Examples of Disciplines Help Guide
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Undergraduate Handbook
Undergraduate Handbook Fall 2018 Introduction This handbook provides a summary of information taken from various University of Rochester publications. Also, it includes program-specific details that are of importance to Optics students. This manual contains information regarding changes to the Optics curriculum and should be read carefully and in its entirety. Policies and procedures that apply to the entire university student body take precedence over the policies and procedures contained in this handbook. This handbook is updated to reflect the curriculum changes that are effective as of Fall 2018. Students will follow the curriculum that was in effect at the time when the major or minor was declared. Requirements for Admission to The Institute of Optics Students normally apply for admission to The Institute of Optics during the second semester of their sophomore year. The entrance criteria for the B.S. Degree in Optics and the B.S. degree in Optical Engineering are the same. To be formally admitted tothe major, students will need to satisfy ALL of the following requirements. Students must: 1. Have an overall grade point average (GPA) of at least 2.0 (C) and not be on probation. 2. Have an average GPA of at least 2.0 (C) in PHY 121(P)/122(P)/123 or PHY 141/142/143 (or in comparable courses taken elsewhere). PHY 113 is an acceptable substitute for PHY121. 3. Have an average GPA of at least 2.0 (C) in MTH 161/162/164 or MTH 141/142/143/164 (or in comparable courses taken elsewhere). 4. Have an average GPA of at least 2.0 (C) for all sophomore-level Optics core courses (OPT 241, OPT 201, OPT 261, OPT 202, and OPT 287), with NO grade below a C- for any course and no more than ONE grade of C- in any of these five courses. -
Engineering Physics
COLLEGE OF ENGINEERING Engineering Physics WHY ENGINEERING PHYSICS? graduates have gone on to become the CEO Engineering is about the way things work. of Eastman Kodak Co., work as acoustical Physics is about why things work the way engineers for Disney, work for the CIA, thrive they do. By combining the two, engineering in the financial sector, work in nuclear physics students are able to satisfy their engineering at Seabrook Nuclear Power Plant, curiosity and ultimately gain a deeper manage the power flow for northern New understanding of the engineering problems England, work as radiation physicists at medical centers, and become high-level UM aine’s ADVANTAGE they are working to solve. executives at SanDisk and Avis. • Professors with Ph.D. degrees, not graduate WHY STUDY ENGINEERING PHYSICS AT UMAINE? RESEARCH OPPORTUNITIES students, teach classes UMaine engineering physics was the first UMaine engineering physics students are able • State-of-the-art teaching and accredited engineering physics program in to take advantage of a myriad of research research facilities the world. Currently, it is one of only 20 programs in the U.S. and the only opportunities as undergraduates — some as • Small, student-centered accredited one in New England. e early as their freshman year. Many work classes Department of Physics and Astronomy in closely with scientists in UMaine’s Laboratory for Surface Science and Technology, which is • Opportunities to do conjunction with the College of Engineering undergraduate research offers bachelor’s and master’s degrees in internationally known for cutting-edge alongside faculty engineering physics. e curriculum research with sensors. -
B.Sc. Mechatronics Specialization: Photonic Engineering
