Features of your vehicle

AUDIO SYSTEM

CAUTION • Before entering a place with a low height clearance, be sure that the antenna is removed. • Be sure to remove the antenna before washing the car in an auto- matic car wash or it may be dam- aged. • When reinstalling your antenna, it is important that it is fully tight- OED036069 ened to ensure proper reception. But it could be removed when Antenna parking the vehicle or when load- D300102AFD ing cargo on the roof rack. Roof antenna • When cargo is loaded on the roof Your car uses a roof antenna to receive rack, do not place the cargo near both AM and FM broadcast signals. This the antenna pole to ensure proper antenna is a removable type. To remove reception. the antenna, turn it counterclockwise. To install the antenna, turn it clockwise.

497 Features of your vehicle

VOL (▲/▼) (1) If the SEEK button is pressed for less • Press the up button (▲) to increase than 0.8 second, it will work as follows in volume. each mode. • Press the down button (▼) to decease volume. RADIO mode It will function as the PRESET STATION MODE (2) select buttons. Press the button to select Radio, Tape (if equipped) or CD (compact disc). CDP mode It will function as the TRACK UP/DOWN SEEK (▲/▼) (3) button. OFD047214 If the SEEK button is pressed for 0.8 sec- D300200AFD ond or more, it will work as follows in CDC mode Audio remote control each mode. It will function as the TRACK UP/DOWN (if equipped) button. The steering wheel audio remote control RADIO mode button is installed to promote safe driv- It will function as the AUTO SEEK select Detailed information for audio control ing. button. buttons is described in the following pages in this section. CAUTION CDP mode It will function as the FF/REW button. Do not operate audio remote con- trol buttons simultaneously. CDC mode It will function as the DISC UP/DOWN button.

4 98 Features of your vehicle

FM reception AM reception FM radio station

¢¢¢

¢¢¢ ¢¢¢

JBM001 JBM002 JBM003 D300800AFD-UK AM broadcasts can be received at FM broadcasts are transmitted at high How car audio works greater distances than FM broadcasts. frequencies and do not bend to follow the AM and FM radio signals are broadcast This is because AM radio waves are earth's surface. Because of this, FM from transmitter towers located around your transmitted at low frequencies. These broadcasts generally begin to fade at short distances from the station. Also, city.They are intercepted by the radio anten- long, low frequency radio waves can fol- FM signals are easily affected by build- na on your car. This signal is then received low the curvature of the earth rather than ings, mountains, or other obstructions. by the radio and sent to your car speakers. travelling straight out into the atmos- phere. In addition, they curve around These can result in certain listening con- When a strong radio signal has reached ditions which might lead you to believe a obstructions so that they can provide bet- your vehicle, the precise engineering of problem exists with your radio. The fol- your audio system ensures the best pos- ter signal coverage. lowing conditions are normal and do not sible quality reproduction. However, in indicate radio trouble: some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the dis- tance from the radio station, closeness of other strong radio stations or the pres- ence of buildings, bridges or other large obstructions in the area.

499 Features of your vehicle

Using a mobile phone or a two- way radio When a mobile phone is used inside the ¢¢¢ vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the mobile phone at a place as far as possi- ble from the audio equipment.

CAUTION JBM004 JBM005 When using a communication sys- • Fading - As your car moves away from • Station Swapping - As a FM signal tem such a mobile phone or a radio the radio station, the signal will weaken weakens, another more powerful sig- set inside the vehicle, a separate and sound will begin to fade. When this nal near the same frequency may external antenna must be fitted. occurs, we suggest that you select begin to play. This is because your When a mobile phone or a radio set another stronger station. radio is designed to lock onto the clear- is used with an internal antenna • Flutter/Static - Weak FM signals or est signal. If this occurs, select anoth- alone, it may interfere with the vehi- large obstructions between the trans- er station with a stronger signal. cle's electrical system and adverse- mitter and your radio can disturb the • Multi-Path Cancellation - Radio signals ly affect safe operation of the vehi- signal causing static or fluttering nois- being received from several directions cle. es to occur. Reducing the treble level can cause distortion or fluttering. This may lessen this effect until the distur- can be caused by a direct and reflect- bance clears. ed signal from the same station, or by WARNING signals from two stations with close Don't use a mobile phone when you frequencies. If this occurs, select are driving. You must stop at a safe another station until the condition has place to use a mobile phone. passed.

