UNTAR ISBN : 978-602-71459-1-7 FACULTY OF I ENGINEERING

PROCEEDINGS

2nd International Conference on Engineering of ''Urban Engineering for Future Generation'' , 22-23 October 2015

Auditorium M Building, Campus I, Tarumanagara University JI. Letjen. S. Parman No. 1, Jakarta 11440 -

UNTAR Universitas Tarumanagara Published by: Faculty of Engineering, Tarumanagara University

Sponsored by:

~ 0 tbu SUMMARECON PT. TARUMA BHAKTI USAHA ROMAN PT. GLOBAL RANCANG SELARAS BE KASI 1-iospil.

Cl'. PALUGA FAJAR BE Rm IA indomegah cum understand • create • solution PT. NELSINOOKARY A SEJAHTERA SpecialistforAirC:OOditioning&Part www.untar.ac.id/ft/ PROCEEDINGS

2nd International Conference on Engineering of Tarumanagara (ICET)

“Urban Engineering For Future Generation” Jakarta, 22-23 Oktober 2015

FACULTY OF ENGINEERING TARUMANAGARA UNIVERSITY JAKARTA-INDONESIA 2015 REVIEWER

1. Dr. Harto Tanujaya Tarumanagara University, Indonesia (Chair) 2. Prof. Hui Ming Wee Chung Yuan Christian University, Taiwan 3. Prof. Satoyuki Kawano Osaka University, Japan 4. Prof. Robert Vale Victoria University of Wellington, New Zealand 5. Prof. Brenda Vale Victoria University of Wellington, New Zealand 6. Dr. Ing. A. Rugerri Toni L. Karlsruhe Institut für Technologie, Karlsruhe Germany and Atma Jaya Catholic , Indonesia 7. Dr. Sie Teng Soh Curtin University, Australia 8. Dr. Thomas Marconi Delft University of Technology (TU Delft), The Netherlands 9. Prof. Yahaya Ahmad University of Malaya, Malaysia 10. Prof. Nasir Bin Daud University of Malaya, Malaysia 11. Prof. Mohd. Zulkifly b. Abdullah Universiti Sains Malaysia, Malaysia 12. Prof. Zaidi Mohd. Ripin Universiti Sains Malaysia, Malaysia 13. Dr. Ing. M. Razi Abdul Rahman Universiti Sains Malaysia, Malaysia 14. Dr. Ing. Joewono Prasetijo Universiti Tun Hussein Onn, Malaysia 15. Dr. Mohamed Azlan Suhot Universiti Teknologi Malaysia, Malaysia 16. Dr. Bambang K. Hadi Bandung Institute of Technology, Indonesia 17. Prof. Indarto University of Gadjah Mada, Indonesia 18. Prof. Jamasri University of Gadjah Mada, Indonesia 19. Prof. Tresna P. Soemardi University of Indonesia, Indonesia 20. Prof. I Made Kartika University of Indonesia, Indonesia 21. Prof. Danardono A. S. University of Indonesia, Indonesia 22. Prof. Eddy S. Siradj. University of Indonesia, Indonesia 23. Prof. Dr. Ir. Teuku Yuri M. Zagloel University of Indonesia, Indonesia 24. Dr. Yono Reksoprodjo University of Indonesia, Indonesia 25. Prof. Tjokorda Gde Tirta Nindhia , Indonesia 26. Prof. Ngakan Putu Gede Suardana Udayana University, Indonesia 27. Prof. I Gusti Bagus Wijaya Kusuma Udayana University, Indonesia 28. Prof. Kuncoro Diharjo , Indonesia 29. Prof. I Nyoman Pujawan Sepuluh November Institute of Teechnology, Indonesia 30. Prof. Hadi Sutanto Atma Jaya Catholic University of Indonesia, Indonesia 31. Dr. Iftikar Z. Sutalaksana Bandung Institute of Technology, Indonesia 32. Prof. Tri Harso Karyono Tanri Abeng University, Indonesia 33. Dr. Rianti Ariobimo , Indonesia 34. Prof. Roesdiman Soegiarso Tarumanagara University, Indonesia 35. Prof. Chaidir A. Makarim Tarumanagara University, Indonesia 36. Prof. Agustinus Purna Irawan Tarumanagara University, Indonesia 37. Prof. Leksmono S Putranto Tarumanagara University, Indonesia 38. Dr. Adianto Tarumanagara University, Indonesia 39. Dr. Agustinus Sutanto Tarumanagara University, Indonesia 40. Dr. Danang Priatmodjo Tarumanagara University, Indonesia 41. Dr. Naniek Widayati Tarumanagara University, Indonesia 42. Dr. Titin Fatima Tarumanagara University, Indonesia

