DOCSLIB.ORG

Main Steel Your Perfect Supply Chain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Main Steel Your Perfect Supply Chain MAIN STEEL CORPORATE IDENTITY RANGED LOGO VERSIONS & COLOR PALETTE NOTE: PREFERRED VERSION 5-8-12 MAIN STEEL CORPORATE IDENTITY RANGED LOGO VERSIONS & COLOR PALETTE NOTE: PREFERRED VERSION 5-8-12 4C GRADIENT 4C GRADIENT USE: ALL 4C/DIGITAL PRINTING USE: ALL 4C/DIGITAL PRINTING NOTE: FOR WEB, STRAIGHT CONVERT TO RGB OR REFERENCE RGB/HEX VALUES BELOW. NOTE: FOR WEB, STRAIGHT CONVERT TO RGB OR REFERENCE RGB/HEX VALUES BELOW. 4C GRADIENT REVERSE USE: ALL 4C/DIGITAL PRINTING ON DARK BACKGROUND MAIN STEEL 3C SPOT COLOR YOUR PERFECTUSE: RESTRICTIVE PRINTING, EMBROIDERY 4C GRADIENT REVERSE SUPPLY CHAIN USE: ALL 4C/DIGITAL PRINTING ON DARK BACKGROUND GRAYSCALE MAIN STEEL CORPORATE IDENTITY RANGED LOGO VERSIONS & COLOR PALETTE USE: B/W PRINTING NOTE: PREFERRED VERSION 5-8-12 As part of the Shale-Inland family of companies, Main Steel is 4C GRADIENT USE: ALL 4C/DIGITAL PRINTING NOTE: FOR WEB, STRAIGHT CONVERT TO RGB a North American steel service center that provides stainless, OR REFERENCE RGB/HEX VALUES BELOW. aluminum, high nickel alloys, and carbon steel to a wide range of Atlanta, GA 404-873-2881 industries. Our in-house processing allows us to deliver parts ready 4C GRADIENT REVERSE USE: ALL 4C/DIGITAL PRINTING ON DARK BACKGROUND for the next stage of processing or assembly. Chicago, IL 800-624-6785 u Serving customers in a broad range of markets, including transportation, Dallas, TX 800-947-9823 fabrication, petrochemical and food service 3C SPOT COLOR Houston, TX 800-231-8890USE: RESTRICTIVE PRINTING, EMBROIDERY LINE ART u 8 locations nationwide in major metals marketsUSE: EMBOSSING, ENGRAVING, SPECIALTY Mobile, AL 800-817-8335 u Over 55 years of industry experience GRAYSCALE Pittsburgh, PA 724-453-3000USE: B/W PRINTING u One of the nation’s largest inventories of specialty metals Riverside, CA 951-789-3010 u Protective film distribution partner with 3M 3C SPOT COLOR Tulsa, OK 800-279-4515LINE ART u Premiere source for polishing and buffing USE: EMBOSSING, ENGRAVING, SPECIALTY USE: RESTRICTIVE PRINTING, EMBROIDERY MAIN STEEL GRAYS & BLACK u Sheet, coil, plate (including tread plate), bar, tubing and structural shapes MAIN STEEL GRAYS & BLACK ISO 9001-2008E certified DIAMOND DROP SHADOW USE: BEHIND “ROLLED M” MARK ON 4C AND GRAYSCALE VERSIONS DIAMOND DROP SHADOW (MULTIPLY LAYER) USE: BEHIND “ROLLED M” MARK ON 2C/0M/0Y/18K 5C/0M/0Y/45K 23C/2M/0Y/77K 0C/0M/0Y/100K 207R/212G/216B 148R/156G/161B 69R/85G/96B 0R/0G/0B #CFD4D8 #949CA1 #455560 #000000 4C AND GRAYSCALE VERSIONS (PMS 428) (PMS 430) (PMS 432) (PMS PROCESS BLACK) (MULTIPLY LAYER) MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL 2C/0M/0Y/18KLIGHT YELLOW MID YELLOW DARK YELLOW 5C/0M/0Y/45KLIGHT BLUE MID BLUE DARK BLUE 23C/2M/0Y/77K 0C/0M/0Y/100K oC/10M/100Y/0K oC/16M/100Y/0K oC/28M/100Y/6K 100C/73M/0Y/2K 100C/72M/0Y/32K 100C/78M/0Y/54K 255R/221G/0B 255R/210G/0B 238R/177G/17B 0R/84G/164B 0R/62G/126B 0R/36G/93B #FFDD00 #FFD200 #EEB111 #0054A4 #003E7E #00245D 207R/212G/216(PMS 109) (PMS 116) B (PMS 124) 148R/156G/161B(PMS REFLEX BLUE) (PMS 281) (PMS 2767) 69R/85G/96B 0R/0G/0B #CFD4D8 #949CA1 #455560 #000000 (PMS 428) (PMS 430) (PMS 432) (PMS PROCESS BLACK) MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL LIGHT YELLOW MID YELLOW DARK YELLOW LIGHT BLUE MID BLUE DARK BLUE oC/10M/100Y/0K oC/16M/100Y/0K oC/28M/100Y/6K 100C/73M/0Y/2K 100C/72M/0Y/32K 100C/78M/0Y/54K 255R/221G/0B 255R/210G/0B 238R/177G/17B 0R/84G/164B 0R/62G/126B 0R/36G/93B #FFDD00 #FFD200 #EEB111 #0054A4 #003E7E #00245D (PMS 109) (PMS 116) (PMS 124) (PMS REFLEX BLUE) (PMS 281) (PMS 2767) GRAYSCALE USE: B/W PRINTING LINE ART USE: EMBOSSING, ENGRAVING, SPECIALTY MAIN STEEL GRAYS & BLACK DIAMOND DROP SHADOW USE: BEHIND “ROLLED M” MARK ON 4C AND GRAYSCALE VERSIONS (MULTIPLY LAYER) 2C/0M/0Y/18K 5C/0M/0Y/45K 23C/2M/0Y/77K 0C/0M/0Y/100K 207R/212G/216B 148R/156G/161B 69R/85G/96B 0R/0G/0B #CFD4D8 #949CA1 #455560 #000000 (PMS 428) (PMS 430) (PMS 432) (PMS PROCESS BLACK) MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL LIGHT YELLOW MID YELLOW DARK YELLOW LIGHT BLUE MID BLUE DARK BLUE oC/10M/100Y/0K oC/16M/100Y/0K oC/28M/100Y/6K 100C/73M/0Y/2K 100C/72M/0Y/32K 100C/78M/0Y/54K 255R/221G/0B 255R/210G/0B 238R/177G/17B 0R/84G/164B 0R/62G/126B 0R/36G/93B #FFDD00 #FFD200 #EEB111 #0054A4 #003E7E #00245D (PMS 109) (PMS 116) (PMS 124) (PMS REFLEX BLUE) (PMS 281) (PMS 2767) MAIN STEEL – YOUR SUPPLY CHAIN FROM START TO FINISH INVENTORY SIZES Available in Various Lengths Sheet, Coil, Plate, Plate Coil, Bar (Round, Hex, Square, Flat), Tubing SHEET TUbING (Round, Square, Rectangular, Polished or Mill Finish), Structural Shapes, 7 ga. – 28 ga. (Polished & Mill Finish) Tread Plate, Expanded Metal Up to 72” wide Round: .250" – 12" OD Aluminum Square: .50" – 12" Stainless PLATE (2B, 2D, #3, #4, BA, Mirror) (Prepaint, Mill Finish, Buffed, Rectangle: 3/16" – 4" thick .50" x 1" thru 12" x 4" 201, 201LN Brushed, Mirror) 3003 /3003 Bright Tread Up to 120" wide Wall Thickness: 301 .035" – .500" 304, 304L, 304H 5052/5052 Tread PLATE COIL 5083/5083 Tread 309, 309H 3/16" – 1/2" Structural