification KS 1056-1:1990 Specification for woven wrapping cloth Part KS 366:2006 Woven polyester/cellulosic blended apparel 1: Polypropylene cloth fabric - Specification KS 1057-1:1990 Methods of test for complete filled transport KS 437:1989 Method for determination of tear resistance packages - Woven bags Part 1: Method for of woven fabrics by falling pendulum the determination of resistance to vertical (Elmendorf) apparatus impact by dropping Method of test for complete filled transport KS 48:1979 Determination of resistance to tearing of KS 1052:1990 woven fabrics by wing-rip technique packages - Bags KS 482:1994 Specification for woven bags KS 1057-3:1990 Methods of test for complete, filled transport (polypropylene) for seeds packages - Woven bags Part 3: Method of test for stacking using compression tester KS 520:1992 Specification for woven fabrics used for suits, jackets, slacks, trousers and skirts KS 1126-1:1993 Kenya standard for neckties Part 1: Neckties made from woven fabrics KS 214-1:1982 Specification for woven interlinings Part 1: Woven interlinings for shirts KS 119:1981 Method for determination of breaking load and elongation (strip method) of woven KS 214-2:1985 Specification for woven interlinings Part 2: fabrics Woven lining for apparel fabrics 17th August, 2018 THE KENYA GAZETTE 2933 KS 214-3:1981 Specification for woven interlinings Part 3: KS EAS 262:2007 Woven fabrics - Determination of Woven lining fabrics for men's and boys' dimensional change on commercial apparel laundering near the boiling point KS 528:1984 Specification for flat cotton wicks KS EAS 252 Textile fabrics - Method for determination of water repellency of fabrics by cone test KS 539:1985 Specification for men's and boys' woven pyjama fabric. KS ISO 12947-1:1998 Textiles - Determination of abrasion resistance of fabrics by Martindale method KS 542-1:1990 Specification for the national flag of Kenya Part 1: Martindale abrasion testing apparatus Part 1: Cotton, man-made fibres and blends KS ISO 12947-2:1998 Textiles - Determination of abrasion KS 542-2:1990 Specification for the national flag of Kenya resistance of fabrics by Martindale method Part 2: Wool/Synthetic blends Part 2: Determination of specimen KS 544:1985 Specification for woven bags (natural fiber) breakdown for rice KS ISO 12947-3:1998 Textiles - Determination of abrasion KS 586-1:1985 Specification for webbings Part 1: Cotton resistance of fabrics by Martindale method webbing Part 3: Determination of mass loss

KS 586-2:1988 Specification for webbings Part 2: Webbings KS ISO 12947-4:1998 Textiles - Determination of abrasion made wholly or partly from synthetic fibres resistance of fabrics by Martindale method Part 4: Assessment of appearance change. KS 606:1993 Specification for bed sheets made from blended polyester/cellulosic fabric or KS ISO 13937-1:2000 Textiles - Tear properties of fabrics Part 1: polyester and cellulosic combination fabric Determination of tear force using Ballistic pendulum method (Elmendorf) KS 607-1-5:1985 Specification for standard adjacent fabrics KS ISO 13937-2:2000 Textiles - Tear properties of fabrics Part 2: KS 607-7:1990 Specification for standard adjacent fabrics Determination of tear force of trouser- Part 7: Triacetate shaped test specimens (Single tear method) KS 607-8:1990 Specification for standard fabrics Part 8: KS ISO 13937-3:2000 Textiles - Tear properties of fabrics Part 3: Cotton Determination of tear force of wing-shaped KS 628:1997 Specification for elastic webbing test specimens (Single tear Method)

KS 697-1:1990 Code of practice for grading of textile KS ISO 139374:2000 Textiles - Tear properties of fabrics Part 4: materials Part 1: Fabrics Determination of tear force of tongue- shaped test specimens (Double tear Method) KS 777-1:1989 Glossary of terms relating to weaving and weaving preparatory - Part 1: Cone and KS ISO 5085-1:1989 Textiles - Determination of thermal cheese winding resistance Part 1: Low thermal resistance KS 777-2:1987 Glossary of terms related to weaving and KS ISO 5085-2:1990 Textiles - Determination of thermal resistance Part 2: High thermal resistance. weaving preparatory - Part 2: Warp preparation KS ISO/IEC Kenya Standard - Information Technology KS 779-3:2003 Carpets - Specification Part 3: Woven 7501-1:2008 carpets Identification cards- Machine readable travel documents Part 1: Machine readable KS 834-1:1987 Test methods for determination of passport dimensions of woven fabrics Part 1: Measurement of width of pieces KS ISO/IEC 7501-2:1997 Kenya Standard - Information Technology KS 834-2:1987 Test methods for determination of Identification cards - Machine readable dimensions of woven fabrics Part 2: travel documents Part 2: Machine readable Measurement of length of pieces visa KS 893-2:1994 Specification for upholstery fabrics Part 2: KS ISO/IEC Coat fabrics 750 1-3:2005 Kenya Standard - Information technology identification cards - Machine readable KS EAS 156-1:2000 Woven bags from natural fibres - Specification Part 1: Woven bags for cereals travel documents Part 3: Machine readable official travel documents KS EAS 156-2:2000 Woven bags from natural fibres - Specification Part 2: Woven bags for milled KS ISO/IEC products 180 13-1:2005 Kenya Standard - Information technology —Personal identification - ISO compliant KS EAS 156-3:2000 Woven bags from natural fibres - driving license Part 1: physical Specification Part 3: Woven bags for sugar characteristics and basic data set KS EAS 225-1:2001 Umbrella fabrics - Specification Part 1: KS ISO/LEC Cotton fabrics 180 13-2:2008 Kenya Standard - Information technology - Personal identification - ISO compliant KS EAS 225-2:2001 Umbrella fabrics - Specification Part 2: Man-made fibre fabric driving license Part 2: Machine-readable technologies, First Edition KS EAS 225-3:2008 Umbrella fabrics - Specification Part 3: Silk fabrics KS ISOIIEC 18013-3:2005 Kenya Standard - Information technology KS EAS 226:2001 Kitenge - Specification identification cards - Machine readable

KS EAS 248:200 1 Textiles - Methods for determination of travel documents Part 3: Machine readable threads per centimetre in woven fabrics. official travel documents Terminology work - Vocabulary Part 2: KS EAS 259-1:2001 Packaging - Methods of test for complete, KS 1087-2:2000 filled transport packages - Woven bags Part Computer applications 1: Determination of resistance to vertical KS ISO/IEC 23988:2007 Information technology - A code of impact by dropping. practice for the use of information technology (IT) in the delivery of KS EAS 261 Textile - Determination of pH value of aqueous extracts of textile materials assessments

2934 THE KENYA GAZEFE 17th August, 2018

KS ISOIIEC KS ISO/IEC 1704:2010 Conformity assessment - General 2382-36:20008 Information Technology - Vocabulary Part requirements for proficiency testing 36: Learning education and training Trade Affairs KS ISO/IEC/TR 24704:2004 Information technology - Customer KS ISO 20022-6:2009 Kenya Standard - Financial services - premises cabling for wireless access points Universal Financial Industry message scheme Part 6: Message KS 1087-2:2000 Terminology work - Vocabulary Part 1: Theory and application KS ISO 22307:2008 Kenya Standard - Financial Services - Privacy Impact Assessment KS ISO/IEC 2382-36:2008 Information Technology - Vocabulary Part KS ISO 13616-2:2007 Kenya Standard - Financial services 36: Learning education and training International Bank Account Number (IBAN) Part 2: Role and responsibilities of the KS 08.1221:1995 Specification for crepe bandages Registration Authority KS 639-1:1989 Specification for bandages Part 1: Cotton KS 150 13492:2007 Kenya Standard - Financial Services - gauze bandages Key management related data element- Engineering application and usage of ISO 8583 data elements 53 and 96 KS 301-2:2010 Plywood - Specification Part 2: Marine plywood KS ISO 6166:2001 Kenya Standard - Securities and related

financial instruments - International KS 301-3:2010 Plywood - Specification Part 3: Shuttering Securities Identification Numbering System work plywood (ISIN) KS 2222:2010 Synthetic resin adhesives for plywood - KS ISO 8532: 1995 Kenya Standard - Securities - Format for Specification transmission of certificate npnsbcrs KS 1607:2001 Specification for wooden packaging cases KS ISO 9019:1995 - Kenya Standard Securities - Numbering KS 2226:2010 Plywood - Test method of certificates

Services KS ISO 10383:2003 Kenya Standard - Securities and related financial instruments - .KSISO90042009 Managing for the sustained success of an Codes for exchanges and Market Identification (MIC) organization - A quality management approach KS iSO 13616-1:2007 Kenya Standard Financial services - International bank account number (IBAN) KS ISO 10005:2005 Quality management systems - Guidelines for quality plans Part 1: Structure of the IBAN KS 150 10962:1997 Kenya Standard - Securities and related KS ISO 100062003 Quality management systems - Guidelines for quality management in projects financial instruments - Classification of Financial Instruments (CFI code) KS ISO 10003:2007 Quality management - Customer KS ISO 15782-1:2009 Kenya Standard - Certificate management satisfaction - Guidelines for dispute for financial services Part I: Public key resolution external to organizations certificates KS ISO 10014:2006 Quality management - Guidelines for KS 1570-1:2001 realizing fmancial and economic benefits Specification for skin powders Part I: Body face powders KS ISO 100192005 Guidelines for the selection of quality KS 1570-2:2007 Skin powders - management system consultants and use of Specification Part 2: Baby their services powders KS EAS 862000 Sesame (simsim) oil for cosmetic industry - KS ISO 19011:2011 Guidelines for auditing management systems Specification KS 800:1989 KS ISO 14005:201 0 Environmental management systems - Specification for coconut oil for cosmetic industry Guidelines for the phased implementation of an environmental management system, KS 797:1989 Specification for sesame (simsim) oil for including the use of environmental cosmetic industry performance evaluation KS 798:1989 Specification for groundnut (peanut) oil for KS ISO 14006:2011 Environmentaj management systems - cosmetic industry Guidelines for incorporating ecodesign KS 799:1989 Specification for castor oil for cosmetic KS ISO 11462-1:2001 Guidelines for implementation of statistical industry process control (SPC) Part I: Elements of KS 1767-1:2006 Bath preparations - Specification Part 1: SPC Foam baths and shower gels KS 1S024153:2009 Random sampling and randomization KS 1769-1:2005 Glycerine Part I: Soap lye crude glycerine - procedures Specification KS ISO 13053-22001 Quantitative methods in process KS 1769-22005 Glycerine Part 2: Saponification improvement - Six Sigma Part 2: Tools (hydrolyzer) crude glycerine - and techniques Specification KS 1769-3:2005 Glycerine Part 3: Analytical reagent (AR) KSISO 13448-2:2004 Acceptance sampling procedkires based on glycerine - Specification the allocation of priorities principle (APP) Part 2 Coordinated single sampling plans KS 1769-4:2005 Glycerine Part 4: Chemically pure (CP) for acceptance sampling by attributes glycerine - Specification KS ISO/!EC 17007:2009 COnformity assessment - Guidance KS 1769-5:2005 Glycerine Part 5: Industrial white (1W) for drafting normative documents suitable glycerine - Specification for use for conformity assessment KS 1769-6:2005 Glycerine Part 6: Technical (TECH) KS 1SO'IEC 17021:2011 Conformity assessment Requirements for glycerine - Specification bodies providing audit and certification of KS 1769-7:2005 Glycerine Part 7: Dynamite grade (DYN) management systems glycerine - Specification 17th August, 2018 THE KENYA GAZETTE 2935

The following standards are hereby withdrawn forthwith: KS EAS 478-2:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the KS 927:1997 Standard - Specification for Kenya enumeration of coagulase-positive disinfecting general purpose detergents, to staphylococci (Staphylococcus aureus and be replaced by KS 927:2016 other species) Part 2: Technique using rabbit KS 1942:2005 Kenya Standard - Bathing bars - plasma fibrinogen agar medium to be Specification to be replaced by KS replaced by KS ISO 6888-2:1999 1942:20 16 KS EAS 478-3:2008 Microbiology of food and animal feeding KS 223 1:2010 Kenya Standard - Antibacterial bathing stuffs - Horizontal method for the

bars - Specification to be replaced by KS enumeration of coagulase-positive 2231:2016 staphylococci (Staphylococcus aureus and KS 553:2004 Lemon fruit juice preserved exclusively by other species) Part 3: Detection and MPN technique for low numbers to be replaced by physical means - Specification KS ISO 6888-3:2003 KS 556:2004 Pineapple fruit juice preserved exclusively KS 220-1:1979 Methods for microbiological examination of by physical means - Specification foods - General procedures and techniques KS 406:2004 Passion fruit juice preserved exclusively by to be replaced by KS ISO 7218:2007 physical means - Specification KS 220-2:1979 Methods for the microbiological KS 407:2004 Orange fruit juice preserved exclusively by examination of foods Part 2: General

physical means - Specification guidance for the enumeration of micro- KS 552:2008 Grapefruit juice preserved exclusively by organisms Colony count technique at 30 degrees C to be replaced by KS ISO physical means - Specification 4833:2003 KS 1179:1996 Apple fruit juice preserved exclusively by KS 220-3:1979 Methods for the microbiological physical means - Specification examination of foods Part 3: General KS CODEX STAN guidance for enumeration of coliforms - 83:1981 Specification for concentrated grape juice Colony count technique at 30° C to be preserved exclusively by physical means replaced by KS ISO 4832:2006 KS CODEX STAN KS 220-4:1981 Methods for the microbiological 247:2005 Codex general standards for fruit juices and examination of foods Part 4: General nectars guidance for the enumeration of coliforms - KS CAC/GL 12:1991 Guidelines for mixed fruit nectars Most probable number technique at 30°C to be replaced by KS ISO 4831:2006 KS CAC/GL 11:1991 Guidelines for mixed fruit juices KS 220-5:1981 Methods for the microbiological KS 554:2004 Apple fruit juice preserved exclusively by examination of foods Part 5: Enumeration of physical means - Specification coagulase - Positive staphylococci to be KS 404:1984 Specification for mango juice preserved replaced by KS ISO 6888-2:1999, KS ISO exclusively by physical means 6888-3:2003, KS ISO 6888-1:1999 KS 557:1985 Specification for guava nectar preserved KS 220-6:1981 Methods for microbiological examination of exclusively by physical means food Part 6: Examination for salmonellae to be replaced by KS ISO 67885:2001 KS ISO KS 555:1985 Specification for grape juice preserved 6579:2002, KS ISO 6579:2002/Cor 1:2004, exclusively by physical means KS ISO 6579:2002/Amd 1:2007 KS 405-3:1993 Specification for fruit nectars preserved KS 220-8:1994 Methods for the microbiological exclusively by physical means - Part 3: examination of foods Part 8: Enumeration of Specification for passion fruit nectar yeasts and mould in food to be replaced by KS405-1&2:1984 Specification for fruit nectars preserved KS ISO 21527-1:2008, KS 150 21527-2: exclusively by physical means Part I: 2008 Mango nectar Part 2: Nectars of certain KS ISO 7937:1985 Methods for the microbiological citrus fruits examination of food and animal feeding KS CODEX STAN stuffs. Enumeration of Clostridium 64:1981 Specification for concentrated orange juice Perfrigens to be replaced by KS ISO preserved exclusively by physical means, all 7937:2004

the above numbers 145 to 161 to be replaced KS ISO 13904:2005 Animal feeds stuffs - Determination of by KS 2640:2016 FruIts and Nectars - tryptophan content to be replaced by KS Specification ISO 13904:2016 KS 1552:2000 Code of Hygienic Practice for Production, KS EAS 478-2:2008 Microbiology of food and animal feeding Handling and Distribution of milk and milk stuffs - Horizontal method for the products to be replaced by KS 1552:2016 enumeration of coagulase-positive staphylococci (Staphylococcus aureus and KS 1095:2011 Food seasoning mixtures - Specification to other species) Part 2: Technique using rabbit be replaced by KS 1095:2016 plasma to be replaced by KS ISO 6888-