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

FOREWORDS CHAIRMAN OF THE ORGANIZING COMMITTEE

First of all let’s pray and say thanks to God for giving us His mercy and blessings. The development of technology nowadays is growing up so fast. It aims to meet the necessary of the community to get a better life. Technological innovation which needed to develop technology products that can help people in improving their lives. Therefore the academics are not only required to implement the learning process, but also have to do research and community service to produce innovative scientific research. Indonesian academics today are eager to involve in research activities. Therefore we required a scientific forum for mutual discussion, exchange information about the research that has been carried out especially related to Urban Engineering. Faculty of Engineering, University of Tarumanagara conducts the second international conference to bring the academics, researchers to develop their knowledge and exchange ideas so that the researchers can improve the results of research that has been done. The conference called the 2ndInternational Conference on Engineering Tarumanagara, 2015, which is held on the Auditorium at the 8th floor of M Building, Campus I, University of Tarumanagara from 22 to 23 October 2015. The ICET 2015 conference theme is Urban Engineering for Future Generations. Future generations as the frontier of national development should be prepared from now on, along with the necessary infrastructure. The role of technology is to support the enhancement of the ability of future generations. This event includes to the presentation of scientific papers by keynote speakers, parallel sessions presenting papers of academics and research poster exhibition. The more extensive the information obtained, the more knowledge that we gained. Some papers submitted by researchers and academics from different countries such as, Germany, Malaysia will enrich the science and technological development. This conference proceedings contain the full text of all papers presented International Conference on Engineering of Tarumanagara 2015. Papers are categorized based on Engineering disciplines set by the organizing committee. Then, the presentation is divided into parallel sessions. On this occasion I would like to thank to: Foundation of Tarumanagara, Rector of Tarumanagara University, Dean of Faculty of Engineering Tarumanagara University and Sponsors of ICET 2015, for the support and help that has been given. I also would like to thank the authors for their contributions.

Finally I would like to apologies if there are deficiencies in the activity. Thank you for all the attention.

I Wayan Sukania, S.T., M.T. Chairman of the Organizing Committee

i 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

FOREWORDS DEAN OF FACULTY OF ENGINEERING

I would like to warmly welcome all participants of the 2nd International Conference on Engineering of Tarumanagara (ICET 2015). This conference is organized by Faculty of Engineering, Tarumanagara University. The main aim of this conference was to respond the problem related to urban engineering for future generation. As this conference was designed to gather scientists, engineers, practitioners, and industries in engineering related disciplines, I expect intense discussion will happen among them so that some brilliant ideas to be used to improve the quality of human life can be produced. I hope this conference will create an international networking and collaborating, especially in engineering research and publication. I would like to congratulate the organizing committee of ICET 2015, for their outstanding efforts. I would also like to express my gratitude to the sponsors for their contributions in making this conference a resounding success. I wish the International Conference on Engineering of Tarumanagara (ICET 2015) a very useful and fruitful occasion.

Thank you for your attention and contribution.

Prof. Dr. Agustinus Purna Irawan Dean of Faculty of Engineering

ii 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

SCIENTIFIC COMMITTEE

1. Dr. Harto Tanujaya Tarumanagara University, Indonesia (Chair) 2. Prof. Hui Ming Wee Chung Yuan Christian University, Taiwan 3. Prof. Satoyuki Kawano Osaka University, Japan 4. Prof. Robert Vale Victoria University of Wellington, New Zealand 5. Prof. Brenda Vale Victoria University of Wellington, New Zealand 6. Dr. Ing. A. Rugerri Toni L. Karlsruhe Institut für Technologie, Karlsruhe Germany and Atma Jaya Catholic University of Indonesia, Indonesia 7. Dr. Sie Teng Soh Curtin University, Australia 8. Dr. Thomas Marconi Delft University of Technology (TU Delft), The Netherlands 9. Prof. Yahaya Ahmad University of Malaya, Malaysia 10. Prof. Nasir Bin Daud University of Malaya, Malaysia 11. Prof. Mohd. Zulkifly b. Abdullah Universiti Sains Malaysia, Malaysia 12. Prof. Zaidi Mohd. Ripin Universiti Sains Malaysia, Malaysia 13. Dr. Ing. M. Razi Abdul Rahman Universiti Sains Malaysia, Malaysia 14. Dr. Ing. Joewono Prasetijo Universiti Tun Hussein Onn, Malaysia 15. Dr. Mohamed Azlan Suhot Universiti Teknologi Malaysia, Malaysia 16. Dr. Bambang K. Hadi Bandung Institute of Technology, Indonesia 17. Prof. Indarto University of Gadjah Mada, Indonesia 18. Prof. Jamasri University of Gadjah Mada, Indonesia 19. Prof. Tresna P. Soemardi University of Indonesia, Indonesia 20. Prof. I Made Kartika University of Indonesia, Indonesia 21. Prof. Danardono A. S. University of Indonesia, Indonesia 22. Prof. Eddy S. Siradj. University of Indonesia, Indonesia 23. Prof. Dr. Ir. Teuku Yuri M. Zagloel University of Indonesia, Indonesia 24. Dr. Yono Reksoprodjo University of Indonesia, Indonesia 25. Prof. Tjokorda Gde Tirta Nindhia Udayana University, Indonesia 26. Prof. Ngakan Putu Gede Suardana Udayana University, Indonesia 27. Prof. I Gusti Bagus Wijaya Kusuma Udayana University, Indonesia 28. Prof. Kuncoro Diharjo Sebelas Maret University, Indonesia 29. Prof. I Nyoman Pujawan Sepuluh November Institute of Teechnology, Indonesia 30. Prof. Hadi Sutanto Atma Jaya Catholic University of Indonesia, Indonesia 31. Dr. Iftikar Z. Sutalaksana Bandung Institute of Technology, Indonesia 32. Prof. Tri Harso Karyono Tanri Abeng University, Indonesia 33. Dr. Rianti Ariobimo Trisakti University, Indonesia 34. Prof. Roesdiman Soegiarso Tarumanagara University, Indonesia 35. Prof. Chaidir A. Makarim Tarumanagara University, Indonesia 36. Prof. Agustinus Purna Irawan Tarumanagara University, Indonesia 37. Prof. Leksmono S Putranto Tarumanagara University, Indonesia 38. Dr. Adianto Tarumanagara University, Indonesia 39. Dr. Agustinus Sutanto Tarumanagara University, Indonesia 40. Dr. Danang Priatmodjo Tarumanagara University, Indonesia 41. Dr. Naniek Widayati Tarumanagara University, Indonesia 42. Dr. Titin Fatima Tarumanagara University, Indonesia