SHAPES 5086/5086 Tread 310,310H Up to 72" wide Angle: (Equal & Unequal) 316, 316L, 316H 5454 3/4" – 4" 317L 6061 bAR 1/8" – 1/2" thick 321, 321H Round: 1/8" – 16" Channel: 2" – 12" CARbON 330 Hex: 1/4" – 3" Tee: 4" Cold Rolled 347, 347H Square: 1/4" – 3" Pre-Paint, Galvanized, Flat: 1/8" – 2" thick Tread Plate 410S Galvannealed, Aluminized Up to 12” wide 1/8" – 1/4" thick 430 Up to 60" wide NICkEL Alloys Duplex 200, 201 Expanded Metal 2101 400 Various Sizes 2205 600, 601, 625 2507 800, 800H, 800HT, 825 PROCESSING CAPAbILITIES SHEET/COIL POLISHING Plasma Cutting PROTECTIVE FILM Standard, custom and pattern Up to 4" thick finishes—we are polishing experts! Master Distributor to Laser FILMS Sheet: Widths to 60", Plasma Burning Metals MARkET lengths to 220" 3M Distributor Up to 6" x 132" wide Plate: Widths to 72", x 504" long Water & Solvent Based lengths to 336" HIGH DEF Plasma CUT-TO-LENGTH Up to 3" x 120" wide .012 – .500" thick x 360" long MAIN STEEL CORPORATE IDENTITY 3" – 96" wide RANGED LOGO VERSIONS & COLOR PALETTE NOTE: PREFERRED VERSION 12" – 612" long Beveling 5-8-12 Single: 3/8" – 2" thick slitting & blankING Double: 5/8" – 3" thick .015" – .250" thick 4C GRADIENT .750 – 60" slit coil widths EDGING USE: ALL 4C/DIGITAL PRINTING NOTE: FOR WEB, STRAIGHT CONVERT TO RGB Up to 1/2" thick x 12" wide OR REFERENCE RGB/HEX VALUES BELOW. Buffing Widths to 144" Laser Cutting lengths to 480" grinding Corporate Headquarters Shearing 2200 Pratt Blvd | Elk Grove Village, IL 60007 stamping 4C GRADIENT REVERSE Up to 1/2" thick x 144" wide USE: ALL 4C/DIGITAL PRINTING ON 800-624-6785 DARK BACKGROUND www.mainsteel.com SAwING maChining Centers Up to 17" tall x 24" wide ISO 9001-2008E certified ©2013 Main Steel, A Shale-Inland Company 3C SPOT COLOR USE: RESTRICTIVE PRINTING, EMBROIDERY GRAYSCALE USE: B/W PRINTING LINE ART USE: EMBOSSING, ENGRAVING, SPECIALTY MAIN STEEL GRAYS & BLACK DIAMOND DROP SHADOW USE: BEHIND “ROLLED M” MARK ON 4C AND GRAYSCALE VERSIONS (MULTIPLY LAYER) 2C/0M/0Y/18K 5C/0M/0Y/45K 23C/2M/0Y/77K 0C/0M/0Y/100K 207R/212G/216B 148R/156G/161B 69R/85G/96B 0R/0G/0B #CFD4D8 #949CA1 #455560 #000000 (PMS 428) (PMS 430) (PMS 432) (PMS PROCESS BLACK) MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL MAIN STEEL LIGHT YELLOW MID YELLOW DARK YELLOW LIGHT BLUE MID BLUE DARK BLUE oC/10M/100Y/0K oC/16M/100Y/0K oC/28M/100Y/6K 100C/73M/0Y/2K 100C/72M/0Y/32K 100C/78M/0Y/54K 255R/221G/0B 255R/210G/0B 238R/177G/17B 0R/84G/164B 0R/62G/126B 0R/36G/93B #FFDD00 #FFD200 #EEB111 #0054A4 #003E7E #00245D (PMS 109) (PMS 116) (PMS 124) (PMS REFLEX BLUE) (PMS 281) (PMS 2767).