4 100 Features of your vehicle

Care of cassette tapes Care of disc (if equipped) • Depending on the type of CD-R/CD- (if equipped) • If the temperature inside the car is too RW CDs, certain CDs may not operate • Because the thickness of a cassette high, open the car windows for ventilation normally according to manufacturing tape with the total playback time of before using your car audio. companies or making and recording over 60 minutes (C-60) are too thin, we • It is illegal to copy and use methods. In such circumstances, if you suggest that you do not use any of MP3/WMA/AAC/WAVE files without still continue to use those CDs, they them to avoid having tapes being tan- permission. Use CDs that are created may cause the malfunction of your car gled. only by lawful means. audio system. • To achieve better sound quality, period- • Do not apply volatile agents such as ically clean the tape head using a cot- benzene and thinner, normal cleaners ✽ NOTICE - Playing an ton stick with colourless alcohol (once and magnetic sprays made for ana- Incompatible Copy-Protected per month). logue disc onto CDs. Audio CD • If a tape is too loose, fasten it to reel by • To prevent the disc surface from get- Some copy protected CDs, which do not winding with objects like a pencil. ting damaged. Hold and carry CDs by comply with the international audio CD • Because dust or foreign objects on a the edges or the edges of the centre standards (Red Book), may not play on cassette tape may damage the play- hole only. your car audio. Please note that if you try to play copy protected CDs and the back head, always store tapes in their • Clean the disc surface with a piece of cases when not in use. CD player does not perform correctly soft cloth before playback (wipe it from the CDs maybe defective, not the CD • Make sure cassette tapes are kept the centre to the outside edge). player. away from magnetic devices (TV, • Do not damage the disc surface or stereo system, etc) in order to achieve attach pieces of sticky tape or paper better sound quality. onto it. • Be certain that no objects or substances • Make sure on undesirable matter other other than cassette tapes are inserted than CDs are inserted into the CD into the cassette tape player. player (Do not insert more than one • Because tape media can be distorted CD at a time). when exposed to direct sunlight, do not • Keep CDs in their cases after use to leave cassette tapes on the seats, protect them from scratches or dirt. dashboard or near the back wind- screen.

4101 Features of your vehicle

RADIO, SET UP, VOLUME CONTROL (PA710R) (IF EQUIPPED)

1. FM Selection Button 2. AM Selection Button 3. TA Selection Button 4. CD/AUX Selection Button 5. Automatic Channel Selection Button 6. Power ON/OFF 7. AUTO STORE Button 8. Screen ON/ OFF Button 9. Information Display Button 10. SET UP Button 11. TUNE/ENTER Button 12. PTY(FLDR) Button 13. Pre-set Button

