800-741-0015 Brownells 200 South Front Street Montezuma, IA 50171 Br Customer

PRSRT STD U.S. POSTAGE

PAID 800-741-0015 Brownells 200 South Front Street Montezuma, IA 50171 br Customer

Number Call Toll Free to Order o wnells.

Source Code com/dream AR-15 AK-47 AR-S Tavor Dream It, t

yle 308 page 14 page page 10 page 6 page 2 page RifLe

Build It #100-015-987 308 AR M5 UPPERRECEIVER 800-741-0015 •brownells.com Build Your BigBore AR On A

bro #100-015-985 308 AR M5LOWER RECEIVER

Edition

wnells Solid Foundation

Perfect matchfor theM5lower; parts compatibleMachined forging Sale Ends06/30/15 with DPMS-pattern 308 withDPMS-pattern forward assist & port cover forward assist&port

.com/DREAM $129.99 $159.99 ON SALE ON SALE pre-installed

ea. ea.

Brownells.com/dream10

2 /EOTECH CQB T-DOT HOLOGRAPHIC SIGHT “T” Aiming Point Calibrated To Eliminate Guesswork In Close-Range Targeting The Brownells CQB T-Dot Sight is designed for combat and competition shooters who frequently address targets at close quarters. It corrects a common problem with combat-zeroed optics mounted on an AR-type rifle: the point of impact is significantly lower than the point of aim at close quarters distances. Reticle Built by EOTech exclusively for Brownells and based on the popular EOTech EXPS2, the CQB T-Dot eliminates the “guesstimating” when aiming at these targets. It retains the parent design’s 65 MOA circle illuminated reticle with two aiming points calibrated for 50-200 yards and 500 yards. The bottom of the T-Dot’s circle is left open, with a “T” indicating a precise aiming reference zeroed for about 7 yards. All aiming points are calibrated for 5.56mm NATO ammunition. The CQB T-Dot clamps directly to a MIL-STD 1913 Picatinny rail (only 23/4" rail space required) with a EOTECH built-in quick-detach throw-lever mount. A built-in riser enables lower one-third co-witness with A2-type iron sights. The reticle has 20 1 HHS SIGHT/MAGNIFIER SETS brightness settings selected using the control buttons on the left side. SPECS: Aluminum housing, hardcoat anodized, matte black. 3.5" long x 2.4" wide x 2.8" high. 11.2 oz. (317g) wt. Windage/elevation adj. range +/- Versatility Of A Red Dot Plus Long-Range Capability 40 MOA in 1/2 MOA clicks (1/2" at 100 yards). Uses one (1) CR-123A lithium battery; approx. 600 hour battery life. Of A Traditional Scope #080-000-971KW CQB T-Dot Sight, 9K549B99 �� $ 549.99 Combines an EXPS series sight with the G33.STS magnifier to provide a sighting system with maximum versatility. Magnifier aids target acquisition at longer ranges and can be quickly flipped to the side for clear access to the non-magnifying EXPS alone ADVANCED ARMAMENT CORP. AR-15/M16/AR .308 in close-quarter engagements. Both units feature quick release 3 BLACKOUT FLASH HIDERS & MUZZLE BRAKES levers and will attach easily to any flattop AR-15/M16 rifle. HHS I Non-Mount has a night vison compatible EXPS3-4 sight featuring a ballistically Efficient Flash Suppression; Models Available That Accept AAC Sound Suppressors compensated reticle calibrated for the 5.56 NATO cartridge fired Efficiently reduces muzzle flash to help minimize the blinding effect of the flash in low-light conditions. from a carbine-length barrel, with aiming dots for engaging targets Short OAL and flat, smooth muzzle face prevents hang-ups and aids in unencumbered weapon deployment. at 0-300m, 400m, 500m, and 600m. HHS II has an EXPS2-2 Precision machined from heat-treated steel and finished with AA’s proprietary SCARmor™ coating that gives sight featuring two vertically-aligned 1 MOA aiming dots ballistic- high resistance to blast erosion. Non-Mount models provides flash suppression only. 18T flash hider accepts 5IT 7.62 matched for the M4 carbine at 50/200m and 500m. Not night Advanced Armament’s first generation, fast attach silencers only. 51T models have an integral 51-tooth ratchet Hider vision compatible. mount that accepts AA sound suppressors. 90T models have an integral 90-tooth ratchet mount that accepts SPECS: Aluminum housing, hardcoat anodized, matte black. 8.1" AA SR-5 and SR-7 silencers. Installation Tool precisely fits the tines of all Blackout flash hiders for easy, (20.6cm) approx. OAL with magnifier installed behind sight, 2.25" (5.7cm) installation without risk of damaging the tines. ba wide, 2.75" (7cm) high. 11.2 oz. (317g) wt. EXPS3-4 runs on one CR-123A SPECS: 17-4 stainless steel, SCARmor finish, matte black. Approx. 2½" (6.4cm) OAL. 7/8" (2.2cm) O.D. lithium battery, included. Battery life is 500-600 hrs at setting 12. #100-007-265KW HHS I EXPS3-4/Magnifier Set �� $ 1,089.00 STOCK # MODEL CALIBER THREAD PITCH ACCEPTS SUPP. PRICE Non-Mount Hider 5.56 1/2"-28 No #100-011-155KW HHS II EXPS2-2/Magnifier Set �� 1,019.00 #276-000-010KW $ 59.99 276-000-026KW 18T 5.56 Hider 5.56 1/2"-28 Yes $ 99.99 #276-000-013KW 51T 5.56 Hider 5.56 1/2"-28 Yes $ 99.99 #276-000-022KW 51T 5.56 Brake 5.56 1/2"-28 Yes $ 147.99 276-000-046KW 90T T 5.56 Hider 5.56 1/2"-28 SR-5/SR-7 only $ 119.00 SHOOT LIKE A PRO #276-000-016KW Non-Mount Hider 7.62 5/8"-24 No $ 59.99 276-000-027KW 18T 7.62 Hider 7.62 5/8"-24 Yes $ 99.00 #276-000-014KW 51T 7.62 Hider 7.62 5/8"-24 Yes $ 99.99 5 WE CARRY SUPERIOR PRODUCTS #276-000-023KW 51T 7.62 Brake 7.62 /8"-24 Yes $ 147.99 FOR SUPERIOR PERFORMANCE 276-000-047KW 90T T 7.62 Hider 7.62 5/8"-24 SR-7 Only $ 119.00

Stock numbers shown in red indicate the Order Line Hours Gun Tech Hours ab product is made or assembled in the U.S.A. 800-741-0015 800-741-0015 This information is not available for all items at time of catalog 7:30 a.m. – 5 p.m. M-F CST 8:30 a.m. – 4:30 p.m. M, W, Th, F CST production; nor does it imply that foreign merchandise is of lesser Order Recording Lines Open 9 a.m. – 4:30 p.m. Tues CST quality. We will keep our website current with the latest information. 24 Hours Per Day Walk-In Hours 7:30 a.m. – 4:30 p.m. M-F CST (Grinnell Location) 200 South Front Street, Montezuma, IA 50171 3006 Brownells Parkway, Grinnell, IA 50112 Call Toll Free to Order 800-741-0015 Fax 800-264-3068 • BROWNELLS.COM The horizontal catalog format Sale prices good until 5/28/2015. is a trademark of Brownells.®

OFFICE / 2 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 1 2 3

4 5 7 6 IWI TAVOR Brownells.com/dream10

6 AR-15/M16 MAGAZINES ab The Most Reliable Civilian Magazine Available Anywhere! 4 We’ve been building AR mags for a long time, including multiple contracts for the most demanding customer of all - the U.S. SUREFIRE Department of Defense. The mags we offer to you are built to the exact same quality and specifications, so you get a tough, durable, ultra- G2X PRO DUAL-OUTPUT LED FLASHLIGHT reliable, mag that's built to last and ready to run hard. No jams, Small, Lightweight, With Tremendous Illuminating Power no misfeeds, no hangups. And no frills or gimmicks - these are pure GI-style mags made of mil-spec materials with exacting attention to Compact and durable, high-output lithium-powered handheld fit, finish, and tolerances. The welded aluminum body is hard-anodized light illuminates darkened rooms, entryways, hallways - anyplace for superior corrosion resistance, with a tough, dry-lube coating that you need bright, white light instantly. The G2X Pro has a rugged, eliminates the need for additional lubricants. The glass-fiber reinforced shock- and impact-resistant, corrosion-proof Nitrolon polymer composite follower further guarantees flawless feeding in the harsh body, with an incredibly powerful and nearly indestructible LED operating conditions. Available in classic straight-body 20-round and emitter. Outputs a remarkable 320 lumens in high mode for 2.5 curved 30-round models, both with a choice of a mil-spec stainless steel spring or our high-lubricity, dry-lube-coated chrome silicon hours of runtime or 15 lumens in low mode for up to 45 hours of spring resists spring “set” and is corrosion-resistant certified to 500 hour salt spray standards. runtime in momentary-on and constant-on modes. Runs on two SPECS: Aluminum body, gray hard-anodized with dry-lube coating. Fiberglass-filled, green plastic follower. Available with dry-lube-coated chrome CR-123A batteries. 5.2" (13.2cm) OAL. 4.4 oz. (124g) wt. silicon (CS) spring or stainless steel (SS) spring. #100-011-405KW G2X Pro Flashlight �� $ 63.00 #078-000-107KW 30-Rd AR-15 Magazine, CS �� $ 13.99 #078-000-113KW 30-Rd AR-15 Magazine, SS �� 13.99 #078-000-159KW 20-Rd AR-15 Magazine, CS �� 13.99 #078-000-160KW 20-Rd AR-15 Magazine, SS �� 13.99

GEISSELE AUTOMATICS IWI TAVOR 7 GEN 2 SUPER SABRA TRIGGER 5 Enhances Trigger Control For Precise Long-Range Targeting

Drop-in replacement trigger gives your Tavor an upgraded, two-stage trigger pull that gives MANTICORE ARMS IWI TAVOR you smoother, more precise trigger control. Two-stage configuration allows the Super Sabra to ARCLIGHT RAIL be light and controllable enough for accurate distance shots, but forgiving enough for CQB. The first stage is user-adjustable, so you can tune the first/second stage weight distribution without Greater Strength, More Accessory Mounting compromising the total pull weight. First stage can be adjusted to 3.5-5.5 lbs.; second stage is fixed a 2.0 lbs. Total pull weight can be Versatility For Your Tavor adjusted from 5.5 to 7.5 lbs. The Super Sabra trigger pack is contained in an aluminum housing for easy installation, while keeping the tool Drop-in replacement handguard expands the accessory mounting steel internal components held in correct alignment. Nitride process finish on internal parts gives superb abrasion resistance. versatility of your IWI Tavor rifle. The lightweight, machined alumium SPECS: Machined aluminum housing, Type III hardcoat anodized. S7 tool steel internal parts, hardened nitride finish. Fully compatible with all IWI Advanced Rail Chassis - Lightweight, or ARCLight for short, Tavor rifles. weights a mere 4 oz. and provides greatly enhanced structural #100-014-905KW Geissele Super Sabra Tavor Trigger �� $ 350.00 rigidity, improved ventilation, and ergonomic comfort. It is fully compatible with Magpul® MOE® polymer rail segments and Impact Weapon Components Mount-N-Slot accessories to give you a vastly increased array of accessory mounting options. The ARClight mounts securely to the rifle by an integral rear support tab to the Magpul front mounting screws originally used by the factory handguard, so it MS3/MS4® Sling GEN 2 ab won’t shift under heavy stress or sharp impact. Fully Loaded package comes with one short 5 slot aluminum rail segment, one long 11 slot Latest development of Magpul’s highly versatile and popular “Multi-Mission” tactical sling comes in aluminum rail segment, and a tactical light ring for mounting a 1" three variations. All models can convert almost instantly from two-point to single-point attachment. diameter light with tape switch inside the handguard. Rail segments Nylon webbing, 11/4" wide; polymer and steel hardware. The standard MS3 GEN 2 comes with are lugged to fully engage the ARClight slots and use steel backer Magpul’s alligator-clip style attachment, the ParaclipTM, at both ends. The MS3 GEN 2 Single plates to lock firmly in place. Includes wrenches for instllation and QD has a standard quick-detach pushbutton swivel at one end, a Paraclip at the other. zip ties for securing weapon light cables. MS4 GEN 2 Dual QD sling has quick-release pushbutton swivels at both ends and a SPECS: Aluminum, anodized finish, matte black. 2.2" (5.6cm) high, 5.4" built-in adapter that still allows fast two- to single-point transition. MS3 GEN 2 Single QD (13.7cm) long, 1.9" (4.8cm) O.D. 4 oz. (113.4g) wt. Fits IWI Tavor rifles. #100-013-973KW MS3 GEN 2 Sling, Black �� $ 47.99 #100-014-890KW ARClight Tavor Rail �� $ 124.99 #100-013-976KW MS3 Single QD GEN 2 Sling, Black �� 55.99 #100-014-891KW Fully Loaded ARClight Tavor Rail �� 184.99 #100-013-980KW MS4 Dual QD GEN 2 Sling, Black �� 56.99

ORDERSORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 3 Brownells.com/dream10 AR-15 Parts & Accessories