Load more

Recommended publications
  • Guide to Stainless Steel Finishes
    Guide to Stainless Steel Finishes Building Series, Volume 1 GUIDE TO STAINLESS STEEL FINISHES Euro Inox Euro Inox is the European market development associa- Full Members tion for stainless steel. The members of Euro Inox include: Acerinox, •European stainless steel producers www.acerinox.es • National stainless steel development associations Outokumpu, •Development associations of the alloying element www.outokumpu.com industries. ThyssenKrupp Acciai Speciali Terni, A prime objective of Euro Inox is to create awareness of www.acciaiterni.com the unique properties of stainless steels and to further their use in existing applications and in new markets. ThyssenKrupp Nirosta, To assist this purpose, Euro Inox organises conferences www.nirosta.de and seminars, and issues guidance in printed form Ugine & ALZ Belgium and electronic format, to enable architects, designers, Ugine & ALZ France specifiers, fabricators, and end users, to become more Groupe Arcelor, www.ugine-alz.com familiar with the material. Euro Inox also supports technical and market research. Associate Members British Stainless Steel Association (BSSA), www.bssa.org.uk Cedinox, www.cedinox.es Centro Inox, www.centroinox.it Informationsstelle Edelstahl Rostfrei, www.edelstahl-rostfrei.de Informationsstelle für nichtrostende Stähle SWISS INOX, www.swissinox.ch Institut de Développement de l’Inox (I.D.-Inox), www.idinox.com International Chromium Development Association (ICDA), www.chromium-asoc.com International Molybdenum Association (IMOA), www.imoa.info Nickel Institute, www.nickelinstitute.org
    [Show full text]
  • Building a Slip-Joint Folder
    Building a Slip Joint Folder By Steve Culver, Master Smith [email protected] www.culverart.com Part 1 of 2 This is part 1of 2 of Building a Slip Joint Folder by Steve Culver, Master Smith. This is a step by step tutorial on building a slip joint folder with a single bolster. Raw materials for the knife: ATS-34 steel for the blade and spring, 410 stainless sheet for the liners and bolsters, amber stag for the handle material. Page 1 of 23 Surface grinding a few thousands off each side of the ATS-34 to remove the mill scale. I will also surface grind the liner and bolster material as I believe that removing the mill finish helps with making a sound connection when spot welding the bolsters to the liners. Tracing around the pattern onto the ATS-34 for drilling the blade pivot and spring pin holes. Page 2 of 23 Drilling the blade pivot and spring pin holes. The spring pattern is aligned with the previously drilled rear pin hole and clamped to the ATS-34. The center pin hole is drilled through the hole in the pattern. Page 3 of 23 The ATS-34 is covered with layout dye, then the patterns for the blade and spring are aligned with pins and the outlines of the patterns are scribed onto the ATS-34 with an Exacto knife. Sawing out the blade and spring. Page 4 of 23 Profile grinding the blade on my KMG belt grinder. I have carefully adjusted the platen to 90 degrees to the work rest.
    [Show full text]
  • 5V Crimp Detail Manual
    Table of Contents Important Information 2 Installation Information 4 Technical Information 5 Trims and Flashings Illustration 6 Roofing Installation Details Fascia Cover (FC-5/FC-7/FC-9) 8 Eave Drip (ED-1) 9 Eave Flashing (EF-3) 10 Preformed Valley (PV-1/PV-2) 11 End Wall Flashing (EW-1) 12 Side Wall Flashing (SW-1) 13 Transition Flashing (TF-1) 14 Gambrel Flashing (GF-1) 15 Gable Rake (GR-2) 16 Gable Rake (GR-4) 17 High Side Eave (HS-2) 18 Hip Cap (RC-2) 19 Ridge Cap (RC-3) 20 Ridge Cap (RC-8) 21 Vented Ridge with Venturi Vent 22 Vented Ridge with Miami Dade Profile Vent 23 Pipe Boot 24 Fastener Guide 25 Sealants and Accessories 26 Helpful Formulas 27 Flashing Angle Specifier Chart 28 5V-Crimp Important Information Miami-Dade County and Local Code Compliance Southeastern Metals’ 26 Gauge 5V-Crimp products are Finishes Miami-Dade County approved and comply with the 40-year warranted SemCoat Plus is a fluoroceram most recent testing requirements. Contact our techni- premium coating manufactured by BASF/Morton cal department for a copy of our current Miami-Dade International Inc. It contains 70% Kynar 500 or Hylar County NOA compliance report if one is required for 5000 PVDF resin over Galvalume ASTM-A792 your purposes. structural steel grade 50. Building codes for metal roofing applications vary 35-year warranted SemCoat SP is a siliconized poly- by county and project. For information regarding ester premium coating applied to a galvanized steel pertinent building code requirements and ordinances, substrate coated with zinc (G90).