iii 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

ORGANIZING COMMITTEE

Chairman I Wayan Sukania, S.T., M.T. Vice Chairman Imma Sofi Anindyta, S.T., M.Arch. Conference Secretariat M. Agung Saryatmo, S.T., M.M. Mekar Sari, S.T., M.Sc. Didi Widya Utama, S.T. M.T.

iv 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

PROGRAM OVERVIEW

Thursday, 22 October 2015

No Time Program 1 08.30-09.00 Registration 2 09.00-09.30 Opening Ceremony a) Balinese Welcome Dance b) National Anthem + Mars Tarumanagara c) Chairman Speech d) Opening by Vice Rector of Academics and Student Affairs, Untar e) Photo Session (WRA, Dean, Chairman, Keynote Speakers, Presenters, Sponsors) 3 09.30-09.40 Sponsorship Presentation 4 09.40-11.40 Keynote Speaker 1: Prof. Zaidi Mohd. Ripin University Sain Malaysia, Malaysia Keynote Speaker 2: Ir. Irwansyah. Industrial Estate Association of Indonesia (Himpunan Kawasan Industri) Head of Environmental and Spatial Planning 5 11.40-11.50 Appreciation to Keynote Speakers, Moderator, Sponsors) 6 11.50-12.00 Sponsorship Presentation 7 12.00-12.10 Technical Information 8 12.10-13.00 Lunch 9 13.00-15.00 Parallel Session I 10 15.00-15.30 Coffee Break 11 15.30-17.00 Parallel Session II

Friday, 23 October 2015

No Time Program 1 08.30-09.00 Registration 2 09.00-11.00 Parallel Session III 3 11.00-11.15 Closing Ceremony 4 11.15-12.00 Lunch

v

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

TABLE OF CONTENTS

Forewords: Chairman of the Organizing Committee i Forewords: Dean of Faculty of Engineering ii Scientific Committee iii Organizing Committee iv Program Overview v Table of Contents vi Parallel Session Schedules xii

Invited Papers Development of Low Frequency Electromagnetic Vibration Energy Harvester Wan Masrurah Hairudin, M. Izudin Alisah, Chan Ping Yi, Tan Yee Hern, Zaidi Mohd 1-8 Ripin

List of Papers - Architecture Paper ID Title Author/Authors pp Catholic Church: Influence of Liturgical Ritual in the Building AE-01 Design (Studied on Four Catholic Churches in DKI Jakarta Area) 1 Rudy Trisno, Sugiri Kustedja Performance Analysis in Home Industry Scale Production of Modified Traditional Brick as Green Building Material With Reed as AE-02 1-8 Filler Kurniati Ornam, Masykur Kimsan, La Ode Ngkoimani The Study of Defense Space on Chinatown Petak Sembilan, West AE-03 Jakarta 1 Nafi’ah Solikhah Survey on the Fulfillment of the Construction Requirements for AE-04 Non-Engineered Houses in North 1 Darwin Reveal Knowledge Pacitan Rural Architecture AE-05 1 Triyuniastuti, HB Satrio Wibowo, Sukirman Uniqueness Omah Dudur Dawa Architecture AE-06 1 Satrio HB Wibowo, Sudaryono, E. Pradipto Global and Local, at the Same Time AE-07 1 Franky Liauw Conducting Smart Programs in the Old Kampoeng Beyond the Modern Era City of Surabaya AE-08 1 Danny Santoso Mintorogo Wanda K. Widigdo, Liliany S. Arifin, Anik Yuniwati Adaptation to Climate Change as the Controller of Disaster Vulnerability in Coastal Settlements in Mempawah Hilir, West AE-09 1 Ely Nurhidayati Study of Staircases Design and Visitors’ Perception at Commercial AE-10 Building 1-8 Siti Belinda Amri, Santi, La Ode Abdul Syukur, Aspin

vi

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Paper ID Title Author/Authors pp Greenship Rating of Wood Materials in Building AE-11 James Rilatupa 1-9 Study of Bioclimatic Application to the Spatial Habitation Along the AE-12 River Bank Ciliwung 1-8

Handajani Asriningpuri, Ratih Budiarti, Harlisa Public Engagement in Public Space as the Elements of City Branding AE-13 1 Olga Nauli Komala Bornean Long House: Cosmological Value in Socio-Cultural AE-14 Transformation Stream 1-10 Klara Puspa Indrawati Potential Tour Toward Village of Cultural Conservation of AE-15 Baluwerti, Surakarta, Jawa Tengah, Indonesia 1-10 Naniek Widayati Priyomarsono

