Self Contained 2260 Two-Way Log Splitter

Total Page：16

File Type：pdf, Size：1020Kb

Self Contained 2260 Two-Way Log Splitter With a cycle time between 4-6 seconds the 2260 Split-Fire log splitter is one of the fastest log splitters found on the market today! Its compact design makes it the perfect wood splitting companion for property owners splitting 50 cords of wood per year or less. All Split-Fire log splitters feature the 2-way splitting action from the knife that splits wood in both directions. Quality Built for High performance! Split-Fire log splitters give you trouble free log splitting for years to come! ModelFrame 2260 5" x 5" steel tube Overall Width 40" Log Capacity 18"–20" diameter Overall Length 80" Tonnage 16 tons splitting force Overall Height 34" Production Volume 50 cord per year or Weight 380 lbs less Cycle Speed 4-6 seconds Bed Height 23" Power Source GC 6.0 hp Honda Knife Height (+/- 8" 1/4") Pump 11 GPM low pressure Cylinder Size 2.75" x 24" 2.7 GPM high pressure Reservoir 10.5 L Tire Size 4.80" x 8" Stroke Length 24" Standard Hitch Size 2" ball coupler Split-Fire Sales Inc. 285633 Airport Rd. Norwich, Ontario Canada N0J 1P0 P: (519) 468-3647 P: (877) 548-3473 Both ends of each log should be cut as square as possible to help F: (877) 256-9131 prevent log from riding out of splitter. E: [email protected] Never place hands or feet between log and splitting wedge or between log and ram during forward or reverse stroke. Wear close fitting, tucked in clothing when operating a wood chipper shredder. You should wear gloves that do not have cuffs, pants without View Map cuffs and slip resistant footwear. Keep your hands and feet out of the in-feed hopper. Read and print all of our safety recommendations....

Copy Link

Recommended publications

Wood Identification and Chemistry' Covers the Physicalproperties and Structural Features of Hardwoods and Softwoods
11 DOCUMENT RESUME ED 031 555 VT 007 853 Woodworking Technology. San Diego State Coll., Calif. Dept. of Industrial Arts. Spons Agency-Office of Education (DHEA Washington, D.C. Pub Date Aug 68 Note-252p.; Materials developed at NDEA Inst. for Advanced Studyin Industrial Arts (San Diego, June 24 -Au9ust 2, 1968). EDRS Price MF -$1.00 He -$13.20 Descriptors-Curriculum Development, *Industrial Arts, Instructional Materials, Learning Activities, Lesson Plans, Lumber Industry, Resource Materials, *Resource Units, Summer Institutes, Teaching Codes, *Units of Study (Sublect Fields), *Woodworking Identifiers-*National Defense Education Act TitleXIInstitute, NDEA TitleXIInstitute, Woodworking Technology SIX teaching units which were developed by the 24 institute participantsare given. "Wood Identification and Chemistry' covers the physicalproperties and structural features of hardwoods and softwoods. "Seasoning" explainsair drying, kiln drying, and seven special lumber seasoning processes. "Researchon Laminates" describes the bending of solid wood and wood laminates, beam lamination, lamination adhesives,. andplasticlaminates."Particleboard:ATeachingUnitexplains particleboard manufacturing and the several classes of particleboard and theiruses. "Lumber Merchandising" outhnes lumber grades andsome wood byproducts. "A Teaching Unitin Physical Testing of Joints, Finishes, Adhesives, and Fasterners" describes tests of four common edge pints, finishes, wood adhesives, and wood screws Each of these units includes a bibhography, glossary, and student exercises (EM) M 55, ...k.",z<ONR; z _: , , . "'zr ss\ ss s:Ts s , s' !, , , , zs "" z' s: - 55 Ts 5. , -5, 5,5 . 5, :5,5, s s``s ss ' ,,, 4 ;.< ,s ssA 11111.116; \ ss s, : , \s, s's \ , , 's's \ sz z, ;.:4 1;y: SS lza'itVs."4,z ...':',\\Z'z.,'I,,\ "t"-...,,, `,.