    [Show full text]
  • The Identification and Prevention of Defects on Anodized Aluminium Parts
    The Identification and Prevention of Defects on Anodized Aluminium Parts Chiswick Park, London, extruded and anodised aluminium louvres. by Ted Short, Aluminium Finishing Consultant © Metal Finishing Information Services Ltd 2003. 1 Reproduction of any part of this document by any means without the prior written permission of the publisher is strictly prohibited. Table of Contents - Click a heading to view that section Summary .................................................................................................................................................................................... 4 Introduction ............................................................................................................................................................................... 5 Categorisation of Defects........................................................................................................................................................... 6 Defect recognition – General ...................................................................................................................................................... 7 Part 1. Pitting Defects ................................................................................................................................................................ 9 1a. Atmospheric corrosion of mill finish sections ........................................................................................................................... 9 1b. Finger print corrosion of
    [Show full text]
  • Standard Details & Total Systems
    AGRICULTURAL LIGHT COMMERCIAL RESIDENTIAL GRANDRIB 3 PLUS, GRANDRIB, GRG ,MIGHTI-RIB, PROCLAD, HORIZON CLIMAGUARD, FABRIB, ENDURACOTE, FABRAL, FABRAL CORE are registered trademarks of OmniMax International, Inc. STANDARD DETAILS & TOTAL SYSTEMS UL is the trademark of UL LLC FOR METAL ROOFING AND SIDING Galvalume is the trademark of BIEC International Inc. © Fabral 2018 All rights reserved. Fabral.com 98-32-161 05/2019 TABLE OF CONTENTS Installation Instructions ......... 3 Trim Details Estimating & Roof Types ........ 5 Post Frame .............................................23 Load Tables & Testing ........... 6 Residential .............................................38 Roof & Wall Systems System Components Steel Exposed Fastener Panels Flashing and Trim ..................................47 Grandrib 3 ............................................... 7 Soffits.....................................................47 Grandrib 3 Plus ....................................... 7 Underlayment .........................................47 GRG ......................................................... 7 CondenStop® ..........................................47 Mighti-Rib ............................................... 8 Polycarbonate Panels .............................47 5V Crimp ................................................. 8 Liner Panels ...........................................47 ProClad ................................................... 8 Snow Retention ......................................49 Prime Rib ...............................................
    [Show full text]
  • Defining Machinability
    Machinability Survival Guide CLEVELAND 4635 West 160th - Cleveland, Ohio 44135 Telephone: (216) 267-8044 ! Wats: (800) 321-1820 ! Fax: (216) 267-7983 Midland E-Mail: [email protected] CLEARWATER luminum 4522 107th Circle - Clearwater, Florida 33762 A Telephone: (727) 572-9505 ! Wats: (800) 253-6413 ! Fax: (727) 573-0191 CORP. E-Mail: [email protected] URL: http://www.midlandaluminum.com UNDERSTANDING MACHINABILITY • Defining Machinability • SMS Quality Considerations • Screw Machine Terms and Definitions • Complaint Response Understanding the Metallurgist DEFINING MACHINABILITY “The machinability of a metal is similar to the palatability of wine - easily appreciated but not readily measured in quantitative terms." Rod, Bar and Wire Understanding Machinability CUSTOMER DEMANDS *Has an alloy and temper been specified *Does the finished part have any tight tolerances *Are there any surface finish requirements *Is the OD of the rod used in the finished part *Are there any secondary machining operations *Any government or customer specifications SHOP CHARACTERISTICS *What kind of screw machines are being used *What type of coolant is being used *How established is the shop in the marketplace *What type of tool material do they use *How clean is the shop *Is it a lob shop or captive shop SMS QUALITY CHARACTERISTICS *Does the chip size cause you any problems *Are they able to meet the dimensional tolerance *Are they able to meet surface finish requirements *Is the current tool life acceptable *Is the product consistent from load to load *Is diameter length and straightness acceptable DEFINING MACHINABILITY One of the most important items that needs to be determined when visiting an end user of screw machine stock is the type of characteristics of the rod or bar they are looking for.