A-200FDE

4 102 Features of your vehicle

1. FM Selection Button • When the [SEEK ]button is pressed, 9. Information Display Button Turns to FM mode and toggles FM1 and it increases the band frequency by Displays the information of the channel FM2 when the button is pressed each 50khz to automatically select channel. currently played by RDS. time. Stops at the previous frequency if no channel is found. 10. SET UP Button 2. AM Selection Button Press this button to turn to the SOUND, Turns to AM mode, and toggles in the 6. Power ON/OFF & Volume Control Button RDS option, clock setting, time display, order of MW➟LW➟···➟MW···when the SCROLL, SDVC, temperature display button is pressed each time. Turns on/off the set when the IGNITION and adjustment mode. SWITCH is on ACC or ON. If the button If no action is taken for 5 seconds after 3. TA Selection Button is turned to the right, it increases the pressing the button, it will return to the In FM, CD, AUX mode, turns on/off the volume and left, decreases the volume. play mode.(After entering SET UP mode, reception of TA channels of RDS. move between items using the left, right and PUSH functions of the TUNE but- 7. AUTO STORE Button ton.) 4. CD/AUX Selection Button When the button is pressed, it automati- The set up item changes from SOUND If there is a cd in the CDP DECK it turns cally selects and saves channels with ➟RDS➟CLOCK➟TIME➟SCROLL➟SDV to CD mode, and if a device is connected high reception rate to PRESET buttons C➟TEMP➟SOUND... to AUX then it toggles. (1~6) and plays the channel saved in PRESET1. CD➟AUX➟CD··· when the button is 11. TUNE/ENTER Button pressed each time.(It will not turn to AUX If no channel is saved after AST, it will if the auxiliary device is not connected.) play the previous channel. Turn this button clockwise by one notch to increase frequency by 0.05Mhz from current frequency. 8. Screen ON/ OFF Button 5. Automatic Channel Selection Turn this button counterclockwise by one Button Turns off/on the displayed data and light notch to decrease frequency by 0.05Mhz • When the [SEEK ]button is pressed, on LCD. from current frequency. it reduces the band frequency by The screen and light will be turned on by Press this button whilst holding SET UP 50khz to automatically select channel. pressing any button except DARK button button to activate / inactivate the item to. Stops at the previous frequency if no when the screen is turned off. Select SET UP item using left and right channel is found. function of the Tune button.

4103 Features of your vehicle

12. PTY(FLDR) button • Moves [PTY ] Button when search- ing PTY in RDS Broadcasting Program Type selection. • Moves [PTY ] button when search- ing PTY in RDS Broadcasting Program Type selection.

13. Pre-set Button Push [1]~[6] buttons less than 0.8 second to play the channel saved in each button. Push pre-set button for 0.8 second or longer to save current channel to the respective button with a beep.

4 104 Features of your vehicle

CD (PA710R) (IF EQUIPPED)

1. CD loading slot 2. CD indicator 3. CD Eject Button 4. AUX Selection Button 5. Automatic Track Selection Button 6. INFO Button 7. TUNE/ENTER Button 8. REPEAT Button 9. RANDOM Play Button 10. SCAN Play Button 11. MARK Play Button

A-200FDE

4105 Features of your vehicle

1. CD loading slot 5. Automatic Track Selection Also, turn this button counterclockwise to Please face printed side upward and Button display songs before current song. gently push in. When the ignition switch • Push [SEEK ] button for less than To listen to the displayed song, press the is on ACC or ON and power is off, power 0.8 second to play from the beginning button to skip to the song and play. is automatically turned on if the CD is of current song. 8.REPEAT Button loaded. This CDP supports both 8cm and • Push [SEEK ] button for less than 12 cm CDs. But if VCD, Data CD, MP3 0.8 second and press again within 1 Repeats current song when the button is CD are loaded, "Er-6" message will second to play the previous song. pressed for less than 0.8 second. appear and CD will be ejected. Repeats the entire DISC when the button • Push [SEEK ] button for 0.8 or is pressed for 0.8 second or longer. longer to initiate reverse direction high 2. CD Indicator speed sound search of current song. 9. RANDOM Play Button When car ignition switch is ACC or ON • Push [SEEK ] button for less than Turns on/off the randomization of the and if the CD is loaded, this indicator is 0.8 second to play the next song. lighted. If the CD is ejected the light is play list of files in the currently played turned off. • Push [SEEK ] button for 0.8 or DISC. longer to initiate high speed sound To cancel the mode, press the key once search of current song. 3. CD eject Button again. Push button to eject the CD during 6. INFO Button 10. SCAN Play Button CD playback. This button is enabled Plays first 10 seconds of each song in when ignition switch is off. Displays the information of the current CD TRACK in the order of DISC the DISC. TITLE➟DISC ARTIST➟TRACK TITLE➟ To cancel the mode, press the key once 4. AUX Selection Button TRACK ARTIST➟TOTAL TRACK➟ Play again. If the auxiliary device is connected, it Screen➟DISC TITLE➟···.(not displayed if turns to AUX MODE to play the sound the information is not available on the 11. MARK Play Button from the auxiliary player. DISC.) Press the button for 0.8 second or longer If no Disc and auxiliary device is connected, to mark or unmark the current song. it displays "NO Media" for 5 seconds and 7. TUNE/ENTER Button Press the button for less than 0.8 to play returns to the previous mode." Turn this button clockwise to display currently marked song. songs after current song.