AERO PRECISION AR-15/M16 STRIPPED UPPER RECEIVER ab Economical Yet High-Quality Upper For Your Custom Build The Aero Precision upper is made of 7075 aircraft aluminum for superior strength and given a super tough, Type 3 hardcoat anodized finish for excellent wear resistance. It features laser-engraved T-marks and an American flag on the Picatinny rail, plus M4-type feed cuts inside for reliable feeding. Compatible with standard, mil-spec AR lowers and components. A really high-quality receiver at a great price! Smooth-Side model does not have provisions for a forward assist, reducing risk of snagging on other gear and giving your rifle a neat, streamlined appearance. SPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Also available with a tough, non-reflective Cerakote finish in Desert Tan or Sniper Gray. All models use .250" pivot and takedown pins. #100-010-612KW Stripped Upper Rec'r, Black ��SALE $ 69.99 100-013-288KW Stripped Upper Rec'r, Desert Tan Cerakote �� $ 97.99 AR-15/M16 100-014-637KW Smooth-Side Upper Rec'r, Black �� 94.99 100-015-123KW Stripped Upper Rec'r, Sniper Gray Cerakote �� 97.99 M4 BUTTSTOCK ab Rugged, Six-Position Adjustment For L.O.P. & Easy Storage Collapsible buttstock similar to the current USGI M4 carbine stock provides convenient six-position length-of-pull adjust¬ment WHITE OAK ARMAMENT to fit different-size shooters, including those wearing body MATCH BARRELS armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, Wylde Chamber Helps toe-mounted steel sling loop, carbine recoil spring and buffer. Maximize Performance With Buttstock is made from extremely tough, fiberglass-reinforced, .223 Or 5.56 Ammo injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR- notches and pre-cut detents for staking to lock plate. Available 15 with both .223 Remington and 5.56x45mm NATO ammunition. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps with Commercial (nominal 1.17" O.D. ) or Mil-Spec (nominal 1.14" for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. 16" barrel is available O.D.) receiver extension tube. Stock interior diameter is matched in standard carbine or SDM profile, based on the Army’s Squad Designated Marksman rifle. It features 12 large flutes to reduce weight and to buffer tube O.D. for a snug fit that eliminates unwanted play and help cooling and has a mid-length gas system. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy rattles. out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. Threaded muzzle accepts a variety of compensators or SPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, flash suppressors. matte black. 83/4" (22.2cm) OAL collapsed; 113/4" (29.9cm) OAL fully SPECS: Stainless steel, natural finish. .750" (1.9cm) O.D. at gas port. Barrel extension .999" (2.5cm) O.D. 6-groove, 1-7" rifling. Muzzle threads: 1/2"-28 tpi. extended. #100-009-769KW .223 Wylde 16” Carbine Barrel ��SALE $ 239.99 #100-009-961KW .223 Wylde 18” Mid-Length SPR Barrel �� $ 269.99 #080-000-545KW Collapsible Buttstock, Commercial �� $ 79.99 100-015-126KW .223 Wylde SDM 16” Mid-Length Barrel �� 369.99 #100-009-962KW .223 Wylde 18” Rifle SPR Barrel �� 269.99 #080-000-941KW Collapsible Buttstock, Mil-Spec ��SALE 49.99

MAGPUL AR-15/M16 PMAG® 30 GEN M3 ab Stock Kit Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience Latest generation of the polymer magazine that revolutionized magazine technology for the AR-15/M16/M4 platform further expands the strength, reliability, and versatility of the original PMAG. The GEN M3 is molded from a polymer formula that delivers even more crush- and impact-resistance, with extra reinforcement in the mag catch and feed BRAVO COMPANY AR-15/M16 lip areas. Redesigned four-way anti-tilt follower ensures even smoother TM feeding, even when contaminated by dust or grit. Pop-off dust cover, BCMGUNFIGHTER STOCK ab included, helps minimize debris intrusion and prevent damage during storage. PMAG 30 - available with solid sides or a clear polymer window Secure Shooting Support In A Light, on each side for at-a-glance load status checks. PMAG 40 has solid Minimal-Profile Package sides. PMAG 20 - curved body helps ensure reliable feeding makes for a Carbine stock combines light weight with minimal bulk - shorter mag that’s easier to handle. PMAG 10 is perfect for hunting and 10-Rd GEN M3 20-Rd GEN M3 Window 30-Rd Standard 30-Rd ideal for competition or tactical operations, especially those other applications where the lowest possible magazine profile is desired. GEN M3 GEN M3 40-Rd GEN M3 involving frequent ingress/egress from vehicles. It still provides a PMAG LR/SR modesl fit AR-style .308 rifles built for the SR-25/M110 comfortable, supportive cheekweld, while a generous synthetic magazine pattern, including ArmaLite® AR 10®, DPMS LR-308, and Remington R-25. rubber recoil pad ensures secure shoulder placement. The exterior #100-011-220KW PMAG 30 GEN M3, Each �� $ 14.20 100-015-263KW PMAG 20 GEN M3, 10-Pak �� $ 127.99 is smooth and free of protrusions or sharp edges that can snag 100-012-634KW PMAG 30 Gen M3, 10-Pak �� 135.00 #100-011-418KW PMAG 10 GEN M3, Each �� 13.25 the sling, the shooter’s other MOLLE gear, or objects inside the #100-011-219KW PMAG 30 GEN M3 Window, Each �� 17.05 100-015-264KW PMAG 10 GEN M3, 10-Pak �� 127.99 vehicle. Includes two ambidextrous QD swivel sockets plus a 100-015-262KW PMAG 30 GEN M3 Window, 10-Pak �� 164.99 #100-011-564KW PMAG 25 LR/SR GEN M3 Window �� 21.80 conventional sling attachment slot. New-design steel adjustment #100-012-633KW PMAG 40 GEN M3, Each �� 18.95 #100-011-563KW PMAG 20 LR/SR GEN M3 �� 18.95 latch ensures the stock’s interface with the receiver extension 100-012-635KW PMAG 40 Gen M3, 10-Pak �� 184.99 #100-011-562KW PMAG 10 LR/SR GEN M3 �� 18.00 cannot be obstructed by dirt or debris, while providing increased #100-011-413KW PMAG 20 GEN M3, Each �� 13.25 torsional strength over conventional pins. The VBOST (Vehicle Borne Operations Sling Tab) works with the shooter’s riggers’ band or bungee to secure the sling against the stock when the rifle is not in use, another useful benefit when operating inside a vehicle. With all these features, the BCMGunfighter stock still weighs a mere 7 Battle Arms Development AR-15/M16 oz., so the vast increase in versatility it gives your rifle doesn’t come Ambidextrous AR-15/M16 Safety Selector ab with the penalty of weighing you down. SPECS: Reinforced, high strength-to-weight-ratio molded polymer, For Easy & Fast Operation Under Stress steel latch. Fits mil-spec receiver extension with 1.14" O.D. Kit includes an M4-type carbine receiver extension tube, buffer spring, buffer, Upgraded safety selector puts oversized levers on both sides of the receiver for easy operation with castle nut, and QD swivel mount end plate. Extension tube - 7075 T6 either hand. Large surface eliminates fumbling and makes the safety easy to hit while wearing gloves. aluminum extrusion, hard-anodized, matte black. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Customize by #100-016-238KW BCMGunfighter Stock, Black �� $ 55.99 putting the larger pad on the side of the receiver most convenient for you. Works in any mil-spec AR-15 #100-016-239KW BCMGunfighter Stock, Flat Dark Earth �� 55.99 receiver. Mounting hardware included. #100-016-337KW BCMGunfighter Stock Kit, Black �� 113.99 #100-005-841KW Standard Ambidextrous Safety Selector, Black �� $ 57.00

OFFICE / 4 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 STREAMLIGHT® GEISSELE AR-15/M16 TACTICAL WEAPON LIGHTS TRIGGERS ab

Powerful, Compact, Feather-Weight Lighting With Laser Sight Option B-GRF RAPID FIRE TRIGGER Gives semi-auto only rifles a Gun-mounted light illuminates dangerous places with intense, white light. Ambidextrous, glass-smooth trigger pull very TLR-1 momentary or constant-on paddle switch lets you control light output to match your needs. similar to the Geissele Super ® High-output C4 LED lamp produces a uniform beam with peripheral illumination and no hot Select Fire trigger designed for spots or shadows. Runs on two CR-123 lithium batteries for up to 2.5 hours of continuous runtime. full-auto weapons in the U.S. Rugged aluminum housing has unique locking bar system with interchangeable locating keys for Special Operations Community. secure mounting directly to MIL-STD 1913 Picatinny, Glock-style, S&W 99, S&W TSW, and Beretta It pulls like a single-stage, but 90-Two accessory rails. Fits all holsters that accept pistols mounted with the earlier Streamlight resets like a two-stage. Includes M-3/-5/-6 series lights. TLR-1 HPL two trigger springs so it can be set up with a pull of either 4 lbs. TLR-1 WEAPON LIGHT or 3.2 lbs. Does NOT covert semi-auto rifles to fully automatic. TLR-1 produces 135 lumens continuous output. TLR-1s increases the light output to 160 lumens SPECS: Steel, black finish. Fits semi-automatic AR-15 and clones with and adds a strobe setting instantly activated by two, rapid, successive taps on the paddle. High-output TLR-1 HL provides up to 630 lumens .154" hammer/trigger pin holes. May be installed on AR-Style .308 rifle of intense white light to illuminate large areas, ideal for clearing a room or searching an alley. Also has programmable strobe setting. TLR-1 that accepts AR-15 triggers. Includes trigger and hammer assemblies, HPL delivers an astonishing 775 lumens of white light with excellent peripheral illumination and maximum down-range performance. springs, hammer pin and instructions. 7 SPECS: Machined aluminum, anodized, matte black . 3¼" (8.3cm) long x 1½" (3.8cm) wide x 1 /16" (3.7cm) high. Uses two CR-123 lithium batteries, #100-014-357KW B-GRF Rapid Fire Trigger ��SALE $ 176.99 included. #100-003-009KW TLR-1 Weapon Light �� $ 109.99 100-011-713KW TLR-1 HL Weapon Light w/High-Output Lamp �� $ 169.99 B-G2S-E TWO-STAGE ENHANCED TRIGGER #100-005-925KW TLR-1s Weapon Light w/Strobe �� 129.99 100-009-755KW TLR-1 HPL Weapon Light �� 119.99 Gives a smooth, light first-stage take up of 2.3 lbs., and a crisp second stage break of 1.2 lbs. TLR-2 WEAPON LIGHT/LASER SIGHT Ideal for use in Squad Designated Expands the TLR-1 system with a high visibility, red 650-660 nm aiming laser to aid in Marksman rifles and similar precise shot placement. Selector switch lets you choose light only, laser only, or light plus laser applications, where accuracy and illumination. Laser is fully adjustable for windage and elevation, with screws mounted in brass reliability are critical. bushings for precise settings and reliable return to zero. TLR-2 produces 135 lumens continuous SPECS: Steel, black finish. Fits AR- light output. TLR-2s increases the light output to 160 lumens and adds a strobe setting instantly 15/M16/M4 and clones with .154" activated by two, rapid, successive taps on the control paddle. TLR-2 HL provides up to 630 hammer/trigger pin holes. May lumens of intense white light to illuminate large areas, ideal for clearing a room or searching an alley. Also has programmable strobe setting. be installed on AR-Style .308 rifle SPECS: Machined aluminum, anodized, matte black . 3¼" (8.3cm) long x 1½" (3.8cm) wide x 1¾" (4.5cm) high. Uses two CR-123 lithium batteries, included. that accepts AR-15 triggers. Includes trigger and hammer assemblies, #100-004-220KW TLR-2 Weapon Light/Laser Sight �� $ 259.99 100-011-714KW TLR-2 HL Weapon Light w/High-Output Lamp ��$ 349.99 springs, hammer pin and instructions. #100-005-924KW TLR-2s Weapon Light w/Laser & Strobe �� 299.99 #100-014-358KW 2-Stage G-G2S-E Trigger �� $ 185.00

TACTICAL ILLUMINATOR MOUNT Tough, polymer mount attaches to AR-15 handguards to accept your TLR-1/-2 or M-3/-5/-6 light. Winged end stop keeps light from sliding off. MAGPUL AR-15/M16 TM SPECS: Polymer, black, matte finish. 80-90 lumens. 3.4" (8.6cm) L, 1.57" (4cm) W, 1.52" (3.8cm) H. 3.3 oz (904 g) wt. Accepts BEV BLOCK ab TLR-1/-2 and M-3/-5/-6 lights. Includes lithium batteries. Mounting hardware and instructions included. Super-Secure Support Of Tactical Illuminator Mount �� #100-000-831KW $ 17.99 Upper & Lower Receivers For Maintenance Work The Barrel Extension Vise (BEV) block securely supports the rifle for installing barral nuts, installing muzzle devices, and other HOPPE’S assembly/maintenance operations. The BEV BORE SNAKE block mounts securely in your bench vise and fits snugly in the mag well to support Fast, Pull-Through Cleaning; Rod, Brush & Patch All In One the lower receiver during maintenance. For upper receiver work, the BEV's steel lugs engage the barrel Scrubs and cleans in a single step. Apply bore cleaner to the front of the cord and oil to extension at the front, while a post at the rear engages the bolt the end. Drop cord into the bore and pull through five times. The built-in, phosphor bronze carrier to provide full-length support, without unwanted flexing, brush and braided floss scrub, clean and oil the bore in just minutes. Washable and reusable; during barrel installation. Included pin helps keep the upper in lightweight design folds neatly away for easy storage and carry. the proper position. The hardness of the forward lugs' steel is SPECS: Braided nylon cord, nylon floss. optimized for durability, yet won't damage the barrel extension. #664-100-022KW .22/.223/5.56mm Rifle Bore Snake �� $ 19.99 Magpul's heavy-duty reinforced polymer is used for other engagement surfaces to protect the aluminum receiver. Works on #664-100-300KW .30 Rifle Bore Snake �� 19.99 both forged and machined AR-15/M16/M4 receivers.