KS EAS 28:2000 Black Tea - Specification to be replaced by 2:1999 KS 65: 2013 KS EAS 478-3:2008 Microbiology of food and animal feeding KS ISO 6079:1990 Instant tea in solid form - Specification to stuffs - Horizontal method for the be replaced by KS 2405:2015 enumeration of coagulase-positive Coffee - Determination of caffeine content staphylococci (Staphylococcus aureus and KS ISO 4052:1983 other species) Part 3: Detection and MPN to be replaced by KS ISO 20481:2008 technique to be replaced by KS ISO 6888- KS ISO 7532:1985 Specification for instant coffee - Size 3:2003 analysis, Withdrawn December 2013, no KS 2356:20 12 Bio fertilizers - Specification, to be replacement replaced by KS 2356:2016 KS 593:2011 Green coffee bean specification to be KS 1690:2010 Roek phosphate fertilizers - Specification, replaced by KS EAS130:1999 to be replaced by KS 1690:2016

2936 THE KENYA GAZETTE 17th August, 2018

KS 2260:2010 Natural calcium phosphate for manufacture KS 1678-6:2003 Photovoltaic devices Part 6: Requirements of fertilizer - Specification, to be replaced for reference solar modules; to be replaced by KS 2260:2016 with KS fEC 60904-2:2007 KS 2261:2010 Single superphosphate fertilizer (powder) - KS 1678-7:2003 Photovoltaic devices Part 7: Computation of Specification, to be replaced by KS spectral mismatch error introduced in the 2261:2016 testing of a photovoltaic device; to be KS ISO 8157:1984 Fertilizers and soil conditions - replaced with KS IEC 60904-7:2008 Vocabulary, to be replaced by KS ISO KS 1678-8:2003 Photovoltaic devices Part 8: Measurement of 8157:2015 spectral response of a photovoltaic (PV) KS IEC 60666:1979 Detection and determination of specified device; to be replaced with KS IEC 60904- anti-oxidant additives in insulating oils. To 8:2014 be replaced by KS IEC 60666:2010 KS 1686:2003, Analytical expression for daily solar KS fEC 61039:1990 General classification of insulating liquids. profiles; to be replaced with KS LEC To be replaced by KS fEC 61039:2008 61725:1997 KS IEC 61109:1992 Composite insulators fora.c. overhead lines KS 1688:2003, crystalline silicon photovoltaic (PV) array - with a nominal voltage greater than 100 v- On-site measurement of I-V characteristics; Definitions, test methods and acceptance to be replaced with KS fEC 61829:2015

criteria To be replaced by KS IEC KS EAS 363-4:2005 Solar photovoltaic power systems - Test 61109:2008 procedures for main components Part 4: Test KS IEC 60502-2:2005 Power cables with extruded insulation and procedures for inverters, to be replaced with their accessories for rated voltages from 1kV KS fEC 62109-2:2011 (urn = 1,2 kV) up to 30 kV (Urn = 36 kV) - KS EAS 366:2005 Characteristic parameters of standalone Part 2: Cables for rated voltages of 6 kV photovoltaic (PV) systems, to be replaced (Urn = 7,2 kV) up to 30 kV ( Um = 36 kV). with KS IEC 62 124:2004 To be replaced by KS fEC 60502-2:20 14 KS EAS 363-5:2005 Solar photovoltaic power systems - Test KS LEC 60502-4:2005 Power cables with extruded insulation and procedures for main components Part 5: Test their accessories for rated voltages from 1 kV procedures for lumihaires, to be replaced (urn = 1,2 kV) up to 30 kV (Urn = 36 kV) - with KS LEC 60924 and KS IEC 60925 Part 4: Test requirements on accessories for KS EAS 389-3:2006 Solar photovoltaic power systems - Design, cables with rated voltages from 6 kV (Urn = installation, operation, monitoring and 7,2 kV) up to 30 kV ( Urn = 36 kV). To be maintenance - Code of practice Part 3: replaced by KS IEC 60502-4:2010. Operation of PV systems. Withdrawn with KS 312-1:1985 Low-voltage motor starters Part 1: Direct no replacement on-line (full voltage) ac. starters; to be KS EAS 362:2005 Solar photovoltaic - replaced by KS IEC 60947-4-1:2009 + power systems AMD1:2012 CSV Glossary, to be replaced with KS IEC /TS 61836:2007 KS IEC 61439-3:2001 Low-voltage switchgear and control gear KS EAS 365:2005 Thin-film terrestrial photovoltaic (PV) assemblies - Part 3: Particular requirements modules - for low-voltage switchgear and control gear Design qualification and type assemblies intended to be installed in places approval. Replaced by KS IEC 61646:2008 where unskilled persons have access for KS EAS 364:2005 Crystalline silicon terrestrial photovoltaic

their use - Distribution boards; to be (PV) modules - Design qualification and replaced with KS IEC 61439-3:2012 type approval. Replaced by KS LEC 612 15: 2005 KS IEC 61439-4:2010 Low-voltage switchgear and control assemblies Part 4: Particular requirements KS EAS 167:2000 Tungsten lamps for general lighting service for assemblies for construction sites (ACS); - Specification. Replaced with KS to be replaced with KS IEC 61439-4:2012 fEC 60064:1993 KS IEC 61439-5:2001 Low-voltage switchgear and control gear KS EAS 519-11:2008 Stationary lead-acid batteries Part 11: assemblies Part 5: Particular requirements Vented types - General requirements and for assemblies intended to be installed methods of test. Replaced with KS

outdoors in public places - Cable fEC 60896-11:2002 distribution cabinets (CDCS) for power KS EAS 519-21:2008 Stationary lead-acid batteries Part 21: Valve distribution in networks; to be replaced with regulated types - Methods of test. Replaced KS fEC 61439-5:2014 with KS IEC 60896-21:2004 KS 1673-2-1:2003 Generic specification for solar photovoltaic KS EAS 5 19-22:2008 Stationary lead-acid batteries Part 22: Valve systems - System design, installation, regulated types - Requirements. Replaced monitoring and maintenance Part 2: Test with KS fEC 60896-22:2004 procedures for main components - Section 1 Test procedures for photovoltaic modules; to KS fEC 60947-4-3:2001 Specification for low-voltage switchgear and be replaced with KS fEC 61215:2005 and control gear Part 4-3: Contactors and motor- KS IEC 61646:2008 starters - AC semiconductor controllers and contactors for non-motor loads. To be KS 1673-2-4:2003 Generic specification for solar photovoltaic replaced by KS fEC 60947-4-3:2014 systems - System design, installation, monitoring and maintenance Part 2: Test KS IEC 60947-4-2:200 1 Specification for low-voltage switchgear and

procedures for main components - Section control gear Part 4-2: Contactors and motor- 4: Test procedures for inverters; to be starters - AC semiconductor motor replaced with KS fEC 62109:2:2011 controllers and starters To be replaced by KS IEC 60947-4-2:2011 KS 1678-1:2003 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics; KS EAS 136:2007 Electric cables - Terminology. To be to be replaced with KS IEC 60904-1:2006 replaced by KS IEC 60050-461:2008 KS 1678-2:2003 Photovoltaic devices Part 2: Requirements KS EAS 204-2: 2001 Metallic conduits and fittings for electrical for reference solar cells; to be replace with installation - Specification Part 2: Fittings KS IEC 60904-2:2007 To be replaced by KS fEC 6 1386-24: 2004 17th August, 2018 THE KENYA GAZETFE 2937

KS 416:2000 Specification for knitted polyester fabric To KS 1941-2:2018 Kenya Standard - Scouring compounds - be replaced by KS EAS 220:2001 Specification Part 2: Antibacterial dishwashing paste, Second Edition KS 417:2000 Specification for polyester/cellulosic blended fabric To be replaced by KS EAS Chemical 222:2001 KS EAS 848:2016 Kenya Standard - Water-thinned priming KS 419:1983 Specification for knitted cotton fabric To be paints for wood - Specification, First replaced by KS EAS 227:200 1 Edition KS 119:1981 Method for determination of breaking load KS EAS 849:2016 Kenya Standard - Silk (sheen) emulsion and elongation (strip method) of woven paint for interior use - Specification, First fabrics, replaced by KS ISO 13934-1:2013 Edition

KS EAS 238:200 1 Textile materials - Tests for colour fastness - Kenya Standard - Matt solvent-borne Colour fastness to perspiration, replaced by KS EAS 850:2016 paint for interior and exterior use - KS ISO 105-E04:2013 Specification, First Edition KS EAS 254:2007 Textiles - Tear properties of fabrics - Determination of tear resistance by falling KS EAS 851:2016 Kenya Standard - Matt emulsion paint for pendulum (Elmendorf) apparatus, replaced interior and exterior use - Specification, by KS ISO 13937-1:2000 First Edition KS ISO/IEC KS EAS 852:2016 Kenya Standard - Air-dried roofing paint 11770-3:2008 Information technology -- Security - Specification, First Edition techniques - Key management Part 3: KS EAS 853-1:2016 Kenya Standard - Auto-refinishing paint Mechanisms using asymmetric techniques - Specification Part 1: Synthetic resin replaced by KS ISO/IEC 11770-3:2015 based, First Edition KS ISO/IEC KS EAS 853-2:2016 Kenya Standard - Auto refinishing paint 27033-1:2009 Information technology - Security - Specification Part 2: Nitrocellulose resin - Part 1: techniques Network security based, First Edition Overview and concepts replaced by KS ISO/IEC 27033-1:2015 KS EAS 854:2016 Kenya Standard - Thinner for nitrocellulose resin-based paints and KS ISO/IEC 27013:2012 Information technology - Security lacquers - Specification, First Edition techniques - Guidance on the integrated implementation of ISO/IEC 27001 and KS EAS 855:2016 Kenya Standard - Thinner for synthetic ISO/IEC 2-1,replaced by KS ISO/IEC resin-based auto-refinishing paints - 27013:20 15 Specification, First Edition

KS ISOIIEC 27010:2012 Information technology - Security KS EAS 856:2016 Kenya Standard - Pack acrylic resin-based techniques - Information security auto-refinishing paint - Specification, First management for inter-sector and inter- Edition organizational communications, replaced by KS ISO/IEC 27010:2015 KS EAS 857:2016 Kenya Standard - Thinner for acrylic resin based auto-refinishing paints - technology - Security KS ISO/IEC 27006:2011 Information Specification, First Edition techniques - Requirements for bodies certification of providing audit and KS 2157-1:2018 Kenya Standard - Hot applied information security management, replaced thermoplastic road marking pai - by KS ISO/IEC 27006:2015 Specification Part 1: Constituent material and mixtures, Second Edition KS 507:2005 Sanitary towels - Specification to be replaced by KS EAS 96:2008 KS 2 157-2:2018 Kenya Standard - Hot applied KS 1734:2003 Specification for dividers for mathematical Thermoplastic Road Marking paint - sets to be replaced by KS 1734:2016 Specification Part 2: Specification for road performance, Second Edition KS 2217-6:2010 Kenya Standard - Glossary of terms used in the education sector Part 6: University KS 421:2018 Kenya Standard - Newsprint - education, to be replaced by KS 2217- Specification, Third Edition 6:20 16 KS 921:2018 Kenya Standard - Kraft liner - Dated the 26th August, 2016. Specification, Second Edition CHARLES ONGWAE, KS ISO 14644-1:2015 Kenya Standard - Clean rooms and MR/5 159546 Secretary, National Standards Council. associated controlled environments Part 1: Classification of air cleanliness by particle concentration, First Edition GAZETFE NOTICE No. 8456 Electrotechnical THE STANDARDS ACT KS 2720:2016 (Cap. 496) Amd 1:2018 Kenya Standard - Nonwoven disposable wet wipes - Specification, DECLARATION OF KENYA STANDARDS AMENDMENT 1, First Edition PURSUANT to section 9 (1) of the Standards Act, the National KS ISO 11948:1996 Kenya Standard - Urine absorbing aids Standards Council declares the specifications or codes of practice Part 1: Whole product testing, First Edition appearing in the schedule hereto to be Kenya Standards with effect from the date of publication of this notice. KS 2757:2018 Kenya Standard - Fabric fashion hand bag - Specification, First Edition Number Title of Specfi cation or Code of Practice KS 1062:2018 Kenya Standard - Infant Outer wear Chemical garments - Specification, Second Edition Kenya Standard - Scouring compounds - KS 1941-1:2018 KS 214-1:2018 Kenya Standard - Woven interlinings for Specification Part 1: Dishwashing paste, apparel purposes - Specification Part 1: Second Edition Woven interlinings, Second Edition 2938 THE KENYA GAZETFE 17th August, 2018 KS 214-2:2018 Kenya Standard - Woven linings for KS EEC 61557-10:2013 Kenya Standard - Electrical safety in low apparel purposes - Specification Part 2: voltage distribution systems up to 1 000 V Woven linings, Second Edition a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS 2758:2018 Kenya Standard - Reusable nappy liners - Specification, First Edition protective measures Part 10: Combined measuring equipment for testing, measuring KS 1620: 2018 Kenya Standard - Bathroom slippers - or monitoring of protective measures, Specification, Fourth Edition Second Edition KS 1943:2018 Kenya Standard - Light duty canvas shoes KS EEC 60287-1-1:2006 Kenya Standard - Electric cables - Specification, Second Edition Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) KS 2777:2018 Kenya Standard -- Sports balls - and calculation of losses - General, First Volleyballs - Specification, First Edition Edition KS 2771:2018 Kenya Standard - Aluminium binding KS EEC 60287-2-1:2006 Kenya Standard - Electric cables - wire for electrical purposes - Specification, First Edition Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal KS EEC 61557-1:2007 Kenya Standard - Electrical safety in low resistance, First Edition voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for KS EEC 60287-2-2:1995 Kenya Standard Electric cables - testing, measuring or monitoring of Calculation of the current rating Part 2: protective measures Part 1: General Thermal resistance - Section 2: A method requirements, Second Edition for calculating reduction factors for groups of cables in free air, protected from solar KS IEC 61557-2:2007 Kenya Standard - Electrical safety in low radiation, First Edition voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for KS ISO 4190-1:2010 Kenya Standard - Lift (elevator) testing, measuring or monitoring of installation Part 1: Class I, II, Ill and VI protective measures Part 2: Insulation lifts, Second Edition resistance, Second Edition KS ISO 4190-5:2006 Kenya Standard - Lift (elevator) KS EEC 61557-3:2007 Kenya Standard - Electrical safety in low installation Part 5: Control devices, signals voltage distribution systems up to 1 000 V and additional fittings, Second Edition a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS EEC 60984:2014 Kenya Standard - Live, working - protective measures Part 3: Loop Electrical insulating sleeves, First Edition impedance, Second Edition KS LAS 811-1: 2014 Kenya Standard - Code of practice for KS EEC 61557-4:2007 Kenya Standard -. Electrical safety in low safety of electrical installations Part 1: voltage distribution systems up to 1 000 V General, First Edition ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS LAS 811-2: 2014 Kenya Standard - Code of practice for protective measures Part 4: Resistance of safety of electrical installation Part 2: earth connection and equipotential bonding, Installation and maintenance of electric Second Edition supply stations and equipment, First Edition KS EEC 61557-5:2007 Kenya Standard - Electrical safety in low KS LAS 811-3: 2014 Kenya Standard - Code of practice for voltage distribution systems up to 1 000 V safety of electrical installations Part 3: a.c. and 1 500 V d.c. - Equipment for Installation and maintenance of overhead testing, measuring or monitoring of electric supply and communication lines, protective measures Part 5: Resistance to First EditIon earth, Second Edition KS LAS 811-4:2014 Kenya Standard - Code of practice for KS EEC 61557-6:2007 Kenya Standard - Electrical safety in low safety of electrical installations Part 4: voltage distribution systems up to I 000 V Installation and maintenance of a.c. and 1 500 V d.c. - Equipment for underground electric supply and testing, measuring or monitoring of communication lines, First Edition protective measures Part 6: Effectiveness of residual current devices (RCD) in iT, TN KS LAS 811-5: 2014 Kenya Standard - Code of practice for and IT systems, Second Edition safety of electrical installations Part 5: Operation of electric supply lines, KS IEC 61557-7:2007 Kenya Standard - Electrical safety in low communication lines and equipment, First voltage distribution systems up to 1 000 V Edition a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS EAS 111:1999 Kenya Standard - Aluminium conductors protective measures Part 7: Phase sequence, (AAC) for overhead power transmission - Second Edition Specification, First Edition KS EEC 61557-8:2014 Kenya Standard - Electrical safety in low KS EAS 112: 1999 Kenya Standard - Aluminium conductors, voltage distribution systems up to 1 000 V galvanized steel reinforced (ACSR) for ac. and 1 500 V d.c. - Equipment for overhead power transmission - testing, measuring or monitoring of Specification, First Edition protective measures Part 8; Insulation monitoring devices for IT systems, Second KS LAS 137-2:2000 Kenya Standard - PVC insulations and Edition sheaths of electric cables and cords Part 2: Methods of measurement of thickness and KS EEC 61557-9:20 14 Kenya Standard - Electrical safety in low overall dimensions and determination of the voltage distribution systems up to 1 000 V mechanical properties, First Edition a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS LAS 137-3:2000 Kenya Standard - PVC insulations and protective measures Part 9: Equipment for sheaths of electric cables and cords - insulation fault location in IT systems, Specification Pan 3: Thennai-ageiag Second Edition methods, First Edition 17th August, 2018 THE KENYA GAZETTE 2939