[Show full text]
Competition Rules
2021 New Jersey State Fair Lumber Jack / Lumber Jill Competition Sponsored by Montague Tools & Supply Company Saturday August 7th 2021 6:00pm in Outdoor Arena Contacts: Mike Lacken 973-670-5220 Bill Oswald 973-948-6400 ext 20 email [email protected] Competition Rules DUE TO INCREASE IN PARTIPANTS ALL PARTNER EVENTS ARE LIMITED TO ONE PARTNER PER COMPETITOR (NO EXEPTONS) JACK AND JILL EVENTS WILL BE AWARDED PRIZES ONLY. NO POINTS IN ORDER TO KEEP OVERALL SCORES FAIR. WOOD CHOPPING 1. Eye protection required 2. No restrictions are placed on type and size of axe 3. Chopping Blocks will be provided (First come first serve) LOG ROLLING CONTEST 1. Eye protection required. 2. Two-person team must propel a log resting against two stakes in the ground a distance of 30 feet to a second set of stakes using cant hooks or peavey’s only. The log must contact both stakes at the far end of the field at the same time and must then come to rest against the first pair to finish. No hands and feet may be used. TWO-PERSON CROSSCUT SAW CONTEST 1. Eye protection required. 2. One cut down a 8”x 8” square log 3. Divisions are Men /Women/ Jack & Jill WOOD SPLITTING CONTEST 1. Eye protection required. 2. Each contestant will be given three or four pieces of wood, each approximately 2’ long, with a 3” dot painted in the center. Each piece must be split into 4 pieces, each having a portion of the dot on it. 3. Contestants will supply their own splitting mauls.
[Show full text]
Roof Framing Connections in Conventional
U.S. Department of Housing and Urban Development Office of Policy Development and Research RROOOOFF FFRRAAMMIINNGG CCOONNNNEECCTTIIOONNSS IINN CCOONNVVEENNTTIIOONNAALL RREESSIIDDEENNTTIIAALL CCOONNSSTTRRUUCCTTIIOONN PATH (Partnership for Advanced Technology in Housing) is a new private/public effort to develop, demonstrate, and gain widespread market acceptance for the “Next Generation” of American housing. Through the use of new or innovative technologies the goal of PATH is to improve the quality, durability, environmental efficiency, and affordability of tomorrow’s homes. PATH is managed and supported by the Department of Housing and Urban Development (HUD). In addition, all Federal Agencies that engage in housing research and technology development are PATH Partners, including the Departments of Energy and Commerce, as well as the Environmental Protection Agency (EPA) and the Federal Emergency Management Agency (FEMA). State and local governments and other participants from the public sector are also partners in PATH. Product manufacturers, home builders, insurance companies, and lenders represent private industry in the PATH Partnership. To learn more about PATH, please contact: 451 7th Street, SW Suite B 133 Washington, DC 20410 202-708-5873 (fax) e-mail: [email protected] website: www.pathnet.org Visit PD&R's Web Site www.huduser.org to find this report and others sponsored by HUD's Office of Policy Development and Research (PD&R). Other services of HUD USER, PD&R's Research Information Service, include listservs; special interest, bimonthly publications (best practices, significant studies from other sources); access to public use databases; hotline 1-800-245-2691 for help accessing the information you need. RROOOOFF FFRRAAMMIINNGG CCOONNNNEECCTTIIOONNSS IINN CCOONNVVEENNTTIIOONNAALL RREESSIIDDEENNTTIIAALL CCOONNSSTTRRUUCCTTIIOONN Prepared for The U.S.
[Show full text]
A Force of Nature Since 1781
16 17 A FORCE OF NATURE SINCE 1781. www.ochsenkopf.com MYTH GERMANY’S OLDEST AXE FORGE OCHSENKOPF stands for perfection and safety in forestry and carpentry tools. Since the Fahlefeld Bros. established the firm in 1781, the best steel with the best cut has been forged to a maximum quality in the Remscheid factory. An OCHSENKOPF axe stands for top-grade craftsmanship. It is still the pride of the traditional tool industry in “Bergisches Land”. A brand like a myth. Axe-making has been developed over time into a highly modern industrial undertaking. Quality and service have top priority. OCHSENKOPF tools are preferably manufactured of C60 steel. One of its features is its incredible toughness, which guarantees long tool life. Only high-quality wood is used in tool shaft production. Hickory is a high-grade and extremely break-proof wood. Instead of being sharpened to a knife edge, OCHSENKOPF tools are honed to a cambered edge, which results in longer edge life. So much more could be said about the brand considered by professionals to be the be-all and end-all. But basically you have to experience OCHSENKOPF. When working with wood. In the dark, deep forest. 3 FORGING COMPETENCE MANUFACTURE OF AN AXE Out of the forge and into the forest The forged blanks are sawn off from rolled Permanent marking by means of a stamp bearing the C60 tempering steel. manufacturer’s symbol. Tempering (hardening and tempering) the cutting edge ensures hardness and toughness. The red-hot blank is shaped on a forging Sand-blasting the surface.