    [Show full text]
  • METALS REFERENCE GUIDE the Following Pages Rep- Resent Sizes, Weights, and Dimensions of Carbon Steel, Stainless Steel and Alumi- Num Available from Stock
    METALS REFERENCE GUIDE The following pages rep- resent sizes, weights, and dimensions of carbon steel, stainless steel and alumi- num available from stock. With one of the largest non-mill inventories in the U.S.A., stocked in six service centers, we have what your project requires. As an added service, all of our facilities maintain pro- cessing capabilities in-house. Whether you need material punched, flame cut, plasma cut, saw cut, sheared, shot blasted, painted, or bent, we can get the job done. On behalf of the Stein fam- ily and over 500 dedicated professionals, we thank you for your past patronage and hope to serve your needs again soon. Celebrating Over 50 Years of Service! Metal Reference Guide STEEL ALUMINUM ANGLES PlatES ANGLES . .26 . .48 Bar Angles . 4 Structural Angles....5-6 ROUND BARS CHANNELS BAR GRatinG . 19-20 . .49 . .44 SHEETS DIAMOND TREAD PlatES BEAMS . .52 Hot Rolled, Cold Rolled and Galvanized.... 27-28 PIPE Junior Beams . 8 Standard Beams . 7 SQUARE BARS . .54 Wide Flange Beams. 8-15 . .20 PlatES CHANNELS STRIP . .52 Bar Channel . 18 . .21 REctanGULAR MC Shapes BARS (Car, Ship and Jr.) 17-18 . .51 Stair Stringer . .18 Standard Channels....16 REctanGULAR TUBE TUBE CONCRETE REIN- Rectangular Tube..31-33 . .53 FORCING BARS Round Tube .........34 . .21 Square Tube . .29-31 ROUND BARS EXpandED MEtal UNIVERSAL MILL . 49-50 PlatES . .25 SHEETS Flattened . 43 Grating ............43 . .50 Standard...........42 STAINLESS NEW! SQUARE TUBE Flat BARS STEEL . .53 . 22-24 Stainless Angles . .44 Stainless Channels....45 FLOOR PlatES Decimal Equivalents ...58 Stainless Flats.......45 English and Metric .
    [Show full text]
  • Introduction to Aluminum Sheet the Aluminum Transportation Group Presenter
    Introduction to Aluminum Sheet The Aluminum Transportation Group Presenter Debdutta Roy, Ph.D. Novelis Senior Scientist, R&D Automotive 2019 Aluminum Transportation Group Presenter Russ Long Arconic Chief Engineer – Ground Transportation Products 2019 Aluminum Transportation Group Day 1 Agenda • Sheet production – flowpath • Aluminum alloys commonly used for BIW and closures • Sheet properties • Yield, ultimate and elongations as received • Properties after paint bake • Natural aging • Formability measures • Joining – spot welding, SPR, adhesives, flow drill screws, etc. • Design example – aluminum hood, aluminum door 2019 Aluminum Transportation Group Automotive Aluminum Sheet: Production Flow Path and General Metallurgy The Aluminum Transportation Group Overview • Application • Requirements guide ❑ Heat Treatable • Alloy selection Inner Panels Inner (Precipitation Attachments Hardenable) 6xxx ❑ Non Heat Treatable 5xxx BodyStructure Body in White in Body Typical Process Flow Hot Rolling Cold Rolling Annealing 2019 Aluminum Transportation Group Cast House Process Flow (DC Casting) Melting + skimming Furnace treatment In line treatment Batch Degassing preparation Melting furnace Casting furnace Ingots Casting Grain refiner Filtration 2019 Aluminum Transportation Group Cast House Process Flow (DC Casting) • Heavy gauge scrap + major alloying additions to reach target compositions is loaded into large melting furnaces. • If necessary, final alloying additions are made in the holder. This is the last chance to control chemical composition. 2019 Aluminum Transportation Group Cast House Process Flow (DC Casting) TREATMENT GAS (Ar + Cl2) Degassing: removal of hydrogen from molten metal by bubbling a mixture of gases through the melt. Fluxing: causes impurities, such as alkaline, sodium, and lithium to rise to the surface of the bath. Skimming is done to remove the dross from the surface of the molten metal.