Study plan for: B.Sc. Mechatronics Specialization: Photonic Engineering Faculty of Mechatronics Study plan for reference only; may be subject to change. Semester 1 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Patents and Intelectual Property 30 2 Optics and Photonics Applications 30 15 3 Calculus I 30 45 7 Algebra and Geometry 15 30 4 Engineering Graphics 15 30 2 Materials 30 2 Computer Science I 30 30 6 Engineering Physics 30 30 4 Total ECTS 30 Semester 2 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Economics 30 2 Elective Lecture 1/Virtual and 30 3 Augmented Reality Calculus II 30 30 5 Engineering Graphics ‐ CAD 30 2 Computer Science II 15 15 5 Mechanics I i II 45 45 6 Mechanics of Structures I 30 15 4 Electric Circuits I 30 15 3 Total ECTS 30 1 Study Plan for B.Sc. Mechatronics (Spec. Photonic Engineering) Semester 3 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 0 Foreign Language 60 4 Elective Lecture 2/Introduction to 30 3 MEMS Calculus III 15 30 6 Mechanics of Structures II 15 15 4 Manufacturing Technology I 30 4 Fine Machine Design I 15 30 3 Electric Circuits II 30 3 Basics of Automation and Control I 30 15 4 Total ECTS 31 Semester 4 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Foreign Language 60 4 Elective Lecture 3/Photographic 30 3 techniques in image acqusition Elective Lecture 4 30 3 /Enterpreneurship Optomechatronics 30 30 5 Electronics I 15 15 2 Electronics II 15 1 Fine Machine Design II 15 15 3 Manufacturing Technology 30 2 Metrology 30 30 4 Total ECTS 27 Semester 5 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 0 Foreign Language 60 4 Marketing 30 2 Elective Lecture 5/ Electric 30 2 2 Study Plan for B.Sc. -
Convergence: Facilitating Transdisciplinary Integration of Life Sciences, Physical Sciences, Engineering, and Beyond
This PDF is available from The National Academies Press at http://www.nap.edu/catalog.php?record_id=18722 Convergence: Facilitating Transdisciplinary Integration of Life Sciences, Physical Sciences, Engineering, and Beyond ISBN Committee on Key Challenge Areas for Convergence and Health; Board on 978-0-309-30151-0 Life Sciences; Division on Earth and Life Studies; National Research Council 156 pages 6 x 9 PAPERBACK (2014) Visit the National Academies Press online and register for... Instant access to free PDF downloads of titles from the NATIONAL ACADEMY OF SCIENCES NATIONAL ACADEMY OF ENGINEERING INSTITUTE OF MEDICINE NATIONAL RESEARCH COUNCIL 10% off print titles Custom notification of new releases in your field of interest Special offers and discounts Distribution, posting, or copying of this PDF is strictly prohibited without written permission of the National Academies Press. Unless otherwise indicated, all materials in this PDF are copyrighted by the National Academy of Sciences. Request reprint permission for this book Copyright © National Academy of Sciences. All rights reserved. Convergence: Facilitating Transdisciplinary Integration of Life Sciences, Physical Sciences, Engineering, and Beyond Prepublication Copy Subject to Further Editorial Revisions Convergence Facilitating Transdisciplinary Integration of Life Sciences, Physical Sciences, Engineering, and Beyond Committee on Key Challenge Areas for Convergence and Health Board on Life Sciences Division on Earth and Life Studies THE NATIONAL ACADEMIES PRESS Washington, D.C. www.nap.edu Copyright © National Academy of Sciences. All rights reserved. Convergence: Facilitating Transdisciplinary Integration of Life Sciences, Physical Sciences, Engineering, and Beyond THE NATIONAL ACADEMIES PRESS 500 Fifth Street, NW Washington, DC 20001 NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. -
Outline of Science
Outline of science The following outline is provided as a topical overview of • Empirical method – science: • Experimental method – The steps involved in order Science – systematic effort of acquiring knowledge— to produce a reliable and logical conclusion include: through observation and experimentation coupled with logic and reasoning to find out what can be proved or 1. Asking a question about a natural phenomenon not proved—and the knowledge thus acquired. The word 2. Making observations of the phenomenon “science” comes from the Latin word “scientia” mean- 3. Forming a hypothesis – proposed explanation ing knowledge. A practitioner of science is called a for a phenomenon. For a hypothesis to be a "scientist". Modern science respects objective logical rea- scientific hypothesis, the scientific method re- soning, and follows a set of core procedures or rules in or- quires that one can