List of Papers - Civil Engineering Paper ID Title/Author/Authors pp The Understanding and the Use of Motorcycle Special Stopping CE-01 Space in Signalized Intersection 1-5 Leksmono Suryo Putranto, Minggaza Suhindra Identification of Volcanic Rocks in Imogiri Yogyakarta Based on CE-02 Subsurface Geologic Data 1-9 Winarti, Hill Gendoet Hartono Model Test of Influence Groundwater Pumping to Decrease Surface CE-03 of the Land 1-5 Nurnawaty, M. Selintung, M.Arsyad Thaha, F. Marikar Analysis on the Needs of Bike Share in Institut Teknologi Sepuluh CE-04 Nopember Surabaya 1 Siera Rozanah, Ervina Ahyudanari Flexural Behavior of Bamboo Reinforced Concrete Beams CE-05 1-6 Ika , Erianto Wijaya Identification of Hazardous Road Sections Using Over Dispersion- CE-06 Excess Zero Data of Vehicle Accident at Johor Federal Roads 1-6 Joewono Prasetijo, W Zahidah Musa, Zaffan Farhana Zainal Speed Profile Based on Design Consistency CE-07 1-6 Joewono Prasetijo, Zaffan Farhana Zainal, W. Zahidah Musa DAB as an Effective Dispute Resolution in Construction Industry CE-08 1 Purnomo Analysis Energy Consumption and Price of Fuel Truck in Makassar CE-09 1-9 Mukhtar Lutfie, Lawalenna Samang, Sakti Adji Adisasmita, Isran Ramli Influence of Economic External Factors on Construction Project CE-10 Duration Identification 1-6 Basuki Anondho, Yusi Yusianto, Jemmy Wijaya Analysis of the Influence of Longitudinal Beam Toward the Concrete’s Nominal Shear Strength CE-11 1-6 Daniel Christianto, Fannywati Itang, Widodo Kushartomo, and Irene Natasha Kosasih

vii

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Paper ID Title/Author/Authors pp Stabilization of Marine Dredged Sediment With Hydraulic Binders CE-12 and Silica Fume 1 Ernesto Silitonga

List of Papers - Electrical Engineering Paper ID Title/Author/Authors pp Sentiment Classification for Academic Questionnaire Using NBC EE-01 and SVM 1-8 Amir Hamzah, Naniek Widyastuti GUI Applications on Ground Segment Research Rockets EE-02 Imam Sampurno Nugroho, Yahan Nuryad, Nanniek Andiani, Yohannes 1 Dewanto Document Subjectivity and Target Detection in Opinion Mining EE-03 Using HMM Pos-Tagger 1 Amir Hamzah, Naniek Widyastuti Analysis, Simulation and Implementation of Linear Block Codes EE-04 Using a Microcontroller 1-7 Joni Fat Visual Performance of Tunnel Lighting Along the Jakarta Outer Ring EE-05 Road 1-8 Endah Setyaningsih, Jeanny Pragantha Microcontroller Based Speed Controller of One Phase Induction AC EE-06 Motor in Escalators 1-8 Hadian Satria Utama, Edward Naulibasa Lie, Pono Budi Marjoko Implementation Hadoop on Private IaaS Cloud Computing EE-07 1-6 Edy Kristianto

List of Papers - Industrial Engineering Paper ID Title/Author/Authors pp Rapid Tooling Manufacturability Advanced Materials Using Automation Fuzzy-AHP Method for Injection Gyro-Magnetic Hot IE-01 1-6 Mold Moh. Hardiyanto Workload Analysis of Manually Operator at Clean and Tidy Car IE-02 Wash 1-10 Indra Surianto, I Wayan Sukania and Lamto Widodo Designing a "Voice of Customer" Program to Support Knowledge- IE-03 Based-QFD 1-8 Ronald Sukwadi, Mokh. Suef, Enny Widawati, Cynthia Giovany The Strategy for Improving the Quality of Printing Film Production IE-04 at PT X 1-8 Lithrone Laricha S, Delvis Agusman, Lucky Research Comparison Among Business Incubator Research Sample and Analysis in the World IE-05 Lina Gozali, Maslin Masrom, Habibah @ Norehan Haron, Teuku Yuri M. 1-7 Zagloel