#100-015-280KW Bev Block �� $ 47.95

MAGPUL AR-15/M16 MBUS PRO SIGHT SET ab Minimal Profile With The Extra Strength of Steel MAGPUL AR-15/M16 SUREFIRE Made from case hardened steel ARMORER’S WRENCH ab ULTRA SCOUT LIGHT with a corrosion resistant, melonite finish, these flip up sights fit all Magpul-Quality Tool Eases A Variety Of Key AR Lightweight, Powerful Light Quickly Attaches To Your Firearm 1913 Picatinny rails. Both sights Maintenance Tasks Compact, powerful weapon light produces up to 500 lumens have positive detents to keep them Magpul’s hefty all-steel tool helps you perform a variety of and attaches to accessory rails with integral mount. Won't weigh secured at standard AR sight height key maintenance tasks on the AR platform. It engages both GI- down your rifle. Includes both traditional push-button tailcap, when deployed, but low profile when stowed. Dual aperture rear 3 style and pin-style barrel nuts for free-float tubes. Installs and or remote activation switch with cable that lets you activate it sight features a tool-free windage adjustment and is only /8" above removes rifle receiver extensions and carbine castle nuts, with without changing your firing grip. Features both momentary- the rail when stowed. Front sight has a finger adjustable elevation 7 3 knob on the post, eliminating the need for any tools and sets /16" extended teeth for use with Magpul ASAP plates. Fits the /4" flats on and constant-on modes. LED lamp maximizes output and 1 above the rail when stowed. Narrow width of the front sight makes on standard-sized flash hiders. Can be used as a driver for a /2" helps prolong battery life, and TIR lens gives high-intensity beam torque wrench, with relevant torque specifications stamped on the ideal for all ranges. Thumbscrew clamp lets you quickly mount it compatible with most IR aiming laser and light installations. 7 Magpul tool for quick reference. It even has two flat hammer faces and dismount light. O-ring and gasket seals make it waterproof. SPECS: Steel, melonite finish, black. Rear Sight – 2" (5cm) OAL, 1 /16" 3 7 AND a convenient built-in bottle opener for refreshments after the Available in black or tan. (3.7cm) wide, /8" (1cm) above the rail when stowed. 1 /8" (4.8cm) 7 build is complete (fits both metric and SAE bottle caps!). SPECS: 6061 T6 aluminum, anodized black or tan. 5.4" (13.7cm) long. high deployed. Front Sight – 1½" (3.8cm) OAL, 1¼" (3.2cm) wide, /16" 11 SPECS: American-made steel, heat-treated for superior hardness, with 5.6 oz. (159g) wt. 500 Lumens. Tactical Runtime 1.5 hrs. 2 CR-123 bat- (1.1cm) above the rail when stowed. 1 /16" (4.3cm) high when deployed. a grip-enhancing manganese phosphate finish. 11.7" (29.7cm) OAL, .35" teries, included #100-012-617KW MBUS Pro Sight Set ��$ 159.99 (9mm) thick. #100-014-007KW Ultra Scout Light, Black �� $ 332.10 #100-012-616KW MBUS Pro Rear Sight �� 99.70 #100-015-279KW Armorer’s Wrench �� $ 75.95 #100-014-008KW Ultra Scout Light, Tan �� 332.10 #100-012-615KW MBUS Pro Front Sight �� 80.70

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 5 Brownells.com/dream11

LEUPOLD 1 3 MARK 4® LR/T SCOPE ab High-Resolution Optics & Repeatable Tracking For Superb Accuracy Variable-power, JP ENTERPRISES precison tactical ® 2 scope has a 30mm MAGPUL AR-15/AR-308 tube, Leupold’s JPSCS SILENT CAPTURED legendary high- AR-15/M16/AR-308 resolution optics, GENERATION II PRS® SPRING SYSTEM ab and repeatable tracking for PRECISION RIFLE STOCK ab Eliminates Annoying, Raspy Buffer & Spring Noises thrilling long-range accuracy. Side parallax adjustment gives fast, Adjustable Length Of Pull & Comb Height easy focusing from 50 yards to infinity. Large, easy-to-grasp Drop-in captured-spring recoil system helps your AR function target turrets with repeatable tracking allow an easy return to zero Fully adjustable stock and comb for AR-15/M16/AR-style more smoothly and quieter without any permanent modifications. once you’re sighted in. Features M1 Mil-Dot reticle, and windage/ .308 rifles readily adapt length of pull and comb height with two The carefully balanced, custom-ground buffer spring, combined elevation adjustments in 1/4 MOA increments. Aluminum tube, click-detent adjustment wheels. Drop-in installation on rifles with the JP LMOS buffer, greatly reduces friction and vibration - anodized, matte black finish. 30mm tube OD. with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber say goodbye to the annoying “spoon over a cheese grater” noise #526-000-155KW 4.5-14x50 Mark 4 LR/T Scope �� $ 1399.99 buttpad seats securely onto your shoulder and won’t slip during of conventional springs and buffers. Fits buffer tubes for both sustained shooting exercises. Fully-raised comb will not get in the M4-style collapsible stocks and also, using the included spacer, the way of charging handle operation. Removable base cover conceals longer tubes for fixed rifle stocks. Auxiliary Spring Rate Kit allows an accessory rail to provide a mounting platform for a monopod. you to fine tune the JP Silent Captured Spring System. Simply Removable sling loops can be mounted on either side of stock to replace the original JPSCS spring with a slightly different spring rate FLATLINE OPS accommodate your preferred carry position. from the kit to get the optimum performance from your rifle. Ideal 5 ACCU/LEVEL™ ab SPECS: Molded polymer, Black, Dark Earth, O.D. Green, or Stealth for rifles without an adjustable gas block. Extra spring packs sold Gray. L.O.P. adjusts from 13¼" (33.6cm) to 14½" (36.8cm). Comb height separately. Helps You Achieve can be raised 1" (2.5cm). 1 lb. 12 oz. (.79kg) wt. 5 SPECS: Stainless steel and hard polymer. 7" OAL. Nylon spacer – 1 /8" True Vertical Hold 30mm Sniper #100-002-457KW AR-15/M16 PRS Stock, Black �� $ 242.25 long. Instructions included. JPSCS-15 fits AR-15/M16/M4. JPSCS-10 fits For Improved Accuracy #100-003-139KW AR-15/M16 PRS Stock, Dark Earth �� 242.25 AR-style .308 rifles, including DPMS LR-308, ArmaLite® AR-10®. Does AR-15/M16 PRS Stock, O.D. Green �� not fit Rock River Arms LAR-8. JPSCS-PACK15 contains five spring #100-003-138KW 242.25 The ACCU/LEVEL scope level attaches 100-014-426KW AR-15/M16 PRS Stock, Stealth Gray �� 242.25 weights: 80, 85, 90, 95, 100. JPSCS-PACK10 contains three spring weights: 100, 105, 110. to the scope tube to help you correct #100-002-947KW AR-308 PRS Stock, Black �� 242.25 “cant error” for a dead-on true vertical hold JPSCS-15 Silent Spring System �� #100-010-594KW AR-308 PRS Stock, Dark Earth �� 242.25 #452-000-149KW $ 137.99 that improves accuracy, especially for long-range shots. On #100-010-595KW AR-308 PRS Stock, O.D. Green �� 242.25 #452-000-150KW JPSCS-10 Silent Spring System �� 137.99 Hunter, Sniper, and Covert models, the bright, fluorescent yellow 100-014-427KW AR-308 PRS Stock, Stealth Gray �� 242.25 #452-000-160KW JPSCS-PACK15 Auxiliary Spring Rate Kit �� 37.99 bubble-level pivots out into the open position for immediate #452-000-161KW JPSCS-PACK10 Auxiliary Spring Rate Kit �� 23.99 use and swings back over the top of the scope for storage.The Fixed ACCU/LEVEL is designed to be aligned with the gun during installation. The Patriot version has a built-in adjustment feature that allows it to be fine-tuned at any time after it is mounted. JP ENTERPRISES AR-15/M16 Each unit accommodates both right- and left-handed shooters 4 FLATTOP OPTIC MOUNT ab and is machined from advanced 6061 T6 aircraft aluminum for strength and hard anodized for protection from the elements. Integral Offset Rings For Rock-Solid Mounting Models available to fit 1", 30mm, 34mm, and 35mm scope tubes. Ring clamp holds tight with two stainless steel Allen head screws. One-piece, aluminum mount with integral rings is precision machined to true MIL-STD Integral accessory dovetail accepts the Strong Arm Mount (below) 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are for attaching a cosine indicator to your ACCU/LEVEL. ideal for use with long eye relief scopes. Mounts available for 1"/30mm, 34mm, and 35mm 9 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. /16" scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included (1.5cm) long x 2½" (6.3cm) wide (closed), 4" (10.2cm) wide (open). polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps #100-006-834KW 1” Hunter ACCU/LEVEL ��$ 129.95 to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement. #100-006-835KW 30mm Sniper ACCU/LEVEL �� 139.95 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 #100-006-836KW 34mm Covert ACCU/LEVEL �� 169.95 1 3 1 Torx wrenches. 1"/30mm - Approximately 5 /2" (14cm) long, 1 /4" (4.4cm) wide, 2 /8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" #100-011-952KW 1” Fixed ACCU/LEVEL �� 74.99 3 5 1 (24.5mm), measured from top of receiver rail to bottom of scope. 34mm & 35mm - 5 /4" (14.6cm) long, 11 /16" (4.9cm) wide, 2 /2" (6.3cm) overall #100-011-953KW 30mm Fixed ACCU/LEVEL �� 79.99 height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube. #100-011-954KW 34mm Fixed ACCU/LEVEL �� 84.99 #452-000-044KW 1”/30mm Flattop Optic Mount �� $ 164.99 #100-011-930KW 30mm Patriot ACCU/LEVEL �� 109.99 #452-000-124KW 34mm Flattop Optical Mount �� 184.99 #100-011-931KW 34mm Patriot ACCU/LEVEL �� 124.99 #452-000-125KW 35mm Flattop Optical Mount �� 224.95 #100-011-932KW 35mm Patriot ACCU/LEVEL �� 134.99

OFFICE / 6 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 3 4 5 2 6 7

12 8 AR-Style 308 Brownells.com/dream11 9 10 11

JP ENTERPRISES 6 7 AR-15/M16/AR-308 BENNIE COOLEY TACTICAL COMPENSATOR ab Efficient Reduction Of Felt Recoil Low-profile steel compensator redirects and harnesses JP ENTERPRISES combustion gas 8 energy to reduce felt recoil by as much as 70% compared to AR-15/AR-308 JP ENTERPRISES AR-15/M16 an uncompensated barrel. Helps the shooter stay on target for PSC-11/12 SIDE-CHARGING UPPER MODULAR HANDGUARD RAILS ab accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons RECEIVERS ab Put The Accessory Rail Exactly Where You Want It instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator FAL-Style Charging Handle For Easier Operation Bolt-on Picatinny rails fit any JP modular handguard, including muzzle brake in a slim, streamlined compensator that meets the new MK III series, so you can install just enough rail to mount the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, Machined-from-billet upper receiver takes the basic AR platform your optic, light, laser, vertical grip, bipod, or other accessory and other tactical rifle competitions. Large, flat interior baffle to a new level of performance by adding side charging capability EXACTLY where you need it. Whenever you need to change surfaces allow the bullet to pass through while redirecting the as found in the FN-FAL and H&K battle rifles. This allows the configuration, just move the rail or add another one. Why carry rapidly expanding gas to the sides and slightly forward through the shooter to cycle the action for rapid loading or perform immediate around a lot of extra Picatinny rail that adds weight and scrapes square-cut side vents to create forward thrust that counteracts action to clear a malfunction without breaking out of shooting up your hand? Mounting hardware included; bolts directly to any bullet recoil. The higher the pressure, the more counteracting position. The standard charging handle has also been retained JPHG handguard. Five lengths to choose from. Machined from force the comp actually provides. In addition, four tuned ports on for conventional operation to give the shooter the best of both 6061 T6 aluminum for strength and durability, hardcoat anodized, top minimize muzzle rise, further helping the shooter keep the worlds. Each PSC upper comes with bolt, bolt carrier, forward tactical matte black finish. sights on target. Solid bottom prevents kicking up a dust signature assist, ejection port cover, and charging handle. PSC-11 fits AR-15 15" Extra Long Rail �� #452-000-145KW $ 99.99 when shooting prone. lower receiver and is available with Standard JP bolt carrier or 1 #452-000-038KW 11 /2" Rifle Rail �� 90.99 SPECS: Carbon steel, matte black oxide finish, or stainless steel, Low-Mass bolt carrier. PSC-12 fits any AR-style .308 lower receiver #452-000-052KW 9" Mid-Length Rail �� 71.99 polished finish. .223/5.56mm - ½"-28 threads. .281" I.D. exit hole may that will accept a DPMS LR-308 pattern upper receiver. (Will #452-000-035KW 2" Tactical Rail �� 32.99 be enlarged to fit other calibers. 25/16" (5.9cm) long, .989" (2.5cm) O.D. not fit ArmaLite® AR-10® pattern uppers.) Comes with JP’s .308 #452-000-036KW 4" Tactical Rail �� 46.99 Models to fit .750" (19mm) and .875" (22mm) O.D. barrels. .308/7.62 - EnhancedBolt group. a .750" O.D., .350" exit hole, and 5/8"-24 tpi threads. SPECS: Receiver - 7075 aluminum, hard-coated surfaces with black #452-000-055KW .223/5.56 .750" Comp, Black �� $ 85.99 Teflon® finish. Bolt – 9310 steel. Carrier – 416 stainless steel with QPQ #452-000-056KW .223/5.56 .750" Comp, Stainless �� 85.99 black hard coat finish. Includes upper receiver, bolt carrier group, side DPMS AR-STYLE .308 #452-000-057KW .223/5.56 .875" Comp, Black �� 85.99 charging handle & standard charging handle. 9 PANTHER STEEL MAGAZINES #452-000-058KW .223/5.56 .875" Comp, Stainless �� 85.99 #452-000-134KW PSC-11 Side-Charge Upper, Std Carrier �� $ 854.99 452-000-089KW .308/7.62 Comp, Blk �� 85.99 #452-000-135KW PSC-11 Side-Charge Upper, Low-Mass Carrier 854.99 Durable & Dependable Magazines 452-000-090KW .308/7.62 Comp, SS �� 85.99 452-000-171KW PSC-12 Side-Charge .308 Upper �� 1,199.00 For Your .30 Caliber AR All-steel straight body magazine is built to handle the punishment of tactical operations and service rifle competition. Feeds reliably and consistently in AR-style .308 rifles from Bushmaster, DPMS, Knights Armament Corp., JP ENTERPRISES AR-15/AR-308 Remington, and others listed below. Mag 10 JPFC-1 ADJUSTABLE TRIGGER SYSTEM ab body is constructed of precision-formed, spot-welded 1050 sheet steel with a durable Smooth, Even Trigger Pull, Precise Letoff; Easy Installation manganese phosphate finish to function properly and stand up to harsh conditions. Easy-to-fit replacement for factory trigger is fully adjustable for engagement Steel floorplate removes for cleaning; steel spring and plastic and overtravel. Redesigned sear geometry and advanced metallurgy result in a follower give you reliable, smooth feeding of every round. precision-ground sear edge that delivers a precise, consistent letoff and prevents SPECS: 1050 steel, manganese-phosphate finish, black. Fits DPMS the kind of wear that causes doubling and other problems. Extremely short reset Panther LR series rifles (including .243, .260), Bushmaster ORC, Colt enables fast follow-up shots. Installs in minutes with no permanent alterations LE901, Fulton Armory, Knight SR-25, Patriot Ordnance Factory, Rem- to the rifle and lets you keep your current hammer and pins. Disconnector spring, engagement screw, and overtravel screw are already ington R-25, Ruger SR-762, Smith & Wesson M&P10, and Stoner SR-25. installed; also includes disconnector, trigger return spring, hammer spring, and .050" hex key. Comes with a standard weight hammer Does not fit ArmaLite® AR-10® or Rock River Arms. spring, for a trigger pull of between 3 and 3.5 lbs.—plus a “tactical” spring that gives a 3.5 to 4 lb. pull and an extra level of ignition reliability. #231-000-207KW 19-Rd Panther LR Mag �� $ 28.99 SPECS: Steel, Parkerized finish. Fits rifles with .154" (military and current aftermarket) diameter trigger pins. Measure your pins before ordering. #231-000-302KW 10-Rd Panther LR Mag �� 29.99 Includes complete instructions and a CD-ROM video showing step-by-step installation. #231-000-301KW 4-Rd Panther LR Mag �� 29.99 #452-015-000KW JPFC-1 Adj. Trigger Kit, .154" Pins �� $ 113.99