test it. Scientists generally der to determine the nature and underlying natural laws of base scientific hypotheses on previous obser- the universe and everything in it. Some scientists do not vations that cannot satisfactorily be explained know of the rules themselves, but follow them through with the available scientific theories. research policies. These procedures are known as the 4. Predicting a logical consequence of the hy- scientific method. pothesis 5. Testing the hypothesis through an experiment – methodical procedure carried out with the 1 Essence of science goal of verifying, falsifying, or establishing the validity of a hypothesis. The 3 types of -
Department of Chemical and Biomolecular Engineering 1
Department of Chemical and Biomolecular Engineering 1 Department of Chemical and Biomolecular Engineering Vasan Venugopalan, Department Chair 6000 Interdisciplinary Science & Engineering Bldg. (ISEB) 949-824-6412 http://www.eng.uci.edu/dept/cbe (http://www.eng.uci.edu/dept/cbe/) The Department of Chemical and Biomolecular Engineering offers the B.S. in Chemical Engineering, and the M.S. and Ph.D. in Chemical and Biomolecular Engineering. Chemical Engineering uses knowledge of chemistry, mathematics, physics, biology, and humanities to solve societal problems in areas such as energy, health, the environment, food, clothing, materials, and sustainability and serves a variety of processing industries whose vast array of products include chemicals, petroleum products, plastics, pharmaceuticals, foods, textiles, fuels, consumer products, and electronic and cryogenic materials. Chemical Engineering also advances societal goals by developing environmentally conscious and sustainable technologies to meet global challenges. The undergraduate curriculum in Chemical Engineering builds on basic courses in chemical engineering, other branches of engineering, and electives which provide a strong background in humanities and human behavior. Elective programs developed by the student with a faculty advisor may include such areas as applied chemistry, biomolecular engineering, chemical reaction engineering, chemical processing, environmental engineering, materials science, process control systems engineering, and biomedical engineering. • Chemical and -
Recommendations from the Academic Futures Working Group On
Recommendations from the Academic Futures Working Group on Interdisciplinary Education, Research and Creative Works Released to campus October 1, 2019 University of Colorado Boulder Table of Contents I. Background and Philosophy B. Interdisciplinarity, the Public University, and Serving the Public Good C. Campus Perspectives on Interdisciplinarity II. Interdisciplinarity in Teaching and Research A. Bringing Interdisciplinarity Front and Center B. Creating the Continuum of Interdisciplinary Education C. Interdisciplinary Research and Scholarship: Building on our Existing Interdisciplinary Strengths III. Creating sustainability and taking on our challenges IV. Creating a Budgetary Model for Campus that Supports Interdisciplinarity V. Conclusion 1 University of Colorado Boulder Committee Members Jim White, Interim Dean, College of Arts and Sciences (Lead) Waleed Abdalati, Director, CIRES and Professor, Geography, College of Arts and Sciences Max Boykoff, Associate Professor, ENVS/CIRES; Director, Center for Science and Technology Policy Andrew Calabrese, Associate Dean of Graduate Programs and Research, Professor of Media Studies, CMCI Margaret C. Campbell, Provost Professor of Marketing, Leeds School of Business Sharon Collinge, Professor, ENVS, College of Arts and Sciences Jackie Elliott, Associate Professor and Chair, Classics Oliver Gerland, Associate Professor, Theatre & Dance; Interim Director of the Humanities program Larry Levine, Associate Vice Chancellor for IT and CIO, Office of Information Technology Jana Milford, Professor, -
Biochemical Engineering Fundamentals