viii

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Paper ID Title/Author/Authors pp Developing Algoritm to Design Jig & Fixture in SME Supporting Industry Based on Quality Function Deployment Methods (Case IE-06 Study: Design Assy Machine and Leakage Testing Machine for Air 1-7 Brake Coupling Hose) Cucu Wahyudin, Aan Mintarsih Comparison of Modular Layout and Distributed Layout Using IE-07 Simulation Approach 1-8 Trifenaus Prabu Hidayat, Andre Sugioko Optimization Replacement Schedule of Chisels Based on Quality IE-08 Cost With Exponentially Increasing Failure Rate 1-6 Dadang Arifin Re-Design The High of Handlebar on Semarang’s Bus Rapid Transit Using Anthropometry and Ergonomy Approach IE-09 1-6 Annissa Lutfiah Hatuwe, Annisa Nindya Putri, Hanung Kurniawan, Reza Prisman Optimization of Production Planning Using Goal Programming IE-10 Method (Study in a Cement Plant) 1 Syamsul Anwar, Lonny Afrizalmi Risk Assessment of Distal Upper Extremity by Strain Index Method IE-11 in a Small Shoes-Making Industry 1 Syamsul Anwar, Yuri Fandi Tanjung The Effect of Working Environment Conditions on Employees’ Job IE-12 Satisfaction in a Palm Oil Industry 1 Elsa Febriani, Musdirwan, Syamsul Anwar Improvement of Service Performance in PO. Sandy Putra by IE-13 Implementation of Safety Management System for Public Transport 1-7 Hanung Kurniawan Designing a Closed Loop Tutelage System to Support Student in IE-14 Preparing and Executing the Study Plan 1-8 Andrijanto Design of Eco-Friendly Dairy Farm Business Plan Using Business IE-15 Canvas Model 1 Meity Martaleo, William Bobby Susanto, Marcellia Susan Heuristic Model With Discritized Time Horizon for Solving IE-16 Alternative Machine Scheduling Problem on Single Operation 1-6 Irwan Sukendar Simulator of Pitot Tube, Using The Sensor MPX5100 in an Aircraft IE-17 Model Joko Sugiarto, Dwijati, Hendardi, Yohannes Dewanto Ergonomic Aspect of Physical Environment in Junior High School IE-18 (Between Individual Comfort and Saving Energy Behavior) 1-12 Lamto Widodo, Fransisca Iriani, Endah Setyaningsih Embodiment Design of High Capacity Mixer (Case Study : Steamed IE-19 Sponge Cake Production at “M” Home Industry) 1-9 Adrian Christiady, Vivi Triyanti The Comparison of MTM-1 and MOST in Predicting Work Element IE-20 Time 1-8 Ivana Theresia Libardus, Vivi Triyanti

ix

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

List of Papers - Mechanical Engineering Paper ID Title/Author/Authors pp Study of the Phenomenon of Collapse and Buckling the Car Body Frame ME-01 1 Didik Sugiyanto, Audri Deacy Cappeberg Model Reduction Methods for Cracked Rotor Dynamics Analysis ME-02 1-8 Rugerri Toni Liong Design and Construction of a Prototype of Screw Press for the Collection of Coconut Milk ME-03 1-6 I Wayan Surata, Tjokorda Gde Tirta Nindhia, Davied Budyanto, Ahmad Eko Yulianto Assessment of Outside Air Supply for Split AC System. Part B: ME-04 Experiment 1 K. D. Putra, A. Bimaridi, E. Djunaedy Assessment of Outside Air Supply for Split AC System. Part A: ME-05 Affordable Instrumentation 1 A. Bimaridi, K. D. Putra, E. Djunaedy Analysis Energy Usage and OTTV in the University Building ME-06 1 Suci, Ery Djunaedy, M. Ramdlan Kirom Effect of Tool Nose Radius on Surface Roughness for Machining ST ME-07 60 Steel Using Carbide Inserts 1-7 Sobron Lubis, Erwin Siahaan, Teguh Imam Suyatno Design Can Cover for Feeding Conveyor for Closing Cans in Cans ME-08 Machine Maker 1 Gusti Ryandi Arief, Agung, Wina Libyawati, Yohannes Dewanto Design of Cessna Aircraft Model JD - 010 Use Scale 8:1 Based Radio ME-09 Control 1 Muhammad Ahda, Ahmad Ilham Firdaus, Erick H.K., Yohannes Dewanto Magnet for Generate Electric Power Applications ME-10 1 Dzulfi S Prihartanto, Alva Abdul Ganis, I.G.Eka Lesmana Dynamic Analysis on Conditions For Stay off Airfoil, Flying and ME-11 Landing 1 Bismil Rebetta, Aprilia Sakti, Erick H.K. Simulation of Non-Newtonian Fluid Flow Through Encapsulation of 3-Dimensional Stacked Flip-Chip Package Using Lattice Boltzmann ME-12 1-6 Method M.H.H. Ishak, M.Z. Abdullah, Aizat Abas, M.I. Ismail, M.S. Mohamad Cyclone Turbine Ventilator as a Power Source Lamps for Home ME-13 Lighthing 1-9 Jenny Delly, Welly Liku Padang, Baso Mursidi, Budiman Sudia Finite Element Analysis of Modified In-Wheel Electric Motor for ME-14 Hybrid Electric Motorcycle 1-6 Didi Widya Utama Pathological Tremor Measurement and Reproduction ME-15 1-8 Ping Yi Chan, Zaidi Mohd Ripin FSI Analysis on the Effect of Membrane Rigidity on Laminar Flow Separation Over NACA 643-218 Airfoil ME-16 M.S. Abdul Aziz, M.Z. Abdullah, S.M. Firdaus, H. Yusoff, K.A. Ahmad, M. 1-8 Zubair

x

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Paper ID Title/Author/Authors pp Analysis Ethyl Ester in Biodiesel of Raw Material Waste Coconut ME-17 Oil and Arak 1-4 I Wayan Bandem Adnyana, Ni Made Suaniti Design and Development of Quadcopter Prototype ME-18 1-7 Riyan Fenaldo Alphonso, Agustinus Purna Irawan, Frans Jusuf Daywin Experimental Investigation on Electronic Cooling Performance Using Porous Medium Heat Sink ME-19 1-6 Muhammad Zaakir Angsoommuddin, Mohd Zulkifly Abdullah, Third Author Tensile Strength Polymer Matrix Composite With Reinforcement ME-20 Gigantochloa Apus 1-7 Sofyan Djamil, Mohamed Azlan Suhot, Mohd Zaki Hasan Effectivity of Heat Exchanger Using Coolant Fluid ME-21 1-4 Harto Tanujaya Alitizing Process of Low Alloy Steel Emergency Doors in High Rise ME-22 Building 1-8 Erwin Siahaan