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 7 Brownells.com/dream11 Optics & Precision Gear

JP ENTERPRISES AR-15 12 JPFC-SA ADJUSTABLE/REVERSIBLE SAFETY SELECTOR ab Eliminates “Fitting” The Safety; Works With Factory & 13 Aftermarket Triggers

Easy-to-install, reversible JP ENTERPRISES safety selector ensures ultra- reliable engagement and AR-15/M16/AR-308 eliminates the time-consuming BUTTPLATE ADAPTER FOR MAGPUL PRS job of “fitting the safety” STOCK ab 11 to a factory or aftermarket trigger—the perfect upgrade Height & Cant Adjustable For A Perfect Fit to accompany a JP Adjustable The JP buttplate adapter makes the Magpul PRS stock even MAGPUL AR-15/M16/AR-308 Trigger. An adjustment screw on the selector drum lets you quickly ® more versatile by enabling the shooter to adjust the buttplate up MIAD GEN 1.1 GRIP KIT ab and easily set the correct trigger/safety relationship. Deeply grooved to 2½" upward and 2" downward with up to 10 degrees of cant to control pad gives positive thumb engagement even when wearing the right or left. Easy-to-install adapter bolts onto the stock and Interchangeable Inserts Let You Configure To Fit Your Hand gloves, and can be installed in the standard position on the left- accepts the original PRS pad. No gunsmithing required. MIssion ADaptable (MIAD) modular grip system with side of the receiver or on the right side for left-handed shooters. SPECS: Aluminum, matte black anodized finish. Includes butt pad interchangeable inserts lets you find the grip configuration that fits Includes a low-profile ambidextrous lever for the other side that adapter, adjustment plate, and mounting screws. Adapter adds .725" to your hand size and mission requirements. All models come with gives you the flexibility to operate the safety with the off hand. length of pull. Fits Magpul PRS stock only. main grip body and detachable rubber core that holds a ½ oz. #452-000-043KW JPFC-SA Adj./Rev. Selector ��$ 66.99 lubrication bottle in the cap. Additional cores for storing batteries #452-000-154KW PRS Buttplate Adapter �� $ 94.99 and other items are available separately. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge frontstrap insert. Reinforced molded polymer construction. #100-014-095KW AR-15/M16 MIAD GEN 1.1 Kit, Black �� $ 34.15 VORTEX #100-014-096KW AR-15/M16 MIAD GEN 1.1 Kit, Dark Earth �� 34.15 VIPER® PST RIFLESCOPES 100-014-428KW AR-15/M16 MIAD GEN 1.1 Kit, Stealth Gray �� 34.15 #100-014-098KW AR-308 MIAD GEN 1.1 Kit, Black �� 34.15 Dependable, Precise Accuracy Reticle & #100-014-099KW AR-308 MIAD GEN 1.1 Kit, Dark Earth �� 34.15 Magnification Options To Fit Your Needs AR-308 MIAD GEN 1.1 Kit, Stealth Gray �� 1-4x24 6-24x50 2.5-10x44 100-014-431KW 34.15 Variable-power “Precision Shooting Tactical” scopes are built to deliver consistent accuracy at extreme ranges in harsh environments and stressful situations. Waterproof, dustproof, shockproof, argon-gas-purged scopes feature fully coated glass, with exterior lens surfaces protected with scratch-resistant ArmorTek™ coating. Turret stops prevent turrets from traveling more than one revolution below the sight-in zero. Illuminated reticles are glass etched, not wired. Ten illumination intensity levels, with an “off” position between each setting, powered by a single CR-2032 lithium battery (included). EBR (Enhanced Battle Rifle) reticles feature subtension lines for ranging, holdover, and windage corrections. MOA (Minute of Angle), with subtension lines that equal approximately 1" at 100 yards, and MRAD (milliradian), with subtension lines that equal approximately 3.6" at 100 yards; TMCQ (Tactical Milling Close Quarters) hybrid reticle is designed for rapid, close- and mid-range shooting, with MOA or MRAD subtension lines. FFP (First Focal Plane) models have MOA reticle lines that remain valid at all magnifications, eliminating the need to recalculate holdover data. SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. 30mm O.D. tube, all models. Windage/elevation adjustment: ½ MOA on 1-4x24 models, ¼ MOA on all others. #100-005-956KW 1-4x24 Viper Scope, TMCQ/MOA ��$ 499.99 #100-005-951KW 4-16x50 FFP Viper Scope, EBR/MOA ��$ 899.99 JP ENTERPRISES 100-009-561KW 1-4x24 Viper Scope w/Turret Caps, TMCQ/ #100-007-284KW 4-16x50 Viper Scope, EBR/MRAD �� 699.99 MOA �� 479.99 100-007-282KW 4-16x50 FFP Viper Scope, EBR/MRAD �� 899.99 AR-15/M16/AR-308 #100-005-955KW 1-4x24 Viper Scope, TMCQ/MRAD �� 499.99 #100-005-952KW 6-24x50 Viper Scope, EBR/MOA �� 749.99 MK III SIGNATURE SERIES MODULAR #100-005-954KW 2.5-10x44 Viper Scope, EBR/MOA �� 599.99 #100-005-950KW 6-24x50 FFP Viper Scope, EBR/MOA �� 949.99 #100-007-285KW 2.5-10x44 Viper Scope, EBR/MRAD �� 599.99 #100-014-308KW 6-24x50mm FFP Viper Scope, EBR-2C/MOA �� 949.99 ab HANDGUARDS #100-013-110KW 2.5-10x32mm FFP Viper Scope, MRAD �� 799.99 #100-007-283KW 6-24x50 Viper Scope, EBR/MRAD �� 749.99 Latest-Generation Modular 'Guard Gives Superb #100-013-111KW 2.5-10x32mm FFP Viper Scope, MOA �� 799.99 #100-007-281KW 6-24x50 FFP Viper Scope, EBR/MRAD �� 949.99 4-16x50 Viper Scope, EBR/MOA �� Versatility, Minimal Weight & Sleek Appearance #100-005-953KW 699.99 #100-014-307KW 6-24x50mm FFP Viper Scope, EBR-2C/MRAD 949.99 The MK III series is the latest development in the on-going evolution of JP’s modular free-float handguard system, with outstanding versatility and a clean, streamlined appearance. MK III tubes accept all standard JPTR bolt-on rails and accessories, sold separately, so you can install rails only where you need them, for great savings in weight and bulk. Ergonomically optimal 2" tube diameter is comfortable for most hands while still providing enough internal clearance for most low-profile gas blocks. HEAVY VARMINT SHOOTING REST Redesigned steel barrel nut enables easy, fast barrel installation and replacement. You can remove the current handguard any time and A Super-Steady, Rock Solid Platform For Long-Range swap on any other JP handguard. Exterior surface is rock-blasted Rifle Shooting to provide a highly effective non-slip grip. All MK III handguards come with two JPHGS bolt-on quick-detach sling swivel studs. Sinclair’s heavy-duty rest is the product of input from many, many AR- 308 models have unique “eccentric” barrel nut that enables the Heavy Varmint Heavy Varmint experienced benchrest shooters. It delivers solid support with a heavy- Bench Rest All-Purpose Rest narrow 2" OD tube to cover the 308’s larger barrel nut to give your duty stainless steel center column and 1" stainless post, oversized 308 an unusually slim, streamlined handguard. scalloped hand wheel with thrust bearing for ultra-smooth vertical SPECS: 6061 T6 aluminum tube, 4140 steel barrel nut, matte black adjustments, large ½"-20 thread rest feet with oversized aluminum finish. Available in 12½" and 15½" OAL. 2" O.D. 1.75" internal clearance. anodized knobs (no plastic parts here), and a fully adjustable forend stop for shot-after-shot repeatability. The base itself is of ductile cast AR-308 models fit DPMS LR-308, Knights Armament SR-25, Bushmaster iron construction with a durable powder coat finish to last for a lifetime of use – exactly what you’ve come to expect from all Sinclair .308 rifles, and other .308 rifles with: 17/16"-18 tpi receiver thread pat- manufactured products. Weighing up to 17 lbs. with a sand bag, these rests will stay put on your bench! Heavy Varmint Bench Rest accepts tern and max. 1.170" barrel O.D. Protektor or Edgewood front sand bag of your choice (not included, available separately at Brownells.com). Top side plates let you “pinch” #452-000-186KW JPHG3-1M AR-15 MK III Handguard, 12½" ��$ 219.99 the bag for subtle bag width adjustments. Heavy Varmint All-Purpose Rest has Sinclair’s versatile All-Purpose (A/P) Top that quick-adjusts #452-000-187KW JPHG3-6M AR-15 MK III Handguard, 15½" �� 229.99 to accommodate nearly any forend. Switch from narrow sporter stocks to 3½" BR stocks with a turn of a lever. Includes a dual-sided #452-000-184KW JPHG3-1D AR-308 MK III Handguard, 12½" �� 219.99 leather/cordura sand bag (not filled). #452-000-185KW JPHG3-1D AR-308 MK III Handguard, 15½" �� 229.99 #749-013-860KW Heavy Varmint Bench Rest �� $ 309.99 #749-013-850KW Heavy Varmint All-Purpose Rest �� $ 299.99

OFFICE / 8 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 HARRIS AERO PRECISION ULTRALIGHT SCOPE MOUNT ab BIPODS ab Rock Solid Mount That Weighs Only 3 Oz. Closest Thing To A Traveling Benchrest Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t Ultra-lightweight one-piece change zero; added weight steadies gun. Spring-loaded, telescoping legs have fixed notch and sliding scope mount securely clamps to adjustments for leg height; fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do any Picatinny receiver rail with a not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs rock solid fit. A side locking bar, ® and adjustable tension on hinged base help eliminate tremor. All Adapters fit either Series bipods. Not three Torx head bolts, and three recommended for lever actions. cross bars that fit into the rail slots SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting sur- ensure this mount won’t budge. face to center of bore. Model BR: For benchrest use. BRM has equally spaced height adjusting notches. Model Integral, vertically split rings have a a grooved locking system and ® H: For prone/sitting. Model L: For bench or prone. Model LM: Notch only height adjustments. Model 25: Three two Torx screws each to firmly hold the scope firm against recoil- Section legs. Model 25C: Extra tall three section legs. #9 Adapter requires swivel stud mounted to stock. induced slippage. Torx wrenches included. Models for 1" or 30mm scope tubes. STOCK # STYLE HEIGHT MODEL PRICE STOCK # STYLE HEIGHT MODEL PRICE SPECS: 6061 T6 aluminum, hardcoat anodized, matte black, flat dark 3 #416-005-001KW 1A2 6" to 9" BR $ 73.99 #416-002-223KW S 9" to 13" LM $ 103.99 earth (FDE), or O.D. green (ODG). 4¾" long x 1 /16" wide x 2½" high. 3.1 #416-005-000KW S 6" to 9" BR $ 103.99 #416-025-226KW S 11" to 25" 25 $ 119.99 oz. wt. #416-005-101KW 1A2 6" to 9" BRM $ 73.99 #416-025-227KW 1A2 13" to 27" 25C $ 89.99 #953-000-002KW 1" Ultralight Scope Mount �� $ 79.99 #416-005-100KW S 6" to 9" BRM $ 109.99 #416-025-228KW S 13" to 27" 25C $ 119.99 #953-000-003KW 30mm Ultralight Scope Mount, Black �� 79.99 #416-001-121KW 1A2 9" to 13" L $ 73.99 416-003-015KW #5 Adapter fits AR-15 round handguard, #953-000-011KW 30mm Ultralight Scope Mount, FDE �� 84.99 #416-001-221KW S 9" to 13" L $ 103.99 includes sling swivel �� $ 13.29 #953-000-012KW 30mm Ultralight Scope Mount, ODG �� 94.99 #416-002-123KW 1A2 9" to 13" LM $ 73.99 416-006-100KW #6 Stud fits accessory rails approx. 3/8" across slot 10.49 ULTRALIGHT EXTENDED & SPR SCOPE MOUNTS Rigid minimal bulk mount has the Extended rear ring pushed farther forward for use with optics that require extra eye MAGNETOSPEED relief. Extended has the rear 1" farther forward, while the SPR positions the V3 CHRONOGRAPH rear of the optic an extra 2" forward, Innovative Lightweight System Mounts making it ideal for use with the high- SPR Directly To Barrel end optics often used on “Special Project Rifles”. Excellent mounts for Barrel-mounted chronograph uses advanced electromagnetic sensors, instead of optics with short body tubes. traditional optical sensors, to measure bullet velocity. Designed for barrels and suppressors #953-000-007KW 1" Extended Scope Mount, Black �� $ 89.99 ½" to 2" in diameter, this bayonet style chronograph easily mounts on rifles, pistols, shotguns, #953-000-008KW 30mm Extended Scope Mount, Black �� 89.99 and even air rifles. User friendly, three button digital display unit calculates and saves ballistic #953-000-009KW 30mm Extended Scope Mount, FDE �� 99.99 data for up to 99 consecutive shots. Unit also includes a rapid-fire mode, capable of #953-000-010KW 30mm Extended Scope Mount, ODG �� 99.99 calculating rate of fire. Data can be easily transferred from the display unit, in spread sheet #953-000-013KW 30mm SPR Scope Mount, Black �� 94.99 format, to your computer using a micro-SD card. Uses one 9 volt or two CR123 batteries. #953-000-014KW 30mm SPR Scope Mount, FDE �� 104.99 SPECS: Kit includes display unit, sensor unit, connection cables, mounting hardware, micro-SD #953-000-015KW 30mm SPR Scope Mount, ODG �� 104.99 card w/adapter, and complete instructions. Fits 1/2" (1.3cm) to 2" (5.1cm) diameter barrels. #100-014-631KW Magnetospeed V3 Chronograph �� $ 379.99