KS ISO 25745-2:2015 Kenya Standard - Energy performance of KS IEC lifts, escalators and moving walks Part 2: 61334-4-511:2000 Kenya Standard - Distribution automation Energy calculation and classification for using distribution line carrier systems Part lifts (elevators), First Edition 4-5 11: Data communication protocols - Systems management - CIASE protocol, KS ISO 25745-3:2015 Kenya Standard - Energy performance of First Edition lifts, escalators and moving walks Part 3: Energy calculation and classification of KS IEC escalators and moving walks, First Edition 61334-4-512:2001 Kenya Standard - Distribution automation using distribution line carrier systems Pail KS IECITR 4-512: Data communication protocols - 61334-1-1:1995 Kenya Standard - Distribution automation System management using profile 61334-5- using distribution line carrier systems Part - Management Information Base (MIB), 1: General considerations - Section 1: Distribution automation system First Edition architecture, First Edition KS IEC/TS KS IECITR 61334-5-2:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part 61334-1-2:1997 Kenya Standard - Distribution automation using distribution line carrier systems Part 5-2: Lower layer profiles - Frequency shift keying (FSK) profile, First Edition 1-2. .jcnera1 considerations - Guide for specification, First Edition KS IEC/TS KS IEC 1k 61334-5-3:2001 Kenya Standard - Distribution automation using distribution line carrier systems Part 61334-1-4:1995 Kenya Standard - Distribution automation using distribution line carier systems Part 5-3: Lower-layer profiles - Spread spectrum adaptive wideband (SS-AW) 1: General considerations - Section 4: Identification of data transmission profile, First Edition parameters concerning medium and low- KS IEC/TS voltage distribution mains, First Edition 61334-5-4:2001 Kenya Standard - Distribution automation using distribution line carrier systems Part KS IEC 61334-3-1:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part 5-4: Lower layer profiles - Multi-carrier modulation (MCM) profile, First Edition 3-1: Mains signalling requirements - Frequency bands and output levels, First KS IECI'TS Edition 61334-5-5:2001 Kenya Standard - Distribution automation KS IEC 61334-3-21:1996 Kenya Standard -. Distribution automation using distribution line carrier systems Part using distribution line carrier systems Part 5-5: Lower layer profiles - Spread Mains signalling requirements - Section spectrum -- Fast frequency hopping (SS- 21: MV phase-to-phase isolated capacitive FFH) profile, First Edition coupling device, First Edition KS IEC 61334-6:2000 Kenya Standard - Distribution automation KS IEC 61334-3-22:2001 Kenya Standard - Distribution automation using distribution line carrier systems Part using distribution line carrier systems Part 6: A-XDR encoding rule, First Edition 3.22: Mains signalling requirements - MV KS IEC 61334-4-61:1998 Kenya Standard - Distribution automation phase-to-earth and screen-to-earth intrusive using distribution line carrier systems Part coupling devices, First Edition 4-61: Data communication protocols - KS IEC 613344-1:1996 Kenya Standard - Distribution automation Network layer - Connectionless protocol, using distribution line carrier systems Part First Edition Data communication protocols - Section 1: Reference model of the KS JEC 60870-5-2:1992 Kenya Standard - Telecontrol equipment communication system, First Edition and systems Part 5: Transmission protocols - Section 2: Link transmission procedures. KS IEC 61334-4-32:1996 Kenya Standard - Distribution automation First Edition using distribution line carner systems Part 4: Data communication protocols - KS IEC 60870-5-3:1992 Kenya Standard -- Telecontrol equipment Section 1: Reference model of the and systems Part 5: Transmission protocols communication system, First Edition - Section 3: General structure of application data. First Edition KS IEC 61334-4-33:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part KS IEC 60870-5-4:1993 Kenya Standard - Telecontrol equipment 4-33: Data communication protocols - and systems Part 5: Transmission protocols Data link layer - Connection oriented - Section 4: Definition and coding of protocol, First Edition application information elements, First Edition KS IEC 613344-41:1996 Kenya Standard - Distribution automation using distribution line carrier systems Part KS IEC 60870-5-5:1995 Kenya Standard - Telecontml equipment 4: Data communication protocols - and systems Part 5: Transmission protocols Section 41: Application protocol - - Section 5: Basic application functions, Distribution line message specification, First Edition First Edition KS IEC 60870-5-6:2006 Kenya Standard - Telecontrol equipment KS IEC 61334-4-42:1996 Kenya Standard - Distribution automation and systems Part 5-6: Guidelines for using distribution line carrier systems Part conformance testing for the IEC 60870-5 4: Data communication protocols - companion standards, First Edition Section 42: Application protocols KS IECftS Application layer, First Edition 60870-5-7:2013 Kenya Standard - Telecontrol equipment KS JEC 61334-5-1:2001 Kenya Standard - Distribution automation sad systems Part 5-7: Transmission using distribution line carrier systems Part protocols - Security extensions to IEC 5-1: Lower layer profiles - The spread 60870-5-101 and IEC 60870-5-104 frequency shift keying (S-FSK) profile, protocols (applying JEC 62351). First First Edition Edition 2940 THE KENYA GAZEUE 17th August, 2018

KS IEC KS IEC 60870-5-101:2003 60870-6-702: 2014 Kenya Standard - Telecontrol equipment Amd 1:2015 Kenya Standard - Telecontrol equipment and systems Part 6-702: Telecontrol and systems Part 5-101: Transmission protocols compatible with ISO standards protocols - Companion standard for basic and ITU-T recommendations - Functional telecontrol tasks, First Edition profile for providing the TASE.2 KS IEC application service in end systems, First 60870-5-102:1996 Kenya Standard - Telecontrol equipment Edition and systems Part 5: Transmission protocols KS IEC Section 102: Companion standard for the 60870-6-802: 2014 Kenya Standard - Telecontrol equipment transmission of integrated totals in electric and systems Part 6-802: Telecontrol power systems, First Edition protocols compatible with ISO standards KS IEC and ITU-T recommendations - TASE.2 60870-5-103:1997 Kenya Standard - Telecontrol equipment Object models, First Edition and systems Part 5-103: Transmission KS ISO 20875-1:2012 Kenya Standard - Dosimetry for exposures protocols - Companion standard for the to cosmic radiation in civilian aircraft Part informative interface of protection Conceptual basis for measurements, First equipment, First Edition Edition KS IEC KS ISO 20785-2:2011 Kenya Standard - Dosimetry for exposures 60870-5-104:2006 to cosmic radiatiol3 in civilian aircraft Part Amd 1:2016 Kenya Standard - Telecontrol equipment Characterization of instrument response, and systems Part 5-104: Transmission First Edition protocols - Network access for IEC 60870-5-101 using standard transport KS ISO 20785-3:20 15 Kenya Standard - Dosimetry for exposures profiles, First Edition to cosmic radiation in civilian aircraft Part Measurements at aviation altitudes, First KS IECITR Edition 60870-6-1:1995 Kenya 'Standard - Telecontrol equipment and systems Part 6: Telecontrol protocols KS IEC 62209-1:2016 Kenya Standard - Measurement procedure compatible with ISO standards and ITU-T for the assessment of specific absorption recommendations - Section 1: Application rate of human exposure to radio frequency context and organization of standards, First fields from hand-held and body-mounted Edition wireless communication devices Part 1: Devices used next to the ear (Frequency KS IEC/TR range of 300 MHz to 6 GHz), Second 60870-6-501: 1995 Kenya Standard - Telecontrol equipment Edition and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T KS IEC 62209-2:2010 Kenya Standard - Human exposure to recommendations - Section 501: TASE.1 radio frequency fields from hand-held and Service definitions, First Edition body-mounted wireless communication devices - Human models, instrumentation, KS !EC/TR and procedures Part 2: Procedure to 60870-6-502:1995 Kenya Standard - Telecontrol equipment determine the specific absorption rate and systems Part 6: Telecontrol protocols (SAR) for wireless communication devices compatible with ISO standards and ITU-T used in close proximity to the human body recommendations - Section 502: TASE.1 (frequency range of 30 MHz to 6 GHz), Protocol definitions, First Edition First Edition

KS IECITR KS OIMLR 117-1:2007 Kenya Standard - Dynamic measuring 60870-6-503:2014 Kenya Standard - Telecontrol equipment systems for liquids other than water Part 1: and systems Part 6-503: Telecontrol Metrological and technical requirements, protocols compatible with ISO standards Second Edition and ITU-T recommendations - TASE.2 KS OIML R 117-2:2014 Kenya Standard - Dynamic measuring Services and protocol, First Edition systems for liquids other than Water-Part 2: KS IECITS Metrological controls and performance 60870-6-504:1998 Kenya Standard - Telecontrol equipment tests, Second Edition

and systems Part 6-504: Telecontrol KS OIML R 117-3:2014 Kenya Standard - Dynamic measuring protocols compatible with ISO standards systems for liquids other than water Part 3: and ITU-T recommendations - TASE.1 Test report format, Second Edition User conventions, First Edition KS ISOIIEC KS IEC 15504-4:2004 Kenya Standard - Information technology

60870-6-601: 1994 Kenya Standard - Telecontrol equipment - Process assessment Part 4: Guidance on and systems Part 6: Telecontrol protocols use for process improvement and process compatible with ISO standards and ITU-T capability determination, First Edition recommendations - Section 601: Functional profile for providing the KS ISOIIEC connection-oriented transport service in an 15504-5:20 12 Kenya Standard - Information technology end system connected via permanent access - Process assessment Part 5: An exemplar to a packet switched data network, First software life cycle process assessment Edition model, First Edition KS fEC KS ISO/LEC 60870-6-701: 1998 Kenya Standard - Telecontrol equipment 15504-6:20 13 Kenya Standard - Information technology and systems Part 6-701: Telecontrol - Process assessment Part 6: An exemplar system life cycle process assessment model, protocols compatible with ISO standards First Edition and ITU-T recommendations - Functional

profile for providing the TASE.1 KS ISOIIEC 33001:2014 Kenya Standard - Information technology

application service in end systems, First - Process assessment - Concepts and Edition terminology, First Edition 17th August, 2018 THE KENYA GAZETTE 2941

KS ISO/IEC 33002:2015 Kenya Standard - Information technology KS ISO/IEC

- Process assessment Requirements for 18013-3:2017 Kenya Standard - Information technology performing process assessment, First - Personal identification - ISO-compliant Edition driving licence Part 3: Access control, authentication and integrity validation, KS ISOIIEC Second Edition TS 33030:20 17 Kenya Standard - Information technology - Process assessment - An exemplar KS ISO/IEC documented assessment process, First TR 30125:2016 Kenya Standard - Information technology Edition -- Biometrics used with mobile devices, First Edition KS ISO/IEC TS KS ISO/LEC 15504-8:2012 Kenya Standard - Information technology 24779-4:20 17 Kenya Standard - Information technology - Process assessment Part 8: An exemplar process assessment model for IT service - Cross jurisdictional and societal aspects management, First Edition of implementation of biometric technologies - Pictograms, icons and KS ISO/IEC symbols for use with biometric systems Part 15504-9:2011 Kenya Standard - Information technology 4: Fingerprint applications, First Edition

- Process assessment Part 6: An exemplar KS ISOIIEC 10116:2017 Kenya Standard - Information technology system life cycle process assessment model, - Security techniques - Modes of First Edition operation for an n-bit block cipher, Second Edition KS ISO/IEC 15504-10:2011 Kenya Standard - Information technology - Process assessment Part 10: KS ISO/IEC 29134:2017 Kenya Standard - Information technology Safety extension, First Edition - Security techniques - Guidelines for KS ISO 21500:2012, Guidance on project management, First privacy impact assessment, First Edition Edition KS ISO/IEC 18384-1:2016 Kenya Standard - Information technology KS ISO 19101-1:2014 Kenya Standard - Geographic information - Reference Architecture for Service - Reference model Part 1: Fundamentals, First Edition Oriented Architecture (SOA RA) Part 1: Terminology and concepts for SOA, First