[Show full text]
The Log Splitter You Will Enjoy Using
THE LOG SPLITTER YOU WILL ENJOY USING. STRYKER log splitters offer quality workmanship second to none. Because of their unique design and manufactured finish, they require much less power to split wood while offering much greater operator safety. The design of the STRYKER log splitter allows operators to split wood both ways, an appealing feature if you are looking for a fast and simple way to get your log piles split. CentralBoiler.com EVERY STRYKER LOG SPLITTER IS... A 2-WAY LOG SPLITTER BUILT TO LAST EFFICIENT BUILT STRONG All STRYKER log splitters feature A standard splitter has very little The STRYKER design lets the butt of Standard splitters have a dangerous the hallmark 2-way splitting action, bearing area, which is often steel each block “bend” around the stop, bending movement. There is no splitting on both the forward or brass on steel. This makes edges allowing more wood to be split so bending movement in the STRYKER and reverse stroke, and doubling sharp and causes power-robbing much easier. log splitter because the cylinder is productivity. friction. The STRYKER log splitter has mounted in the center of the frame, four replaceable plastic sliders. One pushing directly down the frame. square foot per side gives a huge bearing area and lasts for years. SELF-CONTAINED LOG SPLITTERS Durable...easy to operate...and a very efficient design. STRYKER log splitters are highway towable and have been proven as the preferred log splitter because they operate for many trouble-free years. Model shown with optional Log Lifter The 3255HT was originally designed for the rental industry.
[Show full text]
Measuring Wood Moisture & Drying Time for Hardwood Tree Species
//////////// extension.umd.edu ///////////////////////////////////////////////////////////////////////////////////////////////////////////// FS—1074 | November 2018 //////////// Measuring Wood Moisture & Drying Time for Hardwood Tree Species Why Measure Wood Moisture The moisture content of wood burned in a wood stove directly impacts the efficiency and emissions. Wood burning efficiency is best when moisture is less than 20% and higher moisture levels reduce the ease and efficiency of burning. Moisture in wood reduces heat output because much of the energy is used to burn off the water in the wood. The burning process with wet wood produces smoke that contains soot which causes deposits Figure 1. Fresh cut oak wood on left and dried oak on in your stovepipe, increasing the chance of a chimney right with wood splitting at ends and discoloration. fire. Smoke is basically unburned wood and includes particulates which means higher emissions and air pollution. Dry wood (20% moisture) burns hot and will provide a long burn which produces little smoke, which translates into low emissions. This will reduce conflicts with neighbors and communities where smoke from wood stoves has become a major problem. How to Measure Wood Moisture Figure 2. Moisture meters available for about $30. The efficiency and emissions of wood stoves is directly General Tools & Instruments on left and A.W Perkins impacted by the moisture content of the firewood used. moisture meter on right. Conventional wisdom states that harvested wood should seasoned. One technique is to look at the splitting, called be split, stacked, covered and allowed to dry for about 6- “checking” of the wood on the ends as an indicator of 12 months after it is cut, or until an internal moisture proper drying (Figure 1).
[Show full text]
Ready for Duty Serious Machinery for Serious Tasks
ready for duty Serious machinery for serious tasks Contents Palax firewood processors with a circular saw The key benefits of a circular saw are speed, freedom of maintenance and a small amount of oilfree sawdust generated. The hard-metal blade cuts the log reliably and quickly. Long sharpening intervals increase the effective working time. Even the splitting blade with quick-release can be changed in a matter of seconds. 4 c1000 5 c900 6 c750 7 c700 C O M B I Palax firewood processors with a chain saw The chain saw offers a greater cutting diameter compared with the hard-metal blade machines in the same category. They are at the very best, when the thickness of the logs varies a great deal. All the chain saws are fitted with an automatic chain lubrication system and quick-release of the splitting wedge. 8 Ks 45s 9 Ks 40s 10 d360 11 D270 A C T I V E 2 accessories Easily load logs to the firewood processor by using the range of Palax log decks. After cutting and splitting, Palax Roller and Cleaner ensure that the wood is clean and will dry quickly. 12 mega/midi/deck log decks 14 Roller/cleaner firewood cleaners Palax’s dedicated focus is on the designing, manufacturing and development of firewood processors. Thanks to our experience spanning over half a century, we can really manage this job, pledging that each seam and detail is in order. 3 Available models: 1000 1000 mm 15 kW/ 2/6 25–55 cm 35 A Option 2/0, 2/4, Palax Optimi process 2/8, 2/12 Max.