BIOCHEMICAL ENGINEERING FUNDAMENTALS J.E. BAILEY and a very broad range of applications. The funda University of Houston mentals comprise those particular topics which Houston, Texas 77004 profoundly influence the behavior of man-made or and natural microbial or enzyme reactors. Such D. F. OLLIS biological examples include the dependence of Princeton University enzyme (and thus microbial) activity on substrate Princeton, New Jersey 08540 concentration, pH, temp, rature, and ionic strength, the existence of a small number of im MICROBIAL AND ENZYMATIC activities portant metabolic paths among the multitude of have been an intimate part of man's history. microbial species, the cellular control mechanisms Microbes probably account for greater than ninety for complex internal reaction networks, and percent of all animal mass; their biochemical molecular devices for biological information action contributes significantly to chemical storage and transmittal. Useful topics chosen processes found in agriculture, diseases, digestion, from chemical and engineering sciences are the antibiotic production, food manufacture and energetics of isothermal, coupled reactions; processing, spoilage, sanitation, waste disposal, mixing; transfer of heat and molecular solutes; and marine and soil ecology. Consequently, it is · ideally and imperfectly mixed chemical reactors; remarkable that the study of biochemical processes and filtration. is not an established component of chemical The general character of these fundamentals engineering education. is subsequently -
Biochemistry
BIOCHEMISTRY Fig. 1. Agricultural Chem- istry Building from the southeast, just visible at the left of the picture is the 1939 addition. [series 9/3 Biochemistry, x25-6365] Biochemistry was built to alleviate the severe crowding in agriculture hall in 1912. It was added to in 1939, 1957 and 1984. A further addition is planned for 1996. The building is significant for a number of brilliant scientists ( including Babcock, Elvehjem, Steenbock, Link and De Luca) who worked there. The building was placed on the National Register of Historic Places in 1985. y 1910 agriculture hall was on the path previously followed by science hall, that of spawning myriad disciplines and departments needing space and special accommodations outside the Bparent building. Agricultural engineering, horticulture, plant pathology and agronomy, had already left their cradles in Agriculture Hall and moved into specialized facilities nearby. In his report to the regents in 1909-1910, president Van Hise says: "A consideration of the laboratory space in the central agriculture hall leads Dean Russell to conclude that agricultural chemistry and bacteriology cannot possibly be accommodated for three years longer."1 Dean Russell's report (written in October 1910) shows the magnitude of the space problem. In Agriculture Hall for agricultural chemistry and bacteriology there was lab space for 30 students and locker space for 83 for courses which the sophomore class was required to take. Advanced work had facilities for only four or five. Russell proposed the construction of a fireproof central unit for agri- cultural chemistry, to contain offices, classrooms, a large (350-400 seat) auditorium, and a laboratory wing with space for at least 150 students at a time, and including space for special work and research labs. -
To Undergraduate Studies in Chemistry, Chemical Engineering, and Chemical Biology College of Chemistry, University of California, Berkeley, 2011-12
Guide to Undergraduate Studies in Chemistry, Chemical Engineering, and -2012 Chemical Biology College of Chemistry 2011 University of California, Berkeley Academic Calendar 2011-12 Fall Semester 2011 Tele-BEARS Begins April 11 Monday Fee Payment Due August 15 Monday Fall Semester Begins August 18 Thursday Welcome Events August 22-26 Monday-Friday Instruction Begins August 25 Thursday Labor Day Holiday September 5 Monday Veterans Day Holiday November 11 Friday Thanksgiving Holiday November 24-25 Thursday-Friday Formal Classes End December 2 Friday Reading/Review/Recitation Week December 5-9 Monday-Friday Final Examinations December 12-16 Monday-Friday Fall Semester Ends December 16 Friday Winter Holiday December 26-27 Monday-Tuesday New Year’s