    [Show full text]
  • Chemical Accelerator Mass Finishing Stainless Steel Deburring
    CLINIC MASS FINISHING pfonline.com/experts Chemical Accelerator Mass Finishing and can we use vibratory methods Q. We manufacture hardened steel gears of all types and sizes. for our requirements?– J.K. We have a vibratory machine, but it’s been ineffective in A. You have three finishing require- smoothing our grinding lines. Can you recommend a vibra- ments: deburring, refinishing and tory or mass finishing process?– H.P. refining an existing finish. These A. We recommend a chemical accelerator process in your are all excellent applications vibratory machine. The machine must have a precise flow- for vibratory/mass finishing. through soap compound system, and coated or stainless Let’s define the two drains. Chemical accelerator finishing processes can be finishing specifications accomplished in vibratory, high-energy centrifugal disc, (2B and #8) and then spindle and drag finishing systems. The process produces discuss the vibratory super surface refinement (in the 2-to-4-Ra finish range) and process solutions. keeps edge radiusing to a minimum. Finish Specification: Chemical accelerators (oxalic acid, phosphates or citric Stainless steel finishes acids) are metered into and carried by a cutting or non- have been standardized cutting, high-density (110 to 140 lbs per cu ft), preformed by the Stainless Steel media. The accelerator chemical continuously oxidizes the Sheet Manufacturers surface of iron-based and some non-ferrous metal alloys, Association. Two of the enabling the high-density ceramic media to remove metals standard finishes are PAT WENINO / M.C. Finishing at much higher rates. The accelerator system cuts, refines, the 2B and #8. Below [email protected] and brightens surfaces within the same machine and media.
    [Show full text]
  • Here's a 12 Problem in What He Did with the Firearm
    1 IN THE UNITED STATES DISTRICT COURT FOR THE 2 WESTERN DISTRICT OF OKLAHOMA 3 4 UNITED STATES OF AMERICA, ) ) 5 ) Plaintiff, ) 6 vs. ) Case No. CR-08-41-L ) 7 ) LARRY DOUGLAS FRIESEN, ) 8 ) ) 9 Defendant. ) 10 11 12 TRANSCRIPT OF JURY TRIAL 13 VOLUME IV HAD ON SEPTEMBER 22, 2008 14 BEFORE THE HONORABLE TIM LEONARD, U.S. DISTRICT JUDGE, PRESIDING 15 16 17 A P P E A R A N C E S 18 19 Mr. Edward Kumiega, U.S. Attorney's Office, 210 West Park Avenue, Suite 400, Oklahoma City, OK 73102, appearing for 20 the United States of America 21 Mr. Mack Martin and Ms. Kendall Sykes, Martin Law Office, 125 Park Avenue, Fifth Floor, Oklahoma City, OK 73102, 22 appearing on behalf of the defendant 23 24 25 B. JEANNE RING, RDR UNITED STATES COURT REPORTER 200 NW 4th Street, Suite 3011E Oklahoma City, OK 73102 [email protected] - ph (405) 609-5603 546 1 I N D E X 2 WITNESS PAGE 3 CHARLES ERB 4 Direct Examination ........................556 Cross-Examination .........................592 5 LENNIS SAVAGE 6 Redirect Examination ......................651 Recross-Examination by ....................662 7 GRANT KEMMERER 8 Direct Examination ........................672 Cross-Examination .........................682 9 Redirect Examination ......................692 10 MIKE DAVENENPORT Direct Examination ........................699 11 Cross-Examination .........................708 Redirect Examination ......................715 12 Recross-Examination by ....................719 13 JULIE WHITE Direct Examination ........................723 14 Cross-Examination .........................729 15 ELIZABETH GILLIS Direct Examination ........................733 16 Cross-Examination .........................739 Redirect Examination ......................743 17 Recross-Examination by ....................745 Redirect Examination ......................745 18 19 20 21 22 23 24 25 B.
