albedo ...let's reflect knowledge 3DPRINTINGMEET2021 October 11-12, 2021 Final Program

ALBEDO MEETINGS Floor# 3, Advant Building, 99B, Kakatiya Hills, Kavuri Hills, Madhapur Hyderabad, TS 500033 [email protected] Day 1 | October 11, 2021 Virtual Presentations , (GMT+8) Title: On Processes, Materials and Mechanical Properties for Non- 09:30-10:10 P Load-Bearing and Load-Bearing Applications Xinhua Wu, Monash University, Australia Title: Effects of In-Situ Rolling on the Microstructure and 10:10-10:40 K Mechanical Properties of Additively-Manufactured Ti-6Al-4V Aijun Huang, Monash University, Australia Title: Stereolithographic Additive Manufacturing of Practical 10:40-11:10 K Structures Soshu Kirihara, Osaka University, Japan Title: Ma–Wang Material Model for Cold-Spray Additive 11:10-11:40 K Manufacturing Simulation Ninshu Ma, Osaka University, Japan Title: Recent Progress in Additive Manufacturing of Polymer 11:40:12:20 P Composites Based on Powder Bed Fusion Zhou Kun, Nanyang Technological University, Singapore Title: Additive Manufacturing of Nickel-Based Superalloys 12:20-12:50 K Feng Liu, Central South University, China Title: New Trends in High Strength Al Alloys Design with Additive 12:50-13:15 I Manufacturing Jianglong Gu, Yanshan University,China Title: 3D Printing of Conformal Load-bearing Antenna Systems 13:15-13:40 I Jin Huang, , China Title: A Novel Method to Calculate the Inherent Strain for 13:40-14:05 I Predicting the Part Distortion in Additive Manufacturing Hong-Seok Park, University of Ulsan, Korea Title: Directly 3D-Printed Connectors for Microfluidic Interconnections 14:05-14:35 K Ricky S W LEE , Hong Kong University of Science and Technology, Hongkong Title : Clinical Applications of 3D Printing Technique in Medical Fields and Open-Source COVID-19 Medical Supplies in Taiwan 14:35-15:00 I Jia-En Chen, National Taiwan University of Science and Technology, Taiwan Title: Production Routes for Specialized, Spherical Powders 15:00-15:30 K Karin Ratschbacher, GfE Metals and Materials GmbH, Germany Title: Bio-digital Manufacturing our Future 15:30-15:55 I Alberto T. Estevez, Universitat Internacional de Catalunya, Spain Title: Biodegradable Materials in 3D Printing 15:55-16:20 I Mazurchevici Simona-Nicoleta, University of Iași, Romania Title: Bi-directional Machine Learning (ML) Modelling for Direct Energy Deposition Additive Manufacturing (DED-AM) Processing 16:20-16:45 I Design Jian Qin, Cranfield University, UK Title: Modelling and Understanding the Rolling-Enabled Mitigation of Residual Stress and Distortion in Wire Arc Additive 16:45-17:10 I Manufacturing Yongle Sun, Cranfield University, UK Title: A New Wire Based Direct Energy Deposition Process - 17:10-17:40 K Higher Deposition Rate with Accurate Bead Geometry Control Jialuo Ding, Cranfield University, UK End of Day 1 Day 2 | October 12, 2021 London Time Zone(GMT+1) Title: Three-Dimensional Technology Applications in Maxillofacial 09:30-10:00 K Reconstructive Surgery: Current Surgical Implication Imad Abu ElNaaj, Bar-Ilan University, Israel Title: Development And Implementation By Micro-extrusion Of 10:00-10:25 I Innovative Alumina Pastes, Based On Eco-Friendly Additives Delphine Gourdonnaud, University of Limoges, France Title: 3d Printed Metamaterial Units 10:25-10:50 I Anna Tasolamprou, Foundation for Research and Technology Hellas, Greece Title: Mechanical Behavior of 3D AISI 316L Structures 10:50-11:15 I Manufactured by Laser Metal Deposition Piera Alvarez Aguado, Ikergune- Inzu Group, Spain Title: 3D Printing of Cellulose-Based Materials for Electrical 11:15-11:40 I Insulation, Automotive and Marine Applications Heli Kangas, VTT Technical Research Centre of Finland, Finland

Title: 3D-Printed Ceramic Microreactors for Catalytic Applications 11:40-12:05 I Oscar H. Laguna,University of Jaen, Spain Title: Tissue Engineering and Three-Dimensional Printing in 12:05-12:30 I Periodontal Regeneration: a Literature Review Simon Raveau, University of Nantes, France Title: 3D Printing of polymeric Periodic Open Cell Structures 12:30-12:55 I (POCS) as Micro Reactors for Catalytic Applications Pablo Fernandez Liétor, University of Jaen, Spain Title: In-Process Monitoring and Operator Feedback During the 12:55-13:20 I Additive Manufacturing of TiAl6V4 Alloy Components Denis Dowling, University College Dublin, Ireland Title: Additive Manufacturing of HA/PEEK Composites for 13:20-13:45 I Implantation Krzysztof Rodzen, , UK Title: Characterization Method for the Processing and Mechanical 13:45-14:10 I Properties Potential of Fiber Reinforced Print Filaments Rolf Walter, Institute for Composite Materials, Germany Title: Challenges in the Fabrication of Ceramic Feedstock 14:10-14:35 I Materials for 3D Printing Isakov Dmitry, University of Warwick, UK Title: High Resolution Additive Manufacturing of Functional 14:35-15:00 I Materials Valentina Bertana, Polytechnic University of Turin, Italy Title: Modelling and Simulation of the Photopolymerization Process during Printing of Ceramic Green Parts During a 15:00-15:25 I Stereolithography Process. Vincent Pateloup, Institute for Research on Ceramics, France Title: Possibilities of Plasma Techniques Application for Modification of Titanium Alloy Surface on the Example of the 15:25-15:50 I Ti6Al7Nb Alloy Anna Jedrzejczak, Lodz University of Technology, Poland Title: Formation and Structure of 3D Printed Fiber Reinforced 15:50-16:30 P Composites Abdel-Fattah Seyam, Wilson College of Textiles, USA Title: Compressive Load Influence on the Behaviour of 3D Printed 16:30-16:45 P001 Original Design Polymeric Heels for Orthopaedic Footwear Edita Gelažienė, Kaunas University of Technology, Lithuania End of Virtual Presentations 3DPRINTINGMEET2022 NOVEMBER 07-09, 2022 | CHICAGO, USA

2ND INTERNATIONAL MEET & EXPO ON 3D PRINTING AND ADDITIVE MANUFACTURING

https://albedomeetings.com/3dprintingmeet/2022/index.php