List of Papers - Urban Engineering Paper ID Title/Author/Authors pp Decision Design Support System of Urban Landscape Planning UE-01 Using 3D Interactive Visualization 1 Herry Santosa, Shinji Ikaruga, Takeshi Kobayashi Sustainability Level of Settlement in Gajah Wong Riverside Area, UE-02 Kotagede, Yogyakarta 1 Abraham Bhaskara Singgih Urban Sprawl Effect to Sustainable City UE-03 1-3 Andas Budy Arrangement Model on the Sustainable Coastal Settlement in UE-04 Makassar 1-8 Naidah Naing, Asdar Djamereng, Bulgis Implementation for Optimizing the Turnkey Project Scheme in Highrise Buiding/Flat Development Base on Duration and Interest UE-05 1-13 Rate Sylvie Wirawati, Ricky Pittra Halim Spatial Articulation and Coexistence of Mode of Production in the UE-06 Dynamics of Development at the Urban Fringe of Makassar City 1-11 Batara Surya

xi

2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

DESIGN AND CONSTRUCTION OF A PROTOTYPE OF SCREW PRESS FOR THE COLLECTION OF COCONUT MILK

I Wayan Surata1), Tjokorda Gde Tirta Nindhia2), Davied Budyanto3), Ahmad Eko Yulianto4)

1)Department of Mechanical Engineering, Udayana University, Denpasar-80361, Indonesia 2)Department of Mechanical Engineering, Udayana University, Denpasar-80361, Indonesia 3,4)Student of Mechanical Engineering, Udayana University, Denpasar-80361, Indonesia

e-mail: [email protected]

Abstract

The process of cooking oil production generally starting from grated the mature coconut meat, then pressing the grated meat to obtain coconut milk, and finally heating the coconut milk to obtain the cooking oil. Pressing mechanism to obtain coconut milk is a very important step and decisive in the process of producing cooking oil. The amount of milk produced depends on the pressure applied at the time of pressing grated coconut. The higher the pressure, the more milk is obtained. Cooking oil production in the rural area is still done traditionally. Local practice of making cooking oil is by pressing the grated coconut manually by hand. Pressing by hand resulted not optimum yield of coconut milk, and also the workers feel fatigue quickly. While the mechanical pressing tools that available in the market is not efficient due to the working steps too much and take long time per cycle. To resolve this problem, power screw pressing unit for milk extraction is constructed, as the process is simple, continues, and safe. The screw press produces a compressive force in the cylinder to push and press the grated coconut until the end of the cylinder while the coconut milk and coconut dregs flows out continuously. Screw pressing of grated coconut was designed using straight shaft configuration with square profile. The ergonomics consideration is also applied in this design in order to make the operator safe and comfortable. After construction is completed then the performance test is done to investigate the actual capacity and yield of milk produced. The test results showed that screw pressing of grated coconut worked well with capacity an average of 13 kg/h and coconut milk yield of 56%.

Keywords: screw press, grated coconut, coconut milk, milk yield

INTRODUCTION Cooking oil included in the group of nine basic commodities that generally is needed by Indonesian community, therefore cooking oil must be available and be sold freely in the market every day. The most important oleaginous plants for cooking oil are: palm, sunflower, soya, corn, almond, sesame, nut, coconut, olive, etc. The production of cooking oil from coconut as raw materials, in addition to the main results in the form of coconut milk and cooking oil, also produced a byproduct in the form of coconut dregs or the solid part which is a valuable source of protein for livestock feeds. The cooking oil production process from coconut generally starting from grated the mature coconut meat, then pressing the grated meat to obtain coconut milk, and finally heating the coconut milk to obtain the cooking oil. Currently coconut grater tool has equipped an engine that driven by electrical power. While squeezing process is still done manually by hand using filters that made from the part of coconut tree or cloth. The local practice of squeezing the grated coconut is still done traditionally, because the equipment is simple, it is also cost-effective and does not require any particular skill [1,2]. Although in the market has also been available a mechanical squeeze tool of screw-piston, and screw-hydraulic, but such tool is not efficient due to many steps that must be done in one working cycle. Working cycle includes six steps, starting from 1) filling the tube with grated coconut, 2) placing the tube in the frame, 3) press by turning the lever, 4) release the pressure of the piston by turning the lever back, 5) lift the tube out of the frame, and finally 6) take out the dregs from the tube. The working mechanism of