4 106 Features of your vehicle

CAUTION IN USING (Continued) (Continued) USB DEVICE • Depending on the condition of • If you dismount the external USB • To use the external USB device, the external USB device, the con- device during playback in USB nected external USB device can mode, the external USB device can make sure the device is not be unrecognizable. be damaged or malfunction. mounted when starting up the • When the VHAPTTL byte/sector Therefore, mount the external USB vehicle and mount the device device when the engine is turned after starting up. setting of External USB devices is off or in another mode. • If you start the vehicle when the not either 512BYTE or 2048BYTE, then the device will not be recog- • Depending on the type and capac- USB device is mounted, it may nized. ity of the external USB device or damage the USB device. (USB is • Only the USB device formatted to the type of the files stored in the not ESA) device, there is a difference in the • If the vehicle is started up or FAT 12/16/32. • USB device without USB IF authen- time taken for recognition of the turned off whilst the external USB device, but this is not a trouble device is connected, the external tication may not be recognizable. • Make sure the USB connection and you only have to wait. USB device may not work. • Do not use the USB device for other • It may not play inauthentic MP3 or terminal does not come in contact purposes than playing music files. WMA files. with human body or any object. • If you repeat mounting or dis- • Use of USB accessories such as 1) It can only play MP3 files with mounting USB device in a short the recharger or heater using the compression rate between period of time, it may break the USB I/F may lower the perform- 8Kbps~320Kbps. device. ance or cause trouble. 2) It can only play WMA music • You might hear strange noise • If you use devices such as the files with the compression rate when mounting or dismounting a USB hub you purchased sepa- between 8Kbps~320Kbps. USB device. rately, the vehicle’s audio system • Take cautions for static electricity may not recognize the USB when mounting or dismounting device. Connect the USB device the external USB device. (Continued) directly to the multimedia termi- • Encoded MP3 PLAYER is not rec- nal of the vehicle. ognizable.

(Continued) 4107 Features of your vehicle

USING USB (PA710R) (IF EQUIPPED)

1. AUX Selection Button 2. Track moving Button 3. INFO Selection Button 4. Folder moving Button 5. TUNE/ENTER Button 6. RANDOM Playback Button 7. REPEAT Selection Button 8. SCAN Selection Button

A-200FDE

4 108 Features of your vehicle

In case USB is connected to the multiple 3. INFO Button 6. RANDOM Playback Button terminal inside the console on the left Displays the information of the file cur- Press the button for less than 0.8 second hand side of the driver’s seat. When USB rently played in the order of FILE NAME to start or stop the random playback of is connected, the ‘USB’ icon will be dis- ➟TITLE➟ARTIST➟ALBUM➟FOLDER➟ the songs in the current folder. played on the top right corner of the dis- TOTAL FILE➟FILE NAME➟… (Displays Press the button for more than 0.8 sec- play screen. no information if the file has no song ond to randomly play the entire songs in information.) the USB device. 1.AUX Selection Button Press the button again to cancel the mode. If USB is connected, it switches to the 4. Folder moving Button USB mode from the CD mode to play the • Moves [FLDR ] button child folder of 7. REPEAT Button song files stored in the USB. the current folder and displays the first Press the button for less than 0.8 second If there are no CD and USB mode from song in the folder. Press TUNE/ENTER to repeat the song currently played. the Radio mode, it displays ‘NO MEDIA’. button to move to the folder displayed. Press the button for more than 0.8 sec- It will play the first song in the folder. ond to repeat the entire songs in the USB 2. Track Moving Button • Moves [FLDR ] button parent folder device. • Press the [SEEK ] button for less and displays the first song in the folder. than 0.8 second to play from the begin- Press TUNE/ENTER button to move to 8. SCAN Button ning of the song currently played. the folder displayed. It will play the first Plays 10 seconds of each song in the Press the button for less than 0.8 sec- song in the folder. USB device. ond and press it again within 1 second Press the button once again to cancel to move to and play the previous track. 5. TUNE/ENTER Button scanning. Press the button for 0.8 second or Turn this button clockwise to display the longer to play the song in reverse songs next to the currently played song. direction in fast speed. Turn the button counterclockwise to dis- • Press the [SEEK ] button for less play the songs before the currently than 0.8 second to move to the next played song. track. Press the button for 0.8 second Press the button to skip to and play the or longer to play the song in forward selected song. direction in fast speed.