KS ISO 19101-2:2008 Kenya Standard - Geographic information Edition Part 2: Imagery, First Edition KS ISO/IEC KS ISO 18384-2:20 1 Kenya Standard - Information technology - Reference Architecture for Service 19108:2002/Cor 1:2006 Kenya Standard - Geographic information Oriented Architecture (SOA RA) Part 2: - Temporal schema, First Edition Reference Architecture for SOA Solutions, First Edition KS ISO 19109:2015 Kenya Standard - Geographic information - Rules for application schema, Second KS ISO/IEC Edition 18384-3:2016 Kenya Standard - Information technology - Reference Architecture for Service KS ISO 19110:2016 Kenya Standard - Geographic information Oriented Architecture (SOA RA) Part 3: - Methodology for feature cataloguing, Service Oriented Architecture ontology, Second Edition First Edition

KS ISO 19111:2007 Kenya Standard - Geographic information KS ISO/IEC - referencing by coordinates, Spatial 19086-1:2016 Kenya Standard - Information technology Second Edition - Cloud computing - Service level agreement (SLA) framework Part 1: - Geographic information KS ISO 19111-2:2009 Kenya Standard Overview and concepts, First Edition - Geographic information - Spatial referencing by coordinates Part 2: Extension KS ISOIIEC for parametric values, First Edition 19086-3:2017 Kenya Standard - Information technology - Cloud computing - Service level KS ISO 19157:2013 Kenya Standard - Geographic information agreement (SLA) framework Part 3: Core - Data quality, First Edition conformance requirements, First Edition

KS ISO 19115-1:2014 Geographic information - Metadata Part 1: KS ISO/IEC 20933:20 16 Kenya Standard - Information technology Fundamentals, First Edition - Distributed Application Platforms and Services (DAPS) - Access Systems, First KS ISO 19115-2:2009 Kenya Standard - Geographic information Edition - Metadata Part 2: Extensions for imagery and gridded data, First Edition KS ISO/IEC 10118-1:2016 Kenya Standard - Information technology KS ISO/TS 19115-3:2016 Kenya Standard - Geographic information - Security techniques - Hash-functions - Metadata Part 3: XML schema implementation for fundamental concepts, Part 1: General, Second Edition First Edition KS ISO/IEC 11770-6:2016 Kenya Standard - Information technology KS ISO/IEC - Security techniques - Key management 18328-3:2016 Kenya Standard - Identification cards - Part 6: Key derivation, First Edition ICC-managed devices Part 3: Organization, security and commands for interchange, KS ISOIIEC First Edition 18370-1 :20 16 Kenya Standard - Information technology - Security techniques - Blind digital KS ISOIIEC signatures Part 1: General, First Edition 18745-2:2016 Kenya Standard - Information technology - Test methods for machine readable KS ISOIIEC travel documents (MRTD) and associated 19592-1 :20 16 Kenya Standard - Information technology devices Part 2: Test methods for the - Security techniques - Secret sharing contactless interface, First Edition Part 1: General, First Edition 2942 THE KENYA GAZETFE 17th August, 2018

KS ISOIIEC 24159:2017 Kenya Standard - Information technology KS ISO/IEC - Security techniques - Test requirements 11581-40:2011 Kenya Standard - User interface icons Part for cryptographic modules, Second Edition 40: Management of icon registration, First Edition KS ISO/IEC 10741-1:1995 Kenya Standard - User system interfaces KS ISO/IEC 24738:2006 Kenya Standard - Icon symbols and - Dialogue interaction Part 1: Cursor functions for multimedia link attributes, control for text editing, First Edition First Edition KS ISO/IEC KS !SO/IEC 14755:1997 Kenya Standard - Input methods to enter 30113-1:2015 Kenya Standard - User interface - characters from the repertoire of ISOIIEC Gesture-based interfaces across devices and 10646 with a keyboard or other input methods Part 1: Framework, First Edition device, First Edition KS ISO/IEC KS ISO/IEC 15411:1999 Kenya Standard - Segmented keyboard 17549-2:20 15 Kenya Standard - Infonnation technology layouts, First Edition - User interface guidelines on menu navigation Part 2: Navigation with 4- KS ISO/IEC 15412:1999 Kenya Standard - Portable computer direction devices, First Edition keyboard layouts, First Edition KS ISOIIEC 18021:2002 Kenya Standard -. Information technology KS ISO/IEC -- User interfaces for mobile tools for TR 15440:2016 Kenya Standard - Future keyboards and management of database communications in other input devices and entry methods, First a client-server model, Edition 1 Edition KS ISOIIEC KS ISO/IEC 9995-1:2009 Kenya Standard - Keyboard layouts for

TR 11580:2007 Kenya Standard - Information technology text and office systems Part 1: General - Framework for describing user interface principles governing keyboard layouts, objects, actions and attributes, First Edition Second Edition KS ISOIIEC KS ISO/IEC 9995-2:2009 Kenya Standard - Keyboard layouts for 'FR 19765:2007 Kenya Standard - Survey of icons and text and office systems Part 2: symbols that provide access to functions Alphanumeric section, Second Edition and facilities to improve the use of information technology products by the KS ISO/IEC 9995-3:2010 Kenya Standard - Keyboard layouts for elderly and persons with disabilities, First text and office systems Part 3: Edition Complementary layouts of the alphanumeric zone of the alphanumeric KS ISO/IEC section, Edition 2 'FR 19766:2007 Kenya Standard - Guidelines for the design of icons and symbols accessible to KS ISO/IEC 9995-4:2009 Kenya Standard - Keyboard layouts for all users, including the elderly and persons text and office systems Part 4: Numeric with disabilities, First Edition section, Second Edition

KS ISO/IEC 18035:2003 Kenya Standard - Icon symbols and KS ISOIIEC 9995-5:2009 Kenya Standard - Keyboard layouts for functions for controlling multimedia text and office systems -- Part 5: Editing software applications, First Edition and function section, Second Edition

KS ISO/IEC 18036:2003 Kenya Standard - Icon symbols and ISO/LEC 9995-7:2009 Kenya Standard - Keyboard layouts for functions for World Wide Web browser text and office systems Part 7: Symbols toolbars, First Edition used to represent functions, Edition 2 KS ISO/IEC 1S0/IEC 9995-8:2009 Kenya Standard - Keyboard layouts for

15141-1:2000 Kenya Standard - User system interfaces text and office systems Part 8: Allocation of and symbols -- Icon symbols and functions letters to the keys of a numeric keypad,

Part 1: Icons - General, First Edition Second Edition KSISO/IEC KS ISO/IEC 9995-9:20 16 Kenya Standard - Keyboard layouts for

TR 11581-1:2011 Kenya Standard - User interface icons Part text and office systems Part 9: Multi- 1: Introduction to and overview of icon lingual, multiscript keyboard layouts, First standards, First Edition Edition KS ISO/JEC KS ISO/IEC 9995-10:2013 Kenya Standard - Keyboard layouts for 11581-2:2000 Kenya Standard - User system interfaces text and office systems Part 10: and symbols -- Icon symbols and functions Conventional symbols and methods to Part 2: Object icons, First Edition represent graphic characters not uniquely recognizable by their glyph on keyboards KS ISO/IEC and in documentation, First Edition 11581-3:2000 Kenya Standard - User system interfaces and symbols Icon symbols and functions KS ISOIIEC 9995-11:2015 Kenya Standard - Keyboard layouts for Part 3: Pointer icons, First Edition office systems -- Part 11: Functionality of dead keys and repertoires of characters KS ISO/IEC entered by dead keys, First Edition 11581-5:2004 Kenya Standard - User system interfaces and symbols -- Icon symbols and functions KS ISO/IEC 24757:2008 Kenya Standard - Keyboard interaction PartS: Tool icons, First Edition model - Machine-readable keyboard KS ISO/IEC description, First Edition

11581-6:1999 Kenya Standard - User system interfaces Engineering and symbols - Icon symbols and functions Part 6: Action icons, First Edition KS ISO 4254-14:2016 Kenya Standard - Agricultural machinery safety Part 14: Bale wrappers, First Edition KS ISO/IEC

11581-102010 KenyaStandard - UacrinterfaceiconsPart KS ISO 57 18:2013 Kenya Standard - Harvesting equipment 10: Framework and general guidance, First - Blades for agricultural rotary mowers -- Edition Requirements, First Edition 17th August, 2018 THE KENYA GAZETTE 2943

KS ISO 17101-1:2012 Kenya Standard - Agricultural machinery KS EAS 18-1:2017 Kenya Standard - Cement Part 1: - Thrown-object test and acceptance Composition, specification and conformity• criteria Part 1: Rotary mowers, First criteria for common cements, Second Edition Edition KS ISO 17101-2:2012 Kenya Standard - Agricultural machinery KS EAS 18-2:2017 Kenya Standard - Cement Part 2: - Thrown-object test and acceptance Conformity evaluation, Second Edition criteria Part 2: Flail mowers, First Edition KS EAS 148-1:2017 Kenya Standard - Cement - Test KS ISO 5682-1:2017 Kenya Standard - Equipment for crop methods Part 1: Determination of strength, protection - Spraying equipment Part 1: Second Edition Test methods for sprayer nozzles, First Edition KSEAS 148-2:2017 Kenya Standard - Cement - Test methods Part 2: Chemical analysis, Second KS ISO 5682-2:20 17 Kenya Standard - Equipment for crop Edition protection - Spraying equipment Part 2: Test methods to assess the horizontal KS EAS 148-3:2017 Kenya Standard - Cement - Test transverse distribution for hydraulic methods Part 3: Determination of setting sprayers, First Edition times and soundness, Second Edition KS ISO 5682-3:20 17 Kenya Standard - Equipment for crop KS EAS 148-4:2017 Kenya Standard - Cement - Test protection - Spraying equipment Part 3: Methods Part 4: Quantitative determination Test method to assess the performance of of constituents, Second Edition volume/area adjustment systems, First Edition KS EAS 148-5:2017 Kenya Standard - Cement - Test methods Part 5: Pozzolanicity test for KS ISO 16122 -1:2015 Kenya Standard - Agricultural and pozzolanic cements, Second Edition forestry machinery - Inspection of sprayers in use Part 1: General, First KS EAS 148-6:20 17 Kenya Standard - Cement - Test Edition methods Part 6: Determination of fineness, Second Edition KS ISO 16122-2:2015 Kenya Standard - Agricultural and forestry machinery - Inspection of KS EAS 148-7:20 17 Kenya Standard - Cement - Test sprayers in use Part 2: Horizontal boom methods Part 7: Methods of taking and sprayers, First Edition preparing samples, Second Edition KS ISO 16122-3:2015 Kenya Standard - Agricultural and KS EAS 148-8:2017 Kenya Standard - Cement - Test forestry machinery - Inspection of methods Part 8: Heat of hydration - sprayers in use Part 3: Sprayers for bush Solution method, Second Edition and tree crops, First Edition KS 1555-1:2018 Kenya Standard - Gully tops and manhole KS ISO 16122-4:20 15 Kenya Standard - Agricultural and tops for vehicular and pedestrian areas - forestry machines - Inspection of sprayers Specification Part 1: Definitions, in use Part 4: Fixed and semi-mobile classification, general principles of design, sprayers, First Edition performance requirements and test methods, First Edition KS ISO 24253-1 :20.15 Kenya Standard - Crop protection equipment - Spray deposition test for field KS 1555-2:20 18 Kenya Standard - Gully tops and manhole crop Part 1: Measurement in a horizontal tops for vehicular and pedestrian areas - plane, First Edition Specification Part 2: Gully tops and manhole tops made of cast iron, First KS ISO24253-2:2015 Kenya Standard - Crop protection Edition equipment - Spray deposition test for field crop Part 2: Measurement in a crop, First KS 1555-3:20 18 Kenya Standard - Gully tops and manhole Edition tops for vehicular and pedestrian areas - Specification Part 3: Gully tops and KS ISO 7749-1:1995 Kenya Standard - Agricultural irrigation manhole tops made of steel or aluminium equipment - Rotating spriniders Part 1: alloys, First Edition Design and operational requirements, First Edition KS 1555-4:2018 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - KS ISOl3847:2013 Kenya Standard - Petroleum and natural Specification Part 4: Gully tops and 17,as industries - Pipeline transportation manhole tops made of steel reinforced systems - Welding of pipelines, First concrete, First Edition &lition KS 1555-5:20 18 Kenya Standard - Gully tops and manhole KS ISO 671:1982 Keiiya Standard - Steel and cast iron - tops for vehicular and pedesthan areas - Detirmination of sulphur content - Specification Part 5: Gully tops and Cons bustion Utrimetric method, First manhole tops made of composite materials, Editicn First Edition KS ISO 7500-1:2018 Kenya Standard - Metallic materials - KS 1555-6:2018 Kenya Standard - Gully tops and manhole Calibra tion and verification of static tops for vehicular and pedestrian areas - uniaxiinl testing machines Part 1: Specification Part 6: Gully tops and Tensioafcompression testing machines - manhole tops made of polypropylene (PP), Calibrattion and verification of the force- polyethylene (PE) or unplasticized poly measur, ing system, First Edition (vinyl chloride) (PVC-U) ,First Edition KS ISO 7500-2:2008 Kenya Standard - Metallic materials - Verifièa tion of static uniaxial testing KS ISO 10426-2:2003 Kenya Standard - Petroleum and natural machines Part 2: Tension creep testing gas industries - Cements and materials for machinn s - Verification of the applied well cementing Part 2: Testing of well force, Fir rst Edition cements, First Edition KS ISO 10426-3:2003 KSISO 10714I992 Kenya Standard - Steel and iron - Kenya Standard - Petroleum and natural Drtermin ation of phosphorus content - gas industries - Cements and materials for Phosphov; anadomolybdate well cementing Part 3: Testing of deep Spectrophi tometric method, First Edition water well cement formulations, First Edition

2944 THE KENYA GAZETTE -- 17th August, 2018

KS ISO 10426-4:2004 Kenya Standard - Petroleum and natural KNWA 2800:2018 Kenya Standard - Handling, storage anti gas industries - Cements and materials for transportation of LPG in .IMO type 5 ISo well cementing Part 4: Preparation and tanks - Code of practice, First Edition testing of foamed cement slurries at atmospheric pressure, First Edition KNWA 2822:2018 Kenya Standard - Tractors and machiner for agriculture and forestry - Lovj KS ISO 10426-5:2004 Kenya Standard - Petroleum and natural horsepower tractors - Specification, First gas industries - Cements and materials for Edition well cementing Part 5: Determination of shrinkage and expansion of well cement Trade Affairs formulations at atmospheric pressure, First KS EAS 64:2017 Kenya Standard - Groundnut (peanut) oil Edition for cosmetic industry - Specification, KS ISO 10426-6:2008 Kenya Standard - Petroleum and natural Second Edition gas industries - Cements and materials for well cementing Part 6: Methods for KS EAS 65:2017 Kenya Standard - Coconut oil for determining the static gel strength of cosmetic industry - Specification, First cement formulations, First Edition Edition KS ISO 2301:1973 Kenya Standard - Sawn timber of KS EAS 86:2017 Kenya Standard - Sesame (simsim) oil for broadleaved species - Defects - cosmetic industry - Specification, Second Measurement, First Edition Edition

