6421821 97A51cb7.Pdf

�� REFERENCES ��

� �� A23 �� A2 E19 ��

�� E19 A2

��

�� Rue des Coopérateurs – Zone de Bellevue - BP 20103 – 59722 DENAIN CEDEX – France Tél : +33 (0)3 27 31 00 00 – Fax : + 33 (0)3 27 31 47 16 - [email protected]

Kontakt in Deutschland: GTM Qualitätsstähle Import-Export GmbH - Durchholzer Str. 140 - D-58456 Witten Tel.: +49 (0)23 02 / 973 00-0 - Fax: +49 (0)23 02 / 973 00-30 - [email protected] ��

�� www.lagtm.com Issued in March 2009 HEAT TREATMENT COLD FINISHING We also carry different operations after heat treatment such as straightening, peeling, sawing or control. PRESENTATION HISTORY For semi products dedicated to mechanical industries and Forge : automobile, railway, mechanical engineering industries, agricultural material, civil engineering, prestressed ties. �� a GTM France is located in DENAIN, the main city of the �� L Valenciennes mining area. Mines were exploited there GAS FURNACE REMOVABLE LOW FREQUENCY �� as Eearly as 1826. �� - 1835 Denain’s fi rst railway is established. �� AND MOBILE INDUCTION LINE �� - 1840 development of the heavy steel industry – CAIL’s �� COVER FURNACES �� company. �� - 1849 creation of « DENAIN-ANZIN » company �� - 1949 birth of Usinor (Union Sidérurgique du Nord de la �� France), following the merger of « DENAIN-ANZIN » with the �� ≤�� north-east Steel company (Forges et Aciéries du Nord et de �� l’Est) Usinor is now part of Arcelor Mittal group. �� - Early 20th Century, Denain’s economy is largely based �� on the steel industry. It is where the fi rst broad strip train is �� built and used. Denain is then nicknamed the «smoking town» �� due to USINOR’s high furnaces. In fact a fi fth one will later be �� added in 1958. It is then France’s greatest and most up to date �� installation. �� - 70’s the economic crisis gives rise to mass �� redundancy in the steel industry. �� - 1980 Usinor stops its high furnaces. �� CONTROLS - January 1987 creation of « La Générale de Traitement des Métaux » in place of Fives Cail former buildings. �� - 1992 Mr Christian HOFFMANN buys off « La Générale de Traitement des Métaux » and it becomes �� La GTM France. �� - 2004 LA GTM France moves to its present location in DENAIN’s industrial area of Bellevue. It �� represents a total built surface of 70,000 m² including 12,000 m² covered and 4,000 m² stocking area. La GTM Qualitätsstähle in Germany off ers a link between the plant and its German customers. Nowadays, with 15 years worth of experience and research, la GTM France has become the leader in heat treatment for steel bars and tubes, carbon and alloys. La GTM France thanks to its innovations and investments plan can meet its customer’s ever increasing specialized needs.

�� ANCHORAGE AND PRESTRESSED TIES �� For products usually dedicated to building industry : TORSION BARS/THREADED TIES HD (Heavy Duty) for high and �� underground building, civil engineering. DUCTILES AND ELASTICAL HTSR® et HSA® BARS �� Tensile Yield Impact value KV (J) �� Modulus of Grade Strength Strength Elongation % �� Elasticity (N/mm²) (N/mm²) +20°C 0°C -20°C �� HSA 1070 870 12 205 000 50 �� HSA® + 1070 870 12 205 000 50 30 20 �� HTSR® 1200 1050 10 205 000 50 30 20 ��. HEAT TREATMENT COLD FINISHING We also carry different operations after heat treatment such as straightening, peeling, sawing or control. PRESENTATION HISTORY For semi products dedicated to mechanical industries and Forge : automobile, railway, mechanical engineering industries, agricultural material, civil engineering, prestressed ties. �� a GTM France is located in DENAIN, the main city of the �� L Valenciennes mining area. Mines were exploited there GAS FURNACE REMOVABLE LOW FREQUENCY �� as Eearly as 1826. �� - 1835 Denain’s fi rst railway is established. �� AND MOBILE INDUCTION LINE �� - 1840 development of the heavy steel industry – CAIL’s �� COVER FURNACES �� company. �� - 1849 creation of « DENAIN-ANZIN » company �� - 1949 birth of Usinor (Union Sidérurgique du Nord de la �� France), following the merger of « DENAIN-ANZIN » with the �� ≤�� north-east Steel company (Forges et Aciéries du Nord et de �� l’Est) Usinor is now part of Arcelor Mittal group. �� - Early 20th Century, Denain’s economy is largely based �� on the steel industry. It is where the fi rst broad strip train is �� built and used. Denain is then nicknamed the «smoking town» �� due to USINOR’s high furnaces. In fact a fi fth one will later be �� added in 1958. It is then France’s greatest and most up to date �� installation. �� - 70’s the economic crisis gives rise to mass �� 141 to 343 mm, length : 14,8 meters. redundancy in the steel industry. �� - 1980 Usinor stops its high furnaces. �� CONTROLS - January 1987 creation of « La Générale de Traitement des Métaux » in place of Fives Cail former buildings. �� - 1992 Mr Christian HOFFMANN buys off « La Générale de Traitement des Métaux » and it becomes �� La GTM France. �� - 2004 LA GTM France moves to its present location in DENAIN’s industrial area of Bellevue. It �� represents a total built surface of 70,000 m² including 12,000 m² covered and 4,000 m² stocking area. La GTM Qualitätsstähle in Germany off ers a link between the plant and its German customers. Nowadays, with 15 years worth of experience and research, la GTM France has become the leader in heat treatment for steel bars and tubes, carbon and alloys. La GTM France thanks to its innovations and investments plan can meet its customer’s ever increasing specialized needs.