[Show full text]
Machining and Related Characteristics of United States Hardwoods
Machining and Related Characteristics of United States Hardwoods \ Teclmicai IÍMIM^IíU íI>. Forest Service Machining and Related Characteristics of United States Hardwoods By E. M. DAVIS, Wood Technologist, Forest Products Laboratory (Maintained at Madison, Wis., in cooperation with the University of Wisconsin) Technical Bulletin No. 1267 U.S. DEPARTMENT OF AGRICULTURE • FOREST SERVICE Washington, D.C. August 1962 For sale by the Superintendent of Documents, U.S. Government Printing Office Washington 25, D.C. - Price 35 cents CONTENTS Page Introduction 1 Machining properties 3 Planing 3 Shaping 20 Turning 23 Boring 26 Mortising 31 Sanding 35 Related properties 39 Steam bending 39 Nail splitting 43 Screw splitting 45 Variation in specific gravity 49 Number of annual rings per inch 53 Cross grain 53 Shrinkage 56 Warp 56 Minor imperfections of hardwoods 59 Change of color in hardwoods 63 Summary 64 This bulletin supersedes Technical Bulletin No. 824, Machining and Related Characteristics of Southern Hardwoods. HI INTRODUCTION Machining properties relate to the behavior of wood when planed, shaped, turned, or put through any other standard woodworking operation. Wood in general is easy to cut, shape, and fasten. For some purposes the difference between woods in machinability is negli- gible ; for other uses, however, as in furniture and fixtures, the smooth- ness and facility with which woods can be worked may be the most important of all properties. Unless a wood machines fairly well and with moderate ease, it is not economically suitable for such uses re- gardless of its other virtues. Thus, along with specific gravity and tendency to split and warp, machinability is of first importance to the woodworker.
[Show full text]
Automatic Firewood Processor Master’S Thesis
Tallinn University of Technology Department of Mechatronics Chair of Mechanosystem Components MHE70LT Kunnar Loi Automatic firewood processor Master’s Thesis Author applying for master’s sciences of technical academic degrees Tallinn 2016 AUTHOR'S DECLARATION I hereby declare that this thesis is the result of my independent work. On the basis of materials not previously applied for an academic degree. All materials used in the work of other authors are provided with corresponding references. The work was completed ................................................ guidance “.......”....................201….a. The author .............................. signature The work meets the requirements for a master's work. “.......”....................201….a. Supervisor ............................. signature Permit to defense ................................. curriculum defense superior “.......”....................201… a. ............................. signature 1 TUT Department of Mechatronics Chair of Mechanosystem Components MASTER’S THESIS SHEET OF TASK’S Year 2016, semester 4 Student: Kunnar Loi, MAHM 143861 (name, cod) Curricula: MAHM 02/13 Speciality: Mechatronics Supervisor: Professor, Priit Põdra (position, name) Advisers: ……………………………………….. (name, position, phone) MASTER’S THESIS TOPIC: (in English) Automatic firewood processor (in Estonian) Automaatne halumasin Thesis tasks to be completed and the timetable: Nr Description of tasks Timetable 1. Searching for literature and material related to the topic. Searching for 01.03.2016 similar solutions and products. 2. Divide the machine into smaller modules or mechanisms, analyze and 20.03.2016 propose a solution for each module. 3. Compose the final machine from sub modules. 02.04.2016 4. Build the first prototype and assess its capabilities. 01.05.2016 5. Finalize the thesis. 19.05.2016 Solved engineering and economic problems: Developing a prototype for automatic firewood processor. During the development the machine is divided into smaller modules.