    [Show full text]
  • Structural Steel Part 1
    Division 05 Metals SECTION 05120 - STRUCTURAL STEEL PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Structural steel. 2. Architecturally exposed structural steel. 3. Grout. B. Related Sections include the following: 1. Division 1 Section "Quality Requirements" for independent testing agency procedures and administrative requirements. 2. Division 5 Section "Steel Deck" for field installation of shear connectors. 3. Division 5 Section "Metal Fabrications" for miscellaneous steel fabrications not defined as structural steel. 1.3 DEFINITIONS A. Structural Steel: Elements of structural-steel frame, as classified by AISC's "Code of Standard Practice for Steel Buildings and Bridges," that support design loads. B. Architecturally Exposed Structural Steel: Structural steel designated as architecturally exposed structural steel in the Contract Documents. 1.4 PERFORMANCE REQUIREMENTS A. Connections: Provide details of simple shear connections required by the Contract Documents to be selected or completed by structural-steel fabricator to withstand ASD- service loads indicated and comply with other information and restrictions indicated. 1. Select and complete connections using schematic details indicated and AISC's "Manual of Steel Construction, Allowable Stress Design," Part 4. 2. Engineering Responsibility: Fabricator's responsibilities include using a qualified professional engineer to prepare structural analysis data for structural-steel connections. B. Construction: Type 1, rigid frame. Division 05 Metals 1 SUBMITTALS B. Product Data: For each type of product indicated. C. Shop Drawings: Show fabrication of structural-steel components. 1.
    [Show full text]
  • 6061 Aluminum
    Alro Steel Metals Guide Aluminum Bar, Sheet, Plate, Structurals, Tube & Pipe Aluminum Cold Finished Bar ................. 6-2 thru 6-16 Aluminum CF Tolerances ..................... 6-17 thru 6-18 Aluminum Extruded Bar ....................... 6-19 thru 6-31 Aluminum Extruded Structurals .......... 6-32 thru 6-40 Aluminum Tube & Pipe ........................ 6-41 thru 6-51 Aluminum Extruded Tolerances .......... 6-52 thru 6-57 Aluminum Sheet & Plate ...................... 6-58 thru 6-65 Aluminum Cast Plate ............................ 6-66 thru 6-74 Aluminum Tread Plate .......................................... 6-75 Sheet & Plate Tolerances & Data ........ 6-76 thru 6-92 Comparative Characteristics .............. 6-93 thru 6-97 Specification Cross Reference .......... 6-98 thru 6-102 NOTE: Typical properties shown for alloys are not guaranteed by publication herein. In most cases, the values are averages for various sizes, product forms and manufacturing practices. The typical properties do not exactly represent particular products or sizes. The data is intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes. Aluminum WARNING: These products can potentially expose you to chemicals including Nickel, Chromium, Lead, Cobalt, Mercury and Beryllium, which are known to the state of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov 6-1 alro.com ® Alro Steel Metals Guide Aluminum Rod, Bar and Wire (Cold Finished) Rounds • Flats • Hexagons • Squares Alloy Descriptions and Applications 2011 – This free machining alloy compares favorably with free cutting brass. It is the most suitable alloy for machining on automatics, milling machines, lathes, planers, shapers and other machine tools, and is the most widely used alloy for all types of screw machine parts.
    [Show full text]