ME-03/1 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

this tool is very long and difficult for the operator, besides that working posture and dimension of the tools are not ergonomics, cause fatigue and musculoskeletal disorders [3,4,5,6]. Ergonomics approach must be carried out, in which the technology being used, the organization being designed and managed, and the product being produced must be as such planned and executed, so that the work system and products shall be humane, competitive and sustainable [4]. Technology being used must be assessed comprehensively using six criteria namely it must be technically, economically, social culturally and ergonomically sound, safe energy and preserve the environment. Ergonomics application in addition to create a working system that is humane, also shown to provide economic benefits. Hendrick [7] stated that good ergonomics is good economics, which meant that the correct application of ergonomics will provide higher economic returns. Specifically ergonomics will provide several benefits, among others, (1) the use of muscle and energy more efficient, (2) more efficient in time, (3) reduced fatigue, (4) reduced of work accidents, (5) reduced of occupational diseases, (6) comfort and job satisfaction increases, (7) increased efficiency, (8) increased quality of product and productivity, (9) reduced of working errors, (10) reduced the operational costs [4,8]. The aims of this research were to design and construct a mechanical tool for squeezing grated coconut using a power screw mechanism that rotated manually to produce coconut milk continuously. Power screw component is a mechanism that is used to convert rotary motion into rectilinear motion and usually transmits power. Power screw can be applied in many equipment such as car jack to lift or lower the load, converting rotary motion into a straight motion, and provide large compressive force on the squeezing machine. Power screw unit is a tool that is very commonly used for oil extraction, because the working steps are very simple, continuous, and easy to operate. Processes and phenomena that occur during the process of pressing materials are very complex. The necessary components to power the press are: the power required for material transport along the pressing chamber, the power required to press the oleaginous material, the power required to overcome the friction between the screw spire and the material, the power required to push the material from the press through the cylinder head [9]. The main data taken into consideration for prototype design are: the variable auger rotational speed, the variable pressure in the barrel, the diameter of barrel, and the diameter of the auger shaft [9]. Generally the rotational speed of a power screw for pressing process ranges between 15-40 rpm [9,10,11,12]. The next variable is the working pressure inside the barrel. According to Beerens [13], the final pressure in a squeezing process of jatropha oil plants (jatropha seeds) minimum 4 MPa. Because the grated coconut is not a grain, but very soft material then the pressure is much lower. In this study assumed working pressure of 2 MPa.

MATERIALS AND METHOD Power screw configuration with a straight shaft is the most common mechanism used for press tools, because the manufacturing process is easy. The distance of the pitch and diameter of the screw base is constant as depicted in Figure 1.

ME-03/2 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Figure 1. Geometry of power screw with straight shaft

According to Sorin-Stefan et al. [9] press volume flow rate can be evaluated by using the relatioan: 3 Qv = Vte . (1 - ԑ).n.k.60 [m /h] (1) where: Vte - is the theoretical volume of the material displaced by the auger spire during a complete rotation, in the exhaust area [m3] n - auger rotative speed [rpm] k - coefficient taking into account the material flowing back through the spire extremities, as well as the incomplete feed with material (k = 0,2 – 0,35) ԑ - pressure ratio, calculated using equation ԑ = (vi – vf)/vi, with 3 3 vi = initial volume of the material [m ], and vf = final volume [m ].

The theoritical volume of the material displaced by the auger spire is calculated using the following equation: 2 2 3 Vte = (d2 – d1 ) (p – δ) [m ] (2) Where: p - the auger spire pitch [m] δ - thickness of the auger spire [m] d2 - outer diameter of the auger spire [m] d1 - inner diameter of the auger spire (shaft) [m].

By replacing in equation (1) the expression of the theoretical volume given by equation (2), it results the expression of the press volume flow rate: 2 2 3 Qv = (d2 – d1 ) (p – δ) (1 - ԑ).n.k.60 [m /h] (3) The yield of coconut milk is calculated by using the equation: wo – wf Milk yield = x 100% (4) wo wo - initial weight of grated coconut [kg] wf - final weight of grated coconut [kg].

In this study, rotation of the screw shaft was designed for 15 - 25 [rpm] which rotated manually by hand. Working pressure assumed 2 [MPa]. Furthermore selected barrel diameter do = 72 [mm]; the outer diameter of the screw d2 = 71 [mm]; and a screw shaft diameter d1 = 22 [mm]. Power screw length L = 300 [mm]; pitch distance p = 42.8 [mm]; and thread thickness δ = 1.2 [mm].

ME-03/3 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

The power screw pressing unit will be operated manually in a sitting position, therefore the dimension should fit with anthropometrics of the operator, such as hand wheel diameter, diameter of the handle, and utilization of hand force to rotate the screw. Elbow height for Indonesian operator in a sitting position is 240 mm, the handheld diameter is 48 mm [6]. Hand wheel diameter for high force is recommended between 45.7 cm to 50.8 cm, with an average hand strength 49 kg [14]. Grated coconut is smooth and slick material, therefore the friction coefficient between grated coconut and surface of the barrel is smaller. The coefficient of friction μ = 0.2; pressure ratio ԑ = 0.5; backflow coefficient k = 0.35; and based on the Rumus Hitung [15] are known the volume of 1 [m3] grated coconut equal with weight 352 [kg]. Illustration design of power screw for squeezing grated coconut and their components are shown in Figure 2.

Figure 2. Prototype design of power screw pressing unit

RESULTS AND DISCUSSION Prototype of power screw pressing unit consists of two main components, namely a screw shaft as shown in Figure 3, and the cylinder barrel in Figure 4. The complete assembly of the grated coconut press tool as depicted in Figure 5, where the unit operated manually by hand.

Figure 3. Screw shaft Figure 4. Cylinder barrel

ME-03/4 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

Figure 5. The grated coconut press tool

Performance test included actual production capacity and yield of milk produced. The rotation of the screw shaft varied between 15 [rpm] to 25 [rpm], or an average 20 [rpm]. The milk yield calculation refers to the equation (4), and the results were presented in Table 1.