KS ISO 13061-10:2017 Kenya Standard - Physical and mechanical KS EAS 425-1:2017 Kenya Standard - Skin powder, - properties of wood - Test methods for Specification Part 1: Body and face powder, small clear wood specimens Part 10: First Edition Determination of impact bending strength, KS EAS 425-2:2017 Kenya Standard - Skin powders - First Edition Specification Part 2: Baby powder, First KS ISO 13061-11:2017 Kenya Standard - Physical and mechanical Edition properties of wood - Test methods for small clear wood specimens Part 11: KS EAS 835-1:2017 Kenya Standard - Bath preparations Part Determination of resistance to impact 1: Synthetic detergent-based foam baths and indentation, First Edition shower gels - Specification, First Edition KS ISO 13061-12:2017 Kenya Standard - Physical and mechanical KS EAS 837:2017 Kenya Standard - Avocado oil for properties of wood - Test methods for cosmetic industry - Specification, First small clear wood specimens Part 12: Edition Determination of Static hardness, First KS EAS 840:2017 Kenya Standard - Shaving cream - Edition Specification, First Edition

KS ISO 13061-13:2016 Kenya Standard - Physical and mechanical KS EAS 841:2017 Kenya Standard - Hair oils - properties of wood - Test methods for Specification, First Edition small clear wood specimens Part 13:

Determination of radial and tangential KS EAS 842-1:2017 Kenya Standard - Hair shampoo Part 1:

shrinkage, First Edition Soap based - Specific:ation, First Edition

- KS ISO 13061-14:2016 Kenya Standard Physical and mechanical KS EAS 844:2017 Kenya Standard - Aryl di-amine-based - properties of wood Test methods for liquid oxidation hair (Jyes - Specification, small clear wood specimens Part 14: First Edition Determination of volumetric shrinkage, First Edition KS EAS 845:2017 Kenya Standard - Cosmetic pencils - Specification, First Edition KS ISO 13061-15:2017 Kenya Standard - Physical and mechanical

properties of wood - Test methods for KS EAS 846:2017 Kenya Standard -- Glossary of terms small clear wood specimens Part 15: relating to the cosmetic industry, First Determination of radial and tangential Edition swelling, First Edition Food and Agricuture KS ISO 13061-16:2017 Kenya Standard - Physical and mechanical Kenya Standar1 - properties of wood - Test methods for KS 2765:2018 Monitoring and small clear wood specimens Part 16: sampling of fortified foods - Guidelines, Determination of volumetric swelling, First First Edition Edition KS 2775:20 18 Kenya Standard - Labeling of KS ISO 13061-17:2017 Kenya Standard - Physical and mechanical complementasy foods and designated properties of wood - Test methods for products - Requirements, First Edition small clear wood specimens Part 17: Determination of ultimate stress in KS 317-4:2018 Kenya Standard - Carcasses and meat cuts compression parallel to grain, First Edition - Specification Part 4: Camel, First Edition

KS ISO 7165:2017 Kenya Standard - Fire-fighting - KS 2761:2018 Kenya Standard - Meat hygiene - Code Portable fire extinguishers, Second Edition of practice, First Edition

KS ISO 11601:2017 Kenya Standard - Fire-fighting - KS 2762:2018 Kenya Standard - Offal - Specification, Wheeled fire extinguishers, Second Edition First Edition

KS ISO/TS 11602-1:2010 Kenya Standard - Fire protection - KS 2773:2018 Kenya Standard - Livestock markets - Portable and wheeled fire extinguishers Part Specification, First Edition Selection and installation, Second Edition KS 2774-1:2018 Kenya Standard - Grading live animal for KS ISO/TS meat trade - Specification Part 1: Cattle, First Edition 11602-2:2010 Kenya Standard - Fire protection - Portable and wheeled fire extinguishers Part KS 2774-2:20 18 Kenya Standard - Grading live animal for Inspection and maintenance, Second meat trade - Specification Part 2: Goat, Edition First Edition 17th August, 2018 THE KENYA GAZETTE 2945

KS 2774-3:2018 Kenya Standard - Grading live animal for KS ISO 15360-1:2000 Kenya Standard - Recycled pulps - meat trade - Specification Part 3: Sheep, Estimation of stickies and Plastics Part 1: First Edition Visual method.

KS 2774-4:2018 Kenya Standard - Grading live animal for KS ISO 23713:2005 Kenya Standard - Pulps - Determination

meat trade - Specification Part 4: Camel, of fibre coarseness by automated optical First Edition analysis - Polarized light method

Kenya Standard - Processed wnting paper KNWA 28 16:2018 Kenya Standard - Feed grade yeast KS ISO 353:1975 and certain classes of printed matter - products - Specification, First Edition Method of expression of dimensions. KS 2430:2018 Kenya Standard - Ginger paste - Specification, Second Edition KS 235 1:2012 Kenya Standard - Surgical spirit - Specification KS 243 1:2018 Kenya Standard - Garlic paste - Specification, Second Edition KS 924:2012 Kenya Standard - Specification for motor vehicle chevrons, decals and strips

KS 2432:20 18 Kenya Standard - Garam masala - Specification, Second Edition KS 2350:2012 Kenya Standard - Sodium silicate - Specification

KS 2131:2018 Kenya Standard - Tamarind paste - - Hydrochloric acid - Specification, Second Edition KS 87:20 12 Kenya Standard Specification

KS 150 927:2009 Kenya Standard - Spices and KS 1180:2012 Kenya Standard - Ethyl methyl condiments - Determination of extraneous ketone(butanone for industrial use) - matter and foreign matter content, First Specification Edition

KS 1075-3:1991 Kenya Standard - Glossary of terms KS 2782:2018 Kenya Standard - In shell pistachio nuts relating to fishing nets Part 3: Description - Specification, First Edition and designation of knotted netting

KS 1284:2018 Kenya Standard - Substitute vinegar - KS 1076:1998 Kenya Standard - Specification for fishing Specification, Third Edition nets

Services KS 1129-2:1992 Kenya Standard - Test methods for fishing KS ISO 5127:2017 Kenya Standard Information and nets Part 2: Determination of breaking load documentation - Foundation and of knot and netting yarn vocabulary, Second Edition KS 1129-3:1995 Kenya Standard —Test methods for fishing nets Part 3: Determination of elongation of KS ISO 11799:2015 Kenya Standard - Information and netting yarns documentation - Document storage

requirements for archive and library KS 1129-5:1997 Kenya Standard - Test methods for fishing materials, Second Edition nets Part 5: Determination of mesh breaking load of netting KS ISO 15489-1:2016 Kenya Standard - Information and documentation - Records management KS 1630-1:2002 Kenya Standard - Methods of test f-r Part 1: Concepts and principles, Second knitted fabrics Part 1: Method for Edition determination of dimensions and dimensional stability of knitted fabrics KS ISO 17316:2015 Kenya Standard - Information and documentation - International standard KS 207-2:1996 Kenya Standard - Glossary of textile terms link identifier (ISLI) ,First Edition pertaining to defects in fabrics Part 2: Knitted fabrics KS ISO 18461:2016 Kenya Standard - International museum statistics, First Edition KS 438:1985 Kenya Standard - Method for determination of pilling resistance of fabrics KS ISO 17680:20 15 Kenya Standard - Tourism and related (brush pilling tester) services - Thelassotherapy - Service requirements, First Edition KS 493:1983 Kenya Standard - Specification for knitted nylon fabric KS ISO 20712-3:2014 Kenya Standard - Water safety signs and beach safety flags Part 3: Guidance for use, KS 494:1983 Kenya Standard - Specification for Second Edition knitted vests KS 495:1983 Kenya Standard - Specification for gent's EAC/COMESA knitted briefs

KS 2756:2018 Kenya Standard - Packaged flavored KS 525:1984 Kenya Standard - Specification for ladies drinking water - Specification, First knitted briefs Edition KS 632:1988 Methods for determination of dimensional The following standards are hereby confirmed changes of knitted products containing wool KS ISO 618: 1974 Kenya Standard - Paper - Articles of KS 78 1-1:1988 Kenya Standard - Specification for cones stationery that include detachable sheets - Part 1: Paper cones Overall trimmed sizes KS 781-2:1989 Kenya Standard - Specification for cones KS 811:2013 Kenya Standard - Silk (sheen) emulsion Part 2: Plastic cones paints for interior and exterior use - Specification KS ISO 13938-1:1999 Textiles - Bursting properties of fabrics Part 1: Hydraulic method for determination KS ISO 22414:2004 Kenya Standard - Paper - Cut-size office of bursting strength and bursting distension paper - Measurement of edge quality KS ISO 13938-2:1999 Kenya Standard - Textiles - Bursting KS ISO 15318:1999 Kenya Standard - Pulp, paper and board properties of fabrics Part 2: Pneumatic - Determination of 7 specified method for determination of bursting polychiorinated biphenyls (PCB) strength and bursting distension 2946 THE KENYA GAZETTE 17th. August, 2018.

KS ISO 23606:2009 Kenya Standard - Textiles Knitted fabrics KS 1989:2006 Kenya Standard - Cabinet X-ray - Representation and pattern design equipment for examination of letters packages, baggage, freight.and other articles KS 1113-1:1993 Kenya Standard - Specification for spun yarns Part 1: Cotton yarns for security, quality control and other purposes - Requirements KS 1113-3:1993 Kenya Staisdard - Specification for spun KS 1990:2007 - yarns Part 3: Polyester / CcJlulosic blended Kenya Standard Safe use of ionizing yarns radiation in training institutions - Codeof practice KS 1113-4:1996 Kenya Standard - Specification for staple spun yarns Part 4: Polyester/wool blended KS 2032:2007 Kenya Standard - Near-surface disposal yarns radioactive waste - Code of practice KS 2029:2007 KS 1120:1992 Kenya Standard - Specification for Kenya Standard - Corpses containing doubling and twisting bobbins radioactive materials - Safe handling - Code of practice KS 1128:1995 Kenya Standard - Specification for wicks for non-pressure stoves KS.2030:2007 Kenya Standard - Discharge of patients undergoing treatment with radioactive KS 1233:1992 Kenya Standard - Specification for substances - Code of practice spinning doubling and twisting rings KS 1953:2007 Kenya Standard - Healthcare practitioners KS 529:1984 - Kenya Standard Specification for elastic exposed to ionizing radiation - Code of flat braid practice. KS 665:1998 Kenya Standard - Specification for textile KS 1954:2007 Kenya Standard - Medical research - labels Administration of ionizing radiation to human subjccts - KS 933:1990 Kenya Standard - Specification for tubes Requirements (bobbins) for ring spinning KS. ISO 19105:2000 Kenya Standard - Geographic information - KS 588: 1999 Kenya Standard - Specification for PVC Conformance andtesting slippers KS IS01 19106:2001 Kenya Standard. - Geographic information KS LEC 60514:1975 Kenya Standard - Acceptance inspection - Profiles of class 2 alternating-current watthour KS ISO 19107:2003. - meters. Kenya, Standard Geographic information - Spatial schema. KS EAS 388-2:2005 Kenya Standard -- High-voltage fuses Part KS.ISO 19108:2002 Kenya Standard - 2: Expulsion fuses Geographic information —Temporal schema KS 1187:1993 Kenya Standard - Specification for metallic clips for electrical wiring KS ISO 19.11:2003 Kenya Standard - Geographic information - Spatial, referencing by geographic KS 311-1:1987 Kenya Standard - Specification for identifiers miniature circuit breakers (MCIIs) KS ISO 19116:2004 Kenya Standard. - Geographic information KS IEC 61643-1:2002 Kenya Standard - Surge protective devices - Positioning services connected to low-voltage power distribution systems Part I: Performance requirements KS ISO/IEC and testing methods 15457-1:2008. Kenya Standard - laformation technology - Identification cards - Thin flexible KS 1827:2007 Kenya Standard - Voltage characteristics cards; part 1: Physical'characteristics of electricity supplied by public distribution systems KS ISOJIEC 15457-2:2007 Kenya Standard - InformatIon technology KS 311-1:1987 Kenya Standard - Specification for - Identification cards - Thin flexible miniature circuit breakers (MCBs) cards. art 2: Magnetic recording technique

KS ISO 361:1975 Kenya Standard - Basic ionizing radiation' KS ISO/IEC symbol 15457-3:2002 Kenya Standard - Information technology - Identification cards - Thin flexible KS ISO 14152:2001 Kenya Standard - Neutron radiation cards Part 3: Test methods protection shielding - Design principles and considerations for the choice of KS LSO/JEC appropriate materials 15693- 120 10. Kenya Standard. - Information technology - Identification cards- KS ISO 14146:2000 Kenya Standard - Radiation protection - Contactless Criteria and performance limits for the integrated circuit cards - Vicinity Cards periodic evaluation of processors of Part 1: Physical characteristics personal dosemeters for X and gamma KS ISOIIEC radiation 15693-2:2006 Kenya Standard - Information technology KS ISO 8194:1987 Kenya Standard - Radiation protection, - - identification cards - Contactless Clothing for protection against radioactive integrated circuit cards - Vicinity Cards contamination - Design, selection, testing Part 2: Air interface and initialization and use KS ISO/IEC KS OIML R 119:1996 Kenya Standard - Pipe provers for testing 15693-3:2009 Kenya Standard - Information technology measuring systems for liquids other than - identification cards - Contactless water integrated circuit cards - Vicinity cards Part 3: Anti-collision and transmission KS 1950:2007 Kenya Standard - X-ray analysis protocol equipment - Protection against ionizing radiation - Code of practice KS ISO/IEC 19794-1:2006 Kenya Standard - jnformation technology KS 1988:2007 Kenya Standard - Safe use of radiation Biometric Data Interchange Formats Part gauges - Code of practice 1: Framework 17th August,2018 THE KENYA GAZETTE 2947

KS'ISOIIEC KS 1SO,'IEC 19794-2:2005 Kenya Standard - Information technology 19795- :2006 Kenya Standard - Information - Biometric Data Interchange Formats Part technology.— Biometric performance Finger minutiae data testing and reporting Part 1: Principles and framework KSISO/TEC

19794-3:2006 Kenya Standard - Information technology KS ISO/EEC - Biometric Data Interchange Formats Part 19795-2:2007 Kenya Standard - Information Finger pattern spectral data technology-- Biometric performance KS ISO/IEC testing and reporting Part 2: Testing methodologies for technology and scenario 11693-2: 2009 Kenya Standard - information technology —ldetification cards, Optical memory evaluation cards Part 2: Co-existence of optical KS lSO/IEC memory with Other machine readable 19795-3:2007 Kenya Standard - Information technology technologies Biometric performance testing and reporting Part 3: Modality-specific testing KS ISO/IEC 11694-4: 2008 Kenya Standard - Information technology Identification cards, Optical KS ISOIFC memory cards - Linear recording method 9795-4:2098 Kenya Standard - Information Pah-4. Logicat data Structures echnology -- Biometric performance KS ISO IEC testing and reporting Part 4: Interoperability