Segmented HOWARD LEIGHT Circle IMPACT SPORT ELECTRONIC EAR MUFFS Protects Hearing, Amplifies Conversation & Range Commands Compact, lightweight electronic muffs let you hear conversation and range commands, while blocking out dangerous noises like gunfire to protect your hearing. Ultra-fast response electronics amplify ambient sounds to a safe 82 decibels (dB), yet shut down when sounds above 82 dB are detected to let the muff’s passive hearing protection take over. In amplification mode, directionally placed stereo microphones Horseshoe Dot even help you hear where the sound is coming from. Built-in AUX input accepts 1/8" (3mm) stereo plug to connect a radio or other audio device. Automatic shut-off after 4 hours to preserve battery life. Low-profile TRIJICON ear cups with bottom half that angles in sharply for plenty of clearance when shouldering long guns. ab SPECS: Molded polymer, O.D. Green. NRR 22 dB. 10.4 oz. (295g) wt. Uses two AAA batteries, included; 350 hours VCOG continuous operation. Versatile FFP Scope At Home With CQB Or #100-004-644KW Impact Sport Electronic Muffs �� $ 53.99 Long-Range Targeting

Trijicon’s 1-6x24mm Variable Combat Optical Gunsight is an ultra-reliable, military-grade optic with a magnification AMERICAN DEFENSE range that readily accommodates both CQB and long-distance ACCU-SHOT marksmanship. The VCOG is a mil-spec grade optic, robust AR-15/M16 ATLAS BIPOD ab enough for any application. Its adjustable-brightness LED- AD-RECON SCOPE MOUNT ab Illuminated Front Focal Plane (FFP) ranging reticle is ballistically Lightweight Bipod calibrated to specific cartridges and maintains true subtensions at Rock-Solid Platform For Big Gives Wide Range Of any magnification - features preferred by many tactical shooters. Two reticle styles available, calibrated for 5.56 (.223) ammo with Scopes With The Freedom Of A Adjustment 55 or 77 grain bullets or 7.62 (.308) with 175 grain bullets. 5.56/.223 Quick-Release Tactical Mount Aluminum bipod calibrated for holdovers out to 800m; 7.62/.308 calibrated out One-piece cantilevered mount gives ultra-secure mounting of features stainless steel to 1,000m. .300 AAC Blackout model is calibrated to 600m with high-power optics to flattop rails, while preserving the versatility locking components and any weight bullet. Rugged aluminum housing with rubber exterior of a quick-detach mount. Dual release lever system grabs the rail independently-adjustable armor protects the optics and electronics inside. The VCOG in two places and has locks that prevent levers from being thrown legs that allow up to 180° front-to-back movement, 30° left-to- doesn't separate scope rings or base because it has an integral open unintentionally. Easily adjusts for tension without any special right pans and 30° of cant. Makes it easy to align your crosshairs TA51 scope mount that clamps instantly to any Picatinny rail. Runs tools, so the AD-Recon will fit out-of-spec rails just as well as and track a target, regardless of position or terrain. Legs extend on one readily available AA battery. rails cut to the true MIL-STD 1913 Picatinny spec. Levers can be from 5" to 9". Grippy rubber feet keep the bipod secure on most SPECS: Aluminum housing, black rubber armor. All models are configured to flip to the front or rear. Cantilever gives plenty of surfaces. Available with three attachment options: BT10-LW17 has 1-6x24mm. 10" (25.5cm) long, 2.5" (6.4cm) wide, 2.7" (6.9cm) high. 23.2 room to achieve both proper eye relief and height above receiver a Picatinny quick-detach lever mount. BT10 comes with a 2-screw oz. (657g) wt. 1/2 MOA windage/elevation click adjustments. with conventional scopes. Picatinny mount and BT10-NC is a “no-clamp” model that uses #892-000-140KW 5.56/55 gr VCOG, Seg Circle ��$ 2,380.00 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6" adapters, sold separately (see Brownells.com), to fit any 17s lever- #892-000-142KW 5.56/55 gr VCOG, Horseshot Dot �� 2,380.00 (15.2cm) long, 17⁄8" (4.8cm) wide, 2½" (63.5cm) high. 2½" space be- style mount or the AICS spigot mount. #892-000-141KW 5.56/77 gr VCOG, Seg Circle �� 2,380.00 tween rings. Centerline of rings is 1½" (3.81cm) above the rail. Models SPECS:Aluminum, matte black finish. #892-000-143KW 5.56/77 gr VCOG, Horseshoe Dot �� 2,380.00 for 1" and 30mm O.D. scope tubes. #100-012-043KW BT10 Picatinny Mount Bipod ��$ 219.95 #892-000-144KW 7.62/175 gr VCOG, Seg Circle �� 2,380.00 #100-005-757KW 1" AD-RECON Mnt �� $ 179.95 #100-012-045KW BT10-LW17 QD Picatinny Mount Bipod �� 279.95 #892-000-145KW 7.62/175 gr VCOG, Horseshoe Dot �� 2,380.00 #100-005-758KW 30mm AD-RECON Mount �� 179.95 #100-012-044KW BT10-NC Bipod �� 219.95 #892-000-146KW .300 BLKOUT VCOG, Seg Circle �� 2,380.00

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 9 Brownells.com/dream12

Aimpoint 3 Micro Series Red Dot Sights Rugged, Compact, Easy-To-See Red Aiming Dot; 5-Year Battery Life These ultra-compact red dot sights add minimal bulk to your gun while providing an easy-to-see, bright red LED aiming dot for hunting and tactical applications. Comes with an integral Weaver-style mount that attaches easily. Fully adjustable for windage and elevation; adjustment tool is an integral part of the adjustment knob caps so you never loose it. 1x magnification. Available with 2 or 4 MOA dot (see below). Micro H-1, 4 MOA ACE LTD. AK-47/74 1/2" adjustment 100 yds (13mm 100m). 50,000 hrs (5+ years) continuous use on one CR-2032 lithium battery. 1 ab Micro H-1 is designed for hunting/sporting applications and is submersible to 15 feet. Can be mounted on shotguns, rifles, handguns, AKFX MODULAR STOCK and bows, and includes 12 daylight settings and one extra-bright setting. Light, Strong Skeletonized Fixed Stock Micro T-1 is designed for tactical use; includes band pass lens coating with 6 night vision/7 daylight settings, so it’s fully compatible with all generations of Night Vision Devices, and submersible to 80 feet. Features integral Picatinny base. Bolt-on components let you install a lightweight fixed Micro H-1 with AR-15 Mount comes with a quick-release riser mount ready for installation on any AR-15 flattop rifle. Provides correct skeletonized stock on your stamped-receiver Kalashnikov. The height for co-witness with military “iron” sights. AKFX stock is exceptionally strong and light, with front cap, #100-003-004KW Micro H-1, 4 MOA �� $ 617.00 #100-009-905KW Micro T-1, 2 MOA �� $ 691.00 buttplate, and bottom tube of machined aluminum and the top bar #100-009-907KW Micro H-1, 2 MOA �� 617.00 #100-006-838KW Micro H-1 w/LRP Mnt �� 695.00 ® and center brace turned from the super-strong Delrin polymer. #100-003-003KW Micro T-1, 4 MOA �� 691.00 Comes with a removable rubber recoil pad. Stock comes wtih the AKRBC receiver block that fits flush with the back of most stamped 1mm and 1.6mm receivers. Installation requires the tang on the back of the receiver to be cut off and filed smooth. The block then simply bolts into the receiver, held securely in place by the pistol grip “T” nut. Drilled and tapped in two places to allow the stock to SUREFIRE be mounted in standard position or higher for use with optics. 4 P2x fury HANDHELD LIGHT SPECS: AKFX Stock – Machined aluminum and Delrin, matte black. 8½" OAL. Rubber recoil pad included. Receiver Blocks & Folding Small Size, Lightweight, Tremendous Illuminating Power Mechanisms – Machined aluminum, hardcoat anodized, matte black. Compact and durable, high-output lithium-powered handheld light illuminates darkened rooms, entryways, Receiver blocks fit stamped sheet metal receivers. hallways - anyplace you need bright, white light instantly. Lamp modules use a pre-focused, metallic vapor coated #100-008-032KW ARFX Stock & AKRBC Receiver Block �� $ 129.99 reflector to prevent dark spots or unevenness in the beam. Sealed tailcap switch offers two modes of operation: push for momentary activation or twist for constant-on. Switch lockout prevents accidental activation during storage or transport. Rugged, dual-output LED light offers an incredible 500-lumen high-output mode for up to 1.5 hours runtime. 15-lumen low mode gives up to 46 hours of operation. SPECS: Aluminum body, hard-anodized, black. 5.4" (13.7cm) long. 5.7 oz (161g) wt. 500 lumen high output, 15 lumen low output. Runs on two CR-123A batteries, included. MIDWEST INDUSTRIES #152-000-112KW P2X Fury Flashlight ��$ 139.50 2 AK-47/74 OPTIC-READY HANDGUARD LANTAC AK-47 Gives Flexibility Of A 5 DRAKON MUZZLE BRAKE Railed AR Handguard HK-STYLE SLING SNAP HOOK Plus An Aimpoint Micro Enhances Muzzle Control & T-1 Mount On Top Reduces Felt Recoil Rugged, Clip-On Sling Attachment For Long Guns Machined aluminum The LANTAC Drakon Muzzle AK-47 three-rail handguard Brake has vertical ports in the Heavy-duty steel sling clip enables comes with MI’s “U.S. Palm” primary discharge chamber to quick attachment and removal of a top designed for direct attachment of an Aimpoint T-1 Micro red counteract muzzle rise, while the Short Energy Pulse system tactical sling. Fits any long gun with dot optical sight. Positions the Micro so the iron sights continue to decreases recoil length, preventing “stacking” of repeating shot eyelet or ring-type sling attachment be visible through the lower third of the optic. Lower section has energy and enabling fast, accurate follow-up shots. Even with fully point that accepts an HK-style snap three, T-marked MIL-STD 1913 Picatinny accessory rails. Installs in automatic fire, the Dragon delivers significant reduced recoil and hook. Overbuilt with reinforced stress points for worry-free carry, minutes. Counts as one U.S.-made component for United States muzzle climb, so more shots land on target. Machined from ultra- even in extreme operational conditions. Pronounced grooves Code, Title 18, Section 922(r) parts-count requirement. hard steel, the Drakon is virtually impervious to heat, corrosion on the snap jaw ensure a non-slip finger contact. Strong internal SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte and wear. Flats on the side allow you to install it with any standard spring keeps the jaw securely closed. Ideal for use with Brownells 1 black. 6" (15.2cm) long, 2 /8" (5.4cm) wide. 10 oz. (283g) wt. Includes wrench. Includes crush washer for secure fit and proper indexing. Low-Profile Ambidextrous or A2 Single-Point Sling Adapters, mounting hardware, Allen wrenches, thread locking compound, and SPECS: Carbon steel, nitride finish, black. Approx. 2.7" (6.9cm) long, available separately. Models available for 1" or 11/4" slings. instructions. Installation requires field stripping. Fits most AK47/74 vari- .866" (22mm) O.D. Fits rifles with 7.62mm bore and 14-1 LH muzzle SPECS: Heat-treated carbon steel, black oxide finish. ants with stamped or milled receivers. threads. #080-000-798KW 1" HK-Style Sling Snap Hook �� $ 4.99 #100-006-317KW AK-47/74 Handguard w/T-1 Mount �� $ 134.99 #100-015-463KW AK-47 Drakon Muzzle Brake �� $ 144.00 #080-000-797KW 11/4" HK-Style Sling Snap Hook �� 6.99

OFFICE / 10 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 2 3 4 1 (Top Half) 5