PRESENTATION HISTORY HEAT TREATMENT COLD FINISHING We also carry different operations after heat treatment such as straightening, peeling, sawing or control. PRESENTATION HISTORY For semi products dedicated to mechanical industries and Forge : automobile, railway, mechanical engineering industries, agricultural material, civil engineering, prestressed ties. �� a GTM France is located in DENAIN, the main city of the �� L Valenciennes mining area. Mines were exploited there GAS FURNACE REMOVABLE LOW FREQUENCY �� as Eearly as 1826. �� - 1835 Denain’s fi rst railway is established. �� AND MOBILE INDUCTION LINE �� - 1840 development of the heavy steel industry – CAIL’s �� COVER FURNACES �� company. �� - 1849 creation of « DENAIN-ANZIN » company �� - 1949 birth of Usinor (Union Sidérurgique du Nord de la �� France), following the merger of « DENAIN-ANZIN » with the �� ≤�� north-east Steel company (Forges et Aciéries du Nord et de �� l’Est) Usinor is now part of Arcelor Mittal group. �� - Early 20th Century, Denain’s economy is largely based �� on the steel industry. It is where the fi rst broad strip train is �� built and used. Denain is then nicknamed the «smoking town» �� due to USINOR’s high furnaces. In fact a fi fth one will later be �� added in 1958. It is then France’s greatest and most up to date �� installation. �� - 70’s the economic crisis gives rise to mass �� redundancy in the steel industry. �� - 1980 Usinor stops its high furnaces. �� CONTROLS - January 1987 creation of « La Générale de Traitement des Métaux » in place of Fives Cail former buildings. �� - 1992 Mr Christian HOFFMANN buys off « La Générale de Traitement des Métaux » and it becomes �� La GTM France. �� - 2004 LA GTM France moves to its present location in DENAIN’s industrial area of Bellevue. It �� represents a total built surface of 70,000 m² including 12,000 m² covered and 4,000 m² stocking area. La GTM Qualitätsstähle in Germany off ers a link between the plant and its German customers. Nowadays, with 15 years worth of experience and research, la GTM France has become the leader in heat treatment for steel bars and tubes, carbon and alloys. La GTM France thanks to its innovations and investments plan can meet its customer’s ever increasing specialized needs.

� �� A23 �� A2 E19 ��

�� E19 A2

��

�� Rue des Coopérateurs – Zone de Bellevue - BP 20103 – 59722 DENAIN CEDEX – France Tél : +33 (0)3 27 31 00 00 – Fax : + 33 (0)3 27 31 47 16 - [email protected]

Kontakt in Deutschland: GTM Qualitätsstähle Import-Export GmbH - Durchholzer Str. 140 - D-58456 Witten Tel.: +49 (0)23 02 / 973 00-0 - Fax: +49 (0)23 02 / 973 00-30 - [email protected] ��

�� www.lagtm.com Issued in March 2009 �� REFERENCES �� Sales Manager : Alexandre VERISSIMO �� Legal status : SAS (French linked complagny) ��

� �� A23 �� A2 E19 ��

�� E19 A2

��

�� Rue des Coopérateurs – Zone de Bellevue - BP 20103 – 59722 DENAIN CEDEX – France Tél : +33 (0)3 27 31 00 00 – Fax : + 33 (0)3 27 31 47 16 - [email protected]

Kontakt in Deutschland: GTM Qualitätsstähle Import-Export GmbH - Durchholzer Str. 140 - D-58456 Witten Tel.: +49 (0)23 02 / 973 00-0 - Fax: +49 (0)23 02 / 973 00-30 - [email protected] ��

�� www.lagtm.com Issued in March 2009