Holiday December 29-30 Thursday-Friday Spring Semester 2012 Tele-BEARS Begins October 17, 2011 Monday Spring Semester Begins January 10 Tuesday Fee Payment Due January 15 Sunday Martin Luther King Jr. Holiday January 16 Monday Instruction Begins January 17 Tuesday Presidents’ Day Holiday February 20 Monday Spring Recess March 26-30 Monday-Friday César Chávez Holiday March 30 Friday Cal Day To Be Determined Formal Classes End April 27 Friday Reading/Review/Recitation Week April 30-May 4 Monday-Friday Final Examinations May 7-11 Monday-Friday Spring Semester Ends May 11 Friday Summer Sessions 2012 Tele-BEARS Begins February 6 Monday First Six-Week Session May 21-June 29 Monday-Friday Memorial Day Holiday May 28 Monday Ten-Week Session June 4-August 10 Monday-Friday Eight-Week Session June 18-August -
Chemistry & Medicinal Chemistry
2nd Global Expert Meeting on Chemistry & Medicinal Chemistry April 22-23, 2020 Tokyo, Japan Hosting Organization: Pulsus Group 40 Bloomsbury Way | Lower Ground Floor London, United Kingdom | WC1A 2SE | Tel: +1-408-429-2646 https://chemistry.cmesociety.com Invitation Pulsus Group is glad to announce, 2nd Global Expert Meeting on Chemistry & Medicinal Chemistry (Chemistry 2020) which is going to be held during April 22-23, 2020 at Tokyo, Japan, organized around the theme “Innovation and upgradation in the field of Chemistry and Medicinal Chemistry”. As with all past congresses, Chemistry 2020 fosters collaborations among chemical scientists to improve the quality of life throughout the world. Our outstanding technical program truly represents collaborations among scientists from at least three different countries. The result of such collaborations can only bring improvements in technical development and a better quality of life for all people. Regards Deion sanders Chemistry 2020 Organizing Committee Conference Highlights • Advanced Organic & Inorganic Chemistry • Supramolecular Chemistry • Analytical Chemistry • Marine & Geo Chemistry • Applied Chemistry • Industrial Chemistry • Agricultural Chemistry • Materials Chemistry • Biochemistry • Natural Product Chemistry • Organic and Bio-organic Chemistry • Pharmaceutical Chemistry • Chemical Engineering • Physical Chemistry • Computational Chemistry • Polymer Chemistry • Electrochemistry • Nuclear Chemistry • Green and Sustainable ChemistryPULSUS• Theoretical Chemistry About PULSUS Pulsus -
Electronic Supporting Information Combined X-Ray Crystallographic
Electronic supporting information Combined X-Ray crystallographic, IR/Raman spectroscopic and periodic DFT investigations of new multicomponent crystalline forms of anthelmintic drugs: a case study of carbendazim maleate. Alexander P. Voronin a), Artem O. Surov a), Andrei V. Churakov b), O. D. Parashchuk c), Alexey A. Rykounov d), Mikhail V. Vener*e) a) G.A. Krestov Institute of Solution Chemistry of RAS, Ivanovo, Russia b) N.S. Kurnakov Institute of General and Inorganic Chemistry of RAS, Moscow, Russia c) Faculty of Physics, Lomonosov Moscow State University, Moscow, Russia d) FSUE "RFNC-VNIITF named after Academ. E.I. Zababakhin", Snezhinsk, Russia e) D. Mendeleev University of Chemical Technology, Moscow, Russia *Corresponding author: Mikhail V. Vener, e-mail: [email protected] Table of Contents: Section Page S1. Computational details S2-S4 Table S1 S4 Table S2 S4 Table S3 S5 Table S4 S6 Table S5 S7 Table S6 S7 Figure S1 S8 Figure S2 S8 Figure S3 S9 Figure S4 S10 Figure S5 S10 Figure S6 S11 Figure S7 S11 Figure S8 S12 Figure S9 S12 Figure S10 S13 Figure S11 S13 Figure S12 S14 References S15 S1 S1. Computational details S1.1 Periodic (solid-state) DFT calculations and lattice energy calculation Periodic DFT computations with all-electron Gaussian-type orbitals (GTO) were performed using Crystal17 [1]. The 6-31G** basis set was used. The tolerance on energy controlling the self-consistent field convergence for geometry optimizations and frequency computations was set to 10−10 and to 10−11 Hartree, respectively. The number of points in the numerical first- derivative calculation of the analytic nuclear gradients equals 2.