7 6 8 (Bottom Half) 11 9 AK-47 10 Brownells.com/dream12

IMPACT WEAPONS COMPONENTS 1" Thorntail MAGPUL AK-47 Light Mount 6 ADAPTIVE LIGHT MOUNTS 8 MOE® AK/AKM PMAG® ab Lightweight & Versatile Light Mounts Allow For Seamless Weapon Manipulation PMAG Dependability For Your Flashlight mount with a forward, offset configuration enables easy operation of lights with tailcap control switches Kalashnikov and obstruction-free weapon manipulation. Attaches to either side of a Picatinny accessory rail to provide you with many light positioning options while making the best use of limited rail space. Keeps light close to the weapon to aid Tough polymer 30-round magazine stealthy movement with less risk of snagging on obstructions as you move. functions perfectly in your AK-47/AKM or SPECS: 6061-T6 billet aluminum, matte black. Less than 1.75 oz. (49.6g) wt. Dropwing – fits SureFire M600/M300 series Scout Lights. Thorntail – clone chambered in 7.62x39. Magazines fits SureFire M300A Mini Scout and M600C Scout Lights. 1" (2.5cm) Thorntail – fits SureFire 6 series, 9 series and G2X Lights; Eagletac T100C2 MK II, feature impact and crush-resistant polymer Elzetta ZFL-M60, Fenix TK10/TK11 and Streamlight Scorpion TL-2 and Polytac Series. 1.03“(2.6cm) Thorntail – fits SureFire G2, G2 LED, G3 LED and construction, constant-curve shape for G3 Nitrolon Lights. .830" (2.1cm) Thorntail – fits SureFire E-Series, VTAC-L4-BK and VTAC-MINI-L4 Lights. Instructions included. smooth feeding, and anti-tilt, self-lubicrating #100-008-941KW Dropwing Light Mount �� $ 50.00 follower for enhanced reliability. Ribbed #100-009-713KW Thorntail Light Mount �� 50.00 gripping surfaces and front and rear texture #100-009-710KW 1" Thorntail Light Mount �� 70.00 aid magazine handling, and flared flooplate #100-009-711KW 1.03" Thorntail Light Mount �� 70.00 helps with dissasembly and assembly for #100-009-712KW .830" Thorntail Light Mount �� 70.00 cleaning and maintenance. SPECS: Polymer, black. 30-rd capacity. #100-014-188KW AK-47/AKM PMAG, Each �� $ 13.25 MIDWEST INDUSTRIES AK-47/74 #100-015-749KW AK-47/AKM PMAG, 10-Pak �� 124.99 7 UNIVERSAL HANDGUARD ab Brings The Versatility Of AR-Style Rail Mounts To Your Kalashnikov Railed handguard gives you the convenience and versatility of rail mounting lights, lasers, optics, vertical grips, and other accessories to your AK, just like an AR-15/M16. Installs in minutes with no gunsmithing or permanent modifications required. T-marked MIL-STD 1913 Picatinny rails bring your AK up to speed by accepting a wide range of accessories used on the AR-15/M16 platform. Extended model features a generous 9½" of bottom rail. Made in the U.S.A., so it counts as one U.S.-made component for United States Code, Title 18, Section 922(r) parts-count requirements. Optic-ready ML2 model has a top cover that enables mounting of most full-size red dot sights with 30mm tube, including: Aimpoint CompML2, Burris Speed Dot, Trijicon Tri-Power., Vortex StrikeFire, and Primary Arms M3. Allows co-witness with iron sights (lower one-third). 1 SPECS: 6061 T6 aluminum, hardcoat anodized, Black, Flat Dark Earth, or O.D. Green. 6" (15.2cm) long, 2 ⁄8" (5.3cm) wide. 10 oz. (280g) weight. Ex- tended - 9½" (24.1cm) long, 12½ oz. (354g) wt., available in black only. Both models come with mounting hardware, Allen wrenches, thread locking compound, and instructions. Installation requires field stripping. Fits most AK-47/74 variants with stamped or milled receivers. #100-004-668KW AK-47/74 Handguard, Black ��$ 119.99 #100-004-669KW AK-47/74 Handguard, Flat Dark Earth �� 119.99 TAPCO WEAPONS #100-009-454KW Extended AK-47/74 Handguard, Black �� 144.99 9 ACCESSORIES AK-47 TRIGGER GROUP ab U.S. PALM AK-47 Quality U.S.-Made Parts For Improved Reliability & 10 ECHO NINE THREE Cleaner Trigger Pull BATTLE GRIP ab 11 AK-47/74 For A Secure, Comfortable Grasp & Drop-in replacement for factory trigger provides smooth, crisp AMBIdextrous SLING ATTACHMENT ab 3 to 4lb. trigger pull and eliminates painful “trigger slap” common Better Control to AK-47s. Innovative trigger sleeve lets you assemble the trigger Textured, polymer pistol grip gives Easy Single-Point Sling group outside the gun, then install it as a unit. Fits factory trigger the shooter a more secure, comfortable Attachment For Your and hammer pin holes, so there’s no need to modify your rifle. grasp than the narrow, wood factory grip. Kalashnikov Investment cast from 4140 tool steel, then precision machined to Positions the operator’s hand close to the final dimensions for perfect fit and functional reliability. Heat- receiver and grip junction for great control. Simple, rugged stamped- treated to Rc 45-48, with a military-type black oxide finish for Aggressive “crackle” texture ensures a steel sling loop quickly superb wear resistance. Made in the U.S.A. to keep your gun in positive purchase. Water-resistant storage installs under AK pistol grip to increase your rifle's sling options. compliance with U.S. Code Title 18 Section 922(r) part-source compartment seals with a rubber trapdoor Gives ambidextrous sling attachment for most stamped receivers. requirements. Kit counts as three, U.S.-made parts—trigger, to hold spare batteries, ear plugs, or a couple of rounds of ammo. Fits fixed and folding stocks, including underfolders. Extends to disconnector, and hammer. Single and double hook models 3 SPECS: Molded polymer, black. 4¼" (10.8cm) tall, 2 /8" (6cm) wide at rear, parallel with stock, over firing hand. Rounded contours resist available. base, 1¼" (3.2cm) thick. Fits AK-47, AK-74, AKM, PKM, RPK, Yugoslav/ snagging on clothing or gear. SPECS: 4140 steel, black oxide finish. Hardened to Rc 45-48. Kit Serbian M64/M70/M72/M21, Iraqi Tabuk, and other modern AK variants SPECS: Stamped steel, Parkerized, matte black. 4.1" (10.4cm) long. 1.1" includes trigger, disconnector, trigger sleeve, and hammer. that use the AK-47 pattern pistol grip. Includes bolt and washer. (2.7cm) wide. 2.2 oz (62g) wt. #100-002-493KW Single-Hook Trigger Group �� $ 29.99 #100-005-981KW AK Battle Grip, Black �� $ 25.99 #100-008-778KW AK Ambidextrous Sling Loop �� $ 23.95 #100-002-494KW Double-Hook Trigger Group �� 29.99

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 11 Brownells.com/dream12 AK Parts & Accessories

MAGPUL RSA® RAIL SLING ATTACHMENT ab MINELLI AK-47 Clamp-On Loop Lets You MILITARY WALNUT STOCK Attach Your Sling Where Attractive, High-Grade Wood Furniture You Need It Dresses Up Your Kalashnikov Low-profile sling loop clamps With more than 70 years of woodworking experience, Minelli faithfully to any MIL-STD 1913 Picatinny reproduces stocks for classic military rifles using quality walnut. Careful or STANAG 4694 handguard inletting and attention to detail means these Italian-made stocks look historically rail to provide a secure forward accurate and fit your AK like a glove. These stocks are finished with oil, creating a attachment point for the Magpul smooth, traditional military-style appearance. Includes buttstock, upper and lower MS2 or similar clip-on sling. Can be installed on left or right side handguards, and pistol grip. Comes ready for installation; may require minor fitting. of top rail, or side or bottom rails for multiple alternate sling SPECS: American walnut, straight grain, minor figuring, oil finish. Fits AK-47/AKM pattern rifles with stamped receiver only. configurations. Loop is angled to resist snagging on other gear. #100-010-735KW AK-47 Walnut Stock �� $ 124.99 Rugged, all-steel construction withstands up to 300 pounds of stress pressure, so it won’t fail under hard use. SPECS: Steel, MIL-DTL-16232 manganese phosphate coated, black. 3 2" (5cm) long x 1" (2.5cm) wide. Projects /16" (4.8mm) from rail. 1.3 oz. (87g) weight. #100-006-197KW Magpul RSA Rail Sling Attachment �� $ 29.99 TEXAS WEAPON SYSTEMS AK-47/74 DOG LEG™ SCOPE MOUNT ab For Easy Installation Of An Optic On Your AK-Pattern Rifle

Snap-on scope mount with integral dust cover attaches directly over MEPROLIGHT AK-47/AKM the receiver to provide a secure platform for a red dot sight or other optic, while preserving your AK’s field stripping capabilities. Preserves NIGHT SIGHT SET the balance of your rifle, while also giving you a generous 6¾" MIL-STD 1913 Picatinny rail for mounting the optic with correct eye relief. Replaces the factory-issue dust cover and rear sight leaf. A simple cam-lock release button lets you remove the Dog Leg quickly when Upgrade Your AK With it’s time to field strip your rifle. The cam lock system centers the cover tightly against the receiver and helps ensure the optic returns to State-Of-The-Art Self- zero when the Dog Leg is reinstalled. Adjustment tab lets you custom fit the rail to your individual weapon. Optional bolt-on Backup Sight Illuminating Night Sights has .071" rear peep sight that aligns with the factory front sight to give you an extra CQB sighting option in the event of optic failure. Steel crossbolt locks sight securely on rail. Sold separately. This front/rear night sight SPECS: 6061 T-6 aluminum, hardcoat anodized, matte black. Fits most AK-pattern rifles, including stamped and milled receivers with fixed, under- set uses self-illuminating Tritium inserts to give you a bright, clear, folder, or side-folding stocks. Will not fit Yugo AKs. May require some fitting. Sight – .071" (1.8mm) diameter aperture. sharp sight picture, even in low light. In normal daylight they look #100-008-571KW Dog Leg Scope Mount Gen II �� $ 139.99 #100-008-572KW Backup Sight �� $ 39.99 like white dot sights, still providing enhanced sigting capability over plain black “iron” sights. These sights are direct replacement for standard weapon sights and are easy to install, requiring no modifications to the gun. Fits AK-47/AKM pattern rifles chambered in 7.62 x 39mm, including Russian, Polish, Hungarian, Romanian, and Egyptian rifles graduated to 1,000 meters. Rugged all-steel sight body with matte black finish. Meprolight has long produced VLTOR AK-47 some of the brightest sights available anywhere, with their sights COLLAPSIBLE STOCK ADAPTER ab installed on many military rifles all over the world. #387-000-065KW Meprolite Night Sight Set ��$ 150.40 Gives Your AK The Adjustability & Convenience Of An M4 Stock Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware. SPECS: Aluminum, hardcoat anodized, matte black finish. 8" (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the RED STAR ARMS AK-47 Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14" dia. buffer tube. Kit includes stock extension, end ADJUSTABLE MILITARY TRIGGER KIT ab cap, mounting bolts, nut, (3) dust plates, and installation instructions. #100-003-177KW AK-47 Stock Adapter �� $ 89.99 Clean Breaking Trigger Helps Improve Performance Competition- grade hammer, BLUE FORCE GEAR trigger, and disconnector are VICKERS COMBAT APPLICATIONS SLING ab fully adjustable for takeup, overtravel, pull weight and disconnector engagement. Pull adjusts from 4 to 8 lbs., with a two-stage or Adjusts Quickly, Won’t Tangle Or Twist single-stage pull. U.S. made, qualifies as three of the required parts Two-point sling with quick adjustment strap lets the operator change sling length for compliance with the 922 law. Drop-in installation, may require without creating loose ends that can tangle with other gear. Allows for a variety of carry minor fitting. and shooting positions based on the required tactical response. Fits rifles and carbines SPECS: Steel, black, matte finish. Deep case hardened and heat with side sling swivels that have 11/4" wide loop. Composed of two, separate sections treated to Rc 56-58. Fits milled or stamped 7.62x39, 5.45x39, AND of Cordura® nylon webbing; 17" forearm end, including quick adjustment loop, and 5.56mm receivers. Includes detailed installation instructions. 30" rear buttstock end; joined together with a high-strength steel loop. The sliding #713-000-015KW AK-47 Trigger Kit �� $ 84.99 adjustment buckles are made of tough molded Acetal military-grade hard polymer. Combat-proven; deployed with all branches of U.S. military. Developed by Larry TRIGGER PIN RETAINER PLATE Vickers, noted firearms expert and former operational member of 1st SFOD Delta (aka Saves the frustration of trying to get “Combat Applications Group”). the factory spring’s “crook” back into SPECS: Cordura® nylon web, Black or Coyote. Steel mid-section connector. Acetal hard the receiver. Fits all AK-47 and SAR-3 receivers. polymer adjustment hardware. 1¼" (3.1cm) wide. Adjusts 39" (99cm) to 65"(165cm) OAL. SPECS: Steel, black, matte finish. #100-009-562KW Vickers Sling, Black/Acetal �� $ 45.00 #713-000-017KW Trigger Pin Retainer Plate �� $ 4.99 #100-009-563KW Vickers Sling, Coyote/Acetal �� 45.00