[Show full text]
Quality Product, Ergonomic, Ecological and Safe to Use. Wedge Axes
www.logmatic.com Quality product, Using Wedge axe Wedge axe Splitting basket LM-800 Splitting basket ergonomic, LM-250 + baseplate LM-1000 1 Select the striking point with Durable and modern in design, the Splitting Basket is part of System ecological care by placing the wedge Logmatic. The Splitting Basket keeps the wood to be split upright The Splitting Base is at its best when used together with the Splitting axe’s wedge-shaped point Specifications: when being split, and this makes the job of splitting easy and safe. Basket. The Base is made of plywood and provides an even, sturdy foundation on which to split firewood. The idea is to connect the and safe to use. precisely where you want Weight: 5.5 kg The Splitting Basket also serves the purpose of the traditional firewood basket when carrying the split wood into the house or the Splitting Base to the Splitting Basket when splitting firewood and then to split the block of wood. Length min./max: 105/155 cm Begin splitting the block of woodshed and keeping it tidy next to the fireplace. to disconnect it when the wood has been split and the pieces are Hand grips: Rubber Decades of design and experience in the field of wood harvest- wood from the edges – it’s ready to be carried into the house or the woodshed. This product can ing and forestry machinery back up Logmatic products. Logmatic easier that way. Blade guard: Yes Related products: also be used as a base without the Splitting Basket when splitting products received international acclaim at a forestry trade fair Stopper for striking bar: Yes Wedge axe LM-150, LM-250 firewood.
[Show full text]
Wood Splitters Industry Safety Standard
WOOD SPLITTERS INDUSTRY SAFETY STANDARD SEPTEMBER 2008 making a difference New South Wales Government Disclaimer This publication may contain occupational health and safety and workers compensation information. It may include some of your obligations under the various legislations that WorkCover NSW administers. To ensure you comply with your legal obligations you must refer to the appropriate legislation. Information on the latest laws can be checked by visiting the NSW legislation website (www.legislation.nsw.gov.au) or by contacting the free hotline service on 02 9321 3333. This publication does not represent a comprehensive statement of the law as it applies to particular problems or to individuals or as a substitute for legal advice. You should seek independent legal advice if you need assistance on the application of the law to your situation. © WorkCover NSW CONTENTS PAGE 1. INTRODUCTION 2 2. SCOPE 3 3. DEFINITIONS 4 4. RISK ASSESSMENT AND CONTROL 5 5. DESIGN 7 5.1 Guarding 7 5.2 Wood holding devices 7 5.3 Retention of instructions 8 5.4 Stability 8 5.5 Controls and stop devices 8 5.6 Electrical safety 8 5.7 Hydraulic systems 8 5.8 Safety signs 9 5.9 Foot guard (vertical wedge splitter at ground level only) 9 6. MANUFACTURERS 10 6.1 Manufacturer’s responsibilities 10 6.2 Manufacturer’s instructions 10 7. SUPPLIERS AND HIRERS 11 7.1 General responsibilities 11 7.2 Provision of information 11 7.3 Practical safety information 11 8. USE 12 8.1 Pre-purchase 12 8.2 Safety instructions 12 8.3 Competence 12 8.4 Electrical 13 8.5 Use 13 8.6 Manual handling 13 8.7 Personal protective equipment 13 8.8 Deactivating the wood splitter 13 8.9 Transportation 13 8.10 Inspection, maintenance and repair 14 8.11 Modifications 14 APPENDIX A – EXAMPLE SAFETY SIGNS 15 APPENDIX B – PRE-PURCHASE CHECKLIST 16 APPENDIX C – FURTHER INFORMATION 19 1 1.
[Show full text]
Moisture Content Seasoning Wood Equilibrium
Moisture Content Knowing the exact moisture content of the wood you are working with is very important. Using wood that is not at the appropriate moisture content can result in warping, swelling, cupping, splitting, or loose joints in your finished work. Over 50% of a living tree’s weight is moisture. This moisture content is expressed as a percentage of its “oven-dry weight”. This means that to determine the moisture content of a piece of wood you must first weigh it, and then oven-dry it until it no longer loses weight. This oven-dry weight is then subtracted from the initial wet weight and the difference is divided by the oven-dry weight. (wet weight – dry weight/dry weight X 100 = % moisture) Although this method is most accurate, it is not practical for everyday use. There are electronic moisture meters which will give instantaneous readings, accurate within 1% in the critical 6 to 12% range. Moisture in wood is contained both within its cell cavities and in the cell walls. As wood dries, moisture first leaves the cell cavities (free moisture). When the cells are empty, but the cell walls are still saturated (bond moisture), it is said the wood has reached its “fibre saturation point”. This is about 30% for most woods. Wood will not change dimensionally until it is dried beyond the fibre saturation point. As the moisture is removed from the cell walls, the cells begin to shrink. Maximum shrinkage takes place in the wood as the wood dries from 20% down to 10%. Seasoning Wood The object of drying or “seasoning” wood is to bring the moisture content of the wood down to an acceptable level quickly, but gently, to avoid distortion.
[Show full text]