11695-3:2008 KenyaStandard - information teciinology perfc smance testing

- Identification cards, Optical memory KS ISO/EEC cards - Holographic recording method Part 9795-5:2011 Kenya 3: Optical properties and characteristics Standard - Information technology-- Biometric performance KS ISO/IEC testing and reporting Part 5: Access control

10373-1: 2006 Kenya Standard - Identifjeation card:, scenario and grading scheme Test methods Part 1: General characteristics KS ISO/IEC KSISOIIEC 19795-6:2012 Kenya Standard - Information

10373-2: 2006 'Kenya Standard - Identification cards - technology - Biometric performance Test methods Part 2: Cards with magnetic testing and reporting Part 6: Testing stripes methodologies for operational evaluation

KS ISO/IEC KS ISO/JEC 10373-3: 2010 Kenya Standard - Identification cards - 19795-7:2011 Kenya Standard - Information Test methods Part 3: integrated circuit cards technology— Biometric performance testing and reporting Part 7: Testing of on- KS ISO/IEC card biometric comparison algorithms 10373-7: 2008 Kenya Standard - Identification cards - Test methods Part 7: Vicinity cards KS ISO fEC 11770-1:2010 Information technology - Security KS ISO/LEC techniqties - Key management Part 1: 10373-8:2011 Kenya Standard - Identification cards - Test methods Part 8: USB4CC Framework KS ISO/fEC KS ISO 2560:2009 Kenya Standard - Welding consumables - Covered electrodes for manual metal are 10373-9: 2011 •Kenya Standard - Identification cards - Test methods Part 9: Optical memory cards welding of non-alloy and fine grain steels -- Classification - Holographic recording method KS ISO/fEC KS 1512:2005 Kenya Standard - Steel, carbon and high- strength, low-alloy hot-rolled sheet and 19784-1:2006 Kenya Standard - Information technology —Biometric Application Programming cold-rolled sheet - General requirements Interface Part 1: BioAPI specification KS 1513:2005 Kenya Standard - Steel sheet and strip, KS ISO/fEC heavy thickness coils, carbon, hot-rolled - Specification 19784-2: 2007 Kenya Standard - Information technology Biometric Application Programming KS 7 1-2:1989 Kenya Standard - Method for rockwell Interface Part 2: Biometric archive function hardness test (Scales M, L, R) 'provider interface KS EAS 441:2007 Kenya Standard - Agricultural tractor KS ISO/fEC drive wheel tyres— Method of measuring 19785-2:2006 Kenya Standard - Information technology tyre rolling circumference - Common Biometric Exchange• Formats Framework Part 2: Procedures for the KSEAS 188:1997 Kenya Standard - Machetes - operation of the Biometric Registration Specification Authority KS 151:2006 Kenya Standard - Panga - Specification KS ISO/TEC 24708:'2008 Kenya Standard - Information technology - Biometrics - BioAPI Interworking KS ISO/TS 28923:20 12 Kenya Standard - Agricultural machinery protocol - Guards for moving parts of power transmission - Guard opening with tool KS ISO/fEC 24713-1:2008 Biometric profiles for inter-operability KS ISO 4254-12: 2012 Kenya Standard - Agricultural Machinery &data interchange Part I: Overview of - Safety Part 12: Rotary disc and drum biometric systems and biometric profiles mowers and flail mowers KS ISO /EC KS ISO 4254-13:2012 Kenya Standard - Agricultural machinery 247 13-2: 2008 Kenya Standard - Biometric profiles for - Safety Part 13: Large rotary mowers interoperability &data interchange Part 2: Physical access control for employees at KS EAS 360:2004 Kenya Standard - Pneumatic tyres for airports agriculture implements 2948 THE KENYA GAZETTE 17th August, 2018

KS EAS 132:1999 Kenya Standard - Hoes (jembes) - Both KS ISO 6673:2003 Kenya Standard - Green coffee - plain and forked - Specification. Determination of loss in mass at 105 degrees cilisious KS 154:2000 Kenya Standard - Specification for both plain and fork hoes KS ISO 1446:2001 Kenya Standard - Green coffee- Determination of water content - Basic KS 1763:2002 Kenya Standard. - Transport quality reference system - Road, rail and inland navigation transport - Quality system requirements to KS ISO 24114: 2011 Kenya Standard - Instant coffee - supplement KS ISO 9002 for the transport Criteria for authenticity of dangerous goods with regard to safety KS ISO 11292-1995 Kenya Standard - Instant coffee -

KS 2130:2008 Kenya Standard - Grout for jointing Determination of free and total marble, granite, ceramic and porcelain tiles carbohydrate contents - Method using

- Cement-based - Specification high performance anion exchange chromatography KS 1002:2012 Kenya Standard - Anti-termite measures

in buildings - Pre-construction chemical KS ISO 8460:1987 Kenya Standard - Instant coffee - treatment measures Determination of free flow and compacted bulk densities. KS 1003:2012 Kenya Standard - Anti-termite measures in buildings - Treatment for existing KSISO4O72:1982. Kenya Standard - Instant coffee - buildings Determination of loss in mass at 70 degrees cilisious under reduced pressure KS 2308:2012 Kenya Standard - Specification for soup stock medium(beef) KS ISO 3726:1983 Kenya Standard - Instant coffee - Determination of loss in mass at 70 under KS 2310: 2012 Kenya Standard - Specification for edible reduced pressure. meat co-products KS ISO 6670:2002 Kenya Standard - Instant coffee - KS EAS 782:2012 Kenya Standard - Composite flour - Sampling method for bulk units with liners. Specification KS LAS 105:2008 Kenya Standard - Roasted coffee beans KS EAS 778:2012 Kenya Standard - Fresh bitter cassava - and roasted ground coffee - Specification Specification KS ISO 11817:1994 Kenya Standard - Roasted ground coffee KS EAS 780:2012 Kenya Standard - Fresh cassava leaves - - Determination of moisture content - Specification Karl Fischer method (Reference method)

KS EAS 771:2012 Kenya Standard - Fresh sweet potatoes - KS ISO 11294:1994 Kenya Standard - Roasted ground coffee Specification - Determination of moisture content - Method by determination of loss in mass at KS EAS 776:2012 Kenya Standard - Production and handling 103 (Routine method) of fresh cassava - Code of practice

KS ISO 20712-2:2007 Kenya Standard - Water safety signs and KS EAS 775:2012 Kenya Standard - Production and handling beach safety flags Part: Specifications for of fresh ware potatoes - Code of practice beach safety flags - Colour, shape,

KS EAS 777:2012 Kenya Standard - Reduction of meaning and performance

acrylamide in potato products - Code of practice The following standards are hereby withdrawn forthwith;

KS 667:2013 Kenya Standard - Water-thinned priming KS EAS 779:2012 Kenya Standard - High quality cassava paints for wood - Specification flour - Specification

KS 811:2013 Kenya Standard - Silk (sheen) emulsion KS 1928:2006 Kenya Standard - Guidelines for production, processing and labelling of paints for interior and exterior use - organically produced foods Specification

KS 813:2013 Kenya Standard - Matt solvent-borne KS 2225:2012 Kenya Standard - Genetically modified paints for interior and exterior use - organisms and derived products - Labelling of food and feed Specification KS ISO KS 812:2012 Kenya Standard - Matt emulsion paints for interior and exterior use - Specification

24276:2006/AMD1 Kenya Standard - Foodstuffs - Methods of analysis for the detection of genetically KS 1276:2012 Kenya Standard - Air-dried roofing paints modified organisms and derived products - Specification

- General requirements and definitions KS 1027-1:2012 Kenya Standard - Auto refinishing paints Amendment I - Specification Part I: Synthetic resin based KS ISO 20481:2008 Kenya Standard - Coffee and coffee products - Determination of the caffeine KS 1027-2:2012 Kenya Standard - Auto refinishing paints content using high performance liquid - Specification Part 2: Nitrocellulose resin chromatography (HPLC) - Reference based method KS 1718:2003 Kenya Standard - Thinner for KS ISO 6669:1995 Kenya Standard - Green and roasted nitrocellulose resin-based paints and coffee - Determination of free flow - lacquers - Specification Flow bulk density of whole beans (Routine

Method) KS 1717:2003 Kenya Standard - Thinner for synthetic

resin-based auto-refinishing paints - KS EAS 130:1999 Kenya Standard - Green coffee bean - Specification Specification

KS 1716:2012 Kenya Standard - 2-Pack acrylic resin- KS ISO 10470:2004 Kenya Standard - Green coffee - Defect based auto-refinishing paint - reference chart Specification. 17th August, 2018 --- THE KENYA GAZETTE 2949

KS 1719:2003 Kenya Standard - Thinner for acrylic resin KS IEC 61557-4:1997 Kenya Standard - Electrical safety in low based auto-refinishing paint - voltage distribution systems up to 1 000 V Specification ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS ISO 15360-1:2000 Kenya Standard - Recycled pulps - Estimation of Stickies and Plastics Part 1: protective measures Part 4: Resistance of Visual method. Replaced by KS ISO 15360- earth connection and equipotential bonding 1:20 11 to be replaced by KS IEC 61557-4:2007 KS IEC 61557-5:1997 KS ISO 15360-2: 2001 Kenya Standard - Recycled pulps - Kenya Standard - Electrical safety in low Estimation of Stickies and Plastics Part 2: voltage distribution systems up to 1 000 V Image analysis method. / Paper and Paper ac. and 1 500 V d.c. - Equipment for Products Replaced by KS ISO 15360- testing, measuring or monitoring of 2:20 15 protective measures Part 5: Resistance to earth to be replaced by KS IEC 6 1557- KS ISO 16065-1:2001 Kenya Standard - Pulps - Determination 5:2007 of fibre length by automated optical analysis - Part 1: Polarized light method. I KS IEC 61557-6:1997 Kenya Standard - Kenya Standard - Paper and paper product. Replaced by KS Electrical safety in low voltage distribution ISO 16065-1:2014 systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or KS ISO 8784-1:2005 Kenya Standard - Pulp, paper and board monitoring of protective measures Part 6: - Microbiological examination Part 1: Effectiveness of residual current devices Total count of bacteria, yeast and mould (RCD) in TI', TN and IT systems (first based on disintegration. / Paper and Paper Edition) to be replaced by KS LEC 61557- Products. Replaced by KS ISO 8784:2014. 6: 2007 KS ISO 5270:1998 Kenya Standard —Puips - Laboratory KS IEC 61557-7:1997 Kenya Standard - Electrical safety in low sheets - Determination of physical voltage distribution systems up to 1 000 V properties Replaced by KS ISO 5770:2012 a.c. and 1 500 V d.c. - Equipment for KS 2157-1:2009 Kenya Standard - Hot applied testing, measuring or monitoring of thermoplastic road marking paint - protective measures Part 7: Phase sequence Specification Part 1: Constituent material to be replaced by KS IEC 61557-7:2007 and mixtures, To be replaced by KS 2157- KS IEC 61557-8:1997 Kenya Standard - Electrical safety in low 1:2018 voltage distribution systems up to 1 000 V KS 2157-2:2009 . Kenya Standard - Hot applied a.c. and 1 500 V d.c. - Equipment for Thermoplastic Road Marking paint - testing, measuring or monitoring of Specification Part 2: Specification for road protective measures Part 8: Insulation performance, To be replaced by KS 2157- monitoring devices for IT systems to be 2:2018 replaced by KS IEC 6 1557-8:2007

KS 421:2010 Kenya Standard - Newsprint - KS IEC 61557-9:1997 Kenya Standard - Electrical safety in low Specification, To be replaced by KS voltage distribution systems up to 1 000 V 42 1;20 18 ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of KS 921:1991 Kenya Standard - Specification for kraft protective measures Part 9: Equipment for liner, To be replaced by KS 921:2018 insulation fault location in IT systems to be replaced by KS IEC 61557-9:2007 KS EAS 255-4:2009 Kenya Standard - Textiles - Quantitative chemical analysis Part 4: Mixtures of KS IEC 61557-10 :1997 Kenya Standard - Kenya Standard - Certain proteins and certain other fibres - To Electrical safety in low voltage distribution be replaced by KS ISO 1833-4:2017 systems up to 1 000 V ac. and 1 500 V d.c. KS EAS 255-7:2009 Kenya Standard - Textiles - Quantitative - Equipment for testing, measuring or chemical analysis Part 7: Mixture of monitoring of protective measures Part 10: polyamide and Certain other fibres, To be Combined measuring equipment for testing, replaced by KS ISO 1833-7:20 17 measuring or monitoring of protective measures to be replaced by KS IEC 61557- KS EAS 255-11:2009 Kenya Standard - Textiles - Quantitative 10:2007 chemical analysis Part 11: Mixtures of certain cellulose fibres and certain other KS ISO 4190-1:1999 Kenya Standard - Lift (Elevator) fibres - To be replaced by KS ISO 1833- installation -- Part 1: Class I, II, III and VI 11:2017 lifts to be replaced by KS ISO 4190-1:2010

KS IEC 61557-1:1997 Kenya Standard - Electrical safety in low KS ISO 4190-5:1987 Kenya Standard - Lift (Elevator) voltage distribution systems up to 1 000 V installation Part 5: Control devices, signals a.c. and 1 500 V d.c. - Equipment for and additional fittings to be replaced by KS testing, measuring or monitoring of ISO 4190-1:2006 protective measures Part 1: General requirements to be replaced by KS IEC KS IEC 62209-1:2005 Kenya Standard - Human exposure to 61557-1:2007 radio frequency fields from hand-held and body-mounted wireless communication KS IEC 61557-2:1997 Kenya Standard - Electrical safety in low devices - Human models, instrumentation, voltage distribution systems up to 1 000 V and procedures Part 1: Procedure to a.c. and 1 500 V d.c. - Equipment for determine the specific absorption rate testing, measuring or monitoring of (SAR) for hand-held devices used in close protective measures Part 2: Insulation proximity to the ear (frequency range of 300 resistance to be replaced by KS IEC 61557- MHz to 3 GHz) to be replaced by KS IEC 2:2007 62209- 1:2016 KS IEC 61557-3:1997 Kenya Standard - Electrical safety in low KS OIML R 117:1995 Kenya Standard - Measuring systems for voltage distribution systems up to 1 000 V liquids other than water to be replaced by a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of (a) KS OIML R 117-1: 2007 protective measures Part 3: Loop impedance (1,) KSOIMLR 117-2: 2014 to be replaced by KS IEC 61557-3:2007 (c) KSOIMLR 117-3: 2014 2950 THE KENYA GAZETFE 17th August, 2018