OFFICE / 12 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 HI-LUX OPTICS BATTLECOMP CMR 1-4X24 RIFLE SCOPES ENTERPRISES AK-47 High-Resolution, Military-Grade Optics With Iluminated Reticle BATTLECOMP ab Hi-Lux Optics has developed a series of innovative, military grade optical sights Multi-Mode Compensator for sportsmen, competitive shooters and armed professionals at affordable prices. Reduces Muzzle Climb & Forged from high strength aluminum, Hi-Lux scopes have glass lenses polished Suppresses Flash to photographic quality and multicoated for exceptional clarity and light gathering capability. Every scope is waterproof, shockproof, and fog-proof. The compact Designed specifically to help 1-4x24mm CMR (Close Medium Range) doesn’t add unnecessary bulk or weight to your rifle and is ideal for a variety of semi-auto and you maximized the performance of your AK, this multi-purpose full-auto rifles or carbines. The 30mm tube produces a bright target image while the Illuminated, dual ring reticle draws the shooter’s eye to compensator reduces muzzle climb, so you stay on target the center of the sight picture for fast target acquisition. Easily adjust the reticle’s brightness with an eleven setting rheostat. Reticle provides between shots during rapid fire engagements. Reduces flash quick ‘no-math’ range finding of distant targets. Aiming points have been calibrated for .223 and .308 service rounds for long range targets. signature and produces less concussion than the standard AK flash The “Zero Locking System” allows you to make minor windage and elevation adjustments when needed, then return to the original setting. hider for a smaller dust signature when shooting prone. The CMR-AK762 is identical to the CMR, except it has been specifically designed for the 7.62x39mm, the .300 Blackout and the .300 SPECS: Machined 17-4 PH stainless steel with MIL-DTL 13924D Class Whisper V-Max. Bullet drop compensating hold over lines for 7.62x39mm ballistics out to ranges of 600 and 900 meters. Hold over lines IV black oxide finish. 2.6" (6.6cm) OAL x .900" (22.9mm) O.D. Fits AK- can be used to 550 meters for rifles in .300 BLK or .300 Whisper. At 4x magnification the reticle features can be used for estimating ranges 47/AKM pattern rifles chambered in 7.62 x 39mm with 14 x 1 LH muzzle at 1,000 meters. Illuminated reticle features circle and dot, available in either red or green. threads. Pre-notched for the 12 o'clock pin. Spring washers included. SPECS: Aluminum tube, Perma-Coat, matte black finish. Uses a CR2032 battery, included. MAG/OBJ.: 1-4x24mm Adj. Range Click Value: ½ MOA. #100-009-349KW AK-47 Battlecomp �� $ 189.99 Eye Relief: 3"/7.62cm. Wgt.:16.5 oz. /467g. 10.2"/ 25.9cm OAL. #100-012-255KW CMR Scope, Green �� $ 339.99 #100-012-257KW CMR-AK762 w/MOA scale, Green �� $ 436.99 #100-012-256KW CMR Scope, Red �� 339.99 #100-012-258KW CMR-AK762 w/MOA scale, Red �� 436.99 BUTLER CREEK AK-47/GALIL L.U.L.A. MAGAZINE LOADER/UNLOADER MAGPUL AK-47/74 Load & Unload Magazines ® Fast; Saves Overworked MOE AK/AK+ GRIPS ab Fingers & Thumbs Comfortable Shape & Anti-Slip Surface Enhance Weapon Control Tough, lightweight, reinforced, Magpul Original Equipment grip delivers the same ergonomic benefits as the AR-15 MOE version, with minor polymer loader/unloader saves adaptations for AK platforms. Like the AR line, this one-piece polymer upgrade easily replaces a standard factory fingers, thumbs, and wasted pistol grip and is designed to fill the natural contours of your hand for a comfortable, solid grasp and stabilized shots. time. Extends magazine life and Removable black polymer cap in bottom reveals internal storage compartment for small items; accepts Magpul AR- lessens wear and tear on feed lips. 15 MIAD® Grip Cores, sold separately. AK grips have aggressive crackle texturing on the sides and deep horizontal Staggered, triangular pieces of plastic serrations on the front and rear straps help you maintain excellent traction in any environment. AK+ grips are securely grasp rounds for effortless overmolded with non-slip synthetic rubber to give you an exceptionally firm purchase on the grip for more psitive control. loading/unloading when you move SPECS: Reinforced molded polymer, Black, Flat Dark Earth (FDE), O.D. Green, or Stealth Gray. 4.13" (10.49cm) maximum length, 2.1" (5.3cm) wide the lever back and forth. Reinforced polymer. Fits all Ak-47/AKM at base, 1.21" (3.07cm) maximum thickness. 2.86 oz. (81.08g) wt. w/hardware. Compatible with milled and stamped AK-47/AKM receivers, reinforced (7.62 x 39mm) and Galil (5.56/.223) metal and plastic magazines. and non-reinforced receivers, underfolders, and all common grip nuts. Mounting screw included. Depending on receiver tolerance, may require #100-001-414KW AK-47 Mag Loader �� $ 26.99 some fitting. #100-011-612KW MOE AK Grip, Black �� $ 19.90 100-016-416KW MOE AK+ Grip, Black �� $ 23.70 #100-011-613KW MOE AK Grip, FDE �� 19.90 100-016-417KW MOE AK+ Grip, FDE �� 23.70 #100-011-614KW MOE AK Grip, O.D. Green �� 19.90 100-016-419KW MOE AK+ Grip, O.D. Green �� 23.70 KREBS AK-47/74 #100-011-615KW MOE AK Grip, Stealth Gray �� 19.90 100-016-418KW MOE AK+ Grip, Stealth Gray �� 23.70 MK-VI ENHANCED SAFETY Operate Your Kalashnikov’s Safety While Maintaining A RS PRODUCTS AK-47/AKM Firing Grip AK-303 Full Length Rail AKM SCOPE MOUNT ab Stamped steel safety lever features a finger shelf that helps For Easy, Secure Installation Of 30mm Red Dot Sight you flip safety on or off without moving your firing hand off the pistol grip. Includes bolt hold-open notch that lets you lock bolt Incredibly versatile mounting system clamps directly to side rail of Kalashnikov- to the rear. Fits standard AK-47 and AK-74 rifles. Front tension pattern rifles for “bank-vault” strong attachment of optics. Unique design positions detent located for standard AK, not Saiga pattern rifles. Matte black optic directly over the centerline to allow it to co-witness with iron sights and features painted finish matches most Kalashnikovs. Heat treated to Rc50 to a quick release lever that allows the optic to be removed and reinstalled without tools. withstand hard use. Two-piece design gives options for mounting position and eye relief. Front Lower AKM 30mm Reflex Optics Upper SPECS: Stamped 1050 steel, matte black finish. 4½" (11.4cm) long, 1¼" Mount gives 3" mounting space along the front half of the receiver. Rear Lower Mount (3.2cm) high, .04" (1mm) thick. 1.2 oz. (33g) wt. gives 3" mounting space along the rear half of receiver. Full Length Lower Mount gives AKOG ACOG/BCO Mount Upper Mount #497-000-011KW MK-VI Enhanced Safety �� $ 58.99 6" mounting space along the receiver. AK310 Full Length Lower Rail fits Romanian M10 and Yugo OPAP and NPAP rifles. 30mm Upper Mount gives a single-ring attachment for 30mm red dot optic. AKML Upper Mount fits the Aimpoint T-1 and H-1. AKOG Upper Mount fits Trijicon ACOG sight system. Complete system requires one upper mount and one lower mount. AKR Upper Mount gives Picatinny upper rail that fits onto any RS REgulate lower mount. All mounts sold separately. LUCID #100-011-181KW Full Length Lower Mount ��$ 119.00 #100-011-184KW 30mm Upper Mount �� $ 60.00 #100-011-182KW Rear Lower Mount �� 119.00 #100-011-560KW AKML Red Dot Upper Mount �� 60.00 HD7 RED DOT SIGHT #100-011-183KW Front Lower Mount �� 119.00 #100-011-561KW AKOG Upper Mount �� 60.00 Versatile Sight With 4 100-013-589KW AK310 Flull Length Lower Rail �� 119.00 #100-011-749KW AKR Picatinny Mount Upper Rail �� 65.00 User-Settable Reticle Styles & 7 Brightness Settings

Red dot sight gives the user a choice of four different BUSHNELL reticles based on the trajectory TRS-25 RED DOT SIGHT of a 55-grain 5.56 bullet. Reticle styles are: 2 MOA dot, circle Single-Focus Sighting Plane Gets You On Target Fast dot, crosshair with holdover dots, and chevron with holdover dots. Automatic brightness setting adjusts to ambient light conditions; Non-magnifying (1x) sight delivers the benefits of fast, accurate, red dot sighting, plus the durability of also has 7 user-selectable brightness settings. Integral mount waterproof, fogproof, shockproof Bushnell-quality optics. Bright red 3 MOA dot provides precise, both- clamps to standard Picatinny rail and gives proper height for lower eyes-open shooting to get you on target fast without sacrificing accuracy. Eleven position rheostat one-third co-witness with iron sights. Unlimited eye-relief give you allows the shooter to match the brightness of the dot to specific shooting conditions. Easy-to-grasp plenty of flexibility in mounting position. Elevation and windage control knob to adjust brightness. Amber-Bright™ multi-coated optics provide a clear, crisp sight knobs give 1/2 MOA adjustments, and covers are leashed to prevent picture; unlimited eye relief helps you get on target fast. Adaptable for rifle, shotgun, or handgun use. Available with a built-in low-profile loss in the field. 1 Picatinny/Weaver-style (Lo-Pro) mount or with a high-rise mount for flattop AR-15 rifles that gives /3 co-witness with iron sights. SPECS: Cast aluminum frame. 51/2" (13.9cm) long, 3" (7.6cm) high, 1 1 SPECS: Aluminum body, anodized, black finish. 25mm (1") dia. objective lens. 2 /2" (6.4cm) long. 4 oz. (113g) wt. 70 MOA adjustment with /2 MOA 21/2" (6.3cm) wide. 13 oz. (368g) wt. Runs on one AAA battery life, not clicks. Up to 3,000 hours of operation on a single battery. Lens covers and CR-2032 battery included. included. Auto-shutoff after 2 hours. Battery life up to 1,000 hrs. #593-000-054KW TRS-25 Red Dot, Lo-Pro Mount �� $ 99.99 #590-300-037KW TRS-25 Red Dot, Hi-Rise Mount �� $ 109.99 #100-013-381KW Lucid HD7 Red Dot Sight �� $ 189.00

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 13 Brownells.com/dream13

NORTH EASTERN ARMS AR-15 AIMPOINT 1 COMPACT CARBINE STOCK 4 PATROL RIFLE OPTIC Shorter Than An M4 Stock When Retracted Rugged, Reliable & Versatile - Designed for the professional operator, this two-position stock can be quickly Always Ready deployed with a simple pull and collapsed by depressing the locking mechanism. Made of durable 6061 T6 aluminum and 4140 steel, stock is 27/8" shorter than a traditional Parallax-free, non- M4 stock when compressed. Drop in stock comes complete with adapter, buffer tube, spring, and a modified full-auto bolt carrier buffer. magnifying red dot sight SPECS: 6061 T6 aluminum, matte black Cerakote finish. 4140 steel, ARC+ Nitriding treated, matte black. Composite butt plate. Stock is compatible is ready at all times, with with most mil spec AR-15’s. no switches or levers to #100-015-146KW Compact Carbine Stock �� $ 329.00 fumble with. Simply install the supplied battery, turn the PRO on, and forget about it – for up to 3 years! 2 MOA center-dot, with 6 BRAVO COMPANY AR-15/M16/AR-308 daylight and 4 night vision 2 BCM GUNFIGHTER CHARGING HANDLE ab brightness settings, enables accurate target engagement under a broad variety of conditions. Includes a detachable spacer that Unique Latch Mechanism Reduces Wear & Prevents Breakage allows co-witnessing with the standard iron sights on AR-15/M16/ M4 weapons. Or remove the spacer to install the PRO on shotguns Heavy-duty charging handle has an or submachine guns. Integrated “rail-grabber” mount with knurled, oversized latch that distributes pull force evenly oversized knob aids in quick attach/detach on Picatinny rails. for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from Compatible with all generations of night vision devices; may also breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal be used with Aimpoint 3x Magnifier and Concealed Engagement reinforcing the stress points to stand up to hard operational use. Available with Medium length Ambidextrous Medium Large Unit. Flip-up lens caps included. extended latch or Large latch that’s ¼" longer for an even bigger, “can’t miss” grasping surface. 1 SPECS: Hard-anodized aluminum, black. 5 /4" (13.3cm) OAL. 3" (7.6cm) Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased high, including spacer. 13 oz. (368.g) wt. 1x magnification. 30mm tube strength and dependability. Ambidextrous model features latches on both sides for left- or right-handed operation. Fits only AR-15/M16. dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Waterproof 7 SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 6 ⁄8" (17.5cm) long. Models available to fit mil-spec AR-15/ to 150' (45m) depth. One DL1/3N lithium battery, included. M16 or most AR-style .308 upper receivers. .308 fits ArmaLite® AR-10®, DPMS LR-308, Knight’s Armament SR-25/MK11/M110, LaRue OSR, Noveske 308, and Patriot Ordnance Factory P-308; does not fit Rock River Arms or SIG 716. #100-009-902KW Aimpoint Patrol Rifle Optic �� $ 424.00 #100-005-368KW AR-15 BCM Charging Handle, Large �� $ 47.99 #100-011-527KW AR-15 BCM Ambidextrous Charging Handle �� $ 71.99 #100-005-369KW AR-15 BCM Charging Handle, Medium �� 47.99 #100-009-443KW AR-308 BCM Charging Handle, Large �� 57.99 #100-009-442KW AR-15 BCM Charging Handle, Small �� 47.99 #100-009-444KW AR-308 BCM Charging Handle, Medium �� 57.99 IMPACT WEAPONS MAGPUL® AR-15/M16 COMPONENTS ® Rear Sight 3 MBUS GEN 2 SIGHT SYSTEM ab QD SLING MOUNT-N-SLOT ab Reliable, Low-Profile, Quick-Deploy Backup Sights Direct Sling Attachment Point For Magpul® MOE® Handguards Low-profile, flattop-mounted, polymer sights deploy instantly at Front Sight the touch of a finger to provide backup sighting if a primary optic fails. The Mount-n-Slot is a receptacle for a Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release QD pushbutton sling swivel that attaches mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight directly to your rifle’s MOE handguard with when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel no need for a separate bolt-on rail section. crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" Position it in any slot on the handguard so your sling attaches peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails. Front sight must be mounted on a exactly where it works best for you. Smooth, minimal-profile cone- ® railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE shaped design uses the barest minimum of handguard real estate handguard. Sets contain a front and a rear sight. and eliminates risk of snagging on the sling or other gear. Accepts SPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Heights measured from top of rail to top of sight. standard or heavy-duty pushbutton sling swivels. Full Rotation Rear Sight - 1.5" (3.8cm) long deployed, 2.6" (6.8cm) long folded, 1.2" (3cm) wide, .5" (1.3cm) high folded, 1.6" (4cm) high extended. Large aperture, allows 360° rotation of the swivel. Restricted Rotation limits .185" (4.7mm) diameter. Small aperture, .070" (1.8mm) dia. Front Sight - 1.5" long deployed, 2.5" (6.3cm) long folded, 1.2" wide, .5" high folded, 1.5" rotation to prevent sling twist and wrap up. high extended. Sight post, .070" (1.7mm) wide. SPECS: Machined 6061 T6 aluminum, MIL-A-862SF Type III hardcoat #100-006-941KW MBUS2 Sight Set, Black �� $ 89.99 #100-014-406KW MBUS2 Rear Sight, Stealth Gray �� $ 55.05 anodized, matte black. Fits all Magpul MOE handguards and Bushmaster 100-007-327KW MBUS2 Sight Set, Dark Earth �� 89.99 #100-006-791KW MBUS2 Front Sight, Black �� 37.95 ACR rifle (standard configuration only). Comes with all required mount- #100-006-787KW MBUS2 Rear Sight, Black �� 55.05 #100-006-792KW MBUS2 Front Sight, Dark Earth �� 37.95 ing hardware and instructions. #100-006-788KW MBUS2 Rear Sight, Dark Earth �� 55.05 #100-006-793KW MBUS2 Front Sight, O.D. Green �� 37.95 #100-006-825KW Mount-n-Slot, Full Roation �� $ 32.95 #100-006-789KW MBUS2 Rear Sight, O.D. Green �� 55.05 #100-014-400KW MBUS2 Front Sight, Stealth Gray �� 37.95 #100-006-826KW Mount-n-Slot, Limited Rotation �� 32.95