4109 Features of your vehicle

✽ NOTICE FOR USING i-Pod CAUTION IN USING (Continued) DEVICE • When the i-Pod cable is connected, • Some i-Pod models might not support i-Pod DEVICE • You need the power cable exclu- the system can be switched to the the communication protocol and the AUX mode even without the i-Pod files will not be played. (i-Pod models sive for i-Pod (purchased sepa- device and can cause noise. supported: Mini, 4G, Photo, Nano, rately) in order to operate i-Pod Disconnect i-Pod cable when you 5G) with the buttons on the audio sys- are not using the i-Pod device. • The order of search or playback of tem. The PC cable provided by songs in the i-Pod can be different Apple may cause malfunction and from the order searched in the audio do not use it for vehicle use. system. • When connecting the device with • If the i-Pod crashes due to its own i-Pod cable, push in the jack fully trouble, reset i-Pod. (Reset: Refer to i- Pod manual) not to interfere with communica- • i-Pod may not operate normally on tion. low battery. • When adjusting the sound effects of i-Pod and the audio system, the sound effects of both devices will overlap each and might cause reduce or distort the quality of the sound. • Deactivate (turn off) the equalizer function of i-Pod when adjusting the audio system’s volume, and turn off the equalizer of the audio system when using the equalizer of i-Pod.

(Continued)

4 110 Features of your vehicle

RUNNING i-Pod (PA710R) (IF EQUIPPED)

1. i-Pod Selection Button 2. Track moving Button 3. INFO Selection Button 4. Category Selection Button 5. TUNE/ENTER Button 6. RANDOM Playback Button 7. REPEAT Selection Button

A-200FDE

4111 Features of your vehicle

In case the i-Pod exclusive cable is con- • Press the [SEEK ] button for less 5. TUNE/ENTER Button nected to the multiple terminal inside the than 0.8 second to move to the next When you turn the button clockwise, it console on the left hand side of the dri- track. will display the songs (category) next to ver’s seat. When the i-Pod is connected, Press the button for 0.8 second or the song currently played (category in the ‘i-Pod’ icon will be displayed on the the same level). top right corner of the display screen. longer to play the song in forward direction in fast speed. Also, when you turn the button counter- clockwise, it will display the songs (cate- 1. i-Pod Selection Button gory) before the song currently played 3. INFO Button If i-Pod is connected, it switches to the i- (category in the same level). Pod mode from the CD mode to play the Displays the information of the file cur- If you want to listen to the song displayed song files stored in the i-Pod. rently played in the order of FILE NAME in the song category, press the button, ➟ ➟ ➟ ➟ If there are no CD and AUX mode from TITLE ARTIST ALBUM FILE then it will skip to the selected song and ➟ the Radio mode, it displays ‘NO MEDIA’. NAME … play. (Displays no information if the file has no song information.) 2. Track Moving Button 6. RANDOM Playback Button Press the button for less than 0.8 second • Press the [SEEK ] button for less 4. Category Selection Button than 0.8 second to play from the begin- to activate or deactivate the random play- ning of the song currently played. Moves to the upper category from cur- back of the songs within the current cat- rently played category of the i-Pod. egory. Press the button for less than 0.8 sec- To move to (play) the category (song) ond and press it again within 1 second Press the button for longer than 0.8 sec- displayed, press TUNE/ENTER button. to move to and play the previous track. ond to randomly play all songs in the You will be able to search through the entire album of the i-Pod. Press the button for 0.8 second or lower category of the selected category. Press the button once again to cancel the longer to play the song in reverse The order of i-Pod’s category is SONG, mode. direction in fast speed. ALBUMS, ARTISTS, GENRES, and i- Pod. 7. REPEAT Button Repeats the song currently played.

4 112