KS ISO 7503-1:1988 Kenya Standard - Evaluation of surface KS ISO/IEC 9995-2:1994 Kenya Standard - Information technology contamination Part 1: Beta-emitters - Keyboard layouts for text and office (maximum beta energy greater than 0,15 systems Part 2: Alphanumeric section. I MeV) and alpha-emitters to be replaced by Office Equipment, To be replaced by KS KS ISO 7503-1:2016 ISO/IEC 9995-2:2009 KS ISO 7503-2:1988 Kenya Standard - Evaluation of surface KS ISO/IEC contamination Part 2: Tritium surface 9995-3:1994 Information technology - Keyboard contamination to be replaced by KS ISO layouts for text and office systems Part 3: 7503-2:2016 Complementary layouts of the alphanumeric zone of the alphanumeric KS ISO 7503-3:1996 Kenya Standard - Evaluation of surface section. I Office Equipment, to be replaced contamination Part 3: Isomeric transition byKS ISO/IEC 9995-3:2010 and electron capture emitters, low energy beta-emitters (Ex < 0,15 MeV) to be KS ISO/LEC 9995-4:1994 Kenya Standard - Information technology replaced by KS ISO 7503-3:2016 - Keyboard layouts for text and office systems Part 4: Numeric section. / Office KS ISO 9712:1992 Kenya Standard - Non-destructive testing Equipment, To be replaced by KS ISO/IEC - Qualification and certification personnel 9995-4:2009 to be replaced by KS ISO 97 12:2012 KS ISO/IEC 9995-5:1994 Kenya Standard - Information technology KS ISO 12790-1:2001 Kenya Standard - Radiation protection - - Keyboard layouts for text and office Performance criteria for radiobioassay Part systems Part 5: Editing section. / Office 1: General principles to be replaced by KS Equipment, To be replaced by KS ISO/IEC ISO 28218:2010 9995-5:2009 KS ISO 19101:2002 Kenya Standard - Geographic information KS ISO/IEC 9995-7:2002 Kenya Standard - Information technology - Reference model, to be replaced by KS - Keyboard layouts for text and office ISO 19101-1:2014 and ISO 19101-2:2008 systems Part 7: Symbols used to represent functions. / Office Equipment, To be Kenya Standard - Geographic information KS 150 19109:2005 replaced by KS ISOIIEC 9995-7:2009 - Rules for application schema to be Treplaced by KS ISO 19109:2015 KS ISO/IEC 9995-8:1994 Kenya Standard - Information technology - Keyboard layouts for text and office - Geographic information KS ISO 19110:2005 Kenya Standard systems Part 8: Allocation of letters to the - Methodology for feature cataloguing, to be replaced by KS ISO 19110:2016 keys of a numeric keypad. / Office Equipment, To be replaced by KS ISO/IEC KS ISO 19111:2003 Kenya Standard - Geographic information 9995-8:2009 - Geographic information - Spatial referencing by coordinates, to be replaced KS 205: 1979 Kenya Standard - Specification for retreaded car and commercial vehicle tyres, byKS ISO 19111:2007 and KSISO 19111- Equivalent to KS EAS 53:2000 2 :2009 KS EAS 433-1:2007 Kenya Standard - Tyres, valves and tubes KS ISO 19113:2002 Kenya Standard - Geographic information - List of equivalent terms Part 1: Tyres, - Quality principles to be replaced by KS ISO 19157 Equivalent to KS ISO 3877-1:1997 KS EAS 433-2:2007 Kenya Standard - Tyres, valves and tubes KS ISO 19114:2003 Kenya Staadard - Geographic information - List of equivalent terms Part 2: Tyre - Quality evaluation procedures to be replaced by ISO 19157 valves. Equivalent to KS ISO 3877-2:1997. KS EAS 433-3:2007 Kenya Standard - Tyres, valves and tubes KS ISO 19115:2003 Kenya Standard .- Geographic information - List of equivalent terms Part 3: Tubes, - Metadata to be replaced by KS ISO 191 15-1:2014, KS ISO 19115-2:2009 and Equivalent to KS ISO 3877-3:1978 KS ISO 19115-3:2016 KSEAS 433-4:2007 Kenya Standard - Tyres, valves and tubes - List of equivalent terms Part 4: Solid 101 Ill-I: Standard - Information KS ISO,'IEC 2000 Kenya tyres, Equivalent to KS ISO 3877-4:1984 technology - Security techniques - Hash- functions Part 1: General, To be replaced by KS EAS 439-1:2007 Kenya Standard - Tyres and rims (metric KS ISO/lEG 10118-1:2006 series) for agricultural tractors and machines Part 1: Tyre designation, KS ISO/IEC 24759:2014 Kenya Standard - Kenya Standard - dimensions and marking, and tyre / rim Information technology - Security coordination, Equivalent to KS ISO 7867- techniques - Test requiri;nents for cryptographic modules, To be rep1a.! by 1:2005 KS .ISOIIEC 24759 :2017 KS EAS 439-2:2007 Kenya Standard - Tyres and rims (metric series) for agricultural tractors and KS ISO/IEC machines Part 2: Service description and Kenya Standard - Information technology 18013-3:2009 load ratings, Equivalent to KS ISO 7867- - Personal identification - ISO-compliant driving licence Part 3: Access control, 2:2005 authentication and integrity validation, To KS EAS 440:2007 Kenya Standard - Tyres for agricultural be replaced by KS ISO1IEC 18013-3:2017 tractors and machines - 'Code-designated KS ISO/IEC 10116:2006 Kenya Standard - Information technology and service-description masked radial drive- - Security techniques - Modes of wheel tyres, Equivalent to KS ISO operation for an n-bit block cipher, To be 8664:2005 replaced by KS ISO/JEC 10116:2017 KS EAS 442-1:2007 Kenya Standard - Earth-mover tyres and KS ISO/IEC 9995-1:1994 Kenya Standard - Information technology rims Part I: Tyre designation and - Keyboard layouts for text and office dimensions, Equivalent to KS ISO 4250- systems Part 1: General principles 1:2006 governing keyboard layouts. / Office KS EAS 442-2:2007 Kenya Standard - Earth-mover tyres and Equipment, to be replaced by KS ISO/LEC rims Part 2: Loads and inflation pressures, 9995-1:2009 Equivalent to KS ISO 4250-2:2006 17th August, 2018 THE KENYA GAZETTE 2951

KS EAS 442-3:2007 Kenya Standard - Earth-mover tyres and KS EAS 471-1:2008 Kenya Standard - Aircraft tyres and rims rims Part 3: Rims, Equivalent to KS ISO Part 1: Specifications, Equivalent to KS ISO 4250-3:2006 3324-1:1997

- KS EAS 443-1:2007 Kenya Standard - Tyres (ply rating KS EAS 47 1-2:2008 Kenya Standard Aircraft tyres and rims marked series) and rims for agricultural Part 2: Test methods for tyres, Equivalent to tractors and machines Part 1: Tyre KS ISO 3324-2:1998 designation and dimensions, and approved KS EAS 473-1:2008 Kenya Standard - Motorcycle tyres and rim contours, Equivalent to KS ISO 425 1- rims (metric series) Part 1: Design guides, 1:2005 Equivalent 10 KS ISO 5751-1:2004

KS EAS 443-2:2007 Kenya Standard - Tyres (ply rating KS EAS 473-2:2008 Kenya Standard - Motorcycle tyres and marked series) and rims for agricultural rims (metric series) Part 2: Tyre dimensions tractors and machines Part 2: Tyre load and load-carrying capacities, Equivalent to ratings, Equivalent to KS ISO 425 1-2:2005 KS ISO 5751-2:2004

KS EAS 443-3:2007 Kenya Standard - Tyres (ply rating KS EAS 473-3:2008 Kenya Standard - Motorcycle tyres and marked series) and rims for agricultural rims (metric series) Part 3; Range of tractors and machines Part 3: Rims, approved rim contours, Equivalent to KS Equivalent to KS ISO 425 1-3:1994 ISO 5751-3:2004

KS EAS 443-4:2007 Kenya Standard - Tyres (ply rating KS EAS 474-1:2008 Kenya Standard - Bicycle tyres and rims marked series) and rims for agricultural Part I: Tyre designations and dimensions, tractors and machines Part 4: Classification Equivalent to KS ISO 5775-1:1997 and nomenclature, Equivalent to KS ISO KS EAS 474-2:2008 Kenya Standard - Bicycle tyres and rims 4251-4:1992 Part 2: Rims, Equivalent to KS ISO 5775- 2: 1996 KS EAS 443-5:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural KS EAS 18-1:2001 Kenya Standard - Cement Part 1: tractors and machines Part 5: Log skidder Composition, specification and conformity tyres, Equivalent to KS ISO 4251-5:1992 criteria for conanon cement, To be replaced by KS EAS 18-1:2016 KS EAS 444-1:2007 Kenya Standard - Industrial tyres and rims

Part 1: Pneumatic tyres (metric series) on KS EAS 18-2:2001 Kenya Standard - Cement Part 2: 50 tapered or flat base rims - Designation, Conformity evaluation, To be replaced by dimensions and marking, Equivalent to KS KS EAS 18-2:20 16 ISO 3739-1:2007 KS EAS 148-1:2000 Kenya Standard - Cement - Test KS EAS 444-2:2007 Kenya Standard - Industrial tyres and rims methods Part I: Determination of strength, Part 2: Pneumatic tyres (metric series) on To be replaced by KS EAS 148-1:2016 5apered or flat base rims - Load ratings, Equivalent to KS ISO 3739-2:1992 KS EAS 148-2:2000 Kenya Standard - Cement - Test methods Part 2: Chemical analysis, To be

KS EAS 445-1:2007 Kenya Standard - Industrial tyres and rims replaced by KS EAS 148-2:2016

- Solid tyres (metric series) for pneumatic KS EAS 148-3:2000 Kenya Standard - Cement - Test tyre rims Part 1: Designation, dimensions methods Part 3: Determination of setting and marking, Equivalent to KS ISO 10499- times and soundness, To be replaced by KS 1:1991 EAS 148-3:2016

KS EAS 445-2:2007 Kenya Standard - Industrial tyres and rims KS EAS 148-4:2000 Kenya Standard - Cement - Test - Solid tyres (metric series) for pneumatic Methods Part 4: Quantitative determination tyre rims Part 2: Load ratings, Equivalent to of constituents, To be replaced by KS EAS KS ISO 10499-2:1998 148-4:2016

- KS EAS 446:2007 Industrial tyres and rims Cylindrical and KS EAS 148-5:2000 Kenya Standard - Cement - Test conical base rubber solid tyres (metric methods Part 5: Pozzolanicity test for series) - Designation, dimensions and pozzolanic cements, To be replaced by KS marking, Equivalent to KS 150 10500:1991 EAS 148-5:2016

KS EAS 447:2007 Kenya Standard - Tyres for mobile cranes KS EAS 148-6:2000 Kenya Standard - Cement - Test and similar specialized machines, methods Part 6: Determination of fineness, Equivalent to KS ISO 10571:1995 To be replaced by KS EAS 148-6:2016

KS EAS 448:2007 Kenya Standard - Valves for tubeless KS EAS 148-7:2000 Kenya Standard - Cement - Test tyres and valves for tubes - Identification methods Part 7: Methods of taking and system for valves and their components, preparing samples, To be replaced by KS Equivalent to KS ISO 425 1-1:2005 EAS 148-7:2016 KS EAS 148-8:2000 Kenya Standard - Cement - Test KS EAS 449-1:2007 Kenya Standard - Truck and bus tyres and methods Part 8: Heat of hydration - rims (metric series) - Part I: Tyres. Equivalent to KS ISO 4209-1:2001 Solution method, To be replaced by KS EAS 148-8:2016

KS EAS 449-2:2007 Kenya Standard - Truck and bus tyres and rims (metric series) Part 2: Rims, KS 1555:2000 Kenya Standard - Specification for gully Equivalent to KS ISO 4209-2:2001 tops and manhole tops for vehicular and pedestrian areas, To be replaced by KS

KS EAS 469:2008 Kenya Standard - Passenger car tyres - 1555-1:2018, KS 1555-2:2018, KS 1555- Spare unit substitutive equipment (SUSE), 3:2018, KS 1555-4:2018, KS 1555-5:2018, Equivalent to KS ISO 16992:2006 KS 1555-6:2018 KS ISO 7165:1999 Kenya Standard - Fire-fighting - KS EAS 470:2008 Kenya Standard - Truck and bus tyres - Portable fire extinguishers - Performance Verifying tyre capabilities - Laboratory test methods, Equivalent to KS ISO and construction, To be replaced by KS ISO 10454:1999 7165:2017 2952 THE KENYA GAZETTE 17th August, 2018

KS ISO 11601:1999 Kenya Standard - Wheeled fire KS 1570-2:2007 Kenya standard - Specification for Skin extinguishers - Performance and Powders Part 2: Baby Powders, To be construction, To be replaced by KS ISO replaced by KS EAS 425-2:2017 11601:2017 KS 1767-1:2006 Kenya Standard - Kenya Standard - KS ISO 11602-1:2000 Kenya Standard - Fire protection - Specification for bath preparations Part 1: Portable and wheeled fire extinguishers Part Foam baths and shower gels. To be replaced Selection and installation, To be replaced by KS LAS 835-1:2017 by KS ISO 11602-1:2010 KS 1765:2003 Kenya Standard - Specification for KS ISO 11602-2:2000 Kenya Standard - Fire protection - avocado oil for cosmetic industry. To be Portable and wheeled fire extinguishers Part replaced by KS EAS 837:20 17 Inspection and maintenance, To be replaced by KS ISO 11602-2:2010 KS 916-1:2012 Kenya Standard - Shaving preparations - Specification Part 1: Shaving creams. To be KNWA 2393:2012 Kenya Standard - Monitoring of fortified replaced by KS EAS 840: 2017 food products- Guidelines / Food To be replaced by KS 2765:20 18 KS 602: 1999 Kenya Standard - Specification for hair oils, To be replaced by KS EAS 841:2017 KS 2299:2012 Kenya Standard - Code of practice for Ante-mortem and post-mortem inspection KS 576:2006 Kenya Standard - Hair shampoo, soap of meat animals To be replaced by KS based - Specification, To be replaced by 2761:2018 KS EAS 842-1:2017

KS 2298:2012 Code of practice for Ante-mortem and post- KS 793:1999 Kenya Standard - Specification for liquid mortem inspection of poultry To be oxidation hair dyes, aryl di-amine-based, To replaced by KS 2761:2018 be replaced by KS EAS 844: 2017

KS 2430:2012 Kenya Standard - Ginger paste - KS 1569: 2001 Kenya Standard - Specification for Specification, To be replaced by KS cosmetic pencils, To be replaced by KS 2430:2018 LAS 845: 2017

KS 243 1:2012 Kenya Standard - Garlic paste - KS 1509:2000 Kenya Standard —Glossary of terms Specification, To be replaced by KS relating to the cosmetic industry. 243 1:20 18

KS 2432:2012 Kenya Standard - Garam masala - Dated the 20th April, 2018. Specification, To be replaced by KS 2432:2018 CHARLES ONGWAE, MR/4796363 Secretary, National Standards Council. KS 2131:2012 Kenya Standard - Tamarind concentrate - Specification, To be replaced by KS 2131:2018 GAZETFE NOTICE No.8457