Table 1. Performance test results Parameter Unit Analysis of result Mean 1 2 3 4 Grated coconut weight kg 1.00 1.00 1.00 1.00 1.00 Dregs weight kg 0.43 0.43 0.45 0.45 0.44 Time for pressing minutes 4.50 4.55 4.45 5.02 4.63 Capacity kg/h 13.33 13.19 13.48 11.95 13.00 Milk yield % 57.00 57.00 55.00 55.00 56.00

The theoretical capacity was calculated in accordance with equation (3), for rotation of 15 [rpm] the theoretical capacity Q = 8.25 [kg/h], and for rotation of 25 [rpm] the theoretical capacity Q = 13.75 [kg/h]. Meanwhile, the test results in Table 1 shown that the average actual capacity about 13.00 [kg/h]. This result was very satisfactory because the experimental results were in the range of theoretical calculations. Based on the analysis in Table 1, the milk yield was obtained an average of 56%. This result was higher when compared to hand squeezing which the milk yield about 52.9% [16]. Likewise when compared to use a mechanical piston screw the milk yield between 47.5 to 55% [17].

CONCLUSIONS The power screw for pressing grated coconut worked well as designed. The performance of this pressing unit was better than screw piston type. The actual capacity about 13 [kg/h], and the milk yield produced an average of 56%. This equipment can be used and suitable to support small industries in the process of making traditional cooking oils.

ME-03/5 2nd International Conference on Engineering of Tarumanagara (ICET 2015) Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 22-23 October 2015

ACKNOWLEDGEMENTS The author wish to thanks the Ministry of National and Culture of The Republic of Indonesia for financial support under scheme of Research Group grant (Skim Penelitian Grup Riset) for the year of 2015 granted through Udayana University, Bukit Jimbaran, Bali, Indonesia.

REFERENCES [1] Palungkun, R., Aneka Produk Olahan Kelapa. Bogor: Penebar Swadaya, 1992. [2] Rindengan, B., Novarianto, H., Minyak Kelapa Murni: Pembuatan dan Pemanfaatan. Penebar Swadaya, 2006. [3] Ghazali, I., Tambunan, M., Nazlina, Perancangan Alat Pemeras Kelapa Parut Menjadi Santan dengan Cara Pengepresan Manual yang Ergonomis. Jurnal Teknik Industri FT.USU, 2013, Vol. 2 No. 2, p. 19-27. [4] Manuaba, A., Ergonomi, Kesehatan, dan Keselamatan Kerja. Prosiding Seminar Nasional Ergonomi. Surabaya: Guna Widya, 2000. [5] Grandjean, E., Fitting the Task to the Man, a Textbook of Occupational Ergonomics, Piladelphia: Taylor &Francis, 1998. [6] Nurmianto, E., Ergonomi, Konsep Dasar dan Aplikasinya. Jakarta: Candimas Metropole, 1996 [7] Hendrick, H.W., 2002. Good Ergonomics is Good Economics. Proceeding Ergonomics, International seminar on Ergonomics. [8] MacLeod, D. 2006. The Ergonomics Kit for General Industry, 2nd ed. Taylor & Francis [9] Sorin-Stefan, B., Ionescu, M., Voicu, G., Ungureanu, N., Vladut, V., Calculus Elements for Mechanical Presses in Oil Industry. Politehnica University of Bucharest, Romania, 2013. [10] Martins, K.C.R., Silva, P.H.C., Galvao, V.L., Martins, L.S.P., Matias da, S.L.E, Pereira, R.J.R., Development of Prototype of Screw Press for The Collection of Oil From Seeds of Castor and Jatropha. Brazilian Congress of Thermal Sciences and Engineering. Uberiandia, Brazil, 2010. [11] Sari, P., Preliminary Design and Construction of A Prototype Calona Seed Oil Extraction Machine. Thesis. The Graduate School of Natural and Applied Sciences of Middle east Technical University, 2006. [12] Zheng, Y., Screw Pressing of Whole and Dehulled Flaxeed for Organic Oil Rich in Omega-3 Fatty Acids. Dissertation. Nort Dakota State University of Agriculture and Applied Science, 2003. [13] Beerens, P., Screw-pressing of Jatropha seeds for fuelling puposes in less developed countries. Thesis. Department of Sustainable Energy Technology, Eindhopen University of Technology, 2007. [14] Woodson, W.E., 1981. Human Factors Design Hand Book. [15] Rumus Hitung, 2013, Tabel Massa Jenis dan Berat Jenis Berbagai Zat di Sekitar Kita. Available at: http://rumushitung.com/2013/05 /31/tabel-massa-jenis-dan-berat-jenis/, Diakses: 11 Juli 2015. [16] Winarno, F.G., Kelapa Pohon Kehidupan. Jakarta: Gramedia Pustaka Utama, 2014. [17] Surata, I W., Penggunaan Roda Tangan Berhendel pada Alat Pres Parutan Kelapa Mengurangi Keluhan Sistem Muskuloskeletal dan Meningkatkan Produktivitas Kerja Pembuat Minyak Kelapa Tradisional di Desa Ped Nusa Penida. Tesis. Denpasar: Program Pascasarjana Universitas Udayana, 2001.

ME-03/6