OFFICE / 14 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401 2 3 4 5 6

9 COMPACT ar-15 8 Brownells.com/dream13

MAGPUL® AR-15/M16 5 MOE® HANDGUARD ab Gives A Secure, Comfortable Grip, Better Weapon Control & Versatile 7 Accessory Mounting BRAVO COMPANY Combines the slim profile of the USGI plastic handguard with more comfortable ergonomics and the accessory mounting versatility of A2XTM EXTENDED FLASH SUPPRESSOR aluminum railed handguards. Trapezoidal cross-section and ridges on the underside help the operator maintain a secure grip for better weapon control. Integral aluminum heat shield protects hand from hot barrel, while side extensions and a pronounced lip at the front Extends 14½" Barrels To Minimum Non-NFA Length edge prevent the hand from slipping forward onto the hot gas block. Horizontal slots at the 2, 6, and 10 o’clock positions let you install bolt-on accessory rails, exactly where you want to mount accessories. Snaps onto rifles equipped with Delta ring and round or triangular When mounted in accordance with BATF specifications for a handguard cap. Plenty of internal clearance to fit on rifles equipped with a gas piston conversion. permanent installation, this A2-pattern flash suppressor will bring SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, Stealth Gray, or Pink. Fits AR-15/M16/M4 rifles equipped with Delta ring and a 14½" barrel up to a civilian-legal (non-NFA) 16.1" length. Comes 3 round or triangular handguard cap. Carbine – 7" (17.8cm) OAL. Requires 6 ⁄8" between Delta ring and handguard cap. Rifle – 12½" (32cm) OAL, Re- with a pre-drilled hole and pin for pernmanently pinning to the 3 quires 11½" (29.2cm) between Delta ring assembly and handguard cap. Mid-Length – 9¼" (23.4cm) OAL. Requires 8 ⁄16" between Delta ring assembly barrel. Fits standard AR-15/M16 muzzle threads. Installation should and handguard cap. be done by a qualified gunsmith familiar with BATF regulations. #100-004-152KW MOE Carbine Handguard, Black �� $ 23.70 100-008-914KW MOE Rifle Handguard, O.D. Green �� $ 37.95 SPECS: 4150 steel, MIL-STD-171 phosphate finish, matte black. 2" #100-004-153KW MOE Carbine Handguard, Dark Earth �� 23.70 100-014-458KW MOE Rifle Handguard, Stealth Gray �� 37.95 (5cm) long. Fits barrels with ½"-28 tpi muzzle threads. Includes crush washer and retaining pin. #100-004-154KW MOE Carbine Handguard, O.D. Green �� 23.70 #100-006-194KW MOE Mid-Length Handguard, Black �� 33.20 Extended A2 Flash Hider �� 100-014-456KW MOE Carbine Handguard, Stealth Gray �� 23.70 100-008-910KW MOE Mid-Length Handguard, Dark Earth �� 33.20 #100-014-187KW $ 34.99 100-011-397KW MOE Carbine Handguard, Pink �� 23.70 100-008-911KW MOE Mid-Length Handguard, O.D. Green �� 33.20 #100-006-195KW MOE Rifle Handguard, Black �� 37.95 100-014-457KW MOE Mid-Length Handguard, Stealth Gray �� 33.20 100-008-913KW MOE Rifle Handguard, Dark Earth �� 37.95 ALG DEFENSE AR-15 SPIKE’S TACTICAL AR-15/M16 8 ENHANCED MILITARY-STYLE 6 HAMMER FORGED CARBINE BARREL TRIGGERS ab

Weight-Saving Profile For 16" Gives A Smoother Enhanced Maneuverability; Pull While Preserving Mid-Length Gas System For Reliability Added Reliability 14½" Trigger/hammer kits These carbine barrels are hammer forged for Spike’s by FN, and are chrome lined and finished to M-249 specs for durability. Both feature rugged military- models drilled for a mid-length gas system for extra reliability, with a slimmed-down profile between the barrel extension and gas port to type components carefully save weight. Barrel extension has M4 feed ramp cuts. 16" is slimmer at muzzle than standard carbine barrel. 141/2" Lightweight provides prepped to give a smoother even more weight savings and minimum length for quick maneuverability. All NFA rules apply. trigger pull while maintaining SPECS: Chrome-moly-vanadium steel, manganese phosphate finish, matte black. Muzzle threads: 1/2"-28 tpi. Chambered in 5.56 NATO with 1-7" the original geometry for twist rifling. 16"- 161/2" (40.6cm) O.A.L. Barrel tapers from .680" to .655" (17.2mm to 16.6mm) under handguard. .750" (19mm) O.D. at gas port, .650" maximum reliability. These (16.5mm) O.D. at muzzle. 141/2" Lightweight - 141/2" (36.8 cm) O.A.L. .660" (16.7 mm) O.D. under handguard, .750" (19 mm) O.D. at gas port, and .645" are “enhanced standard” (16.3mm) O.D. at muzzle. triggers, so the armorer #100-008-908KW 16” Carbine Barrel �� $ 279.99 #100-008-909KW 141/2” Lightweight Carbine Barrel �� $ 259.99 continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision- honed to smooth and lighten the pull to around 61/2 lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and MAGPUL AR-15/M16 nickel-Teflon coating on the hammer, disconnnector, and pins to ® increase surface hardness and reduce friction, with an average pull 9 MOE+ PISTOL GRIP ab weight of about 6 lbs. Both kits also available with a DPMS Lower Parts Kit that includes all the internal parts you need to install a Gives You A Comfortable Hold For Better Handling complete fire-control system with a QMS or ACT trigger. The Magpul Original Equipment (MOE) grip is a durable, economical, easy-to-install replacement for the factory SPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high- pistol grip that gives you a solid, secure grasp. Rigid, fully supported one-piece construction from the same carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly reinforced, high-impact polymer, with an anti-slip overmolded rubber coating for enhanced weapon control in steel. Both kits contain trigger, trigger spring, hammer, hammer spring, wet conditions or when hand is sweaty. Curved beavertail fills the grip-to-receiver junction to help you maintain disconnnector, disconnnector spring, hammer and trigger pins, and a comfortable hold and protect the web of your hand during sustained firing. A polymer cap secures small items instructions. inside the internal storage compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately). Fits #100-009-796KW QMS AR-15 Trigger Set �� $ 45.00 standard mil-spec AR-15/M16 lower receiver, plus any AR-style .308 rifles that accepts an AR-15/M16 pistol grip. #100-010-634KW QMS AR-15 Trigger Set w/Parts Kit �� 73.99 #100-006-786KW MOE+ Grip, Black �� $ 22.75 #100-007-572KW MOE+ Grip, O.D. Green �� $ 22.75 #100-009-797KW ACT AR-15 Trigger Set �� 64.99 #100-007-570KW MOE+ Grip, Dark Earth �� 22.75 100-014-441KW MOE+ Grip, Stealth Gray �� 22.75 #100-010-635KW ACT AR-15 Trigger Set w/Parts Kit �� 93.99

ORDERS / order on TECH 800-741-0015 the web: BROWNELLS.COM/DREAM 15 Brownells.com/dream13 General Products

DPMS AR-15 AERO PRECISION AR-15 LRPK-1 AR-15 Lower Receiver Parts Kit STRIPPED LOWER RECEIVER ab All The Small Parts Strong, Basic Mil-Spec Receiver Ready For Your Next Custom Build To Complete The Bottom Half Stripped, small pin, semi-auto lower receiver is precision machined from a durable, 7075 T6 aluminum forging. Stamped “Cal Multi,” this versatile mil-spec receiver can be the Easiest way to foundation for rifle builds on 5.56/.223, 6.5mm, 6.8mm, 300 AAC Blackout, 9mm Luger, complete a stripped or other chamberings that fit the standard AR-15 receiver. Holes, inletting and pin locations have been cut to final dimensions and accept lower receiver or standard AR-15 magazines and components. Clearly stamped safe/fire switch position indicators ensure that you can easily identify the rebuild a battle-weary service state of the rifle. Available with standard hard-anodized finish or extra-hard, long-lasting Cerakote finish. STS model is designed to one! Kit includes all accept short throw safeties, such as the Battle Arms Ambidextrousw Short Throw 45 (#100-009-866), that require the fire position at 45°, the internal small 60° or 90° (so it will also work with the standard selector). parts: mil-spec trigger, SPECS: 7075 T6 aluminum, hardcoat anodized, matte black, or Cerakote finish in matte Sniper Gray (SG) or Desert. Small pin, .154" (3.9mm) ham- hammer, A2 pistol mer/pin holes. .250" (6.3mm) pivot/takedown pin holes. FFL required for purchase. grip, trigger spring, #953-000-001KW AR-15 Stripped Lower Receiver ��SALE $ 67.99 100-013-289KW AR-15 Stripped Lower Receiver, Desert Cerakote ��$ 109.99 trigger pin, hammer 100-015-121KW AR-15 Stripped Lower Receiver, SG Cerakote �� 109.99 100-015-248KW STS Stripped Lower Receiver �� 99.99 spring, hammer pin, disconnector and spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent spring, (2) takedown detents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, screw and COMPETITION ELECTRONICS washer, triggerguard assembly and pin. AR-15 POCKET PRO II ab #231-115-003KW LRPK-1 Complete Lower Parts Kit ��SALE $ 49.99 32-ROUND 9mm MAGAZINE ab Packed With Features Rugged, All Steel High Capacity Magazine To Help You Improve Your Speed MAKO AR-15/M16 Made of durable heat treated steel, this rugged GL-MAG SURVIVAL STOCK high capacity magazine fits 9mm AR-15 conversions Digital shot timer is that accept Colt style magazines. The Xylan finish easily configured for the Keep An Extra greatly reduces friction while offering excellent information you need to Magazine Always On protection against wear and corrosion. Reliable know when practicing your and smooth ammunition feed is ensured by a steel shooting to you improve your Your Rifle follower that will not twist under a full load. The speed and ultimately your numbered round count windows let you quickly Reinforced polymer match scores. Main screen determine the amount of remaining ammunition. stock fits onto M4 allows you to set-up the timer to display only the information you Comes with bolt hold-open tab for those ARs fitted Carbine style buffer want to see. Review four shots at once with shot numbers, times, with a hold-open feature on the conversion block. tube and lets you keep a and splits on the LED screen. Keep track of your shot time with Maintenance and cleaning is made quick and simple loaded magazine on the shot number, split and start delay type. Adjusts for shot sensitivity with the easy-to-remove floorplate. rifle at all times. Includes via the display menu and shot dead time to eliminate echoes while SPECS: All steel body. Matte black Xylan finish. Steel fol- polymer 10-round shooting. Onboard date/time display lets you keep complete lower and spring. Removable steel floorplate. Fits 9mm magazine, and accepts all records as you chart your progress, and internal memory stores up AR-15 rifles that accept Colt-style magazines. other standard-sized AR to 100 shots. magazines. Quick-release #078-000-320KW 32-Rd 9mm AR-15 Mag, Each ��SALE $ 27.99 #225-000-001KW Blue Pocket Pro II ��$ 129.99 gives instant access to 078-000-198KW 32-Rd 9mm AR-15 Mag, 3-Pak �� 92.99 #100-011-303KW Gray Pocket Pro II �� 139.99 extra magazine and under-stock position keeps magazine from getting caught on gear or webbing. Unique inverted positioning lever makes it easy to adjust length, but blends into the contours of the stock. Fits both Mil-Spec and Commercial diameter tubes, and features integrated ambidextrous QD sling connectors and thick rubber buttpad with positive no-slip texture. Buffer tube not included. TM SPECS: Reinforced molded polymer. 7¼" (18.4cm) long. 5" (12.7cm) high. 14 oz. (400g) wt. Includes one 10-rd polymer magazine. Rifle Handguard #100-011-409KW GL Mag Survival Stock �� $ 108.65

MAGPUL AR-15/M16 Carbine Handguard FREE Standard Shipping ASAP® SLING ADAPTER ab DOUBLE STAR on all orders and MORE when you FREE-FLOAT HANDGUARD Gives You A Major Tactical Pistol Handguard become a member! Advantage With 180° Of Includes Barrel Nut For Fast Installation Unrestricted Sling Movement Machined aluminum handguard mounts onto your AR-15 and Ambidextrous Sling Attachment Point free floats the barrel to relieve stress and help enhance accuracy helps the operator adapt quickly to changing potential. Fits all standard size uppers and includes barrel nut for tactical situations by rapidly switching fast and easy installation. Accepts standard barrel nut wrenches weapon from one shoulder to the other. An and features knurled center section for secure grip. Rifle unrestricted 180° of sling movement lets you change shoulders handguard has 5 longitudinal flutes to save weight, and 10 slots cut to take maximum advantage of available cover, address targets in the muzzle end to help improve air flow and help speed cooling. around corners and other barriers, or shift weapon position if one Carbine handguard has 8 longitudinal flutes to save weight. Pistol Sign up now! arm is injured. Works with any single-point sling that attaches handguard has no flutes or slots. Join the EDGE before with a quick-release snap-hook, and fits any AR with an M4- SPECS: 6064 T6 aluminum, hardcoat anodized, matte black finish. type adjustable buttstock. Remove factory receiver end plate 2"(5cm) O.D., 1¾"(4.4cm) I.D. Includes barrel nut. Rifle – 12.5" (32cm) May 1st for a chance to and replace with the ASAP; keep the original receiver extension, long, 13.1 oz. (371g) wt. Carbine - 7" (18cm) long, 8.1 oz. (229g) wt. win an STI Edge pistol! buttstock, and sling. Pistol – 4" (10cm) long. 5.3 oz.(150g) wt. SPECS: Steel, Parkerized, matte black. Fits both mil-spec and com- #100-012-509KW Rifle Handguard �� $ 64.99 mercial/universal M4-type receiver extensions. #100-012-511KW Carbine Handguard �� 44.99 Go to brownells.com/EDGE to learn more. #100-004-450KW ASAP Sling Adapter �� $ 29.99 #100-012-510KW Pistol Handguard �� 44.99

OFFICE / 16 SERIOUS ABOUT FIREARMS SINCE 1939 TECH 641-623-5401