KS 1284:2008 Kenya Standard - Substitute vinegar THE LEGAL EDUCATION ACT Specification, To be replaced by KS (No. 27 of2012) 1284:2018 PASSING OF EXAMINATIONS AND PUPILAGE KS ISO 5127:2001 Kenya Standard - Information and PURSUANT to section 8 (1) (/) of the Legal Education Act, 2012, documentation - Foundation and vocabulary, To be replaced by KS ISO it is notified for general information that the following twenty-four 5127:2017 (24) persons:

KS ISO 11799:2003 Kenya Standard - Information and Reg. No. Name ID/Passport Nationality documentation - Document storage Number requirements for archive and library CLE20I 30820 Wabwire Joshua A2428566 Kenyan materials, To be replaced by KS ISO CLE20140556 11799:2015 Mama Kevin Ndung'u 27842230 Kenyan CLE20141466 Ongeta Jared Juma 22453552 Kenyan KS ISO 15489-1:2001 Kenya Standard - Information and CLE20141493 Mutwii Jones Mutuku 5973178 Kenyan documentation - Records management -- CLE20 150695 Kwesiga James BI 144253 Ugandan Part 1: Concepts and principles, To be CLE20150788 Mama Samuel 27052782 Kenyn replaced by KS ISO 15489-1:2016 Kimumu CLE20150942 Mohammed Nabil 27136911 Kenyan KS ISO 20712-3:2008 Kenya Standard - Water safety signs and beach safety flags Part: 3 Guidance for use, Mohammed To be replaced by KS ISO 20712-3:2014 CLE20I 60119 Mutitu Esther Njeri 28776974 Kenyan CLE20160153 Kevin Clay Odari 29629808 Kenyan KS EAS 64:2000 Kenya Standard - Groundnut (peanut) oil CLE20160288 Olivia Mole Mwachofi 23358547 Kenyan for cosmetic industry - Specification. To CLE20160359 KwingaNdunge 29583716 Kenyan be replaced by KS EAS 642017 Carolyne CLE20160568 Ng'ang'a Simon 29287634 Kenyan KS 800: 1989 Kenya Standard - Specification for coconut oil for Cosmetic industry, To be Karanja replaced by KS EAS 65:2017 CLE2016 1066 Mtsumi Ashina Ntenga 29349006 Kenyan CLE20I6I 124 Mwangi Daisy Gathoni 28480079 Kenyan KS 797: 1989 Kenya Standard - Specification for sesame CLE2016I 176 Langat Hillary 29300695 Kenyan (simsim) oil for cosmetic industry, To be Kipngetich replaced by KS EAS 86:20 17 CLE20161314 DecheDzidza 29705885 Kenyan Emmaculate KS EAS 86:2000 Sesame (simsim) oil for cosmetic industry CLE20161440 Kiyuki Mwari Betty - Specification. To be replaced by KS 29647595 Kenyan EAS 86: 2017 CLE20161719 Kimani Charles 29616753 Kenyan Muchiri KS 1570-1:2001 Kenya Standard - Specification for skin CLE2016I 752 Anne Njeri Kamau 29868205 Kenyan powders Part 1: Body and face powders, To CLE20I61776 Tumaini Wamocha 32383143 Kenyan be replaced by KS EAS 425-1:2017 Nasongo Samuel

17th August, 2018 THE KENYA GAZETTE 2963 GAZETFE NOTICE No. 8525 GAZETTE NOTICE No.8529 CHANGE OF NAME CHANGE OF NAME NOTICE is given that by a deed poll dated 30th January, 2018, NOTICE is given that by a deed poll dated 1st July, 2017, duly duly executed and registered in the Registry of Documents at Nairobi executed and registered in the Registry of Documents at Nairobi as as Presentation No. 1341, in Volume Di, Folio 190/4716, File No. Presentation No. 1711, in Volume Dl, Folio 128/3754, File No. MMXVIII, by our client, Denis Muriithi M'Njaria, of P.O. Box 6621- MMXVIII, by me, Duncan Mwania Chengo, formerly known as 00100, Nairobi in the Republic of Kenya, formerly known as Denis Duncan Mwania Kyengo, formally and absolutely renounced and Muriithi Wera, formally and absolutely renounced and abandoned the abandoned the use of my former name Duncan Mwania Kyengo and use of his former name Denis Muriithi Wera and in lieu thereof in lieu thereof assumed and adopted the name Duncan Mwania assumed and adopted the name Denis Muriithi M'Njaria, for all Chengo, for all purposes and authorizes and requests all persons at all purposes and authorizes and requests all persons at all times to times to designate, describe and address me by my assumed name designate, describe and address him by his assumed name Denis Duncan Mwania Chengo only. Muriithi M'Nj aria only. DUNCAN MWANIA CHENGO, KOMU & KAMENJU, MRI5 159720 formerly known as Duncan Mwania Kyengo. Advocates for Denis Muriithi M'Njaria, MRI5 159787 formerly known as Denis Muriithi Wera. GAZETFE NOTICE No. 8530 CHANGE OF NAME GAZET]TE NOTICE No.8526 NOTICE is given that by a deed poll dated 25th July, 2018, duly CHANGE OF NAME executed and registered in the Registry of Documents at Nairobi as Presentation No. 2595, in Volume DI, Folio 208/5849, File No. NOTICE is given that by a deed poll dated 15th September, MMXVIII, by our client, Maureen Kere Odumbe (Guardian) on behalf 2017, duly executed and registered in the Registry of Documents at of Alexandra Kere Odumbe (minor), formerly known as Amne Seha Mombasa as Presentation No. 417, in Volume B-13, Folio formally and absolutely renounced and abandoned the use of his 1832/13415, File No. 1637, by my client, Naheed Rishad Bawazir, of former name Amne Seha, and in lieu thereof assumed and adopted the P.O. Box 83004-80100, Mombasa in the Republic of Kenya, formerly name Alexandra Kere Odumbe for all purposes and authorizes and known as Naheed Rishad Hamid, formally and absolutely renounced requests all persons at all times to designate, describe and address him and abandoned the use of his former name Naheed Rishad Hamid and by his assumed name Alexandra Kere Odumbe only. in lieu thereof assumed and adopted the name Naheed Rishad Bawazir, for all purposes and authorizes and requests all persons at all WOKABI MATHENGE & COMPANY, times to designate, describe and address him by his assumed name Advocates for Maureen Kere Odumbe, Naheed Rishad Bawazir only. (Guardian) on behalf ofAlexandra Kere Odumbe (minor), MR/S 155590 formerly known as Amne Seha. NDEGWA KATISYA SITONIK & ASSOCIATES, Advocate for Naheed Rishad Bawazir, MRJ5 159929 formerly known as Naheed Rishad Hamid. GAZETFE NOTICE No. 8531 CHANGE OF NAME GAZErFE NOTICE No. 8527 NOTICE is given that by a deed poll dated 5th June, 2018, duly CHANGE OF NAME executed and registered in the Registry of Documents at Nairobi as Presentation No. ,1654, in Volume DI, Folio 180/4534, File No. NOTICE is given that by a deed poil dated 15th July, 2018, duly MMXVIII, by me, Hassan N. Lakicha & Co., advocates on behalf of executed and registered in the Registry of Documents at Mombasa as Abdilatif Ibrahim Noor, of P.O. Box 15420-00200, Nairobi in the Presentation No.4, in Volume B-13, Folio 1857/13675, File No. 1637, Republic of Kenya, formerly known as Abdilatif Ibrahim Ali, formally by my client, Fatma A. Wang'ombe, of P.O. Box 1294-80200, and absolutely renounced and abandoned the use of his former name Malindi in the Republic of Kenya, formerly known as Lilian Wangui Abdilatif Ibrahim Ali, and in lieu thereof assumed and adopted the Rukwaro, formally and absolutely renounced and abandoned the use name Abdilatif Ibrahim Noor for all purposes and authorizes and of her former name Lilian Wangui Rukwaro and in lieu thereof requests all persons at all times to designate, describe and address him assumed and adopted the name Fatma A. Wang'ombe, for all purposes by his assumed name Abdilatif Ibrahim Noor only. and authorizes and requests all persons at all times to designate, describe and address her by her assumed name Fatma A. Wang'ombe Dated the 7th August, 2018. only. HASSAN N. LAKICHA & COMPANY, Advocates on beha If ofAbdilatifibrahim Noor, OKINYO BYRON BARRACK, formerly known as Abdilatif Ibrahim Ali. Advocate for Fatma A. Wang 'ombe, MRJ5 159716 MRJ5 159930 formerly known as Lilian Wangui Rukwaro.

GAZErFE NOTICE No. 8532

GAZETFE NOTICE No. 8528 CHANGE OF NAME CHANGE OF NAME NOTICE is given that by a deed poll dated 22nd February, 2018, duly executed and registered in the Registry of Documents at Nairobi NOTICE is given that by a deed poll dated 19th June, 2018, duly as Presentation No. 323, in Volume DI, Folio 79/1250, File No. executed and registered in the Registry of Documents at Mombasa as MMXVIII, our client Helen Nelie Wambui Nyambura, of P.O. Box Presentation No. 419, in Volume B-13, Folio 1857/13673, File No. 53386-00200, Nairobi in the Republic of Kenya, formerly known as 1637, by me, Jeremy Chege Njonjo, of P.O. Box 50106-00100, Nelie Hellen Wambui alias Hellen Nyambura Mwaura, formally and Nairobi in the Republic of Kenya, formerly known as Njonjo Chege absolutely renounced and abandoned the use of her former name Nelie Kariuki, formally and absolutely renounced and abandoned the use of Hellen Wambui alias Hellen Nyambura Mwaura, and in lieu thereof my former name Njonjo Chege Kariuki and in lieu thereof assumed assumed and adopted the name Helen Nelie Wambui Nyambura for all and adopted the name Jeremy Chege Njonjo, for all purposes and purposes and authorizes and requests all persons at all times to authorizes and requests all persons at all times to designate, describe designate, describe and address her by her assumed name Helen Nelie and address me by my assumed name Jeremy Chege Njonjo only. Wambui Nyambura only. Dated the 1st August, 2018. KARANJA NJENGA & COMPANY, Advocates of Helen Nelie Wambui Nyambura, JEREMY CHEGE NJONJO, formerly known as Nelie Hellen Wambui MRI5 159522 formerly known as Njonjo Chege Kariuki. MR/S 155625 alias Hellen Nyambura Mwaura.

2964 -- THE KENYA GAZETTE 17th August, 2018

NOW ON SALE IMPORTANT NOTICE TO SUBSCRIBERS TO THE KENYA GAZETTE ECONOMIC SURVEY, 2011 THE following notes are for the guidance of persons submitting "copy" for Price.KSh. 1,000 inclusion in the Kenya Gazette, Supplement, etc.: The Kenya Gazette contains Notices of a genera) nature which do not affect legislation. They are, therefore, submitted to the Government THE FINANCE BILL, 2014 Printer directly. Legislative Supplement contains Rules and Regulations which are Price. KSh. 235 issued by the Central Government. Because of this, they must be submitted to the Government Printer through the office of the Attorney-General. Bill Supplement contains Bills which are for introduction in the 2011/2012 National Assembly. ESTIMATES OF RECURRENT Act Supplement contains Acts passed by the National Assembly. EXPENDITURE All "copy" submitted for publication should be prepared on one side of an OF THE A4 sheet no matter how small the Notice is, each page being numbered and should be typewritten with double spacing. Copy should be clear, legible and GOVERNMENT OF KENYA contain no alterations. FOR THE YEAR ENDING Particular attention should be paid to the following points: 30TH JUNE, 2011 Signature must be supported by rubber-stamping or typing the name of the signatory in capital letters. VOL.1 Must be correct and filled in where necessary. Price: KSh. 1,400 Care should be taken to ensure that all headings to Notices and references to legislation are up to date and conform with the Revised VOL.11 Edition of the Laws of Kenya. Price. KSh. 1,200 EXTRACT FROM THE CoDy OF REGULATIONS, SECTION D- Kenya Gazette VOL. III "D 34. (1) Communications for the Kenya Gazette should reach the Price.KSh. 1,100 Government Printer not later than 9 a.m. on Friday of the week before publication is desired. The Government Printer will not publish communications received after that hour until the next subsequent issue of the Gazette. (2) Ministries will be required to pay for the Kenya Gazette and to meet the 2011/2012 cost of advertising in it. ESTIMATES OF DEVELOPMENT It is emphasized that these notes are for guidance only, but it is requested that persons submitting copy for publication first satisfy themselves that such EXPENDITURE copy is complete in every respect. OF THE SUBSCRIPTION AND ADVERTISEMENT CHARGES GOVERNMENT OF KENYA With effect from 1st July, 2012, subscription and advertisement fee for the FOR YEAR ENDING Kenya Gazette are as follows: SUBSCRIPTION CHARGES: 30TH JUNE, 2011 KSh. cts. Annual Subscription (excluding postage in Kenya) ...... 13,920 00 VOL.1 Annual Subscription (including postage in Kenya) ...... 16,935 00 Annual Subscription (Overseas) ...... 32,015 00 Price: KSh. 1,100 Half-year Subscription (excluding postage in Kenya) ...... 6,960 00 Half-year Subscription (including postage in Kenya)...... 8,470 00 VOL.11 Half-year Subscription (overseas)...... 16,010 00 Price. KSh. 1,100 Single copy without supplements...... 60 00 GAZETTED SUPPLEMENT CHARGES—PER Copy: POstage in EA THE NATIONAL ASSEMBLY KSh. cts KSh. cts. CONSTITUENCIES AND COUNTY Upto2 pages...... 15 00 60 00 Upto 4 pages...... 25 00 60 00 ASSEMBLY WARDS ORDER, 2012 Upto 8 pages ...... 40 00 60 00 Upto12 pages...... 60 00 60 00 Kenya Gazette Supplement No. 13 Upto 16 pages...... 80 00 60 00 Upto 20 pages...... 95 00 155 00 (Legal Notice No. 14 of 2012) Upto24pagea ...... 110 00 115 00 Upto32pages ...... 145 00 115 00 Price: KSh. 880 Up to 36 pages ...... 165 00 ' Up1040 pagea ...... 180 00 depending Each additional 4 pages or part thereof ...... 20 00 STATISTICAL ABSTRACT, 2011 J ADVERTISEMENT CHARGES: KS/I. cts. Price: KS/i. 1,000 Full page...... 27,840 00 Fullsingle column...... 13,920 00 Three-quarter column ...... 10,440 00 Half column...... 6,960 00 THE CONSTITUTION OF KENYA Quarter column or less ...... 3.480 00 Price: KSh. 250 Subscribers and advertisers are advised to remit payments by bankers cheques, or deposit using our account at National Bank of Kenya, A/C No. 0100 1000903 100, drawn in favour of "Government Printers". For further Information contact: The Government Revenue stamps cannot be accepted. Subscriptions and advertisement Printer, P.O. Box 30128-00100, Nairobi, Tel. charges are paid in advance. S. N. MIGWI, 317840/41/57/86/87. Government Printer. PRINTED AND PUBLISHED BY THE GOVERNMENT PRINTER, NAIROBI